Intel® Core(tm)2 Duo/Quad Overhauled Rev. 3, The journey continues....
|
|
 Sep 5 2007, 11:58 AM
Return to original view | Post
#1
|
 
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island 
|
well i think with the new G0 stepping with 3.0 OC the temp should be acceptable too...anyway look at this link if u guys were confuese
http://www.xbitlabs.com/articles/cpu/displ...quad-q6600.html |
|
|
|
|
|
Nov 13 2007, 03:55 AM
Return to original view | Post
#2
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
i have jumped my ass from amd to intel and i am still noob in oc...heres my oc result...quite happy tho
|
|
|
Nov 13 2007, 04:05 AM
Return to original view | Post
#3
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
QUOTE(kmarc @ Nov 13 2007, 03:58 AM) Nice. Make sure your core temp is acceptable and the vcore is not too high.... err how to say acceptable temp? if prime time over 70 around 70> <75 is this temp ok? wat vcore should i put for lower.? the below one occt pic i put 1.46...the top i put 1.48...seems both stable |
|
|
Nov 13 2007, 04:38 AM
Return to original view | Post
#4
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
QUOTE(wodenus @ Nov 13 2007, 04:28 AM) 70-75 is borderline. Max TCase for this processor is 71c (see http://processorfinder.intel.com/details.aspx?sspec=slacr# for details) so if it goes above that you might as well not be overclocking because the TM will throttle the processor. So best keep it at about 67c max. oh alrite...will buy new cooler soon. |
|
|
Nov 16 2007, 01:30 AM
Return to original view | Post
#5
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
taiko sekalian...when i oc my rig to 3.6ghz q6600...and when i prime for 1 hour it will auto restart...but if i under aircone...it will be stable...is tis mean cuz of temp?? but y only after 1 hour only restart?
|
|
|
Nov 16 2007, 10:32 AM
Return to original view | Post
#6
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
QUOTE(remysix @ Nov 16 2007, 07:18 AM) yup, totally the heat... stable under aircone for 3 and half hours...totally different when under aircone...surely can past prime after 1 hour...well currently on 3.4ghz..wait till better cooler for 3.6ghz...when u said stable under aircond...how long is that? This post has been edited by intothefantasy: Nov 16 2007, 10:33 AM |
|
|
|
|
|
Nov 18 2007, 12:15 AM
Return to original view | Post
#7
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
again sifu i ask for help...look at this pic
i am certain that i using 400x8 in bios...but the window and core temp is not showing my speed correctly.. |
|
|
Nov 18 2007, 03:11 AM
Return to original view | Post
#8
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
alrite...i think i understand...btw another question...i install everest and this is my temp(under stress)
i wanna ask...which temp actually do we need to really care of? the CPU temp? or the CPU #1 temp? cuz if i use asus probe...i only can see 1 CPU temp... |
|
|
Nov 18 2007, 04:27 AM
Return to original view | Post
#9
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
yea i know abt the sb and nb but i really wan to know which temp do i really need to monitor it...the core or cpu temp? because i was told by someone that the TM for q6600 is 71c...is that refer to cpu or the core?
This post has been edited by intothefantasy: Nov 18 2007, 04:28 AM |
|
|
Nov 26 2007, 03:19 AM
Return to original view | Post
#10
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
QUOTE(mmohdnor @ Nov 24 2007, 01:19 PM) great ...i broke one of my stock intel hsf locking pin... bro i using this arctic cooling freezer 7 pro with q6600 to 3.6ghz stablenow need to find replacement hsf .. some suggestions please? i'm using p35-ds3 mobo with c2d e4300 .. my aim is to oc to 3ghz ...thats good enuff .. ohh ya no need expensive one .. just as long it can provide good cooling and cheaper than RM120 ..can? is arctic cooling freezer 7 pro good? (noise and cooling wise) |
|
|
Nov 26 2007, 06:13 AM
Return to original view | Post
#11
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
67-70 lo with prime...not prime at 48...with 1.45vcore in bios and 1.43 in cpuz...but is stable still high temp...so i convert to 3.4ghz for daily...with 1.40vcore...1.38 in cpuz and temp 63-65 prime and normal at 43-44
This post has been edited by intothefantasy: Nov 26 2007, 06:14 AM |
|
|
Dec 6 2007, 12:16 AM
Return to original view | Post
#12
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
QUOTE(kevinwcw @ Dec 5 2007, 11:03 AM) why dont have e2180 result de?? http://forum.lowyat.net/index.php?showtopi...post&p=14524291 |
|
|
Dec 8 2007, 03:16 PM
Return to original view | Post
#13
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
i can say p35 tends to oc well i think (for quads) but if u are not into xfire i think p35 would be nice..
|
|
|
Dec 16 2007, 07:03 PM
Return to original view | Post
#14
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
benchable but not primeable
 
|
|
|
Dec 16 2007, 08:38 PM
Return to original view | Post
#15
|
|
Senior Member
1,561 posts Joined: Feb 2006 From: Penang island
|
QUOTE(gengstapo @ Dec 16 2007, 08:14 PM) u refering to the 3DMark ka? even if its passed(P.I/ 3DMark), i dont think it can stand the prime95.. as i said is not primeable    i can only bench with this maximum clock with this cpu...is damn poor one |
|
Topic ClosedOptions
|
| Change to: |  0.0381sec
 0.74
 7 queries
 GZIP Disabled
Time is now: 12th December 2025 - 01:51 AM |
Quote