Intel® Core(tm)2 Duo/Quad Overhauled Rev. 3, The journey continues....
|
|
 Aug 10 2007, 10:43 AM
Return to original view | Post
#1
|
 
Senior Member
737 posts Joined: Oct 2005  
|
QUOTE(kmarc @ Aug 8 2007, 05:40 PM) I don't think you need to increase your vMCH at all. My P35-DS3 can go up to a bus speed of 480mhz without any increase in vMCH or vFSB.... Can't go any higher probably due to my CPU FSB wall..... is your mobo is DS3 or DS3R/P???  |
|
|
|
|
|
Aug 20 2007, 11:40 AM
Return to original view | Post
#2
|
|
Senior Member
737 posts Joined: Oct 2005
|
QUOTE(max_87 @ Aug 20 2007, 06:08 AM) Using quad low RPM fans on the radiator, I'm a fan of quiet cooling that is your 24/7 rig??  [attachmentid=281188][attachmentid=281189]   |
|
|
Aug 20 2007, 04:01 PM
Return to original view | Post
#3
|
|
Senior Member
737 posts Joined: Oct 2005
|
ah... 55C load at 3.9gig is good temp
 perhaps you want to stay naked with your rig   |
|
|
Oct 13 2007, 12:52 AM
Return to original view | Post
#4
|
|
Senior Member
737 posts Joined: Oct 2005
|
erm... P35 vs X38.. who will win??
 if you compare 965 and 975, yes 965 can go at much higher fsb.. but if at clock to clock.. let say 380fsb, the 975 is faster... but then.. who is satisfied at below 500fsb?? but for me.. overclock means to get the most out of ordinary.. DS3R rocks  |
|
|
Oct 13 2007, 08:32 PM
Return to original view | Post
#5
|
|
Senior Member
737 posts Joined: Oct 2005
|
QUOTE(DaRkSyThE @ Oct 13 2007, 07:44 PM) wait i thought u had one too wow.. what proc dya use?? E6x50 i assume?? cant wait for some screenie  correct me if im wrong but one of the three boards went to you wait. im still testing the board. maxed out at 530 FSB on air so far preping my WC now |
|
|
Oct 18 2007, 11:19 PM
Return to original view | Post
#6
|
|
Senior Member
737 posts Joined: Oct 2005
|
QUOTE(Ezonizs @ Oct 18 2007, 10:56 PM) guys , need some opinion. try fsb:ram = 1:1, then bump the vcore a bit... until 1.45v.. or dont over 1.5v on aircooling i'm using P35-DS3P motherboard , E6400 CPU , 2GB XMS2 DHX Corsair 800MHz C4 ram, zalman 9700LED cooler, FSP 600 watts true power. i'm currently running at 3.2GHZ without problems, however if i wish to go beyong 3.2GHz exp. 3.4GHZ , 3.5GHz i encounter problems during start up blue screen , auto restart etc ..... but you guys here managed to go beyong 3.5GHZ  Using Windows Vista Ultimate 64-bit 400MHZ X 8 multiplier = 3.2GHZ my VCORe voltage is : 1.408V RAM voltage : 2.2v ram timing : 5-5-5-15 memory ratio 4:5 now RAM running at 1000MHZ PCI-Express at 100Mhz now i using system voltage control to AUTO . advise plsplsps i wan to reach 3.6GHz plsplspspls I abit confuse on increasing voltages here plspsls advise another question my RAM is meant to be run at timing 4-4-4-12 but the CPU-Z detected 4-4-4-13 is it normal or my ram is faulty ??  advice greatly appreciated  try to increase vMCH and vFSB by +0.1v.. either let PCI clock at auto or fix it at 100MHz... check your ram with memtest86+.. google it.. run orthos blend for at least 8hrs to confirm it stability.. goodluck -edit- just realized your E6400 stepping is L2.. like those E4xxx and E2xxx series.. erm.. is your E6400 OEM??? This post has been edited by baok: Oct 18 2007, 11:21 PM |
|
|
Oct 29 2007, 02:20 AM
Return to original view | Post
#7
|
|
Senior Member
737 posts Joined: Oct 2005
|
QUOTE(KahLooN @ Oct 29 2007, 01:13 AM) C2D E6550 @ 2.8GHz (400x7 w/ Xigmatek S1283) push it more.. that chip can easily past 3gig Asus P5K-SE Kingston VR DDR2 667 @ 800 (5-4-4-8)  |
|
Topic ClosedOptions
|
| Change to: |  0.0338sec
 0.41
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 10:20 AM |
Quote