wow, revision3 already? then it's good sign for new breed of fsb1333 to be listed here. any user of e6x50 want to share the OC stats?

i'm using tracer 800 too, running ddr900 at 4-4-4-8 with 1.9v. not orthos stable but running 24/7 without problem, period

@kmarc,
i'm in UNIMAS, samarahan. if can test, remember me ya hehe
btw, is your proc orthos stable after OC? 3.2Ghz seem bit too low le. aim for 4Ghz and higher la

OC as a profession? must be starving for voltage and TIM everyday lol

anyone using DFi P35 board already? interested to see the real OC result. 8phase digital PWM in action

all seem going for 4Ghz... seem like i will change my proc too

i didn't touch my vFSB, vMCH too when OC. doesn't seem to make any different. the board i'm on now is P35-DS3P

actually i use asus P5K Deluxe and gigabyte P35-DS3P.

in term of layout, DS3P>P5K Dlx

in term of color, DS3P>P5K Dlx (like cocktail versus black coffee...)

in term of bios, DS3P=P5K Dlx (likes the oc setting in Dlx but some function missing like multiple profile, quick boot select, etc)

in term of oc, no direct comparison tested. actually wanna test my friend Q6600 on my P35-DS3P but tediously to remove HSF, apply TIM, attached HSF, test, remove HSF, apply TIM, repeat for few times....

btw, B3 Q6600 oc well on Dlx, 3Ghz stock voltage orthos and occt stable. Other spec is silverstone decathlon DA650, HD2900XT, 2GB ballistix tracer 800

pic attached below is my first run with Q6600, directly running 3.2Ghz without problems (except heat). notice that the ram is DDR3 instead of DDR2


This post has been edited by toughnut: Aug 15 2007, 11:02 AM

@-pWs-
my pc still virgin. not even connected to internet before...we dont have online connection in hostel. offline university...

btw, that Q6600 rig not mine. just help buy and assemble for my friend. icthy and OC it, with permission of course. that ram correct timing is 4-4-4-4, DDR800 vdimm=2V

that cpuz totally screwed one. if not mistaken, already been mentioned by one of the forumer before. even DDR showed DDR3 while another page showed DDR2... CAS #32 is insane too.

hmmm. then better i keep it for him lol.

btw, his Q6600 also cooled by Xigmatek S1283 HDT but with single fan config. still hot, load around 66C with 1.325v 3GHz

try biostar or gigabyte P35 board. for abit, only get if if you go for Pro version.

look really messy that rig
but nice temp and clock though. 3.9Ghz at 55C

all Q6600 minimum speed seem like 4Ghz.... scary... time to burn my pocket?

bro, update my stats. cant hold myself back while watching others pumping voltage to their cpu

Here my stats:
intel E6600ES B0
426*9 = 3834MHz
vCORE= 1.75V
actual= 1.712V

HSF: Xigmatek HDT-S1283 Push Pull Config

2GB Crucial Ballistix Tracer DDR800
426MHz 4-4-4-4
vDIMM= 2.1V

Gigabyte P35-DS3P rev1.0 (BIOS F5)
vMCH= +0.3V
vFSB= +0.3V

Super1M 13.562s


edit for typing error

This post has been edited by toughnut: Sep 4 2007, 12:13 PM

my experience with Coretemp actually a bit different. yep, it caused instant restart ONLY if i enable EIST, etc. if i disabled all those power saving function in BIOS, it work perfectly.

yup. 4 stick of ram running stablily at 1000fsb+ is a good run already.

a-data also produce high performance ram but i never bother to check the chip they are using though

@siauann

lol. my E6600ES around 8xC idle. IDLE LOL.

but when check via mobo monitoring software, only 42C lol

now with xigmatek s1283, idling 32c

AFAIK, highest FSB depend on proc too. FSB wall. 520FSB might not be the highest FSB X38 can go but DaRkSyThE's proc.

anyway, DaRkSyThE, no photos to share? keeping to yourself?

i wish it was mine nope, it reserved for another forumer.

if maxi really good, might keep it for myself. but the board price... aiyo

6ghz quad is insane. good for video encoding lol

xigmatek s1283 or cm geminII will be enough. personally i prefer xigmatek though