Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
3 Pages  1 2 3 >Bottom

Outline · [ Standard ] · Linear+

 Intel® Core(tm)2 Duo/Quad Overhauled Rev. 3, The journey continues....

views
     
TStAmp0i
post Jul 23 2007, 10:56 AM, updated 19y ago

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



Welcome to Core 2 Duo/Quad thread. Enjoy your stay and we hope you will get your best overclocks with the help of our fellow Lowyatians smile.gif

Include a screenie and specify your motherboard, processor, memory and cooling used...

All About Intel(R) Core(tm)2
Fundamentals Of Overclocking Core 2 Duo/QuadMotherboard Tuning GuideSystem Stress TestCooling GuideAllendale
- E2140
  • 18.360 - davidletterboyz - 3.23GHz, 404 x8 / Abit AW9D-MAX / 2GB DDRII-1010, 4.0-4-4-6 / Intel Factory Heatsink
  • 18.391 - goldfries - 3.33GHz, 417 x8 / Biostar TForce TP35D2-A7 / 2GB DDRII-834, 4.0-4-4-12 / Xigmatek HDT-S963
  • 18.485 - rlhc17 - 3.30GHz, 412 x8 / DFI Infinity P965-S / 2GB DDRII-824, 3.0-3-3-8 / Swiftech WC
  • 18.516 - Vtec(Rock) - 3.39GHz, 424 x8 / Biostar TForce TP35D2-A7 / 2GB DDRII-???, ?-?-?-? / Noctua U12F
  • 18.531 - flatfinger - 3.25GHz, 406 x8 / Biostar TForce 965PT / 2GB DDRII-1084, 5.0-5-5-12 / Intel Factory Heatsink
  • 18.656 - botak - 3.24GHz, 405 x8 / Gigabyte P35-DQ6 / 2GB DDRII-1012, 4.0-4-4-8 / ASUS Silent Square Pro
  • 20.015 - bryanyeo87 - 3.05GHz, 382 x8 / Gigabyte P35-DS3 / 2GB DDRII-916, 5.0-6-6-15 / Intel Factory Heatsink
  • 20.016 - goldfries - 3.32GHz, 416 x8 / Biostar TForce TP35D2-A7 / 2GB DDRII-832, ?-?-?-? / Intel Factory Heatsink
  • 20.609 - kucingfight - 3.00GHz, 376 x8 / Gigabyte P35-S3L / 2GB DDRII-752, ?-?-?-? / Thermaltake Big Typhoon
- E2160
  • 16.906 - kazama - 3.66GHz, 407 x9 / Intel D975XBX2 / 2GB DDRII-814, 4.0-4-4-12 / Thermaltake Big Typhoon VX
  • 17.093 - pedas - 3.60GHz, 400 x9 / Gigabyte P35-DS3 / 2GB DDRII-1000, 4.0-4-4-10 / Cooler Master GeminII

- E4300
  • 15.703 - botak - 3.64GHz, 405 x9 / Gigabyte P35-DQ6 / 2GB DDRII-1012, 4.0-4-4-8 / ASUS Silent Square Pro
  • 16.688 - kazama - 3.40GHz, 378 x9 / Intel D975XBX2 / 2GB DDRII-756, 3.0-4-4-8 / Thermaltake Big Typhoon VX
  • 17.484 - Raptureboy - 3.47GHz, 386 x9 / ??? / 1GB DDRII-772, 5.0-6-6-16 / ???
  • 18.031 - tone - 3.37GHz, 375 x9 / Gigabyte P965-S3 / 1GB DDRII-937, 5.0-6-6-17 / Custom WC
  • 18.296 - YiQi - 3.15GHz, 350 x9 / Abit AW9D-MAX / 2GB DDRII-874, 5.0-5-5-15 / Intel Factory Heatsink
  • 23.219 - suri - 2.61GHz, 290 x9 / Asrock 775Dual-VSTA / 2GB DDRII-580, 4.0-4-4-12 / Intel Factory Heatsink
- E4400
  • 17.078 - Hoodlums - 3.42GHz, 342 x10 / Gigabyte P35-DS3 / 2GB DDRII-855, 5.0-5-5-15 / Arctic Cooling Freezer 7 Pro
  • 19.957 - AREA51 - 2.95GHz, 295 x10 / Asrock 775Dual-VSTA / 2GB DDRII-590, 3.0-3-4-8 / Intel Factory Heatsink
  • 19.984 - smokey - 3.15GHz, 350 x9 / Gigabyte P35-DS3 / 2GB DDRII-700, 5.0-6-6-16 / Intel Factory Heatsink
Conroe
- E6300
  • 15.218 - storm88 - 3.76GHz, 538 x7 / Gigabyte P35-DQ6 / 2GB DDRII-1076, 4.0-4-4-6 / Custom WC
  • 15.422 - prescott - 3.70GHz, 528 x7 / Biostar TForce 965 PT / 2GB DDRII-1056, 5.0-4-4-8 / Custom WC
  • 15.922 - eXtreme(tm) - 3.50GHz, 501 x7 / DFI Infinity P965-S / 2GB DDRII-1002, 4.0-4-4-9 / Scythe Infinity
  • 16.125 - Hyde`fK - 3.43GHz, 490 x7 / DFI Infinity P965-S / 2GB DDRII-980, 4.0-4-3-4 / Thermaltake Big Typhoon VX
  • 16.157 - gtghost - 3.60GHz, 515 x7 / Biostar TForce 965 PT / 2GB DDRII-1030, 5.0-5-5-15 / Zalman CNPS 9700
  • 16.234 - Jian_yi - 3.60GHz, 515 x7 / Gigabyte P965-DS3 / 1GB DDRII-1030, 5.0-5-5-15 / Intel Factory Heatsink
  • 16.656 - p00ket - 3.48GHz, 498 x7 / Gigabyte P965-DS4 / 1GB DDRII-996, 5.0-5-5-13 / Zalman CNPS 9700
  • 16.719 - pcmoddingmy - 3.38GHz, 484 x7 / Biostar TForce P965 Deluxe / 2GB DDRII-968, 4.0-4-4-9 / Thermaltake Big Typhoon VX
  • 16.750 - Evogenix - 3.45GHz, 494 x7 / Gigabyte P965-DS3 / 2GB DDRII-988, 5.0-5-5-15 / NexXxoS Alphacool XP Modded Fitting
  • 16.781 - tAmp0i - 3.43GHz, 490 x7 / Gigabyte P965-DS3 / 1GB DDRII-980, 4.0-4-4-9 / Scythe Ninja
  • 16.906 - ddww - 3.38GHz, 484 x7 / Gigabyte P965-DS3 / 2GB DDRII-968, 5.0-5-5-15 / Gigabyte G-Power Lite
  • 16.922 - RokXIII - 3.49GHz, 499 x7 / ??? / 2GB DDRII-998, 5.0-5-5-15 / ???
  • 16.922 - BlackThyra87 - 3.40GHz, 486 x7 / Gigabyte P965-DS3 / 1GB DDRII-972, 4.0-4-4-10 / Cooler Master Hyper 48
  • 17.468 - siauann - 3.29GHz, 470 x7 / Gigabyte P965-DS3 / 2GB DDRII-940, 4.0-4-4-12 / Cooler Master Hyper 48
  • 17.516 - rlhc17 - 3.31GHz, 473 x7 / Gigabyte P965-DS3 / 1GB DDRII-946, 4.0-5-5-15 / Thermaltake Silent Water
  • 17.612 - horphi - 3.26GHz, 466 x7 / Gigabyte P965-DS3 / 2GB DDRII-932, 4.0-4-4-8 / Thermaltake Sonic Tower
  • 17.640 - Mooneyes - 3.35GHz, 479 x7 / Gigabyte P965-S3 / 1GB DDRII-958, 5.0-5-5-15 / Intel Factory Heatsink
  • 17.646 - titan-x - 3.27GHz, 467 x7 / Gigabyte P35-DS3 / 2GB DDRII-???, ?-?-?-? / Intel Factory Heatsink
  • 17.687 - remysix - 3.39GHz, 485 x7 / Gigabyte P965-DS4 / 1GB DDRII-970, 5.0-8-8-23 / Intel Factory Heatsink
  • 17.781 - vassalle - 3.29GHz, 470 x7 / Gigabyte P965-DS3 / 1GB DDRII-940, 4.0-4-4-13 / Thermaltake Big Typhoon VX
  • 17.829 - gengstapo - 3.22GHz, 460 x7 / Gigabyte P965-DS3 / 2GB DDRII-920, 5.0-4-4-12 / Thermalright XP-90
  • 18.406 - irenic - 3.15GHz, 450 x7 / Gigabyte P965-DS4 / 2GB DDRII-900, 4.0-5-4-13 / Intel Factory Heatsink
  • 18.422 - eltonchay - 3.29GHz, 470 x7 / Gigabyte P965-DS3 / 512MB DDRII-940, ?-?-?-? / Intel Factory Heatsink
  • 18.437 - prescott - 3.15GHz, 450 x7 / Gigabyte P965-DS3 / 2GB DDRII-900, 5.0-5-5-15 / Thermaltake Big Typhoon
  • 18.453 - MaGicDust - 3.15GHz, 450 x7 / Gigabyte P965-DS4 / 2GB DDRII-900, 4.0-5-4-15 / Arctic Cooling Freezer 7 Pro
  • 18.500 - yehlai - 3.04GHz, 435 x7 / Gigabyte P965-S3 / 1GB DDRII-1087, 4.0-4-3-9 / Intel Factory Heatsink
  • 18.610 - kev_neville - 3.22GHz, 461 x7 / Gigabyte P965-DS3 / 1GB DDRII-922, 3.0-5-5-15 / Cooler Master Hyper 48
  • 18.827 - Austin - 3.15GHz, 450 x7 / Gigabyte P965-DS4 / 2GB DDRII-900, 5.0-6-6-16 / Intel Factory Heatsink
  • 19.172 - csechuan - 3.01GHz, 430 x7 / Gigabyte P965-DS3 / 2GB DDRII-860, 4.0-4-4-12 / Intel Factory Heatsink
  • 19.454 - siewsphone - 3.03GHz, 433 x7 / Gigabyte P965-DS3 / 1GB DDRII-866, 5.0-5-5-12 / Intel Factory Heatsink
- E6320
  • 15.563 - botak - 3.32GHz, 475 x7 / ASUS P5B Premium / 2GB DDRII-950, 4.0-4-4-8 / Intel Factory Heatsink


- E6400
  • 15.125 - rlhc17 - 3.85GHz, 482 x8 / DFI Infinity P965-S / 2GB DDRII-964, 4.0-4-4-12 / Swiftech WC
  • 15.562 - alexwsk - 3.60GHz, 450 x8 / Abit IP35-E / 2GB DDRII-1080, 4.0-4-3-8 / Intel Factory Heatsink
  • 15.765 - kvmcom - 3.80GHz, 475 x8 / ASUS P5B Deluxe / 1GB DDRII-950, 4.0-5-4-5 / Intel Factory Heatsink
  • 15.828 - Henry - 3.70GHz, 463 x8 / Gigabyte P965-DS3 / 2GB DDRII-926, 4.0-4-4-12 / Intel Factory Heatsink
  • 15.953 - Jian_yi - 3.73GHz, 467 x8 / Gigabyte P965-DS3 / 1GB DDRII-934, 4.0-4-4-9 / Intel Factory Heatsink
  • 16.000 - flatfinger - 3.66GHz, 458 x8 / Biostar TForce 965PT / 2GB DDRII-916, 4.0-5-3-10 / Gigabyte 3D Galaxy WC
  • 16.906 - irenic - 3.50GHz, 438 x8 / Biostar TForce P965 Deluxe / 2GB DDRII-876, 3.0-5-5-15 / Intel Factory Heatsink
  • 17.328 - XTimX - 3.52GHz, 440 x8 / Intel D975XBX / 256MB DDRII-1110, 4.0-4-4-8 / Gigabyte G-Power Pro
  • 18.187 - CyberTroop - 3.76GHz, 470 x8 / Gigabyte P965-DS3 / 2GB DDRII-940, 5.0-5-5-12 / Thermaltake Big Typhoon VX
  • 18.984 - stevenlee - 3.20GHz, 400 x8 / Abit AB9-Pro / 1GB DDRII-800, 5.0-5-5-15 / Scythe Mine
- E6420
  • 13.953 - kerryking - 3.92GHz, 490 x8 / ASUS Commando / 2GB DDRII-980, 5.0-5-5-15 / Thermaltake Big Typhoon VX
  • 14.187 - KidsCode - 3.80GHz, 475 x8 / Gigabyte P35-DQ6 / 2GB DDRII-950, 4.0-4-4-12 / Scythe Ninja
  • 24.188 - zeustronic - 2.13GHz, 266 x8 / DFI Infinity 975X/G / 2GB DDRII-800, 5.0-5-5-18 / Intel Factory Heatsink
- E6550
  • 15.016 - gtghost - 3.48GHz, 498 x7 / Gigabyte P35-DS3 / 2GB DDRII-996, 4.0-4-4-10 / Zalman CNPS9700
  • 18.141 - KahLooN - 2.80GHz, 400 x7 / ASUS P5K-SE / 2GB DDRII-800, 5.0-4-4-8 / Xigmatek HDT-S1283

- E6600
  • 10.984 - coolice - 4.72GHz, 525 x9 / DFI Infinity P965-S / 1GB DDRII-1050, 4.0-4-4-9 / Dry Ice
  • 11.656 - extremeocer - 4.33GHz, 542 x8 / Gigabyte P35-DQ6 / 2GB DDRII-1084, 4.0-4-3-8 / Cascade
  • 12.531 - Henry - 4.02GHz, 447 x9 / DFI Infinity P965-S / 2GB DDRII-894, 5.0-4-4-12 / Zalman CNPS-9500Cu
  • 12.641 - irangan - 4.07GHz, 452 x9 / DFI Infinity P965-S / 2GB DDRII-904, 4.0-4-4-12 / D-Tek Fuzion CPU Block
  • 12.890 - rlhc17 - 3.95GHz, 494 x8 / Abit AB9 Quad GT / 2GB DDRII-988, 4.0-4-4-12 / Gigabyte 3D Galaxy WC
  • 12.953 - sniper on the roof - 4.00GHz, 445 x9 / ASUS P5B Deluxe / 2GB DDRII-890, 5-5-5-12 / Thermalright Ultra-120
  • 12.953 - tAmp0i - 3.95GHz, 439 x9 / ASUS P5N32-E SLI / 2GB DDRII-878, 4.0-3-3-4 / Scythe Ninja
  • 13.266 - teohwk - 3.93GHz, 436 x9 / ASUS P5W DH Deluxe / 2GB DDRII-873, 5.0-5-5-15 / Zalman CNPS9500 LED
  • 13.312 - HaHaNoCluE - 3.87GHz, 430 x9 / Abit AW9D-Max / 1GB DDRII-860, 4.0-4-4-12 / ???
  • 13.422 - yehlai - 3.81GHz, 423 x9 / Biostar TForce 965 PT / 2GB DDRII-846, 4.0-4-4-10 / Thermaltake Big Typhoon
  • 13.453 - Joseph Hahn - 3.81GHz, 423 x9 / DFI Infinity P965-S / 2GB DDRII-1058, 5.0-4-4-5 / Thermalright Ultra-120 Extreme
  • 13.469 - VT-Ten - 3.84GHz, 427 x9 / ASUS P5N32-E SLI / 2GB DDRII-854, 4.0-4-4-12 / Thermaltake Big Typhoon VX
  • 13.516 - warrior - 3.85GHz, 427 x9 / MSI P6N SLI Platinum / 1GB DDRII-800, 4.0-7-4-12 / Thermaltake Big Water 745
  • 13.562 - toughnut - 3.83GHz, 426 x9 / Gigabyte P35-DS3P / 2GB DDRII-852, 4.0-4-4-4 / Xigmatek HDT-S1283
  • 13.578 - mfcm - 3.96GHz, 440 x9 / ASUS Commando / 2GB DDRII-880, 4.0-4-4-12 / Tuniq Tower 120
  • 13.641 - emubleeeem - 3.80GHz, 423 x9 / Gigabyte P965-DQ6 / 2GB DDRII-846, 5.0-5-5-12 / Zalman CNPS 9700 NT
  • 13.672 - AceCombat - 3.79GHz, 421 x9 / DFI Infinity P965-S / 2GB DDRII-842, 4.0-4-3-8 / Thermaltake Big Typhoon VX
  • 13.719 - gengstapo - 3.74GHz, 416 x9 / ASUS Commando / 2GB DDRII-832, 5.0-4-4-12 / Thermaltake Big Typhoon VX
  • 13.822 - remysix - 3.81GHz, 424 x9 / Gigabyte P35-DQ6 / 2GB DDRII-848, 4.0-4-4-10 / Cooler Master GeminII
  • 13.844 - jarofclay - 3.77GHz, 419 x9 / ASUS StrikerExtreme / 2GB DDRII-942, 4.0-4-4-12 / Intel Factory Heatsink
  • 13.937 - zeustronic - 3.73GHz, 415 x9 / Intel D975XBX2 / 1GB DDRII-1038, 5.0-5-5-15 / Cooler Master Hyper 48
  • 13.984 - mjoe - 3.64GHz, 405 x9 / Gigabyte P965-DS3 / 1GB DDRII-810, 4.0-4-4-10 / Cooler Master Hyper L3
  • 13.985 - irenic - 3.81GHz, 423 x9 / Intel D975XBX2 / 2GB DDRII-846, 5.0-5-5-15 / AquaXtreme MP-05 WC
  • 14.156 - nakata101 - 3.62GHz, 403 x9 / Biostar TForce 965 PT / 1GB DDRII-806, 5.0-5-5-15 / Dragon Head Copper CPU Cooler (F1)
  • 14.172 - Austin - 3.70GHz, 412 x9 / Gigabyte P965-DS3 / 1GB DDRII-824, 4.0-4-4-12 / Thermaltake Big Typhoon VX
  • 14.375 - intune - 3.78GHz, 420 x9 / Biostar TForce 965 PT / 1GB DDRII-840, 5.0-4-4-10 / Cooler Master Hyper TX
  • 14.453 - sensesfail - 3.60GHz, 400 x9 / ASUS StrikerExtreme / 1GB DDRII-944, 5.0-5-5-20 / Gigabyte 3D Galaxy WC
  • 14.765 - Sanko - 3.50GHz, 500 x7 / ASUS P5B-E Plus / 2GB DDRII-1000, 5.0-5-5-15 / Intel Factory Heatsink
  • 14.829 - tone - 3.42GHz, 380 x9 / Gigabyte P965-DS3 / 1GB DDRII-950, 4.0-4-4-10 / Custom WC
  • 14.921 - kaiser_falco - 3.60GHz, 400 x9 / Gigabyte P965-DS3 / 1GB DDRII-800, 5.0-5-5-15 / Gigabyte G-Power Pro
  • 15.000 - ksl279 - 3.40GHz, 378 x9 / ASUS P5W DH Deluxe / 2GB DDRII-756, 4.0-4-4-8 / Gigabyte 3D Galaxy WC
  • 15.531 - BeastX - 3.33GHz, 370 x9 / Gigabyte P965-DS4 / 2GB DDRII-986, 5.0-6-6-20 / Intel Factory Heatsink
  • 15.828 - frostmourne - 3.24GHz, 360 x9 / Gigabyte P965-DQ6 / 2GB DDRII-720, 4.0-4-4-12 / Intel Factory Heatsink
  • 15.906 - toch3 - 3.24GHz, 360 x9 / Gigabyte P965-DS3 / 1GB DDRII-720, ?-?-?-? / Intel Factory Heatsink
  • 15.938 - pearldiver - 3.21GHz, 357 x9 / Gigabyte P965-DS4 / 1GB DDRII-714, 5.0-5-5-14 / Intel Factory Heatsink
  • 16.000 - sHawTY - 3.20GHz, 400 x8 / ??? / 1GB DDRII-1000, 4.0-4-4-10 / Intel Factory Heatsink
  • 16.422 - masamura - 3.24GHz, 360 x9 / Gigabyte P965-DS3 / 1GB DDRII-720, ?-?-?-? / Intel Factory Heatsink
  • 16.516 - onimusha_m16 - 3.15GHz, 350 x9 / Gigabyte P965-DS3 / 1GB DDRII-700, 4.0-4-4-12 / Coolermaster Hyper TX
  • 16.968 - albirri - 3.06GHz, 340 x9 / Abit AB9 Pro / 1GB DDRII-680, 5.0-5-5-15 / Zalman CPNS9500 LED
  • 21.031 - josephng - 2.40GHz, 266 x9 / Gigabyte P965-DS3 / 2GB DDRII-667, ?-?-?-? / Intel Factory Heatsink
- E6700
  • 12.593 - sup3rfly - 4.03GHz, 448 x9 / DFI Infinity P965-S / 2GB DDRII-896, 4.0-4-4-9 / AquaXtreme MP-05 WC
  • 14.297 - Jian_yi - 3.65GHz, 365 x10 / Gigabyte P965-DS3 / 2GB DDRII-730, 5.0-6-6-18 / Intel Factory Heatsink

- E6750
  • 12.422 - botak - 4.12GHz, 515 x8 / Abit IP35 Pro / 2GB DDRII-1030, 4.0-4-4-9 / ASUS Silent Square Pro
  • 12.469 - Vtec(Rock) - 4.12GHz, 515 x8 / Biostar TForce TP35D2-A7 / 2GB DDRII-1030, 4.0-4-4-9 / Noctua U12F
  • 13.656 - ahsiah - 3.74GHz, 468 x8 / DFI Infinity P965-S / 2GB DDRII-937, 4-4-4-10 / Xigmatek HDT-S1283
  • 13.719 - tone - 3.71GHz, 464 x8 / Gigabyte P965-S3 / 2GB DDRII-928, 5.0-5-5-12 / Custom WC
  • 14.516 - -vip3rleon9- - 3.60GHz, 450 x8 / Gigabyte P35C-DS3R / 2GB DDRII-900, ?-?-?-? / Intel Factory Heatsink
- E6850
  • 11.922 - sup3rfly - 4.22GHz, 469 x9 / Gigabyte P35-DS3P / 2GB DDRII-1172, 4.0-4-4-4 / AquaXtreme MP-05 CPU Block
  • 12.109 - irangan - 4.24GHz, 472 x9 / ASUS P5K Deluxe / 2GB DDRII-1132, 5.0-5-5-18 / D-Tek Fuzion CPU Block
  • 12.187 - rlhc17 - 4.21GHz, 468 x9 / DFI Infinity P965-S / 2GB DDRII-936, 4.0-4-4-12 / Swiftech WC
  • 12.766 - irenic - 4.00GHz, 500 x8 / Gigabyte P35T-DQ6 / 2GB DDRIII-1500, 9.0-9-9-24 / Intel Factory Heatsink
  • 12.920 - remysix - 4.00GHz, 445 x9 / Gigabyte P35-DQ6 / 2GB DDRII-890, 4.0-5-4-12 / Cooler Master GeminII
  • 12.937 - VT-Ten - 4.00GHz, 444 x9 / ASUS P5N32-E SLI / 2GB DDRII-888, 5.0-5-5-18 / Thermaltake Big Typhoon VX
  • 13.297 - kennji - 3.84GHz, 427 x9 / ASUS P5K Premium / 2GB DDRII-1066, 5.0-4-4-9 / Noctua NH-U12F
- X6800
  • 10.828 - irangan - 4.74GHz, 365 x13 / DFI Infinity P965-S / 2GB DDRII-730, 4.0-4-4-9 / Dry Ice
  • 11.359 - kcnyc - 4.51GHz, 376 x12 / ASUS P5W64 WS Pro / 2GB DDRII-752, 3.0-3-3-8 / Prometeia Mach II GT
  • 12.766 - DaRkSyThE - 4.00GHz, 400 x10 / Intel D975XBX2 / 2GB DDRII-800, 3.0-3-3-8 / Scythe Infinity
  • 12.938 - jarofclay - 3.97GHz, 331 x12 / Intel D975XBX / 1GB DDRII-662, 4.0-4-4-12 / Intel Factory Heatsink
Kentsfield
- Q6600
  • 12.453 - rlhc17 - 4.10GHz, 455 x9 / Biostar TForce TP35D2-A7 / 2GB DDRII-910, 4.0-4-4-10 / Swiftech WC
  • 12.781 - leslie0880 - 4.00GHz, 445 x9 / ASUS P5K3 Deluxe Wifi AP / 2GB DDRIII-1424, 8.0-8-8-24 / Thermalright Ultra 120 Extreme
  • 12.984 - zeustronic - 3.96GHz, 440 x9 / ASUS P5K Premium / 2GB DDRII-880, 5.0-5-5-15 / Cooler Master GeminII
  • 13.011 - kiong - 3.96GHz, 440 x9 / ASUS P5K Premium / 2GB DDRII-1056, 4.0-4-4-12 / Xigmatek HDT-S1283
  • 14.141 - intune - 3.80GHz, 422 x9 / Biostar TForce 965PT / 2GB DDRII-844, 6.0-6-6-18 / Xigmatek HDT-S1283
  • 14.337 - remysix - 3.60GHz, 400 x9 / Gigabyte P35-DQ6 / 2GB DDRII-1000, 4.0-4-4-5 / Cooler Master GeminII
  • 15.907 - leslie0880 - 3.33GHz, 371 x9 / ASUS Striker Extreme / 2GB DDRII-912, 4.0-4-4-8 / Arctic Cooling Freezer 7 Pro
  • 16.000 - toughnut - 3.20GHz, 400 x8 / ASUS P5K Deluxe / 2GB DDRII-800, 4.0-4-4-4 / Intel Factory Heatsink
- QX6700
  • 12.953 - irenic - 3.91GHz, 356 x11 / Gigabyte P35T-DQ6 / 2GB DDRIII-1424, 9.0-9-9-24 / Cooler Master GeminII
  • 13.094 - rlhc17 - 3.92GHz, 392 x10 / DFI Infinity P965-S / 2GB DDRII-784, 3.0-3-3-9 / Swiftech WC
  • 16.000 - kevyeoh - 3.20GHz, 400 x8 / Gigabyte P965-DS3 / 2GB DDRII-800, 4.0-4-4-12 / Zalman CNPS9500
  • 16.266 - AceCombat - 3.20GHz, 400 x8 / DFI Infinity P965-S / 2GB DDRII-800, 4.0-4-4-12 / Thermaltake Big Typhoon VX


This post has been edited by tAmp0i: Nov 22 2007, 12:38 PM
VT-Ten
post Jul 23 2007, 10:59 AM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



will this thread be pinned, jsut like the previous one?
TStAmp0i
post Jul 23 2007, 11:02 AM

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



QUOTE(VT-Ten @ Jul 23 2007, 10:59 AM)
will this thread be pinned, jsut like the previous one?
*
Yes definitely smile.gif
irangan
post Jul 23 2007, 11:45 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


Nice.... Let's journey continue!
toughnut
post Jul 24 2007, 11:16 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
wow, revision3 already? then it's good sign for new breed of fsb1333 to be listed here. any user of e6x50 want to share the OC stats?
irangan
post Jul 24 2007, 05:24 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


3.81ghz 1.45vcore prime stable

E6850
ahsiah
post Jul 24 2007, 08:18 PM

Asus ROG Fan
*****
Senior Member
875 posts

Joined: Oct 2004
From: Selayang, Selangor


3.64ghz 1.45Vcore prime stable

E6750
VT-Ten
post Jul 24 2007, 10:12 PM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



whats wrong with my proc? even orthos blend stress with priority 9 at stock clock 1.35vcore is giving error. rclxub.gif rclxub.gif
Hyde`fK
post Jul 24 2007, 10:15 PM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



Have you tried both Small and Large test? Give us the result. If only small test having errors, possibly the proc is faulty at first who knows.
BlackThyra87
post Jul 24 2007, 10:24 PM

Can't be Mad.
******
Senior Member
1,643 posts

Joined: Jan 2003
From: Pulau Indah



its ver.3... nice... biggrin.gif

i see that Arctic cooling MX-2 TIM is out. Has anyone got his/her hands on it yet?

the MX-2 is better than MX-1 and AS5 so u will get 2+ degrees cooler temps on ur overclocked CPUs.

wonder where i could grab it... rolleyes.gif
kmarc
post Jul 25 2007, 12:12 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



Just finished setting up my new rig. Remember when we were wondering whether the E6x50 series were giving wrong core temperature?

Well, I didn't have time to test it fully yet but it looks like some apps are giving inaccurate temp.

On my E6750 + stock heatsink + GA-P35-DS3:
Core temp (v0.94) at load (orthos) : 43'c
Easytune5 at load (orthos) : 49'c

The Easytune5 app came with the mobo. It is consistently registering 6'c higher than core temp.

I remember irenic's E6850 giving a load temp of 51'c at 4.0Ghz (stock heatsink) which I thought a bit too low.

Anybody can confirm this? What CPU temp monitoring apps are you all using for the E6x50 series? Wanna get the core temperature correct first before I start to overclock this baby..... laugh.gif

Going to test with other apps (e.g. speedfan) tomorrow after work......

This post has been edited by kmarc: Jul 25 2007, 12:13 AM
VT-Ten
post Jul 25 2007, 12:22 AM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



ive used asus probe, speedfan, coretemp, rivatuner (CPU plugin), and everest. all registered the same temp.

idle stock everythin; cpu 35C core0 25C core1 19C
TStAmp0i
post Jul 25 2007, 12:30 AM

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



QUOTE(VT-Ten @ Jul 24 2007, 10:12 PM)
whats wrong with my proc? even orthos blend stress with priority 9 at stock clock 1.35vcore is giving error.  rclxub.gif  rclxub.gif
*
Can you manually set the sub-timings in BIOS? 4.0-4-4-12-2T-4-25-6-8-Auto-Auto-40-Auto

QUOTE(kmarc @ Jul 25 2007, 12:12 AM)
Just finished setting up my new rig. Remember when we were wondering whether the E6x50 series were giving wrong core temperature?

Well, I didn't have time to test it fully yet but it looks like some apps are giving inaccurate temp.

On my E6750 + stock heatsink + GA-P35-DS3:
Core temp (v0.94) at load (orthos) : 43'c
Easytune5 at load (orthos) : 49'c

The Easytune5 app came with the mobo. It is consistently registering 6'c higher than core temp.

I remember irenic's E6850 giving a load temp of 51'c at 4.0Ghz (stock heatsink) which I thought a bit too low.

Anybody can confirm this? What CPU temp monitoring apps are you all using for the E6x50 series? Wanna get the core temperature correct first before I start to overclock this baby.....  laugh.gif

Going to test with other apps (e.g. speedfan) tomorrow after work......
*
E6850 testing 3.80GHz 1.49v Orthos, Scythe Ninja. Asus Probe 63°C and CoreTemp (0.95) 54°C.... Accurate i believe smile.gif
irangan
post Jul 25 2007, 12:59 AM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(VT-Ten @ Jul 24 2007, 10:12 PM)
whats wrong with my proc? even orthos blend stress with priority 9 at stock clock 1.35vcore is giving error.  rclxub.gif  rclxub.gif
*
If you fail prime at stock speed, its means that there is nothing wrong with proc. Start looking elsewhere.. Like...

PC6400 @ 4-4-4-12 1T <<<<

QUOTE(kmarc @ Jul 25 2007, 12:12 AM)
Just finished setting up my new rig. Remember when we were wondering whether the E6x50 series were giving wrong core temperature?

Well, I didn't have time to test it fully yet but it looks like some apps are giving inaccurate temp.

On my E6750 + stock heatsink + GA-P35-DS3:
Core temp (v0.94) at load (orthos) : 43'c
Easytune5 at load (orthos) : 49'c

The Easytune5 app came with the mobo. It is consistently registering 6'c higher than core temp.

I remember irenic's E6850 giving a load temp of 51'c at 4.0Ghz (stock heatsink) which I thought a bit too low.

Anybody can confirm this? What CPU temp monitoring apps are you all using for the E6x50 series? Wanna get the core temperature correct first before I start to overclock this baby.....  laugh.gif

Going to test with other apps (e.g. speedfan) tomorrow after work......
*
If u not sure which app is more accurate, always trust the one that record higher temp smile.gif

Anyway, I am quite sure that coretemp got problem detecting the correct temp for E6*50 proc. Anyway, I am using Asus Probe II

irenic
post Jul 25 2007, 02:11 AM

extr3me n3wbie
*******
Senior Member
7,338 posts

Joined: Jan 2003
From: Cybercity of Cyberjaya


i used thermometer and the temperature of my heatsink (near the processor) was below ambient temp.. well i didnt mean coretemp is correct but at least it is proven this G0 runs very2 cool..
rlhc17
post Jul 25 2007, 04:10 AM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



E6850 initial result smile.gif


Attached thumbnail(s)
Attached Image
Sanko
post Jul 25 2007, 04:22 AM

Noob
******
Senior Member
1,436 posts

Joined: Mar 2005


congrat raymond. you are the best. now my rig is still not with me, can't play with it. i hope i can get 4.2GHz also. but after testing for few hours, i only managed to get 4.1GHz. sien.... btw, what is the vcore you use to obtain 4GHz mark? and that's the highest?

This post has been edited by Sanko: Jul 25 2007, 04:23 AM
VT-Ten
post Jul 25 2007, 07:59 AM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



QUOTE(irangan @ Jul 25 2007, 12:59 AM)
If you fail prime at stock speed, its means that there is nothing wrong with proc. Start looking elsewhere.. Like...

PC6400 @ 4-4-4-12 1T <<<<
If u not sure which app is more accurate, always trust the one that record higher temp smile.gif

Anyway, I am quite sure that coretemp got problem detecting the correct temp for E6*50 proc. Anyway, I am using Asus Probe II
*
dun think my ram timings are giving problems... was using the same timings previously with my e6600.
Bliz
post Jul 25 2007, 11:41 AM

Look at all my stars!!
*******
Senior Member
2,734 posts

Joined: Jan 2003
From: Melaka


Wow seems like the 6x50 series really cool eh? My dated e6300@3.1Ghz already load arund 64c using Scythe Ninja sweat.gif
TStAmp0i
post Jul 25 2007, 01:36 PM

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



QUOTE(rlhc17 @ Jul 25 2007, 04:10 AM)
E6850 initial result smile.gif
*
Bro, itchy already kah? Hehehe.... laugh.gif Nice result!
AceCombat
post Jul 25 2007, 02:34 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


My very first oc result of Quad Extreme,it's boiling Eggs....


actually i got 16.003seconds,but forgot to print screen.... cry.gif


tampoi,kindly update the first page,thanks!

This post has been edited by AceCombat: Jul 25 2007, 02:35 PM


Attached thumbnail(s)
Attached Image
remysix
post Jul 25 2007, 03:16 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(rlhc17 @ Jul 25 2007, 04:10 AM)
E6850 initial result smile.gif
*
care to share the FPO/Batch code for that FINE proc...and what vcore was that?
looks delicious...
Hyde`fK
post Jul 25 2007, 03:27 PM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



QUOTE(AceCombat @ Jul 25 2007, 02:34 PM)
My very first oc result of Quad Extreme,it's boiling Eggs....
actually i got 16.003seconds,but forgot to print screen.... cry.gif
tampoi,kindly update the first page,thanks!
*
Give another set of run for better result. brows.gif
HaHaNoCluE
post Jul 25 2007, 03:31 PM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


e6600 super pi 1m 13.312s icon_idea.gif

Attached Image

ooops...

rig:
e6600, 430 x 9, 3.87GHz
kingston ddr2-800 512MB x 2
abit aw9d-max
arctic freezer 7 pro

This post has been edited by HaHaNoCluE: Jul 26 2007, 03:05 AM
AceCombat
post Jul 25 2007, 04:36 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


QUOTE(Hyde`fK @ Jul 25 2007, 03:27 PM)
Give another set of run for better result. brows.gif
*
very soon bro,no time to tweak,right now just run it for fun,back to 3.0GHz daily use.

anyway,more result coming up soon.
kmarc
post Jul 25 2007, 05:05 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(VT-Ten @ Jul 25 2007, 12:22 AM)
ive used asus probe, speedfan, coretemp, rivatuner (CPU plugin), and everest. all registered the same temp.

idle stock everythin; cpu 35C core0 25C core1 19C
*
That's what I mean..... core1 at 19'c??!?? rclxub.gif


QUOTE(tAmp0i @ Jul 25 2007, 12:30 AM)
E6850 testing 3.80GHz 1.49v Orthos, Scythe Ninja. Asus Probe 63°C and CoreTemp (0.95) 54°C.... Accurate i believe smile.gif
*
Errr.... can you clarify that? How can it be accurate when there is a 9'c difference? hmm.gif


QUOTE(irangan @ Jul 25 2007, 12:59 AM)

If u not sure which app is more accurate, always trust the one that record higher temp smile.gif

Anyway, I am quite sure that coretemp got problem detecting the correct temp for E6*50 proc. Anyway, I am using Asus Probe II
*
No necessarily as Rightmark CPU clock showed 6'c higher than easytuner5 which is 6'c higher than core temp!! rclxub.gif

I guess I still have to wait for newer apps that truly support these procs and will show the correct temp...... sad.gif
SlayerXT
post Jul 25 2007, 07:37 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Is anyone here has own E4400 with M0 SLA98 stepping? It looks better oc potential since thermal specification is higher than L2.

This post has been edited by §layerXT: Jul 25 2007, 07:39 PM
irangan
post Jul 25 2007, 09:07 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


@raymond

Nice result.. My proc cant do that. Probably need more testing. Hehe..

Quite obvious that DFI > P5K Deluxe in Mhz but lost out in ram timing. Sigh
TaiZi@CCF
post Jul 26 2007, 12:35 AM

Casual
***
Junior Member
367 posts

Joined: Jan 2003
From: Boleh Land



All sifu, please help me...

http://forum.lowyat.net/topic/493588#
kmarc
post Jul 26 2007, 08:01 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



Those with E6750, mind giving some feedback on your OC?

So far, at stock 1.35v, I'm able to boot at 3280Mhz and also orthos stable.

Going to go for higher vcore later..... (anybody knows the safe voltage for running 24/7?)
cyberfly
post Jul 26 2007, 09:32 AM

Web Dev Zero to Hero
*****
Senior Member
706 posts

Joined: Dec 2006



hi guys...can e6600 overclock using intel chipset 945P mobo?right now using ECS 945P-A ver 3.0 and intel c2d e6600...
jetkiat
post Jul 26 2007, 09:37 AM

Casual
***
Junior Member
367 posts

Joined: Oct 2006
any 1 try this link.......Intel Thermal Analysis Tool
cant dl lah...need help..thanks tongue.gif
SlayerXT
post Jul 26 2007, 10:39 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



QUOTE(cyberfly @ Jul 26 2007, 09:32 AM)
hi guys...can e6600 overclock  using intel chipset 945P mobo?right now using ECS 945P-A ver 3.0 and intel c2d e6600...
*
I dont think ECS board will oc well, just let it be in garage sale and grab P35-DS3 instead. Or still more budget get P31-DS3.
VT-Ten
post Jul 26 2007, 10:47 AM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



QUOTE(cyberfly @ Jul 26 2007, 09:32 AM)
hi guys...can e6600 overclock  using intel chipset 945P mobo?right now using ECS 945P-A ver 3.0 and intel c2d e6600...
*
most 945 based chipset have limited option in OC. Try to hunt down some 2nd hand 965/975, i've seen some are letting it go becoz they wanna get P35.

p/s: i miss my e6600 cry.gif cry.gif
cyberfly
post Jul 26 2007, 02:50 PM

Web Dev Zero to Hero
*****
Senior Member
706 posts

Joined: Dec 2006



QUOTE(VT-Ten @ Jul 26 2007, 10:47 AM)
most 945 based chipset have limited option in OC. Try to hunt down some 2nd hand 965/975, i've seen some are letting it go becoz they wanna get P35.

p/s: i miss my e6600  cry.gif  cry.gif
*
hurm,need to wait till this November if want to buy mobo sad.gif
miss your e6600?then come visit him at Terengganu biggrin.gif
remysix
post Jul 26 2007, 03:08 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(cyberfly @ Jul 26 2007, 02:50 PM)
hurm,need to wait till this November if want to buy mobo sad.gif
miss your e6600?then come visit him at Terengganu  biggrin.gif
*
anything special this November?X38???
VT-Ten
post Jul 26 2007, 11:20 PM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



some of us just dont have such luck in getting processors...
my first e6850 cant even oc to 3.2Ghz using 1.39vcore.

rma the proc and got another proc with the same batch (L720Axxx). no doubt it's slightly better than my first e6850, but still cant fully load to windows at 4.0Ghz 1.60vcore. the weird this is, it doesnt BSOD or POST fail, it just stops loading the OS services. mouse and keyboard are still responding thou....

kmarc
post Jul 26 2007, 11:24 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(VT-Ten @ Jul 26 2007, 11:20 PM)
some of us just dont have such luck in getting processors...
my first e6850 cant even oc to 3.2Ghz using 1.39vcore.

rma the proc and got another proc with the same batch (L720Axxx). no doubt it's slightly better than my first e6850, but still cant fully load to windows at 4.0Ghz 1.60vcore. the weird this is, it doesnt BSOD or POST fail, it just stops loading the OS services. mouse and keyboard are still responding thou....
*
You sure it is the CPU and not the mobo/ram? Intel's CPUs are supposed to be able to OC more than that! 3.0Ghz to 3.2Ghz only is strange.....

My E6750 can go from 2.66 to 3.28Ghz at stock voltages (1.35v). Haven't tried higher vcore yet....
VT-Ten
post Jul 26 2007, 11:41 PM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



QUOTE(kmarc @ Jul 26 2007, 11:24 PM)
You sure it is the CPU and not the mobo/ram? Intel's CPUs are supposed to be able to OC more than that! 3.0Ghz to 3.2Ghz only is strange.....

My E6750 can go from 2.66 to 3.28Ghz at stock voltages (1.35v). Haven't tried higher vcore yet....
*
prolly my oc skills sux... but i set every damn voltage (cpu, sb, nb, vtt, 1.2vht) to 1.6v already. ram left at stock 5-5-5-18 2T 400mhz. tried both 500x8 and 445x9... no luck.

who wants to volunteer to test out my proc? whistling.gif
extremeocer
post Jul 27 2007, 01:01 AM

Casual
***
Junior Member
302 posts

Joined: Jun 2007
From: Johor



QUOTE(VT-Ten @ Jul 26 2007, 11:41 PM)
prolly my oc skills sux... but i set every damn voltage (cpu, sb, nb, vtt, 1.2vht) to 1.6v already. ram left at stock 5-5-5-18 2T 400mhz. tried both 500x8 and 445x9... no luck.

who wants to volunteer to test out my proc?  whistling.gif
*
test ur Proc? wow...i am in for sure tongue.gif . I could prolly get it to 4.5ghz with extreme cooling.
kmarc
post Jul 27 2007, 07:20 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(VT-Ten @ Jul 26 2007, 11:41 PM)
prolly my oc skills sux... but i set every damn voltage (cpu, sb, nb, vtt, 1.2vht) to 1.6v already. ram left at stock 5-5-5-18 2T 400mhz. tried both 500x8 and 445x9... no luck.

who wants to volunteer to test out my proc?  whistling.gif
*
What rams are you using? What's the vdimm? Try to set the rams to DDR2-667 speed.

I don't think you have to do anything to the voltages yet. Most of the time, you can OC the CPU without touching any voltages. It is only if you want to go higher, then you start to increase the voltages.

It is probably not your CPU, considering that you set the vcore to 1.6v. That's high!!!! rclxub.gif

Me! Me! I can test your proc for you! nod.gif But I'm in Kuching la...... difficult.... Or you want to exchange proc? whistling.gif
VT-Ten
post Jul 27 2007, 08:05 AM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



QUOTE(kmarc @ Jul 27 2007, 07:20 AM)
What rams are you using? What's the vdimm? Try to set the rams to DDR2-667 speed.

I don't think you have to do anything to the voltages yet. Most of the time, you can OC the CPU without touching any voltages. It is only if you want to go higher, then you start to increase the voltages.

It is probably not your CPU, considering that you set the vcore to 1.6v. That's high!!!!  rclxub.gif

Me! Me! I can test your proc for you!  nod.gif But I'm in Kuching la...... difficult.... Or you want to exchange proc?  whistling.gif
*
im using crucial ballistix pc6400 400mhz (800 effective) @ 2.225vdimm. 1.6vcore is just one-off testing for 4Ghz setup.

prolly you are right. 2 units of e6850 failed to OC under my rig did make it clear that sumthin is not right with my rig. but what would it be? i hv no problem oc my prev proc using the same system.

Kuching? sorry dude, me passport expired dy... blush.gif
kmarc
post Jul 27 2007, 11:22 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(VT-Ten @ Jul 27 2007, 08:05 AM)
im using crucial ballistix pc6400 400mhz (800 effective) @ 2.225vdimm. 1.6vcore is just one-off testing for 4Ghz setup.

prolly you are right. 2 units of e6850 failed to OC under my rig did make it clear that sumthin is not right with my rig. but what would it be? i hv no problem oc my prev proc using the same system.

Kuching? sorry dude, me passport expired dy...  blush.gif
*
Yeah, same ram as mine. Wah, already set to 2.225v ka? For my rams, at 5-5-5-15, 2T at 2.0v, can already go up to 1150Mhz. So I don't think you need to set the ram vdimm so high at 800Mhz. I was actually running my rams at 4-4-4-12, 2T at 800Mhz at 1.8v. Now still finding out the limits for these nice rams.....

If you have been Ocing your previously proc, then I guess you know how to overclock......Anyway, not too sure why you can't OC your CPU. I'm also still new to C2D and still learning the proper way of overclocking C2D.
toughnut
post Jul 27 2007, 12:00 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
i'm using tracer 800 too, running ddr900 at 4-4-4-8 with 1.9v. not orthos stable but running 24/7 without problem, period tongue.gif

@kmarc,
i'm in UNIMAS, samarahan. if can test, remember me ya hehe
btw, is your proc orthos stable after OC? 3.2Ghz seem bit too low le. aim for 4Ghz and higher la thumbup.gif
kmarc
post Jul 27 2007, 05:02 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(toughnut @ Jul 27 2007, 12:00 PM)
i'm using tracer 800 too, running ddr900 at 4-4-4-8 with 1.9v. not orthos stable but running 24/7 without problem, period tongue.gif

@kmarc,
i'm in UNIMAS, samarahan. if can test, remember me ya hehe
btw, is your proc orthos stable after OC? 3.2Ghz seem bit too low le. aim for 4Ghz and higher la thumbup.gif
*
Ya, I didn't have time to OC further as I'm in Sibu now. Only had 1 day to play with my new rig. Can't wait to get back to kuching!!!

3.2Ghz is only at stock vcore. I have yet to increase the vcore.

Not much time to play with the rams too. Will test further when I get back. For me, I prefer every component to be stable, at least orthos and superPI stable.

Why not increase your Vdimm to 2.0v? I mean, these rams are rated at 2.2v max and warranty covers until that high anyway. I'm probably going to find a sweet spot for 2.0-2.1v vdimm.....

rlhc17
post Jul 28 2007, 04:56 AM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



Testing QX6700 ES biggrin.gif


Attached thumbnail(s)
Attached Image
Hyde`fK
post Jul 28 2007, 11:31 AM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



Wah Raymond, this is your new toy kah? New clocks ler. What vcore on 4Ghz? Temp ler?
HaHaNoCluE
post Jul 28 2007, 11:55 AM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


uhh... raymond what's the temp??? u use ur new swiftech wc?? wat's voltage for core, mch, ...???
AceCombat
post Jul 28 2007, 01:14 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


ya bro,i wanna know ur temp and vcore too.thanks ya!

ppl got quad core to play....i still stick with my barton cry.gif
kmarc
post Jul 28 2007, 03:04 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(AceCombat @ Jul 28 2007, 01:14 PM)
ya bro,i wanna know ur temp and vcore too.thanks ya!

ppl got quad core to play....i still stick with my barton cry.gif
*
What are you talking about? You also have quad core ma.... some more just let your brother use the quad oni.....
yehlai
post Jul 28 2007, 04:19 PM

tree lover
*******
Senior Member
4,539 posts

Joined: Feb 2006
From: LocOmoT|oN.L0co|oti0N


whao.. ver.3 alrdy rclxms.gif nice..
Can't 'play' with o'c anymore cry.gif since started working life. Miss u guys so much. U guys are great, now we even have TEAM K.O.C thumbup.gif Thanks sifu here for sharing experience in o'c notworthy.gif respec u all !!

This post has been edited by yehlai: Jul 28 2007, 04:44 PM
rlhc17
post Jul 28 2007, 09:22 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



QUOTE(Hyde`fK @ Jul 28 2007, 11:31 AM)
Wah Raymond, this is your new toy kah? New clocks ler. What vcore on 4Ghz? Temp ler?
*
QUOTE(HaHaNoCluE @ Jul 28 2007, 11:55 AM)
uhh... raymond what's the temp??? u use ur new swiftech wc?? wat's voltage for core, mch, ...???
*
1.6vcore temp scary la...........more than 85c full load sad.gif
remysix
post Jul 28 2007, 11:17 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(rlhc17 @ Jul 28 2007, 09:22 PM)
1.6vcore temp scary la...........more than 85c full load sad.gif
*
but for quad, the Tjunction is 100c rite...but dunno la if ES. benchie ok la but ofcourse not on 24/7
rlhc17
post Jul 29 2007, 11:38 AM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



Testing discontinued C2D E6400 ES smile.gif


Attached thumbnail(s)
Attached Image
kmarc
post Jul 29 2007, 12:37 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(rlhc17 @ Jul 29 2007, 11:38 AM)
Testing discontinued C2D E6400 ES smile.gif
Nice. However, I really wished forumers would also include important info such as vcore, vdimm, vMCH, vFSB, core temperature and type of cooling. nod.gif

This post has been edited by kmarc: Jul 29 2007, 12:37 PM
SlayerXT
post Jul 30 2007, 12:19 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



The Dark Series very kow lor, I wonder if DFI will make them support for penryn.
rlhc17
post Jul 30 2007, 02:11 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



Initial test Pentium Dual Core E2140 biggrin.gif


Attached thumbnail(s)
Attached Image
kmarc
post Jul 30 2007, 02:41 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



Here's mine doing stress test at stock 1.35v. Notice the supposedly CPU temp at 55'c on stock heatsink!!! sweat.gif

Don't dare increase the vcore until I get my new heatsink.

Quite a bad vdroop though, about 0.03v drop at full load (is this acceptable???)

See my stock NB temp at 41'c only.... biggrin.gif

This post has been edited by kmarc: Jul 30 2007, 02:42 PM


Attached thumbnail(s)
Attached Image
VT-Ten
post Jul 30 2007, 10:11 PM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



finally managed to break the 4Ghz barrier. Superpi 1M managed sub 13 secs

suicidal settings.
vcore 1.6
nb 1.6
1.2VHT 1.6
sb 1.6
CPU VTT 1.55 (already max)



This post has been edited by VT-Ten: Jul 30 2007, 10:16 PM


Attached thumbnail(s)
Attached Image
AceCombat
post Jul 30 2007, 10:21 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


QUOTE(rlhc17 @ Jul 28 2007, 09:22 PM)
1.6vcore temp scary la...........more than 85c full load sad.gif
*
bro,using swiftech wc and go 85c on full load ah?
kmarc
post Jul 30 2007, 10:44 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(VT-Ten @ Jul 30 2007, 10:11 PM)
finally managed to break the 4Ghz barrier. Superpi 1M managed sub 13 secs

suicidal settings.
vcore 1.6
nb 1.6
1.2VHT 1.6
sb 1.6
CPU VTT 1.55 (already max)
Wah! So high settings! You could probably get better superPI if you tighten your ram timings.

See my modest OC on stock heatsink. Can't OC much until I get my xigmatek cooler.

My rams are also Crucial ballistix PC6400 running at 4-4-4-8, 2T, 2.1v at 960Mhz......


Attached thumbnail(s)
Attached Image
SlayerXT
post Jul 30 2007, 10:54 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



QUOTE(VT-Ten @ Jul 30 2007, 10:11 PM)
finally managed to break the 4Ghz barrier. Superpi 1M managed sub 13 secs

suicidal settings.
vcore 1.6
nb 1.6
1.2VHT 1.6
sb 1.6
CPU VTT 1.55 (already max)
*
E6850 also need high setting like that hmm.gif, using WC and proper cooling, ventilation maybe can use 4GHz everyday.
irangan
post Aug 2 2007, 12:08 AM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


Some result I obtained from quick benching on my Asus P5K Deluxe as requested by some buyer.

4ghz (1.46vcore) Prime Stable (Blend Test, Priority 9) for 12hours
Attached Image

Untweaked and run at 'dirty' window Pi Result at 4248.
Attached Image

Suicide run
Attached Image


SlayerXT
post Aug 2 2007, 11:43 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



What shocking.gif under 1.5v can stably for 4GHz?
kucingfight
post Aug 2 2007, 11:45 AM

Look at all my stars!!
Group Icon
Elite
5,784 posts

Joined: Jan 2003
From: Shah Alam



QUOTE(§layerXT @ Aug 2 2007, 11:43 AM)
What shocking.gif under 1.5v can stably for 4GHz?
*
YEap no suprise, G0 is capable of it. furthermore he's on water, probably able to hit that with a super duper HSF too.
irangan
post Aug 2 2007, 04:45 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(kucingfight @ Aug 2 2007, 11:45 AM)
YEap no suprise, G0 is capable of it. furthermore he's on water, probably able to hit that with a super duper HSF too.
*
Errr... You are only half correct about the proc and cooling. Though, cooling is very important but a good mobo is needed also to achieve that. So far I cant reach that speed and stablity with any of my mobo I tested before.
Hyde`fK
post Aug 3 2007, 01:32 AM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



A good comprehensive details on 680i SLI and P35.

http://www.hardspell.com/english/doc/showc...sp?news_id=1136
kucingfight
post Aug 3 2007, 08:33 AM

Look at all my stars!!
Group Icon
Elite
5,784 posts

Joined: Jan 2003
From: Shah Alam



Anyways here's the sweet spot of my P2D. The 3.1ghz is Orthos Stable, but need an additional + 0.08v. pls add me to the list.

user posted image

This post has been edited by kucingfight: Aug 3 2007, 08:39 AM
SlayerXT
post Aug 3 2007, 08:31 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



I think maybe the ASUS board u tested had newer revision. I am hoping at least to get sub 4GHz with my QuadGT...(maybe impossible)....
irangan
post Aug 3 2007, 09:45 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


I not sure what revision is my board but its should be the latest gua
intune
post Aug 4 2007, 12:35 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



Bro Tampoi add my to the list..


[attachmentid=272103]

Mobo: Biostar 965PT
Rams: 1GB Kingston Hynix C4 (5-4-4-10) (for Testing Only)
Cooling: CM HyperTX
PSU: Silverstone ST56F


Sanko
post Aug 4 2007, 01:51 PM

Noob
******
Senior Member
1,436 posts

Joined: Mar 2005


For Abit IP35-Pro kakis, new bios is out.

IP35 Pro BIOS Released 8/3/07 (v11)

http://file.abit.com.tw/pub/download/bios/...pro/m629b11.zip

Release information:
1. Support CL=3.
2. Enhanced compatibility with certain memories.
3. Support Command Rate adjusting function.
4. Update Jmicron BIOS to V1.06.69.
5. BIOS compiled date: 07/13/2007

courtesy of HamidFULL (XS)
harmeet15
post Aug 4 2007, 07:17 PM

Winners don't make excuses
*******
Senior Member
2,729 posts

Joined: Oct 2005
From: Gotham City



kinda a noob question here...
does any1 do over clocking as a profession, ie can i pay for doin tat?
SlayerXT
post Aug 4 2007, 07:41 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



I think its just as a hobby, they also have another job to do.
rainingzero
post Aug 6 2007, 01:21 PM

I miss my student life~
*******
Senior Member
2,497 posts

Joined: Jan 2006
From: Selangor


QUOTE(harmeet15 @ Aug 4 2007, 07:17 PM)
kinda a noob question here...
does any1 do over clocking as a profession, ie can i pay for doin tat?
*
try ask uglyvamp, he already done many ocing for his customer...but usually, with watercooling setup... smile.gif
irangan
post Aug 6 2007, 02:43 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


uglyvamp based in Singapore le.. Anyway, it is quite easy to setup an OC rig or how to OC just by reading through those guide and so on.
toughnut
post Aug 7 2007, 10:01 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
OC as a profession? must be starving for voltage and TIM everyday lol

anyone using DFi P35 board already? interested to see the real OC result. 8phase digital PWM in action
remysix
post Aug 7 2007, 10:56 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(toughnut @ Aug 7 2007, 10:01 AM)
OC as a profession? must be starving for voltage and TIM everyday lol

anyone using DFi P35 board already? interested to see the real OC result. 8phase digital PWM in action
*
does this board picky like the Dark? really sux if it does, well at least for some...
irangan
post Aug 7 2007, 03:58 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(toughnut @ Aug 7 2007, 10:01 AM)
OC as a profession? must be starving for voltage and TIM everyday lol

anyone using DFi P35 board already? interested to see the real OC result. 8phase digital PWM in action
*
Those digital PWM is seriously over rated. When you going for extreme oc and high vcore, you will prefer analog as it is more stable.

QUOTE(remysix @ Aug 7 2007, 10:56 AM)
does this board picky like the Dark? really sux if it does, well at least for some...
*
From what I read, seems that DFI have solved those picky problem but we'll never know for sure unless its had been tested by any normal user


Added on August 7, 2007, 4:00 pm double post

This post has been edited by irangan: Aug 7 2007, 04:01 PM
remysix
post Aug 7 2007, 04:36 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(irangan @ Aug 7 2007, 03:58 PM)
Those digital PWM is seriously over rated. When you going for extreme oc and high vcore, you will prefer analog as it is more stable.
From what I read, seems that DFI have solved those picky problem but we'll never know for sure unless its had been tested by any normal user


Added on August 7, 2007, 4:00 pm double post
*
and unfortunately, the test needs to cover so many hardware/equipments. this is really a turn-off point for DFi mobo...
rainingzero
post Aug 7 2007, 05:54 PM

I miss my student life~
*******
Senior Member
2,497 posts

Joined: Jan 2006
From: Selangor


currently using P4 631 cedar mill oc 3.4ghz for everyday usage. seems it's enough for me to play games with it's 2mb cache.don't want to push more coz using stock cooler (got xp90 + LGA775 RM thinking of swap after suing C2d) does it show any significant performance increase if i change to c2d??currently bargain for cheap c2d e4300 and then will tend to oc it....
remysix
post Aug 7 2007, 09:33 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


a quick test on my E6850...
beam me up tAmp0i tongue.gif

Attached Image

extra information:
4.00GHz, 445 x9 / Gigabyte GA-P35-DQ6 / 2GB DDRII-890, 4.0-5-4-12 / CM Gemini II

This post has been edited by remysix: Aug 7 2007, 11:19 PM
SlayerXT
post Aug 8 2007, 10:16 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



What's ur vcore, vdimm and vmch?
toughnut
post Aug 8 2007, 02:54 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
all seem going for 4Ghz... seem like i will change my proc too sad.gif
remysix
post Aug 8 2007, 05:33 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(§layerXT @ Aug 8 2007, 10:16 AM)
What's ur vcore, vdimm and vmch?
*
vcore=1.6v drooped to 1.57v I think
vdimm = 2.25v
vmch = +0.30v

not stable thou under my air cooling and 'oven-like' room tongue.gif
kmarc
post Aug 8 2007, 05:40 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(remysix @ Aug 8 2007, 05:33 PM)
vcore=1.6v drooped to 1.57v I think
vdimm = 2.25v
vmch = +0.30v

not stable thou under my air cooling and 'oven-like' room tongue.gif
*
I don't think you need to increase your vMCH at all. My P35-DS3 can go up to a bus speed of 480mhz without any increase in vMCH or vFSB.... Can't go any higher probably due to my CPU FSB wall..... sad.gif
remysix
post Aug 8 2007, 05:58 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(kmarc @ Aug 8 2007, 05:40 PM)
I don't think you need to increase your vMCH at all. My P35-DS3 can go up to a bus speed of 480mhz without any increase in vMCH or vFSB.... Can't go any higher probably due to my CPU FSB wall.....  sad.gif
*
yup...that's correct.
just to make sure that i can boot it up at that speed...actually mine can go upto 500 without touching the vmch biggrin.gif
kennji
post Aug 10 2007, 01:53 AM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
QUOTE(kmarc @ Aug 8 2007, 05:40 PM)
I don't think you need to increase your vMCH at all. My P35-DS3 can go up to a bus speed of 480mhz without any increase in vMCH or vFSB.... Can't go any higher probably due to my CPU FSB wall.....  sad.gif
*
does that only apply to giga's board? mine would definately need some increment to aid stability...

my results: 427 x 9 @ 3843 MHz. vcore=1.465v bios, vdimm=2.10v. should be able to fine tune it a little bit more and use as 24/7, hopefully...

suicidal run: 463 x 9 @ 4167 MHz. vcore=1.625v bios, vdimm=2.30v...wouldn't dare to go any higher...and of course not prime/orthos stable, just in case you ask... whistling.gif


Attached thumbnail(s)
Attached Image Attached Image
gengstapo
post Aug 10 2007, 09:02 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
ehh guys, wondering wheter the p965 boards can suit(hoping at least) with core 2 quad in overclocking? anyone else outthere using this paired??
baok
post Aug 10 2007, 10:43 AM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005


QUOTE(kmarc @ Aug 8 2007, 05:40 PM)
I don't think you need to increase your vMCH at all. My P35-DS3 can go up to a bus speed of 480mhz without any increase in vMCH or vFSB.... Can't go any higher probably due to my CPU FSB wall.....  sad.gif
*
is your mobo is DS3 or DS3R/P???
toughnut
post Aug 10 2007, 10:46 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
i didn't touch my vFSB, vMCH too when OC. doesn't seem to make any different. the board i'm on now is P35-DS3P
remysix
post Aug 10 2007, 11:43 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


well...from my observation (at least for my mobo) i need to increase the gmch to ensure voltage stability during load...if not the voltage will drop a bit (roughly +0.02v) during load compared to idle...
SlayerXT
post Aug 10 2007, 01:00 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Yaea, anyone? future getting G0 Q6600. When I was reading review on 965P quad core oc in early days, its hardly to see they oc above 400FSB.. sad.gif
gengstapo
post Aug 10 2007, 02:36 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(§layerXT @ Aug 10 2007, 01:00 PM)
Yaea, anyone? future getting G0 Q6600. When I was reading review on 965P quad core oc in early days, its hardly to see they oc above 400FSB.. sad.gif
*
yupp, just got info, rlhc17 sez his previous dfi p965 only can handle up to 415Mhz only..

i think same to me as well.. wtf!! vmad.gif
remysix
post Aug 10 2007, 02:38 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Aug 10 2007, 02:36 PM)
yupp, just got info, rlhc17 sez his previous dfi p965 only can handle up to 415Mhz only..

i think same to me as well.. wtf!!  vmad.gif
*
migrate!migrate!migrate! migrate to P35 la bro tongue.gif
gengstapo
post Aug 10 2007, 02:41 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(remysix @ Aug 10 2007, 02:38 PM)
migrate!migrate!migrate! migrate to P35 la bro tongue.gif
*
w0ot.. poison detected, run for ya live!!

aiyaakk, this hobby make me sick lehh, more & more $$$ to be spent laugh.gif sweat.gif

let me try 1st with my current p965
AceCombat
post Aug 10 2007, 09:02 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


guys...u all using E6850 until so syok,so easy to oc,what's the vcore that needed in order to go beyond 4ghz?

and u guys think P5K Deluxe is a good mobo compared to P35 DQ6?
kmarc
post Aug 10 2007, 09:16 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(gengstapo @ Aug 10 2007, 02:36 PM)
yupp, just got info, rlhc17 sez his previous dfi p965 only can handle up to 415Mhz only..

i think same to me as well.. wtf!!  vmad.gif
*
QUOTE(gengstapo @ Aug 10 2007, 02:41 PM)
w0ot.. poison detected, run for ya live!!

aiyaakk, this hobby make me sick lehh, more & more $$$ to be spent  laugh.gif  sweat.gif

let me try 1st with my current p965
*
Ya lo, if want higher OC on the bus speed, should migrate to P35. My Gigabyte P35-DS3 (value for money performance mobo) can OC to a bus speed of 480mhz without any voltages adjustment (either vMCH or vFSB)!!!! smile.gif

QUOTE(AceCombat @ Aug 10 2007, 09:02 PM)
guys...u all using E6850 until so syok,so easy to oc,what's the vcore that needed in order to go beyond 4ghz?

and u guys think P5K Deluxe is a good mobo compared to P35 DQ6?
*
Ooppsss, me using E6750 and P35-DS3 oni la.... so sorry, cannot give any advice..... wink.gif
mmohdnor
post Aug 11 2007, 08:13 AM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star


does buying a used p965-ds3 rev1.0 at RM230 worth it?
can it support 1333 proc for future? any diff between rev3.3 and rev1.0?

This post has been edited by mmohdnor: Aug 11 2007, 08:25 AM
kennji
post Aug 11 2007, 09:33 AM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
QUOTE(AceCombat @ Aug 10 2007, 09:02 PM)
guys...u all using E6850 until so syok,so easy to oc,what's the vcore that needed in order to go beyond 4ghz?

and u guys think P5K Deluxe is a good mobo compared to P35 DQ6?
*
waah...is it not your qx6700 more powerful? no need e6850 la...actually mine was relatively easy to hit 3.8ghz with around 1.45-1.50 vcore stable. but to hit 4ghz i need nearly 1.58-1.60 vcore to get it stable but thats way too much (too hot! shakehead.gif ) for me and my air cooling setup just wouldn't do. if you are on water i believe it will be much more desireable. thumbup.gif

p5k dlx and p35 dq6 should perform fairly similar i guess...all p35 i've seen so far should be able to do 480fsb so it comes down to the features the mobo has to offer. wait for dfi's p35 to come out la... thumbup.gif
DaRkSyThE
post Aug 11 2007, 09:59 AM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(kennji @ Aug 11 2007, 09:33 AM)
waah...is it not your qx6700 more powerful? no need e6850 la...actually mine was relatively easy to hit 3.8ghz with around 1.45-1.50 vcore stable. but to hit 4ghz i need nearly 1.58-1.60 vcore to get it stable but thats way too much (too hot! shakehead.gif ) for me and my air cooling setup just wouldn't do. if you are on water i believe it will be much more desireable.  thumbup.gif

p5k dlx and p35 dq6 should perform fairly similar i guess...all p35 i've seen so far should be able to do 480fsb so it comes down to the features the mobo has to offer. wait for dfi's p35 to come out la... thumbup.gif
*
better wait for X38. then the fun begins smile.gif
all the new tweaking options shud be fun
sHawTY
post Aug 11 2007, 10:07 AM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005

QUOTE(DaRkSyThE @ Aug 11 2007, 09:59 AM)
better wait for X38. then the fun begins smile.gif
all the new tweaking options shud be fun
*
Isn't it time for you to let go of your badaxe already? laugh.gif
gengstapo
post Aug 11 2007, 10:35 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(sHawTY @ Aug 11 2007, 10:07 AM)
Isn't it time for you to let go of your badaxe already? laugh.gif
*
hahaa.. yeahh including the x68 tongue.gif , change to qx6700 wub.gif
hakunamatata
post Aug 11 2007, 02:47 PM

On my way
****
Senior Member
511 posts

Joined: Aug 2007


what is overclocking? how to check it ? o.o sorry i noob in com
gengstapo
post Aug 11 2007, 08:25 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(hakunamatata @ Aug 11 2007, 02:47 PM)
what is overclocking? how to check it ? o.o sorry i noob in com
*
google around, it wont hurt u.. btw, click HERE icon_rolleyes.gif icon_rolleyes.gif
irenic
post Aug 11 2007, 09:26 PM

extr3me n3wbie
*******
Senior Member
7,338 posts

Joined: Jan 2003
From: Cybercity of Cyberjaya


geng, u said wanna trade our q6600 laugh.gif haha
gengstapo
post Aug 11 2007, 09:52 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(irenic @ Aug 11 2007, 09:26 PM)
geng, u said wanna trade our q6600 laugh.gif haha
*
dang u ppl vmad.gif tongue.gif

ive ady sms u regarding our deal but just ignore me.. how can u aspect me letting my q66 sitting still infront of me??

sure cant stand the OC passion leh.. blush.gif
AceCombat
post Aug 11 2007, 10:02 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


haha...i think duo core is better than my Extreme Quad,anyway,X38 is from 975X where the P35 is from P965 right?

since the P35 face no vdrop and oc quite well,i dont think we need to fork out more to pay for little difference...

DQ6 and P5k cry.gif hard to make the decision...
irenic
post Aug 11 2007, 10:09 PM

extr3me n3wbie
*******
Senior Member
7,338 posts

Joined: Jan 2003
From: Cybercity of Cyberjaya


QUOTE(gengstapo @ Aug 11 2007, 09:52 PM)
dang u ppl  vmad.gif  tongue.gif

ive ady sms u regarding our deal but just ignore me.. how can u aspect me letting my q66 sitting still infront of me??

sure cant stand the OC passion leh..  blush.gif
*
haha sabar la bro.. why? g0 so tempting ar? haha


QUOTE(AceCombat @ Aug 11 2007, 10:02 PM)
haha...i think duo core is better than my Extreme Quad,anyway,X38 is from 975X where the P35 is from P965 right?

since the P35 face no vdrop and oc quite well,i dont think we need to fork out more to pay for little difference...

DQ6 and P5k cry.gif hard to make the decision...
*
well p5k dlx for strictly oc purpose while dq6 for more general usage (oc and works) .. but IMO dq6 p35 is one of da best p35 boards... maybe u should consider between ip35 pro & dq6 p35 biggrin.gif


neway yes, x38 is workstation board (replacing the 975) while p35 is replacing the p965.. besides of its dual 16x pci-e in crossfire (& maybe SLI biggrin.gif) another advantage of x38 is it has fully support of ddr3 while p35 is not... rolleyes.gif
gmail
post Aug 11 2007, 11:22 PM

Trolling Level
*******
Senior Member
2,597 posts

Joined: Mar 2005
From: Kuala Lumpur


QUOTE(AceCombat @ Aug 11 2007, 10:02 PM)
haha...i think duo core is better than my Extreme Quad,anyway,X38 is from 975X where the P35 is from P965 right?

since the P35 face no vdrop and oc quite well,i dont think we need to fork out more to pay for little difference...

DQ6 and P5k cry.gif hard to make the decision...
*
DFI LANPARTY UT P35 for u sir?? brows.gif brows.gif
irenic
post Aug 11 2007, 11:29 PM

extr3me n3wbie
*******
Senior Member
7,338 posts

Joined: Jan 2003
From: Cybercity of Cyberjaya


haha not for me.. raymond said the retail price should be around rm1.1k.. too expensive :-s

better buy x38 straight away.. am i rite?

but the dfi looks is so tempting.. the bigass heatsink is so wow! laugh.gif
remysix
post Aug 12 2007, 08:39 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(irenic @ Aug 11 2007, 11:29 PM)
haha not for me.. raymond said the retail price should be around rm1.1k.. too expensive :-s

better buy x38 straight away.. am i rite?

but the dfi looks is so tempting.. the bigass heatsink is so wow! laugh.gif
*
i tot the word 'expsensive' is not in your vocab list tongue.gif
btw, for a WC user, the bigass heatsink is great...but for aircooling user like me...the bigass is sometime really a pain in the ass when it comes to installing the HSF...just had my xigmatek s1283 installed...due to bigass heatsink on the dq6, very troublesome to install it...even need to bend a few fins to get it installed...but so far the temp is great...currently running OCCT on my Q6600 at 3.4G@1.375v, entering 6 hours mark now...the temp is around 53-55c...the coretemp...mmm...dunno la since for G0 there is no trustable apps yet...i just straight away pump 1.375v...later will find the lower vcore for that speed... rclxms.gif
gengstapo
post Aug 12 2007, 11:52 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(remysix @ Aug 12 2007, 08:39 AM)
currently running OCCT on my Q6600 at 3.4G@1.375v, entering 6 hours mark now...the temp is around 53-55c...the coretemp...mmm...
*
sorry for being newbie here, how exactly using occt?

compared to prime95 v25.3, which shall be better?
AceCombat
post Aug 12 2007, 01:21 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


no no DFI at this moment,i decided to go for Asus P5K Deluxe since not many ppl using it here... laugh.gif
anyway,Gaygabyte too colorful,my eyes cannot open when i looking at it, rclxms.gif

anyway,as for the IP35-Pro,read some review some say it's good some says it's not as good as other review,and i look at the mobo,it's U.G.L.Y. and it looks "cheap".
remysix
post Aug 12 2007, 01:30 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Aug 12 2007, 11:52 AM)
sorry for being newbie here, how exactly using occt?

compared to prime95 v25.3, which shall be better?
*
install and run...and the best part of it, dia ada monitor the temp...tapi dia interface tu either speedfan, MBM or Everest...and the end of the test...boleh tengok the graph...
compared to prime95 v25.3...ntah la plak, nvr tried that apps/version before...


Added on August 12, 2007, 1:32 pm
QUOTE(AceCombat @ Aug 12 2007, 01:21 PM)
no no DFI at this moment,i decided to go for Asus P5K Deluxe since not many ppl using it here... laugh.gif
anyway,Gaygabyte too colorful,my eyes cannot open when i looking at it, rclxms.gif

anyway,as for the IP35-Pro,read some review some say it's good some says it's not as good as other review,and i look at the mobo,it's U.G.L.Y. and it looks "cheap".
*
yes, the giga is kinda colourfull...like the nursery, if u know what i meant...but i go for the one that perform the best...or among the best...
and btw, since i'm puting the mobo inside the casing, i'm not gonna stare at the mobo too much...eyes more on the screen tongue.gif

This post has been edited by remysix: Aug 12 2007, 01:32 PM
gengstapo
post Aug 12 2007, 01:40 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
this the prime95 25.3 screenie blush.gif

user posted image
remysix
post Aug 12 2007, 01:48 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Aug 12 2007, 01:40 PM)
this the prime95 25.3 screenie  blush.gif

user posted image
*
i know that version just that nvr tried it before...so dunno how does it stress (heat generation wise) the proc compared to OCCT...
AceCombat
post Aug 12 2007, 05:12 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006




ya.haha....lego maker....
anyway,which mobo until now is the better choice for bearlake?

DQ6? or P5K Deluxe?IP 35-Pro?

QUOTE
yes, the giga is kinda colourfull...like the nursery, if u know what i meant...but i go for the one that perform the best...or among the best...
and btw, since i'm puting the mobo inside the casing, i'm not gonna stare at the mobo too much...eyes more on the screen tongue.gif


This post has been edited by AceCombat: Aug 12 2007, 05:14 PM
gengstapo
post Aug 12 2007, 06:38 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
hmmm, 200mhz less to get 3.4Ghz.. hope can do with my cikai setup rclxms.gif rclxms.gif
is there any hope ?? brows.gif

user posted image

This post has been edited by gengstapo: Aug 12 2007, 06:41 PM
remysix
post Aug 12 2007, 07:51 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(AceCombat @ Aug 12 2007, 05:12 PM)
ya.haha....lego maker....
anyway,which mobo until now is the better choice for bearlake?

DQ6? or P5K Deluxe?IP 35-Pro?
*
so far i'm ok wif dq6...last trial, managed to run at 500fsb...but then maybe my ram limiting the push...
toughnut
post Aug 15 2007, 10:58 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
actually i use asus P5K Deluxe and gigabyte P35-DS3P.

in term of layout, DS3P>P5K Dlx

in term of color, DS3P>P5K Dlx (like cocktail versus black coffee...)

in term of bios, DS3P=P5K Dlx (likes the oc setting in Dlx but some function missing like multiple profile, quick boot select, etc)

in term of oc, no direct comparison tested. actually wanna test my friend Q6600 on my P35-DS3P but tediously to remove HSF, apply TIM, attached HSF, test, remove HSF, apply TIM, repeat for few times....

btw, B3 Q6600 oc well on Dlx, 3Ghz stock voltage orthos and occt stable. Other spec is silverstone decathlon DA650, HD2900XT, 2GB ballistix tracer 800

pic attached below is my first run with Q6600, directly running 3.2Ghz without problems (except heat). notice that the ram is DDR3 instead of DDR2 sweat.gif
Attached Image

This post has been edited by toughnut: Aug 15 2007, 11:02 AM
-pWs-
post Aug 15 2007, 11:09 AM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6


QUOTE(toughnut @ Aug 15 2007, 10:58 AM)
actually i use asus P5K Deluxe and gigabyte P35-DS3P.

in term of layout, DS3P>P5K Dlx

in term of color, DS3P>P5K Dlx (like cocktail versus black coffee...)

in term of bios, DS3P=P5K Dlx (likes the oc setting in Dlx but some function missing like multiple profile, quick boot select, etc)

in term of oc, no direct comparison tested. actually wanna test my friend Q6600 on my P35-DS3P but tediously to remove HSF, apply TIM, attached HSF, test, remove HSF, apply TIM, repeat for few times....

btw, B3 Q6600 oc well on Dlx, 3Ghz stock voltage orthos and occt stable. Other spec is silverstone decathlon DA650, HD2900XT, 2GB ballistix tracer 800

pic attached below is my first run with Q6600, directly running 3.2Ghz without problems (except heat). notice that the ram is DDR3 instead of DDR2 sweat.gif
*
How come CAS Latency = 32? Is it cpu-z bug?
Intel really scare well in oc. Tempting man.
Q66 damn nice in term of oc and price thumbup.gif

sign0014.gif What you waiting for? Join Folding@Home with your giant monster laugh.gif

-pWs-

This post has been edited by -pWs-: Aug 15 2007, 11:12 AM
toughnut
post Aug 15 2007, 11:32 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
@-pWs-
my pc still virgin. not even connected to internet before...we dont have online connection in hostel. offline university...

btw, that Q6600 rig not mine. just help buy and assemble for my friend. icthy and OC it, with permission of course. that ram correct timing is 4-4-4-4, DDR800 vdimm=2V
-pWs-
post Aug 15 2007, 02:35 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6


QUOTE(toughnut @ Aug 15 2007, 11:32 AM)
@-pWs-
my pc still virgin. not even connected to internet before...we dont have online connection in hostel. offline university...

btw, that Q6600 rig not mine. just help buy and assemble for my friend. icthy and OC it, with permission of course. that ram correct timing is 4-4-4-4, DDR800 vdimm=2V
*
Haha...icthy laugh.gif
Are you sure the timing is what you stated here? Then how come the cpu-z show different timing one? blink.gif
Aiyaa..no online connection. If not, just join Folding tongue.gif

-pWs-
toughnut
post Aug 15 2007, 03:45 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
that cpuz totally screwed one. if not mistaken, already been mentioned by one of the forumer before. even DDR showed DDR3 while another page showed DDR2... CAS #32 is insane too.
SlayerXT
post Aug 15 2007, 05:10 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Is ur friend interests in oc his pc? Why not u just continue tweaking his pc tongue.gif
toughnut
post Aug 15 2007, 05:18 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
hmmm. then better i keep it for him lol.

btw, his Q6600 also cooled by Xigmatek S1283 HDT but with single fan config. still hot, load around 66C with 1.325v 3GHz
-pWs-
post Aug 15 2007, 10:52 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6


QUOTE(toughnut @ Aug 15 2007, 03:45 PM)
that cpuz totally screwed one. if not mistaken, already been mentioned by one of the forumer before. even DDR showed DDR3 while another page showed DDR2... CAS #32 is insane too.
*
I see. Thanks for telling.
Now I only know it. I thought CPU-z got bug in displaying Vcore only

-pWs-
ariesto
post Aug 16 2007, 03:45 PM

Casual
***
Junior Member
454 posts

Joined: Dec 2006
From: Mars


Hi all, I have a question here really need your pros answers.

I would like to know how inaccurate is CPU-Z or maybe some other reason that cause my below issue.

My BIOS setting was, core speed 2128MHz; x8mutiplier; bus speed 266MHz, other setting in BIOS were all auto.

But the CPU-z was showing core speed 1600MHz; x6multiplier; bus speed 266MHz.

My rig for your info,
Processor : E6420
Mobo : GA-P35-DS3R rev2
Memory : 2GB Mushkin Value Ram
GPU : Winfast 8600GT
PSU : Enermax FMA2 535W

Your helpful answer will be highly appreciated, TY.
kennji
post Aug 16 2007, 03:56 PM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
its the C1E functioning...it will lower your setting to save energy during idle. it will jump back to the bios setting when the CPU is loaded. search around in your bios to disable this function.
HaHaNoCluE
post Aug 16 2007, 05:35 PM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


QUOTE(toughnut @ Aug 15 2007, 03:45 PM)
that cpuz totally screwed one. if not mistaken, already been mentioned by one of the forumer before. even DDR showed DDR3 while another page showed DDR2... CAS #32 is insane too.
*
try cpu-z 1.40.9... this version finally showing the vcpu correctly... rclxms.gif
VT-Ten
post Aug 16 2007, 09:23 PM

On my way
****
Senior Member
520 posts

Joined: Mar 2007



where to get cpu-z v 1.40.9. the latest that is published is v1.40.5
coolice
post Aug 16 2007, 09:39 PM

Team OCD!
******
Senior Member
1,857 posts

Joined: Sep 2004
From: ocdrift.com


do note tat 1.40.8 and 1.40.9 couldnt save validation file smile.gif

edited:but the vcore showing corrected rclxms.gif

This post has been edited by coolice: Aug 16 2007, 09:42 PM
mmohdnor
post Aug 16 2007, 10:12 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star


guys, between abit p35-e and gigabyte p35-ds3, which one should i go for?
budget is RM430 max.

i'm choosing for a friend and gonna pair it with E6750 or E6550 ...
any comments on these two boards?
dun feel like letting him use 965 chipsets anymore lah

This post has been edited by mmohdnor: Aug 16 2007, 10:25 PM
kmarc
post Aug 16 2007, 10:30 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(mmohdnor @ Aug 16 2007, 10:12 PM)
guys, between abit p35-e and gigabyte p35-ds3, which one should i go for?
budget is RM430 max.

i'm choosing for a friend and gonna pair it with E6750 or E6550 ...
any comments on these two boards?
dun feel like letting him use 965 chipsets anymore lah
*
I have seen forumers recommending the abit IP35-E. As far as I know, this mobo doesn't come with full solid caps and only support DDR2-800 (this is the specs on their website). Take a look at their website to see the specs.

I still recommend the P35-DS3. I consider this mobo as a cheap value-for-money performance mobo. Full solid caps and supports DDR2-1066.

For my mobo, can overclock the bus speed to 480mhz without increasing the voltages!!! smile.gif
tone
post Aug 17 2007, 01:01 AM

Getting Started
**
Junior Member
231 posts

Joined: Sep 2004


Im using Abit IP35-E..max fsb 470mhz only.
not recommanded ! Get urself a biostar P35 mobo..580mhz fsb!!!
toughnut
post Aug 17 2007, 08:18 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
try biostar or gigabyte P35 board. for abit, only get if if you go for Pro version.
t3chn0m4nc3r
post Aug 19 2007, 02:08 AM

Teh Necron Lord
*******
Senior Member
4,139 posts

Joined: Sep 2006
From: Internet


Here's my new P35 result... need 1.4V and above to make it stable... Temp at 70 full load... not using this 24/7...

I use this 24/7 instead... full load 62... icon_idea.gif
remysix
post Aug 19 2007, 07:11 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(t3chn0m4nc3r @ Aug 19 2007, 02:08 AM)
Here's my new P35 result... need 1.4V and above to make it stable... Temp at 70 full load... not using this 24/7...

I use this 24/7 instead... full load 62... icon_idea.gif
*
come on bro, how come u only run at 2.8G daily. at least pump to 3Ghz. r u folding 24/7. if not than the 62c only 'kadang-kadang'.
what kind of cooling do u used?
max_87
post Aug 19 2007, 08:23 AM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
Here are some of my E6850 overclocking results biggrin.gif Watercooled

My 24/7 settings:
Attached Image

4GHz, only possible @ low ambient though a.k.a aircon laugh.gif rolleyes.gif
Attached Image

This post has been edited by max_87: Aug 19 2007, 08:24 AM
t3chn0m4nc3r
post Aug 19 2007, 09:37 AM

Teh Necron Lord
*******
Senior Member
4,139 posts

Joined: Sep 2006
From: Internet


QUOTE(remysix @ Aug 19 2007, 08:11 AM)
come on bro, how come u only run at 2.8G daily. at least pump to 3Ghz. r u folding 24/7. if not than the 62c only 'kadang-kadang'.
what kind of cooling do u used?
*
maintaining the proc temp to as low as possible... so tat it lives long... juz using Gigabyte G-Power Pro air cooler... nothing tat special... average temp is 56... i not folding or anything wif this rig... more to gaming... maybe wif another rig when my monitor comes... smile.gif
HaHaNoCluE
post Aug 20 2007, 03:27 AM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


QUOTE(max_87 @ Aug 19 2007, 08:23 AM)
Here are some of my E6850 overclocking results biggrin.gif Watercooled

My 24/7 settings:
» Click to show Spoiler - click again to hide... «


4GHz, only possible @ low ambient though a.k.a aircon  laugh.gif rolleyes.gif
» Click to show Spoiler - click again to hide... «

*
bro, what mobo r u using??? oso what wc setup??? looks pretty good...
max_87
post Aug 20 2007, 05:25 AM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
I'm using Abit IP35 Pro wink.gif As for the watercooling, the waterblock is the very old Zalman ZM-WB2, very old swiftech radiator and Eheim 1048 pump sweat.gif All are discontinued products except maybe the Eheim pump. This watercooling set is actually given by one of my friend since he already upgraded to Fuzion block, MCP655 pump and MCP320 radiator (really thanks a lot to him). Still, it performs at least 5C better than Scythe Infinity with dual 3000+RPM fans thumbup.gif I can't really afford myself a watercooling set cry.gif

Will take pictures of my humble watercooling setup and post it later, my camera just ran out of batteries when I need it sweat.gif

This post has been edited by max_87: Aug 20 2007, 05:27 AM
max_87
post Aug 20 2007, 06:08 AM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
Using quad low RPM fans on the radiator, I'm a fan of quiet cooling laugh.gif

Attached Image Attached Image
baok
post Aug 20 2007, 11:40 AM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005


QUOTE(max_87 @ Aug 20 2007, 06:08 AM)
Using quad low RPM fans on the radiator, I'm a fan of quiet cooling laugh.gif

Attached Image Attached Image
*
that is your 24/7 rig?? sweat.gif notworthy.gif


remysix
post Aug 20 2007, 11:55 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(baok @ Aug 20 2007, 11:40 AM)
that is your 24/7 rig?? sweat.gif notworthy.gif
*
biggrin.gif rclxub.gif shocking.gif rclxms.gif

@max_87...how's ur temp with that bare naked and shaved tongue.gif setup...show us some screenie la...
max_87
post Aug 20 2007, 12:30 PM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(baok @ Aug 20 2007, 11:40 AM)
that is your 24/7 rig?? sweat.gif notworthy.gif
*
Yes, I don't have a casing right now biggrin.gif doh.gif

QUOTE(remysix @ Aug 20 2007, 11:55 AM)
biggrin.gif  rclxub.gif  shocking.gif  rclxms.gif

@max_87...how's ur temp with that bare naked and shaved tongue.gif  setup...show us some screenie la...
*
Idle:
Attached Image

Load:
Attached Image

Ambient temperature is around 27~28C
HaHaNoCluE
post Aug 20 2007, 02:10 PM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


nice... dat ec set oso not bad still perform very well... what a fren u got ther... lucky u... hehehe...
baok
post Aug 20 2007, 04:01 PM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005


ah... 55C load at 3.9gig is good temp rclxms.gif

perhaps you want to stay naked with your rig tongue.gif drool.gif


toughnut
post Aug 20 2007, 04:59 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
look really messy that rig tongue.gif
but nice temp and clock though. 3.9Ghz at 55C thumbup.gif
irangan
post Aug 20 2007, 05:37 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


@max_87

What is ur processor Batch Code? E6850 proc can reach 4ghz easily even with air cooling. Not to mention that you are using IP35-Pro.

Btw, with 27~28C ambient temp... Full load temp for E6850 @ 3.9ghz shouldnt exceed 50'C under WC. Time to upgrade your WC set. Hehe..
max_87
post Aug 20 2007, 06:04 PM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(irangan @ Aug 20 2007, 05:37 PM)
@max_87

What is ur processor Batch Code? E6850 proc can reach 4ghz easily even with air cooling. Not to mention that you are using IP35-Pro.

Btw, with 27~28C ambient temp... Full load temp for E6850 @ 3.9ghz shouldnt exceed 50'C under WC. Time to upgrade your WC set. Hehe..
*
I don't remember. Yes, but most are not Prime95 stable. To me, SuperPI/3DMark/suicide/etc runs don't count tongue.gif

Where did you get your temperature reading? smile.gif If it's from your mainboard's sensor, then it's not comparable to mine sweat.gif My friend's Fuzion/MCR320/MCP655 is around 5C better than this outdated setup, readings from IP35 Pro, same mainboard. So the temperature can still exceed 50C if you are talking about readings from Abit IP35 Pro's sensor.

I couldn't afford a new watercooling set, so no upgrading rolleyes.gif

This post has been edited by max_87: Aug 20 2007, 06:06 PM
gmail
post Aug 20 2007, 06:22 PM

Trolling Level
*******
Senior Member
2,597 posts

Joined: Mar 2005
From: Kuala Lumpur


G0 Q6600 already reach lyp.

saw this in cycom while hooting my E6850

user posted image
max_87
post Aug 20 2007, 06:25 PM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(baok @ Aug 20 2007, 04:01 PM)
ah... 55C load at 3.9gig is good temp rclxms.gif

perhaps you want to stay naked with your rig tongue.gif drool.gif
*
QUOTE(toughnut @ Aug 20 2007, 04:59 PM)
look really messy that rig tongue.gif
but nice temp and clock though. 3.9Ghz at 55C thumbup.gif
*
The temperature is only ok if you ask me smile.gif Since my ambient is 28C. If no aircon then the ambient would be around 30-32C, so the temperature would be around 58C under normal condition. Keep in mind that this are readings from a mainboard sensor, so don't take it too seriously wink.gif
remysix
post Aug 20 2007, 08:55 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gmail @ Aug 20 2007, 06:22 PM)
G0 Q6600 already reach lyp.

saw this in cycom while hooting my E6850

user posted image
*
must have passed u by today...if u were there around 2 something...IIRC the code is L723A627...something like that la...all has the same code, a few bunch of them.
irangan
post Aug 20 2007, 10:45 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(max_87 @ Aug 20 2007, 06:04 PM)
I don't remember. Yes, but most are not Prime95 stable. To me, SuperPI/3DMark/suicide/etc runs don't count tongue.gif

Where did you get your temperature reading? smile.gif If it's from your mainboard's sensor, then it's not comparable to mine  sweat.gif My friend's Fuzion/MCR320/MCP655 is around 5C better than this outdated setup, readings from IP35 Pro, same mainboard. So the temperature can still exceed 50C if you are talking about readings from Abit IP35 Pro's sensor.

I couldn't afford a new watercooling set, so no upgrading rolleyes.gif
*
Its depends on which batch your proc. My L720A can prime at 4ghz (1.46vcore).

I think your proc is under those hotter e6850 batch. From what I tested, there is some or I should say most e6850 is cool even under load but some proc like the one I am using now is belongs to hotter ver. 5-10'c higher than those cool ver. That's why, i ask for your batch code.
max_87
post Aug 20 2007, 11:28 PM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(irangan @ Aug 20 2007, 10:45 PM)
Its depends on which batch your proc. My L720A can prime at 4ghz (1.46vcore).

I think your proc is under those hotter e6850 batch. From what I tested, there is some or I should say most e6850 is cool even under load but some proc like the one I am using now is belongs to hotter ver. 5-10'c higher than those cool ver. That's why, i ask for your batch code.
*
Mine is L720Axxx, couldn't remember the last three numbers behind. My 4GHz prime screenshot is on the previous page.

This post has been edited by max_87: Aug 20 2007, 11:31 PM
kennji
post Aug 21 2007, 09:18 AM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
my e6850 is also the L720A batch. can only get stable at 4ghz with somewhere 1.5625vcore +- on air and its very hot indeed, somewhere around the 65C mark at full load...

thast why i drop to 3.75ghz for 24/7 using 1.4125vcore that runs much cooler now. observing quite a gap for vcore between 3.8ghz and 4ghz.
max_87
post Aug 21 2007, 03:35 PM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(kennji @ Aug 21 2007, 09:18 AM)
my e6850 is also the L720A batch. can only get stable at 4ghz with somewhere 1.5625vcore +- on air and its very hot indeed, somewhere around the 65C mark at full load...

thast why i drop to 3.75ghz for 24/7 using 1.4125vcore that runs much cooler now. observing quite a gap for vcore between 3.8ghz and 4ghz.
*
Yeah, 1.55v+ is too much for aircoolers, it's totally impossible to keep the temperature under 60C unless you are living somewhere with 1337 ambient temperature laugh.gif

I stick to 3.9GHz @ 1.43v for 24/7 use smile.gif
leslie0880
post Aug 21 2007, 11:45 PM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



this is my Q6600 super pi resu1t on the disappoint N680i cry.gif cry.gif ..................
even + more volt still cant go up ady..... really BIG WALL of it.......

P/S: tampoi add my result,i using Artic Cooling freeze 7 pro

user posted image

This post has been edited by leslie0880: Aug 21 2007, 11:46 PM
tone
post Aug 22 2007, 12:20 AM

Getting Started
**
Junior Member
231 posts

Joined: Sep 2004


max_87 :

eh ...look similar like mine! biggrin.gif

Attached Image

This post has been edited by tone: Aug 22 2007, 12:22 AM
max_87
post Aug 22 2007, 01:11 AM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(tone @ Aug 22 2007, 12:20 AM)
max_87 :

eh ...look similar like mine!  biggrin.gif

Attached Image
*
hahaha, no casing also laugh.gif Is that IP35-E?

This post has been edited by max_87: Aug 22 2007, 01:11 AM
extremeocer
post Aug 22 2007, 01:24 AM

Casual
***
Junior Member
302 posts

Joined: Jun 2007
From: Johor



QUOTE(leslie0880 @ Aug 21 2007, 11:45 PM)
this is my Q6600 super pi resu1t on the disappoint N680i cry.gif  cry.gif ..................
even + more volt still cant go up ady..... really BIG WALL of it.......

P/S: tampoi add my result,i using Artic Cooling freeze 7 pro

user posted image
*
N680i need GTL reference mod to enable better OC on C2Q. Frankly speaking 15s is very slow. Do the mod and with better cooling i bet you can hit 12s.
leslie0880
post Aug 22 2007, 08:02 AM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



QUOTE(extremeocer @ Aug 22 2007, 01:24 AM)
N680i need GTL reference mod to enable better OC on C2Q. Frankly speaking 15s is very slow. Do the mod and with better cooling i bet you can hit 12s.
*
so y last time i pm u,need ur help for GTL mod lo....... icon_question.gif icon_question.gif
better cooling? u mean Water Cooling or more high perfomance air cooling?
extremeocer
post Aug 22 2007, 08:22 AM

Casual
***
Junior Member
302 posts

Joined: Jun 2007
From: Johor



QUOTE(leslie0880 @ Aug 22 2007, 08:02 AM)
so y last time i pm u,need ur help for GTL mod lo....... icon_question.gif  icon_question.gif
better cooling? u mean Water Cooling or more high perfomance air cooling?
*
not just water cooling...better water cooling. Chipset cooling also important coz it'll get a lil hot. I can help you with mod but it's not really worth the effort if you don't have good cooling.
leslie0880
post Aug 22 2007, 10:24 AM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



QUOTE(extremeocer @ Aug 22 2007, 08:22 AM)
not just water cooling...better water cooling. Chipset cooling also important coz it'll get a lil hot. I can help you with mod but it's not really worth the effort if you don't have good cooling.
*
so sad lah.....my Water cooling sold out ady......
last time lazy to setup wc more....
so cahnge back to air colling.....
i oso how to make my SB&NB more cool..... no space let me add fan ady.....
maybe will go buy Water cooling some more......
run for testing and oc only....haha
max_87
post Aug 22 2007, 11:26 AM

New Member
*
Junior Member
27 posts

Joined: Jun 2007
QUOTE(leslie0880 @ Aug 22 2007, 10:24 AM)
so sad lah.....my Water cooling sold out ady......
last time lazy to setup wc more....
so cahnge back to air colling.....
i oso how to make my SB&NB more cool..... no space let me add fan ady.....
maybe will go buy Water cooling some more......
run for testing and oc only....haha
*
Watercooling is the only way to go if you want good overclock on quads wink.gif Aircooling is very very difficult unless you migrate to somewhere with very low ambient temperature laugh.gif doh.gif
extremeocer
post Aug 22 2007, 12:09 PM

Casual
***
Junior Member
302 posts

Joined: Jun 2007
From: Johor



QUOTE(max_87 @ Aug 22 2007, 11:26 AM)
Watercooling is the only way to go if you want good overclock on quads wink.gif Aircooling is very very difficult unless you migrate to somewhere with very low ambient temperature laugh.gif  doh.gif
*
Ambient is important, but also depends on what cooling you use. I always run my rig in 35c - 38c ambient sweat.gif just to test it out. So basically i am half naked when i bench. My cascade can still hold the cpu at -70c. Chipset is around 30c. I also found out that cooling the chipset can give you around 20-30Mhz FSB. I might phase cool the chipset soon. But at the mean time i'll use super high CFM fan to cool the chipset.
leslie0880
post Aug 22 2007, 03:12 PM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



QUOTE(max_87 @ Aug 22 2007, 11:26 AM)
Watercooling is the only way to go if you want good overclock on quads wink.gif Aircooling is very very difficult unless you migrate to somewhere with very low ambient temperature laugh.gif  doh.gif
*
whn i OC,i will on the air-con v 16'c temp... tongue.gif
i know water cooling good but too bad.....haiz..........
sold out ady......
last time using D5 pump + ocqq rediator + ocqq Block + PC ice

QUOTE(extremeocer @ Aug 22 2007, 12:09 PM)
Ambient is important, but also depends on what cooling you use. I always run my rig in 35c - 38c ambient sweat.gif just to test it out. So basically i am half naked when i bench. My cascade can still hold the cpu at -70c. Chipset is around 30c. I also found out that cooling the chipset can give you around 20-30Mhz FSB. I might phase cool the chipset soon. But at the mean time i'll use super high CFM fan to cool the chipset.
*
can u post some pict let us reference?

This post has been edited by leslie0880: Aug 22 2007, 03:19 PM
extremeocer
post Aug 22 2007, 03:30 PM

Casual
***
Junior Member
302 posts

Joined: Jun 2007
From: Johor



QUOTE(leslie0880 @ Aug 22 2007, 03:12 PM)
whn i OC,i will on the air-con v 16'c temp... tongue.gif
i know water cooling good but too bad.....haiz..........
sold out ady......
last time using D5 pump + ocqq rediator + ocqq Block + PC ice
can u post some pict let us reference?
*
What pics are you refering to? Let me just put it in words....without active chipset cooling, max FSB i can hit is 520FSB as the NB is rather hot. But with sufficient cooling, i can hit 540FSB and still counting. Phase cooling the chipset wont give a big margin...but perhaps another 10C to 15C.

As for ambient, i prefer to have the room warm...around 38C and yes, its very sweaty so that I can test the stability of my rig. There is no point using an ambient of 16C to test the rig as you cant really stress test the rig fully. But thats only for me....air cooling with high OC is a no no at at 38C ambient. You don't want a smokey rig eh.

If i turn on the aircon, room ambient at 17c....my cpu temps will go as low as -80C. Chipset temps will be at 28c. But to achieve these temps i have to turn on the air con everytime i use my rig. Its a lil bit unrealistic, don't ya think.

This post has been edited by extremeocer: Aug 22 2007, 03:34 PM
intune
post Aug 24 2007, 10:58 AM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



Bro T4mpoi ... add me to the List!

Mobo : Biostar 965PT Rev1.0 (ol Skool)
CPU: Q6600 G0
Rams: Team Value Rams DDRII 667MHz (D9's) - DDRII 1000 MHz (5-5-5-15)
Cooling: Xigmatek SL1283 + Arctic Cooling MX-2 TIM
PSU : Silverstone ST56F
NB: TT Spirit II


so far this 3.6Ghz is really stable . smile.gif


[attachmentid=283575]

This post has been edited by intune: Aug 25 2007, 10:13 AM
extremeocer
post Aug 24 2007, 11:10 AM

Casual
***
Junior Member
302 posts

Joined: Jun 2007
From: Johor



Bro, intune....how to add you when you never show your final 1M PI result. Need the final result.
remysix
post Aug 24 2007, 11:20 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(extremeocer @ Aug 24 2007, 11:10 AM)
Bro, intune....how to add you when you never show your final 1M PI result. Need the final result.
*
Lol...maybe he's trying to be in the sub-12s league...

@intune...what vore did u run that 3.4 and 3.5?
intune
post Aug 24 2007, 12:31 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(extremeocer @ Aug 24 2007, 11:10 AM)
Bro, intune....how to add you when you never show your final 1M PI result. Need the final result.
*
Post edited.. now at 3.6Ghz full Pi completed.. also nice temp!

blush.gif


Added on August 24, 2007, 12:33 pm
QUOTE(remysix @ Aug 24 2007, 11:20 AM)
Lol...maybe he's trying to be in the sub-12s league...

@intune...what vore did u run that 3.4 and 3.5?
*
sub-12 league.. hope youre kidding. blush.gif

Anyways managed to reach 3.6Ghz today .. full Pi test completed.. also happy wif temp.

Vcore at 1.35 abit vdroop.. but overall happy with results.

Did a small test 5mins ago at 3.78GHZ ..still need tweaking!

rclxms.gif

This post has been edited by intune: Aug 24 2007, 12:33 PM
remysix
post Aug 24 2007, 03:30 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(intune @ Aug 24 2007, 12:31 PM)
Post edited.. now at 3.6Ghz full Pi completed.. also nice temp!

blush.gif


Added on August 24, 2007, 12:33 pm

sub-12 league.. hope youre kidding.  blush.gif

Anyways managed to reach 3.6Ghz today .. full Pi test completed.. also happy wif temp.

Vcore at 1.35 abit vdroop.. but overall happy with results.

Did a small test 5mins ago at 3.78GHZ ..still need tweaking!

rclxms.gif
*
u meant 3.6Ghz at 1.35v and vdroop summore...is it orthos/prime/OCCT stable?
if yes, that's a very good oc especially for a quad rclxms.gif

This post has been edited by remysix: Aug 24 2007, 03:30 PM
intune
post Aug 24 2007, 03:39 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(remysix @ Aug 24 2007, 03:30 PM)
u meant 3.6Ghz at 1.35v and vdroop summore...is it orthos/prime/OCCT stable?
if yes, that's a very good oc especially for a quad rclxms.gif
*
Yeah OCCT stable.. will do atleast a 24hrs test soon.
ahsiah
post Aug 25 2007, 08:18 AM

Asus ROG Fan
*****
Senior Member
875 posts

Joined: Oct 2004
From: Selayang, Selangor


Hi T4mpoi ... add me to the List!

Mobo : DFI P965-S Dark
CPU: E6750 G0
Rams: Super Talent 2GBKit DDR-800
Cooling: Xigmatek SL1283 + Arctic Cooling MX-1 TIM
PSU : Enermax Infinity 650W
NB: Noctual NC-U6
SB: Thermalright HR-05SLI


3747Mhz with Prime Orthos for 8 Hours. Stable.

Below is the screen shot for the result.

user posted image

This post has been edited by ahsiah: Aug 25 2007, 08:20 AM
kmarc
post Aug 25 2007, 01:22 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(ahsiah @ Aug 25 2007, 08:18 AM)
Hi T4mpoi ... add me to the List!

Mobo : DFI P965-S Dark
CPU: E6750 G0
Rams: Super Talent 2GBKit DDR-800
Cooling: Xigmatek SL1283 + Arctic Cooling MX-1 TIM
PSU : Enermax Infinity 650W
NB: Noctual NC-U6
SB: Thermalright HR-05SLI
3747Mhz with Prime Orthos for 8 Hours. Stable.
Nice. What's your vcore?

How about core temp at load? What temperature monitoring software are you using?
Vtec(Rock)
post Aug 25 2007, 05:16 PM

On my way
****
Junior Member
500 posts

Joined: Sep 2005
From: Taiping/Perak



wat vcore u go in 3.6ghz q6600?


Added on August 25, 2007, 5:18 pm
QUOTE(intune @ Aug 24 2007, 10:58 AM)
Bro T4mpoi ... add me to the List!

Mobo : Biostar 965PT Rev1.0 (ol Skool)
CPU: Q6600 G0
Rams: Team Value Rams DDRII 667MHz (D9's) - DDRII 1000 MHz (5-5-5-15)
Cooling: Xigmatek SL1283 + Arctic Cooling MX-2 TIM
PSU : Silverstone ST56F
NB: TT Spirit II
so far this 3.6Ghz is really stable .  smile.gif
[attachmentid=283575]
*
hie guy.this is my superpi 12sec e6750.4ghz on air
hope i can be better tomorow.waiting a new wc kit to max the oc.8x500mhz

This post has been edited by Vtec(Rock): Aug 25 2007, 05:51 PM


Attached thumbnail(s)
Attached Image
ahsiah
post Aug 25 2007, 05:29 PM

Asus ROG Fan
*****
Senior Member
875 posts

Joined: Oct 2004
From: Selayang, Selangor


QUOTE(kmarc @ Aug 25 2007, 01:22 PM)
Nice. What's your vcore?

How about core temp at load? What temperature monitoring software are you using?
*
I set my Vcore at 1.55v and Vdimm at 2.2v. I am using SmartGuardian. Idle at 38c and full load (8hours) 70c. Don't want to go further unless apply MX-2 and configure HSF for push and pull got a better performance.

This post has been edited by ahsiah: Aug 25 2007, 05:36 PM
Vtec(Rock)
post Aug 25 2007, 05:46 PM

On my way
****
Junior Member
500 posts

Joined: Sep 2005
From: Taiping/Perak



bro tampoi put me in smile.gif smile.gif

C2D E6750 (GO) 8x500(1.575v)
cruzial aniversary ddr667@ddr1000 4-4-4-9
Noctua U12F(AC FAN MOVE IN)
Acbel R8 650W
Biostar Tp35D2-A7
2600XT ATI
Samsung 160Gb sata 2.


othos 3 hours stable icon_idea.gif icon_idea.gif icon_idea.gif icon_idea.gif icon_rolleyes.gif icon_rolleyes.gif

This post has been edited by Vtec(Rock): Aug 25 2007, 05:57 PM


Attached thumbnail(s)
Attached Image Attached Image
kiong
post Aug 26 2007, 03:08 AM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


Sifu T4mpoi ... add me to the List!

Mobo :Asus P5k Premium black pearl edi
CPU: Q6600 G0
Rams: Crucial 10'th anne Rams DDRII 667MHz - DDRII 830 MHz (4-4-4-12)
Cooling: Intel stock HSF
PSU : Gigabyte otig 550Watt
NB: none


Attached thumbnail(s)
Attached Image
rlhc17
post Aug 26 2007, 12:31 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



Mobo : Biostar T-Force TP35D2-A7
CPU: Q6600 G0
Rams: Kingston KVR D9GKX DDRII 800MHZ
Cooling: Swiftech WC

This post has been edited by rlhc17: Aug 26 2007, 12:31 PM


Attached thumbnail(s)
Attached Image
intune
post Aug 26 2007, 04:17 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(rlhc17 @ Aug 26 2007, 12:31 PM)
Mobo : Biostar T-Force TP35D2-A7
CPU: Q6600 G0
Rams: Kingston KVR D9GKX DDRII 800MHZ
Cooling: Swiftech WC
*
Another great results! notworthy.gif Mine telling us the load temp on that OC? hmm.gif

This post has been edited by intune: Aug 26 2007, 04:18 PM
rlhc17
post Aug 26 2007, 11:46 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



QUOTE(intune @ Aug 26 2007, 04:17 PM)
Another great results!   notworthy.gif Mine telling us the load temp on that OC?  hmm.gif
*
those speed benching only not dare to run full load after kaboooom............. doh.gif
coz using normal 3phase mobo

This post has been edited by rlhc17: Aug 26 2007, 11:47 PM
HaHaNoCluE
post Aug 27 2007, 12:47 AM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


wah so many ppl doing 4.0ghz with Q6600 oredi.... another fella on 4.0ghz club.... goooood job bro... ehhh, try make it stable... the biostar is really a very solid performer ar... notworthy.gif
rlhc17
post Aug 27 2007, 02:01 AM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



QUOTE(HaHaNoCluE @ Aug 27 2007, 12:47 AM)
wah so many ppl doing 4.0ghz with Q6600 oredi.... another fella on 4.0ghz club.... goooood job bro... ehhh, try make it stable... the biostar is really a very solid performer ar... notworthy.gif
*
yup, biostar t-force cheap & thumbup.gif
running Q6600 G0 1 : 1 492fsb : 492mem (4 4 4 10)





Attached thumbnail(s)
Attached Image
Vtec(Rock)
post Aug 27 2007, 10:40 AM

On my way
****
Junior Member
500 posts

Joined: Sep 2005
From: Taiping/Perak



QUOTE(rlhc17 @ Aug 27 2007, 02:01 AM)
yup, biostar t-force cheap &  thumbup.gif
running Q6600 G0 1 : 1 492fsb : 492mem (4 4 4 10)
*
yeah.gihly recomend biostar t-force cheap and good.easy setup
remysix
post Aug 27 2007, 11:19 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


will update mine once i got my WC loops set up; first time user - got shaking leg a bit biggrin.gif
toughnut
post Aug 27 2007, 02:00 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
sweat.gif all Q6600 minimum speed seem like 4Ghz.... scary... time to burn my pocket? cry.gif
antudegil
post Aug 27 2007, 03:17 PM

Getting Started
**
Junior Member
147 posts

Joined: Jun 2005
hi. still new in OC. currently OC my new rig and here the result.

idle

user posted image


full load

user posted image

my system :

Asus p5b deluxe wifi
1x2 G DDR2 800Mhz Supertalent
Evga 8800GTS 640MB Superclocked
Silverstone 650Watt
Seagate 320G
Thermaltake Big Typhoon VX

i need some feedback from u guys. i still confius is it stable or not. i'm consider that my new setting is stable since can past 5 hours without problem ( dont make doh.gif to me since i'm still learning tongue.gif ).

forgot to write down the rest of setting (NB volt, vcore and etc). will update soon.
hope you guys can give a comment so that i can improve my OC skills.

p/s : the reading of speedfan not accurate. sometimes CPU temp can become 90'C (just 1 time - in stress mode) and also the high reading in core is 51'C when i'm stress it in 3.5G.

This post has been edited by antudegil: Aug 27 2007, 03:21 PM
remysix
post Aug 27 2007, 03:30 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(antudegil @ Aug 27 2007, 03:17 PM)
hi. still new in OC. currently OC my new rig and here the result.

idle


full load



my system :

Asus p5b deluxe wifi
1x2 G DDR2 800Mhz Supertalent
Evga 8800GTS 640MB Superclocked
Silverstone 650Watt
Seagate 320G
Thermaltake Big Typhoon VX

i need some feedback from u guys. i still confius is it stable or not. i'm consider that my new setting is stable since can past 5 hours without problem ( dont make  doh.gif to me since i'm still learning  tongue.gif ).

forgot to write down the rest of setting (NB volt, vcore and etc). will update soon.
hope you guys can give a comment so that i can improve my OC skills.

p/s : the reading of speedfan not accurate. sometimes CPU temp can become 90'C (just 1 time - in stress mode) and also the high reading in core is 51'C when i'm stress it in 3.5G.
*
well if u feels it stable, ok la kot. but to share my experience...last time run orthos to test. 5 hours - still green. 10 hours, green also. 15 hours, green also thumbup.gif . 17 hours...eeekkk, red.
so, not sure la. i normally ran for 12 hours at least.others may have different view.

Vtec(Rock)
post Aug 27 2007, 04:45 PM

On my way
****
Junior Member
500 posts

Joined: Sep 2005
From: Taiping/Perak



bro tampoi update my max air cool superpi.will post up new result again after i get my wc soon....
here we go...biostar really rock solid and save $$$!!highly recomend!


Attached thumbnail(s)
Attached Image
HaHaNoCluE
post Aug 28 2007, 02:15 PM

Newbie
****
Senior Member
628 posts

Joined: Oct 2006


bloody hell, i'm saving the $$$ for the penryn n x38 but u guys really tempting me to play the G0 n P35 now...

any1 tried the abit F-190HD matx with 4400 or any c2d??? wanna build 1 for HTPC...
gmail
post Aug 29 2007, 08:18 PM

Trolling Level
*******
Senior Member
2,597 posts

Joined: Mar 2005
From: Kuala Lumpur


TS pls add me to the list

Attached Image

C2D E6850 (G0) 423x9 (1.45v)
Gigabyte P35-DQ6
Crucial DDR2-800 @ 1015 5-5-5-18 (D9GKX)
CM Gemin 2 with 2 x Vizo 12CM UV LED Fan
650w Enlight PowerTank

This post has been edited by gmail: Aug 29 2007, 08:19 PM
SlayerXT
post Aug 30 2007, 12:43 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Any good oc on 965P mobo with E6x50series? mellow.gif
TStAmp0i
post Aug 30 2007, 12:55 AM

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



QUOTE(gmail @ Aug 29 2007, 08:18 PM)
TS pls add me to the list

C2D E6850 (G0) 423x9 (1.45v)
Gigabyte P35-DQ6
Crucial DDR2-800 @ 1015 5-5-5-18 (D9GKX)
CM Gemin 2 with 2 x Vizo 12CM UV LED Fan
650w Enlight PowerTank
*
Hi gmail, it's better if you use the super pi mod 1.5 for more accurate listing...

Thanks smile.gif

Edit: Slayer, none other than DFI Infinity (i think) hehe!

This post has been edited by tAmp0i: Aug 30 2007, 12:56 AM
Vtec(Rock)
post Aug 31 2007, 12:44 PM

On my way
****
Junior Member
500 posts

Joined: Sep 2005
From: Taiping/Perak



brother tampoi e2140 update pls....
woh....superpi still slow.will update again after tweak well..


Attached thumbnail(s)
Attached Image
remysix
post Aug 31 2007, 12:55 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(Vtec(Rock) @ Aug 31 2007, 12:44 PM)
brother tampoi e2140 update pls....
woh....superpi still slow.will update again after tweak well..
*
sweet rclxms.gif more than 100%...this baby can oc or what!

btw vtec, ur siggy, the e6750 supposedly G0 (zero) no Go ("O") whistling.gif or did u did that on purpose

This post has been edited by remysix: Aug 31 2007, 02:35 PM
Vtec(Rock)
post Aug 31 2007, 05:59 PM

On my way
****
Junior Member
500 posts

Joined: Sep 2005
From: Taiping/Perak



QUOTE(remysix @ Aug 31 2007, 12:55 PM)
sweet rclxms.gif more than 100%...this baby can oc or what!

btw vtec, ur siggy, the e6750 supposedly G0 (zero) no Go ("O") whistling.gif or did u did that on purpose
*
haha....
yeah normal day i running e6750 GO 8x500 at air cool. drool.gif drool.gif drool.gif
today got 1 e2140 mo stepping.friend 1.so ma small try lor.damn lagancy i can drop to 3-3-3-9.2 bad bios problem.cannot run 1T.so superpi abit slower
SlayerXT
post Sep 1 2007, 02:57 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



I wonder if I can use my E6600 @ 4GHz on 965P everyday like u sad.gif

This post has been edited by §layerXT: Sep 1 2007, 02:58 AM
goldfries
post Sep 1 2007, 11:37 AM

40K Club
Group Icon
Forum Admin
44,415 posts

Joined: Jan 2003




ADD ME!
http://valid.x86-secret.com/show_oc.php?id=237022

goldfries - 3.325GHz, 416 x8 / Biostar TForce TP35D2-A7 / 2GB DDRII-667@832 / Stock Heatsink


Added on September 1, 2007, 11:42 am
QUOTE(Vtec(Rock) @ Aug 31 2007, 12:44 PM)
brother tampoi e2140 update pls....
woh....superpi still slow.will update again after tweak well..
*
at stock the E2140 was 36.593s

so considering the 16 seconds boost - very fast already! smile.gif some more so cheap. biggrin.gif

what to do, stripped down processor. smile.gif

This post has been edited by goldfries: Sep 1 2007, 11:42 AM


Attached thumbnail(s)
Attached Image
intune
post Sep 1 2007, 12:07 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(goldfries @ Sep 1 2007, 11:37 AM)
ADD ME!
http://valid.x86-secret.com/show_oc.php?id=237022

goldfries - 3.325GHz, 416 x8 / Biostar TForce TP35D2-A7 / 2GB DDRII-667@832 / Stock Heatsink


Added on September 1, 2007, 11:42 am

at stock the E2140 was 36.593s

so considering the 16 seconds boost - very fast already! smile.gif some more so cheap. biggrin.gif

what to do, stripped down processor. smile.gif
*
Really shows how good intel family processor is today! sweat.gif
gengstapo
post Sep 1 2007, 02:38 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(§layerXT @ Sep 1 2007, 02:57 AM)
I wonder if I can use my E6600 @ 4GHz on 965P everyday like u sad.gif
*
give a try 1st la br0
who know u might able to do that
remysix
post Sep 1 2007, 05:41 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Sep 1 2007, 02:38 PM)
give a try 1st la br0
who know u might able to do that
*
on daily basis? i think those who have the 'gem' G0 maybe can do it daily...on air summore. sweat.gif
-vip3rleon9-
post Sep 2 2007, 10:12 AM

.:νιÏÑÑıÑĐ¾Đ¸9:.
*******
Senior Member
7,516 posts

Joined: Jun 2005
From: Petaling Jaya


user posted image

14.516 - -vip3rleon9- - E6750 @ 3.60GHz, 450 x8 / Gigabyte P35C-DS3R / 2x1GB Crucial Ballistix Tracer PC6400 DDRII-900 / Intel Factory Heatsink

tongue.gif still planning to push further. laugh.gif
leslie0880
post Sep 2 2007, 10:20 PM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



walao! all P35chipset MB can OC very high FSB for the proc......
make me flow saliva....................
tone
post Sep 2 2007, 10:31 PM

Getting Started
**
Junior Member
231 posts

Joined: Sep 2004


QUOTE(-vip3rleon9- @ Sep 2 2007, 10:12 AM)
user posted image

14.516 - -vip3rleon9- - E6750 @ 3.60GHz, 450 x8 / Gigabyte P35C-DS3R / 2x1GB Crucial Ballistix Tracer PC6400 DDRII-900 / Intel Factory Heatsink

tongue.gif still planning to push further. laugh.gif
*
wat voltage bro? me same proc using abit p35-e
intune
post Sep 3 2007, 12:53 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



Bro Tampoi pls update my results.. icon_rolleyes.gif

intune - Q6600@3.73GHz, 415 x9 / Biostar TForce 965PT (ol Skool) / 2GB DDRII-830, 5-6-6-18 / Xigmatek S1283 /

[attachmentid=288644]

notworthy.gif
alexwsk
post Sep 4 2007, 12:05 AM

Look at all my stars!!
*******
Senior Member
4,094 posts

Joined: Jan 2003
From: USJ


First time trying,

15.562 - alexwsk - E6400@3.60GHz, 450x8 / Abit IP35-E / 2x1GB Crucial Tenth Anniversary DDR2-1080, 4-4-3-8@2.5V / Intel Factory Heatsink

Attached Image

This post has been edited by alexwsk: Sep 4 2007, 12:07 AM
kiong
post Sep 4 2007, 02:27 AM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


Q6600@3.78GHz, 420*9 / Asus P5K-Premium / 2x1GB Crucial Tenth Anniversary DDR2-1008, 4-4-4-9@2.55V / Xigmatek-S1283

little updated... until pek chek ald~~~ 4Ghz really not easy man...


Attached thumbnail(s)
Attached Image
remysix
post Sep 4 2007, 07:22 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


@alexwsk & kiong
why did u guy run ur ram wif that kind of voltage...2.5 - 2.55v; kinda high i think.
alexwsk
post Sep 4 2007, 10:37 AM

Look at all my stars!!
*******
Senior Member
4,094 posts

Joined: Jan 2003
From: USJ


QUOTE(remysix @ Sep 4 2007, 07:22 AM)
@alexwsk & kiong
why did u guy run ur ram wif that kind of voltage...2.5 - 2.55v; kinda high i think.
*
hehe, just for benchmark only la

normally i run it at 2.2V
remysix
post Sep 4 2007, 10:41 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(alexwsk @ Sep 4 2007, 10:37 AM)
hehe, just for benchmark only la

normally i run it at 2.2V
*
even for benchmark, i dun think u need those kind of high vdimm. i think the crucial can still take it.
i have the similar ram, so i know la a bit the capability. biggrin.gif
alexwsk
post Sep 4 2007, 10:42 AM

Look at all my stars!!
*******
Senior Member
4,094 posts

Joined: Jan 2003
From: USJ


QUOTE(remysix @ Sep 4 2007, 10:41 AM)
even for benchmark, i dun think u need those kind of high vdimm. i think the crucial can still take it.
i have the similar ram, so i know la a bit the capability. biggrin.gif
*
hehe, have fan blowing on it, so no problem

the default voltage is 2.3V though
kiong
post Sep 4 2007, 10:47 AM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


u try run @ 1T .... my stick cant post with 2.4 1000mhz with 1T le...
simcheking
post Sep 4 2007, 11:04 AM

New Member
*
Junior Member
12 posts

Joined: Jul 2007
From: Sarawak


QUOTE(kiong @ Sep 4 2007, 02:27 AM)
Q6600@3.78GHz, 420*9 / Asus P5K-Premium / 2x1GB Crucial Tenth Anniversary DDR2-1008, 4-4-4-9@2.55V / Xigmatek-S1283

little updated... until pek chek ald~~~ 4Ghz really not easy man...
*
how to save and post the pic like this?
can anyone teching and PM me please...
thanks.......
toughnut
post Sep 4 2007, 12:13 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
bro, update my stats. cant hold myself back while watching others pumping voltage to their cpu laugh.gif

Here my stats:
intel E6600ES B0
426*9 = 3834MHz
vCORE= 1.75V sweat.gif
actual= 1.712V

HSF: Xigmatek HDT-S1283 Push Pull Config

2GB Crucial Ballistix Tracer DDR800
426MHz 4-4-4-4
vDIMM= 2.1V

Gigabyte P35-DS3P rev1.0 (BIOS F5)
vMCH= +0.3V
vFSB= +0.3V

Super1M 13.562s tongue.gif
Attached Image

edit for typing error blush.gif

This post has been edited by toughnut: Sep 4 2007, 12:13 PM
remysix
post Sep 4 2007, 02:40 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(kiong @ Sep 4 2007, 10:47 AM)
u try run @ 1T .... my stick cant post with 2.4 1000mhz with 1T le...
*
ic...u were running the ram at 1T...
hmm.gif wonder why u want to run it at 1T on intel's. does has any effect on ur SPI timing?


Added on September 4, 2007, 3:20 pmhas anyone tried a Q6600 G0 'B' rev? wonder how it's perfom...

This post has been edited by remysix: Sep 4 2007, 03:20 PM
intune
post Sep 4 2007, 06:25 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(remysix @ Sep 4 2007, 02:40 PM)
ic...u were running the ram at 1T...
hmm.gif wonder why u want to run it at 1T on intel's. does has any effect on ur SPI timing?


Added on September 4, 2007, 3:20 pmhas anyone tried a Q6600 G0 'B' rev? wonder how it's perfom...
*
what u mean G0 rev.b? im using G0 Stepping B.. is that it?


-vip3rleon9-
post Sep 4 2007, 06:40 PM

.:νιÏÑÑıÑĐ¾Đ¸9:.
*******
Senior Member
7,516 posts

Joined: Jun 2005
From: Petaling Jaya


QUOTE(tone @ Sep 2 2007, 10:31 PM)
wat voltage bro? me same proc using abit p35-e
*

1.4v, didn't really up that much. tongue.gif how high you manged to push your proc? planning to get it to around 3.8ghz this weekend.. tongue.gif
remysix
post Sep 4 2007, 07:37 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(intune @ Sep 4 2007, 06:25 PM)
what u mean G0 rev.b? im using G0 Stepping B.. is that it?
*
sorry, my statement is a bit confusing...what i'm trying to ask is actually for Q6600 G0, anyone use the LxxBxx...that B. most of the G0 i've came across is the 'A' batch - well i didnt came across too many G0 actually tongue.gif
since last time for C2D, the 'B' batch performs better than the 'A' in terms of the voltage, wonder if the 'B' batch for G0 is the same.
just wondering.
tycheah_7
post Sep 5 2007, 11:48 AM

Enthusiast
*****
Senior Member
795 posts

Joined: Jan 2003
im confused to get E6850 or Q6600. I want to know what temps would Q6600 run at when OC to 3.0Ghz on stock HSF?
intothefantasy
post Sep 5 2007, 11:58 AM

Regular
******
Senior Member
1,561 posts

Joined: Feb 2006
From: Penang island
well i think with the new G0 stepping with 3.0 OC the temp should be acceptable too...anyway look at this link if u guys were confuese

http://www.xbitlabs.com/articles/cpu/displ...quad-q6600.html
intune
post Sep 5 2007, 12:42 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(tycheah_7 @ Sep 5 2007, 11:48 AM)
im confused to get E6850 or Q6600. I want to know what temps would Q6600 run at when OC to 3.0Ghz on stock HSF?
*
My temp Q6600@3Ghz almost same as stock!

rclxms.gif

This post has been edited by intune: Sep 5 2007, 12:49 PM
tone
post Sep 6 2007, 02:31 AM

Getting Started
**
Junior Member
231 posts

Joined: Sep 2004


QUOTE(-vip3rleon9- @ Sep 4 2007, 06:40 PM)
1.4v, didn't really up that much. tongue.gif how high you manged to push your proc? planning to get it to around 3.8ghz this weekend.. tongue.gif
*
max by this mobo (ip35-e) 470fsb only. cry.gif .proc..3760mhz .proc still can go biggrin.gif
kiong
post Sep 6 2007, 07:57 AM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


QUOTE(remysix @ Sep 4 2007, 02:40 PM)
ic...u were running the ram at 1T...
hmm.gif wonder why u want to run it at 1T on intel's. does has any effect on ur SPI timing?


Added on September 4, 2007, 3:20 pmhas anyone tried a Q6600 G0 'B' rev? wonder how it's perfom...
*
try it... on my rig... superpi 1m 0.3/0.4 sec faster....
-vip3rleon9-
post Sep 6 2007, 03:45 PM

.:νιÏÑÑıÑĐ¾Đ¸9:.
*******
Senior Member
7,516 posts

Joined: Jun 2005
From: Petaling Jaya


QUOTE(tone @ Sep 6 2007, 02:31 AM)
max by this mobo (ip35-e) 470fsb only. cry.gif .proc..3760mhz .proc still can go  biggrin.gif
*

proc will definitely go somemore.. tongue.gif they have now gotten it to >4ghz. i'm only wishing. this weekend is all i need to find out if my setup can run faster.. tongue.gif
SlayerXT
post Sep 6 2007, 09:30 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



QUOTE(tone @ Sep 6 2007, 02:31 AM)
max by this mobo (ip35-e) 470fsb only. cry.gif .proc..3760mhz .proc still can go  biggrin.gif
*
Have u max out all the voltage where appropriate?
intune
post Sep 6 2007, 10:43 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(kiong @ Sep 6 2007, 07:57 AM)
try it... on my rig... superpi 1m 0.3/0.4 sec faster....
*
Confirm then B rev is better then A.. ..anyways where did u get it..cos when in went to lowyat few weeks back there only got the A rev. hmm.gif

Anyways.. pls update my latest Results Bro Tampoi! notworthy.gif

intune - 3.81GHz, 422 x9 / Biostar TForce 965PT / 2GB DDRII-844, 6.0-6-6-18 / Xigmatek S1283

[attachmentid=290507]

rclxms.gif

This post has been edited by intune: Sep 7 2007, 01:46 AM
tone
post Sep 7 2007, 03:53 AM

Getting Started
**
Junior Member
231 posts

Joined: Sep 2004


QUOTE(§layerXT @ Sep 6 2007, 09:30 PM)
Have u max out all the voltage where appropriate?
*
havent yet.
just ich + one notch & mch + one notch.
going to overclock the board again next week as my chipset waterblock is arriving rclxms.gif

we will see..
kmarc
post Sep 7 2007, 02:38 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(intune @ Sep 6 2007, 10:43 PM)
intune - 3.81GHz, 422 x9 / Biostar TForce 965PT / 2GB DDRII-844, 6.0-6-6-18 / Xigmatek S1283

Why is your DDR2 running at such loose timings? hmm.gif
intune
post Sep 7 2007, 06:32 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(kmarc @ Sep 7 2007, 02:38 PM)
Why is your DDR2 running at such loose timings?  hmm.gif
*
Vdroop very bad on this mobo..can only do it at 2.2V but vdroop 2.11 and this oc done on my Team Value Rams.. tried high timing but not stable.. sad.gif
SlayerXT
post Sep 8 2007, 02:05 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Is it worth to loose timing badly than high oc? It should be perfect combo if u can maintain 3.6GHz and 800MHz DDR2 with 44412
intune
post Sep 8 2007, 09:24 AM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(§layerXT @ Sep 8 2007, 02:05 AM)
Is it worth to loose timing badly than high oc? It should be perfect combo if u can maintain 3.6GHz and 800MHz DDR2 with 44412
*
from experience the high oc will compensate for the loose timing..nevertheless a better timing from a good ram is better..but as uve seen its not the case.. but running anhything above 3.5GHz on a Quad is already a screamer on any benchmark and for daily use.
remysix
post Sep 8 2007, 10:31 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(intune @ Sep 8 2007, 09:24 AM)
from experience the high oc will compensate for the loose timing..nevertheless a better timing from a good ram is better..but as uve seen its not the case.. but running anhything above 3.5GHz on a Quad is already a screamer on any benchmark and for daily use.
*
that's u got urself the team value only but a good proc to compensate what the ram is lacking...nice strategy rclxms.gif
intune
post Sep 8 2007, 01:18 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(remysix @ Sep 8 2007, 10:31 AM)
that's u got urself the team value only but a good proc to compensate what the ram is lacking...nice strategy rclxms.gif
*
I think this Team value ram quiet good but need high Vdimm to go stable. My old Biostar 965PT can only go 2.2V VDimm but due to vdroop can only do 2.11 sad.gif

I think if i do the pencil mod to increase VDimm maybe can go higher with better timing ..but if got $$ for sure go for D9GMH rams.. blush.gif


AceCombat
post Sep 8 2007, 10:07 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


intune,

make it 2.3vdimm (so vrop to 2.2) and tighten ur timing to 5-6-5-15 and it can prime stable. rclxms.gif

This post has been edited by AceCombat: Sep 8 2007, 10:10 PM
intune
post Sep 8 2007, 10:40 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(AceCombat @ Sep 8 2007, 10:07 PM)
intune,

make it 2.3vdimm (so vrop to 2.2) and tighten ur timing to 5-6-5-15 and it can prime stable. rclxms.gif
*
thnks for tip bro.. will do it once i pencil mod my vdimm on mobo.
gengstapo
post Sep 9 2007, 11:49 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
nothing better to do currently, just havin' a fun laugh.gif laugh.gif




Attached thumbnail(s)
Attached Image
siauann
post Sep 9 2007, 03:29 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


been sooooooooooooooooooooooooooooooooooooo long dint visit here already. V3 now. lots of C2D owner now. hehe.
btw i wanna ask something here.. how does C2D performs on the new P35 compare with the old P965...the new P35 can runs on DDR3 and Sata3 rite? hmm.gif

This post has been edited by siauann: Sep 9 2007, 03:31 PM
SlayerXT
post Sep 9 2007, 03:42 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



So long, welcome back. C2D on P35 now have gone a lot better especially with new G0 stepping which now can go even 4GHz on air.
siauann
post Sep 9 2007, 06:22 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(§layerXT @ Sep 9 2007, 03:42 PM)
So long, welcome back. C2D on P35 now have gone a lot better especially with new G0 stepping which now can go even 4GHz on air.
*
G0 applies to the new C2D proc?
kmarc
post Sep 9 2007, 06:32 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(siauann @ Sep 9 2007, 06:22 PM)
G0 applies to the new C2D proc?
*
All the new E6x50 series are G0 steppings. However, the best new G0 stepping seems to be the Q6600.... smile.gif
gengstapo
post Sep 9 2007, 10:47 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
does any1 here experience sudden restart pc when opening CoreTemp?

wonder what is the cause?

ps: went to the coolest website & i found core temp 0.95 has alot issues(buggy)

This post has been edited by gengstapo: Sep 9 2007, 10:49 PM
irangan
post Sep 9 2007, 11:39 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(gengstapo @ Sep 9 2007, 10:47 PM)
does any1 here experience sudden restart pc when opening CoreTemp?

wonder what is the cause?

ps: went to the coolest website & i found core temp 0.95 has alot issues(buggy)
*
its clashed with our windows. do happen to me last time but after reinstall fresh window, it is solved.
gengstapo
post Sep 9 2007, 11:58 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(irangan @ Sep 9 2007, 11:39 PM)
its clashed with our windows. do happen to me last time but after reinstall fresh window, it is solved.
*
ahh ic.. tot it was my system unstable or hdd corrupted laugh.gif

btw, current latest release was beta 0.95.4, from change log seems pretty better
AceCombat
post Sep 10 2007, 08:57 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


i also kena,when i open the core temp 0.95,no bsod for quad,terus restart,then my C2D pc kena bsod then have to press reset.

P35 chipset rocks,just dont have enought time to tweak it only,exam coming next week,after next week have to mod casing and prepare for LanParty cry.gif
kmarc
post Sep 10 2007, 09:12 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(gengstapo @ Sep 9 2007, 10:47 PM)
does any1 here experience sudden restart pc when opening CoreTemp?

wonder what is the cause?

ps: went to the coolest website & i found core temp 0.95 has alot issues(buggy)
*
Yeah, it is known that 0.95 has some problems, usually causing BSOD or computer restart. Get the 0.95.4 as suggested, much more stable....
gengstapo
post Sep 10 2007, 12:01 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(AceCombat @ Sep 10 2007, 08:57 AM)
i also kena,when i open the core temp 0.95,no bsod for quad,terus restart,then my C2D pc kena bsod then have to press reset.

P35 chipset rocks,just dont have enought time to tweak it only,exam coming next week,after next week have to mod casing and prepare for LanParty cry.gif
*
QUOTE(kmarc @ Sep 10 2007, 09:12 AM)
Yeah, it is known that 0.95 has some problems, usually causing BSOD or computer restart. Get the 0.95.4 as suggested, much more stable....
*
laugh.gif laugh.gif damn, thanks 4 the feedback

now its prove the CT 0.95 hell buggy yeah!

the time i havent discover yet, ive formatted my rig 3 times in 1 hell nite.. i tot my sound card or RAM gonna die soon

huhuu..
SlayerXT
post Sep 10 2007, 01:43 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Thanks guys, it helps me too biggrin.gif
toughnut
post Sep 10 2007, 02:33 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
my experience with Coretemp actually a bit different. yep, it caused instant restart ONLY if i enable EIST, etc. if i disabled all those power saving function in BIOS, it work perfectly.
gengstapo
post Sep 10 2007, 03:45 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(§layerXT @ Sep 10 2007, 01:43 PM)
Thanks guys, it helps me too biggrin.gif
*
what? biggrin.gif


QUOTE(toughnut @ Sep 10 2007, 02:33 PM)
my experience with Coretemp actually a bit different. yep, it caused instant restart ONLY if i enable EIST, etc. if i disabled all those power saving function in BIOS, it work perfectly.
*
izzit? or maybe incompatible with XP coz before that im in Vista, no sudden reboot etc
remysix
post Sep 10 2007, 04:51 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Sep 10 2007, 03:45 PM)
what?  biggrin.gif
izzit? or maybe incompatible with XP coz before that im in Vista, no sudden reboot etc
*
i also have no problem with Vista. but then i've always those unwanted feature in Advance screen; so, not sure what will happen if i enable them.

AceCombat
post Sep 10 2007, 07:22 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


u guys know how to tweak vista ah?
siauann
post Sep 10 2007, 07:35 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(AceCombat @ Sep 10 2007, 08:57 AM)
i also kena,when i open the core temp 0.95,no bsod for quad,terus restart,then my C2D pc kena bsod then have to press reset.

P35 chipset rocks,just dont have enought time to tweak it only,exam coming next week,after next week have to mod casing and prepare for LanParty cry.gif
*
damn...u guys makes me wanna change my P965 to P35 and come back to OC again hmm.gif
intune
post Sep 10 2007, 08:02 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(siauann @ Sep 10 2007, 07:35 PM)
damn...u guys makes me wanna change my P965 to P35 and come back to OC again  hmm.gif
*
non need to change your 965 ..Just upgrade to Quad Q6600 G0.. im sure it will drag you back to OC'in.. laugh.gif
k8118k
post Sep 10 2007, 08:05 PM

Look at all my stars!!
*******
Senior Member
3,658 posts

Joined: Jan 2003



QUOTE(siauann @ Sep 10 2007, 07:35 PM)
damn...u guys makes me wanna change my P965 to P35 and come back to OC again  hmm.gif
*
wat i experience 965 compare with p35

965 chipset more hot than p35

55+- vs 35+_
SanosukeSagara
post Sep 11 2007, 01:34 AM

2008 2008
******
Senior Member
1,193 posts

Joined: Jan 2003
From: Sungai Petani



any suggestion of ram for P35?
SlayerXT
post Sep 11 2007, 01:48 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



No specific ram. If u talk about AMD and Intel platform there may have.
kmarc
post Sep 11 2007, 10:13 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(SanosukeSagara @ Sep 11 2007, 01:34 AM)
any suggestion of ram for P35?
*
Errr.... how about DDR2?? blink.gif
SanosukeSagara
post Sep 11 2007, 02:33 PM

2008 2008
******
Senior Member
1,193 posts

Joined: Jan 2003
From: Sungai Petani



i mean the brand of ram.. and the timing.. smile.gif
kmarc
post Sep 11 2007, 03:05 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(SanosukeSagara @ Sep 11 2007, 02:33 PM)
i mean the brand of ram.. and the timing.. smile.gif
*
Hehe, was just pulling your leg because your question was too general.... icon_rolleyes.gif

It depends on whether you want to OC your rams or not. If you want normal rams for normal usage, then value rams DDR2-667 2x1gb would be enough....

If you want performance rams, then the general advice is go for DDR2-800 2x1gb 4-4-4-12 timings.... However, this is only a general advice, the better way to look for OC rams are those with the following chipsets - micron D9 e.g. D9GKX or D9GMH....

In terms of brand, any well-known ram manufacturers are acceptable e.g. OCZ, corsair, crucial, patriot, etc. Personally, if you ask me, I would go for crucial ballistix rams, they are relatively cheaper for high-performance rams, acceptable quality, and great overclockers!!! smile.gif

This post has been edited by kmarc: Sep 11 2007, 03:07 PM
AceCombat
post Sep 11 2007, 05:21 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


i vote for OCZ!!! rclxm9.gif

anywayCrucial Ballistix and run 1200MHz with CL4 with the right vdimm.
kennji
post Sep 11 2007, 05:51 PM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
QUOTE(AceCombat @ Sep 11 2007, 05:21 PM)
anywayCrucial Ballistix and run 1200MHz with CL4 with the right vdimm.
*
whoa, probably need 2.5v for that! sweat.gif
gengstapo
post Sep 11 2007, 08:30 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(kennji @ Sep 11 2007, 05:51 PM)
whoa, probably need 2.5v for that!  sweat.gif
*
nah, depend on the speed actually

if u running lower than recommended frequency, u can do CL4 rclxms.gif rclxms.gif
DaRkSyThE
post Sep 11 2007, 08:44 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(AceCombat @ Sep 11 2007, 05:21 PM)
i vote for OCZ!!! rclxm9.gif

anywayCrucial Ballistix and run 1200MHz with CL4 with the right vdimm.
*
i think my rams can do that too.

AceCombat
post Sep 11 2007, 09:09 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


yup,cause i also tried that before, 4-4-4-10 with 1200MHz,it is not impossible,u can do that if ur memory and ur mobo is good pair and match.
remysix
post Sep 11 2007, 09:23 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


at what vdimm is that bro...nvr tried that fsb and timing wif my Anny!
maybe can give it a quick spin
siauann
post Sep 11 2007, 10:42 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(intune @ Sep 10 2007, 08:02 PM)
non need to change your 965 ..Just upgrade to Quad Q6600 G0.. im sure it will drag you back to OC'in..  laugh.gif
*
how much is Q6600 nowadays? tongue.gif


QUOTE(k8118k @ Sep 10 2007, 08:05 PM)
wat i experience 965 compare with p35

965 chipset more hot than p35

55+- vs 35+_
*
so much differences?? unbelievable.. hmm.gif
gengstapo
post Sep 11 2007, 11:04 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(siauann @ Sep 11 2007, 10:42 PM)
how much is Q6600 nowadays?  tongue.gif
so much differences?? unbelievable.. hmm.gif
*
q66 OEM around 6++
retailed at 9++.. brows.gif

p965 vs p35 temperature are believe able smile.gif
siauann
post Sep 12 2007, 10:42 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(gengstapo @ Sep 11 2007, 11:04 PM)
q66 OEM around 6++
retailed at 9++.. brows.gif

p965 vs p35 temperature are believe able smile.gif
*
whats the differences between oem and retails? where can i get oem? 6++ is cheap! blink.gif
gengstapo
post Sep 13 2007, 12:11 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(siauann @ Sep 12 2007, 10:42 PM)
whats the differences between oem and retails? where can i get oem? 6++ is cheap!  blink.gif
*
diff. between OEM & Retail u dunno?? doh.gif doh.gif

OEM mostly replacement parts for branded pc such Dell, HP etc. they only comes with chips

Retail the complete set which been sell at comp. store. they comes with boxed & standard HSf

icon_rolleyes.gif smile.gif
irenic
post Sep 13 2007, 12:58 AM

extr3me n3wbie
*******
Senior Member
7,338 posts

Joined: Jan 2003
From: Cybercity of Cyberjaya


QUOTE(gengstapo @ Sep 13 2007, 12:11 AM)
diff. between OEM & Retail u dunno??  doh.gif  doh.gif

OEM mostly replacement parts for branded pc such Dell, HP etc. they only comes with chips

Retail the complete set which been sell at comp. store. they comes with boxed & standard HSf

icon_rolleyes.gif  smile.gif
*
and standard intel 3 years warranty..


while OEM warranty is depends on the company itself.. but normally they'll give u 1 year warranty with chance to extend the warranty with some extra charge..
AceCombat
post Sep 13 2007, 08:22 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


i thought OEM only 3 months warranty?

anyway,tried with my Anny (the person i love also call Anny sweat.gif) at extreme 2.6vdimm and it can do 4-4-4-10 1200MHz,compared to coolice koko his ballistix only need 2.55 while doing the same setting,so these handpicked chipset got a little bit doubt.... hmm.gif

anyway,yes,P965 is hotter a lot,my P35 only 30c. rclxms.gif
irangan
post Sep 13 2007, 12:10 PM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(AceCombat @ Sep 13 2007, 08:22 AM)
i thought OEM only 3 months warranty?

anyway,tried with my Anny (the person i love also call Anny sweat.gif) at extreme 2.6vdimm and it can do 4-4-4-10 1200MHz,compared to coolice koko his ballistix only need 2.55 while doing the same setting,so these handpicked chipset got a little bit doubt.... hmm.gif

anyway,yes,P965 is hotter a lot,my P35 only 30c. rclxms.gif
*
OEM warranty much depends on the company that distribute it. Some give 3 months, some give 1 year but most of it DOA Warranty only.

Anyway, it is not a fair comparision between coolice PC8000 Ballistix and your anny (gay name smile.gif). Hehe.. Though anny is a handpicked D9GMH ram but its using much higher bin timing than PC8000. e.g. PC8000 using 2.0ns bin and PC8500 using 1.8ns(1.86ns to be exact) bin. The reasoning is the lower the bin timing the better the ram will clock especially at high clock like DDR2 1200 above.
irenic
post Sep 13 2007, 12:27 PM

extr3me n3wbie
*******
Senior Member
7,338 posts

Joined: Jan 2003
From: Cybercity of Cyberjaya


QUOTE(AceCombat @ Sep 13 2007, 08:22 AM)
i thought OEM only 3 months warranty?

anyway,tried with my Anny (the person i love also call Anny sweat.gif) at extreme 2.6vdimm and it can do 4-4-4-10 1200MHz,compared to coolice koko his ballistix only need 2.55 while doing the same setting,so these handpicked chipset got a little bit doubt.... hmm.gif

anyway,yes,P965 is hotter a lot,my P35 only 30c. rclxms.gif
*
act OEM is not meant to be sold to us directly.. however some online retailer / shop @ oversea does sells this OEM stuffs and provide less than 90 days warranty..

but the real world OEM is the one that Intel sells to its partner, like Dell, acer, HP, etc..

and these companies, provide their own warranty to their customer which is normally 1 year.. smile.gif
SlayerXT
post Sep 13 2007, 04:16 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



No one to do OEM Q6600 in Bulk order? drool.gif
siauann
post Sep 13 2007, 05:57 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(gengstapo @ Sep 13 2007, 12:11 AM)
diff. between OEM & Retail u dunno??  doh.gif  doh.gif

OEM mostly replacement parts for branded pc such Dell, HP etc. they only comes with chips

Retail the complete set which been sell at comp. store. they comes with boxed & standard HSf

icon_rolleyes.gif  smile.gif
*
i know what is retails just that not so sure how OEM is..thanks for explaining..can tell me where i can get OEM Q6600?

QUOTE(§layerXT @ Sep 13 2007, 04:16 PM)
No one to do OEM Q6600 in Bulk order? drool.gif
*
yeah...was thinking the same things too! biggrin.gif
kucingfight
post Sep 13 2007, 06:00 PM

Look at all my stars!!
Group Icon
Elite
5,784 posts

Joined: Jan 2003
From: Shah Alam



QUOTE(siauann @ Sep 13 2007, 05:57 PM)
i know what is retails just that not so sure how OEM is..thanks for explaining..can tell me where i can get OEM Q6600?
yeah...was thinking the same things too!  biggrin.gif
*
Rlhh used to have some..but jual like hot sardine breads.
siauann
post Sep 13 2007, 06:16 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(kucingfight @ Sep 13 2007, 06:00 PM)
Rlhh used to have some..but jual like hot sardine breads.
*
'owh...too bad..regret so long dint log in here sad.gif

btw guys..E6600 or E6550 better? the FSB affect the performance a lot? which one more oc-able?
E6550 is G0 stepping?
ahsiah
post Sep 13 2007, 07:48 PM

Asus ROG Fan
*****
Senior Member
875 posts

Joined: Oct 2004
From: Selayang, Selangor


E6550 is G0 stepping.

However, E6550 only got up to 7 multiplier and E6600 got 9 multiplier. E6550 required good overclockable RAM that push higher FSB to achieve higher Ghz.
AceCombat
post Sep 13 2007, 08:26 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


yup,correct,like bro ahsiah said,and i prefer E6600 because the multiplier is adjustable from 6x to 9x so that it offers more oc performance la.
davidletterboyz
post Sep 13 2007, 09:27 PM

Der Kaiser
*******
Senior Member
4,672 posts

Joined: Jan 2003


I'm making a comeback from a (short tongue.gif ) retirement hehe....here is some small OC with my LOBO rig:
Intel Pentium E2140 (8x402) @ 1.45V (1.40V BIOS)
Crucial value ram 2x1GB 4-4-4-8-20 DDR2-1000 2.35V
ABIT AW9D-MAX mobo
Attached Image
BTW, I'm using stock HSF in air-cond room. biggrin.gif





sHawTY
post Sep 13 2007, 09:34 PM

Frequent Reporter
********
All Stars
14,909 posts

Joined: Jul 2005

QUOTE(davidletterboyz @ Sep 13 2007, 09:27 PM)
in air-cond room. biggrin.gif
Pawned! laugh.gif

gmail
post Sep 13 2007, 10:00 PM

Trolling Level
*******
Senior Member
2,597 posts

Joined: Mar 2005
From: Kuala Lumpur


QUOTE(siauann @ Sep 13 2007, 06:16 PM)
'owh...too bad..regret so long dint log in here  sad.gif

btw guys..E6600 or E6550 better? the FSB affect the performance a lot? which one more oc-able?
E6550 is G0 stepping?
*
E6600 if u want to overclock, the 9x multiplier will makes your life easier.

E6750 (G0) also not bad, few of my friend breaking 4GHz with some D9GMH.
coolice
post Sep 13 2007, 10:36 PM

Team OCD!
******
Senior Member
1,857 posts

Joined: Sep 2004
From: ocdrift.com


QUOTE(gmail @ Sep 13 2007, 10:00 PM)
E6600 if u want to overclock, the 9x multiplier will makes your life easier.

E6750 (G0) also not bad, few of my friend breaking 4GHz with some D9GMH.
*
curious abt the mobo and batch code,mind to tell? biggrin.gif
gengstapo
post Sep 13 2007, 10:40 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(gmail @ Sep 13 2007, 10:00 PM)
E6600 if u want to overclock, the 9x multiplier will makes your life easier.

E6750 (G0) also not bad, few of my friend breaking 4GHz with some D9GMH.
*
hahaa.. ya, if ask me between e6600 & e6550, my answer was e6750! its rock.. rclxms.gif
SlayerXT
post Sep 14 2007, 02:13 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



Hoho gengstapo u also think like that kah? I am also think that the FSB1333 strap help it overclock more than E6600 even it got 8x multiplier. I still got trouble priming my E6600 at 3.6GHz(400x9 @ 1.50v) on my ab9 quadgt. I might think E6750 should be no problem at this speed though.
gengstapo
post Sep 14 2007, 08:33 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(§layerXT @ Sep 14 2007, 02:13 AM)
Hoho gengstapo u also think like that kah? I am also think that the FSB1333 strap help it overclock more than E6600 even it got 8x multiplier. I still got trouble priming my E6600 at 3.6GHz(400x9 @ 1.50v) on my ab9 quadgt. I might think E6750 should be no problem at this speed though.
*
well well.. since the e6750 FSB strap at 1333Mhz, it might advantage into overclocking since mostly e6750 here able to clock higher than e6600.

u trying to prime e6600@ 400x9 arr? gud luck then, coz lastime i failed to prime mine.. almost catching nuts doh.gif wacko.gif
AceCombat
post Sep 14 2007, 03:04 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


but the temp,the G0 now got new core temp to read the real temp reading....

is it as hot as E6600 like last time?

G0 user,what is ur temp in non-air cond room idle at 3.2GHz with stock hsf?
siauann
post Sep 14 2007, 06:16 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


thanks for all the feedback..seems like E6750 2.66ghz 1333fsb is a better choice..
erm..1 question..does my P965-DS3 supports fsb up to 1333?? sweat.gif
AceCombat
post Sep 14 2007, 07:07 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


yup,if u r rev 1.0,just update ur bios and if u r the rev 2.0 and rev 3.3, yes,u can just cucuk and main.
cstkl1
post Sep 14 2007, 07:09 PM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

dude with the choice changing ure fsb strap on the p35 instead of auto on p965p i dont makes a difference e6600 vs e6*50
it only takes of the limits on the rams
hmm makes u wonder with certain x38 and x48 having a 1600 fsb strap....

This post has been edited by cstkl1: Sep 14 2007, 07:10 PM
SlayerXT
post Sep 14 2007, 09:43 PM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



@siauann, just update ur BIOS and it should works. thumbup.gif
gmail
post Sep 14 2007, 09:47 PM

Trolling Level
*******
Senior Member
2,597 posts

Joined: Mar 2005
From: Kuala Lumpur


QUOTE(coolice @ Sep 13 2007, 10:36 PM)
curious abt the mobo and batch code,mind to tell? biggrin.gif
*
batch code not sure.

mobo Gigabyte P35 DQ6
SlayerXT
post Sep 15 2007, 03:01 AM

PRIDE!
*******
Senior Member
2,042 posts

Joined: Jan 2003
From: KL



QUOTE(gengstapo @ Sep 14 2007, 08:33 AM)
well well.. since the e6750 FSB strap at 1333Mhz, it might advantage into overclocking since mostly e6750 here able to clock higher than e6600.

u trying to prime e6600@ 400x9 arr? gud luck then, coz lastime i failed to prime mine.. almost catching nuts  doh.gif  wacko.gif
*
It seems that kinda mistake to buy the E66...recently, try to play any trick to get it stable at 3.6GHz flex.gif
gengstapo
post Sep 15 2007, 11:58 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(§layerXT @ Sep 15 2007, 03:01 AM)
It seems that kinda mistake to buy the E66...recently, try to play any trick to get it stable at 3.6GHz flex.gif
*
ohh ya, got friend of mine here able to prime his e6600 at 3.8Ghz if not mistaken thumbup.gif thumbup.gif
but the voltage used bit higher laa, around 1.525V if not mistaken icon_rolleyes.gif
siauann
post Sep 16 2007, 01:52 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


very hard to get E6600 prime stable @ 3.6Ghz? (400x9) sweat.gif
something i wanna ask here...E6600 ES and the retails whats the difference beside the multiplier..any others? not applicable to warranty and package.. tongue.gif in terms of oc-able, temp, stability...
AceCombat
post Sep 16 2007, 02:02 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


mostly same,dont worry.

what is the vcore u using?if it's not stable,it might be ur ram,try to increase vcore or vdimm a bit by a bit.
siauann
post Sep 16 2007, 02:06 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(AceCombat @ Sep 16 2007, 02:02 PM)
mostly same,dont worry.

what is the vcore u using?if it's not stable,it might be ur ram,try to increase vcore or vdimm a bit by a bit.
*
hehe...wait i get my hand on the E6600 ES 1st and return to OC again.. tongue.gif
goldfries
post Sep 16 2007, 06:56 PM

40K Club
Group Icon
Forum Admin
44,415 posts

Joined: Jan 2003




Welcome to Core 2 Duo/Quad thread. Enjoy your stay and we hope you will get your best overclocks with the help of our fellow Lowyatians smile.gif

Include a screenie and specify your motherboard, processor, memory and cooling used...


remember guys and gals, this is NOT a discussion thread.

Anyway here's mine again

Setup
Processor : Intel Pentium E2140
Motherboard : Biostar TForce TP35D2-A7
RAM : Kingston Value RAM DDR2 667 1GB x2
Heatsink : Xigmatek HDT-S963

OCing Details
OCed speed : 3.33ghz (8x417mhz)
RAM Timing : 4-4-4-12
FSB:RAM Ratio : 1:1 (RAM at 417 mhz)
SuperPI : 18.391s

This post has been edited by goldfries: Sep 16 2007, 07:01 PM


Attached thumbnail(s)
Attached Image
davidletterboyz
post Sep 16 2007, 07:59 PM

Der Kaiser
*******
Senior Member
4,672 posts

Joined: Jan 2003


Hehe a little bit of competition is good. Luckily I still have a few scores in bag...so, here is another one to lower the bar tongue.gif

Setup
Processor : Intel Pentium E2140
Motherboard : Abit AW9D-MAX
RAM : Crucial Value RAM DDR2 667 1GB x2
Heatsink : Intel Stock HSF in air cond room

OCing Details
OCed speed : 3.23ghz (8x404mhz)
RAM Timing : 4-4-4-6
RAM speed: DDR2-1010
SuperPI : 18.360s
Attached Image

This post has been edited by davidletterboyz: Sep 16 2007, 08:05 PM
gengstapo
post Sep 16 2007, 08:32 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
q66 can be paired nicely with p965 board.. rclxms.gif rclxm9.gif

user posted image
KahLooN
post Sep 16 2007, 09:54 PM

~(^^)~
*****
Senior Member
704 posts

Joined: Jan 2003
From: Cheras


Im not sure whether is appropiate to ask a question about overclocking an e6550. Im confuse about the processor multiplier as im playing with my bro pc, i have change the Power Option to "Always On". In addition, i aslo change the the cpu ratio option and set it x7 but the "Intel Speed Step" option is gone. So i assume the SpeedStep is been disable.

Once i go into windows, the cpuz will detect the multiplier at x6 instead of x7 but windows showing the real speed. Here are some of the screenies with the following specs:

Intel e6550
Asus p5k-se (latest bios)
x2600xt

Or i need to change any other options? smile.gif


Attached thumbnail(s)
Attached Image Attached Image Attached Image
kmarc
post Sep 16 2007, 10:07 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



Disable C1E and EIST also... smile.gif
idevonz
post Sep 19 2007, 04:00 PM

Regular
******
Senior Member
1,290 posts

Joined: Mar 2006
From: Shah Alam



hey guys.. need help here..
im newbie in oc.. btw this is my system

user posted image
as u can see.. the temp1 = 56c
which intel's Maximum Recommended Fan Inlet Temperature (°C) = 38c

can help me reduce it? im planning to do mild oc soon icon_question.gif
kmarc
post Sep 19 2007, 04:26 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(idevonz @ Sep 19 2007, 04:00 PM)
hey guys.. need help here..
im newbie in oc.. btw this is my system

which intel's Maximum Recommended Fan Inlet Temperature (°C) = 38c

can help me reduce it? im planning to do mild oc soon icon_question.gif
*
That's probably your mobo's temperature, either the southbridge or the northbridge, depending on what mobo you are using.

What mobo are you using? Does it come with a temperature monitoring program. You can use that to correlate the temperature readings to speedfan's reading.....

The temp2 shows your CPU temp. However, remember that the E6750 core temperature is still inaccurate (unresolved issue). You can use core temp 0.95.4 to measure the core temperature. Other temperature monitoring programs will show a core temp which is about 15'c lower.....

This post has been edited by kmarc: Sep 19 2007, 04:27 PM
idevonz
post Sep 19 2007, 06:27 PM

Regular
******
Senior Member
1,290 posts

Joined: Mar 2006
From: Shah Alam



thanks for ur reply smile.gif
im using the same mobo as urs.. p-35-ds3
temperature monitoring program eh? i dunno which 1 is it the i-cool or easytune? rclxub.gif
oh ya im using the stock hsf

This post has been edited by idevonz: Sep 19 2007, 06:28 PM
kmarc
post Sep 19 2007, 06:38 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(idevonz @ Sep 19 2007, 06:27 PM)
thanks for ur reply smile.gif
im using the same mobo as urs.. p-35-ds3
temperature monitoring program eh? i dunno which 1 is it the i-cool or easytune? rclxub.gif
oh ya im using the stock hsf
*
Then you can use the Easytune5 to look at the CPU temp and the system temp. You will find that the CPU temp = temp2 and the system temp = temp1.

Again, there is the issue of which app is giving the correct temp for the E6750. Look at this thread for further info: http://forum.lowyat.net/topic/496060

For me, I'm relying on the Easytune5 CPU temp.... smile.gif

P.S. Don't use i-cool, as from my experience, if you're not careful, the CPU fan can sometimes stop spinning totally!!!
gtghost
post Sep 22 2007, 03:17 AM

Casual
***
Junior Member
495 posts

Joined: Jan 2003
Lazy to close all programs to run super PI, so I just run it normally.

Setup
Processor : Intel Pentium E6550
Motherboard : Gigabyte P35-DS3
RAM : 1GB Kingston Value RAM DDR2 533Mhz x 2
Heatsink : Zalman CNPS9700 (forgot the damn model)

Current
OCed speed : 3.48ghz (7x497mhz) @ 1.3v default vcore
RAM Timing : 4-4-4-10
FSB:RAM Ratio : 1:1 (RAM at 994 mhz)
SuperPI : 15.016s

Highest
OCed speed : 3.8ghz (7x545mhz) @ 1.45v
RAM Timing : 5-5-5-15
FSB:RAM Ratio : 1:1 (RAM at 1090 mhz)
SuperPI : 13.512s

TYPO

Overwritten my picture on the 3.8Ghz so I just take the highest record on the superPI. I believe the chip can hit 3.9-4Ghz with air-cond cause all this setup is on air and in enclosed casing. This is a kick-ass mobo. No problems with 545Mhz bus speed. Sorry to say i have some bad experience with the Asus last time , vdroop to terrible. This one i did not measure the vdroop, maybe some pros here can do a test.

This post has been edited by gtghost: Sep 22 2007, 03:25 AM


Attached thumbnail(s)
Attached Image Attached Image
intune
post Sep 23 2007, 10:56 AM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



I want a new P35 OC mobo to replace my Biostar 965PT..any recomendations? Currently doing 3.6Ghz daily on my Quad.


gengstapo
post Sep 23 2007, 11:18 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
hurmm.. wat vcore dya feed to ur quaddy bro? interested to know tongue.gif

btw, what if u try DFI Infinity P35 T2RL Blood Iron board? brows.gif
intune
post Sep 23 2007, 09:22 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(gengstapo @ Sep 23 2007, 11:18 AM)
hurmm.. wat vcore dya feed to ur quaddy bro? interested to know tongue.gif

btw, what if u try DFI Infinity P35 T2RL Blood Iron board? brows.gif
*
im feeding 1.35V Vcore (Bios) Daily at 3.6Ghz on my Quad G0 .. Super Stable pass Orthos & Prime 8 Hours. Tho it says 1.328V on Cpu-Z.


Added on September 23, 2007, 9:24 pm
QUOTE(intune @ Sep 23 2007, 09:22 PM)
im feeding 1.35V Vcore (Bios) Daily at 3.6Ghz on my Quad G0 .. Super Stable pass Orthos & Prime 8 Hours. Tho it says 1.328V on Cpu-Z.
*
Will the DFI Infinity P35 T2RL be full proof for Yorkfield or shud I go for X38/48 instead? hmm.gif

This post has been edited by intune: Sep 23 2007, 09:24 PM
gengstapo
post Sep 23 2007, 09:36 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
nice ehh, onli need 1.35V to stable at 3.6Ghz

wonderful q6600 u got there brows.gif
zeustronic
post Sep 23 2007, 11:19 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


user posted image

Q6600 2.4 Ghz@ 3.78Ghz
P5K Premium mobo
A-Data 1GB DDR2 800 x4
SuperPI @ 13.515
Cooler Master Gemin II

lol wait too long for P5K Deluxe waste abit & get the Premium. Shiat was a waste!

This post has been edited by zeustronic: Sep 23 2007, 11:33 PM
gtghost
post Sep 24 2007, 04:28 AM

Casual
***
Junior Member
495 posts

Joined: Jan 2003
Zues u need to get some kick-ass ram. What's with the a-data?
zeustronic
post Sep 24 2007, 08:03 AM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(gtghost @ Sep 24 2007, 05:28 AM)
Zues u need to get some kick-ass ram. What's with the a-data?
*
haha.. dude u should google more for A-Data. Refer back to 1st page the A-Data is quite overclockable @1038Mhz under E6600 section, for the moment i not yet tweak the ram, this my 1st trial all the way up gimme a break

This post has been edited by zeustronic: Sep 24 2007, 08:12 AM
remysix
post Sep 24 2007, 11:20 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(zeustronic @ Sep 24 2007, 08:03 AM)
haha.. dude u should google more for A-Data. Refer back to 1st page the A-Data is quite overclockable @1038Mhz under E6600 section, for the moment i not yet tweak the ram, this my 1st trial all the way up gimme a break
*
and not to mentioned that u r running at 4x1Gb sticks...so, 1038fsb is surely great edi. rclxms.gif
toughnut
post Sep 24 2007, 12:02 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
yup. 4 stick of ram running stablily at 1000fsb+ is a good run already.

a-data also produce high performance ram but i never bother to check the chip they are using though
intune
post Sep 24 2007, 12:29 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(toughnut @ Sep 24 2007, 12:02 PM)
yup. 4 stick of ram running stablily at 1000fsb+ is a good run already.

a-data also produce high performance ram but i never bother to check the chip they are using though
*
http://ramlist.ath.cx/ddr2/

to check a-data chipset used.
zeustronic
post Sep 24 2007, 05:12 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(intune @ Sep 24 2007, 01:29 PM)
http://ramlist.ath.cx/ddr2/

to check a-data chipset used.
*
Majority is Elpida chips, I oso got DDR400 oso using Elpida. If got chance i gonna switch D9.
siauann
post Sep 24 2007, 07:16 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


just install the E6600 ES i bought...surprise me!! running on stock check the temp!! shocking.gif

user posted image

what can be wrong? im using hyper48 hsf wink.gif

not yet OC!! doh.gif

This post has been edited by siauann: Sep 24 2007, 07:16 PM
intune
post Sep 24 2007, 08:02 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(siauann @ Sep 24 2007, 07:16 PM)
just install the E6600 ES i bought...surprise me!! running on stock check the temp!!  shocking.gif

user posted image

what can be wrong? im using hyper48 hsf  wink.gif

not yet OC!!  doh.gif
*
..try Coretemp or your motherboard temp utility that comes with your mobo for accurate reading for your ES.


gengstapo
post Sep 24 2007, 08:05 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(siauann @ Sep 24 2007, 07:16 PM)
just install the E6600 ES i bought...surprise me!! running on stock check the temp!!  shocking.gif

[img]
what can be wrong? im using hyper48 hsf  wink.gif

not yet OC!!  doh.gif
*
thats normal la br0.. lol

ES e6600 full buggy yeah.. touch the hsf, its aint warm i think
siauann
post Sep 24 2007, 08:24 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(intune @ Sep 24 2007, 08:02 PM)
..try Coretemp or your motherboard temp utility that comes with your mobo for accurate reading for your ES.
*
QUOTE(gengstapo @ Sep 24 2007, 08:05 PM)
thats normal la br0.. lol

ES e6600 full buggy yeah.. touch the hsf, its aint warm i think
*
owh..thanks for the feedback..i cheack in bios is only 4XºC..so that means its normal? scared me.. wink.gif
yehlai
post Sep 24 2007, 10:10 PM

tree lover
*******
Senior Member
4,539 posts

Joined: Feb 2006
From: LocOmoT|oN.L0co|oti0N


QUOTE(siauann @ Sep 24 2007, 08:24 PM)
owh..thanks for the feedback..i cheack in bios is only 4XºC..so that means its normal? scared me.. wink.gif
*
Dont worry bro, dont need to run any TAT or Coretemp if u r using ES laugh.gif
Those software also will cause multiplier drop as well.
zeustronic
post Sep 24 2007, 11:38 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


@siauann
Hyper 48 is little weak, chances getting higher clock maybe thin. Consider to get better cooler.

Here my 2nd round OC:
user posted image
siauann
post Sep 25 2007, 12:44 AM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(yehlai @ Sep 24 2007, 10:10 PM)
Dont worry bro, dont need to run any TAT or Coretemp if u r using ES  laugh.gif
Those software also will cause multiplier drop as well.
*
haha..then how to measure the temp? no need measure? blush.gif

@bro zeustronic..i was thinking of changing my hyper48 to big typhoonVX.. smile.gif
intune
post Sep 25 2007, 01:30 AM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(siauann @ Sep 25 2007, 12:44 AM)
haha..then how to measure the temp? no need measure?  blush.gif

@bro zeustronic..i was thinking of changing my hyper48 to big typhoonVX.. smile.gif
*
Get the Xigmatek S1283..
remysix
post Sep 25 2007, 07:32 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(intune @ Sep 25 2007, 01:30 AM)
Get the Xigmatek S1283..
*
yup...get the xigmatek s1283...i think i have one lying around here somewhere tongue.gif used it for 2 weeks and my WC arrived...
ops...sorry for the cheap ads notworthy.gif


toughnut
post Sep 25 2007, 08:48 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
@siauann

lol. my E6600ES around 8xC idle. IDLE LOL.

but when check via mobo monitoring software, only 42C lol

now with xigmatek s1283, idling 32c thumbup.gif
remysix
post Sep 25 2007, 08:58 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


i wonder whay u wanna use the ES one. i mean for a E66...if for QX67 or QX6850 ok la...but for E66, wouldnt it be better to get the final code one?
siauann
post Sep 25 2007, 04:46 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


QUOTE(toughnut @ Sep 25 2007, 08:48 AM)
@siauann

lol. my E6600ES around 8xC idle. IDLE LOL.

but when check via mobo monitoring software, only 42C lol

now with xigmatek s1283, idling 32c thumbup.gif
*
haha..lucky im not the only one encounter this..

QUOTE(remysix @ Sep 25 2007, 08:58 AM)
i wonder whay u wanna use the ES one. i mean for a E66...if for QX67 or QX6850 ok la...but for E66, wouldnt it be better to get the final code one?
*
its cheap..cant effort Quad sad.gif
zeustronic
post Sep 25 2007, 10:27 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


u wan something tall up Xigmatek simple & cool, u wanna Pimp it bling bling LED get Gemin II haha...
gengstapo
post Sep 25 2007, 10:38 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
eh guys, how to use memtest dos version arr?

install to floppy & let it boot so it run automatically arr?

is that enough just let it run automatically??

how long should it run?

This post has been edited by gengstapo: Sep 25 2007, 10:38 PM
remysix
post Sep 25 2007, 10:54 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Sep 25 2007, 10:38 PM)
eh guys, how to use memtest dos version arr?

install to floppy & let it boot so it run automatically arr?

is that enough just let it run automatically??

how long should it run?
*
write the image to the floppy or cd...then boot directly from the floppy/cd...once u got the screen, hit 'c' IIRC, then '1' then '3' then '5' or '7' or '8'...normally people use test #5...i like to call it Mambo No. 5 tongue.gif ...run it for about 8 hours...or whichever suits u...
why, got a new pair ka bro???
AceCombat
post Sep 25 2007, 11:34 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


what software can stress all 4 cores at the same time?
DaRkSyThE
post Sep 25 2007, 11:38 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(AceCombat @ Sep 25 2007, 11:34 PM)
what software can stress all 4 cores at the same time?
*
quad prime smile.gif
thats what the people over at XS use
gengstapo
post Sep 25 2007, 11:38 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(AceCombat @ Sep 25 2007, 11:34 PM)
what software can stress all 4 cores at the same time?
*
i use Prime95 sweat.gif

run blend test at least 8hrs errorless
remysix
post Sep 26 2007, 01:09 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(DaRkSyThE @ Sep 25 2007, 11:38 PM)
quad prime smile.gif
thats what the people over at XS use
*
this one...http://files.extremeoverclocking.com/file.php?f=103
even OCCT can stress the 4 cores just fine
rlhc17
post Sep 26 2007, 01:31 AM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



i use OCCT fast n reliable only need 30mins


cstkl1
post Sep 26 2007, 01:36 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

QUOTE(rlhc17 @ Sep 26 2007, 01:31 AM)
i use OCCT fast n reliable only need 30mins
*
yup and second part u forgot u can make it to monitor ure vcore via speedfan..

when the stress fails.. check ure vcore for the appropriate adjustment...

i think this is the main selling point
AceCombat
post Sep 26 2007, 09:20 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


ya,i tried OCCT before,it works well and it utilize 4 cores,much more better than orthos.

before my rig kena stolen,i donwclock my rif to 2.4GHz (same setting as Q6600) and i only use 1.1vcore to run occt,it can be lowered a bit but i have no luck to do that.
gengstapo
post Sep 26 2007, 11:30 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(remysix @ Sep 25 2007, 10:54 PM)
write the image to the floppy or cd...then boot directly from the floppy/cd...once u got the screen, hit 'c' IIRC, then '1' then '3' then '5' or '7' or '8'...normally people use test #5...i like to call it Mambo No. 5 tongue.gif ...run it for about 8 hours...or whichever suits u...
why, got a new pair ka bro???
*
yaww my fRend
ive done running my memtest test #5 11hrs, no error even single! smile.gif
hehehee..

again, does it really enuff running OCCT at default setting? i mean does it really t0ok only 30min to determine the overcloked rig stable?

This post has been edited by gengstapo: Sep 26 2007, 12:33 PM
remysix
post Sep 26 2007, 10:09 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(gengstapo @ Sep 26 2007, 11:30 AM)
yaww my fRend
ive done running my memtest test #5 11hrs, no error even single! smile.gif
hehehee..

again, does it really enuff running OCCT at default setting? i mean does it really t0ok only 30min to determine the overcloked rig stable?
*
great to hear that but then again u r back to square one. really need to change the mobo i think.
the 30 minutes test shud only be used if u want to find out how high ur proc can go...if u passed, then up a bit more till u got the 'Crashed' notice. then back-up a bit and run the Infinite test for at least 12 hours. then u might say that u proc is stable at that speed.
gengstapo
post Sep 26 2007, 10:39 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(remysix @ Sep 26 2007, 10:09 PM)
great to hear that but then again u r back to square one. really need to change the mobo i think.
the 30 minutes test shud only be used if u want to find out how high ur proc can go...if u passed, then up a bit more till u got the 'Crashed' notice. then back-up a bit and run the Infinite test for at least 12 hours. then u might say that u proc is stable at that speed.
*
ahh ic ic.. tot running OCCT for 30min already enuff
if its need to run at longer time, its just same as prime95

ohh well, luckily ive runnin' prime95 this evenin' & its gone 5hrs oledi
estimate time until 1a.m then it finish 8hrs++, hope no error laa.. rclxm9.gif
AceCombat
post Sep 26 2007, 11:34 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


OCCT full throttle for 30 minutes i think is more than enough right?
remysix
post Sep 26 2007, 11:37 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(AceCombat @ Sep 26 2007, 11:34 PM)
OCCT full throttle for 30 minutes i think is more than enough right?
*
this 30 minutes, 8 hours, 12 hours is really up to you actually...whichever u have confidence with. i used to run the OCCT full blast for 17 hours, then all the sudden crashed...maybe due to some heatwave or something...so shud i consider mine is stable or not? hmm.gif
AceCombat
post Sep 26 2007, 11:46 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


u think u will run ur pc 24/7 100% load?no right?
so consider stable la.

last time my quad downclock to 2.4GHz and run at 1.1vcore only and OCCt stable.
gengstapo
post Sep 26 2007, 11:58 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(remysix @ Sep 26 2007, 11:37 PM)
this 30 minutes, 8 hours, 12 hours is really up to you actually...whichever u have confidence with. i used to run the OCCT full blast for 17 hours, then all the sudden crashed...maybe due to some heatwave or something...so shud i consider mine is stable or not? hmm.gif
*
i think this shall consider stable oredi

full throttle at 17hrs is crazy man, it sure caused by heat at ur chipset
rlhc17
post Sep 28 2007, 12:43 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



My new mobo Abit IP35-Pro w/ Q6600

quick test 500fsb x8 = 4ghz


Attached thumbnail(s)
Attached Image
sup3rfly
post Sep 28 2007, 01:47 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


QUOTE(remysix @ Sep 26 2007, 11:37 PM)
this 30 minutes, 8 hours, 12 hours is really up to you actually...whichever u have confidence with. i used to run the OCCT full blast for 17 hours, then all the sudden crashed...maybe due to some heatwave or something...so shud i consider mine is stable or not? hmm.gif
*
for myself i will Orthos for 8 hrs pri 3... i think its sufficient already.... 8hrs of non stop 100% load is more than enough...u wont be using ur computer at full load for 8 hrs right? smile.gif
reason i choose pri 3 is because pri 4 will start to make ur pc lag then i cant use it but pri 3 is just fine icon_idea.gif

invisiblelim
post Sep 28 2007, 06:54 PM

Regular
******
Senior Member
1,263 posts

Joined: Aug 2005


erm, can any PRO out there, teach me how to OC my RIG? i just got my Q6600 today ^.^
I mean, if propabaly, status some of your setting.. thank you
remysix
post Sep 28 2007, 07:36 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(sup3rfly @ Sep 28 2007, 01:47 PM)
for myself i will Orthos for 8 hrs pri 3... i think its sufficient already.... 8hrs of non stop 100% load is more than enough...u wont be using ur computer at full load for 8 hrs right? smile.gif
reason i choose pri 3 is because pri 4 will start to make ur pc lag then i cant use it but pri 3 is just fine  icon_idea.gif
*
this is what i meant...it based on how confident are u with the stress test...for some 30 minutes enuff, some 4 hours, some 8 hours and some 24hrs...
for me...12hrs tongue.gif

QUOTE(invisiblelim @ Sep 28 2007, 06:54 PM)
erm, can any PRO out there, teach me how to OC my RIG? i just got my Q6600 today ^.^
I mean, if propabaly, status some of your setting.. thank you
*
what a nice setup u have there...maybe those having ASUS mobo can help out but most important is for you to search around...not only at LYN but other forums as well...u need to find the sweet spot for ur mobo...i think the 1st post might help u to find out where to start with.
zeustronic
post Sep 29 2007, 11:30 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


Round 3 Atempt, 1more try & the last tongue.gif

user posted image
gengstapo
post Sep 30 2007, 01:11 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(rlhc17 @ Sep 28 2007, 12:43 PM)
My new mobo Abit IP35-Pro w/ Q6600

quick test 500fsb x8 = 4ghz
hey bro, does it b0ot direct from BIOS or OC via windows?
rlhc17
post Sep 30 2007, 02:38 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



QUOTE(gengstapo @ Sep 30 2007, 01:11 PM)
hey bro, does it b0ot direct from BIOS or OC via windows?
*
direct boot from bios bro.......
i don't like OC using software via windows
AceCombat
post Sep 30 2007, 06:07 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


QUOTE(invisiblelim @ Sep 28 2007, 06:54 PM)
erm, can any PRO out there, teach me how to OC my RIG? i just got my Q6600 today ^.^
I mean, if propabaly, status some of your setting.. thank you
*
nice rig uhave there,especially ur CF,i like it.

anyway,u m,ay try 450x8 with 1.45vcore,i tried with my friend setup on DS3 and it boot successfully,it's G0 btw.
kmarc
post Sep 30 2007, 06:50 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(zeustronic @ Sep 29 2007, 11:30 PM)
Round 3 Atempt, 1more try & the last tongue.gif
Nice OC. Must be very high vcore! What's your vcore and core temperature? hmm.gif

remysix
post Sep 30 2007, 07:17 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


QUOTE(kmarc @ Sep 30 2007, 06:50 PM)
Nice OC. Must be very high vcore! What's your vcore and core temperature?  hmm.gif
*
my guess would be 1.55v...dropped and then drooped to 1.496 biggrin.gif

This post has been edited by remysix: Sep 30 2007, 07:27 PM
zeustronic
post Oct 1 2007, 07:36 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(remysix @ Sep 30 2007, 08:17 PM)
my guess would be 1.55v...dropped and then drooped to 1.496  biggrin.gif
*
1.525V, actually... i don straight away pump voltage, i slowly add some if there not enough power to boot windows. 3.96Ghz @1.6v danger zone is near don dare push anymore.

This post has been edited by zeustronic: Oct 1 2007, 07:40 PM
kiong
post Oct 2 2007, 01:25 AM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


updated... blush.gif TS contact me when u get back...


Attached thumbnail(s)
Attached Image
AceCombat
post Oct 2 2007, 10:25 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


not bad kiong,
try to lower down the vcore and try to get as low vcore as u can.

maybe u can try 450*9
Hyde`fK
post Oct 2 2007, 11:19 AM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



Eh kiong, download CPU-Z 1.41 ler, that can see vcore.
AceCombat
post Oct 2 2007, 07:10 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


but bro hyde,not really accurate leh....

better to stick with the mobo utility.
Hyde`fK
post Oct 2 2007, 09:17 PM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



It's quite actually. Use SpeedFan also can.
sup3rfly
post Oct 2 2007, 09:27 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


for software based vcore measurement i find the most accurate is cpuz ones... i mean the new version.... best is use DMM tho smile.gif
zeustronic
post Oct 2 2007, 11:09 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(AceCombat @ Oct 2 2007, 11:25 AM)
not bad kiong,
try to lower down the vcore and try to get as low vcore as u can.

maybe u can try 450*9
*
u cant get any lower 450*9 at least 1.6v++....
kiong
post Oct 2 2007, 11:42 PM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


cant go any further ald... this new porc at limit ald...
remysix
post Oct 3 2007, 05:41 AM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


this week i noticed something weird about my system...OCCT ok for 8hrs at 3.6G@1.45v...but sometime when i just let the system be at idle...torrenting or nothing, it will just BSOD...dunno why...is it due to the power instability? btw, i'm only using 4-pin of the +12v to the mobo...not 8 pins coz don have the extension to make it longer to reach from below to the top of the casing...will it be the cause?what do u think?

This post has been edited by remysix: Oct 3 2007, 05:41 AM
zeustronic
post Oct 3 2007, 01:16 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(kiong @ Oct 3 2007, 12:42 AM)
cant go any further ald... this new porc at limit ald...
*
lol... 445*9 boot up then windows failed d... 3.96Ghz max cry.gif cry.gif ...

This post has been edited by zeustronic: Oct 3 2007, 01:18 PM


Attached thumbnail(s)
Attached Image
kiong
post Oct 3 2007, 01:31 PM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


QUOTE(zeustronic @ Oct 3 2007, 01:16 PM)
lol... 445*9 boot up then windows failed d... 3.96Ghz max cry.gif  cry.gif ...
*
lol same here.... i wan change cpu!! icon_idea.gif
zeustronic
post Oct 3 2007, 02:40 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(kiong @ Oct 3 2007, 02:31 PM)
lol same here.... i wan change cpu!! icon_idea.gif
*
U think CPU??? or maybe mobo?? i not going change anything d... this is my last attempt.

This post has been edited by zeustronic: Oct 3 2007, 02:41 PM
kiong
post Oct 3 2007, 05:30 PM

Getting Started
**
Junior Member
103 posts

Joined: Mar 2005
From: kuching/miri


yes... cause last 2 week i was using FPO:L723, tat batch very hard to stable @ 3.6ghz, this is L724, can stable @ 3.6ghz Vcore 1.475 prime 10 hour ok...
siauann
post Oct 3 2007, 07:51 PM

Music-Movies-Coffee
*******
Senior Member
3,375 posts

Joined: May 2005
From: MeeRee


erm...can i know whats the default vcore for E6600? i doesnt clocks well when i set to 1.25Vcore unsure.gif
sup3rfly
post Oct 3 2007, 08:05 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


QUOTE(kiong @ Oct 3 2007, 05:30 PM)
yes... cause last 2 week i was using FPO:L723, tat batch very hard to stable @ 3.6ghz, this is L724, can stable @ 3.6ghz Vcore 1.475 prime 10 hour ok...
*
izzit L724B or L724A?
zeustronic
post Oct 3 2007, 09:17 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(kiong @ Oct 3 2007, 06:30 PM)
yes... cause last 2 week i was using FPO:L723, tat batch very hard to stable @ 3.6ghz, this is L724, can stable @ 3.6ghz Vcore 1.475 prime 10 hour ok...
*
I using L723B 3.6Ghz stable@1.45v, I gaming 6-7hours straight so far no hanged not restarted. I tried to prime 2night see how.
irangan
post Oct 4 2007, 12:57 AM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


QUOTE(siauann @ Oct 3 2007, 07:51 PM)
erm...can i know whats the default vcore for E6600? i doesnt clocks well when i set to 1.25Vcore unsure.gif
*
Most of the E6600 is either 1.325 or 1.35. You can check this using Coretemp... The VID Reading is ur default proc vcore.
gengstapo
post Oct 4 2007, 12:59 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(siauann @ Oct 3 2007, 07:51 PM)
erm...can i know whats the default vcore for E6600? i doesnt clocks well when i set to 1.25Vcore unsure.gif
*
try top-up step by step bro

should be around 1.35v for e6600 smile.gif
syazone
post Oct 9 2007, 05:30 PM

Regular
******
Senior Member
1,413 posts

Joined: Nov 2004
From: KL



1st attempt

E6300 @ 2.33Ghz, 1.25v (on 965P DS3)
sigh, i cant increase FSB anymore... FSB 340, it wont boot up cry.gif .... izzit bcoz of my ram? (mushkin ValueRam sad.gif )

user posted image
AceCombat
post Oct 9 2007, 06:25 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


fsb more wont boot?
have u increase some vcore before boot it?
kennji
post Oct 9 2007, 06:31 PM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
or is it because of the 1T command rate?
syazone
post Oct 9 2007, 06:40 PM

Regular
******
Senior Member
1,413 posts

Joined: Nov 2004
From: KL



QUOTE(AceCombat @ Oct 9 2007, 06:25 PM)
fsb more wont boot?
have u increase some vcore before boot it?
*
yes... i've increase it back to 1.325 (default vcore)

QUOTE(kennji @ Oct 9 2007, 06:31 PM)
or is it because of the 1T command rate?
*
this command rate can be change? i cant cant any option about this command rate at my mobo
(refer my sig)
AceCombat
post Oct 9 2007, 07:16 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


pls do the ali baba magic by pressing CTRL+F1 button at the bios screen there.
change to 2T.

and maybe ur proc need a bit vcore,make it to 1.35vcore.
syazone
post Oct 9 2007, 08:43 PM

Regular
******
Senior Member
1,413 posts

Joined: Nov 2004
From: KL



yeah... but which one to change CR? wink.gif
user posted image
icon_question.gif
remysix
post Oct 9 2007, 09:48 PM

Hardcore Leecher!!!
******
Senior Member
1,311 posts

Joined: Jan 2003
From: Puchong/Deep Beach


i dun think there is option to change the CR in the bios...r u sure it is the ram coz the ram is rated at DDR2 667 and u r running it at 667...wont boot means what...after u changed the fsb, save n exit, nothing happened or it just keep on cycling on and off?as mentioned by ace, have u tried up the vcore a bit... i mean higher than the default?
syazone
post Oct 9 2007, 10:51 PM

Regular
******
Senior Member
1,413 posts

Joined: Nov 2004
From: KL



just tried to increase vMCH +0.1v & vcore 3.5 & 3.525... can boot but fail prime test cry.gif



This post has been edited by syazone: Oct 9 2007, 11:05 PM
gengstapo
post Oct 10 2007, 01:18 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(syazone @ Oct 9 2007, 10:51 PM)
just tried to increase vMCH +0.1v & vcore 3.5 & 3.525... can boot but fail prime test  cry.gif
*
err what ur setting with this?

btw, how come vcore 3.5? typo izzit? tongue.gif
Hyde`fK
post Oct 10 2007, 02:25 AM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



1.35v and 1.3525v eh. 3.5v would already blow up, that is if you even set such vcore.
syazone
post Oct 10 2007, 05:14 AM

Regular
******
Senior Member
1,413 posts

Joined: Nov 2004
From: KL



typo2.... sorry... its 1.35 & 1.325... sorri laugh.gif
DaRkSyThE
post Oct 10 2007, 11:36 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



user posted image

smile.gif
zeustronic
post Oct 11 2007, 12:07 AM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


drool.gif drool.gif drool.gif WoW! How much u pay for that mobo??
cstkl1
post Oct 11 2007, 12:54 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

must have cost a bomb
RokXIII
post Oct 11 2007, 12:56 AM

C'est la vie, Chérie
******
Senior Member
1,634 posts

Joined: Mar 2006
From: Ipoh @ Puchong


OMG, Formula Maximus!!! shocking.gif
cstkl1
post Oct 11 2007, 01:35 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

hmm looking at the time of post kekek looks like somekind of underground deal...kekeke


Added on October 11, 2007, 1:38 am
QUOTE(syazone @ Oct 9 2007, 05:30 PM)
1st attempt

E6300 @ 2.33Ghz, 1.25v (on 965P DS3)
sigh, i cant increase FSB anymore... FSB 340, it wont boot up cry.gif .... izzit bcoz of my ram? (mushkin ValueRam sad.gif )


*
hmm temps??

not suppose to operate higher than 62

This post has been edited by cstkl1: Oct 11 2007, 04:03 AM
DaRkSyThE
post Oct 11 2007, 01:51 AM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



a fellow foumer here (that fellow above me) is my main man smile.gif
RokXIII
post Oct 11 2007, 01:56 AM

C'est la vie, Chérie
******
Senior Member
1,634 posts

Joined: Mar 2006
From: Ipoh @ Puchong


QUOTE(cstkl1 @ Oct 11 2007, 01:35 AM)
hmm looking at the time of post kekek looks like somekind of underground deal...kekeke


Added on October 11, 2007, 1:38 am

hmm temps??

not suppose to operate higher than 62
*
I think the temperature is ok, as for E6300, B2 stepping normally is hotter than the L2 stepping.
correct if i'm wrong. smile.gif
cstkl1
post Oct 11 2007, 04:04 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

QUOTE(RokXIII @ Oct 11 2007, 01:56 AM)
I think the temperature is ok, as for E6300, B2 stepping normally is hotter than the L2 stepping.
correct if i'm wrong. smile.gif
*
that wasnt the point...

he is at the limit for ...

G0 limit is 72 btw
syazone
post Oct 11 2007, 01:38 PM

Regular
******
Senior Member
1,413 posts

Joined: Nov 2004
From: KL



QUOTE(cstkl1 @ Oct 11 2007, 01:35 AM)
hmm looking at the time of post kekek looks like somekind of underground deal...kekeke


Added on October 11, 2007, 1:38 am

hmm temps??

not suppose to operate higher than 62
*
QUOTE(RokXIII @ Oct 11 2007, 01:56 AM)
I think the temperature is ok, as for E6300, B2 stepping normally is hotter than the L2 stepping.
correct if i'm wrong. smile.gif
*
QUOTE(cstkl1 @ Oct 11 2007, 04:04 AM)
that wasnt the point...

he is at the limit for ...

G0 limit is 72 btw
*
mean... its bcoz of my temp? BTW idle is around 50-52
AceCombat
post Oct 11 2007, 06:59 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


i think it around rm1180 like that for that maximus,anyway,i dotn like water cooling,not plan to go to the mobo.

is it P35?or it's X38?
gengstapo
post Oct 11 2007, 07:57 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
asus maximus formula using x38 chipset smile.gif
gmail
post Oct 12 2007, 12:50 AM

Trolling Level
*******
Senior Member
2,597 posts

Joined: Mar 2005
From: Kuala Lumpur


QUOTE(DaRkSyThE @ Oct 10 2007, 11:36 PM)
» Click to show Spoiler - click again to hide... «


smile.gif
*
show us some result drool.gif
gengstapo
post Oct 12 2007, 10:53 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(gmail @ Oct 12 2007, 12:50 AM)
show us some result  drool.gif
*
hehehe.. me also eager to know, how far x38 can outperforme p35? smile.gif
AceCombat
post Oct 12 2007, 08:57 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


i think p35 is still better than X38

just like P965 better than 975x.
DaRkSyThE
post Oct 12 2007, 09:46 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(AceCombat @ Oct 12 2007, 08:57 PM)
i think p35 is still better than X38

just like P965 better than 975x.
*
hoho thats where you are wrong my friend
on the P35 my max for FSB was around 500 (due to the proc)
now im at 520mhz smile.gif with tighter timings too
on the sandra bandwidth, i got better read/write scores smile.gif

unless u are saying in terms of value, the X38 is a better board
bare in mind that this is still initial tests with the inmature bios as compared the the P35s with mature bios smile.gif
AceCombat
post Oct 13 2007, 12:45 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


wah....really ah bro darksythe?

but i remembered the T2R can hit 6xxMhz FSB with P35 right?

but after u use liao,what's da difference between X38 and P35?
baok
post Oct 13 2007, 12:52 AM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005


erm... P35 vs X38.. who will win?? wink.gif

if you compare 965 and 975, yes 965 can go at much higher fsb.. but if at clock to clock.. let say 380fsb, the 975 is faster... but then.. who is satisfied at below 500fsb?? tongue.gif

but for me.. overclock means to get the most out of ordinary..

DS3R rocks biggrin.gif
toughnut
post Oct 13 2007, 10:24 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
QUOTE(AceCombat @ Oct 13 2007, 12:45 AM)
wah....really ah bro darksythe?

but i remembered the T2R can hit 6xxMhz FSB with P35 right?

but after u use liao,what's da difference between X38 and P35?
*
AFAIK, highest FSB depend on proc too. FSB wall. 520FSB might not be the highest FSB X38 can go but DaRkSyThE's proc.

anyway, DaRkSyThE, no photos to share? keeping to yourself? tongue.gif
DaRkSyThE
post Oct 13 2007, 07:44 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(toughnut @ Oct 13 2007, 10:24 AM)
AFAIK, highest FSB depend on proc too. FSB wall. 520FSB might not be the highest FSB X38 can go but DaRkSyThE's proc.

anyway, DaRkSyThE, no photos to share? keeping to yourself? tongue.gif
*
wait i thought u had one too smile.gif
correct me if im wrong but one of the three boards went to you tongue.gif

wait. im still testing the board. maxed out at 530 FSB on air so far
preping my WC now biggrin.gif
baok
post Oct 13 2007, 08:32 PM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005


QUOTE(DaRkSyThE @ Oct 13 2007, 07:44 PM)
wait i thought u had one too smile.gif
correct me if im wrong but one of the three boards went to you tongue.gif

wait. im still testing the board. maxed out at 530 FSB on air so far
preping my WC now biggrin.gif
*
wow.. what proc dya use?? E6x50 i assume?? cant wait for some screenie tongue.gif
DaRkSyThE
post Oct 13 2007, 08:33 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(baok @ Oct 13 2007, 08:32 PM)
wow.. what proc dya use?? E6x50 i assume?? cant wait for some screenie tongue.gif
*
nope
my good old X6800 Extreme smile.gif
i was super surprised when i got 530fsb actually.
this proc was suppose to max out at 480 on air ><
AceCombat
post Oct 14 2007, 10:24 AM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


every mobo not the same,i not suprise when i see 530fsb,bro darksythe,it can go further.
smokey
post Oct 14 2007, 10:37 AM

Infinity speed
*******
Senior Member
3,506 posts

Joined: Jan 2003
From: Lumpur
my e4400 at 3.15GHz (350*9) so far...

user posted image

This post has been edited by smokey: Oct 14 2007, 10:37 AM
Hoodlums
post Oct 14 2007, 10:50 AM

On my way
****
Senior Member
598 posts

Joined: Sep 2004



My C2D E4400 @ 385Mhz x 8 biggrin.gif
user posted image
Using GigaByte GA-i35P-DS3 icon_rolleyes.gif

This post has been edited by Hoodlums: Oct 14 2007, 10:52 AM
smokey
post Oct 14 2007, 10:52 AM

Infinity speed
*******
Senior Member
3,506 posts

Joined: Jan 2003
From: Lumpur
QUOTE(Hoodlums @ Oct 14 2007, 10:50 AM)
user posted image

Using GigaByte GA-i35P-DS3  icon_rolleyes.gif
*
ur gt up ur vcore? 1.376v..
Hoodlums
post Oct 14 2007, 11:07 AM

On my way
****
Senior Member
598 posts

Joined: Sep 2004



My C2D E4400 @ 356Mhz x 9 biggrin.gif
user posted image
cool.gif
smokey
post Oct 14 2007, 11:22 AM

Infinity speed
*******
Senior Member
3,506 posts

Joined: Jan 2003
From: Lumpur
wah, ur superPI is faster than mine 1 second...
toughnut
post Oct 14 2007, 12:34 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
QUOTE(DaRkSyThE @ Oct 13 2007, 07:44 PM)
wait i thought u had one too smile.gif
correct me if im wrong but one of the three boards went to you tongue.gif

wait. im still testing the board. maxed out at 530 FSB on air so far
preping my WC now biggrin.gif
*
i wish it was mine blush.gif nope, it reserved for another forumer.

if maxi really good, might keep it for myself. but the board price... aiyo doh.gif
DaRkSyThE
post Oct 14 2007, 01:11 PM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(toughnut @ Oct 14 2007, 12:34 PM)
i wish it was mine blush.gif  nope, it reserved for another forumer.

if maxi really good, might keep it for myself. but the board price... aiyo doh.gif
*
at the moment i wudnt say its a fantastic board cause of the immature bios
smokey
post Oct 14 2007, 06:54 PM

Infinity speed
*******
Senior Member
3,506 posts

Joined: Jan 2003
From: Lumpur
latest attempt e4400 @ 3.04GHz (380*8) at stock voltage...

user posted image

the superPI is slower than my 350*9... btw, it cn boot at 400*8 but not stable...

This post has been edited by smokey: Oct 14 2007, 06:57 PM
leslie0880
post Oct 14 2007, 09:35 PM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



Bro Tampoi,Help me Update my new OC result
thank you...... smile.gif

Proc: Intel C2Q Q6600 /w Thermalright Ultra 120 Extreme
MotherBoard: Asus P5K3 Deluxe Wifi AP
RAM: Kingston DDR3 1066 2*1GB

user posted image

This post has been edited by leslie0880: Oct 14 2007, 11:39 PM
DaRkSyThE
post Oct 15 2007, 12:34 AM

Look at all my stars!!
Group Icon
VIP
4,809 posts

Joined: Jan 2005



QUOTE(AceCombat @ Oct 14 2007, 10:24 AM)
every mobo not the same,i not suprise when i see 530fsb,bro darksythe,it can go further.
*
bro. 530mhz for X6800 on air is kinda rare.
i think ure referring to all the new E6X50 procs smile.gif
kmarc
post Oct 15 2007, 06:41 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(leslie0880 @ Oct 14 2007, 09:35 PM)
Bro Tampoi,Help me Update my new OC result
thank you...... smile.gif

Proc: Intel C2Q Q6600 /w Thermalright Ultra 120 Extreme
MotherBoard: Asus P5K3 Deluxe Wifi AP
RAM: Kingston DDR3 1066 2*1GB
Nice OC. What's your vcore?

sup3rfly
post Oct 15 2007, 09:23 AM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


QUOTE(DaRkSyThE @ Oct 15 2007, 12:34 AM)
bro. 530mhz for X6800 on air is kinda rare.
i think ure referring to all the new E6X50 procs smile.gif
*
show me ur multiplier as well i will check if thats a fsb wall if u dun mind smile.gif...doin some investigation on the fsb wall now...some ppl say fsb wall exist....some say it doesnt, what is actually limiting the FSB is the NBCC (northbridge core clock).... so i m checking out on that now hehe

This post has been edited by sup3rfly: Oct 15 2007, 09:37 AM
cstkl1
post Oct 15 2007, 02:36 PM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

QUOTE(sup3rfly @ Oct 15 2007, 09:23 AM)
show me ur multiplier as well i will check if thats a fsb wall if u dun mind smile.gif...doin some investigation on the fsb wall now...some ppl say fsb wall exist....some say it doesnt, what is actually limiting the FSB is the NBCC (northbridge core clock).... so i m checking out on that now hehe
*
hmm u mean the LDT reference coreclock??

so far i tested that theory it doesnt

multi's depending on heat wall..

lower multi... more stress/dependencies on mobo
higher multis ... more stress/dependencies on proc


Added on October 15, 2007, 2:37 pm
QUOTE(sup3rfly @ Oct 15 2007, 09:23 AM)
show me ur multiplier as well i will check if thats a fsb wall if u dun mind smile.gif...doin some investigation on the fsb wall now...some ppl say fsb wall exist....some say it doesnt, what is actually limiting the FSB is the NBCC (northbridge core clock).... so i m checking out on that now hehe
*
hmm u mean the LDT reference coreclock?? ( hmm the prob with this is actually straps as most mobos use this for strap reference)hence instability to overclock this.

so far i tested that theory it doesnt

multi's depending on heat wall..

lower multi... more stress/dependencies on mobo
higher multis ... more stress/dependencies on proc

This post has been edited by cstkl1: Oct 15 2007, 02:37 PM
sup3rfly
post Oct 15 2007, 02:57 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


iinm LDT is used by AMD only...

regarding the NBCC, we will take E6850 (x9) as example

by using 400 x 9 and 450 x 8, this 2 combinations will give u 3.6Ghz proc clock speed but 450 x 8 will have more stress on the n/b.... so when u reached the max of the nbcc then u will hit a fsb wall

NBCC = (default multi/set multi) x FSB

400 x 9
(9/9) x 400 = 400

450 x 8
(9/8) x 450 = 506.25

plz remember to multiply by 4 as intel is quad pump right now smile.gif and do correct me if i m mistaken smile.gif

and what do u mean by heat wall.... if its the heat limitation then i think heat is probably limiting the FSB not the multi smile.gif

this has been proven when we did DI on the same proc....

This post has been edited by sup3rfly: Oct 15 2007, 03:08 PM
0168257061
post Oct 15 2007, 05:59 PM

EimiFukada
********
All Stars
14,242 posts

Joined: Jul 2007
From: JAVABUS


Hey all , i have a question
Why i can't boot into windows when i set the FSB into 380Mhz or above ?
Which factor causes me cant overclock over 380Mhz ?
Btw, im using 8X multiplyer to overclock.
smokey
post Oct 15 2007, 06:44 PM

Infinity speed
*******
Senior Member
3,506 posts

Joined: Jan 2003
From: Lumpur
got up ur vcore?
RokXIII
post Oct 15 2007, 07:00 PM

C'est la vie, Chérie
******
Senior Member
1,634 posts

Joined: Mar 2006
From: Ipoh @ Puchong


QUOTE(168257061 @ Oct 15 2007, 05:59 PM)
Hey all , i have a question
Why i can't boot into windows when i set the FSB into 380Mhz  or above ?
Which factor causes me cant overclock over 380Mhz ?
Btw, im using 8X multiplyer to overclock.
*
try push up vcore...
0168257061
post Oct 15 2007, 09:18 PM

EimiFukada
********
All Stars
14,242 posts

Joined: Jul 2007
From: JAVABUS


Vcore is CPU  voltage ?
I push it to 1.425/1.525/1.6 and 1.8 still cant boot in...is there anything want to add volatage ??


Added on October 15, 2007, 9:39 pmoh..f***....when i push 2.0V for cpu volatage...then i saw CPU 79C then i quickly off the switch...after that...my comp cant open anymore...it will keep restart every 2 seconds....what happen?

This post has been edited by 168257061: Oct 15 2007, 09:39 PM
TStAmp0i
post Oct 15 2007, 10:12 PM

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



What the .... Did you mean 2.0V for Vcore? ohmy.gif You're attempting to fry it... Reset your CMOS and try again this time 2.2V (kidding)
mmohdnor
post Oct 15 2007, 10:18 PM

Regular
******
Senior Member
1,021 posts

Joined: Aug 2006
From: Penang Island, Alor Star


2.0V for vcore ? ... oh god .. soon ur cpu gonna join the 'dark' side ... (e.g burnt!) tongue.gif

This post has been edited by mmohdnor: Oct 15 2007, 10:21 PM
sup3rfly
post Oct 15 2007, 10:28 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


2.0v....dun crazy la...if u are running air cooling highest i would suggest would be 1.65v only...and its not for daily usage or 24/7...ur computer will die in no time >.<||

if u still having the problem i suggest u to remove ur proc for few days and install back with everything @ default and see if ur proc is dead or not... crazy man u air cooling 2.0v >.<||
Hyde`fK
post Oct 15 2007, 10:52 PM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



Wah kao, don't simply push vcore eh. sweat.gif Hope your proc is fine.
zeustronic
post Oct 15 2007, 11:03 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


My hands are shaking freezing oso when my vcore hitting 1.65-1.67, u still hit 2.0 bravo.
irangan
post Oct 16 2007, 12:32 AM

Lost Soul
******
Senior Member
1,201 posts

Joined: Dec 2004
From: Kuala Lumpur


Read and learn more before OC... Ignorance KILLZ~!
leslie0880
post Oct 16 2007, 01:29 AM

Enthusiast
*****
Senior Member
728 posts

Joined: Feb 2005
From: Johor



QUOTE(kmarc @ Oct 15 2007, 06:41 AM)
Nice OC. What's your vcore?
*
erm..... my v core damn high o...... cry.gif
360*9 jus need 1.47 vcore.....but
445*9 need 1.6 vcore .... blink.gif blink.gif sweat.gif sweat.gif shakehead.gif shakehead.gif
really scare my proc and ram die........
if 445*9, ram must run at 1.9-2.0 voltage(8-8-8-24@DDR3 1440).... doh.gif
if normal 333*9 jus run at 1.5 default voltage(7-7-7-20@DDR3 1333) only.... shakehead.gif

and 1 more quetion need ur helps....
y i choose 2T for my ram at bios ,but CPU-Z show 1T? shocking.gif
0168257061
post Oct 16 2007, 04:53 AM

EimiFukada
********
All Stars
14,242 posts

Joined: Jul 2007
From: JAVABUS


lolx....how to resot CMOS? seems like my proc burnt sweat.gif


Added on October 16, 2007, 5:23 amwahahhahahh............i plugged out the battery and can boot again...xD
Later i will put it back...xD
2.0V is funny....excited...because never try it and im noob on voltage control..tongue.gif


Added on October 16, 2007, 5:29 amThank you guy.
ok...my comp can normally boot now...just want to try again using 400Mhz fsb...so far i tried the above stated vcore still can't boot into windows...why ?


This post has been edited by 168257061: Oct 16 2007, 05:29 AM
Hoodlums
post Oct 16 2007, 09:50 AM

On my way
****
Senior Member
598 posts

Joined: Sep 2004



Bro 0168257061, how about FSB Voltage?
Still default?
cstkl1
post Oct 16 2007, 10:01 AM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

QUOTE(sup3rfly @ Oct 15 2007, 02:57 PM)
iinm LDT is used by AMD only...

regarding the NBCC, we will take E6850 (x9) as example

by using 400 x 9 and 450 x 8, this 2 combinations will give u 3.6Ghz proc clock speed but 450 x 8 will have more stress on the n/b.... so when u reached the max of the nbcc then u will hit a fsb wall

NBCC = (default multi/set multi) x FSB

400 x 9
(9/9) x 400 = 400

450 x 8
(9/8) x 450 = 506.25

plz remember to multiply by 4 as intel is quad pump right now smile.gif and do correct me if i m mistaken smile.gif

and what do u mean by heat wall.... if its the heat limitation then i think heat is probably limiting the FSB not the multi  smile.gif

this has been proven when we did DI on the same proc....
*
the term LDT is used by nforce chipsets. i think for intel chipsets is called HT link speed.
it just the bus frequency between the northbridge and southbridge.

the times 4 thingy is just Front side bus speed.
but speed is FSB/4.



This post has been edited by cstkl1: Oct 16 2007, 10:05 AM
0168257061
post Oct 16 2007, 10:05 AM

EimiFukada
********
All Stars
14,242 posts

Joined: Jul 2007
From: JAVABUS


QUOTE(Hoodlums @ Oct 16 2007, 10:50 AM)
Bro 0168257061, how about FSB Voltage?
Still default?
*
yaya....+ how many ? +0.1/2/3 ?

iceman31
post Oct 16 2007, 03:22 PM

Mewtwotwotwotwo
*******
Senior Member
2,631 posts

Joined: Dec 2005
From: Keramat



sry for asking n00b question...

is it e6550 max multiplyer only x7??

hmm if i raise my fsb like 40mhz how many vcore do i need to raise??

and my processor running on 2.8ghz on 47min n max around 55 is dat ok??? or i push higher??

sry kind a n00b questiong...

reli intrested in ocing
0168257061
post Oct 16 2007, 04:51 PM

EimiFukada
********
All Stars
14,242 posts

Joined: Jul 2007
From: JAVABUS


Depend how far you want to go...dont push too much Vcore..dont over 1.5V is ok...yesterday i use 2.0v then my cpu fly up to 79C...sleep.gif...nearly fry it...
gengstapo
post Oct 16 2007, 04:59 PM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(AceCombat @ Oct 11 2007, 06:59 PM)
i think it around rm1180 like that for that maximus,anyway,i dotn like water cooling,not plan to go to the mobo.

is it P35?or it's X38?
*
nope.. its should be lesser tongue.gif

i found it ady rclxm9.gif icon_idea.gif
AceCombat
post Oct 16 2007, 06:14 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


how much u get?
pm me drool.gif
Hyde`fK
post Oct 16 2007, 11:37 PM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



Intel Yorkfield @ 6GHz Foxconn MARS Quantum Force

user posted image

Image taken from VR-Zone.com

Source : http://forums.vr-zone.com/showthread.php?t=195427


Serious stuff.
sukhoi37
post Oct 17 2007, 12:11 AM

Into Computer Since 2002
*******
Senior Member
4,810 posts

Joined: Jan 2003



guys, wanna ask sth here.
any cheap oc board for budget no more than rm400?
planning to get 6550 or 6750 by early of nov.

thanks
Hyde`fK
post Oct 17 2007, 12:22 AM

D9s Killer
*******
Senior Member
2,378 posts

Joined: Jan 2003
From: Miri,Sarawak,Malaysia Status: Dead!



There're a few to choose from.

Gigabyte P35 DS3
Asus P5K SE
Abit IP35-E
Biostar TD35D2-A7

TStAmp0i
post Oct 17 2007, 12:23 AM

The name is Poi
*******
Senior Member
2,825 posts

Joined: Jan 2003
From: Miri



QUOTE(sukhoi37 @ Oct 17 2007, 12:11 AM)
guys, wanna ask sth here.
any cheap oc board for budget no more than rm400?
planning to get 6550 or 6750 by early of nov.

thanks
*
Abit IP35-E for just < RM400. Cheap and rich overclocking menu...

user posted image
Picture courtesy www.soft32.ru

This post has been edited by tAmp0i: Oct 17 2007, 12:24 AM
gengstapo
post Oct 17 2007, 12:56 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(Hyde`fK @ Oct 16 2007, 11:37 PM)
Intel Yorkfield @ 6GHz Foxconn MARS Quantum Force

[img]

Image taken from VR-Zone.com

Source : http://forums.vr-zone.com/showthread.php?t=195427
Serious stuff.
*
holly smoke!! nice clock but no single benchmark, at least PI 1m tongue.gif

still unbelievable..
t3chn0m4nc3r
post Oct 17 2007, 12:18 PM

Teh Necron Lord
*******
Senior Member
4,139 posts

Joined: Sep 2006
From: Internet


QUOTE(gengstapo @ Oct 17 2007, 01:56 AM)
holly smoke!! nice clock but no single benchmark, at least PI 1m tongue.gif

still unbelievable..
*
believe it.... but it was Asus who reached the clock 1st... wif it's new X38... guess Foxconn beat the crap outta Asus... sweat.gif
rlhc17
post Oct 17 2007, 12:45 PM

Enthusiast
*****
Senior Member
835 posts

Joined: Sep 2004
From: LYP@Bintang Walk



QUOTE(tAmp0i @ Oct 17 2007, 12:23 AM)
Abit IP35-E for just < RM400. Cheap and rich overclocking menu...

user posted image
Picture courtesy www.soft32.ru
*
Abit good rclxms.gif easy setup & fast drool.gif
toughnut
post Oct 17 2007, 12:59 PM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
6ghz quad is insane. good for video encoding lol thumbup.gif
coolice
post Oct 17 2007, 02:48 PM

Team OCD!
******
Senior Member
1,857 posts

Joined: Sep 2004
From: ocdrift.com


QUOTE(t3chn0m4nc3r @ Oct 17 2007, 12:18 PM)
believe it.... but it was Asus who reached the clock 1st... wif it's new X38... guess Foxconn beat the crap outta Asus... sweat.gif
*
link pls wink.gif
kerryking
post Oct 17 2007, 09:55 PM

On my way
****
Senior Member
553 posts

Joined: Apr 2006
Shamino stated is benchable at 5+ghz..quite impossible to bench 6ghz..
maybe hes able to bench it at 6ghz in the future who knows..
kick ass chips

This post has been edited by kerryking: Oct 17 2007, 09:56 PM
jackanory
post Oct 18 2007, 12:09 AM

Casual
***
Junior Member
349 posts

Joined: Jul 2006
guys, simple question.. whats the best cooling solution under rm200 to cool a q6600 for running stable 24/7 at 3ghz with ambient temps of around 29-31c.. ? kinda noobish question but i had to ask here to get feedback from ppl close to home.. thx

btw im currently using a freezer 7 pro, just enough to run e6850 at 3.2ghz with those ambient temps. thx again

This post has been edited by jackanory: Oct 18 2007, 12:10 AM
RokXIII
post Oct 18 2007, 04:06 AM

C'est la vie, Chérie
******
Senior Member
1,634 posts

Joined: Mar 2006
From: Ipoh @ Puchong


Testing by push up vcore to 1.45v, vdimm to 2.0v, but not yet test the stability... blush.gif

toughnut
post Oct 18 2007, 08:32 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
QUOTE(jackanory @ Oct 18 2007, 12:09 AM)
guys, simple question.. whats the best cooling solution under rm200 to cool a q6600 for running stable 24/7 at 3ghz with ambient temps of around 29-31c.. ? kinda noobish question but i had to ask here to get feedback from ppl close to home.. thx

btw im currently using a freezer 7 pro, just enough to run e6850 at 3.2ghz with those ambient temps. thx again
*
xigmatek s1283 or cm geminII will be enough. personally i prefer xigmatek though
salimbest83
post Oct 18 2007, 09:50 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang



just wanna asking some sifus here..

an e6750 can OC how high on Ori HSF...
using gigabyte p35 ds3...

enermax 535W
and xpertvision x1950GT 512MB..
here my screenie..just up the fsb only...

try 440x8 cannot complete 3dmark06

all voltage set to auto...

This post has been edited by salimbest83: Oct 18 2007, 10:21 AM


Attached thumbnail(s)
Attached Image
gengstapo
post Oct 18 2007, 10:37 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
QUOTE(salimbest83 @ Oct 18 2007, 09:50 AM)
just wanna asking some sifus here..

an e6750 can OC how high on Ori HSF...
using gigabyte p35 ds3...

enermax 535W
and xpertvision x1950GT 512MB..
here my screenie..just up the fsb only...

try 440x8 cannot complete 3dmark06

all voltage set to auto...
*
cannot like that bro
u have to tweak ur system voltage(s) to make it stable

usually, AUTO voltage(s) mainly for stock speed system
salimbest83
post Oct 18 2007, 04:50 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang



QUOTE(gengstapo @ Oct 18 2007, 10:37 AM)
cannot like that bro
u have to tweak ur system voltage(s) to make it stable

usually, AUTO voltage(s) mainly for stock speed system
*
erm..

at first, i oso think like that..

but its seem that p35 ds3 bios already adjust the voltage for my cpu, rams , and chipsets..

and cpuz state that my cpu running @ 1.39v@3360MHz..
and lastime when i try running @450x8, cpuz shows 1.4v ++..
will double check after back from work...

any other p35 user here?
lets share something..

This post has been edited by salimbest83: Oct 18 2007, 04:54 PM
Hoodlums
post Oct 18 2007, 05:05 PM

On my way
****
Senior Member
598 posts

Joined: Sep 2004



GigaByte GA-i35P-DS3 user here.. rclxms.gif
Hehehe..Auto Voltage also good for OC but i like to manually tweak the voltage..
If my C2D E4400 running @ 3.2Ghz using Auto Voltage, CPU-Z shows 1.39V for Vcore..
Not only VCore but VDIMM also adjusted.. wink.gif
salimbest83
post Oct 18 2007, 05:13 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang



QUOTE(Hoodlums @ Oct 18 2007, 05:05 PM)
GigaByte GA-i35P-DS3 user here.. rclxms.gif
Hehehe..Auto Voltage also good for OC but i like to manually tweak the voltage..
If my C2D E4400 running @ 3.2Ghz using Auto Voltage, CPU-Z shows 1.39V for Vcore..
Not only VCore but VDIMM also adjusted.. wink.gif
*
nice to meet ya..

and
there is so many voltage to adjust..
just dunno which one u need to adjust and which one doesnt..

PS...
and actually i already make my asus x300 half fried when first time OC on this board..
forgot to press ctrl+F1..

the PCie freq was set to auto..
so my x300 already draw lots of artifact /lines/dots when start my pc..poor little card...
GiGabyte should set the pcie freq to 100 by default la..
i think......
Hoodlums
post Oct 18 2007, 05:23 PM

On my way
****
Senior Member
598 posts

Joined: Sep 2004



Bro set manually PCI-E Freq to 100Mhz wink.gif


Added on October 18, 2007, 8:25 pmuser posted image
Hehe 3.42Ghz (342Mhz x 10)..Vcore in BIOS set to 1.55V.. mad.gif
DDR667 running @ 855Mhz..Timing 5-5-5-15 default Vdimm (1.8V) wink.gif

This post has been edited by Hoodlums: Oct 18 2007, 08:25 PM
sukhoi37
post Oct 18 2007, 10:43 PM

Into Computer Since 2002
*******
Senior Member
4,810 posts

Joined: Jan 2003



QUOTE(Hyde`fK @ Oct 17 2007, 12:22 AM)
There're a few to choose from.

Gigabyte P35 DS3
Asus P5K SE
Abit IP35-E
Biostar TD35D2-A7
*
QUOTE(tAmp0i @ Oct 17 2007, 12:23 AM)
Abit IP35-E for just < RM400. Cheap and rich overclocking menu...

user posted image
Picture courtesy www.soft32.ru
*
QUOTE(rlhc17 @ Oct 17 2007, 12:45 PM)
Abit good rclxms.gif easy setup & fast  drool.gif
*
Thanks for the opinion.
I'm going for Abit ^^
Ezonizs
post Oct 18 2007, 10:56 PM

~*~Freak~*~
******
Senior Member
1,055 posts

Joined: Sep 2007
From: Subang Jaya



guys , need some opinion. icon_question.gif

i'm using P35-DS3P motherboard , E6400 CPU , 2GB XMS2 DHX Corsair 800MHz C4 ram, zalman 9700LED cooler, FSP 600 watts true power.

i'm currently running at 3.2GHZ without problems, however if i wish to go beyong 3.2GHz exp. 3.4GHZ , 3.5GHz i encounter problems during start up blue screen , auto restart etc ..... but you guys here managed to go beyong 3.5GHZ blink.gif

Using Windows Vista Ultimate 64-bit
400MHZ X 8 multiplier = 3.2GHZ
my VCORe voltage is : 1.408V
RAM voltage : 2.2v
ram timing : 5-5-5-15
memory ratio 4:5
now RAM running at 1000MHZ
PCI-Express at 100Mhz

now i using system voltage control to AUTO .

advise plsplsps i wan to reach 3.6GHz plsplspspls I abit confuse on increasing voltages here plspsls advise

another question my RAM is meant to be run at timing 4-4-4-12 but the CPU-Z detected 4-4-4-13 is it normal or my ram is faulty ??

user posted image

advice greatly appreciated nod.gif
kennji
post Oct 18 2007, 11:06 PM

Casual
***
Junior Member
381 posts

Joined: Jun 2007
From: イチゴ軍団
probably need to bump up some vcore, 1.45v maybe? for me, i would drop the memory ratio down to 1:1 first to see if it can boot up sucessfully by further raising the FSB...
baok
post Oct 18 2007, 11:19 PM

Enthusiast
*****
Senior Member
737 posts

Joined: Oct 2005


QUOTE(Ezonizs @ Oct 18 2007, 10:56 PM)
guys , need some opinion. icon_question.gif

i'm using P35-DS3P motherboard , E6400 CPU , 2GB XMS2 DHX Corsair 800MHz C4 ram, zalman 9700LED cooler, FSP 600 watts true power.

i'm currently running at 3.2GHZ without problems, however if i wish to go beyong 3.2GHz exp. 3.4GHZ , 3.5GHz i encounter problems during start up blue screen , auto restart etc ..... but you guys here managed to go beyong 3.5GHZ  blink.gif

Using Windows Vista Ultimate 64-bit
400MHZ X 8 multiplier = 3.2GHZ
my VCORe voltage is : 1.408V
RAM voltage : 2.2v
ram timing : 5-5-5-15
memory ratio 4:5
now RAM running at 1000MHZ
PCI-Express at 100Mhz

now i using system voltage control to AUTO .

advise plsplsps i wan to reach 3.6GHz plsplspspls I abit confuse on increasing voltages here plspsls advise

another question my RAM is meant to be run at timing 4-4-4-12 but the CPU-Z detected 4-4-4-13 is it normal or my ram is faulty ??

user posted image

advice greatly appreciated  nod.gif
*
try fsb:ram = 1:1, then bump the vcore a bit... until 1.45v.. or dont over 1.5v on aircooling
try to increase vMCH and vFSB by +0.1v.. either let PCI clock at auto or fix it at 100MHz...

check your ram with memtest86+.. google it.. run orthos blend for at least 8hrs to confirm it stability..

goodluck smile.gif


-edit-

just realized your E6400 stepping is L2.. like those E4xxx and E2xxx series.. erm.. is your E6400 OEM???

This post has been edited by baok: Oct 18 2007, 11:21 PM
Ezonizs
post Oct 19 2007, 12:01 AM

~*~Freak~*~
******
Senior Member
1,055 posts

Joined: Sep 2007
From: Subang Jaya



QUOTE(baok @ Oct 19 2007, 12:19 AM)
try fsb:ram = 1:1, then bump the vcore a bit... until 1.45v.. or dont over 1.5v on aircooling
try to increase vMCH and vFSB by +0.1v.. either let PCI clock at auto or fix it at 100MHz...

check your ram with memtest86+.. google it.. run orthos blend for at least 8hrs to confirm it stability..

goodluck smile.gif
-edit-

just realized your E6400 stepping is L2.. like those E4xxx and E2xxx series.. erm.. is your E6400 OEM???
*
ya from HP XD


Added on October 19, 2007, 12:19 am
QUOTE(baok @ Oct 19 2007, 12:19 AM)
try fsb:ram = 1:1, then bump the vcore a bit... until 1.45v.. or dont over 1.5v on aircooling
try to increase vMCH and vFSB by +0.1v.. either let PCI clock at auto or fix it at 100MHz...

check your ram with memtest86+.. google it.. run orthos blend for at least 8hrs to confirm it stability..

goodluck smile.gif
-edit-

just realized your E6400 stepping is L2.. like those E4xxx and E2xxx series.. erm.. is your E6400 OEM???
*
dude i tried your suggestion and i increase the FSB to 425 X 8 = 3.4GHZ TAK JADI ... lol cry.gif loading microsoft then BLUE SCREEN mentioning DUMPING PHYSICAL MEMORY then auto restart... lol any more thoughts??

AND can i set my RAM run above 1000MHZ exp . 1100MHZ++ by setting timing lower then 5-5-5-15 ? prefer Cas 4 lol~~ you may suggest any available timings for my RAM . TY

This post has been edited by Ezonizs: Oct 19 2007, 12:51 AM
gengstapo
post Oct 19 2007, 02:10 AM

Retired enthusiast
********
All Stars
10,688 posts

Joined: Jan 2005
try put vcore 1.425/ 1.45v
pcie voltage 1.55v
vdimm 1.9v
timming 5-5-5-15
vMCH/ vFSB +0.2

disable:-
spread spectrum
C1E
execute bit
speed step tech

c how thing goes..

ps: is there any other misc. setting for RAM instead of tCL-tRCD-tRP-tRAS for ur board?
Hoodlums
post Oct 19 2007, 08:37 AM

On my way
****
Senior Member
598 posts

Joined: Sep 2004



Bro tAmp0i, update ranking for E4400 plisss ~ laugh.gif
salimbest83
post Oct 19 2007, 08:47 AM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang



QUOTE(Hoodlums @ Oct 18 2007, 05:23 PM)
Bro set manually PCI-E Freq to 100Mhz  wink.gif


Added on October 18, 2007, 8:25 pmuser posted image
Hehe 3.42Ghz (342Mhz x 10)..Vcore in BIOS set to 1.55V.. mad.gif
DDR667 running @ 855Mhz..Timing 5-5-5-15 default Vdimm (1.8V) wink.gif
*
yep..

already set to 100Mhz..but after kill my x300 la..
lucky me its not happen on my x1950GT.. sweat.gif

and honestly....

e6750 steeping can go higher if using perf rams la...
currently just using 2GB of kingston value ram only...
max @880MHz..

now my proc running @ 430x8@3440Mhz @ 1.424v..
rams 5,5,5,20 @ 880Mhz

temp okay la.. around 55+ only
toughnut
post Oct 19 2007, 10:00 AM

Look at all my stars!!
*******
Senior Member
3,239 posts

Joined: Jun 2005
@Ezonizs
remember that all cpu arent equal.

i'm using the same board and managed to push e6600 to 3.8xGHz before with vCore of 1.75v on AIR LOL. suicide run.

imho, v1.50 is still safe if u wanna test the limit biggrin.gif
Ezonizs
post Oct 19 2007, 11:24 AM

~*~Freak~*~
******
Senior Member
1,055 posts

Joined: Sep 2007
From: Subang Jaya



QUOTE(toughnut @ Oct 19 2007, 11:00 AM)
@Ezonizs
remember that all cpu arent equal.

i'm using the same board and managed to push e6600 to 3.8xGHz before with vCore of 1.75v on AIR LOL. suicide run.

imho, v1.50 is still safe if u wanna test the limit biggrin.gif
*
kk i'll try lol nvm suicide run then january change Q9450 XD woot..... if i need to chnage to liquid cooling system but DAMMIT i'm using cooler master centurion 5 casing ...... cannot put the pump and Reservoir casing too PACK and my graphic card is 8800GTX used up two slots and plus a soundcard unless i opt for external liquid cooling which is much more expensive T.T cry.gif

This post has been edited by Ezonizs: Oct 19 2007, 11:43 AM
intune
post Oct 19 2007, 07:38 PM

LOWYAT 1ST MALAYSIA 2nD
*****
Senior Member
879 posts

Joined: Jan 2003



QUOTE(Ezonizs @ Oct 19 2007, 11:24 AM)
kk i'll try lol nvm suicide run then january change Q9450 XD woot..... if i need to chnage to liquid cooling system but DAMMIT i'm using cooler master centurion 5 casing ...... cannot put the pump and Reservoir casing too PACK and my graphic card is 8800GTX used up two slots and plus a soundcard unless i opt for external liquid cooling which is much more expensive T.T  cry.gif
*
Q9450 what multiplier..?
iceman31
post Oct 19 2007, 07:48 PM

Mewtwotwotwotwo
*******
Senior Member
2,631 posts

Joined: Dec 2005
From: Keramat



JUst wondering E6550 on 2.8ghz temperature about 64c max loading is it normal??

oh yaeh why i cant overvoltage?? it seams when ever i change the cpu voltage in bios it still will be 1.28v

oredy off the auto voltage...
kmarc
post Oct 19 2007, 10:05 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(iceman31 @ Oct 19 2007, 07:48 PM)
JUst wondering E6550 on 2.8ghz temperature about 64c max loading is it normal??

oh yaeh why i cant overvoltage?? it seams when ever i change the cpu voltage in bios it still will be 1.28v

oredy off the auto voltage...
*
What application are you using to read the temperature? And is it at stock voltage?

Again, application reading of vcore is inaccurate. Since you're using the P35-DS3, you can try to use the easytune5, which also shows the vcore. For mine, I set 1.425v in BIOS but shows as 1.39v in easytune5.....
jackanory
post Oct 20 2007, 12:38 AM

Casual
***
Junior Member
349 posts

Joined: Jul 2006
kmarc, i see ur siggy, interesting.. whats ur ambient temps.. when u got that 51c when running orthos.


kmarc
post Oct 20 2007, 03:51 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(jackanory @ Oct 20 2007, 12:38 AM)
kmarc, i see ur siggy, interesting.. whats ur ambient temps.. when u got that 51c when running orthos.
*
Errrr.... I'm staying in Kuching so the ambient is like 28-30'c. The core temperature is based on Easytune5's readings.

The problem with the E6x50 series CPUs is that the correct core temperature is not really known. I had opened a thread on this : http://forum.lowyat.net/topic/496060. However, up to now, I don't really know whether this is my true CPU temperature. Intel is not telling and even 3rd party software authors don't really know. The author of "core temp", like many sources, suggested adding 15'c to the core temperature but this is based on observations only and not on any concrete proof/information.
iceman31
post Oct 20 2007, 09:08 AM

Mewtwotwotwotwo
*******
Senior Member
2,631 posts

Joined: Dec 2005
From: Keramat



QUOTE(kmarc @ Oct 19 2007, 10:05 PM)
What application are you using to read the temperature? And is it at stock voltage?

Again, application reading of vcore is inaccurate. Since you're using the P35-DS3, you can try to use the easytune5, which also shows the vcore. For mine, I set 1.425v in BIOS but shows as 1.39v in easytune5.....
*
i cant change the voltage so i just put auto doh.gif doh.gif

using it easytune5... core temperature still 60c~64c

n the voltage hmm... 1.34

QUOTE(kmarc @ Oct 20 2007, 03:51 AM)
Errrr.... I'm staying in Kuching so the ambient is like 28-30'c. The core temperature is based on Easytune5's readings.

The problem with the E6x50 series CPUs is that the correct core temperature is not really known. I had opened a thread on this : http://forum.lowyat.net/topic/496060. However, up to now, I don't really know whether this is my true CPU temperature. Intel is not telling and even 3rd party software authors don't really know. The author of "core temp", like many sources,  suggested adding 15'c to the core temperature but this is based on observations only and not on any concrete proof/information.
*
wat is ambient?? whistling.gif whistling.gif
kmarc
post Oct 20 2007, 01:30 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



QUOTE(iceman31 @ Oct 20 2007, 09:08 AM)
i cant change the voltage so i just put auto  doh.gif  doh.gif

using it easytune5... core temperature still 60c~64c

n the voltage hmm... 1.34
wat is ambient??  whistling.gif  whistling.gif
*
Why can't you change the vcore? The P35-DS3 can change the Vcore easily. Make sure you press the Ctrl+F1 when you're in the main bios page, before you go into the M.I.T page.

If easytune5 is already showing 60-64'c, then that's the limit you want to go. In general, the recommendation is to keep the temp below 60'c. You are using stock HSF right?

Ambient temperature is the surrounding temperature e.g. room temperature....

I'm curious, just download core temp version 0.95.4, and see what is your temperature. Don't get shocked if it is higher than that as the author has set the Tjunction to 100'c, making all temperature 15'c higher...... The problem is, which one to believe.... rclxub.gif

This post has been edited by kmarc: Oct 20 2007, 01:32 PM
t3chn0m4nc3r
post Oct 20 2007, 03:29 PM

Teh Necron Lord
*******
Senior Member
4,139 posts

Joined: Sep 2006
From: Internet


QUOTE(kmarc @ Oct 20 2007, 02:30 PM)
Why can't you change the vcore? The P35-DS3 can change the Vcore easily. Make sure you press the Ctrl+F1 when you're in the main bios page, before you go into the M.I.T page.

If easytune5 is already showing 60-64'c, then that's the limit you want to go. In general, the recommendation is to keep the temp below 60'c. You are using stock HSF right?

Ambient temperature is the surrounding temperature e.g. room temperature....

I'm curious, just download core temp version 0.95.4, and see what is your temperature. Don't get shocked if it is higher than that as the author has set the Tjunction to 100'c, making all temperature 15'c higher...... The problem is, which one to believe....  rclxub.gif
*
easytune perhaps... or speed fan... hmm.gif
fesick
post Oct 20 2007, 05:25 PM

Serious mode
*******
Senior Member
2,009 posts

Joined: Oct 2006
From: My house
@iceman31

u cant change vcore..or u dont want to change?
set vcore auto quite high oh..i tried it b4
iceman31
post Oct 20 2007, 05:30 PM

Mewtwotwotwotwo
*******
Senior Member
2,631 posts

Joined: Dec 2005
From: Keramat



QUOTE(kmarc @ Oct 20 2007, 01:30 PM)
Why can't you change the vcore? The P35-DS3 can change the Vcore easily. Make sure you press the Ctrl+F1 when you're in the main bios page, before you go into the M.I.T page.

If easytune5 is already showing 60-64'c, then that's the limit you want to go. In general, the recommendation is to keep the temp below 60'c. You are using stock HSF right?

Ambient temperature is the surrounding temperature e.g. room temperature....

I'm curious, just download core temp version 0.95.4, and see what is your temperature. Don't get shocked if it is higher than that as the author has set the Tjunction to 100'c, making all temperature 15'c higher...... The problem is, which one to believe....  rclxub.gif
*
kk i try

QUOTE(fesick @ Oct 20 2007, 05:25 PM)
@iceman31

u cant change vcore..or u dont want to change?
set vcore auto quite high oh..i tried it b4
*
i want... but when i press the manual for voltage... then i press the cpu voltage n raise into like 1.33 it still showing 1.28 at cpuz n easy tune5

hmm tested the Core Temp 0.95.4

Keep geeting auto restart

This post has been edited by iceman31: Oct 20 2007, 06:12 PM
mddl_fngz
post Oct 22 2007, 11:52 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2006
From: 93050


user posted image

does anyone know what monitoring software this guy is using?looks neat.
coolice
post Oct 22 2007, 11:54 AM

Team OCD!
******
Senior Member
1,857 posts

Joined: Sep 2004
From: ocdrift.com


QUOTE(mddl_fngz @ Oct 22 2007, 11:52 AM)
user posted image

does anyone know what monitoring software this guy is using?looks neat.
*
everest smile.gif
mddl_fngz
post Oct 22 2007, 12:55 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2006
From: 93050


thanks smile.gif

thought it's freeware though hehe....guess i'll just stick with speedfan...i have one question about speedfan,it's the +12v rail reading...shouldn't it be like 12.xxx volt instead of the one in the screenshot below?

user posted image
kmarc
post Oct 22 2007, 01:24 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



CPUZ is not accurate for reading voltages, as with many software apps. Not to worry about the +12v voltages, mine indicating +2.33v..... smile.gif
sup3rfly
post Oct 22 2007, 08:47 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


CPU: E6850
CPU Speed: 4221Mhz
RAM: Team Xtreem Micron D9GMH DDR2 OPB Edition
RAM Speed: DDR1172 4-4-4-4
Mobo: Gigabyte P35 DS3P
Cooling: Aquaxtreme MP05

Results: 11.922s

user posted image

Testing Q6600 now.... just got it today will update again smile.gif


Added on October 23, 2007, 11:55 ambro sorry the mobo is P35 DS3P...that time not maximus yet smile.gif

This post has been edited by sup3rfly: Oct 23 2007, 11:55 AM
salimbest83
post Oct 23 2007, 01:17 PM

♥PMS on certain day♥
*******
Senior Member
8,642 posts

Joined: Feb 2006
From: Jelutong Penang



QUOTE(sup3rfly @ Oct 22 2007, 08:47 PM)
CPU: E6850
CPU Speed: 4221Mhz
RAM: Team Xtreem Micron D9GMH DDR2 OPB Edition
RAM Speed: DDR1172 4-4-4-4
Mobo: Gigabyte P35 DS3P
Cooling: Aquaxtreme MP05

Results: 11.922s

user posted image

Testing Q6600 now.... just got it today will update again smile.gif


Added on October 23, 2007, 11:55 ambro sorry the mobo is P35 DS3P...that time not maximus yet smile.gif
*
fuiyo...

u pass the 4GHz barrier...
can u runninng at that speed 24/7...?


sup3rfly
post Oct 23 2007, 05:52 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


dont think thats possible...if yes it will be high vcrore...no point doin that currently doin 3.6ghz 1.4v daily
AceCombat
post Oct 23 2007, 08:36 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


yup,no point running so fast and u r just killing ur processor.
sup3rfly
post Oct 24 2007, 05:58 PM

Techno Slave
******
Senior Member
1,561 posts

Joined: Jan 2003
From: 秋葉原電気街


from 3.0ghz OCed to 3.6ghz i can actually notice a lil smoothness on my system.... seriously smile.gif
keep getting the lowest vcore for 3.6ghz currently 1.4v not too bad eh smile.gif
v1rtual
post Oct 24 2007, 11:40 PM

ALPHA
*****
Senior Member
873 posts

Joined: Jan 2007


need some little help here guys
my specs are ASUSP5KR, E6750 --1.4v, 2GB Kingston Ram 800Mhz
anyone experience OC-ing this board before?? cause when i put the fsb to 450 with 8 multiplier, the system failed to boot windows
and as seen in the snap shot my idle temperature is only 29c using gigabyte G power-pro
why is it so?? i have checked from the bios, same temp
thx in advance notworthy.gif notworthy.gif
Attached Image

This post has been edited by v1rtual: Oct 25 2007, 02:35 PM
kmarc
post Oct 25 2007, 12:30 AM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak



You sure it is not the E6750? My E6750 is only stable at 1.425v (bios) at 438x8 = 3.5Ghz...... smile.gif
zeustronic
post Oct 25 2007, 04:17 PM

Retire OC Into Audiophiles
*******
Senior Member
2,605 posts

Joined: Jan 2006
From: A Place Between Heaven & Hell


QUOTE(sup3rfly @ Oct 24 2007, 06:58 PM)
from 3.0ghz OCed to 3.6ghz i can actually notice a lil smoothness on my system.... seriously smile.gif
keep getting the lowest vcore for 3.6ghz currently 1.4v not too bad eh smile.gif
*
@3.6Ghz felt lots of difference while gaming, rendering stuff, loading apps & when u multiplayer LAN or Online loading speed alwis faster than others hehe^^...
AceCombat
post Oct 25 2007, 06:42 PM


Group Icon
Elite
5,434 posts

Joined: Dec 2006


QUOTE(v1rtual @ Oct 24 2007, 11:40 PM)
need some little help here guys
my specs are ASUSP5KR, E6750 --1.4v, 2GB Kingston Ram 800Mhz
anyone experience OC-ing this board before?? cause when i put the fsb to 450 with 8 multiplier, the system failed to boot windows
and as seen in the snap shot my idle temperature is only 29c using gigabyte G power-pro
why is it so?? i have checked from the bios, same temp
thx in advance notworthy.gif  notworthy.gif
Attached Image
*
bro,my friend having problem booting the mobo beyond 450fsb too,maybe u try to increase the chipset voltage a bit see got help or not?
cstkl1
post Oct 25 2007, 06:48 PM

Look at all my stars!!
Group Icon
Elite
6,799 posts

Joined: Jan 2003

QUOTE(zeustronic @ Oct 25 2007, 04:17 PM)
@3.6Ghz felt lots of difference while gaming, rendering stuff, loading apps & when u multiplayer LAN or Online loading speed alwis faster than others hehe^^...
*
tip its not the mhz that makes the difference

its the bus speed in relation to ure rams

thats whats making the difference
except for rendering its pure mhz


Added on October 25, 2007, 6:50 pm
QUOTE(sup3rfly @ Oct 24 2007, 05:58 PM)
from 3.0ghz OCed to 3.6ghz i can actually notice a lil smoothness on my system.... seriously smile.gif
keep getting the lowest vcore for 3.6ghz currently 1.4v not too bad eh smile.gif
*
yup not bad

x38 now sean can do with his x6800 also at 1.4 kekek compared to last time

This post has been edited by cstkl1: Oct 25 2007, 06:50 PM
v1rtual
post Oct 25 2007, 06:54 PM

ALPHA
*****
Senior Member
873 posts

Joined: Jan 2007


QUOTE(AceCombat @ Oct 25 2007, 06:42 PM)
bro,my friend having problem booting the mobo beyond 450fsb too,maybe u try to increase the chipset voltage a bit see got help or not?
*
has your friend tried to to increase the chipset voltage??
what ram is he using btw??
i just tried fsb 335 x8 @ 1.45v and kingston 800mhz ram latency 5 5 5 20 @ 1.9v, after 1hour50mins the prime95 error ady
what should i do yeah??



This post has been edited by v1rtual: Oct 25 2007, 07:04 PM

3 Pages  1 2 3 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.2727sec    0.27    6 queries    GZIP Disabled
Time is now: 7th December 2025 - 07:18 AM