Bro Tampoi add my to the list..


[attachmentid=272103]

Mobo: Biostar 965PT
Rams: 1GB Kingston Hynix C4 (5-4-4-10) (for Testing Only)
Cooling: CM HyperTX
PSU: Silverstone ST56F

Bro T4mpoi ... add me to the List!

Mobo : Biostar 965PT Rev1.0 (ol Skool)
CPU: Q6600 G0
Rams: Team Value Rams DDRII 667MHz (D9's) - DDRII 1000 MHz (5-5-5-15)
Cooling: Xigmatek SL1283 + Arctic Cooling MX-2 TIM
PSU : Silverstone ST56F
NB: TT Spirit II


so far this 3.6Ghz is really stable .


[attachmentid=283575]

This post has been edited by intune: Aug 25 2007, 10:13 AM

Post edited.. now at 3.6Ghz full Pi completed.. also nice temp!

---

Added on August 24, 2007, 12:33 pmsub-12 league.. hope youre kidding.

Anyways managed to reach 3.6Ghz today .. full Pi test completed.. also happy wif temp.

Vcore at 1.35 abit vdroop.. but overall happy with results.

Did a small test 5mins ago at 3.78GHZ ..still need tweaking!



This post has been edited by intune: Aug 24 2007, 12:33 PM

Yeah OCCT stable.. will do atleast a 24hrs test soon.

Another great results! Mine telling us the load temp on that OC?

This post has been edited by intune: Aug 26 2007, 04:18 PM

Really shows how good intel family processor is today!

Bro Tampoi pls update my results..

intune - Q6600@3.73GHz, 415 x9 / Biostar TForce 965PT (ol Skool) / 2GB DDRII-830, 5-6-6-18 / Xigmatek S1283 /

[attachmentid=288644]

what u mean G0 rev.b? im using G0 Stepping B.. is that it?

My temp Q6600@3Ghz almost same as stock!



This post has been edited by intune: Sep 5 2007, 12:49 PM

Confirm then B rev is better then A.. ..anyways where did u get it..cos when in went to lowyat few weeks back there only got the A rev.

Anyways.. pls update my latest Results Bro Tampoi!

intune - 3.81GHz, 422 x9 / Biostar TForce 965PT / 2GB DDRII-844, 6.0-6-6-18 / Xigmatek S1283

[attachmentid=290507]



This post has been edited by intune: Sep 7 2007, 01:46 AM

Vdroop very bad on this mobo..can only do it at 2.2V but vdroop 2.11 and this oc done on my Team Value Rams.. tried high timing but not stable..

from experience the high oc will compensate for the loose timing..nevertheless a better timing from a good ram is better..but as uve seen its not the case.. but running anhything above 3.5GHz on a Quad is already a screamer on any benchmark and for daily use.

I think this Team value ram quiet good but need high Vdimm to go stable. My old Biostar 965PT can only go 2.2V VDimm but due to vdroop can only do 2.11

I think if i do the pencil mod to increase VDimm maybe can go higher with better timing ..but if got $$ for sure go for D9GMH rams..

thnks for tip bro.. will do it once i pencil mod my vdimm on mobo.

non need to change your 965 ..Just upgrade to Quad Q6600 G0.. im sure it will drag you back to OC'in..

I want a new P35 OC mobo to replace my Biostar 965PT..any recomendations? Currently doing 3.6Ghz daily on my Quad.

im feeding 1.35V Vcore (Bios) Daily at 3.6Ghz on my Quad G0 .. Super Stable pass Orthos & Prime 8 Hours. Tho it says 1.328V on Cpu-Z.

---

Added on September 23, 2007, 9:24 pmWill the DFI Infinity P35 T2RL be full proof for Yorkfield or shud I go for X38/48 instead?

This post has been edited by intune: Sep 23 2007, 09:24 PM

http://ramlist.ath.cx/ddr2/

to check a-data chipset used.

..try Coretemp or your motherboard temp utility that comes with your mobo for accurate reading for your ES.

Get the Xigmatek S1283..