Welcome Guest ( Log In | Register )

20 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

 Car Tint Advice - V2, Raytech, Vkool, Huper Optic, 3M or .....

views
     
TSmomo-sang
post Dec 4 2013, 02:35 PM, updated 9y ago

Getting Started
**
Junior Member
217 posts

Joined: Jan 2003
From: Kuala Lumpur



Hi all,
This is a version2 of the "HOT TOPIC" that we had discussed for the past few years.
Thanks all the supports who had actively utilized this open forum as a discussion stage.

Please continue from this thread. notworthy.gif notworthy.gif notworthy.gif

By the way, we had active forumers on Raytech, Huper Optic, 3M and VKool.

Do come in and discussion here.


Thanks!

1st Thread:
https://forum.lowyat.net/topic/418792/+3020

Summary:
1. Raytech, V-Kool, 3M are good in heat rejection. As long as it is original products. Beware of imitation products in the market.
Raytech Official Website
V-Kool Official Website
3M Local Distributor


2. Front Windscreen Films are very important where the most important thing is that housebrand can't compete with huge brands like Raytech Ultra70, V-Kool Elite or 3M Crystaline 70.

3. Beware of house brand in the market. Go to the window film specialist outlets to seek for more advice.

4. Always seek for warranty card for consumer rights and privilege after investing in car tinting.



This post has been edited by momo-sang: Sep 15 2015, 11:38 AM
shaguarbb
post Dec 4 2013, 02:53 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(momo-sang @ Dec 4 2013, 02:35 PM)
Hi all,
This is a version2 of the "HOT TOPIC" that we had discussed for the past few years.
Thanks all the supports who had actively utilized this open forum as a discussion stage.

Please continue  from this thread. notworthy.gif  notworthy.gif  notworthy.gif

By the way, we had active forumers on Raytech, Huper Optic, 3M and VKool.

Do come in and discussion here.
Thanks!
*
The Best thumbup.gif thumbup.gif thumbup.gif
eyez98
post Dec 4 2013, 02:56 PM

Isaactan.Net
******
Senior Member
1,521 posts

Joined: Jan 2003
From: Kuala Lumpur


nice!, but a link back to V1 will be useful on the first post smile.gif
KenDiriwan
post Dec 4 2013, 03:02 PM


*******
Senior Member
2,277 posts

Joined: Sep 2007
From: It's a tarp


Good one, keep all the good thoughts coming.
TSmomo-sang
post Dec 4 2013, 03:19 PM

Getting Started
**
Junior Member
217 posts

Joined: Jan 2003
From: Kuala Lumpur



Thanks all. I had add in the V1 link and closed the previous thread.
PM me if need to add more suggestion here for improvement.
Kanuki
post Dec 4 2013, 10:11 PM

Getting Started
**
Junior Member
123 posts

Joined: Jun 2005


I'm starting to think that Cool World gave me some kind of bad installation job.
It's because after the installation for almost a week. My front left passenger
window starting to have a few small bubbles already and some big bubbles
and the border of this window as well.

Tomorrow I'm going back to them and ask them to fix it.

wayfeel
post Dec 4 2013, 11:45 PM

Member of Elite Negotiators xD
*******
Senior Member
2,114 posts

Joined: Sep 2005
From: East


Holyshet.....version1 took almost 7 years to have version 2 LOL

Admin, is that a LYF record? I wonder which tered holds the number 1 as the longest time it took to have version2....



I'mma former user of V-Kool Elite on (8year old 05 H.City) and currently Huper Optik smile.gif Happy user both....but do notice V-kool Elite one bit greenish, very mildly tho.



This post has been edited by wayfeel: Dec 4 2013, 11:48 PM
lonely143
post Dec 5 2013, 12:59 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


TS, I think is better dont put brand in the topic there
Here my suggestion

Automotive Windows Film Tinting Advice V2

guardians
post Dec 5 2013, 11:51 AM

Getting Started
**
Junior Member
73 posts

Joined: Jan 2010
Need some advice here. Thanks.

1. Is there any big difference between security film of 5mil and 7mil?
2. Does thicker security film affect the power window's life span?

lewiszen
post Dec 5 2013, 02:30 PM

Getting Started
**
Junior Member
116 posts

Joined: Mar 2011
Which shops carry Llumar in Penang besides Ultracool?
Lord Gitsy
post Dec 5 2013, 02:40 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


You will never know what happening in window tinting market today. Until you read this...

user posted image

Before we started, I need to explain 2 things before we get confused on further statements. Window film is described based on high performance and high quality. Both aspects are important. High Performance means the window film possess superb heat rejection performance. High quality means prolonged lifetime of a window film’s material and its heat rejection performance can last for very long, for a minimum of at least 5 years. However, today, best-selling product in the market is very low in quality even though it has a considerably high performance. This means that the heat rejection is good for the first year and then it will drop more than 50% on second year. You will be surprised if I told you; the price is about the same for high and low quality film in market. Price range starts from few hundreds to two to three thousands depending on the heat rejection performance of the film.

user posted image


What was the Market Trends of Window Film Industry for 10-15 years ago?

* Branding was not important; customers had no idea how to look for good quality tint.

* Selling skills and salesman talks was more important at that time.

* Most tinting shop were doing own/local brand, they were not interested on good brand and International Brand, because they needed to come out with enormous amount of money for franchise fees and to purchase high cost products.

* At that time, hundreds of new brand tinting shops came out on market with many funny name.

* Korean film replaced USA film in almost all tinting shops in Malaysia.

* At that time, the Korean film was newly introduced into the market; many window tint sellers were attracted by its low costs and good heat rejection performance. However, nobody was aware of its quality, until it was proven that the heat rejection performance dropped in 12 months.

* Starting from that time until now, none of the tinting shop will tell you if they are selling Korean film, they keep cheating customer that they are selling USA film.

* After Korean products flooded Malaysia’s Tinting market, few things happened. Price war started among window film sellers, and all customers started getting low quality window film on their car, some even pay high price for it.

* After some time, we noticed more and more car on the road with the car windows full of bubbles, and waving. Incidents where the heat rejection dropped more than 50% after 1 year is also overwhelming.

* Due to unhealthy competition, many tinting shop with own brand/local brand started using unethical tricks in selling their products and they gradually started to lose their customers’ trust and confidence.


In window tint market crisis, few tricks that could easily been done by them include:

1. They Provide wrong/fake heat rejection. vmad.gif
Example, brochure printed IRR 95%, when tested with solar meter the real reading is below 50% or even below 20%.
That is why the price could be very different in different shops.

user posted image

2. Selling High Performance but Low Quality Product vmad.gif
The heat rejection performance lasts for maximum 1-2 years only. These films costs are actually much cheaper
and they are normally from Korea / Taiwan/ China 2-ply IR film or dye film.


3. "Made in USA" can sell better price. vmad.gif
Most of USA manufacturers are established company for making high performance and high quality products.
Unethical sellers that are not dealing with USA manufacturer deliberately printed "Made in USA" logo on their film
to cheat consumer so that they can sell higher price. Therefore, USA original and Low quality film selling about the same price in maket.
user posted image


4. Swap Product during Installation. vmad.gif
Many sellers use high performance and good quality products during demonstration, however later they swap with lower
performance and poor quality products during actual installation on your the vehicle.

user posted image


Current Market Trends in Window Film Industry

* Today, more and more consumers are aware about poor quality tinted, so they start doing research and surveys for a good quality tinted for their car.

* One of the best ways is to look for International Brand or popular USA brand in the market. Consumer is more confident on trusted brand.

* However, consumers still not necessarily know how to differentiate a good quality window tint.

* So, a new trend starts to appear, these own brand or local brand shop closes its business one by one, and many of these companies convert their shop to USA brand, by taking franchise from distributors. However, this is not happy ending story yet.

* Many of unethical sellers (Franchisee) misuse the USA brand to cheat consumer by selling non-original or fake products at their shop and name it with "House-Brand". These house-brands are not original USA products, there are no logo printed on the tint film and they give shop warranty card to their customers.

* “Shop Warranty card” meaning you must go back to the same shop where you fitted your window tint to claim warranty. Other dealers for the same brand will not entertained you as they possibly do not have same product in their shop.

* Worst thing even happened where the seller collected full amount of money from consumer and later swapped to other product (Korea Made) for all windows and rear windscreen. Only the front windscreen is original brand product.

user posted image





Click [Here] to Find Out More how to Choose a High Performance and Quality Window Tint.


This post has been edited by Lord Gitsy: Nov 10 2016, 11:53 PM
ultra_nyamuk
post Dec 5 2013, 02:55 PM

Regular
******
Senior Member
1,832 posts

Joined: Dec 2008
Went to two car dealers...and they said LLumar not good. Is this true ?
Volkswagen2
post Dec 5 2013, 03:02 PM

Casual
***
Junior Member
439 posts

Joined: Dec 2012
QUOTE(ultra_nyamuk @ Dec 5 2013, 02:55 PM)
Went to two car dealers...and they said LLumar not good. Is this true ?
*
You can try and tell us whether it's true or false.
lewiszen
post Dec 5 2013, 03:57 PM

Getting Started
**
Junior Member
116 posts

Joined: Mar 2011
QUOTE(ultra_nyamuk @ Dec 5 2013, 02:55 PM)
Went to two car dealers...and they said LLumar not good. Is this true ?
*
Why no good?
sj0217
post Dec 5 2013, 06:30 PM

Look at all my stars!!
*******
Senior Member
6,483 posts

Joined: Apr 2012
QUOTE(Lord Gitsy @ Dec 5 2013, 02:40 PM)
According to IWFA, Safety film ranges in thickness 4 mils to upwards of 21 mils and thicker. Somehow, for automobile window use is recommend between 4mil to 6mil thickness. Window film above 6mil may cause disrupt to your power window in 1-2 years time. Some car manufacturer already facing this problem few years ago and only experience shop will aware of this issue.

However we find a lot of shop offering 4-5mil thickness safety film to customer, but they tell the customer is 6-8mil. Guys, thicker safety film is not the selling point, laboratory on physical performance of safety film is the selling point.

In theory, 7mil thickness film provides slightly better smash resistance compare to 5mil, infact it is not much different in safety performance and costing. In Malaysia, safety film come with solar control performance. The different of price is normally due to different heat rejection. According to Raytech report, the metal/ ceramic coating on the film for heat rejection performance is so expensive in USA, on the other hand, the costing for the thickness of the film between 4-7mil is about the same.
*
Do you mean no point to go for 7 mil if compare to 6 mil? Since you mentioned above there is no much different in safety performance and costing, but definitely different on heat rejection
Lord Gitsy
post Dec 6 2013, 12:28 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(sj0217 @ Dec 5 2013, 06:30 PM)
Do you mean no point to go for 7 mil if compare to 6 mil? Since you mentioned above there is no much different in safety performance and costing, but definitely different on heat rejection
*
1 mil is 1/1000 inch. Thicker safety film is not the selling point, laboratory on physical performance of safety film is more important. Original USA 4mil safety film is good enough.
ultra_nyamuk
post Dec 6 2013, 11:09 PM

Regular
******
Senior Member
1,832 posts

Joined: Dec 2008
QUOTE(Volkswagen2 @ Dec 5 2013, 03:02 PM)
You can try and tell us whether it's true or false.
*
QUOTE(lewiszen @ Dec 5 2013, 03:57 PM)
Why no good?
*
Hmm..I also dunno..that's why I ask here. They give responses like.. "LLumar ah ?? No good one lah that one.. "
If one dealer say..I don't mind..probably he's trying to sell his panel tint company.. But both different dealers say it...so just wondering is it true? I used to think that Llumar is a good brand..like 3m etc..
Lord Gitsy
post Dec 7 2013, 04:24 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


Raytech Safety film is develop in Commonwealth Laminating and Coating, Inc, tested by America National Standard Institute. As window film specialist, Raytech just emphasis in the thickness of 4-6mil for automobile window used. Normally, 6mil and above will cause disruption of power window in1-2 years time in most of car.

Safety and security films are usually used to improve the performance of the glass for protection against human impact, bomb blasts, natural disaster, intrusion or seismic activity.

Safety film is always described in term of “mils”, which is a measurement of thickness as one thousandth of an inch (1/1000 inch). One mil equals 25.4 microns (micrometers). Safety film ranges in thickness 4 mils to upwards of 15 mils and thicker. The varying thickness is achieved by mechanically laminating multiple layers of film together with aggressive adhesive coatings. The Safety film is attached to the glass with extremely aggressive pressure sensitive adhesive. When stress causes the glass to break, the film has ability to stretch and absorb some or all of the energy generated by the stress. The result is that the broken glass may remain intact within the framing system preventing shards of glass becoming lethal projectiles.

Designed for applications where safety and security is a priority
a) Excellent solar performance, including heat and UV rejection, as well as glare reduction Superior optical clarity
b) Advanced adhesive formulation
c) Evaluation according to the following test methods/standards:
Small Missile Impact Test – ANSI Z-97.1 and CPSC 16 CFR 1201
Large Missile Impact Test & Cyclic Window Pressure Tests –
ASTM E 1886-02/ASTM E 1996-03, Level C, 4.5lb 2" x 4"
GSA Explosive Test – GSA-TS01-2003




For America Standard, and IWFA requirement 4mil safety film thickness and above is classified as safety film. The safety film must get the ANSI lab report or certificate on the break strength impact before the product can be release in to USA market. Further more, safety film now is coated with heat rejection material and become best selling product in Malaysia.

However, never make mistake that safety film is unbreakable. Every safety film has its break strength limited. Raytech 4mil Safety film can support up to 134lb break strength. As professional opinion, we never tell the customer how good is our safety film, even the original Raytech USA safety film just can delay breaking time for 20-30 seconds. Further more, although the safety tinted window has broken, the thief need to make a hole on the tinted window is not easy also. Thus, we got just enough time to try escape and drive the car away. An expect smash-and-grab-thief can grab your things in 2-3 seconds. That why meanwhile they will not try target on the car that tinted with safety film windows. Watch the videos below :


Car without tinted glass.


Car tinted with safety fim.


This post has been edited by Lord Gitsy: Mar 2 2014, 06:22 PM
Heat
post Dec 8 2013, 01:35 AM

New Member
*
Junior Member
10 posts

Joined: Dec 2012
want to ask those tints selling on groupon for less than RM200 with solar and security worth to buy? some ranging from 5 mil to 8 mil
psycho1
post Dec 8 2013, 01:43 AM

New Member
*
Junior Member
37 posts

Joined: Jan 2009


Is there any lifespan for tint? My v-kool like not so kool anymore after 8years. >.<
Any cheap and legal tint to recomend?
lonely143
post Dec 8 2013, 09:13 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(psycho1 @ Dec 8 2013, 01:43 AM)
Is there any lifespan for tint? My v-kool like not so kool anymore after 8years. >.<
Any cheap and legal tint to recomend?
*
Yes, of course every product have their life span. Its depends on various reason

1. How you take care of it
2. How often you park your car under hot sun
3. How often you use the car
4. How ofter you wind up and down the windows

Basically in my opinion, you are paying RM2000 ++ for V-Kool and it last for 8 years
This is worthy investment tongue.gif

If you want cheap, get it from Groupon or Dealmates but the quality is just below average.
JPJ only allowed >70% VLT for FWS, >50% VLT for side and BWS. Thats consider as legal tint.
finestq
post Dec 8 2013, 11:42 AM

Getting Started
**
Junior Member
158 posts

Joined: Apr 2009


Anybody heard of Johnson film before? My dealer recommended this and according to him, this is from USA...haven't got the quotation though...
Lord Gitsy
post Dec 8 2013, 01:15 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(guardians @ Dec 5 2013, 11:51 AM)
Need some advice here. Thanks.

1. Is there any big difference between security film of 5mil and 7mil?
2. Does thicker security film affect the power window's life span?
*
According to IWFA, Safety film ranges in thickness 4 mils to upwards of 21 mils and thicker. Somehow, for automobile window use is recommend between 4mil to 6mil thickness. Window film above 6mil may cause disrupt to your power window in 1-2 years time. Some car manufacturer already facing this problem few years ago and only experience shop will aware of this issue.

However we find a lot of shop offering 4-5mil thickness safety film to customer, but they tell the customer is 6-8mil. Guys, thicker safety film is not the selling point, laboratory on physical performance of safety film is the selling point.

In theory, 7mil thickness film provides slightly better smash resistance compare to 5mil, infact it is not much different in safety performance and costing. In Malaysia, safety film come with solar control performance. The different of price is normally due to different heat rejection. According to Raytech report, the metal/ ceramic coating on the film for heat rejection performance is so expensive in USA, on the other hand, the costing for the thickness of the film between 4-7mil is about the same.

This post has been edited by Lord Gitsy: Mar 2 2014, 06:13 PM
goedemorgen
post Dec 9 2013, 01:20 AM

New Member
*
Junior Member
45 posts

Joined: Dec 2013
So is Raytech good? Where are raytech films from?

QUOTE(finestq @ Dec 8 2013, 11:42 AM)
Anybody heard of Johnson film before? My dealer recommended this and according to him, this is from USA...haven't got the quotation though...
*
A lot of brands also claim they are from US, but don't know which can trust.

guardians
post Dec 9 2013, 01:17 PM

Getting Started
**
Junior Member
73 posts

Joined: Jan 2010
Anybody have heard of Protech brand??
Lord Gitsy
post Dec 9 2013, 10:25 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(goedemorgen @ Dec 9 2013, 01:20 AM)
So is Raytech good? Where are raytech films from?
A lot of brands also claim they are from US, but don't know which can trust.
*
Raytech Window Film is special develop from Commonwealth Laminating and Coating, Inc. Virginia, USA.
http://www.commonwealthlaminating.com/Locate.aspx
lewiszen
post Dec 9 2013, 11:33 PM

Getting Started
**
Junior Member
116 posts

Joined: Mar 2011
Can anyone post pic of car with Llumar Crystal 6?
goedemorgen
post Dec 10 2013, 01:50 AM

New Member
*
Junior Member
45 posts

Joined: Dec 2013
QUOTE(Lord Gitsy @ Dec 9 2013, 10:25 PM)
Raytech Window Film is special develop from Commonwealth Laminating and Coating, Inc. Virginia, USA.
http://www.commonwealthlaminating.com/Locate.aspx
*
How come a lot of brands offer VLT <60% only and still JPJ compliant?
A lot of cars come with factory glass that has about 75% VLT already. If tint side window with 60% VLT tint also will become illegal right? 0.75 * 0.6 = 0.45 which is less than 50% VLT allowed by JPJ.

So far based on my survey only 3M can offer 66% VLT security tint for side windows and 68%% VLT for back wind shield, with good IRR.

Front wind shield totally cannot tint, any tint found on the market will it <70% VLT.

Edit: Just found out VKOOL also has tint similar to 3M but only the top range ones.

This post has been edited by goedemorgen: Dec 10 2013, 02:05 AM
Jeff_lwh
post Dec 10 2013, 12:37 PM

Getting Started
**
Junior Member
294 posts

Joined: Jun 2005
From: Sec. 17, PJ / Cheras


After following and reading this thread since V1 Pg. 60 onwards. My 2 cents on top 3 BEST Tint in No particular order.

1) Huper Optik C70 front and Back and C40 side

2) Raytech Centurion 4 mil OR 6 mil.
Budget Alternative CS85 5 mil. OR CS75 4 mil.
- 7 years warranty is a Bonus. They have Complete range to suit your budget.

3) 3M Nano 70S with Crystalline 70 front.

OTHER Brand/tint?
Proceed with caution. Avoid Groupon/Webuy/Ilovediscounts tints as they have Hidden costs or they will MAKE you upgrade for better quality tint. One customer ended up paying RM688 instead of RM288 cause is D-segment car and sweet-talked to upgrade to Higher quality IRR tint). Good thing no cheap.

These above 3's ENDORSED and Highly recommended by my Customers. (I sell new cars). V-kool standard dropped and COST very high. Llumar is Good but MANY Imitations.


TSmomo-sang
post Dec 10 2013, 02:56 PM

Getting Started
**
Junior Member
217 posts

Joined: Jan 2003
From: Kuala Lumpur



QUOTE
After following and reading this thread since V1 Pg. 60 onwards. My 2 cents on top 3 BEST Tint in No particular order.

1) Huper Optik C70 front and Back and C40 side

2) Raytech Centurion 4 mil OR 6 mil.
Budget Alternative CS85 5 mil. OR CS75 4 mil.
- 7 years warranty is a Bonus. They have Complete range to suit your budget.

3) 3M Nano 70S with Crystalline 70 front.

OTHER Brand/tint?
Proceed with caution. Avoid Groupon/Webuy/Ilovediscounts tints as they have Hidden costs or they will MAKE you upgrade for better quality tint. One customer ended up paying RM688 instead of RM288 cause is D-segment car and sweet-talked to upgrade to Higher quality IRR tint). Good thing no cheap.

These above 3's ENDORSED and Highly recommended by my Customers. (I sell new cars). V-kool standard dropped and COST very high. Llumar is Good but MANY Imitations.


rclxms.gif Agree with this! rclxms.gif
fairus_wa
post Dec 10 2013, 08:37 PM

New Member
*
Junior Member
4 posts

Joined: Jun 2008


Hai all...wanted help from u guys to recommend few shops in melaka with reputable service track records for tinting...

Thanks...

P/s: sorry dont have the time to dig all the previous post or recommendations especially from V1 smile.gif tongue.gif

lonely143
post Dec 10 2013, 08:50 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Jeff_lwh @ Dec 10 2013, 12:37 PM)
After following and reading this thread since V1 Pg. 60 onwards.  My 2 cents on top 3 BEST Tint in No particular order. 

1) Huper Optik C70 front and Back and C40 side

2) Raytech Centurion 4 mil OR 6 mil. 
Budget Alternative CS85 5 mil. OR CS75 4 mil.
- 7 years warranty is a Bonus.  They have Complete range to suit your budget.

3) 3M Nano 70S with Crystalline 70 front.

OTHER Brand/tint? 
Proceed with caution. Avoid Groupon/Webuy/Ilovediscounts tints as they have Hidden costs or they will MAKE you upgrade for better quality tint.  One customer ended up paying RM688 instead of RM288 cause is D-segment car and sweet-talked to upgrade to Higher quality IRR tint).  Good thing no cheap.

  These above 3's ENDORSED and Highly recommended by my Customers.  (I sell new cars).  V-kool standard dropped and COST very high.  Llumar is Good but MANY Imitations.
*
I understand VKool cost very high as well. One of the reason most SA do not promote not due to low standard of our film. It just that the commission margin for them is low tongue.gif

This post has been edited by lonely143: Dec 10 2013, 08:50 PM
lonely143
post Dec 10 2013, 08:53 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(goedemorgen @ Dec 10 2013, 01:50 AM)
How come a lot of brands offer VLT <60% only and still JPJ compliant?
A lot of cars come with factory glass that has about 75% VLT already. If tint side window with 60% VLT tint also will become illegal right? 0.75 * 0.6 = 0.45 which is less than 50% VLT allowed by JPJ.

So far based on my survey only 3M can offer 66% VLT security tint for side windows and 68%% VLT for back wind shield, with good IRR.

Front wind shield totally cannot tint, any tint found on the market will it <70% VLT.

Edit: Just found out VKOOL also has tint similar to 3M but only the top range ones.
*
Again, we normally cover JPJ if our film VLT is within their rules.
The only troublesome is the PUSPAKOM
ralyon
post Dec 10 2013, 09:31 PM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(lonely143 @ Dec 10 2013, 08:53 PM)
Again, we normally cover JPJ if our film VLT is within their rules.
The only troublesome is the PUSPAKOM
*
Any film that is JPJ compliant could still fail test in Puspakom?

This post has been edited by ralyon: Dec 10 2013, 09:34 PM
lonely143
post Dec 10 2013, 10:05 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(ralyon @ Dec 10 2013, 09:31 PM)
Any film that is JPJ compliant could still fail test in Puspakom?
*
The example already highlighted by goedemorgen
ralyon
post Dec 10 2013, 11:39 PM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(lonely143 @ Dec 10 2013, 10:05 PM)
The example already highlighted by goedemorgen
*
I see.

Guys, anyone using Huper Optik C70 (IRR 91%) for front windscreen facing smart tag issue?
shaguarbb
post Dec 11 2013, 11:14 AM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(ralyon @ Dec 10 2013, 11:39 PM)
I see.

Guys, anyone using Huper Optik C70 (IRR 91%) for front windscreen facing smart tag issue?
*
Don't worry bro... C70 never have issue for Smart Tag, GPS signal or Autogate Sensor rclxms.gif
terabite
post Dec 11 2013, 02:08 PM

New Member
*
Junior Member
5 posts

Joined: Sep 2010
My SA told me that latest Vkool Elite now comes with security feature too, other than heat rejection. This is the "latest" version of Vkool Elite. Anyone can confirm if this is true?

Thanks for any response.

This post has been edited by terabite: Dec 11 2013, 02:09 PM
lonely143
post Dec 12 2013, 02:20 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(terabite @ Dec 11 2013, 02:08 PM)
My SA told me that latest Vkool Elite now comes with security feature too, other than heat rejection. This is the "latest" version of Vkool Elite. Anyone can confirm if this is true?

Thanks for any response.
*
Yes, VKool Premier 6Mil. Just launch it 3 months ago
Ambang2
post Dec 12 2013, 07:11 AM

Getting Started
**
Junior Member
267 posts

Joined: Jan 2011
What u guys think about Illumar? I got an offer RM 1.1K 4 mil full tinted for c-segment car, is it good?
ralyon
post Dec 12 2013, 07:47 AM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


Wow, 1.1k for Llumar is cheap. Which Llumar films are you getting?
czlee88
post Dec 12 2013, 09:48 AM

Getting Started
**
Junior Member
100 posts

Joined: Jan 2008


any suggestion for security film?
thanks
guardians
post Dec 12 2013, 12:10 PM

Getting Started
**
Junior Member
73 posts

Joined: Jan 2010
Hi, have anyone heard of the brand Protech tinting??
Kanuki
post Dec 12 2013, 12:24 PM

Getting Started
**
Junior Member
123 posts

Joined: Jun 2005


QUOTE(guardians @ Dec 12 2013, 12:10 PM)
Hi, have anyone heard of the brand Protech tinting??
*
Nope... I heard only Protech Badminton Shuttlecock.
Maybe same company hahaha....

MonkeyDSoul
post Dec 13 2013, 12:15 AM

New Member
*
Junior Member
29 posts

Joined: Jul 2013


Hi, can anyone give review on RhinePro XD3 Security + Solar Tint?
dinozilla
post Dec 14 2013, 11:04 AM

Regular
******
Senior Member
1,680 posts

Joined: Jan 2003
From: Cyberjaya


Anyone can recommend what option could have for current myvi 1.3?
Don need top notch IRR, medium range would ok
But prefer solar+security
Budget around 1k
terabite
post Dec 14 2013, 11:16 PM

New Member
*
Junior Member
5 posts

Joined: Sep 2010
QUOTE(lonely143 @ Dec 12 2013, 02:20 AM)
Yes, VKool Premier 6Mil. Just launch it 3 months ago
*
Thanks for your reply.

May I know whether Vkool Premier 6mil heat rejection is as good as Vkool Elite?
hanvetan
post Dec 14 2013, 11:26 PM

New Member
*
Newbie
1 posts

Joined: Oct 2013
I just bought my car recently in Balakong and looking for a good safety film, my salesman quoted me some 3M tinted range RM1000 to RM1800 after discount. She told me is 3M original product and giving me 3M warranty card. So, I secretly took down some pictures for survey later. Somehow, when I visit few other 3M shops, those shop people could not recognize the products I show them, they told me is not 3M film, and later when i check online, I noticed the 3M safety film available in their website is only Scotchshiled, Nano 50 and nano 70. I can't find those products in my photo. Could anybody tell me what is this about.

user posted image

Image of 3M website products comparison.

user posted image
ralyon
post Dec 15 2013, 01:51 AM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(hanvetan @ Dec 14 2013, 11:26 PM)
I just bought my car recently in Balakong and looking for a good safety film, my salesman quoted me some 3M tinted range RM1000 to RM1800 after discount. She told me is 3M original product and giving me 3M warranty card. So, I secretly took down some pictures for survey later. Somehow, when I visit few other 3M shops, those shop people could not recognize the products I show them, they told me is not 3M film, and later when i check online, I noticed the 3M safety film available in their website is only Scotchshiled, Nano 50 and nano 70. I can't find those products in my photo. Could anybody tell me what is this about.

user posted image

Image of 3M website products comparison.

user posted image
*
Probably they apply one layer of CR70 plus another layer of 6mil security film. It's better to get Nano 70, 2 layers potentially has more problem.
Just go to one of the 3M authorized applicators listed on 3M website, you can get Crystalline Front and back and Nano for side at around the same price. Also 3M now sending e-warranty via email, not card anymore.

This post has been edited by ralyon: Dec 15 2013, 01:56 AM
kaiwoon
post Dec 15 2013, 03:57 PM

Getting Started
**
Junior Member
92 posts

Joined: Nov 2009
Hi guys,
I looking for those budget tinted in groupon deal.

Is there big difference between 60% vs 80 % of Infrared heat rejected?




cwd8769
post Dec 15 2013, 08:16 PM

Scott
*****
Senior Member
927 posts

Joined: Dec 2006


Hi all sifu, need you all help me to choose a good tint for my honda civic fd1.

1. Long lasting (8-10 years)
2. Good heat rejected
3. Safety tint
4. Dark color (Black), but can meet JPJ requirement

Your opinion will be appreciate

Thanks
hanvetan
post Dec 15 2013, 11:24 PM

New Member
*
Newbie
1 posts

Joined: Oct 2013
QUOTE(ralyon @ Dec 15 2013, 01:51 AM)
Probably they apply one layer of CR70 plus another layer of 6mil security film. It's better to get Nano 70, 2 layers potentially has more problem.
Just go to one of the 3M authorized applicators listed on 3M website, you can get Crystalline Front and back and Nano for side at around the same price. Also 3M now sending e-warranty via email, not card anymore.
*
Hi bro, thx for for your reply. My salesman not mention about the e-warranty at all. But, it is not 2 piece film, see my pictures carefully.Crystalline 50 - 6mil, Crystalline 70 - 6mil, RE70 - 6mil and ST 70 - 5mil is actually one piece of film. After go through some survey, I think that dealer is selling fake 3M to me. I am very disappointed with my salesman and that 3M dealer. I wondering how many 3M dealer is also selling fake 3M product nowaday. Anybody can recommend V-kool, Huper Optilk, or Raytech to me. I am taking my Goft GTI next month. Must be good price and original product.Thx smile.gif
lonely143
post Dec 16 2013, 12:00 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(terabite @ Dec 14 2013, 11:16 PM)
Thanks for your reply.

May I know whether Vkool Premier 6mil heat rejection is as good as Vkool Elite?
*
I would say better than VK Elite
lonely143
post Dec 16 2013, 12:02 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(hanvetan @ Dec 15 2013, 11:24 PM)
Hi bro, thx for for your reply. My salesman not mention about the e-warranty at all. But, it is not 2 piece film, see my  pictures carefully.Crystalline 50 - 6mil, Crystalline 70 - 6mil, RE70 - 6mil and ST 70 - 5mil is actually one piece of film. After go through some survey, I think that dealer is selling fake 3M to me. I am very disappointed with my salesman and that 3M dealer. I wondering how many 3M dealer is also selling fake 3M product nowaday. Anybody can recommend V-kool, Huper Optilk, or Raytech to me. I am taking my Goft GTI next month. Must be good price and original product.Thx smile.gif
*
Please beware, there is a lot fake 3M in the market. As I know 3M do not have safety film.
Their best product is Crystalline series and always have issue with Smart Tag

The safety series that you see might mix with HOME BRAND
ralyon
post Dec 16 2013, 09:13 PM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(hanvetan @ Dec 15 2013, 11:24 PM)
Hi bro, thx for for your reply. My salesman not mention about the e-warranty at all. But, it is not 2 piece film, see my  pictures carefully.Crystalline 50 - 6mil, Crystalline 70 - 6mil, RE70 - 6mil and ST 70 - 5mil is actually one piece of film. After go through some survey, I think that dealer is selling fake 3M to me. I am very disappointed with my salesman and that 3M dealer. I wondering how many 3M dealer is also selling fake 3M product nowaday. Anybody can recommend V-kool, Huper Optilk, or Raytech to me. I am taking my Goft GTI next month. Must be good price and original product.Thx smile.gif
*
I don't know if your 3M dealer is selling fake or not, but based on my survey, when 3M initially launched auto films, they did not have security film, as a result some 3M dealer combine Crystalline 70 with another layer of security film so they are able to sell their product as a full package. However now 3M has Nano series safety film, you can find more information about Nano here:
http://solutions.3m.com.my/wps/portal/3M/e...nge/NanoSafety/
Maybe your SA is just not up to date with the information.

If your dealer is listed in the below webpage, it should be selling genuine product.
http://solutions.3m.com.my/wps/portal/3M/e...me/Contact/WTB/

This post has been edited by ralyon: Dec 16 2013, 09:17 PM
Lord Gitsy
post Dec 17 2013, 04:56 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(hanvetan @ Dec 15 2013, 11:24 PM)
Hi bro, thx for for your reply. My salesman not mention about the e-warranty at all. But, it is not 2 piece film, see my  pictures carefully.Crystalline 50 - 6mil, Crystalline 70 - 6mil, RE70 - 6mil and ST 70 - 5mil is actually one piece of film. After go through some survey, I think that dealer is selling fake 3M to me. I am very disappointed with my salesman and that 3M dealer. I wondering how many 3M dealer is also selling fake 3M product nowaday. Anybody can recommend V-kool, Huper Optilk, or Raytech to me. I am taking my Goft GTI next month. Must be good price and original product.Thx smile.gif
*
OMG!!! Crystalline available in 6mil and got sample film some more. Lol.
It is good for you to do some research online for the product available to make sure you got the right original product. This non-original product we called it "House-brand". House-brand product is everywhere in market, it may happen in all brand, selling like original with expensive price too.

This post has been edited by Lord Gitsy: Dec 17 2013, 04:57 PM
viper1912
post Dec 17 2013, 05:36 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2007
QUOTE(hanvetan @ Dec 15 2013, 11:24 PM)
Hi bro, thx for for your reply. My salesman not mention about the e-warranty at all. But, it is not 2 piece film, see my  pictures carefully.Crystalline 50 - 6mil, Crystalline 70 - 6mil, RE70 - 6mil and ST 70 - 5mil is actually one piece of film. After go through some survey, I think that dealer is selling fake 3M to me. I am very disappointed with my salesman and that 3M dealer. I wondering how many 3M dealer is also selling fake 3M product nowaday. Anybody can recommend V-kool, Huper Optilk, or Raytech to me. I am taking my Goft GTI next month. Must be good price and original product.Thx smile.gif
*
Back in year 2000, 3M already have their auto films. just that not so popular.
They do have security film, scotchshield, this products has been since day one.

About your picture, may be the dealer, using CR70 + other brand security films that what I can see from the picture. I would not rule out that they are still using genueing 3M film just that, they might be using security film which not from 3M.

If you doubt your film autentity, perhaps you can called up 3M customer service 170081 7080. whether the shop you purchase from is their autotheries dealers.

For your info, 3M film do have a marking on their film, expect for Nanos which this security film do not have marking on the film. Althought 3M mentioned about e-warranty but my installer still using normal card based. TO me still accetable due to I know the installer since in year 2000.

This 3M marking to ensure that film you are getting is from 3M.


dadidi
post Dec 18 2013, 12:23 AM

Getting Started
**
Junior Member
56 posts

Joined: Feb 2010
Quality tells them all.

Dun get cheated by name , brand and spec.

If you are seriously looking for high quality tinted USA imported film with special promo price (Ada Lubang)
then only PM me.
yumi17
post Dec 19 2013, 10:16 PM

Getting Started
**
Junior Member
54 posts

Joined: Jul 2007
hey guys, got an offer for Raytech CS 85 at RM1.3k, is it a good deal??
dinozilla
post Dec 20 2013, 10:48 AM

Regular
******
Senior Member
1,680 posts

Joined: Jan 2003
From: Cyberjaya


QUOTE(yumi17 @ Dec 19 2013, 10:16 PM)
hey guys, got an offer for Raytech CS 85 at RM1.3k, is it a good deal??
*
where u got it?
i called raytech tat day for a myvi wit CS75...it says only RRP 1.5 rclxub.gif
ask me come in and can nego.... doh.gif

I will go find a shop this weekend...and see whether later wanna decide raytech not...
yumi17
post Dec 20 2013, 03:26 PM

Getting Started
**
Junior Member
54 posts

Joined: Jul 2007
QUOTE(dinozilla @ Dec 20 2013, 10:48 AM)
where u got it?
i called raytech tat day for a myvi wit CS75...it says only RRP 1.5 rclxub.gif
ask me come in and can nego.... doh.gif

I will go find a shop this weekend...and see whether later wanna decide raytech not...
*
from my SA in setapak...
MontBlancRanger
post Dec 20 2013, 10:01 PM

New Member
*
Newbie
3 posts

Joined: Aug 2013
Tinted my cruze with Raytech for over a year already and so far so good.

Am glad that I've chosen Raytech as I was comparing with other brands like V-kool and 3M that time.

Price is not cheap but that is what you can expect from a reputable brand and good product.

For people who has the budget and looking for a genuine product, i will definitely recommend Raytech....
silverwave
post Dec 20 2013, 11:54 PM

Look at all my stars!!
*******
Senior Member
4,082 posts

Joined: Apr 2006


How about Win Gard? A lot of dealers seem to be recommending this. Is it good?
ultra_nyamuk
post Dec 21 2013, 12:05 AM

Regular
******
Senior Member
1,832 posts

Joined: Dec 2008
QUOTE(yumi17 @ Dec 19 2013, 10:16 PM)
hey guys, got an offer for Raytech CS 85 at RM1.3k, is it a good deal??
*
Pm me where you get this please wink.gif
skin_10
post Dec 22 2013, 03:12 PM

New Member
*
Junior Member
8 posts

Joined: Jan 2010
Hi! May I know for car window tinting=> the film actually apply on one side only (the inner side only) or both side of the glass? blush.gif tongue.gif
lonely143
post Dec 22 2013, 05:47 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(skin_10 @ Dec 22 2013, 03:12 PM)
Hi! May I know for car window tinting=> the film actually apply on one side only (the inner side only) or both side of the glass?  blush.gif  tongue.gif
*
Inner side and only 1 side smile.gif
silverwave
post Dec 24 2013, 04:39 PM

Look at all my stars!!
*******
Senior Member
4,082 posts

Joined: Apr 2006


Anyone tried wingard regal or elite?
cwd8769
post Dec 24 2013, 09:36 PM

Scott
*****
Senior Member
927 posts

Joined: Dec 2006


Can anyone recommend me the 3M tinted shop?
kentooi
post Dec 25 2013, 10:27 AM

New Member
*
Newbie
2 posts

Joined: Mar 2006


Any one heard of PVI tint film?
I got an offer RM1450 for new Civic.
Front and rear is 2m ES75k
Side is safety film 4m es75km(titan)
viper1912
post Dec 26 2013, 08:29 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2007
QUOTE(cwd8769 @ Dec 24 2013, 09:36 PM)
Can anyone recommend me the 3M tinted shop?
*
Try tintworks at Sunway Mas....Look for antoneo

here is the address
http://solutions.3m.com.my/wps/portal/3M/e...me/Contact/WTB/
cwd8769
post Dec 27 2013, 07:36 AM

Scott
*****
Senior Member
927 posts

Joined: Dec 2006


QUOTE(viper1912 @ Dec 26 2013, 08:29 PM)
Try tintworks at Sunway Mas....Look for antoneo

here is the address
http://solutions.3m.com.my/wps/portal/3M/e...me/Contact/WTB/
*
Thanks for your useful link. Do you have huper optic authorize car centers link as well?

This post has been edited by cwd8769: Dec 27 2013, 07:37 AM
goliath
post Dec 27 2013, 08:49 AM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(cwd8769 @ Dec 27 2013, 07:36 AM)
Thanks for your useful link. Do you have huper optic authorize car centers link as well?
*
Google for Smart Window Sdn Bhd
Post-Je-Ape-Ape
post Dec 27 2013, 09:21 AM

Getting Started
**
Junior Member
221 posts

Joined: Dec 2013
QUOTE(silverwave @ Dec 20 2013, 11:54 PM)
How about Win Gard? A lot of dealers seem to be recommending this. Is it good?
*
Yup Win Gard is awesome...
clrtout
post Dec 27 2013, 12:30 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2012
no one talk about ecotint.... sweat.gif

my opinion, brand is one thing...but installation skills/intallation room must be pro too.
if not end up a non happy cust with bad review.
later people come say dat cust is using in house brand or fake products.
paying thousands of ringgit and end up with lousy result is not a good practice.
jackbanner
post Dec 27 2013, 12:35 PM

On my way
****
Senior Member
660 posts

Joined: Jun 2009
I've been using vkool for the past 18 years.
Good about vkool: high heat resistant. One of the best. You dont feel the heat biting your skin.

Bad thing about vkool: After certain period of time, the colour of the tint changes, to the extent that it effect the visibility.

But I like the heat resistant so I tinted my newly bought car windows with vkool last september.


Is there any better car tint in the market?
Answer: I dont know, I have never tried anything else and I dont want to take the risk (of not getting good heat resistant tint) so I used what I knew/have experience with.

This post has been edited by jackbanner: Dec 27 2013, 12:40 PM
silverwave
post Dec 28 2013, 07:39 PM

Look at all my stars!!
*******
Senior Member
4,082 posts

Joined: Apr 2006


QUOTE(Post-Je-Ape-Ape @ Dec 27 2013, 09:21 AM)
Yup Win Gard is awesome...
*
I'm still deciding between Regal and Royale. I know Royale is more towards blue but i'm not too sure about Regal.
silverwave
post Dec 28 2013, 07:39 PM

Look at all my stars!!
*******
Senior Member
4,082 posts

Joined: Apr 2006


removed

This post has been edited by silverwave: Dec 28 2013, 08:16 PM
silverwave
post Dec 28 2013, 07:45 PM

Look at all my stars!!
*******
Senior Member
4,082 posts

Joined: Apr 2006


QUOTE(jackbanner @ Dec 27 2013, 12:35 PM)
I've been using vkool for the past 18 years.
Good about vkool: high heat resistant. One of the best. You dont feel the heat biting your skin.

Bad thing about vkool: After certain period of time, the colour of the tint changes, to the extent that it effect the visibility.

But I like the heat resistant so I tinted my newly bought car windows with vkool last september.
Is there any better car tint in the market?
Answer: I dont know, I have never tried anything else and I dont want to take the risk (of not getting good heat resistant tint) so I used what I knew/have experience with.
*
Well another thing i can add about vkool, it's starts to peel after 8 years. My dad's car side windows were bad and each side costed Rm440 to replace rclxub.gif

With air cool i see 3 tiny bubbles on my rear windscreen after 8 years also.

My sister's swift came with a security tint (part of the premium package with body kit, spoiler and leather seats) and that seems good. I'm not too sure what brand is that but it's good in terms of rejecting the heat.

This post has been edited by silverwave: Dec 28 2013, 08:16 PM
silverwave
post Dec 28 2013, 07:45 PM

Look at all my stars!!
*******
Senior Member
4,082 posts

Joined: Apr 2006


removed

This post has been edited by silverwave: Dec 28 2013, 08:16 PM
zrpx
post Dec 31 2013, 11:47 AM

New Member
*
Junior Member
16 posts

Joined: Dec 2013


Hello guys!

New user of LYN and will be getting a Mazda 6 soon. I have been offered tinting service (prior to delivery - as it appears that there is only one vendor which can do for Mazda before delivery) for a hefty price. The proposed tint is VKool Elite FWS/BWS and Armorcoat for Side Windows.

Anyone able to comment on the price range for the proposed tint? And if I change it to Vkool Elite FWS/BWS and VKool 55 for Side Windows?

Appreciate the help!
one81
post Dec 31 2013, 12:15 PM

Enthusiast
*****
Senior Member
854 posts

Joined: Jul 2010
From: Cheras, Kuala Lumpur


I just get my new car and the salesman offer me for Huper Optik Ceramic C50 Shield - 4 Mil tinted for free... i ask him to install legal tint (JPJ approved)...
» Click to show Spoiler - click again to hide... «


This post has been edited by one81: Jan 2 2014, 09:11 AM
aiman04
post Dec 31 2013, 02:22 PM

THX-Certified Geek
*******
Senior Member
2,316 posts

Joined: Jul 2007


Hi guys, I heard with the new slim Smartag works fine with 3M Crystalline 70. Ay truth to this?

I want to buy the new one, so must make sure it works first otherwise it'll be a waste.

Thanks.
lonely143
post Dec 31 2013, 05:12 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(zrpx @ Dec 31 2013, 11:47 AM)
Hello guys!

New user of LYN and will be getting a Mazda 6 soon. I have been offered tinting service (prior to delivery - as it appears that there is only one vendor which can do for Mazda before delivery) for a hefty price. The proposed tint is VKool Elite FWS/BWS and Armorcoat for Side Windows.

Anyone able to comment on the price range for the proposed tint? And if I change it to Vkool Elite FWS/BWS and VKool 55 for Side Windows?

Appreciate the help!
*
VK Elite + VK 55 is definitely is better than VK + Armorcoat

Pricing - RM 3000 ++ vs RM 2000 ++
Performance - IRR 96% vs IRR 70%
Strength - High Rejection, No Safety vs Low Rejection, Got Safety
rajasiang
post Jan 1 2014, 09:55 PM

New Member
*
Newbie
0 posts

Joined: Feb 2009
QUOTE(clrtout @ Dec 27 2013, 12:30 PM)
no one talk about ecotint....  sweat.gif

my opinion, brand is one thing...but installation skills/intallation room must be pro too.
if not end up a non happy cust with bad review.
later people come say dat cust is using in house brand or fake products.
paying thousands of ringgit and end up with lousy result is not a good practice.
*
My Exora cps May 2010 comes with Ecotint and full of bubbles at rear wind screen mad.gif
lonely143
post Jan 2 2014, 12:23 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(rajasiang @ Jan 1 2014, 09:55 PM)
My Exora cps May 2010 comes with Ecotint and full of bubbles at rear wind screen mad.gif
*
Normally free tint will have this type of problem and
this has ntg to do with workmanship but I think you can go claim warranty
bluetomsguy
post Jan 2 2014, 12:30 AM

Casual
***
Junior Member
321 posts

Joined: Dec 2009
anyone heard of Agard ?
aiman04
post Jan 2 2014, 07:04 AM

THX-Certified Geek
*******
Senior Member
2,316 posts

Joined: Jul 2007


QUOTE(aiman04 @ Dec 31 2013, 02:22 PM)
Hi guys, I heard with the new slim Smartag works fine with 3M Crystalline 70. Ay truth to this?

I want to buy the new one, so must make sure it works first otherwise it'll be a waste.

Thanks.
*
Bought and tested the new slim Smartag, it works fine. No more Smartag issues with 3M Crystalline then. So if anyone wants to tint their front with 3M Crystalline 70 just go ahead everything works like a charm.

Just a note, I almost tinted my car with Llumar but canceled because AVS70 has been discontinued and there is no alternative film with similar specs. According to the manager the AVS70 has been discontinued due to oxidation issues, discoloring, etc because of the metal used in the film.
clrtout
post Jan 2 2014, 02:15 PM

New Member
*
Junior Member
11 posts

Joined: Jan 2012
QUOTE(rajasiang @ Jan 1 2014, 10:55 PM)
My Exora cps May 2010 comes with Ecotint and full of bubbles at rear wind screen mad.gif
*
QUOTE(lonely143 @ Jan 2 2014, 01:23 AM)
Normally free tint will have this type of problem and
this has ntg to do with workmanship but I think you can go claim warranty
*
i agree with lonely143.
go claim warranty, or can lodge a complaint thru ecotint website.

btw, my preve comes with ecotint too.
hopefully i wont be facing bubbles issue... sweat.gif
Jnkm13
post Jan 2 2014, 02:59 PM

Getting Started
**
Junior Member
287 posts

Joined: Jun 2011
I just had my Evoque tinted at Raytech SS2. 5mil Security film. Must say the service and follow up was excellent. It's not cheap, but worth the price.
KuroN3ko
post Jan 3 2014, 01:38 PM

New Member
*
Newbie
0 posts

Joined: Jun 2007
Hi anyone gave experience regarding Panoramic window tint? Quoted 950 for bws sws and fws for my Ford Focus, 7 years warranty. Apparently its a US brand.
tanec2013
post Jan 3 2014, 02:52 PM

New Member
*
Newbie
0 posts

Joined: Dec 2013


Had my Jazz CKD petrol tinted with Raytech Centurion 6-mil with 7 years warranty. It's a combination of solar and security film. So far so good. M a happy and satisfied onwer. Price RM2.5k.
tintspecialist123
post Jan 4 2014, 06:47 PM

New Member
*
Newbie
0 posts

Joined: Dec 2013


Found this interesting video on youtube.

This post has been edited by tintspecialist123: Jan 4 2014, 06:52 PM
Lord Gitsy
post Jan 5 2014, 03:22 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(KuroN3ko @ Jan 3 2014, 01:38 PM)
Hi anyone gave experience regarding Panoramic window tint? Quoted 950 for bws sws and fws for my Ford Focus, 7 years warranty. Apparently its a US brand.
*
Hi Bro, Panaramic is one of the product of Solar Gard brand. Solar Gard is USA Brand, somehow Panaramic is not the brand. Just like "Focus" is one of the model of "Ford". Somehow, for my experience, never heard about Panaramic before, the only shop carry "Solar Gard" brand in Malaysia in only "Tint Shop".

In Malaysia, there is many local brand name same with USA brand but the trademark logo totally different and the company is different also.
we heard about "Suntec" close to USA Suntek, "Solar Gard" same with USA "Solar Gard" name, but different trademark logo.

Just be careful of what yo choose.


Ambang2
post Jan 5 2014, 06:19 PM

Getting Started
**
Junior Member
267 posts

Joined: Jan 2011
Why no one recommend sahara x?

I read their website n very impress with their high IRR with reasonable price. Moreover, it is a safety film as well.
yeahh
post Jan 7 2014, 12:57 PM

Not enough stars :(
******
Senior Member
1,715 posts

Joined: Jan 2003
From: Selangor


QUOTE(aiman04 @ Jan 2 2014, 07:04 AM)
Bought and tested the new slim Smartag, it works fine. No more Smartag issues with 3M Crystalline then. So if anyone wants to tint their front with 3M Crystalline 70 just go ahead everything works like a charm.

Just a note, I almost tinted my car with Llumar but canceled because AVS70 has been discontinued and there is no alternative film with similar specs. According to the manager the AVS70 has been discontinued due to oxidation issues, discoloring, etc because of the metal used in the film.
*
i went and got the new slim smart tag based on ur comments
haha

yes it works smile.gif
mits27
post Jan 7 2014, 05:28 PM

Getting Started
**
Junior Member
62 posts

Joined: Jan 2010
QUOTE(ralyon @ Dec 15 2013, 01:51 AM)
Probably they apply one layer of CR70 plus another layer of 6mil security film. It's better to get Nano 70, 2 layers potentially has more problem.
Just go to one of the 3M authorized applicators listed on 3M website, you can get Crystalline Front and back and Nano for side at around the same price. Also 3M now sending e-warranty via email, not card anymore.
*
As far I know some 3M dealer don't sell the old security film anymore, only Scotchshield, Nano 40s, and Nano 70s. Scotchshield is 4mil and Nano 40s and 70s is 3mil. Btw, I also looking for Crystalline 70 for front and rear and Nano 40s for side. Nano 70s is too light with 66% VLT and Scotchshield TSER is really low.
Pilote
post Jan 7 2014, 11:21 PM

New Member
*
Junior Member
17 posts

Joined: Nov 2010


Tinted Crystalline CR 70 front & CR 60 back. Side Nano70. No change to evaluate its performance yet because night already. Tomorrow see how it's performance.

When removed my old tint I asked them to check with the 3 m gadget and found the IRR is very low compare to what they advertised. They even claimed it's Japan nano ceramic technology. Wasted time & money with the in house brand. Very unscrupulous tint shop.
AlfredKoh
post Jan 7 2014, 11:26 PM

Getting Started
**
Junior Member
154 posts

Joined: Jan 2008
Hi all, anyone know or done tinting purple reflective tinted on your car? I have seen a few cars stick dark purple or normal purple with reflective effect which means cannot look inside. Anyone know where can it be done and how much? i already have 1 layer tinted, so i just want it as color effect. Please advice.
ariefamron
post Jan 8 2014, 03:52 PM

New Member
*
Junior Member
8 posts

Joined: Dec 2005


Dear forumers,

This is a long overdue feedback after I installed my Starex with Raytech tint.

I was in between v-kool and raytech. I used Raytech before for my Kia Forte, had no issues about it except I remember I spent almost 3k for it.

So, I checked out both v-kool and raytech, test once and twice. Bring home minister and she tested too. Finally I decided with Raytech mainly because of the offer that they gave me. Really worth the money.

I took the Ultra 70 for the front windshield and Centurion 6 mil for all other windows. Performance wise I loved it. Went to Mersing and felt cool despite I was traveling during the hot afternoon. Interestingly I didn't feel my pants heating up while driving smile.gif)

Will I return if I buy a new car, u bet I will.

Thanks to bro Shawn.
AlfredKoh
post Jan 8 2014, 07:53 PM

Getting Started
**
Junior Member
154 posts

Joined: Jan 2008
QUOTE(AlfredKoh @ Jan 7 2014, 11:26 PM)
Hi all, anyone know or done tinting purple reflective tinted on your car? I have seen a few cars stick dark purple or normal purple with reflective effect which means cannot look inside. Anyone know where can it be done and how much? i already have 1 layer tinted, so i just want it as color effect. Please advice.
*
anyone knows about purple color tint film ?
ralyon
post Jan 9 2014, 11:46 AM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(mits27 @ Jan 7 2014, 05:28 PM)
As far I know some 3M dealer don't sell the old security film anymore, only Scotchshield, Nano 40s, and Nano 70s. Scotchshield is 4mil and Nano 40s and 70s is 3mil. Btw, I also looking for Crystalline 70 for front and rear and Nano 40s for side. Nano 70s is too light with 66% VLT and Scotchshield TSER is really low.
*
I chose Nano 70s because without tint, the window glass itself is not 100% VLT, and in order to comply with JPJ rules, one should not get tint with exactly 50% VLT.

mozambique
post Jan 9 2014, 12:59 PM

New Member
*
Newbie
1 posts

Joined: Jul 2012


Anyone has experience with LLumar Jalan Ipoh/ Shelter Tints Gallery? How is their workmanship?

Tq in advance..
mozambique
post Jan 9 2014, 04:57 PM

New Member
*
Newbie
1 posts

Joined: Jul 2012


QUOTE(ariefamron @ Jan 8 2014, 03:52 PM)
Dear forumers,

This is a long overdue feedback after I installed my Starex with Raytech tint.

I was in between v-kool and raytech. I used Raytech before for my Kia Forte, had no issues about it except I remember I spent almost 3k for it.

So, I checked out both v-kool and raytech, test once and twice. Bring home minister and she tested too. Finally I decided with Raytech mainly because of the offer that they gave me. Really worth the money.

I took the Ultra 70 for the front windshield and Centurion 6 mil for all other windows. Performance wise I loved it. Went to Mersing and felt cool despite I was traveling during the hot afternoon. Interestingly I didn't feel my pants heating up while driving smile.gif)

Will I return if I buy a new car, u bet I will.

Thanks to bro Shawn.
*
Hi ariefamron,

May I know how much did you pay for it and also where is the shop?

Thank you in advance..
lonely143
post Jan 9 2014, 05:22 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(AlfredKoh @ Jan 8 2014, 07:53 PM)
anyone knows about purple color tint film ?
*
You can find the film at car accessories shop. I think the price is cheap too.

Your 1st layer film warranty will definitely void.
As for the film, I expect the color will fade after 1 or 2 year

This post has been edited by lonely143: Jan 9 2014, 05:23 PM
jex-koi
post Jan 9 2014, 05:47 PM

Getting Started
**
Junior Member
273 posts

Joined: Feb 2007
QUOTE(mozambique @ Jan 9 2014, 12:59 PM)
Anyone has experience with LLumar Jalan Ipoh/ Shelter Tints Gallery? How is their workmanship?

Tq in advance..
*
Based on my 3M experience, the staff moves around the shops. They are not fixed. So, the staff fixing it at this shop, may be the same as the staff fixing the tint at another shop.

Anyway, for 3M, their workmanship is terrible. Good tint though...
mozambique
post Jan 9 2014, 06:26 PM

New Member
*
Newbie
1 posts

Joined: Jul 2012


QUOTE(jex-koi @ Jan 9 2014, 05:47 PM)
Based on my 3M experience, the staff moves around the shops. They are not fixed. So, the staff fixing it at this shop, may be the same as the staff fixing the tint at another shop.

Anyway, for 3M, their workmanship is terrible. Good tint though...
*
Thanks for the reply.. biggrin.gif
tintspecialist123
post Jan 9 2014, 06:29 PM

New Member
*
Newbie
0 posts

Joined: Dec 2013
QUOTE(Ambang2 @ Jan 5 2014, 06:19 PM)
Why no one recommend sahara x?

I read their website n very impress with their high IRR with reasonable price. Moreover, it is a safety film as well.
*
Have you check out HUPER OPTIC. Extremely good tint.

Web: http://www.smartwindow.com.my/huper-optik.html

thumbup.gif thumbup.gif thumbup.gif
Kenneth Thien
post Jan 10 2014, 12:06 AM

New Member
*
Junior Member
13 posts

Joined: Sep 2009


Hi guys, I'm new in tinting... I getting my nissan Serena next week... The car sales man give me offer rm2400 v-cool... He said not v-kool elite but better than v-kool armorcoat... So I don't know which model of v-kool...
Do u guys think is it genuine ?

Need u guys professional to help...thx
lonely143
post Jan 10 2014, 12:44 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Kenneth Thien @ Jan 10 2014, 12:06 AM)
Hi guys, I'm new in tinting... I getting my nissan Serena next week... The car sales man give me offer rm2400 v-cool... He said not v-kool elite but better than v-kool armorcoat... So I don't know which model of v-kool...
Do u guys think is it genuine ?

Need u guys professional to help...thx
*
Ask him exactly what is the product name!
As price list for your reference

VK Elite
RM 3400

VK Armorcoat
RM 2950

VK Windowshield
RM 3300
Kenneth Thien
post Jan 10 2014, 01:41 AM

New Member
*
Junior Member
13 posts

Joined: Sep 2009


QUOTE(lonely143 @ Jan 10 2014, 12:44 AM)
Ask him exactly what is the product name!
As price list for your reference

VK Elite
RM 3400

VK Armorcoat
RM 2950

VK Windowshield
RM 3300
*
Thx for the info bro... Will ask him tmrw....
Mr_47
post Jan 10 2014, 04:39 PM

***NOT MODERATOR *** Post : +10,000,000,00 Warn: 100%
*******
Senior Member
4,337 posts

Joined: Jan 2003
From: Bora-bora u jelly? Special: Age of multi-monitor



solar chepo tint front 2 mil and side hammer bulletproove 8mil la groupon brader. owned all
mozambique
post Jan 10 2014, 04:41 PM

New Member
*
Newbie
1 posts

Joined: Jul 2012


QUOTE(Mr_47 @ Jan 10 2014, 04:39 PM)
solar chepo tint front 2 mil and side hammer bulletproove 8mil la groupon brader. owned all
*
What r u trying to say? rclxub.gif
winkiedilwy
post Jan 11 2014, 09:27 PM

Imma farting carrots.
*******
Senior Member
2,343 posts

Joined: Oct 2010
From: Place known for existence of men.


Hey guys, anything to take note before sending car for tinting? Mine is a 2007 Toyota Camry. Is it able to do full tint with mid-range specs for under 1k? Because car is old now, probably selling it off within a year or two. Tinting is a must do because the rear window's tint is quite ruined (Right Cool) and it's about 6+ years. Car recently got a new coat of paint and replacing the tints will make the car look a lot nicer. Any advices, sifu?
lonely143
post Jan 11 2014, 10:23 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(winkiedilwy @ Jan 11 2014, 09:27 PM)
Hey guys, anything to take note before sending car for tinting? Mine is a 2007 Toyota Camry. Is it able to do full tint with mid-range specs for under 1k? Because car is old now, probably selling it off within a year or two. Tinting is a must do because the rear window's tint is quite ruined (Right Cool) and it's about 6+ years. Car recently got a new coat of paint and replacing the tints will make the car look a lot nicer. Any advices, sifu?
*
You can look mid range at groupon.
Please be aware that your back windscreen demister might come off when try to remove the tint
winkiedilwy
post Jan 11 2014, 11:11 PM

Imma farting carrots.
*******
Senior Member
2,343 posts

Joined: Oct 2010
From: Place known for existence of men.


QUOTE(lonely143 @ Jan 11 2014, 10:23 PM)
You can look mid range at groupon.
Please be aware that your back windscreen demister might come off when try to remove the tint
*
and the stereo antenna is also built in like the demister as well.

so what I need to warn the guys to remove and do my tint?
lonely143
post Jan 12 2014, 01:58 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(winkiedilwy @ Jan 11 2014, 11:11 PM)
and the stereo antenna is also built in like the demister as well.

so what I need to warn the guys to remove and do my tint?
*
Its like betting on "Big & Small" depends the technician skill to remove the old film.
If you have insurance cover for windscreen then is good biggrin.gif
Lord Gitsy
post Jan 12 2014, 10:27 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(winkiedilwy @ Jan 11 2014, 09:27 PM)
Hey guys, anything to take note before sending car for tinting? Mine is a 2007 Toyota Camry. Is it able to do full tint with mid-range specs for under 1k? Because car is old now, probably selling it off within a year or two. Tinting is a must do because the rear window's tint is quite ruined (Right Cool) and it's about 6+ years. Car recently got a new coat of paint and replacing the tints will make the car look a lot nicer. Any advices, sifu?
*
Hi bro, remove and retint in all window is not an issue, but only there is a risk for remove previous film on the demister especially for car above 5 years. I can tell you we have many experience in handling this kind of matter, we have special treatment before take off the old film to minimize the damage on the demister line. However, we still tell our customer up front, we can't promise on the demister will not peel off.
shauyan
post Jan 12 2014, 10:37 AM

Getting Started
**
Junior Member
178 posts

Joined: Sep 2007
QUOTE(ralyon @ Jan 9 2014, 11:46 AM)
I chose Nano 70s because without tint, the window glass itself is not 100% VLT, and in order to comply with JPJ rules, one should not get tint with exactly 50% VLT.
*
I am with C70 for front and nano70s at side. The heat rejection is not as per my expectation.
My friend with nano40s i can feel the different. Of course on paper, the heat rejection for nano40s already more.
If i have choice again, i will choose C50 on side and forget about the safety tint
ralyon
post Jan 12 2014, 03:04 PM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(shauyan @ Jan 12 2014, 10:37 AM)
I am with C70 for front and nano70s at side. The heat rejection is not as per my expectation.
My friend with nano40s i can feel the different. Of course on paper, the heat rejection for nano40s already more.
If i have choice again, i will choose C50 on side and forget about the safety tint
*
Of course darker tint = more heat rejection, but you can always use sun shade to block more visible light from side window and so far JPJ didn't say we cannot use sun shade with very low VLT.
Lord Gitsy
post Jan 12 2014, 09:39 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


Hi guys and gals, just an information to everybody regarding Raytech Window Film. We provide professional consultant service and few testing method to our customer. I am happy to know that Raytech also start provide EDTM brand, solar meter testing on our product to ensure customer getting Raytech genuine product and test the film performance before installation. As Raytech products are special developed in CLC, Virginia USA to overcome the extreme weather in Malaysia, you guys will be surprise to find out the testing result of Ultra 70 and Centurion Series.
ariefamron
post Jan 13 2014, 11:55 AM

New Member
*
Junior Member
8 posts

Joined: Dec 2005


QUOTE(mozambique @ Jan 9 2014, 04:57 PM)
Hi ariefamron,

May I know how much did you pay for it and also where is the shop?

Thank you in advance..
*
Can't remember but gimme some time and I will check my receipt.

The place is at Raytech near Jalan Cheras -

Raytech Tinting @ Cheras. No.18, Ground Floor, Jalan 4/93A, Warisan City View, Off Batu 2 1/2, Jalan Cheras, 56100 Kuala Lumpur. Tel : +603 – 9286 3996

Cheers.
mozambique
post Jan 13 2014, 12:50 PM

New Member
*
Newbie
1 posts

Joined: Jul 2012


QUOTE(ariefamron @ Jan 13 2014, 11:55 AM)
Can't remember but gimme some time and I will check my receipt.

The place is at Raytech near Jalan Cheras -

Raytech Tinting @ Cheras. No.18, Ground Floor, Jalan 4/93A, Warisan City View, Off Batu 2 1/2, Jalan Cheras, 56100 Kuala Lumpur. Tel : +603 – 9286 3996

Cheers.
*
Hi ariefamron,

Mine is the same shop too.

You can pm me how much they quoted you. And also your review in terms of heat rejection.

Tq again.. smile.gif


slim117
post Jan 13 2014, 01:33 PM

New Member
*
Newbie
0 posts

Joined: Jan 2014
Hi all, Just need some help on tinting..

Anyone heard of speedycool? Planning to get a Honda Jazz and that was offered at a discount by the honda dealership I was at.

If i remembered correctly, It was worth RM700 but discounted to RM500. Meaning most likely it would be a low spec one.

How much more would i pay for an established brand such as 3M, Raytech for along that similar spec for a Jazz?

Thanks.
ahben00
post Jan 13 2014, 05:47 PM

New Member
*
Junior Member
9 posts

Joined: Jan 2014
Good day Sifus,

Pls advise if this is good pkg
3m ceramic rm1600
Full crystalline rm2000
Re crystalline rm rm1950

For SUV like cx5

Thanks
slim117
post Jan 14 2014, 10:48 AM

New Member
*
Newbie
0 posts

Joined: Jan 2014
Is this a good deal? Anyone been to this place before?

http://www.groupon.my/deals/klang-valley-s...-Safe-717936117


feifei8899
post Jan 14 2014, 03:06 PM

New Member
*
Newbie
0 posts

Joined: Jan 2014
Dear member

Agard 695 for elantra RM 1650
Is it worth??
Wat the best price should be. Can got to 1k?
Thx ya
kelvyn
post Jan 14 2014, 05:18 PM

Look at all my stars!!
*******
Senior Member
3,173 posts

Joined: May 2007
Hi guys,
My rear windscreen's tint needs to be replace. Bubbles starting to appear after few years.
How much to replace just for the rear? Would prefer one that can really cut out the heat.... Huper, 3M,etc
rajasiang
post Jan 15 2014, 12:15 AM

New Member
*
Newbie
0 posts

Joined: Feb 2009
QUOTE(tintspecialist123 @ Jan 9 2014, 06:29 PM)
Have you check out HUPER OPTIC. Extremely good tint.

Web: http://www.smartwindow.com.my/huper-optik.html

thumbup.gif  thumbup.gif  thumbup.gif
*
Hi Tintspecialist123,

I had paid deposit for HO tint (FWS C70 & Windows C50 Shield 4mil) and will be doing it on 16 Jan for my Picanto,
The shop is listed under SmartWindow as a dealer. How do I know its genuine HO tint? hmm.gif

Thanks,

This post has been edited by rajasiang: Jan 15 2014, 12:35 AM
00king00
post Jan 15 2014, 12:39 AM

Touge!
****
Senior Member
698 posts

Joined: Jan 2009
From: Mount Akina


Hello guys, I need advice.

I'm currently a student, college parking always under hot sun. Finding car tint for my proton waja...

What kind of film u guys recommend? I don't need safety type as long as can reduce heat is good enough already. Been searching for the net quite a long time but still scare cheap tint affect body health.




starmexx
post Jan 15 2014, 03:15 PM

New Member
*
Junior Member
11 posts

Joined: Aug 2013
QUOTE(Lord Gitsy @ Jan 12 2014, 09:39 PM)
Hi guys and gals, just an information to everybody regarding Raytech Window Film. We provide professional consultant service and few testing method to our customer. I am happy to know that Raytech also start provide EDTM brand, solar meter testing on our product to ensure customer getting Raytech  genuine product and test the film performance before installation. As Raytech products are special developed in CLC, Virginia USA to overcome the extreme weather in Malaysia, you guys will be surprise to find out the testing result of Ultra 70 and Centurion Series.
*
Hi Lord Gitsy, tinted my F30 with RAYTECH, remember me? Very impress with the performance, a lot better than the V-Kool elite tinted on my wife's Honda Civic.

Anyway, my brother just bought the new F10 and I suggested Raytech to him. Any special price?? Please offer a good price for repeating customer!! Will bring more friends to you tongue.gif


shaguarbb
post Jan 15 2014, 04:38 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(one81 @ Jan 15 2014, 09:21 AM)
Installed HO Safety & Security C50-4mil end of December... how much u paid for ur Picanto? I paid RM1.1k... JPJ approved and received 5 year warranty certificate... btw, the SA told me if JPJ still give me ticket for the window film, he ask me to give it to him and the window film shop will pay for me...
Installed at :
*
QUOTE(one81 @ Jan 2 2014, 04:21 PM)
sorry because i didn't mention earlier... actually I bought a new car and the car salesman give me Huper Optik for free.. so when I get my car, it's already installed.. so far i can't see any bubble..
*
Sorry bro...
Just to Clarify,
Fully Original Huper Optik package sure cannot get RM1.1k and please your help to remove the half receipt picture.
Thank you notworthy.gif

This post has been edited by shaguarbb: Jan 15 2014, 04:39 PM
gogocan
post Jan 15 2014, 05:07 PM

Casual
***
Junior Member
485 posts

Joined: Dec 2013
1st car - sech60 + C40
2nd car - sech60 + C20

Overall performance beyond my expectation.recommended.



gogocan
post Jan 15 2014, 05:09 PM

Casual
***
Junior Member
485 posts

Joined: Dec 2013
QUOTE(shaguarbb @ Jan 15 2014, 04:38 PM)
Sorry bro...
Just to Clarify,
Fully Original Huper Optik package sure cannot get RM1.1k and please your help to remove the half receipt picture.
Thank you  notworthy.gif
*
I think you kena con ler.the warranty certificate issued by shop or smart window?
shaguarbb
post Jan 15 2014, 05:36 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(gogocan @ Jan 15 2014, 05:09 PM)
I think you kena con ler.the warranty certificate issued by shop or smart window?
*
That's real receipt.... but not warranty certificate blush.gif
pzo
post Jan 16 2014, 12:05 AM

Getting Started
**
Junior Member
124 posts

Joined: Jan 2008
Hi All,
Raytech 4 mill. Gray colour for Peugeot 208 , 700 after discount, is it a good deal? im noob in this tinted business.
I really don't know what type it is anyway..
one81
post Jan 16 2014, 08:56 AM

Enthusiast
*****
Senior Member
854 posts

Joined: Jul 2010
From: Cheras, Kuala Lumpur


QUOTE(shaguarbb @ Jan 15 2014, 05:36 PM)
That's real receipt.... but not warranty certificate  blush.gif
*
but i received 5 years warranty certificate from smart window.. maybe the price is cheaper because my car dealer install it for me... idk.. sweat.gif
shaguarbb
post Jan 16 2014, 09:14 AM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(one81 @ Jan 16 2014, 08:56 AM)
but i received 5 years warranty certificate from smart window.. maybe the price is cheaper because my car dealer install it for me... idk..  sweat.gif
*
Hmm... hmm.gif
I have check back my invoice that don't have any cars go for Fully Huper Optik package that around that price including SA dealer in December except for Mix. If you go for Fully HO package will need to wait for your Official Warranty card for 1-2 months from Smart Window, impossible can get it within 1-2 weeks.
If you want confirm you are fully HO package from your SA can just PM me your invoice number nod.gif
one81
post Jan 16 2014, 09:17 AM

Enthusiast
*****
Senior Member
854 posts

Joined: Jul 2010
From: Cheras, Kuala Lumpur


QUOTE(shaguarbb @ Jan 16 2014, 09:14 AM)
Hmm...  hmm.gif
I have check back my invoice that don't have any cars go for Fully Huper Optik package that around that price including SA dealer in December except for Mix. If you go for Fully HO package will need to wait for your Official Warranty card for 1-2 months from Smart Window, impossible can get it within 1-2 weeks.
If you want confirm you are fully HO package from your SA can just PM me your invoice number  nod.gif
*
oh wait... i didn't say i go for fully HO package... sweat.gif but I will pm u later.. thanks
shaguarbb
post Jan 16 2014, 09:30 AM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(one81 @ Jan 16 2014, 09:17 AM)
oh wait... i didn't say i go for fully HO package... sweat.gif  but I will pm u later.. thanks
*
Thanks for your clarification bro...
Because I scare your post before this will make my future customer confuse notworthy.gif
one81
post Jan 16 2014, 09:48 AM

Enthusiast
*****
Senior Member
854 posts

Joined: Jul 2010
From: Cheras, Kuala Lumpur


QUOTE(shaguarbb @ Jan 16 2014, 09:30 AM)
Thanks for your clarification bro...
Because I scare your post before this will make my future customer confuse  notworthy.gif
*
it's ok bro.. my bad because i didn't make it clear in the first place notworthy.gif
MGM
post Jan 16 2014, 11:21 AM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(one81 @ Jan 2 2014, 04:21 PM)

sorry because i didn't mention earlier... actually I bought a new car and the car salesman give me Huper Optik for free.. so when I get my car, it's already installed.. so far i can't see any bubble..

QUOTE(one81 @ Jan 15 2014, 09:21 AM)

Installed HO Safety & Security C50-4mil end of December... how much u paid for ur Picanto? I paid RM1.1k... JPJ approved and received 5 year warranty certificate... btw, the SA told me if JPJ still give me ticket for the window film, he ask me to give it to him and the window film shop will pay for me...

QUOTE(one81 @ Jan 16 2014, 08:56 AM)

but i received 5 years warranty certificate from smart window.. maybe the price is cheaper because my car dealer install it for me... idk.. sweat.gif


QUOTE(one81 @ Jan 16 2014, 09:17 AM)
oh wait... i didn't say i go for fully HO package... sweat.gif  but I will pm u later.. thanks
*
Maybe later u will say it is cheaper bcos u did HO on BACKSIDE only. tongue.gif

I am keen to know what actually transpired as I am also interested in getting HO until now.

Btw the first 2 posts above had disappeared fr the thread, didn't know that can be done.

This post has been edited by MGM: Jan 16 2014, 11:22 AM
YNWAG8
post Jan 17 2014, 12:31 AM

New Member
*
Newbie
0 posts

Joined: Jan 2014
I used llumar diamond 6 for the past 2 years and happy with this. Plan to getting the same tinted fot my new car but price increase. The SA recommended Vessolar 6mil. Any comment on Vessolar?
kelvyn
post Jan 17 2014, 08:08 AM

Look at all my stars!!
*******
Senior Member
3,173 posts

Joined: May 2007
QUOTE(MGM @ Jan 16 2014, 12:21 PM)
QUOTE(one81 @ Jan 2 2014, 04:21 PM)

sorry because i didn't mention earlier... actually I bought a new car and the car salesman give me Huper Optik for free.. so when I get my car, it's already installed.. so far i can't see any bubble..

QUOTE(one81 @ Jan 15 2014, 09:21 AM)

Installed HO Safety & Security C50-4mil end of December... how much u paid for ur Picanto? I paid RM1.1k... JPJ approved and received 5 year warranty certificate... btw, the SA told me if JPJ still give me ticket for the window film, he ask me to give it to him and the window film shop will pay for me...

QUOTE(one81 @ Jan 16 2014, 08:56 AM)

but i received 5 years warranty certificate from smart window.. maybe the price is cheaper because my car dealer install it for me... idk..  sweat.gif
Maybe later u will say it is cheaper bcos u did HO on BACKSIDE only. tongue.gif

I am keen to know what actually transpired as I am also interested in getting HO until now.

Btw the first 2 posts above had disappeared fr the thread, didn't know that can be done.
*
After reading them I am beginning to have doubts on the content. What is he/she trying to get at?
Not doubting the quality of the product itself. I am using HO in one of my car and am satisfied with it.

rajasiang
post Jan 17 2014, 02:59 PM

New Member
*
Newbie
0 posts

Joined: Feb 2009
Just take my Picanto (HO Fws C70, Rws C50 & Windows C50 Security 4 mil) from Tint shop in Serdang Jaya at noon, while driving back I can feel a lot cooler and my car shine after applying Gzox Real Glass Coating.
Both job well done
toofriggingslow
post Jan 17 2014, 04:08 PM

New Member
*
Junior Member
46 posts

Joined: Jul 2009
hello sifus,

need some advise & comments on AGARD tint.

car salesman offer AGARD safety film (5mil) + tint film for suv car (Honda CRV) - 4 side windows (both films) + windscreen & back (tint film only), for rm1300. says is very very special offer...

1) any comments on AGARD films ? are they good ? usually comes with how many years warranty ?

2) is the above rm1300 offer good to take up ?

3) any offer or promotions that AGARD is offering which I am not aware of?

Please give me some comments. your help most appreciated !
dlcentury
post Jan 17 2014, 05:49 PM

New Member
*
Newbie
3 posts

Joined: Aug 2013
Just to share something i found online. Useful information on selecting a good tinting product. What do you guys think?

QUOTE
Step 1. Filter the Good brand window film that carry and selling USA film. Do some research on the brand’s website, figure out the background of the brand and the supplier/ manufacturer behind the brand. Many window tinted brand unable to reveal this information as they are not selling USA product, and there are not information about their manufacturer.

After choosing the right brand, goes to step 2.

Step 2. Make sure you buying the right product of the brand. Do not cheated with "House Brand". Many dealers in market today buying franchise from USA brand to attract customer come into their shop, but they selling a lot of other low grade product to customer, instead of original product. These non-original product called "House Brand" which is also from Korea, Taiwan & China film. In fact, many people have no idea they are using the fake product, as the dealer still giving warranty card on 'House-Brand" products. Unfortunately, most people maybe don't know about their tinted warranty only valid in that particular shop where they tinted their car.

Example : Let say Volkswagen is a good car brand. If you are buying the non original Volkswagen car from one dealer, and you unable to claim warranty in any other Volkswagen workshop, you must go back the shop where you buy this car for service and warranty claim. Why? it is because you are not purchase a real Volkswagen car at the beginning, so means you being cheated paying money on non-original product. Of course, this will not happen in real life, as we all know how to see those car model, but window film is different story. People really don't know how to differential it.

How to figure out the original product of the brand? It is simple. Figure out the original product in website, check on the available product model and film specification. Normally original product is printed the brand logo on the tinted film and pack with original packaging.


Step 3. To make sure you choose the right tint film. Go to the shop personally, test the film personally with spotlight, and request for solar meter device testing. After filtered the right brand and the right product. Now start survey by comparing the film quality, film performance, film price, film color, film reflective, film warranty coverage, testimonial etc.

Don't proceed to step 3, before step 1 & 2.

MGM
post Jan 17 2014, 06:05 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(dlcentury @ Jan 17 2014, 05:49 PM)
Just to share something i found online. Useful information on selecting a good tinting product. What do you guys think?
*
Think I have come across this writeup. May be u should give credit to the writer by posting the link.
ralyon
post Jan 17 2014, 06:33 PM

Getting Started
**
Junior Member
234 posts

Joined: Jan 2005


QUOTE(yeahh @ Jan 7 2014, 12:57 PM)
i went and got the new slim smart tag based on ur comments
haha

yes it works smile.gif
*
The new slim smart tag works for me too. The old one didn't work after installing crystalline 70. Also the slim one fit into driver side coin drawer. rclxm9.gif

This post has been edited by ralyon: Jan 17 2014, 06:33 PM
yeahh
post Jan 17 2014, 09:19 PM

Not enough stars :(
******
Senior Member
1,715 posts

Joined: Jan 2003
From: Selangor


QUOTE(ralyon @ Jan 17 2014, 06:33 PM)
The new slim smart tag works for me too. The old one didn't work after installing crystalline 70. Also the slim one fit into driver side coin drawer. rclxm9.gif
*
but for me i need to drive reaaaaaaally slowly then it works ... tongue.gif
rajasiang
post Jan 18 2014, 12:19 PM

New Member
*
Newbie
0 posts

Joined: Feb 2009
QUOTE(yeahh @ Jan 17 2014, 09:19 PM)
but for me i need to drive reaaaaaaally slowly then it works ... tongue.gif
*
rclxms.gif rclxms.gif rclxms.gif

This post has been edited by rajasiang: Jan 18 2014, 04:15 PM
furiousangel
post Jan 19 2014, 01:36 PM

New Member
*
Junior Member
28 posts

Joined: Aug 2010




Visited Raytech Cheras branch yesterday to get my new car done. It's my 3rd car done by Raytech and their service and workmanship was up to expectation. Heard from a lot of forummers who are concerned with removing the door panel, which worries me of course. But they assure everything will be well taken care of smile.gif In conclusion, am happy with the work done thumbup.gif

Here are some pictures for viewing pleasure tongue.gif

user posted image
user posted image
user posted image
sj0217
post Jan 19 2014, 02:48 PM

Look at all my stars!!
*******
Senior Member
6,483 posts

Joined: Apr 2012
QUOTE(furiousangel @ Jan 19 2014, 01:36 PM)
Visited Raytech Cheras branch yesterday to get my new car done. It's my 3rd car done by Raytech and their service and workmanship was up to expectation. Heard from a lot of forummers who are concerned with removing the door panel, which worries me of course. But they assure everything will be well taken care of smile.gif In conclusion, am happy with the work done thumbup.gif

Here are some pictures for viewing pleasure tongue.gif

user posted image
user posted image
user posted image
*
Nice !!! rclxms.gif

Are you apply for 7mil??
bernardryan
post Jan 21 2014, 01:58 PM

bench warmer
****
Senior Member
662 posts

Joined: Mar 2006
I'm thinking of putting V-kool Elite for front windscreen and V-kool X6 (6mil) for windows and V-Kool x6 2mil for back windscreen.. Any issue with that?

Anyone know whats the price for this setup?
FirstNoob
post Jan 21 2014, 05:28 PM

Getting Started
**
Junior Member
232 posts

Joined: Dec 2006
Guys, i am getting my car this coming Thursday. It's a d-segment car, new accord. Any recommendation on which tint should i go for? Appreciate for your help. I do not have any knowledge on car stuff. Better if you guys could tell me which shop should i go to. And how good is the quality.

My budget is around 1k?
kelvyn
post Jan 21 2014, 09:46 PM

Look at all my stars!!
*******
Senior Member
3,173 posts

Joined: May 2007
QUOTE(FirstNoob @ Jan 21 2014, 06:28 PM)
Guys, i am getting my car this coming Thursday. It's a d-segment car, new accord. Any recommendation on which tint should i go for? Appreciate for your help. I do not have any knowledge on car stuff. Better if you guys could tell me which shop should i go to. And how good is the quality.

My budget is around 1k?
*
bro, you will not be happy with a 1k tinting on your accord. Double that & i am sure there are plenty of tints to choose from.
titanic_crash
post Jan 21 2014, 10:06 PM

Getting Started
**
Junior Member
274 posts

Joined: Oct 2012
QUOTE(FirstNoob @ Jan 21 2014, 05:28 PM)
Guys, i am getting my car this coming Thursday. It's a d-segment car, new accord. Any recommendation on which tint should i go for? Appreciate for your help. I do not have any knowledge on car stuff. Better if you guys could tell me which shop should i go to. And how good is the quality.

My budget is around 1k?
*
i choose llumar for my new accord
FirstNoob
post Jan 22 2014, 09:25 AM

Getting Started
**
Junior Member
232 posts

Joined: Dec 2006
QUOTE(titanic_crash @ Jan 21 2014, 10:06 PM)
i choose llumar for my new accord
*
How much u spent? Is the heat rejection good? Safety?
titanic_crash
post Jan 22 2014, 01:57 PM

Getting Started
**
Junior Member
274 posts

Joined: Oct 2012
QUOTE(FirstNoob @ Jan 22 2014, 09:25 AM)
How much u spent? Is the heat rejection good? Safety?
*
2k plus i think...not really know because it is included in the loan..
only 50% heat rejection..but i choose 8 mil for security
furiousangel
post Jan 22 2014, 06:09 PM

New Member
*
Junior Member
28 posts

Joined: Aug 2010



QUOTE(sj0217 @ Jan 19 2014, 02:48 PM)
Nice !!!  rclxms.gif

Are you apply for 7mil??
*
Thanks tongue.gif I took the 6mil only thumbup.gif
will_wong
post Jan 23 2014, 12:51 PM

New Member
*
Junior Member
23 posts

Joined: Nov 2013
QUOTE(titanic_crash @ Jan 22 2014, 01:57 PM)
2k plus i think...not really know because it is included in the loan..
only 50% heat rejection..but i choose 8 mil for security
*
Wah 8 mil got affect your power window?

I installed a 6 mil Raytech CS for my Civic and after 1 year the power window got damaged. Luckily Honda repaired the power window for free biggrin.gif

Even now after 5 years can still hear squealing when winding down the window.
Lord Gitsy
post Jan 25 2014, 11:40 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(will_wong @ Jan 23 2014, 12:51 PM)
Wah 8 mil got affect your power window?

I installed a 6 mil Raytech CS for my Civic and after 1 year the power window got damaged. Luckily Honda repaired the power window for free biggrin.gif

Even now after 5 years can still hear squealing when winding down the window.
*
Hi bro, actually 6mil safety film is working quite ok with most of the power window, as it is not so thick. As professional opinion, Raytech does not recommend safety film that above 6mil as it will burden and may disruption the power window after 1-2 years. Somehow, thicker film does not means it is better in term of safety, laboratory report on physical performance of safety film in more important. Raytech safety film special engineered between 4-6mil make in USA world class manufacturer, which provide sufficient safety features to consumer car used. We do not make safety film thicker than 6mil.
CoffeeCow
post Jan 30 2014, 01:55 AM

Getting Started
**
Junior Member
52 posts

Joined: Feb 2013


Did my cars tint at Raytech after contacting Shawn.
After a few weeks I can say is good.

The tint I picked for City is 65% dark, look quite dark during noon but not so dark at nite... must be daylight reflection more so is look darker at daytime vs night.

user posted image
user posted image
user posted image
user posted image
user posted image
user posted image



PBDHH
post Feb 5 2014, 11:47 PM

Getting Started
**
Junior Member
223 posts

Joined: Jan 2008


Guys,

Any good tint recommendation for my Camry front screen only.
I have been using 3M for my car unfortunately I'm sick n tired of winding down my window whenever I have to pass along same tag lane.

I'm looking for front screen tint replacement with high uv rejection rate n smartag friendly as well as I'm only planning to change my front screen tint only.

Kindly advise.

Jack
Post-Je-Ape-Ape
post Feb 6 2014, 10:11 PM

Getting Started
**
Junior Member
221 posts

Joined: Dec 2013
I've jz finished a tint job on my baby, and it looks F***ING DARK... When I was in the shop I saw a tint like 75%, it wasn't all that dark, in fact it looks JPJ passable at least. When I went to collect my car at night, damn, do I have trouble driving it.... It's a pain driving at night =_=.. Since its my first time doing tinted I learnt my lesson... I know its impossible to lighten a tinted... I have to peel it and re-tint my side and front window to 40%
lonely143
post Feb 7 2014, 09:20 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Post-Je-Ape-Ape @ Feb 6 2014, 10:11 PM)
I've jz finished a tint job on my baby, and it looks F***ING DARK... When I was in the shop I saw a tint like 75%, it wasn't all that dark, in fact it looks JPJ passable at least. When I went to collect my car at night, damn, do I have trouble driving it.... It's a pain driving at night =_=.. Since its my first time doing tinted I learnt my lesson... I know its impossible to lighten a tinted... I have to peel it and re-tint my side and front window to 40%
*
Bro, you make mistake here.

You should put the sample near to your glass windows look at it
different angle because your glass is not 100% transparent.
stephy_06
post Feb 7 2014, 11:13 PM

Getting Started
**
Junior Member
52 posts

Joined: Sep 2008
Hi sifu! Is it advisable to tint the sunroof? Is it necessary? blush.gif

Lord Gitsy
post Feb 8 2014, 12:46 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(stephy_06 @ Feb 7 2014, 11:13 PM)
Hi sifu! Is it advisable to tint the sunroof? Is it necessary?  blush.gif
*
Hi, normally I will recommend very dark window film for sun roof, VLT below 30%. That make you feel comfortable and cooler. Some people they might like very clear film for sun roof too. This is depend on your personal favorite. By the way, for your information, Sun roof is not part of car window that restrict by JPJ rules and regulations.
Lord Gitsy
post Feb 8 2014, 12:54 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Post-Je-Ape-Ape @ Feb 6 2014, 10:11 PM)
I've jz finished a tint job on my baby, and it looks F***ING DARK... When I was in the shop I saw a tint like 75%, it wasn't all that dark, in fact it looks JPJ passable at least. When I went to collect my car at night, damn, do I have trouble driving it.... It's a pain driving at night =_=.. Since its my first time doing tinted I learnt my lesson... I know its impossible to lighten a tinted... I have to peel it and re-tint my side and front window to 40%
*
Hi bro,

1) If you wish the window film compliant with JPJ.
a) Front Windscreen = above 70% VLT
b) The rest window = above 50% VLT

2) If you can accept dark film, Non compliant with JPJ. But clear vision on day and night, and people can look into you.
a) Front Windscreen = at least 50% VLT
b) The rest window = Between 30% - 40% VLT.

Window Film below 30% VLT is too dark at night. Hard to see clear on night vision.
Be smart to choose your film.

To solve your current problem, I may suggest you just change the front windscreen tint film to brighter film and see how the result.
If the problem unsolved, then you change your rear windscreen tint film.
If the problem still unsolved, then you can change another 4 doors tint film. smile.gif


geek8585
post Feb 8 2014, 03:41 PM

Enthusiast
*****
Senior Member
923 posts

Joined: Nov 2011
QUOTE(PBDHH @ Feb 5 2014, 11:47 PM)
Guys,

Any good tint recommendation for my Camry front screen only.
I have been using 3M for my car unfortunately I'm sick n tired of winding down my window whenever I have to pass along same tag lane.

I'm looking for front screen tint replacement with high uv rejection rate n smartag friendly as well as I'm only planning to change my front screen tint only.

Kindly advise.

Jack
*
change to latest smart tag machine instead... the slim one heard work better with thick tint... smile.gif
goliath
post Feb 8 2014, 04:09 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
Do the side windows' tint take twice as long for it to cure compared to the front and back windscreens?
Post-Je-Ape-Ape
post Feb 9 2014, 01:28 AM

Getting Started
**
Junior Member
221 posts

Joined: Dec 2013
QUOTE(Lord Gitsy @ Feb 8 2014, 12:54 PM)
Hi bro,

1) If you wish the window film compliant with JPJ.
    a) Front Windscreen = above 70% VLT
    b) The rest window = above 50% VLT

2) If you can accept dark film, Non compliant with JPJ. But clear vision on day and night, and people can look into you.
    a) Front Windscreen = at least 50% VLT
    b) The rest window = Between 30% - 40% VLT.

Window Film below 30% VLT is too dark at night. Hard to see clear on night vision.
Be smart to choose your film.

To solve your current problem, I may suggest you just change the front windscreen tint film to brighter film and see how the result.
If the problem unsolved, then you change your rear windscreen tint film.
If the problem still unsolved, then you can change another 4 doors tint film.  smile.gif
*
My driver side and passanger side have to change, cuz its too dark. Its 75% dark-tinted. Front I can see but my top side, I tinted too much. I paste a black sticker 10 inches wide. Need to reduce to 7 inch... Haiz... So I just change my front to 40% tint and side to also 40. Rear to 50%.
agent8411
post Feb 9 2014, 08:12 AM

New Member
*
Newbie
0 posts

Joined: Jul 2009


Anyone ever heard of Winshield window tint specialist? was recommended by my SA for tint, however the only info that i can get is their website and facebook page.

and nobody has ever review or give comments whether it is good, cheap, expensive or giving any problems after installation.

seriously need opinion or info about window tint since its my first time.

website page--> http://www.winshield.com.my/home

facebook page --> https://www.facebook.com/winshieldtrading

thanks
lonely143
post Feb 9 2014, 10:51 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(goliath @ Feb 8 2014, 04:09 PM)
Do the side windows' tint take twice as long for it to cure compared to the front and back windscreens?
*
Yes, because FWS and BWS normally is 2Mil film and curing period is about 2-3weeks
For side, depends on the thickness of the film and normally 4Mil will take about 1-2 month to cure.
lonely143
post Feb 9 2014, 10:52 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(agent8411 @ Feb 9 2014, 08:12 AM)
Anyone ever heard of Winshield window tint specialist? was recommended by my SA for tint, however the only info that i can get is their website and facebook page.

and nobody has ever review or give comments whether it is good, cheap, expensive or giving any problems after installation.

seriously need opinion or info about window tint since its my first time.

website page--> http://www.winshield.com.my/home

facebook page --> https://www.facebook.com/winshieldtrading

thanks
*
This is HOMEBRAND, thats why no much international info for this "Winshield"
wil.i.am
post Feb 9 2014, 11:39 PM

New Member
*
Junior Member
4 posts

Joined: Aug 2010


QUOTE(agent8411 @ Feb 9 2014, 08:12 AM)
Anyone ever heard of Winshield window tint specialist? was recommended by my SA for tint, however the only info that i can get is their website and facebook page.

and nobody has ever review or give comments whether it is good, cheap, expensive or giving any problems after installation.

seriously need opinion or info about window tint since its my first time.

website page--> http://www.winshield.com.my/home

facebook page --> https://www.facebook.com/winshieldtrading

thanks
*
Winshield is not a great brand, yet selling expensive with its Korea Window Film. My previous CIty was tinted in Winshield, SS2 few years back as recommended by my salesman. It is one of the "so called" good brands product, my car is tinted with RM1800 tint and I actually feel so hot. Thus, I make a complaint to my salesman, my salesman say the tinted is fixed can not be taken out, he suggest me to tint a second layer so I can feel better.

Somehow, there is no JPJ guarantee for that. What the hell is this all about vmad.gif Why should I tint second layer and trouble myself? Why the film is so out of standard? Recommend by salesman as good brand, maybe this brand provide good commission to the Honda salesman?

After read though these window film thread, what these sifus mentioned are right, never go for brands that are unable to review the brand's background, manufacturer, supplier, and those brands that you never heard of before. It's a waste of your money vmad.gif
agent8411
post Feb 10 2014, 07:09 AM

New Member
*
Newbie
0 posts

Joined: Jul 2009


QUOTE(wil.i.am @ Feb 9 2014, 11:39 PM)
Winshield is not a great brand, yet selling expensive with its Korea Window Film. My previous CIty was tinted in Winshield, SS2 few years back as recommended by my salesman. It is one of the "so called" good brands product, my car is tinted with RM1800 tint and I actually feel so hot. Thus, I make a complaint to my salesman, my salesman say the tinted is fixed can not be taken out, he suggest me to tint a second layer so I can feel better.

Somehow, there is no JPJ guarantee for that. What the hell is this all about vmad.gif Why should I tint second layer and trouble myself? Why the film is so out of standard? Recommend by salesman as good brand, maybe this brand provide good commission to the Honda salesman?

After read though these window film thread, what these sifus mentioned are right, never go for brands that are unable to review the brand's background, manufacturer, supplier, and those brands that you never heard of before. It's a waste of your money vmad.gif
*
wah.. thank u bro for replying my question. luckily i didnt install the window tint yet with winshield window tint. Quite worried abt it because no one share or talks abt it in any forums. And from the website also, it didnt mention about the brand of the product used for tint.

now, might considering the Huper Optik for my window tint.
goliath
post Feb 10 2014, 01:34 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(lonely143 @ Feb 9 2014, 10:51 PM)
Yes, because FWS and BWS normally is 2Mil film and curing period is about 2-3weeks
For side, depends on the thickness of the film and normally 4Mil will take about 1-2 month to cure.
*
Thanks for the input.

On the other hand, are the white spots at the sides curable?
lonely143
post Feb 10 2014, 04:46 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(goliath @ Feb 10 2014, 01:34 PM)
Thanks for the input.

On the other hand, are the white spots at the sides curable?
*
Yes, we call it as shampoo mark. Normally it appear on Safety Film
This is because shampoo chemical reaction with the film adhesive (glue)

It might take up to 3 months for all the shampoo mark disappear depends on the weather and thickness of the film.
If the shampoo mark still there after 6 months, you can go back to shop and ask for warranty claim.

This post has been edited by lonely143: Feb 10 2014, 04:47 PM
lonely143
post Feb 10 2014, 04:48 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(agent8411 @ Feb 10 2014, 07:09 AM)
wah.. thank u bro for replying my question. luckily i didnt install the window tint yet with winshield window tint. Quite worried abt it because no one share or talks abt it in any forums. And from the website also, it didnt mention about the brand of the product used for tint.

now, might considering the Huper Optik for my window tint.
*
Yes, SA want to earn more comm. Huper Optik is good brand and recommended
goliath
post Feb 10 2014, 05:31 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(lonely143 @ Feb 10 2014, 04:46 PM)
Yes, we call it as shampoo mark. Normally it appear on Safety Film
This is because shampoo chemical reaction with the film adhesive (glue)

It might take up to 3 months for all the shampoo mark disappear depends on the weather and thickness of the film.
If the shampoo mark still there after 6 months, you can go back to shop and ask for warranty claim.
*
Thanks for the explanation and help. smile.gif

I've got a few of those white spots on 3 of side windows which have yet to subside. I shall wait then.
8brian4
post Feb 10 2014, 11:48 PM

Getting Started
**
Junior Member
59 posts

Joined: Nov 2013
hi,

anyone install solar tint film ?

can share ?




Attached image(s)
Attached Image
8brian4
post Feb 10 2014, 11:54 PM

Getting Started
**
Junior Member
59 posts

Joined: Nov 2013
QUOTE(dlcentury @ Jan 17 2014, 05:49 PM)
Just to share something i found online. Useful information on selecting a good tinting product. What do you guys think?
*
right, there are too many of secondary brands in the market... blush.gif
it make me confusing...
myroadtax.com
post Feb 11 2014, 01:31 PM

New Member
*
Newbie
0 posts

Joined: Feb 2014
From: Nilai, Seremban, Banting

QUOTE(PBDHH @ Feb 5 2014, 11:47 PM)
Guys,

Any good tint recommendation for my Camry front screen only.
I have been using 3M for my car unfortunately I'm sick n tired of winding down my window whenever I have to pass along same tag lane.

I'm looking for front screen tint replacement with high uv rejection rate n smartag friendly as well as I'm only planning to change my front screen tint only.

Kindly advise.

Jack
*
I use Cool World for both of my cars and there is no problems at all with tng smart tag and GPS reception.

Checkout their website & fb:
http://www.coolworld.com.my
https://www.facebook.com/coolworld.com.my

There just might be a branch near you smile.gif
fkinmeng
post Feb 11 2014, 03:48 PM

Look at all my stars!!
*******
Senior Member
6,372 posts

Joined: May 2007
i'm getting a new vios soon, if my budget is 1k, which tint is recommended?
bobb_86
post Feb 12 2014, 11:03 AM

New Member
*
Junior Member
36 posts

Joined: Jul 2006
Got offer huper optik fsw c70 rear n back c50 @rm1.6k... gooding?
shaguarbb
post Feb 12 2014, 04:02 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(bobb_86 @ Feb 12 2014, 11:03 AM)
Got offer huper optik fsw c70 rear n back c50 @rm1.6k... gooding?
*
Can try upgrade FWS to Sech60 for better heat rejection performance wink.gif
hafiez
post Feb 12 2014, 06:13 PM

Look at all my stars!!
*******
Senior Member
2,980 posts

Joined: Jan 2007
From: Mount Chiliad



yea Sech60 really feel the difference. thumbup.gif
SUSlowya
post Feb 14 2014, 05:21 PM

Look at all my stars!!
*******
Senior Member
4,821 posts

Joined: Mar 2009
looking for tint film to diy on room's window panels (estimated 40sqft), whats the cost effective option to block uv and heat per sqft and where can i buy and install myself?

if it works well i might do a review and install same film on car later on.
Eterman
post Feb 14 2014, 10:24 PM

Casual
***
Junior Member
490 posts

Joined: Aug 2006


anyone heard of xtra cool brand?

i assume that it is a house brand since i can't find any online info about it, but i'd like to know if anyone had experience with this brand. thanks.
lonely143
post Feb 15 2014, 08:40 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(lowya @ Feb 14 2014, 05:21 PM)
looking for tint film to diy on room's window panels (estimated 40sqft), whats the cost effective option to block uv and heat per sqft and where can i buy and install myself?

if it works well i might do a review and install same film on car later on.
*
If you wan DIY, perhaps can get it around Pudu or Pandan Indah ~
kapultek
post Feb 18 2014, 07:34 AM

Regular
******
Senior Member
1,376 posts

Joined: Oct 2008


Will be getting my civic next week..
Any nice and honest tinting agent do pm me nice offer... if got around 1k
LightEnchanter
post Feb 18 2014, 10:43 AM

Casual
***
Junior Member
336 posts

Joined: Oct 2005


they claim the irr rejection can up to 88% for rm258 only

anyone bought from them before ?

http://www.groupon.my/deals/klang/twin-koo...alist/718020411
ExCrIpT
post Feb 18 2014, 03:29 PM

Regular
******
Senior Member
1,671 posts

Joined: Jan 2003


Llumar good?
jeff10012003
post Feb 19 2014, 02:44 PM

Format Complete
*******
Senior Member
2,117 posts

Joined: Nov 2011
From: Island of Malacca Straits



hi guys, checking in cause i'm thinking of replacing my tint.
just want to know what's the difference between using just a normal groupon tinting vs known brands?

my current tint was by advance auto guard if im not mistaken using advant cool(i forgot where i put the warranty card).

sample groupon deal
and then my FWS broke as it was hit by rock during my drive. now i replaced a new one but without tinting

also if i were to use lower percentage of tinting(surely not jpj compliant) what would the risk, to say, of the tint protection in long term and will it effect the glass?
dadurtyz
post Feb 19 2014, 03:39 PM

On my way
****
Senior Member
658 posts

Joined: May 2006
From: Melaka



guyz im interested to fit my car with LLUMAR titanium security tint, 20% VLT and 8mm, any review on this tint
cyberheross
post Feb 19 2014, 06:19 PM

Getting Started
**
Junior Member
143 posts

Joined: Apr 2010
From: Johor Bahru


Guys, I got quoted RM1800 for my Hyundai i10 for Raytech CS85 & Ultra 70.
The shop that quote me is one of the authorised dealer listed in Raytech Msia website.

Is it overpriced? Or reasonable?
I asked for discount, he say discount to RM1500...
shaundev
post Feb 20 2014, 11:26 AM

New Member
*
Newbie
0 posts

Joined: Feb 2014
Hi Guys,

I need a favour from you guys. I'm planning to tint my e200 which im focused more on security and cooolness. This is the promo price im getting from my sales man.

Vkool 6mil is RM4300.00 and 8 mil is RM5000.00

For wingard..they have only 6mil . the price is RM4000.00

Do you think this is the right price?

please let me know which one should I go for and must be smartag compatible.

Thanks
bernard79
post Feb 20 2014, 08:13 PM

Getting Started
**
Junior Member
70 posts

Joined: May 2008
QUOTE(shaundev @ Feb 20 2014, 11:26 AM)
Hi Guys,

I need a favour from you guys. I'm planning to tint my e200 which im focused more on security and cooolness. This is the promo price im getting from my sales man.

Vkool 6mil is RM4300.00 and 8 mil is RM5000.00

For wingard..they have only 6mil . the price is RM4000.00

Do you think this is the right price?

please let me know which one should I go for and must be smartag compatible.

Thanks
*
Go for 3M film and you would not feel regretted later.. Just tinted mine and quite satisfied with the heat insulation... smile.gif
Lord Gitsy
post Feb 21 2014, 11:06 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(dadurtyz @ Feb 19 2014, 03:39 PM)
guyz im interested to fit my car with LLUMAR titanium security tint, 20% VLT and 8mm, any review on this tint
*
Wow, VLT20% do you think is very dark, this film not compliant with JPJ rules.
RDStartUp
post Feb 22 2014, 11:23 PM

New Member
*
Newbie
0 posts

Joined: Nov 2013


3M FWS C60, RWS C40, SW NANO S40 for RM1,900. Good deal?


shaundev
post Feb 24 2014, 11:39 PM

New Member
*
Newbie
0 posts

Joined: Feb 2014
QUOTE(bernard79 @ Feb 20 2014, 08:13 PM)
Go for 3M film and you would not feel regretted later.. Just tinted mine and quite satisfied with the heat insulation... smile.gif
*
Thanks Bernard. Mine is iridium silver. Black tint should be nice rite?

What do you think about 3m nano 40s?

This post has been edited by shaundev: Feb 24 2014, 11:40 PM
Post-Je-Ape-Ape
post Feb 25 2014, 12:23 AM

Getting Started
**
Junior Member
221 posts

Joined: Dec 2013
Anyone tried Tint Gallery before? http://tintgallery.com/

Have a few cars here with Tint Gallery using WinGard... Its amazing.. Dat 10 year warranty against bubbling and all.
bernard79
post Feb 25 2014, 07:55 AM

Getting Started
**
Junior Member
70 posts

Joined: May 2008
QUOTE(shaundev @ Feb 24 2014, 11:39 PM)
Thanks Bernard. Mine is iridium silver. Black tint should be nice rite?

What do you think about 3m nano 40s?
*
I would say this is better than the Vkool elite in my previous ride, probably this round I opted for Nano 40s which is slightly darker and higher TSER efficiency... smile.gif
studentsurvey
post Feb 26 2014, 12:03 AM

Getting Started
**
Junior Member
212 posts

Joined: May 2013
QUOTE(LightEnchanter @ Feb 18 2014, 10:43 AM)
they claim the irr rejection can up to 88% for rm258 only

anyone bought from them before ?

http://www.groupon.my/deals/klang/twin-koo...alist/718020411
*
Have you tried it?
thought of getting it.
Anyone got any comment on it?

studentsurvey
post Feb 26 2014, 12:04 AM

Getting Started
**
Junior Member
212 posts

Joined: May 2013
QUOTE(LightEnchanter @ Feb 18 2014, 10:43 AM)
they claim the irr rejection can up to 88% for rm258 only

anyone bought from them before ?

http://www.groupon.my/deals/klang/twin-koo...alist/718020411
*
Have you tried it cause thought of getting it as well..
Anyone got any comment on it?

guy3288
post Feb 26 2014, 07:07 PM

Look at all my stars!!
*******
Senior Member
5,846 posts

Joined: Sep 2009


my SA at Honda offerring Ecotint for Honda Accord.

1)RB Signature package -RM3000 10 yr warranty

FWS - RB 01 - SER 67%, IRR 97% - not security film
RWS - Ray Barrier (RB) Signature Class (SC) - Solar Energy rejection 67%, IR rejection97% - security film.

Windows - RB SC A6 - 6 millions security film and heat/IR rejection as above

2)Hybrid Premier RM2500 - 8 yrs war.

FWS - RB 01
RWS - RB 01
Windows - Hybrid 6 millions film - Solar rejection 56%, IRR 90%


3)Hybrid classic RM1700 - 8 yrs
FWS adn RWS - Std USA film - SER only 45%, IRR 70%
Windows - security film 4 millions, SER 56% and IRR 90%

ANybody got experience with Ecotint films?

I am thinking , front and rear windscreen heat rejection is most important, so the std USA films in classic hybrid sure is insufficient. Any comment?

Windows -Ray Barrier
zookambing
post Feb 27 2014, 08:49 PM

Getting Started
**
Junior Member
130 posts

Joined: Apr 2008
From: black area



first time use raytech at my windscreen with raytech ultra70
very big different with my previous llumar
Eithanius
post Feb 27 2014, 09:58 PM

::+::KukuNius(tm)::+::
*******
Senior Member
3,952 posts

Joined: Apr 2005
From: Sector 1921B, Delta Quadrant


QUOTE(zookambing @ Feb 27 2014, 08:49 PM)
first time use raytech at my windscreen with raytech ultra70
very big different with my previous llumar
*
On what car and how much...?
ttvv
post Feb 28 2014, 12:09 AM

New Member
*
Junior Member
6 posts

Joined: May 2006
you mean heat rejection raytech better than llumar ?

viper1912
post Feb 28 2014, 03:11 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2007
QUOTE(RDStartUp @ Feb 22 2014, 11:23 PM)
3M FWS C60, RWS C40, SW NANO S40 for RM1,900. Good deal?
*
Reasonable...make sure is from authorised 3M reseller.


viper1912
post Feb 28 2014, 03:16 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2007
[quote=PBDHH,Feb 5 2014, 11:47 PM]
Guys,

Any good tint recommendation for my Camry front screen only.
I have been using 3M for my car unfortunately I'm sick n tired of winding down my window whenever I have to pass along same tag lane.

I'm looking for front screen tint replacement with high uv rejection rate n smartag friendly as well as I'm only planning to change my front screen tint only.

Kindly advise.

Jack


Go tot get the latest smart tag which is black in color, when approaching toll, do it at a slow speed. The smart tag should be tilt at a 45 degree angel.
Meaning to say is not sited flat on the dash board.

The smart tag should place at the highest point of your dash board. It shouldnt hv any problem..on smart tag with 3M Crystalline.
viper1912
post Feb 28 2014, 03:19 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2007
QUOTE(shaundev @ Feb 24 2014, 11:39 PM)
Thanks Bernard. Mine is iridium silver. Black tint should be nice rite?

What do you think about 3m nano 40s?
*
3M nano is the latest security & solar film 2 in 1 combination.

If you wanted black then go for the Color Stable, you will be satisfied with its black color.

But dun expect the heat rejected on par with Crystalline or 3M Nano



ivzh
post Mar 1 2014, 05:12 PM

On my way
****
Senior Member
668 posts

Joined: Mar 2006
for huper optik, Sech 60 and C70, which one have better heat rejection??

hafiez
post Mar 1 2014, 06:00 PM

Look at all my stars!!
*******
Senior Member
2,980 posts

Joined: Jan 2007
From: Mount Chiliad



QUOTE(ivzh @ Mar 1 2014, 05:12 PM)
for huper optik, Sech 60 and C70, which one have better heat rejection??
*
Sech60.

No joke.
lonely143
post Mar 1 2014, 07:53 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(hafiez @ Mar 1 2014, 06:00 PM)
Sech60.

No joke.
*
Yes Sech 60
kenhirai83
post Mar 1 2014, 10:21 PM

Getting Started
**
Junior Member
85 posts

Joined: May 2007
Hi, does the thicker the tint will hurt the power window ?

Considering Raytech Centurions RX 4mil & 6mil.

Is it 6mil will get high chance to cause damage to the power window ?
shaguarbb
post Mar 1 2014, 10:22 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(ivzh @ Mar 1 2014, 05:12 PM)
for huper optik, Sech 60 and C70, which one have better heat rejection??
*
Definitely Sech60 thumbup.gif
kenhirai83
post Mar 1 2014, 10:32 PM

Getting Started
**
Junior Member
85 posts

Joined: May 2007
QUOTE(shaguarbb @ Mar 1 2014, 10:22 PM)
Definitely Sech60  thumbup.gif
*
Sech60 VLT 59%. It is JPJ approve ?
Actually how to see which one had more heat resistant ? Compare to Total Solar Energy Resistant ?
Higher the better ?
zookambing
post Mar 2 2014, 07:51 AM

Getting Started
**
Junior Member
130 posts

Joined: Apr 2008
From: black area



QUOTE(Eithanius @ Feb 27 2014, 09:58 PM)
On what car and how much...?
*
new alza

QUOTE(ttvv @ Feb 28 2014, 12:09 AM)
you mean heat rejection  raytech better than llumar ?
*
that my experience
btw...next car will be tinted with raytech also. tongue.gif
shaguarbb
post Mar 3 2014, 08:50 AM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(kenhirai83 @ Mar 1 2014, 10:32 PM)
Sech60 VLT 59%. It is JPJ approve ?
Actually how to see which one had more heat resistant ? Compare to Total Solar Energy Resistant ?
Higher the better ?
*
No any film is JPJ approved bro. It's depend on tint brands willing to cover or not, we only can say JPJ compliant or Cover JPJ wink.gif
Heat rejection basically is base on IRR + TSER but most important is Film materiel quality.
yewkhuay
post Mar 4 2014, 10:37 PM

I don't even belong here....
*******
Senior Member
6,657 posts

Joined: Jul 2006
honda jazz and vios, which is the more commonly used brand ? budget rm1500?
mellem
post Mar 5 2014, 05:25 PM

New Member
*
Junior Member
21 posts

Joined: Dec 2010
QUOTE(Lord Gitsy @ Dec 7 2013, 04:24 PM)
Raytech Safety film is develop in Commonwealth Laminating and Coating, Inc, tested by America National Standard Institute. As window film specialist, Raytech just emphasis in the thickness of 4-6mil for automobile window used. Normally, 6mil and above will cause disruption of power window in1-2 years time in most of car.

Safety and security films are usually used to improve the performance of the glass for protection against human impact, bomb blasts, natural disaster, intrusion or seismic activity.

Safety film is always described in term of “mils”, which is a measurement of thickness as one thousandth of an inch (1/1000 inch). One mil equals 25.4 microns (micrometers). Safety film ranges in thickness 4 mils to upwards of 15 mils and thicker. The varying thickness is achieved by mechanically laminating multiple layers of film together with aggressive adhesive coatings. The Safety film is attached to the glass with extremely aggressive pressure sensitive adhesive. When stress causes the glass to break, the film has ability to stretch and absorb some or all of the energy generated by the stress. The result is that the broken glass may remain intact within the framing system preventing shards of glass becoming lethal projectiles.

Designed for applications where safety and security is a priority
a) Excellent solar performance, including heat and UV rejection, as well as glare reduction Superior optical clarity
b) Advanced adhesive formulation
c) Evaluation according to the following test methods/standards:
    Small Missile Impact Test – ANSI Z-97.1 and CPSC 16 CFR 1201
    Large Missile Impact Test & Cyclic Window Pressure Tests –
    ASTM E 1886-02/ASTM E 1996-03, Level C, 4.5lb 2" x 4"
    GSA Explosive Test – GSA-TS01-2003

How much for V97 on sides n rear
ultra 70 on front
for KIA Cerato 1.6

Please don't ask me buy from which KIA branch or whatsoever. I am fed up with KIA sales agent and panel tinting shop teamed up in the end charging consumer even more although claimed to be cheaper than doing it ourselves directly with tinting shop eg Llumar, Raytech, 3M.

So don't go around telling me those standard statements by sales agent and panel shop. Which shop you bought your car? Got voucher? Got voucher cheaper, we are panel for so and so branch.

Why wanna do that crap to customers? You want returning business or what? You sell to us also gain why use middle man aka car sales agent?
nghp24
post Mar 6 2014, 04:48 PM

New Member
*
Newbie
0 posts

Joined: Aug 2008


Hi,
Anyone has tinted their Mazda Biante? How much does it cost? Mine is white color.
The salesman told me it cost 2.5k if use 3M. He said my biante has many windows.
Thanks
HP

This post has been edited by nghp24: Mar 6 2014, 04:50 PM
coconutzz
post Mar 7 2014, 12:04 PM

Regular
******
Senior Member
1,109 posts

Joined: Mar 2007
QUOTE(lonely143 @ Mar 1 2014, 07:53 PM)
Yes Sech 60
*
is Sech 60 jpj compliant? because Sech 60 is VLT 59 ?


lonely143
post Mar 9 2014, 12:15 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(coconutzz @ Mar 7 2014, 12:04 PM)
is Sech 60 jpj compliant? because Sech 60 is VLT 59 ?
*
Depends, if the shop willing to give you summon warranty then is good =)
wayfeel
post Mar 9 2014, 12:36 AM

Member of Elite Negotiators xD
*******
Senior Member
2,114 posts

Joined: Sep 2005
From: East


is IR800 (InfraRed 800) good? I just did my mom old hcity for sub 1K...Not cheap IMO, neither is premium brand pricing

Color seem good in my eyes, abit darkish type

Hope someone can give review use of this brand

Boss say is from huper optik factory or same company. Price rather okok, not expensive nor cheap...he claimed quality it is better than the likes of Sun/Solargard (S brand which around 500-600? which I was quoted this for)




This post has been edited by wayfeel: Mar 9 2014, 12:39 AM
WannaGetBuffed
post Mar 9 2014, 12:31 PM

Enthusiast
*****
Senior Member
983 posts

Joined: Jul 2008
What model is huper optik sech? How come it is not listed in huperoptik.com?
Lord Gitsy
post Mar 9 2014, 02:16 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


Read to understand more about window film market and How to choose a good brand USA Film.

user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************

Lord Gitsy
post Mar 9 2014, 02:17 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013



user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
user posted image
***********************************************************************************************************************
coconutzz
post Mar 9 2014, 08:51 PM

Regular
******
Senior Member
1,109 posts

Joined: Mar 2007
How is raytech cs85 vs huper optik Sech60 or c70... Can someone advise?
Lord Gitsy
post Mar 10 2014, 01:04 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(coconutzz @ Mar 9 2014, 08:51 PM)
How is raytech cs85 vs huper optik Sech60 or c70... Can someone advise?
*
You are welcome to Raytech outlet for Solar Meter Testing.
doncab
post Mar 10 2014, 04:47 PM

New Member
*
Junior Member
14 posts

Joined: Oct 2009
From: Kuantan



hi

need advice on this picture

user posted image

what is the diff between single/double pane and tinted/clear?
lonely143
post Mar 10 2014, 10:12 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(doncab @ Mar 10 2014, 04:47 PM)
hi

need advice on this picture

user posted image

what is the diff between single/double pane and tinted/clear?
*
Where did you get this reading? This analysis more applicable to commercial/residential windows.
Most of the car windows fall on 1st category.

This post has been edited by lonely143: Mar 10 2014, 10:14 PM
Lord Gitsy
post Mar 11 2014, 09:27 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(doncab @ Mar 10 2014, 04:47 PM)
hi

need advice on this picture

user posted image

what is the diff between single/double pane and tinted/clear?
*
Hi bro, I Malaysia most of window is single panel. Double panel window is glass window panes separated by an air or other gas filled space to reduce heat and cool transfer across a part of the building envelope.

user posted image
doncab
post Mar 11 2014, 10:21 AM

New Member
*
Junior Member
14 posts

Joined: Oct 2009
From: Kuantan



QUOTE(lonely143 @ Mar 10 2014, 10:12 PM)
Where did you get this reading?  This analysis more applicable to commercial/residential windows.
Most of the car windows fall on 1st category.
*
QUOTE(Lord Gitsy @ Mar 11 2014, 09:27 AM)
Hi bro, I Malaysia most of window is single panel. Double panel window is glass window panes separated by an air or other gas filled space to reduce heat and cool transfer across a part of the building envelope.

user posted image
*
thanks for the reply

i just tinted mine Sun-Gard Signature 35 and this reading from Sun-Gard site.

so i guess this tint film not JPJ compliance which VLT below 50%?

26Terry
post Mar 13 2014, 01:30 AM

New Member
*
Newbie
0 posts

Joined: Mar 2014
I am getting Toyota Wish soon.
I am considering to tint with Huper Optik. C70 for front & rear and C50 safety 4 mil for side windows.
Please PM me your best price and location of your shop.
hafiez
post Mar 13 2014, 12:29 PM

Look at all my stars!!
*******
Senior Member
2,980 posts

Joined: Jan 2007
From: Mount Chiliad



QUOTE(26Terry @ Mar 13 2014, 01:30 AM)
I am getting Toyota Wish soon.
I am considering to tint with Huper Optik. C70 for front & rear and C50 safety 4 mil for side windows.
Please PM me your best price and location of your shop.
*
consider Sech60 for FWS since your FWS is big. add another rm200 iinm.
d_scientist
post Mar 13 2014, 02:11 PM

Getting Started
**
Junior Member
248 posts

Joined: Dec 2006


Hi guys

need some advise as I'm getting a cx-5 soon. was told by sales of mazda to get Huper Optik from Breyton Penang.

my questions are:
1. Which tint shop to go for great workmanship and reasonable pricing
2. What tint to choose from if my priority is IRR
3. I need something that would work with Smartag and GPS and Keyless
4. Has anyone else tinted their CX-5 and what is ur price + type of tint + location u tinted ur car.

Mnay thanks to all sifu sifu sekalian
26Terry
post Mar 13 2014, 10:50 PM

New Member
*
Newbie
0 posts

Joined: Mar 2014
QUOTE(hafiez @ Mar 13 2014, 12:29 PM)
consider Sech60 for FWS since your FWS is big. add another rm200 iinm.
*
Bro, will this Sech60 affect visibility at night?
hafiez
post Mar 14 2014, 11:15 AM

Look at all my stars!!
*******
Senior Member
2,980 posts

Joined: Jan 2007
From: Mount Chiliad



QUOTE(26Terry @ Mar 13 2014, 10:50 PM)
Bro, will this Sech60 affect visibility at night?
*
Honestly i dont know

But in my opinion, this is good quality tint, so i think it wont effect your night driving. From what i see, the tint a bit darker than c50, but giving spectacular heat rejection.

U might want to ask the experts for clear answer.
lonely143
post Mar 14 2014, 10:14 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(26Terry @ Mar 13 2014, 10:50 PM)
Bro, will this Sech60 affect visibility at night?
*
Wont, the VLT is around 65-55%
K4iz3n
post Mar 14 2014, 10:47 PM

Getting Started
**
Junior Member
212 posts

Joined: May 2010
Anyone can recommend a good shop to install Huper Optik on a CX-5 in Selangor?
lwk523
post Mar 15 2014, 08:24 AM

Premium Q Trader
******
Senior Member
1,040 posts

Joined: Mar 2006


Any sifu here can assist me to Tint my car with my film ?? Penang area ..

Thank you.
starry-starry
post Mar 16 2014, 09:53 PM

Enthusiast
*****
Junior Member
918 posts

Joined: Aug 2009
I'm thinking of tinting my "old" car but won't go for very expensive tints.

I'm considering LLumar Silver, would appreciate if everyone can share your reviews.

1. How is the quality in short & long term?
2. How does it reflect on window? Is it dark or easy to see-thru?
3. Is it JPJ compliant if I apply LLUmar silver for all windows?

Below is LLmuar silver info:

VLT 57%
TSER 41%
IRR 90%
UVR 99%

This post has been edited by starry-starry: Mar 16 2014, 09:54 PM
Xu3r
post Mar 17 2014, 12:14 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



which one is better

I am currently buying new car and need the best
kaizhen
post Mar 17 2014, 07:51 PM

New Member
*
Junior Member
16 posts

Joined: Jun 2006


Guys,

I'm being quoted by my car sales consultant on Raytech

CS85 (5 mil) - RM1,800
Centurion RX6 (6 mil) - RM3,000

Is this a reasonable deal?
ttvv
post Mar 17 2014, 08:39 PM

New Member
*
Junior Member
6 posts

Joined: May 2006
Huper Optik Sech60(Front/Side/Rear) - RM1800
but the shop don't hv air corn room,be afraid tinting not perfect
cos of dust.
starry-starry
post Mar 17 2014, 10:29 PM

Enthusiast
*****
Junior Member
918 posts

Joined: Aug 2009
QUOTE(ttvv @ Mar 17 2014, 08:39 PM)
Huper Optik Sech60(Front/Side/Rear) - RM1800
but the shop don't hv air corn room,be afraid tinting not perfect
cos of dust.
*
Will it affect the final outcome in a non-air-cond room cuz of dusts? Anyone can advise?

And waiting for my posts to be answered by experts or users still... icon_question.gif
Xu3r
post Mar 17 2014, 10:29 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



is vcool any good ?

My car dealer tell me go buy vcool with solar and anti break
lonely143
post Mar 18 2014, 08:35 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(starry-starry @ Mar 16 2014, 09:53 PM)
I'm thinking of tinting my "old" car but won't go for very expensive tints.

I'm considering LLumar Silver, would appreciate if everyone can share your reviews.

1. How is the quality in short & long term?
2. How does it reflect on window? Is it dark or easy to see-thru?
3. Is it JPJ compliant if I apply LLUmar silver for all windows?

Below is LLmuar silver info:

VLT 57%
TSER 41%
IRR 90%
UVR 99%
*
1. How is the quality in short & long term?
The quality is for short term only
2. How does it reflect on window? Is it dark or easy to see-thru?
It will not so dark, but still able to see-thru
3. Is it JPJ compliant if I apply LLUmar silver for all windows?
Based on the specification, it only comply if the film is install at side and rear.
lonely143
post Mar 18 2014, 08:37 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(ttvv @ Mar 17 2014, 08:39 PM)
Huper Optik Sech60(Front/Side/Rear) - RM1800
but the shop don't hv air corn room,be afraid tinting not perfect
cos of dust.
*
Definitely will affect the workmanship
lonely143
post Mar 18 2014, 08:40 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Xu3r @ Mar 17 2014, 10:29 PM)
is vcool any good ?

My car dealer tell me go buy vcool with solar and anti break
*
VKool + Solar Gard 4Mil
This combination only give you average performance.
If you have budget, upgrade it to full VKool Safety film.
Xu3r
post Mar 18 2014, 10:33 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



QUOTE(lonely143 @ Mar 18 2014, 08:40 AM)
VKool + Solar Gard 4Mil
This combination only give you average performance.
If you have budget, upgrade it to full VKool Safety film.
*
i currently want the best brand best solar guard + glass break guard
lonely143
post Mar 18 2014, 01:55 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Xu3r @ Mar 18 2014, 10:33 AM)
i currently want the best brand best solar guard + glass break guard
*
Umm I dont understand what you mean. By the way, you can consult your SA
ivzh
post Mar 18 2014, 06:00 PM

On my way
****
Senior Member
668 posts

Joined: Mar 2006
I have my car tinted with huperoptic, supposely i requested c50 (4mil) for side but ends up they give me c40+ ??? 6mm transparent film on top of it for security.

when i ask what film they use fpr the transparent film, they can't answer pula.. hmm
is it common practice to put a security film on a solar flim??

This post has been edited by ivzh: Mar 18 2014, 06:06 PM
starry-starry
post Mar 18 2014, 08:08 PM

Enthusiast
*****
Junior Member
918 posts

Joined: Aug 2009
QUOTE(lonely143 @ Mar 18 2014, 08:35 AM)
1. How is the quality in short & long term?
The quality is for short term only
2. How does it reflect on window? Is it dark or easy to see-thru?
It will not so dark, but still able to see-thru
3. Is it JPJ compliant if I apply LLUmar silver for all windows?
Based on the specification, it only comply if the film is install at side and rear.
*
In fact, I'm interested in blocking views from outside looking into the car.

1. Is there any tint you'd recommend but comply with JPJ requirement?
2. Is dark tint better than silver tint based on my requirement to block the view from outside?
3. Do you have any brand you'd recommend?
4. And my car is considered not a new car, will there be any difficulties in tinting?!

This post has been edited by starry-starry: Mar 18 2014, 08:11 PM
lonely143
post Mar 18 2014, 08:33 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(starry-starry @ Mar 18 2014, 08:08 PM)
In fact, I'm interested in blocking views from outside looking into the car.

1. Is there any tint you'd recommend but comply with JPJ requirement?
2. Is dark tint better than silver tint based on my requirement to block the view from outside?
3. Do you have any brand you'd recommend?
4. And my car is considered not a new car, will there be any difficulties in tinting?!
*
1. Is there any tint you'd recommend but comply with JPJ requirement?
- This is very hard, the JPJ rules is >70% VLT for FWS, >50% all side and BWS

2. Is dark tint better than silver tint based on my requirement to block the view from outside?
- No, reflective tint with VLT 50% might be able to achieve your requirement but honestly ppl still can see you thru
but at least you can create some mirror effect on certain angle. If you want those totally block ppl view from outside, you need at least
20-30% VLT film with high reflectance but that does not comply with regulations

3. Do you have any brand you'd recommend?
- You can try out VKool + Solar Gard Safety Series

4. And my car is considered not a new car, will there be any difficulties in tinting?!
- This not an issue as we will remove and clean your windows before put up brand new tint.
lonely143
post Mar 18 2014, 08:34 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(ivzh @ Mar 18 2014, 06:00 PM)
I have my car tinted with huperoptic, supposely i requested c50 (4mil) for side but ends up they give me c40+ ??? 6mm transparent film on top of it for security.

when i ask what film they use fpr the transparent film, they can't answer pula.. hmm
is it common practice to put a security film on a solar flim??
*
Ummm sounds fishy here.

There are 2 consequences I think

1. They try to cheat you !
2. Perhaps the Ceramic 50 4Mil is out of stock, thats why they put 2 layer.

Another question, did they give product warranty and summon warranty?
ivzh
post Mar 18 2014, 09:04 PM

On my way
****
Senior Member
668 posts

Joined: Mar 2006
QUOTE(lonely143 @ Mar 18 2014, 08:34 PM)
Ummm sounds fishy here.

There are 2 consequences I think

1. They try to cheat you !
2. Perhaps the Ceramic 50 4Mil is out of stock, thats why they put 2 layer.

Another question, did they give product warranty and summon warranty?
*
I have the warranty with me, but it's incomplete as it didn't state what is the product used for the side and rear tint.
That's why i call them up for clarification.
anyway, all huperoptic should come with a summon warranty too (the physical document)?


lonely143
post Mar 18 2014, 09:14 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(ivzh @ Mar 18 2014, 09:04 PM)
I have the warranty with me, but it's incomplete as it didn't state what is the product used for the side and rear tint.
That's why i call them up for clarification.
anyway, all huperoptic should come with a summon warranty too (the physical document)?
*
There is no summon warranty, is verbally promise because JPJ never approved any tint
babygrand123
post Mar 18 2014, 10:30 PM

On my way
****
Junior Member
672 posts

Joined: Sep 2011
anyone here tinted 2 layer at front screen ?? and how is the visibility ? It is clear to view ? will causing any headache while driving ???
starry-starry
post Mar 18 2014, 10:54 PM

Enthusiast
*****
Junior Member
918 posts

Joined: Aug 2009
QUOTE(lonely143 @ Mar 18 2014, 08:33 PM)
1. Is there any tint you'd recommend but comply with JPJ requirement?
- This is very hard, the JPJ rules is >70% VLT for FWS, >50% all side and BWS

2. Is dark tint better than silver tint based on my requirement to block the view from outside?
- No, reflective tint with VLT 50% might be able to achieve your requirement but honestly ppl still can see you thru
but at least you can create some mirror effect on certain angle. If you want those totally block ppl view from outside, you need at least
20-30% VLT film with high reflectance but that does not comply with regulations

3. Do you have any brand you'd recommend?
- You can try out VKool + Solar Gard Safety Series

4. And my car is considered not a new car, will there be any difficulties in tinting?!
- This not an issue as we will remove and clean your windows before put up brand new tint.
*
That sounds good, but how to identify reflective film?

How long it takes to clean the oily windows? I was been told that the process could take more than 10 hours as certain cleaning product will be applied and allow it to dry.

This post has been edited by starry-starry: Mar 18 2014, 11:27 PM
fkinmeng
post Mar 19 2014, 02:53 PM

Look at all my stars!!
*******
Senior Member
6,372 posts

Joined: May 2007
hi, need advice here.

i'm getting a new vios soon, and the salesperson recommend me to do tinting with 3m.

1) titanium 5mil black/green/gold (Solar and Safety), RM700 after discount

2) arctic black/green/gold (solar only), rm600 after discount

infra red - 66%
uv - 99%
visible light - 50%
tser - 66%

5 years warranty.

is it worth it? or there are other better specs?

#edit: forgot to mention, both also in house brand.

This post has been edited by fkinmeng: Mar 19 2014, 02:53 PM
layzieboy
post Mar 19 2014, 03:06 PM

Casual
***
Junior Member
496 posts

Joined: Mar 2007


QUOTE(fkinmeng @ Mar 19 2014, 02:53 PM)
hi, need advice here.

i'm getting a new vios soon, and the salesperson recommend me to do tinting with 3m.

1) titanium 5mil black/green/gold (Solar and Safety), RM700 after discount

2) arctic black/green/gold (solar only), rm600 after discount

infra red - 66%
uv - 99%
visible light - 50%
tser - 66%

5 years warranty.

is it worth it? or there are other better specs?

#edit: forgot to mention, both also in house brand.
*
is this the 3m crystalline version? I heard there are issues with smart tag usage... Most people here go for Raytech I think. but I tinted with TintShop.. yawn.gif
fkinmeng
post Mar 19 2014, 03:11 PM

Look at all my stars!!
*******
Senior Member
6,372 posts

Joined: May 2007
QUOTE(layzieboy @ Mar 19 2014, 03:06 PM)
is this the 3m crystalline version? I heard there are issues with smart tag usage... Most people here go for Raytech I think. but I tinted with TintShop.. yawn.gif
*
i doubt it's crystalline version, just some in house brand.
lonely143
post Mar 19 2014, 10:07 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(babygrand123 @ Mar 18 2014, 10:30 PM)
anyone here tinted 2 layer at front screen ?? and how is the visibility ? It is clear to view ? will causing any headache while driving ???
*
Not recommended, it will cause blur vision.
Remember the glass is laminated.
lonely143
post Mar 19 2014, 10:14 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(starry-starry @ Mar 18 2014, 10:54 PM)
That sounds good, but how to identify reflective film?

How long it takes to clean the oily windows? I was been told that the process could take more than 10 hours as certain cleaning product will be applied and allow it to dry.
*
Follow the simple step to identify reflective film.

1. It always dark, silver or stainless steel color.
2. Take a look at the film, if you can see your face. Congratulation you have found it !

When you send it to tinting, they will do it for you ah ~~
lonely143
post Mar 19 2014, 10:15 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(fkinmeng @ Mar 19 2014, 03:11 PM)
i doubt it's crystalline version, just some in house brand.
*
Yea agree ~ 3M house brand la ~
Lord Gitsy
post Mar 19 2014, 10:49 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(babygrand123 @ Mar 18 2014, 10:30 PM)
anyone here tinted 2 layer at front screen ?? and how is the visibility ? It is clear to view ? will causing any headache while driving ???
*
Really not recommend for 2 layer tint for front windscreen. Will cause blur vision.
babygrand123
post Mar 20 2014, 02:21 AM

On my way
****
Junior Member
672 posts

Joined: Sep 2011
QUOTE(Lord Gitsy @ Mar 19 2014, 10:49 PM)
Really not recommend for 2 layer tint for front windscreen. Will cause blur vision.
*
Thanks for the feedback !!!! rclxms.gif
babygrand123
post Mar 20 2014, 02:21 AM

On my way
****
Junior Member
672 posts

Joined: Sep 2011
QUOTE(lonely143 @ Mar 19 2014, 10:07 PM)
Not recommended, it will cause blur vision.
Remember the glass is laminated.
*
Thanks for the feedback !!!! rclxms.gif
shaguarbb
post Mar 20 2014, 01:49 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(ivzh @ Mar 18 2014, 06:00 PM)
I have my car tinted with huperoptic, supposely i requested c50 (4mil) for side but ends up they give me c40+ ??? 6mm transparent film on top of it for security.

when i ask what film they use fpr the transparent film, they can't answer pula.. hmm
is it common practice to put a security film on a solar flim??
*
Hmm.... Did they told you that install second layer film on top of original HO film will cause no warranty from HO sweat.gif
30923
post Mar 23 2014, 12:31 PM

New Member
*
Junior Member
22 posts

Joined: Jun 2011


Hi,

Wanna to tinted my XV.Anybody know price for Llumar,3M and etc.
Others brand carry the same quality.Any suggestion


Thanks in advance

Biskut coklat
post Mar 23 2014, 10:39 PM

Getting Started
**
Junior Member
104 posts

Joined: Mar 2010
Anybody can offer me best price for window tint for my mazda 6. I prefer to have 80%vlt and at least 70% tser, silver or reflective colour. Selangor/kl area. Only the driver and front pessanger to have security tint. Pls pm me the best price. Thanks

This post has been edited by Biskut coklat: Mar 23 2014, 10:42 PM
GsTyLIn
post Mar 23 2014, 11:06 PM

New Member
*
Newbie
0 posts

Joined: Mar 2014
biggrin.gif

Hi Everyone!

I'm driving a vios and I want to get my car tinted coz is very very hot but I might sell out my car within a year. Need your expert suggestion/advice for the quality I should go for.

Many many thanks!
teanbread
post Mar 24 2014, 07:49 AM

Getting Started
**
Junior Member
120 posts

Joined: Apr 2009
From: Penang


I got offer quantum 37 for rm1200
from an authorized solar gard shop from kedah.
Is that worth to get it?
My car is vios and any recomanded tinted shop from penang or kedah ?
My budget is 800-1.2k
OC4/3
post Mar 24 2014, 07:47 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule


My family Honda City get tinted with 3M Crystaline 70 on front & back windscreen,Nano 70 on all 4 windows
Feel like car air cond suddenly get boosted icon_idea.gif
Interestingly,cannot wind down windows for 3 days & demister on back windscreen cannot be turned on for 2 weeks to allow glue to settle
Very satisfied with the price & the job done by the shop(3M Ampang)
Not to mention ladyboss is attractive & friendly laugh.gif (Bonus)
MGM
post Mar 25 2014, 04:28 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(OC4/3 @ Mar 24 2014, 07:47 PM)
My family Honda City get tinted with 3M Crystaline 70 on front & back windscreen,Nano 70 on all 4 windows
Feel like car air cond suddenly get boosted icon_idea.gif
Interestingly,cannot wind down windows for 3 days & demister on back windscreen cannot be turned on for 2 weeks to allow glue to settle
Very satisfied with the price & the job done by the shop(3M Ampang)
Not to mention ladyboss is attractive & friendly laugh.gif (Bonus)
*
How much you paid for the tinting?
OC4/3
post Mar 25 2014, 05:22 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule


QUOTE(MGM @ Mar 25 2014, 04:28 PM)
How much you paid for the tinting?
*
UGPM

kapultek
post Mar 25 2014, 06:20 PM

Regular
******
Senior Member
1,376 posts

Joined: Oct 2008


QUOTE(MGM @ Mar 25 2014, 04:28 PM)
How much you paid for the tinting?
*
How much
ronDON
post Mar 25 2014, 06:39 PM

Getting Started
**
Junior Member
54 posts

Joined: Sep 2008
From: Seri Kembangan \ Cyberjaya


i just got my wife's car tinted with Ray Tech CS85 last Friday...i contacted "Lord Gitsy" in LYN...he really spent time explaining and recommending a suitable tint...the job was fast n clean too...he made me superb offer as well....

but more importantly I think the quality of the tint (CS85) is good...maybe its too soon to say but after tinting the car and driving around in the traffic in the middle of the day all over Kuala Lumpur, the effect of the tint was noticeable....the difference between my car using ordinary tint vs the CS85 is very significant...

im happy with the purchase especially because Im pretty certain that I got what I paid for and wasn't ripped off...


Thanks Sean!! smile.gif

This post has been edited by ronDON: Mar 25 2014, 08:53 PM
MGM
post Mar 25 2014, 07:25 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
I have seen a video where two brands of tinting were compared whereby the demostrator put sticky tape on the two samples and when he peeled them off one the color came off and the other the color stayed. Just can't remember the brands involved. Anyone can help?
lonely143
post Mar 25 2014, 08:06 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(MGM @ Mar 25 2014, 07:25 PM)
I have seen a video where two brands of tinting were compared whereby the demostrator put sticky tape on the two samples and when he peeled them off one the color came off and the other the color stayed. Just can't remember the brands involved. Anyone can help?
*
Its not about brand. The purpose of the video is to highlight the consumer about the dye film.


MGM
post Mar 25 2014, 08:47 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(lonely143 @ Mar 25 2014, 08:06 PM)
Its not about brand. The purpose of the video is to highlight the consumer about the dye film.
*
So the one with the color peeled off is dye film? What about the other one, what type of film?
kahjye
post Mar 25 2014, 10:46 PM

Look at all my stars!!
*******
Senior Member
4,494 posts

Joined: Feb 2009

QUOTE(OC4/3 @ Mar 24 2014, 07:47 PM)
My family Honda City get tinted with 3M Crystaline 70 on front & back windscreen,Nano 70 on all 4 windows
Feel like car air cond suddenly get boosted icon_idea.gif
Interestingly,cannot wind down windows for 3 days & demister on back windscreen cannot be turned on for 2 weeks to allow glue to settle
Very satisfied with the price & the job done by the shop(3M Ampang)
Not to mention ladyboss is attractive & friendly laugh.gif (Bonus)
*
how much u paid bro? im intereested as well
OC4/3
post Mar 25 2014, 11:05 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule


QUOTE(kahjye @ Mar 25 2014, 10:46 PM)
how much u paid bro? im intereested as well
*
UGPM
leefk
post Mar 26 2014, 12:13 AM

Getting Started
**
Junior Member
97 posts

Joined: Jan 2005
QUOTE(OC4/3 @ Mar 25 2014, 11:05 PM)
UGPM
*
Let me know too.

This post has been edited by leefk: Mar 26 2014, 12:14 AM
virus699
post Mar 26 2014, 01:57 PM

Getting Started
**
Junior Member
78 posts

Joined: Oct 2007
installed raytech cs75 at alor setar..workmanship very bad..my previous cheap agard better.
goliath
post Mar 26 2014, 05:08 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
Have been using Huper Optik for past few months and sadly, I'm not really impressed with its heat rejection especially the front (Sech60) and the sides (C50-4mil). Somehow, my other car's Wingard Royale performs better especially during scorching day.
lonely143
post Mar 26 2014, 08:10 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(goliath @ Mar 26 2014, 05:08 PM)
Have been using Huper Optik for past few months and sadly, I'm not really impressed with its heat rejection especially the front (Sech60) and the sides (C50-4mil). Somehow, my other car's Wingard Royale performs better especially during scorching day.
*
Do you mind to tell us what car using Huper vs car that using Winguard?
goliath
post Mar 26 2014, 08:19 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(lonely143 @ Mar 26 2014, 08:10 PM)
Do you mind to tell us what car using Huper vs car that using Winguard?
*
Huper on Prius C and Wingard on Vios.
lonely143
post Mar 26 2014, 08:26 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(goliath @ Mar 26 2014, 08:19 PM)
Huper on Prius C and Wingard on Vios.
*
Based on spec from both product, Huper Sech 60 performance is on par with Winguard Royale
but the Ceramic 50 4mil heat performance is lower than it. I guess that why you feel the heat.


shaguarbb
post Mar 27 2014, 02:14 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(goliath @ Mar 26 2014, 05:08 PM)
Have been using Huper Optik for past few months and sadly, I'm not really impressed with its heat rejection especially the front (Sech60) and the sides (C50-4mil). Somehow, my other car's Wingard Royale performs better especially during scorching day.
*
Impossible Sech60 will lower heat rejection compare to Wingard hmm.gif
goliath
post Mar 27 2014, 02:25 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(shaguarbb @ Mar 27 2014, 02:14 PM)
Impossible Sech60 will lower heat rejection compare to Wingard  hmm.gif
*
Not sure. That's what I felt the heat...

On the other hand, my side windows still got white spots. Can re-install or claim warranty?
hafiez
post Mar 27 2014, 03:58 PM

Look at all my stars!!
*******
Senior Member
2,980 posts

Joined: Jan 2007
From: Mount Chiliad



QUOTE(goliath @ Mar 27 2014, 02:25 PM)
Not sure. That's what I felt the heat...

On the other hand, my side windows still got white spots. Can re-install or claim warranty?
*
My shop allow me to do that

No need to bring all those documents. The installer remember me.
shaguarbb
post Mar 27 2014, 04:14 PM

Getting Started
**
Junior Member
79 posts

Joined: Apr 2009
From: Sepang


QUOTE(goliath @ Mar 27 2014, 02:25 PM)
Not sure. That's what I felt the heat...

On the other hand, my side windows still got white spots. Can re-install or claim warranty?
*
If white spots or manufacturing defect sure can claim bro... Just remember bring receipt or warranty card nod.gif
goliath
post Mar 27 2014, 04:20 PM

* * * * * * *
*******
Senior Member
5,532 posts

Joined: Jan 2003
From: Kuala Lumpur
QUOTE(hafiez @ Mar 27 2014, 03:58 PM)
My shop allow me to do that

No need to bring all those documents. The installer remember me.
*
Ok. Good to know that.

QUOTE(shaguarbb @ Mar 27 2014, 04:14 PM)
If white spots or manufacturing defect sure can claim bro... Just remember bring receipt or warranty card  nod.gif
*
Ok. Will PM you soon.
Jojo
post Apr 1 2014, 05:40 PM

Getting Started
**
Junior Member
204 posts

Joined: Jan 2003



QUOTE(OC4/3 @ Mar 25 2014, 11:05 PM)
UGPM
*
PM PRICE PLS.. TKS..
aliazx
post Apr 1 2014, 05:44 PM

New Member
*
Newbie
3 posts

Joined: Nov 2004


I tinted my mirage with Raytech CS-60 last Saturday at Raytech Glenmarie. The lady demoed different types of tint using the solar light and provided explanations and guidlines on deciding the suitable tint. The workmanship is good and the whole tinting process was completed in mere than 1 hour.

Considering it's the lowest spec of the Raytech security tint, it fares well enough for my mirage. Also managed to get a good offer through DaBestOne. Overall I am satisfied with Raytech tint and the service provided smile.gif
hontoni1983
post Apr 1 2014, 06:11 PM

Getting Started
**
Junior Member
93 posts

Joined: Oct 2012
QUOTE(OC4/3 @ Mar 25 2014, 11:05 PM)
UGPM
*
Let me know as well...
keenhawk
post Apr 1 2014, 08:17 PM

Getting Started
**
Junior Member
166 posts

Joined: Apr 2011
Helping my friend promote, giving out 30% discount on Llumar tinted, best quality in Malaysia. Interested just pm me. I provide you my friend info. Thanks.
hussain
post Apr 4 2014, 06:44 AM

Look at all my stars!!
*******
Senior Member
2,012 posts

Joined: Dec 2007
From: Malaysia


Hello mate
Interested in llumar
How can I contact your friend?where is the shop? What are the prices ?
Please pm for merc a class?

Not sure type but if not mistaken diamond 6 range+ security film etc
I am in kl

May need to install next week
elvatra
post Apr 4 2014, 01:15 PM

New Member
*
Junior Member
36 posts

Joined: Jun 2010
QUOTE(Lord Gitsy @ Dec 5 2013, 02:40 PM)
If everybody still survey around by looking for the "film specification" and ask for the "best quote". You are totally in wrong way. Let me share my knowledge to you. In Malaysia market, there are many low grade products normally from Korea, Taiwan and China. These low grade tinted is good when you first buy, even test with spotlight or solar meter device, and the tinted spec is superb high, but somehow after some time maybe within 1-2 years, the low grade tinted will start getting poor in heat rejection, bubbling, and color fading. Would you like to spend thousand on these products? How to prevent from buying these low grade films in market?

If you looking for good product, you must select the right brand that selling USA film.

Step 1. Filter the Good brand window film that carry and selling USA film. Do some research on the brand’s website, figure out the background of the brand and the supplier/ manufacturer behind the brand. Many window tinted brand unable to reveal this information as they are not selling USA product, and there are not information about their manufacturer. 

After choosing the right brand, goes to step 2.

Step 2. Make sure you buying the right product of the brand. Do not cheated with "House Brand". Many dealers in market today buying franchise from USA brand to attract customer come into their shop, but they selling a lot of other low grade product to customer, instead of original product. These non-original  product called "House Brand" which is also from Korea, Taiwan & China film. In fact, many people have no idea they are using the fake product, as the dealer still giving warranty card on 'House-Brand" products. Unfortunately,  most people maybe don't know about their tinted warranty only valid in that particular shop where they tinted their car.

Example : Let say Toyota is a good car brand. You are buying the non-Toyota car from one dealer, and you unable to claim warranty in any other Toyota workshop, you must go back the shop where you buy this car for service and warranty claim. Why? it is because you are not purchase a real Toyota car at the beginning, so means you being cheated paying money on non-original product. Of course, this will not happen in real life, as we all know how to see those car model, but window film is different story. People really don't know how to differential it.

How to figure out the original product of the brand? It is simple. Figure out the original product in website, check on the available product model and film specification. Normally original product is printed the brand logo on the tinted film and pack with original packaging.
Step 3. To make sure you choose the right film. Goes to the shop personally, test the film personally with spotlight, and request for solar meter device testing. After filtered the right brand and the right product. Now start survey by comparing the film quality, film performance, film price, film color, film reflective, film warranty coverage, testimonial etc.

Don't proceed to step 3, before step 1 & 2.

Good Luck.  biggrin.gif
user posted image
user posted image
user posted image
user posted image
user posted image
user posted image
user posted image
user posted image
user posted image
user posted image
*
Hi Bro, i just bought my car few days ago, and my SA has given me raytech discount voucher which he mention only in maluri outlet only. just wondering is the shop have a gd repo? i'm just nd a medium range tint as the car even without the tint is already look dark which look from outside.

Biskut coklat
post Apr 4 2014, 01:20 PM

Getting Started
**
Junior Member
104 posts

Joined: Mar 2010
QUOTE(keenhawk @ Apr 1 2014, 08:17 PM)
Helping my friend promote, giving out 30% discount on Llumar tinted, best quality in Malaysia. Interested just pm me. I provide you my friend info. Thanks.
*
Im looking something similar ( in term of specs)/equivalent of 3M Crystalline 70 for front and back windscreen and 3m nano safety film for the side windows. How much your friend quote me for llumar? Thanks

This post has been edited by Biskut coklat: Apr 4 2014, 01:21 PM
salmony
post Apr 5 2014, 02:17 AM

New Member
*
Junior Member
5 posts

Joined: Oct 2009
QUOTE(OC4/3 @ Mar 24 2014, 07:47 PM)
My family Honda City get tinted with 3M Crystaline 70 on front & back windscreen,Nano 70 on all 4 windows
Feel like car air cond suddenly get boosted icon_idea.gif
Interestingly,cannot wind down windows for 3 days & demister on back windscreen cannot be turned on for 2 weeks to allow glue to settle
Very satisfied with the price & the job done by the shop(3M Ampang)
Not to mention ladyboss is attractive & friendly laugh.gif (Bonus)
*
PM me the details and the price thanks ! notworthy.gif
meichee
post Apr 5 2014, 02:29 AM

Getting Started
**
Junior Member
53 posts

Joined: Nov 2006


Anyone of you heard of Huper Optik Nano Ceramic Security Tint? And G'zox Flourine Coating? Thanks
cheewooi
post Apr 7 2014, 03:28 PM

Old Bird
****
Senior Member
540 posts

Joined: Jan 2003
From: Kuala Lumpur


Any reliable tint brand to recommend? Just came back from JPJ and my entire Pro Gard tint had to be destroyed due to noncompliance with JPJ even thou stated 50% VLT on side windows.

Original front and rear windows already 76% VLT without tint and side 70% VLT without tint - tested with JPJ VLT device.


skyfusion
post Apr 8 2014, 12:22 PM

Getting Started
**
Junior Member
274 posts

Joined: Jan 2005
my livina front screen cracked and need to be replaced. i also need to re tint again the front screen. can u guys recommend me a good tint for my car? dark, legal, superb heat rejection is what i am looking for. cheers smile.gif
lonely143
post Apr 8 2014, 02:56 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(cheewooi @ Apr 7 2014, 03:28 PM)
Any reliable tint brand to recommend? Just came back from JPJ and my entire Pro Gard tint had to be destroyed due to noncompliance with JPJ even thou stated 50% VLT on side windows.

Original front and rear windows already 76% VLT without tint and side 70% VLT without tint - tested with JPJ VLT device.
*
What model is that? The original glass already so dark... In my opinion, if you want to pass the JPJ test next time.. Your front film VLT have to be 85% and side 70%
sigmagadget
post Apr 8 2014, 10:50 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2010
Dear sa...looking for HO sech 60 fws, c40 bws n side...pls pm good price
eunicesum
post Apr 9 2014, 11:04 AM

New Member
*
Junior Member
19 posts

Joined: May 2007


Raytech always ask u walk in and see, they don't want to give u their price....
Why other brand willing to give their pirce (llumar, vkool)
I just don't want wasting my time if not within my budget...

This post has been edited by eunicesum: Apr 9 2014, 11:07 AM
cheewooi
post Apr 9 2014, 11:37 AM

Old Bird
****
Senior Member
540 posts

Joined: Jan 2003
From: Kuala Lumpur


QUOTE(lonely143 @ Apr 8 2014, 02:56 PM)
What model is that? The original glass already so dark... In my opinion, if you want to pass the JPJ test next time.. Your front film VLT have to be 85% and side 70%
*
Perodua Alza.

These are the device that JPJ used to measure VLT.
user posted image

Another thing I notice that the device sometime are not accurate. My rear windscreen are without tinted and they checked and told me that my VLT is only 33%. I confronted them directly and the just brush off with maybe there's dust on the windscreen.

After that another guy bring in another device, it says 76% VLT.
rclxub.gif


I am planning to re tint my car, but definitely I won't go for Pro Gard brand anymore. My criteria is simple, I don't need to be dark. JPJ compliance, best shatter protection for 4 doors and small rear windows for Alza. Maximum UV protection for front and back windscreen. The workmanship must be good. Any recommendation?

I am tired of handling this issue with JPJ, when things happened, the tint shop will just brush it off.


This post has been edited by cheewooi: Apr 9 2014, 11:43 AM
eunicesum
post Apr 9 2014, 11:59 AM

New Member
*
Junior Member
19 posts

Joined: May 2007


For heat reduction measurement
Beware or the IHR or IRR nonsense the higher is good but still has other factor, not shown actual heat reduction
ask for TSER (Total solar energy rejected) real percentage that reduce heat.

This post has been edited by eunicesum: Apr 9 2014, 12:02 PM
lonely143
post Apr 9 2014, 01:07 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(cheewooi @ Apr 9 2014, 11:37 AM)
Perodua Alza.

These are the device that JPJ used to measure VLT.
user posted image

Another thing I notice that the device sometime are not accurate. My rear windscreen are without tinted and they checked and told me that my VLT is only 33%. I confronted them directly and the just brush off with maybe there's dust on the windscreen.

After that another guy bring in another device, it says 76% VLT.
rclxub.gif
I am planning to re tint my car, but definitely I won't go for Pro Gard brand anymore. My criteria is simple, I don't need to be dark. JPJ compliance, best shatter protection for 4 doors and small rear windows for Alza. Maximum UV protection for front and back windscreen. The workmanship must be good. Any recommendation?

I am tired of handling this issue with JPJ, when things happened, the tint shop will just brush it off.
*
Your case is common. This good case studies too.
th3_glove20
post Apr 9 2014, 01:51 PM

Bla Blaa Blaaaa ~~
*****
Senior Member
702 posts

Joined: Oct 2004

Hi guys, thought of tinting my new ride...
But I'm currently stuck whether should I go for 3M+Security Film or Llumar..
Budget wise I think both are about the same..
Any advise smile.gif
viper1912
post Apr 9 2014, 04:30 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2007
QUOTE(th3_glove20 @ Apr 9 2014, 01:51 PM)
Hi guys, thought of tinting my new ride...
But I'm currently stuck whether should I go for 3M+Security Film or Llumar..
Budget wise I think both are about the same..
Any advise  smile.gif
*
PErhaps you can try 3M Crystalline for FWS and RWS.

For the side, you can opt for 3M Nano Security film.
elvatra
post Apr 9 2014, 04:43 PM

New Member
*
Junior Member
36 posts

Joined: Jun 2010
i just done my tint using raytech in my preve. total is1.5k for standard car.. but i get a discount of 600 using the voucher given by my SA.
th3_glove20
post Apr 9 2014, 06:02 PM

Bla Blaa Blaaaa ~~
*****
Senior Member
702 posts

Joined: Oct 2004

QUOTE(viper1912 @ Apr 9 2014, 04:30 PM)
PErhaps you can try 3M Crystalline for FWS and RWS.

For the side, you can opt for 3M Nano Security film.
*
Thanks..
Any trustable and good service shop? smile.gif
rachel_xxx
post Apr 9 2014, 09:43 PM

Look at all my stars!!
*******
Senior Member
2,294 posts

Joined: Sep 2009
QUOTE(cheewooi @ Apr 7 2014, 03:28 PM)
Any reliable tint brand to recommend? Just came back from JPJ and my entire Pro Gard tint had to be destroyed due to noncompliance with JPJ even thou stated 50% VLT on side windows.

Original front and rear windows already 76% VLT without tint and side 70% VLT without tint - tested with JPJ VLT device.
*
they not issue summon but just tear it off like that?
cheewooi
post Apr 9 2014, 10:02 PM

Old Bird
****
Senior Member
540 posts

Joined: Jan 2003
From: Kuala Lumpur


QUOTE(rachel_xxx @ Apr 9 2014, 09:43 PM)
they not issue summon but just tear it off like that?
*
No summon issued, just wanted to clear everything and re-test again with their VLT tester...


cheewooi
post Apr 9 2014, 10:03 PM

Old Bird
****
Senior Member
540 posts

Joined: Jan 2003
From: Kuala Lumpur


QUOTE(viper1912 @ Apr 9 2014, 04:30 PM)
PErhaps you can try 3M Crystalline for FWS and RWS.

For the side, you can opt for 3M Nano Security film.
*
What's should be the budget that I am looking at if I plan to tint 3M?


Lord Gitsy
post Apr 11 2014, 01:02 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(cheewooi @ Apr 9 2014, 10:03 PM)
What's should be the budget that I am looking at if I plan to tint 3M?
*
To me, JPJ VLT meter is problem to all window film company. Their reading make everyone in trouble. Whatever is it, Raytech company giving JPJ guarantee in this issue.
If you looking for premium quality tint with reasonable price. Raytech Window Film might be the best choice for you.

Check this out:

cheewooi
post Apr 11 2014, 03:20 PM

Old Bird
****
Senior Member
540 posts

Joined: Jan 2003
From: Kuala Lumpur


QUOTE(Lord Gitsy @ Apr 11 2014, 01:02 PM)
To me, JPJ VLT meter is problem to all window film company. Their reading make everyone in trouble. Whatever is it, Raytech company giving JPJ guarantee in this issue.
If you looking for premium quality tint with reasonable price. Raytech Window Film might be the best choice for you.

Check this out:

*
Hi,
Can you PM me range of tint that Raytech OFFER for my Alza. My criteria must be JPJ compliance as I had enough of these nonsense and 4 doors and rear windows must have security protection. Dark or not doesn't matter as long as it cut enough of UV.

My car color is pearl white, you might have an idea to match the color of the tint. The most convenience shop for Raytech for me should be Seri Kembangan HQ.

Thanks first.

ykc
post Apr 11 2014, 10:22 PM

Regular
******
Senior Member
1,884 posts

Joined: Feb 2005
QUOTE(OC4/3 @ Mar 25 2014, 11:05 PM)
UGPM
*
Hi, can pm me too? Thx
then17000
post Apr 12 2014, 01:27 AM

New Member
*
Junior Member
29 posts

Joined: Aug 2010
QUOTE(Lord Gitsy @ Apr 11 2014, 01:02 PM)
To me, JPJ VLT meter is problem to all window film company. Their reading make everyone in trouble. Whatever is it, Raytech company giving JPJ guarantee in this issue.
If you looking for premium quality tint with reasonable price. Raytech Window Film might be the best choice for you.

Check this out:

*
hi, can you pm me me as well,
looking for security tint high IRR and dark.
thanks.
Proton Persona.
history991
post Apr 12 2014, 09:35 AM

New Member
*
Newbie
0 posts

Joined: Jan 2014
Anyone can help recommend range frm rm300 to rm400 with good heat rejection for my myvi? Thx - frm puchong

This post has been edited by history991: Apr 12 2014, 09:38 AM
San83
post Apr 12 2014, 10:01 AM

New Member
*
Junior Member
8 posts

Joined: Dec 2013
Hi Situ n dealers,

I m looking tinting for estima. Heat rejection is my concern. Looking quotation for V-kool, Raytech , 3m or Llumar.( model, spec n price , warranty , location )

Can Pm me? Or reply here?
OOOOEE
post Apr 13 2014, 01:23 PM

New Member
*
Newbie
0 posts

Joined: Apr 2014
QUOTE(kahjye @ Mar 25 2014, 10:46 PM)
how much u paid bro? im intereested as well
*
Can pls pm me the price too? Will tunt my car with 3M soon. Thanks!
chaozhe
post Apr 14 2014, 12:26 PM

New Member
*
Junior Member
4 posts

Joined: Jul 2011


Hi.. I am looking for V-Kool 55, Agard 695 Tint for Honda civic 2012,
i am from kuching.. Pls pm me or reply me here..Budget RM1xxx-2xxx
ah_suknat
post Apr 14 2014, 04:34 PM

whoooooooooooooop
*******
Senior Member
5,170 posts

Joined: Jul 2006
From: /k//k/, /k/undasang



just wanna ask, if I tinted side and back, but didnt tinted the front windscreen, is it a waste of money? still same hot when park compare to no tint all of them at all?

GTR
post Apr 14 2014, 08:23 PM

Regular
******
Senior Member
1,422 posts

Joined: Jan 2003
hi guys, what to do if u found dirt/particle trapped between the window & tint film? will the shop fix it?
lonely143
post Apr 14 2014, 09:38 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(ah_suknat @ Apr 14 2014, 04:34 PM)
just wanna ask, if I tinted side and back, but didnt tinted the front windscreen, is it a waste of money? still same hot when park compare to no tint all of them at all?
*
Funny setup, you are driving and front did not have tint. What do you think?
lonely143
post Apr 14 2014, 09:39 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(GTR @ Apr 14 2014, 08:23 PM)
hi guys, what to do if u found dirt/particle trapped between the window & tint film? will the shop fix it?
*
If there 1 or 2 tiny dirt on the windows, its normal but depends on how visible is the dirt
Try to stand 1 feet away from windows, when you still can see it then it consider bad.
If there is more than 5 dirt , can claim as warranty ~

This post has been edited by lonely143: Apr 14 2014, 09:40 PM
ah_fong
post Apr 14 2014, 11:11 PM

On my way
****
Senior Member
540 posts

Joined: Jan 2003
From: penang,KL
i wanna ask i got an offer tint for my new honda city for huper optik c70 front screen and c40 all windows for rm 1700 ! cheap ?
K4iz3n
post Apr 15 2014, 08:09 PM

Getting Started
**
Junior Member
212 posts

Joined: May 2010
Recently bought a car. SA gave free Llumar 6 mil security tinting. The thing is the tint is close to stock window, almost no tint. I want to install a tint on top of my security tint.

1. Will this cause problem with power window in the future as 6 mil is already heavy?
2. If I ever need to remove the tint and leave the 6 mil, would it be possible?
carrick5789
post Apr 16 2014, 02:45 PM

New Member
*
Junior Member
39 posts

Joined: Sep 2010


I just got my new car today. Can any sifu or dealers here recommend me on the tinting service and price? My budget is 1k+-, KL/Sel area. My car is C-segment car and red colour. You guys may pm me as well. Thanks.
cchyun198
post Apr 16 2014, 04:58 PM

New Member
*
Newbie
0 posts

Joined: Apr 2014
QUOTE(ah_fong @ Apr 14 2014, 11:11 PM)
i wanna ask i got an offer tint for my new honda city for huper optik c70 front screen and c40 all windows for rm 1700 ! cheap ?
*
which area a u? it's consider cheap, in my area here quoted me
rm 2800 !!
ah_fong
post Apr 16 2014, 05:28 PM

On my way
****
Senior Member
540 posts

Joined: Jan 2003
From: penang,KL
QUOTE(cchyun198 @ Apr 16 2014, 04:58 PM)
which area a u? it's consider cheap, in my area here quoted me
rm 2800 !!
*
in penang !if kl cheaper i might wanna wait till i go back kl and do !
keenhawk
post Apr 16 2014, 08:23 PM

Getting Started
**
Junior Member
166 posts

Joined: Apr 2011
Please pm me for LLumar tinted with 30% discount. All car type. Helping friend promoting. Thanks.
MrFaiiz
post Apr 18 2014, 09:16 AM

New Member
*
Junior Member
4 posts

Joined: Dec 2010


Dear Sifu's and Masters of Tints,

Im getting my new City next week so im doing some research on tints.

By any chance can anyone suggest a good brrand? my Budget is around 1.5k.

I got an offer for 3M Tint = Front & rear Crystalline, Side Nano 40S = 1.8k

By any chance i can get a better price?

Thank you sifus. smile.gif
tachlio
post Apr 18 2014, 12:11 PM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
QUOTE(MrFaiiz @ Apr 18 2014, 09:16 AM)
Dear Sifu's and Masters of Tints,

Im getting my new City next week so im doing some research on tints.

By any chance can anyone suggest a good brrand? my Budget is around 1.5k.

I got an offer for 3M Tint = Front & rear Crystalline, Side Nano 40S = 1.8k

By any chance i can get a better price?

Thank you sifus. smile.gif
*
Front is crystalline what??

Where is the shop?

Ampang quote me same price
MrFaiiz
post Apr 18 2014, 12:35 PM

New Member
*
Junior Member
4 posts

Joined: Dec 2010


QUOTE(tachlio @ Apr 18 2014, 12:11 PM)
Front is crystalline what??

Where is the shop?

Ampang quote me same price
*
This is the message he sent to me.
"For honda city, Crystalline+Nano safety 40s can do for RM1800"

Its 3M, i dont know what type of crystalline. Dont know if its a good offer or maybe i can get better.

I think this shop is in Kota Damansara one.

Whats you opinion? hmm.gif hmm.gif
winkiedilwy
post Apr 18 2014, 01:40 PM

Imma farting carrots.
*******
Senior Member
2,343 posts

Joined: Oct 2010
From: Place known for existence of men.


Guys, can recommend anything for a 2007 Camry. Windscreen is not tinted so can feel the heat when driving. Budget around 1k. For 4 windows + 1 windscreen only. Rear windscreen just recently tinted. Nothing fancy. Thanks.
tachlio
post Apr 18 2014, 03:16 PM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
For Penang user,

3M web only show Neuton dealer but actually 3M do had other authorize dealer (grade B).

Some of them, even having HO & 3M together for compare, go google them,

If u bought from those grade b dealer , 3M inform that must request E-warranty from those dealer so you get protected.

Neuton offer limited choice and price is higher...
** searching tinted for my NHC.

i will update after confirm the price with related dealer
mohdfauziahmad
post Apr 18 2014, 08:31 PM

New Member
*
Newbie
0 posts

Joined: Nov 2010
Hello guys. Im about to buy new vios. Can suggest me a good tinted? And also affordable. Budget under 2k. Thanks.
kapultek
post Apr 19 2014, 09:00 AM

Regular
******
Senior Member
1,376 posts

Joined: Oct 2008


Will get my accord next week...
Do pm me nice offer for branded tinted near putrajaya bangi area....
Do pm me nice price...or maybe better get for SA offer...
And please also quote for civic... for my friend..tq
MGM
post Apr 20 2014, 08:03 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
Huper O's TSER for C50s is 49% & C40 is 55%, a diff of 6%. Is this significant?
Lord Gitsy
post Apr 20 2014, 11:58 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(MGM @ Apr 20 2014, 08:03 PM)
Huper O's TSER for C50s is 49% & C40 is 55%, a diff of 6%. Is this significant?
*
6% of TSER make great different. The price i believe also different.
MGM
post Apr 22 2014, 05:06 AM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(Lord Gitsy @ Apr 20 2014, 11:58 PM)
6% of TSER make great different. The price i believe also different.
*
Pricewise not much diff but C50S-4million with TSER of 49% is a security film whereas C40 with TSER of 55% is not.
ir5
post Apr 22 2014, 05:36 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012


QUOTE(MGM @ Apr 22 2014, 05:06 AM)
Pricewise not much diff but C50S-4million with TSER of 49% is a security film whereas C40 with TSER of 55% is not.
*
May i know where's the authorized Huper Optik shop? I think i saw one at seri kembangan/serdang raya (near Bank Rakyat Serdang Raya)? Is that the one? Also, any contact/email to ask for any query?
I'm trying to find the best car tinted brand for my re-tint old car ;p
MGM
post Apr 22 2014, 06:59 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(ir5 @ Apr 22 2014, 05:36 PM)
May i know where's the authorized Huper Optik shop? I think i saw one at seri kembangan/serdang raya (near Bank Rakyat Serdang Raya)? Is that the one? Also, any contact/email to ask for any query?
I'm trying to find the best car tinted brand for my re-tint old car ;p
*
You can contact this guy:
https://forum.lowyat.net/topic/2374620

hilmyrusli87
post Apr 23 2014, 09:48 AM

New Member
*
Junior Member
6 posts

Joined: Jan 2012


QUOTE(tachlio @ Apr 18 2014, 03:16 PM)
For Penang user,

3M web only show Neuton dealer but actually 3M do had other authorize dealer (grade B).

Some of them, even having HO & 3M together for compare, go google them,

If u bought from those grade b dealer , 3M inform that must request E-warranty from those dealer so you get protected.

Neuton offer limited choice and price is higher...
** searching tinted for my NHC.

i will update after confirm the price with related dealer
*
hi bro
any news about the other dealer than Neuton?
Xander-G
post Apr 23 2014, 02:23 PM

Casual
***
Junior Member
316 posts

Joined: Mar 2014
Howdy, ive been wondering since ive been seeing some colored tints like gold,green and blue-ish that worn on prestige cars like BMW, Merc and Porsche. What this colored tint films actually do beside being colorish?
Anti-theft? Extra UV protection? or simply for style purpose only?
lonely143
post Apr 23 2014, 06:29 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Xander-G @ Apr 23 2014, 02:23 PM)
Howdy, ive been wondering since ive been seeing some colored tints like gold,green and blue-ish that worn on prestige cars like BMW, Merc and Porsche. What this colored tint films actually do beside being colorish?
Anti-theft? Extra UV protection? or simply for style purpose only?
*
Most of them are dye film, it for fancy purpose ~
Lord Gitsy
post Apr 23 2014, 06:54 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xander-G @ Apr 23 2014, 02:23 PM)
Howdy, ive been wondering since ive been seeing some colored tints like gold,green and blue-ish that worn on prestige cars like BMW, Merc and Porsche. What this colored tint films actually do beside being colorish?
Anti-theft? Extra UV protection? or simply for style purpose only?
*
Hi bro,

Sometimes, people love to be colorful and more reflective for privacy purpose.
Nowadays, everybody looking for safety + solar film for their car as the price is almost the same.

I can recommend Raytech Centurion 4mil to you.

- 95% IR Rejection and 62% TSER
- 99.9% UV protection.
- Natural Black color, non-reflective.
- Safety film 4mil can support up to 136lb impact.
- Certified by ANSI - America National Standard Institute.
- GPS and Smartag Friendly

nxtpg
post Apr 23 2014, 07:16 PM

On my way
****
Junior Member
601 posts

Joined: Mar 2013
QUOTE(tachlio @ Apr 18 2014, 03:16 PM)
For Penang user,

3M web only show Neuton dealer but actually 3M do had other authorize dealer (grade B).

Some of them, even having HO & 3M together for compare, go google them,

If u bought from those grade b dealer , 3M inform that must request E-warranty from those dealer so you get protected.

Neuton offer limited choice and price is higher...
** searching tinted for my NHC.

i will update after confirm the price with related dealer
*
how is Breyton located in crystal point?

why cant they give us a few types to choose instead only proving details for what we only inquire...

very hard to make a decision
tomry
post Apr 24 2014, 03:00 PM

Getting Started
**
Junior Member
114 posts

Joined: Sep 2013


dear all , anyone can provide clues on how much is the cost for
1) raytech centurion 4 mil
2) v-cool

for mitsubishi asx
timothy3232
post Apr 24 2014, 03:32 PM

New Member
*
Newbie
0 posts

Joined: Dec 2009
QUOTE(lonely143 @ Apr 23 2014, 06:29 PM)
Most of them are dye film, it for fancy purpose ~
*
hi any recommendations for darker film which about 40% visibilty with superb heat rejection ?
dtna7
post Apr 24 2014, 04:07 PM

Casual
***
Junior Member
456 posts

Joined: Sep 2009
Would like to question the credibility of Llumar tint

The diamond 6 is rated at VLT63% and could bump up the TSER to 59%
This is the highers VLT i could find that comes with a very high TSER as well.

Does anyone verify these numbers? Associations or gov agency?

P.S: Couldn't match the same tint with Llumar USA website. Different product line up altogether? blink.gif

This post has been edited by dtna7: Apr 24 2014, 04:10 PM
lonely143
post Apr 24 2014, 11:24 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(tomry @ Apr 24 2014, 03:00 PM)
dear all , anyone can provide clues on how much is the cost for
1) raytech centurion 4 mil
2) v-cool

for mitsubishi asx
*
For VKool price range RM1000 to RM 3000 ++
fong928
post Apr 27 2014, 08:20 AM

New Member
*
Junior Member
13 posts

Joined: Mar 2006


heard sa said that cx5 couldnt be tinted with security film more than 4 mills?
due to the window glass is tight fit to the rubber, there will be problem if using higher thickness of security film.......
is anybody tried?
jimmyttl
post Apr 27 2014, 04:54 PM

Getting Started
**
Junior Member
81 posts

Joined: Dec 2005


QUOTE(fong928 @ Apr 27 2014, 08:20 AM)
heard sa said that cx5 couldnt be tinted with security film more than 4 mills?
due to the window glass is tight fit to the rubber, there will be problem if using higher thickness of security film.......
is anybody tried?
*
Did a 6mm tinting with Raytech. Seems fine to me.
fong928
post Apr 27 2014, 06:42 PM

New Member
*
Junior Member
13 posts

Joined: Mar 2006


QUOTE(jimmyttl @ Apr 27 2014, 04:54 PM)
Did a 6mm tinting with Raytech. Seems fine to me.
*
ok, thats good, thanks for your infor.

so hows raytech heat rejection ? nice?
kapultek
post Apr 27 2014, 07:22 PM

Regular
******
Senior Member
1,376 posts

Joined: Oct 2008


Me using cs85 raytech n v97 for front quite satisfied...
happiesdog
post Apr 28 2014, 12:22 AM

New Member
*
Newbie
1 posts

Joined: Oct 2009
QUOTE(kapultek @ Apr 27 2014, 07:22 PM)
Me using cs85 raytech n v97 for front quite satisfied...
*
Do u find the V97 for the front is too dark? Comparing between ultra 70 n V97 but worry that the v97 is not JPJ compliant.

Btw, is your v97 smart tag friendly?
kapultek
post Apr 28 2014, 12:47 AM

Regular
******
Senior Member
1,376 posts

Joined: Oct 2008


Ok for my smart tag...they told me jpj compliance..
Lord Gitsy
post Apr 28 2014, 04:42 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Joe Kreutz @ Apr 28 2014, 04:24 PM)
Hi guys, I just got my car tinted today. But there's too many small bubbles on the driver's door window.. I asked the guy in the shop about it and he said its normal and it will go away after 1-2 weeks

My question is, is this normal?? Will all the small bubbles go away?? rclxub.gif  rclxub.gif
My concern is because the other 3 windows + the back window is perfectly done, and there's no or very little bubbles..

Can anybody here confirm me that the bubbles will go away after 1 week??
*
Normally If the small bubbles can not go away within 3-4 days, you just drive the car back to the tinting shop request for warranty claim.
I think they will do for you.
lonely143
post Apr 28 2014, 06:57 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Joe Kreutz @ Apr 28 2014, 04:24 PM)
Hi guys, I just got my car tinted today. But there's too many small bubbles on the driver's door window.. I asked the guy in the shop about it and he said its normal and it will go away after 1-2 weeks

My question is, is this normal?? Will all the small bubbles go away?? rclxub.gif  rclxub.gif
My concern is because the other 3 windows + the back window is perfectly done, and there's no or very little bubbles..

Can anybody here confirm me that the bubbles will go away after 1 week??
*
That's is normal, we call it as curing period
Refer here statement No.10 http://www.iwfa.com/MemberInfo/MemberResea...tyStandard.aspx

2Mil it take 7-14 days
Up to 4Mil it take 30 days
4Mil to 8Mil it take 60 days

My advise is expose your car to sunlight as much as possible to speed up the curing period~

Xu3r
post Apr 28 2014, 10:28 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



Anyone know the best security film + dark solar film ?

Which brand is better as well ?

I am looking for the darkest certified and will not get stop by traffic police

is it 50% or 40% ? how bout security film ? 3mil or 4mil or 5mil ?

I know that some companies offer you warranty as in if you are caught by police , you can claim from them but seriously i do not have that time to do that like i own a rich company or someething.

My friend had dark and not certified films and most of time get caught at KL highway to JB almost everytime

unless you are a VIP of some company or something

I saw the boss of lavender bread 's car 100% black and security film rated more than 6mil i think , it is also bullet proof stated on the corner sleep.gif

This post has been edited by Xu3r: Apr 28 2014, 10:30 PM
kurty
post Apr 28 2014, 11:28 PM

Getting Started
**
Junior Member
224 posts

Joined: Jun 2009
Let's say I already have tint, and I bought some security film 4mil from USA.

Is it possible to combine? Anyone did that before? will it hinder the windows
Lord Gitsy
post Apr 29 2014, 12:28 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(kurty @ Apr 28 2014, 11:28 PM)
Let's say I already have tint, and I bought some security film 4mil from USA.

Is it possible to combine? Anyone did that before? will it hinder the windows
*
No, you can not combine the film in this way, you will lose the safety function. The safety film is come with special adhesive to strong hold on the glass. The first layer must be safety film.

Senario 1 :
Glass | (1) Solar Film | (2) Safety Film = No safety function

Senario 2 :
Glass | (1) Safety Film | (2) Solar Film = Got safety function.

By the way, safety film is not suitable to tint for front and rear windscreen. if you think your existing film is good, what you need to do is just change the all side windows to safety film, remain the front and rear windscreen film.


Lord Gitsy
post Apr 29 2014, 12:47 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xu3r @ Apr 28 2014, 10:28 PM)
Anyone know the best  security film + dark solar film ?

Which brand is better as well ?

I am looking for the darkest certified and will not get stop by traffic police

is it 50% or 40% ? how bout security film ? 3mil or 4mil or 5mil ?

I know that some companies offer you warranty as in if you are caught by police , you can claim from them but seriously i do not have that time to do that like i own a rich company or someething.

My friend had dark and not certified films and most of time get caught at KL highway to JB almost everytime

unless you are a VIP of some company or something

I saw the boss of  lavender bread 's car 100% black and security film rated more than 6mil i think , it is also bullet proof stated on the corner sleep.gif
*
To compliant with JPJ rules.

Front Windscreen : VLT > 70%
The rest of windows : VLT >50%

The darkest tint you can choose is VLT : 55%, after install on your window glass, I think the VLT will become 50%-52%.
Meaning is not dark at all.
MontBlancRanger
post Apr 29 2014, 01:05 AM

New Member
*
Newbie
3 posts

Joined: Aug 2013
Done my new Kia Cerato tint at Raytech branch in Cheras today and as promised, here is my feedback/testimonial.

Second time sending my car to Raytech and I am satisfied overall. My SA actually offered me Huper Optik and Vesolar but we weren't interested in it. Wife and I are pretty happy with our Cruze which was tinted by Raytech previously.

Called Lord Gitsy a.k.a Sean the night before and he was kind enough to slot me in for the earliest spot today despite the late arrangement notworthy.gif

@Lord Gitsy was patient in answering all the questions thrown to him by my wife today. Wife wanted assurance on getting a good rejection tint with safety thumbup.gif Besides that, he also took time to do a lot of explanations on what's the difference between house brand films and USA films. It's good info and very professional, he knows his stuffs laugh.gif

Overall 10/10 service and workmanship looks good.

Highly recommended Raytech... Keep up the good work thumbup.gif


kurty
post Apr 29 2014, 09:20 AM

Getting Started
**
Junior Member
224 posts

Joined: Jun 2009
QUOTE(Lord Gitsy @ Apr 29 2014, 12:28 AM)
No, you can not combine the film in this way, you will lose the safety function. The safety film is come with special adhesive to strong hold on the glass. The first layer must be safety film.

Senario 1 :
Glass | (1) Solar Film | (2) Safety Film = No safety function

Senario 2 :
Glass | (1) Safety Film | (2) Solar Film = Got safety function.

By the way, safety film is not suitable to tint for front and rear windscreen. if you think your existing film is good, what you need to do is just change the all side windows to safety film, remain the front and rear windscreen film.
*
oh man, what a waste then..

sad.gif

next question, i think my existing tint is dark, around VLT : 55%.
i don't know if it's me or what..
i feel the weather is killing me lately..

my tint is just less than a year old..
i'm thinking of overlaying them with another, higher protection etc.

possible?
Xu3r
post Apr 29 2014, 03:16 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



QUOTE(Lord Gitsy @ Apr 29 2014, 12:47 AM)
To compliant with JPJ rules.

Front Windscreen :  VLT > 70%
The rest of windows : VLT >50%

The darkest tint you can choose is VLT : 55%, after install on your window glass, I think the VLT will become 50%-52%.
Meaning is not dark at all.
*
What % do most original tint cars have ?
lonely143
post Apr 29 2014, 05:01 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(kurty @ Apr 29 2014, 09:20 AM)
oh man, what a waste then..

sad.gif

next question, i think my existing tint is dark, around VLT : 55%.
i don't know if it's me or what..
i feel the weather is killing me lately..

my tint is just less than a year old..
i'm thinking of overlaying them with another, higher protection etc.

possible?
*
You can add another layer of tint on the existing tint but the product warranty will void for both
Lord Gitsy
post Apr 30 2014, 12:39 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(kurty @ Apr 29 2014, 09:20 AM)
oh man, what a waste then..

sad.gif

next question, i think my existing tint is dark, around VLT : 55%.
i don't know if it's me or what..
i feel the weather is killing me lately..

my tint is just less than a year old..
i'm thinking of overlaying them with another, higher protection etc.

possible?
*
Bro, why not you keep the front and back windscreen, change the 4 side windows to safety with high heat rejection.
If you feel is hot if existing film. Chang the front windscreen film also.

Another idea is tint 2nd layer solar film on top of existing film. But both product warranty will void.
Lord Gitsy
post Apr 30 2014, 12:40 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xu3r @ Apr 29 2014, 03:16 PM)
What % do most original tint cars have ?
*
What model of car you driving?
pac82
post Apr 30 2014, 01:49 AM

New Member
*
Newbie
3 posts

Joined: Apr 2014
QUOTE(Lord Gitsy @ Apr 30 2014, 12:40 AM)
What model of car you driving?
*
Hi Lord Gitsy, Please pm for Ultra 70. Mazda 6. Tq
starmexx
post Apr 30 2014, 02:42 AM

New Member
*
Junior Member
11 posts

Joined: Aug 2013
Just dropping by to thanks Raytech and Lord Gitsy for a providing a good service for my brother. Tinted his F10 two weeks ago and overall happy with it.

Once again, well done. Tq!
celciuz
post May 1 2014, 09:37 AM

10k Club
********
All Stars
14,033 posts

Joined: Nov 2004
Hi, I was visited Raytech yesterday and I noticed there is a brochure with prices for each individual Raytech tint for standard/large etc. Where can I get this information online as I was not given that brochure.
jeocity
post May 2 2014, 03:31 PM

New Member
*
Junior Member
21 posts

Joined: Nov 2010


https://www.livingsocial.com/my/cities/1964...7-year-warranty

Have anybody tried this film? Can please share?
LiBERTY_X
post May 2 2014, 09:01 PM

Getting Started
**
Junior Member
99 posts

Joined: Nov 2008
Where can I get huper optik tint in Penang?
lonely143
post May 3 2014, 12:36 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(LiBERTY_X @ May 2 2014, 09:01 PM)
Where can I get huper optik tint in Penang?
*
http://www.smartwindow.com.my/dealers.html
Lord Gitsy
post May 3 2014, 11:58 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(celciuz @ May 1 2014, 09:37 AM)
Hi, I was visited Raytech yesterday and I noticed there is a brochure with prices for each individual Raytech tint for standard/large etc. Where can I get this information online as I was not given that brochure.
*
Hi bro, you can't get the price online. Brochure price is standard in all Raytech outlet.
celciuz
post May 3 2014, 12:06 PM

10k Club
********
All Stars
14,033 posts

Joined: Nov 2004
QUOTE(Lord Gitsy @ May 3 2014, 11:58 AM)
Hi bro, you can't get the price online. Brochure price is standard in all Raytech outlet.
*
Noted, initially was informed the Centurion RX-4mil package with a 95% IRR for windscreen. After some negotiation was given free upgrade to a 97% which they used this term "Deluxe", but was told its another name for the Ultra 70. Was puzzled as I was not able to find a 95% IRR non-security tint from the website earlier, either 97% or 85%.

Was a little surprised when I got a call from Raytech KL that mentioned about RX-4mil comes with Ultra 70 for the windscreen at RM3100. But anyways already booked it with the shop yesterday, let's see how this combination pits against the V-Kool 70 that came FOC with the Teana in terms of heat rejection.
LiBERTY_X
post May 3 2014, 12:42 PM

Getting Started
**
Junior Member
99 posts

Joined: Nov 2008
QUOTE(lonely143 @ May 3 2014, 12:36 AM)
Which of them have the best workmanship?
lonely143
post May 3 2014, 11:08 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(LiBERTY_X @ May 3 2014, 12:42 PM)
Which of them have the best workmanship?
*
I am not sure about that. You gotta drop by to figure out ~
LiBERTY_X
post May 4 2014, 02:30 PM

Getting Started
**
Junior Member
99 posts

Joined: Nov 2008
QUOTE(lonely143 @ May 3 2014, 11:08 PM)
I am not sure about that. You gotta drop by to figure out ~
*
ok no problem thanks
zacktan
post May 4 2014, 06:45 PM

On my way
****
Senior Member
630 posts

Joined: Apr 2008


hi guys, i have a LLumar Diamond 6 to let go.
bought it initially but sold my car so never gotten to install it.
guarantee way cheaper than retail, pls do pm me if you are interested.
pls note this is top of the line tint from LLumar. medium category car costs RM3400.
i'm selling below retail. thanks.
rinkimeki
post May 5 2014, 06:25 PM

Getting Started
**
Junior Member
60 posts

Joined: Sep 2008
Is Eco Tint is a good brand? Any nice or bad story you guys heard of it? Please share sifu...
Xu3r
post May 6 2014, 11:56 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



Is vkool any good?
Xu3r
post May 6 2014, 07:07 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



super gard & risen any good?
Lord Gitsy
post May 8 2014, 11:37 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xu3r @ May 6 2014, 07:07 PM)
super gard & risen any good?
*
All is good as long as it is USA film. The only problem is consumer do not know how to differential it. You are welcome to read my thread on post 2.
How to avoid being cheated with Low Quality Korea Film!
Xu3r
post May 9 2014, 12:08 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



does raytech shop able to install other interior stuffs as well ?

I am thinking have my car install with carbon fiber stickers as well


Is security tint safe ?

I know it is hard to break glass on the outside and what if man trap in a car and want to get out ?[U]

This post has been edited by Xu3r: May 9 2014, 12:41 AM
pac82
post May 9 2014, 02:37 AM

New Member
*
Newbie
3 posts

Joined: Apr 2014
Get my car tint done with Raytech. I choose Raytech due to the many good feedbacks here, USA product, and I'm not regret about it!

I use Centurion 6mil and Ultra 70 on my front windshield. Noticed the big difference and cool as I've been driving my car for 1 week without tinted like oven that time.

Thanks Lordgitsy for good service and super responsive on all my questions.

Highly recommended to everyone!
Lord Gitsy
post May 10 2014, 12:03 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xu3r @ May 9 2014, 12:08 AM)
does raytech shop able to install other interior stuffs as well ?

I am thinking have my car install with carbon fiber stickers as well
Is security tint safe ?

I know it is hard to break glass on the outside and what if man trap in a car and want to get out ?[U]
*
Raytech is only specialist in window tinting at the moment. I think the company may input other product like paint protection or sticker in future. However it is not available now.

About the safety film, there is more things to explain.
1. The main purpose for safety film is delaying break in time maybe about 30 second for you to escape if somebody trying to break your glass.
2. The glass still will be broken when the break strength above 120lb, meaning people still can safety you from outside.
3. Safety film will hold the glass strong to prevent shattered glass flying and injure you.
4. If you want to escape from inside the car. You need special technique to break the glass. watch and learn :
https://www.facebook.com/photo.php?v=763559...&type=2&theater


This post has been edited by Lord Gitsy: May 10 2014, 12:18 AM
heshin
post May 10 2014, 03:34 PM

Getting Started
**
Junior Member
53 posts

Joined: Dec 2009


hi guys, i am surveying as well. was looking for vkool but a bit out of budget. reading through all the posts, it seem like a lot of people recommending Huper optic FWS SECH 60 and other windows either normal C50 / C50 Shield 4 Mil.

1. I cant find SECH 60 in the official website http://www.huperoptik.com/en/smart/index.aspx

2. C50 can be found in link above. It is different with C50 Shield 4 Mil right?

3. From link above still, I believe C50 Shield 4 Mil = Hüper Ceramic 50 Shield - 4 Mil (code C50S-4). am i right?

Anyone can shed some light on above? thanks in advance.
heshin
post May 10 2014, 06:33 PM

Getting Started
**
Junior Member
53 posts

Joined: Dec 2009


After reading whole day. I would like to share my thought with those who are inexperience as me, and looking for good tint + security + JPJ less kacau + reasonable. Don't shoot me too harsh. just my thought ok.

1. Don't go for ayam brand. You will regret.
2. Most recommended: Huper Optik (HO), VKOOL & 3m
3. Security film, for eg: 4 mil, just merely thicker. In general: It takes ~ 8 seconds to break your window with 4 mil tint, while normal tint takes ~ 4. seconds.(subject to skill and tool)
5. Some security film might not have good TSER compare to normal film. So you have to judge you want better heat rejection or want a few more seconds before someone break your car windows.
6. My own experience: Regardless of seller and brand, your friends will get quoted price cheaper than you for rm300~500 for the same spec, or vice versa. That's kinda sad. That's why you only allow to PM for price (so called professional). No choice la. cari makan. i understand. but still a bit sad, cause different too much d. rm100-200 still can accept. but 200~500 is too much. Nobody like to be water fish. So for new guys, always ask your friends for price comparison!
7. Afterall, the most recommended tint spec I found is:
a. HO- FWS & RWS SECH60, All other sides C50S-4mil (security)
b. HO- FWS SECH60, All other sides C40
c. HO - whole car SECH 60.
d. VKOOL - FWS & RWS VKOOL elite, all other sides VKOOL SAFETY 4mil (security)
e. VKOOL - whole car vkool elite.

Brand/Model VKOOLElite SECH60 C70 VKOOLSAFETY4 C50 C40 C50S-4
Visible Light Transmittance 73% 59% 71% 72% 52% 42% 52%
Visible Light Reflectance 8% 8% 10% NA 12% 9% 14%
Ultra-Violet Radiation Rejection 99% 99% 99% 99% 99% 99% 99%
Shading Coefficient 0.50 0.54 0.62 0.61 0.58 0.53 59%
Infra-Red Heat Rejection 94% 83% 91% NA 69% 80% 67%
Total Solar Transmission NA 46% 38% NA 38% 29% 39%
TSER 55% 54% 47% 50% 50% 55% 49%

8. I research the spec above from official website. new inexperience should do so for your prefer tint.

9. Beware of double layer tint, or tint over 6 mil tick, it will spoil your power window. (too heavy i guess?)

10. In the end, balance between the price and the spec is what will you should consider to make your decision.

This post has been edited by heshin: May 10 2014, 07:10 PM
lonely143
post May 10 2014, 09:53 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


After reading whole day. I would like to share my thought with those who are inexperience as me, and looking for good tint + security + JPJ less kacau + reasonable. Don't shoot me too harsh. just my thought ok.

1. Don't go for ayam brand. You will regret.
- Agree, if consumer always can get Ayam brand at Groupon, Living or Deals.

2. Most recommended: Huper Optik (HO), VKOOL & 3m
- Go for International brand.
- Try to get more info on the brands such as certificate, manufacturer, technology and more.
- The more info you get, the more genuine and reputable of the brand.
- Eq. International Brand website usually end up with ".com" while Malaysia is "com.my"
http://www.v-kool.com/ and http://www.v-kool.com.my/

3. Security film, for eg: 4 mil, just merely thicker. In general: It takes ~ 8 seconds to break your window with 4 mil tint, while normal tint takes ~ 4. seconds.(subject to skill and tool)
- Yes, do not believe so much on those safety film video demonstration.
- Sometimes it cost you more to replace the film in case your glass shattered.
- Always remember that safety film is shattered resistant.

5. Some security film might not have good TSER compare to normal film. So you have to judge you want better heat rejection or want a few more seconds before someone break your car windows.
- Depends, some of the security film come with good heat rejection and of course additional cost for it !

6. My own experience: Regardless of seller and brand, your friends will get quoted price cheaper than you for rm300~500 for the same spec, or vice versa. That's kinda sad. That's why you only allow to PM for price (so called professional). No choice la. cari makan. i understand. but still a bit sad, cause different too much d. rm100-200 still can accept. but 200~500 is too much. Nobody like to be water fish. So for new guys, always ask your friends for price comparison!
- The best way is take time to visit the tint that you have selected.

7. Afterall, the most recommended tint spec I found is:
a. HO- FWS & RWS SECH60, All other sides C50S-4mil (security)
b. HO- FWS SECH60, All other sides C40
c. HO - whole car SECH 60.
d. VKOOL - FWS & RWS VKOOL elite, all other sides VKOOL SAFETY 4mil (security)
e. VKOOL - whole car vkool elite.

Brand/Model VKOOLElite SECH60 C70 VKOOLSAFETY4 C50 C40 C50S-4
Visible Light Transmittance 73% 59% 71% 72% 52% 42% 52%
Visible Light Reflectance 8% 8% 10% NA 12% 9% 14%
Ultra-Violet Radiation Rejection 99% 99% 99% 99% 99% 99% 99%
Shading Coefficient 0.50 0.54 0.62 0.61 0.58 0.53 59%
Infra-Red Heat Rejection 94% 83% 91% NA 69% 80% 67%
Total Solar Transmission NA 46% 38% NA 38% 29% 39%
TSER 55% 54% 47% 50% 50% 55% 49%

8. I research the spec above from official website. new inexperience should do so for your prefer tint.
- Well, difference people have difference requirement. However is good to compare all the specification before make decision.

9. Beware of double layer tint, or tint over 6 mil tick, it will spoil your power window. (too heavy i guess?)
- Put double layer tint on your windows is bad choice because
* Cost to replace is double when your glass break !
* Product and summon warranty usually is void !

10. In the end, balance between the price and the spec is what will you should consider to make your decision.
- Yea, but whenever you select the brand you should know your BUDGET !


lonely143
post May 10 2014, 09:55 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(heshin @ May 10 2014, 03:34 PM)
hi guys, i am surveying as well. was looking for vkool but a bit out of budget. reading through all the posts, it seem like a lot of people recommending Huper optic FWS SECH 60 and other windows either normal C50 / C50 Shield 4 Mil.

1. I cant find SECH 60 in the official website http://www.huperoptik.com/en/smart/index.aspx

2. C50 can be found in link above. It is different with C50 Shield 4 Mil right?

3. From link above still, I believe  C50 Shield 4 Mil = Hüper Ceramic 50 Shield - 4 Mil (code C50S-4). am i right?

Anyone can shed some light on above? thanks in advance.
*
Yes, your point no.3 is correct.
Lord Gitsy
post May 12 2014, 01:38 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


After reading whole day. I would like to share my thought with those who are inexperience as me, and looking for good tint + security + JPJ less kacau + reasonable. Don't shoot me too harsh. just my thought ok.

1. Don't go for ayam brand. You will regret.
* Brand that unable to tell you the name of the USA manufacturer and it is not stated in their website.
* No Recognition from their manufacturer.


2. Most recommended: Huper Optik (HO), VKOOL & 3m
- You may include Raytech and Llumar as it is International Brand too.

3. Security film, for eg: 4 mil, just merely thicker. In general: It takes ~ 8 seconds to break your window with 4 mil tint, while normal tint takes ~ 4. seconds.(subject to skill and tool)
* The more accurate explanation is 4mil can support up to 120lbs strength impact.
* A good safety film should stand at least 30 second to buy enough time for escaping.
* In this issue, USA product is very important. Product from Korea is very poor on its safety although it is thick.
* Raytech safety film is certified by ANSI (America National Standard Institute) and we provide live demo in many place.


5. Some security film might not have good TSER compare to normal film. So you have to judge you want better heat rejection or want a few more seconds before someone break your car windows.
* This statement in not true now.
* Product like Raytech Centurion 6mil, Centurion 4mil, 3M Nano 70 & Nano 40 (3mil), V-kool Secure (8mil), Llumar Palladium(9mil) come with high TSER. Some product is available since last year.



6. My own experience: Regardless of seller and brand, your friends will get quoted price cheaper than you for rm300~500 for the same spec, or vice versa. That's kinda sad. That's why you only allow to PM for price (so called professional). No choice la. cari makan. i understand. but still a bit sad, cause different too much d. rm100-200 still can accept. but 200~500 is too much. Nobody like to be water fish. So for new guys, always ask your friends for price comparison!
* Promotion from time to time is different in all company.

7. Afterall, the most recommended tint spec I found is:
* This is very subjective on personal recommended tint. Sometimes, you need to see the budget and the true quality of the film itself.
* I provide 3 important tips to choose the good film.
i) Choose Brand that selling genuine USA product.
ii) Choose Original product for its brand. (Normally come with brand's packaging and logo on the film itself)
iii) Finally, test the tint with spotlight or Solar Meter device.

8. I research the spec above from official website. new inexperience should do so for your prefer tint.
* Original Product name will appear on it's website. Prevent yourself from buying "non-original" product or "House-brand' product.
* Some USA brand authorized dealers selling 90% of "House Brand" product.


9. Beware of double layer tint, or tint over 6 mil tick, it will spoil your power window. (too heavy i guess?)
* Thicker film will disrupt the power window in 1-2 years time.
* Double layer normally not compliant with JPJ.


10. In the end, balance between the price and the spec is what will you should consider to make your decision.
* Window Film warranty period is very long and Malaysia weather is very humid and hot.
* If you got budget RM1-2K. Just get the best tint in your car and enjoy the best protection.


_ The End_
getalong6165
post May 12 2014, 05:58 PM

Getting Started
**
Junior Member
177 posts

Joined: Jul 2012
guys,can advice me on which tint should i go for my new myvi. hav a rm350 voucher for solar security tint at raytech given by my car sales agent.
icelc
post May 15 2014, 10:35 PM

New Member
*
Junior Member
44 posts

Joined: Dec 2006
Hi Guys,

I just tint my honda city 2 week ago with v-kool elite from tint shop. During night time, my back windscreen reflects light very badly and it makes it very difficult to see. Is this normal?

user posted image

user posted image


This is my 2nd time tint with tint shop with v-kool elite. Previously my MyVi have no problem at all. Is this a tinting method goes awry or the tinting paper have problem?

Should I go back the shop or go to V-Kool center to rectify?
Lord Gitsy
post May 15 2014, 10:43 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(icelc @ May 15 2014, 10:35 PM)
Hi Guys,

I just tint my honda city 2 week ago with v-kool elite from tint shop. During night time, my back windscreen reflects light very badly and it makes it very difficult to see. Is this normal?

user posted image

user posted image
This is my 2nd time tint with tint shop with v-kool elite. Previously my MyVi have no problem at all. Is this a tinting method goes awry or the tinting paper have problem?

Should I go back the shop or go to V-Kool center to rectify?
*
Hi bro, myvi or normal MPV will not have this problem as the rear windscreen is quite vertical, but compare to slope rear windscreen for saloon car, this phenomena is very normal. I see it in many cars too.
icelc
post May 15 2014, 10:46 PM

New Member
*
Junior Member
44 posts

Joined: Dec 2006
QUOTE(Lord Gitsy @ May 15 2014, 10:43 PM)
Hi bro, myvi or normal MPV will not have this problem as the rear windscreen is quite vertical, but compare to slope rear windscreen for saloon car, this phenomena is very normal. I see it in many cars too.
*
But its very difficult to see especially dark area with many cars. The light refraction is even worse than before I tint.

There is no way to solve this other than to remove the tint?
sheenho
post May 16 2014, 12:30 AM

On mah way! :D
****
Senior Member
688 posts

Joined: Nov 2008
From: SIK


Hi,

I notice that Llumar is not really favoured by the forummers here.
May I know what is possibly the reason? blush.gif

So my wife just got a new Vios, and I want to install security tint film for it.
Been asking around and these caught my attention. My budget is roughly 1.5k.

Llumar T4-50 for side windows
ATR 50 for FWS and RWS.
RM1799

Huper Optik 4 mil for side windows
Solar Gard for FWS and RWS.
(Can't remember the models for this offer.)
RM1400

So, any comment?
Thanks.
lonely143
post May 16 2014, 12:43 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(icelc @ May 15 2014, 10:35 PM)
Hi Guys,

I just tint my honda city 2 week ago with v-kool elite from tint shop. During night time, my back windscreen reflects light very badly and it makes it very difficult to see. Is this normal?

user posted image

user posted image
This is my 2nd time tint with tint shop with v-kool elite. Previously my MyVi have no problem at all. Is this a tinting method goes awry or the tinting paper have problem?

Should I go back the shop or go to V-Kool center to rectify?
*
Normally it happen on the sedan car model.
You will not find this problem on hatchback car model.

The reason is the windscreen for sedan car (45 degree) is more curve than the hatchback car (90 degree)
Xu3r
post May 16 2014, 01:32 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



There are so many good raytech tint films

I do not know what to buy lol


pablopabla
post May 16 2014, 08:32 AM

New Member
*
Newbie
3 posts

Joined: Oct 2008
QUOTE(icelc @ May 15 2014, 10:35 PM)
Hi Guys,

I just tint my honda city 2 week ago with v-kool elite from tint shop. During night time, my back windscreen reflects light very badly and it makes it very difficult to see. Is this normal?

user posted image

user posted image
This is my 2nd time tint with tint shop with v-kool elite. Previously my MyVi have no problem at all. Is this a tinting method goes awry or the tinting paper have problem?

Should I go back the shop or go to V-Kool center to rectify?
*
It is dangerous to drive with this kind of reflection. No tinting should give this kind of vision / refraction quality.

You should ask for a replacement or bring the matter to the Consumer Tribunal. Exercise your rights as a consumer.
MGM
post May 16 2014, 11:32 AM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
If my Hyundai Sonata YF is already slightly tinted, by applying new tint of VLT-70% for FWS and VLT 50% for the rest would I still be safe from Operation like this:
http://www.thestar.com.my/News/Nation/2014...em-before-crac/
croomaniac
post May 16 2014, 06:40 PM

Getting Started
**
Junior Member
269 posts

Joined: Jan 2003


QUOTE(icelc @ May 15 2014, 10:35 PM)
Hi Guys,

I just tint my honda city 2 week ago with v-kool elite from tint shop. During night time, my back windscreen reflects light very badly and it makes it very difficult to see. Is this normal?

user posted image

user posted image
This is my 2nd time tint with tint shop with v-kool elite. Previously my MyVi have no problem at all. Is this a tinting method goes awry or the tinting paper have problem?

Should I go back the shop or go to V-Kool center to rectify?
*
Dangerous enough. I've driven my friend's who got this issue and it was painful to the eye (front windshield lah).. Recommend to change asap..

Btw, i was thinking to get a good ones too - Raytech [after a quite a number of review] but deciding to go for an ayam ones first (coz i feel raped inside a tintless car) and Malaysia weather - you guys know lah.. very hot that you can break an egg onto the windscreen and it can just turned into fried eggs.. So far i have no issue like you (the spreading light) and also Smart Tag issue..

My previous free tint for my previous car was from Auto Tint, and up till today (after 6 years) the tint is still OK, no bubbles no nothing. Though the heat rejection is not as good as the expensive ones, but i think it is OK..

I did a RM350 tint - +- 60% heat rejection, 50% dark.. The whole car, mind you, but not the windscreen (lighter than the rest).. But since all other windows are 50% black, it is much acceptable for me. 5 years warranty, long enough for me who is planning to use it for a bout a year or so, before going for premium ones..

Why not Security Tint? Well, security tint will only slowing the thief to break into your car je.. cross fingers.. just don't lure them to your car then.. put valuables unseen in the first sight.. i can still see people showing off their RM120 Smart Tags which will later cost you RM200 mirrors.. + RM100 re-tint.. My other friends 'showing off his coins' at the dashboard which again, cost him lots more $$ just to replace the damage..

Anyway, my advice would be: go for any tint that are in your budget now.. if it is RM160 for the whole car, if it can stay stick for a year, its a bargain.. If you have budget for more expensive tint, by all means just do it.. those very expensive ones didn't guarantee you that they can block the heat 100% though, your car can still feel the hotness if you park under the hot sun (i bet you) and a tint can actually helped your car to prevent harsh sunny hot temp break into your windscreen freely then.. they'll block them, but the heat can always break in..

Perhaps, only myself feeling the nakedness while driving tintless car, thats why i chose for 50% tint.. at least i can feel 50% more not naked then before.. no point going for 100% as you will be loved by the Police, JPJ & Puspakom then.. Happy tinting!

P/S: during my installation, there was this BMW6 series tinting in the shop. OK, relief a little while as it can assure me that their tints are not that ayams.. haha (but the BM went for 100% dark lah) whistling.gif
Axell
post May 17 2014, 12:43 PM

Looking for FL
*****
Senior Member
920 posts

Joined: Jun 2007
From: Somewhere in Malaysia


QUOTE(getalong6165 @ May 12 2014, 05:58 PM)
guys,can advice me on which tint should i go for my new myvi. hav a rm350 voucher for solar security tint at raytech given by my car sales agent.
*
You can go for CS60 with medium price, I'm using that right now smile.gif You can contact DaBestOne, honest and friendly guy. thumbup.gif

At first, found his contact in lowyat garage and wanted to tint the cheapest one which cost RM200. But I choose the CS60 which I can say their middle range, they selling low range, middle range and high range with 5-7 years warranty. So you can choose depends on your budget.

Completed the tint on my car, then the next day I found a bubble on driver window (Not to blame them but you know la, we are not perfect hehe). I informed it to DaBestOne and he asked me to go the Raytech shop, they replaced me with a new tint. Overall I'm satisfied with their services, recommended seller and I'm cool with Raytech brand hehe I found their logo also looks cool

This post has been edited by Axell: May 17 2014, 12:43 PM
getalong6165
post May 17 2014, 06:25 PM

Getting Started
**
Junior Member
177 posts

Joined: Jul 2012
QUOTE(Axell @ May 17 2014, 12:43 PM)
You can go for CS60 with medium price, I'm using that right now smile.gif You can contact DaBestOne, honest and friendly guy.  thumbup.gif

At first, found his contact in lowyat garage and wanted to tint the cheapest one which cost RM200. But I choose the CS60 which I can say their middle range, they selling low range, middle range and high range with 5-7 years warranty. So you can choose depends on your budget.

Completed the tint on my car, then the next day I found a bubble on driver window (Not to blame them but you know la, we are not perfect hehe). I informed it to DaBestOne and he asked me to go the Raytech shop, they replaced me with a new tint. Overall I'm satisfied with their services, recommended seller and I'm cool with Raytech brand hehe I found their logo also looks cool
*
I've done mine as well for today. Though i did not use the voucher as i needed to pay an extra of rm6xx for the solar security film. Chosen the cheaper option of just the solar control which provide 60% of block front screen and 50% for the sides.
Axell
post May 17 2014, 07:21 PM

Looking for FL
*****
Senior Member
920 posts

Joined: Jun 2007
From: Somewhere in Malaysia


QUOTE(getalong6165 @ May 17 2014, 06:25 PM)
I've done mine as well for today. Though i did not use the voucher as i needed to pay an extra of rm6xx for the solar security film. Chosen the cheaper option of just the solar control which provide 60% of block front screen and 50% for the sides.
*
Why you didn't use the voucher?
getalong6165
post May 17 2014, 07:57 PM

Getting Started
**
Junior Member
177 posts

Joined: Jul 2012
QUOTE(Axell @ May 17 2014, 07:21 PM)
Why you didn't use the voucher?
*
voucher oni applies to solar security tint and not on solar control tint. if i take the solar security tint, i would need to pay an additional rm6xx as the ori price is rm1k for the cheapest 4mil. so i decide to take a 2mil since its still within my budget. so, yea, a waste of rm300 voucher but i pay less. which i am ok with it.
Neoson
post May 18 2014, 01:14 AM

New Member
*
Newbie
0 posts

Joined: May 2014
QUOTE(pac82 @ May 9 2014, 02:37 AM)
Get my car tint done with Raytech. I choose Raytech due to the many good feedbacks here, USA product, and I'm not regret about it!

I use Centurion 6mil and Ultra 70 on my front windshield. Noticed the big difference and cool as I've been driving my car for 1 week without tinted like oven that time.

Thanks Lordgitsy for good service and super responsive on all my questions.

Highly recommended to everyone!
*
Please quote for Accord. thanks.

cannavaro
post May 18 2014, 11:57 AM

CATTENACIO
*******
Senior Member
3,008 posts

Joined: Sep 2005
From: T.T.D.I, Bukit Damansara


I'd ignore the so called discount vouchers from SA and go directly to the shop.. they get commission you know; and that means you will get lesser discount when you bargain.

Oh and a shout out for Raytech, had 3 of my cars done by their cheras outlet. thumbup.gif
One car recently went for engine transplant and as expected the FWS tint was removed during PUSPAKOM inspection. (it was the pro series rich gold, this one is not available anymore)
So went back to raytech and retint the FWS. biggrin.gif
CyberSundayz
post May 18 2014, 10:26 PM

★★★★★★★★★
******
Senior Member
1,850 posts

Joined: Feb 2008



Hii guys nak tanya..my car (Naza Suria belum tinted) kat windsheild dia tulis 75%
& cermin tepi 70%..kalau nak tinted boleh ke cermin tepi saja bagi 50% boleh ke?
50% max JPJ lepas kan?
Xu3r
post May 18 2014, 10:32 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



Which raytech tint is the best and certified JPJ ?

I am looking for a security and solar tint
happiesdog
post May 19 2014, 02:15 AM

New Member
*
Newbie
1 posts

Joined: Oct 2009
I would like to send my compliment to @Lord Gitsy who assisted me over numbers of queries on choosing the right tinting, especially on Raytech product. He gave me very fair advise on different kind of tinting even it is a non Rqytech product. I must say he is very professional and he knows his stuff very well. Although eventually I did not purchase the Raytech from him but he is still very kind to assist me and even thanks me for supporting Raytech as the choice of window film for my new car. Thumb up for him.

I have installed Raytech CS85 + V97 for my new car, so far there is no super sunny day yet but I'm still impressed by the performance of this product, really value for money if compare with other international brand. The heat rejection is good and I hardly need to turn my air-cond to high fan speed compared to my previous car. Can't imagine the effect of their top range centurion product which come with higher TSER%. For the V97 I think is just too dark for FWS but it does provide better security for whoever is in the car.
happiesdog
post May 19 2014, 02:16 AM

New Member
*
Newbie
1 posts

Joined: Oct 2009
QUOTE(Xu3r @ May 18 2014, 10:32 PM)
Which raytech tint is the best and certified JPJ ?

I am looking for a security and solar tint
*
Can consider Centurion RX-4 mil for the side and Ultra 70 for the front.

Cheers.
eugene.yong
post May 19 2014, 01:51 PM

New Member
*
Newbie
0 posts

Joined: Dec 2013
Would like to thank lord glitsy for his assistance and help in helping me understand car tinting better. Highly recommend his outlet if you're considering raytech tinting.
Axell
post May 19 2014, 02:43 PM

Looking for FL
*****
Senior Member
920 posts

Joined: Jun 2007
From: Somewhere in Malaysia


QUOTE(Xu3r @ May 18 2014, 10:32 PM)
Which raytech tint is the best and certified JPJ ?

I am looking for a security and solar tint
*
As I been informed, not certified by JPJ but it compliance with our local authorities which is JPJ. It is in their warranty also, if you kena saman Raytech will settle for you.

You can contact DaBestOne or Lord Gitsy, btw I done my tint with DaBestOne thumbup.gif
Xu3r
post May 19 2014, 02:54 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



QUOTE(Axell @ May 19 2014, 02:43 PM)
As I been informed, not certified by JPJ but it compliance with our local authorities which is JPJ. It is in their warranty also, if you kena saman Raytech will settle for you.

You can contact DaBestOne or Lord Gitsy, btw I done my tint with DaBestOne  thumbup.gif
*
But i read a newspaper last few days that it charge 300$ or more each time
Xu3r
post May 19 2014, 05:54 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



Best raytech tint are


Ultra 70
centurion?


Install both together?
yikhoe
post May 19 2014, 07:02 PM

Getting Started
**
Junior Member
63 posts

Joined: Oct 2004
I'm also looking for a above average car tint. Not looking to spend a fortune but just want to feel cool in the car. Thickness don't really matter much but prefer 4 mil, used to have 6 mil and start screwing up with power windows as if the screen about to get stuck.

Advise anyone?
HappyForever16
post May 19 2014, 07:17 PM

New Member
*
Newbie
7 posts

Joined: Jan 2014
Hi I am not so pro in window tint. I order honda city quite sometime ago and the SA offer me Raytech 4mil. Visible light transmittance 58% reflective 15% uv rejection 99% infrared rejection 95% total solar energy rejection 62%. The offer price is RM3100.

I personally feel very expensive. Can sifus advice me a bit on it? Can i go for this tint and is this price reasonable?
Lord Gitsy
post May 20 2014, 12:02 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xu3r @ May 19 2014, 05:54 PM)
Best raytech tint are
Ultra 70
centurion?
Install both together?
*
Raytech Ultra 70 is for front windscreen and Centurion Series is safety film can be install for other windows.
Lord Gitsy
post May 20 2014, 12:05 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(yikhoe @ May 19 2014, 07:02 PM)
I'm also looking for a above average car tint. Not looking to spend a fortune but just want to feel cool in the car. Thickness don't really matter much but prefer 4 mil,  used to have 6 mil and start screwing up with power windows as if the screen about to get stuck.

Advise anyone?
*
Most of safety film 4mil - 6mil will not spoilt your car power window. I'm not recommended safety film thicker than 6mil film.
Xu3r
post May 20 2014, 01:59 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



QUOTE(Lord Gitsy @ May 20 2014, 12:02 AM)
Raytech Ultra 70 is for front windscreen and Centurion Series is safety film can be install for other windows.
*
does raytech tint produce those rainbow side effects ?
catfish0001
post May 20 2014, 09:35 AM

New Member
*
Junior Member
27 posts

Joined: Aug 2009
with the jpj currently actively looking for all the dark tint, and already make a statement that no company are supposedly able to provide the guarantee jpj compliant and able to bypass the summons, i dont think now the right moment for the tinted procedure.
Xu3r
post May 20 2014, 10:11 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



QUOTE(catfish0001 @ May 20 2014, 09:35 AM)
with the jpj currently actively looking for all the dark tint, and already make a statement that no company are supposedly able to provide the guarantee jpj compliant and able to bypass the summons, i dont think now the right moment for the tinted procedure.
*
Yeah i read a chinese newspaper and it will fine AT LEAST 300$ depending the darkness level

Raytech looks popular and 50k facebook likes


I am considering their best solar and security tint while also jpj certified
lonely143
post May 20 2014, 05:39 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(catfish0001 @ May 20 2014, 09:35 AM)
with the jpj currently actively looking for all the dark tint, and already make a statement that no company are supposedly able to provide the guarantee jpj compliant and able to bypass the summons, i dont think now the right moment for the tinted procedure.
*
Yes, your fact is right. We selling film base on the JPJ requirement which is

Front - 70% VLT above
All side and rear - 50% VLT above

When you purchase film from certain company and the film VLT is within the JPJ rules,
the company will cover up your summon.
dtna7
post May 20 2014, 06:11 PM

Casual
***
Junior Member
456 posts

Joined: Sep 2009
QUOTE(HappyForever16 @ May 19 2014, 07:17 PM)
Hi I am not so pro in window tint. I order honda city quite sometime ago and the SA offer me Raytech 4mil. Visible light transmittance 58% reflective 15% uv rejection 99% infrared rejection 95% total solar energy rejection 62%. The offer price is RM3100.

I personally feel very expensive. Can sifus advice me a bit on it? Can i go for this tint and is this price reasonable?
*
Something is fishy here.

The only TSER with 62% i can see here is the Centurion that only has VLT 53%. And 53% is pretty dark and risky at this kind of "season"
https://forum.lowyat.net/topic/2918371/all

This post has been edited by dtna7: May 20 2014, 06:11 PM
Xu3r
post May 20 2014, 10:22 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



Can any pro raytech tint owners / staff able to confirm that raytech ultra 70 and centurion are certified ? Are these the best available for raytech ?

I am planning to have them install soon





According to an official release by PDRM, this prominently includes:

Illegal window tinting that’s beyond the legal limits of allowing 70% of light through the front windshield and 50% of light through the side and rear windows and windshield
Licence plates that aren’t in accordance with allowed specifications for size and position
Unauthorised use of strobe, or flashing lights on vehicles

After June 15, anyone still using any of the above can and will be subject legally to a RM300 fine at least and on the spot by the police. Higher darkness level by % will increased from 300 - 600
Lord Gitsy
post May 20 2014, 11:49 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(dtna7 @ May 20 2014, 06:11 PM)
Something is fishy here.

The only TSER with 62% i can see here is the Centurion that only has VLT 53%. And 53% is pretty dark and risky at this kind of "season"
https://forum.lowyat.net/topic/2918371/all
*
Raytech Centurion 4mil VLT 58%, VLR 15%, IRR95% and TSER 62%. Check this out.
http://www.raytech.com.my/security-solar-window-film/
Lord Gitsy
post May 21 2014, 12:13 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(Xu3r @ May 20 2014, 10:22 PM)
Can any pro raytech tint owners / staff able to confirm that raytech ultra 70 and centurion are certified ?  Are these the best available for raytech ?

I am planning to have them install soon
According to an official release by PDRM, this prominently includes:

    Illegal window tinting that’s beyond the legal limits of allowing 70% of light through the front windshield and 50% of light through the side and rear windows and windshield
    Licence plates that aren’t in accordance with allowed specifications for size and position
    Unauthorised use of strobe, or flashing lights on vehicles

After June 15, anyone still using any of the above can and will be subject legally to a RM300 fine at least and  on the spot by the police. Higher darkness level by % will increased from 300 - 600
*
Hi, Raytech film will not have rainbow effect on the film.
Raytech Tinting offer Polis and JPJ guarantee on all Raytech genuine product.

dtna7
post May 21 2014, 09:07 AM

Casual
***
Junior Member
456 posts

Joined: Sep 2009
QUOTE(Lord Gitsy @ May 20 2014, 11:49 PM)
Raytech Centurion 4mil  VLT 58%, VLR 15%, IRR95% and TSER 62%. Check this out.
http://www.raytech.com.my/security-solar-window-film/
*
The website takes forever to open. blush.gif

P.S: I can see its the same Centurion model. So previously it was 53%, but now 58%? blink.gif
This is a security film anyway, good for side windows only. To the guy who asked about this tint, better check what are they providing for FWS and RWS.

This post has been edited by dtna7: May 21 2014, 09:59 AM
Alzaowner
post May 22 2014, 12:58 PM

New Member
*
Junior Member
7 posts

Joined: Aug 2010


Done my Honda Jazz two weeks ago with Raytech cs85 and Ultra70 for the front windscreen. Feel a big difference between the previous Llumar tint that I've been using for the past few months which was offered to me from my SA at the time of the purchase of the car. TQ lordgitsy for the good offer and frenly servis.
MGM
post May 22 2014, 06:05 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
Heard there is a updated guideline on tinting. Anyone got any link?
khalis007
post May 23 2014, 01:59 PM

New Member
*
Newbie
1 posts

Joined: May 2014
hi all, wanna know if this is normal. my rear mirror got all these big bubbles after 2 years with Llumar tinted. I was told it is a good brand and expensive. I went back for warranty and the guy in the shop told me my heater behind might peel off and damage. What can I do now? So disappointed cry.gif

Attached Image
dtna7
post May 23 2014, 02:19 PM

Casual
***
Junior Member
456 posts

Joined: Sep 2009
The Raytech specification just suddenly had a huge jump in TSER% readings and VLT increases as well. All remain the same model/series.

I wonder if anyone regulates these readings. How could the same tint just suddenly becomes clearer + rejects more heat suddenly.
lonely143
post May 23 2014, 09:14 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(khalis007 @ May 23 2014, 01:59 PM)
hi all, wanna know if this is normal. my rear mirror got all these big bubbles after 2 years with Llumar tinted. I was told it is a good brand and expensive. I went back for warranty and the guy in the shop told me my heater behind might peel off and damage. What can I do now? So disappointed  cry.gif

Attached Image
*
Did you buy insurance for your windscreen?
If yes,

1. Check your insurance policy, if your insurance cover is more than the cost of the rear windscreen
go claim your windscreen insurance in case the heater is damage.
MGM
post May 23 2014, 10:33 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(khalis007 @ May 23 2014, 01:59 PM)
hi all, wanna know if this is normal. my rear mirror got all these big bubbles after 2 years with Llumar tinted. I was told it is a good brand and expensive. I went back for warranty and the guy in the shop told me my heater behind might peel off and damage. What can I do now? So disappointed  cry.gif

Attached Image
*
b4 tinting, they will say no problem with demister(heater) when changing new tint, but when claim warranty they come with this excuse.
cannavaro
post May 23 2014, 10:34 PM

CATTENACIO
*******
Senior Member
3,008 posts

Joined: Sep 2005
From: T.T.D.I, Bukit Damansara


QUOTE(dtna7 @ May 23 2014, 02:19 PM)
The Raytech specification just suddenly had a huge jump in TSER% readings and VLT increases as well. All remain the same model/series.

I wonder if anyone regulates these readings. How could the same tint just suddenly becomes clearer + rejects more heat suddenly.
*
I am curious as well.
MGM
post May 23 2014, 10:36 PM

10k Club
********
All Stars
18,397 posts

Joined: Oct 2010
QUOTE(MGM @ May 22 2014, 06:05 PM)
Heard there is a updated guideline on tinting. Anyone got any link?
*
Was about to do tinting and now this:
http://www.thestar.com.my/News/Nation/2014...rkshop-in-June/

Should wait for the new guideline?
Lord Gitsy
post May 24 2014, 12:11 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


Please visit Raytech website for more accurate reading and welcome Raytech showroom for checking VLT with their VLT meter.
http://www.raytech.com.my/raytech-product/
alexei
post May 28 2014, 06:58 PM

Biker Mice from Mars
******
Senior Member
1,879 posts

Joined: Jan 2003
From: Medan, ID
This seems to be the international guideline for vehicle glass: http://www.unece.org/fileadmin/DAM/trans/m...egs/R043r3e.pdf

This post has been edited by alexei: May 29 2014, 02:04 AM
simonyw_87
post May 31 2014, 05:10 PM

Getting Started
**
Junior Member
54 posts

Joined: Oct 2006


wow, very good info gathered here.

but the more i read , the harder for me to choose , because dint know how much are those price.
lonely143
post Jun 1 2014, 01:18 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(simonyw_87 @ May 31 2014, 05:10 PM)
wow, very good info gathered here.

but the more i read , the harder for me to choose , because dint know how much are those price.
*
Set your budget 1st. If you are willing to pay more, go for the quality ~
purplecarrotjuice
post Jun 1 2014, 09:33 AM

New Member
*
Junior Member
25 posts

Joined: May 2011
hi all.

i am planning to get he V-kool highest grade for my new car.
couldn't stand the utter heat from my previous experiences.

my question is;
this time i kinda had the installed a gps in the car from the car manufacturer itself.
would it be affected also since it not a gps from smartphones?

i am also worried if the smart tag that i am using now will be affected.

is there anyone here that is using the v-kool highest grade tinting and experiencing such problems?
please share if possible.

thanks.

simonyw_87
post Jun 1 2014, 11:29 AM

Getting Started
**
Junior Member
54 posts

Joined: Oct 2006


QUOTE(lonely143 @ Jun 1 2014, 01:18 AM)
Set your budget 1st. If you are willing to pay more, go for the quality ~
*
If budget 1.5 Max.

what are my options?


OC4/3
post Jun 1 2014, 08:50 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule


QUOTE(simonyw_87 @ Jun 1 2014, 11:29 AM)
If budget 1.5 Max.

what are my options?
*
What car are you driving??
Can get 3M Crystaline from 3M Ampang liao(almost there)
koslo1199
post Jun 1 2014, 11:33 PM

New Member
*
Newbie
0 posts

Joined: Jun 2014
Hi guys. Which car window film brand is best on solar+security+safety? LLUMAR? HO? 3M? RAYTECH? RHINEPRO? Budget around rm2k-rm3k. Advice pls. Thanks alot guys.

This post has been edited by koslo1199: Jun 1 2014, 11:34 PM
OC4/3
post Jun 2 2014, 12:56 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule


QUOTE(koslo1199 @ Jun 1 2014, 11:33 PM)
Hi guys. Which car window film brand is best on solar+security+safety? LLUMAR? HO? 3M? RAYTECH? RHINEPRO? Budget around rm2k-rm3k. Advice pls. Thanks alot guys.
*
3M Nano film thumbup.gif
Below your budget & very good heat reject capability when paired with 3M crsytaline front & back for windscreen
TANNY
post Jun 2 2014, 01:46 PM

New Member
*
Junior Member
31 posts

Joined: Apr 2011
Anyone come to know INFRA RED FILM? Cost me RM 1200 for myvi . Within RM 1500, any film can be introduce? And any Raytech tinted shop in Penang ?
SUSMatrix
post Jun 2 2014, 02:55 PM

King of Char Siew!
********
Senior Member
15,022 posts

Joined: Jan 2003
From: Damansara Jaya/Bandar Utama


QUOTE(Lord Gitsy @ May 20 2014, 12:02 AM)
Raytech Ultra 70 is for front windscreen and Centurion Series is safety film can be install for other windows.
*
Gonna get a new City soon. I want Security tint and IR.

Please PM me price and product detail.

TQ.
koslo1199
post Jun 2 2014, 03:14 PM

New Member
*
Newbie
0 posts

Joined: Jun 2014
QUOTE(OC4/3 @ Jun 2 2014, 12:56 PM)
3M Nano film  thumbup.gif
Below your budget & very good heat reject capability when paired with 3M crsytaline front & back for windscreen
*
Do you know the price for 3M nano security film for golf mk7? Thanks
OC4/3
post Jun 2 2014, 04:41 PM

.
Group Icon
Elite
4,746 posts

Joined: Dec 2007
From: Speed rule


QUOTE(koslo1199 @ Jun 2 2014, 03:14 PM)
Do you know the price for 3M nano security film for golf mk7? Thanks
*
Ask Amelia-0124847844
3M Ampang
The price they give is thumbup.gif
simonyw_87
post Jun 2 2014, 06:48 PM

Getting Started
**
Junior Member
54 posts

Joined: Oct 2006


Lets see what changes after this workshop on tint glass

http://paultan.org/2014/06/02/ops-cermin-gelap-jpj/
DArkBat
post Jun 2 2014, 07:12 PM

Getting Started
**
Junior Member
220 posts

Joined: Jan 2003
From: inside the matrix


Hi Guys,

Recently me and my friend bought a new car, the car salesman offer us llumar tint. After checking around, we find that its a good bargain for the price he offer us.
My friend car get the tint first as he get the car a few day earlier then me. Its quite impressive and the cooling is not that bad. The color of the tint is quite OK ( a little dark...but can still see the driver face).
When my turn to get the car, i found that the back windows is quite clear. I suspect that the back windows is not tinted. I try to run my had over the edge of the screen, but i just can't find the tint line. The line that is there , i think its the default windows heat element line as its very straight. If there is a tint, i think i sure find a uneven line, correct ?
If there anyway to check whether its tinted or not ?
SUSMatrix
post Jun 2 2014, 07:59 PM

King of Char Siew!
********
Senior Member
15,022 posts

Joined: Jan 2003
From: Damansara Jaya/Bandar Utama


QUOTE(DArkBat @ Jun 2 2014, 07:12 PM)
Hi Guys,

Recently me and my friend bought a new car, the car salesman offer us llumar tint. After checking around, we find that its a good bargain for the price he offer us.
My friend car get the tint first as he get the car a few day earlier then me. Its quite impressive and the cooling is not that bad. The color of the tint is quite OK ( a little dark...but can still see the driver face).
When my turn to get the car, i found that the back windows is quite clear. I suspect that the back windows is not tinted. I try to run my had over the edge of the screen, but i just can't find the tint line. The line that is there , i think its the default windows heat element line as its very straight. If there is a tint, i think i sure find a uneven line, correct ?
If there anyway to check whether its tinted or not ?
*
friend..darker tint doesnt mean better or have higher heat resistant. it simply means you will kena jpj saman.

Anyway, just go to a few tint shop and ask them have a look. Sure they check for you.
razorboy
post Jun 3 2014, 09:19 AM

#winning
*******
Senior Member
2,634 posts

Joined: Dec 2008


Hi guys,

I'm still in the midst of going through the thread so I will catch on soon enough. I am getting a new Polo Sedan soon and I was wondering what kind of tint I should get?

The original glass itself is quite dark so I was wondering what kind of safety + heat rejection tint I can get. I am quite keen on the safety aspects because whenever I travel overseas my fiancee will be driving the car. I don't mind losing money but I am very concerned with my fiancee's safety.

For the Heat rejection, I understand even with the best tints around, if my car is parked under the sun for 6 - 8 hours a day, it wouldn't be that much of a difference but it still be somewhat helpful.

So do advise me on what kind of tints I can get. Budget wise, I'm looking at 1-2k ideally, but I am more particular on getting something top notch and if it's worth the money I will increase my budget. There's a price for quality but there isn't a price for my family's lives.

Thanks !
cannavaro
post Jun 4 2014, 12:12 AM

CATTENACIO
*******
Senior Member
3,008 posts

Joined: Sep 2005
From: T.T.D.I, Bukit Damansara


Kadar telus cahaya cermin sisi, belakang kenderaan dikurangkan kepada 25 peratus
With immediate effect!
Xu3r
post Jun 4 2014, 01:28 AM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



should i go buy raytech 70% front tint and 50% side ?
lonely143
post Jun 4 2014, 09:24 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(cannavaro @ Jun 4 2014, 12:12 AM)
Kadar telus cahaya cermin sisi, belakang kenderaan dikurangkan kepada 25 peratus
With immediate effect!
*
Not official, but this is stupid rules ~
TANNY
post Jun 5 2014, 08:38 PM

New Member
*
Junior Member
31 posts

Joined: Apr 2011
Got a quote from one vendor, Llumar AVS RM 1800. Is it good deal? Myvi

This post has been edited by TANNY: Jun 5 2014, 08:39 PM
Xu3r
post Jun 5 2014, 08:39 PM

Getting Started
**
Junior Member
134 posts

Joined: Nov 2011



QUOTE(TANNY @ Jun 5 2014, 08:38 PM)
Got a quote from one vendor, Llumar AVS RM 1800. Is it good deal? Myvi
*
Overpriced

Myvi should be lower price than that because the car count as small car / mini
TANNY
post Jun 5 2014, 09:55 PM

New Member
*
Junior Member
31 posts

Joined: Apr 2011
Vendor said good TSER and IRR with this price range. But I can' t get the newest spec from internet.
Lord Gitsy
post Jun 7 2014, 08:52 AM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


The suggestion for the VLT35% for the 2 rear side window and rear windscreen has not get the approval from Parliament yet. It is just a suggestion from Timbalan Menteri talk during the "Bengkel Discussion. But this make me really confuse, before this Ketua Pengarah JPJ, emphasis want to catch dark tinted due to criminal case may happen inside the car as the police officer can't see into the car tinted with dark film, and the new suggestion is helping on the criminal case again as VLT 35% very hard to see thought also.

According to the AAA Association Malaysia, (this is association for audio, accessories, tinted and air-con) their request during the "bengkel Discussion" is list as below :
VLT for the front > 60%
VLT for the rest of window >40%
I think AAA proposal is more reasonable and good for public.
lonely143
post Jun 8 2014, 01:39 AM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Lord Gitsy @ Jun 7 2014, 08:52 AM)
The suggestion for the VLT35% for the 2 rear side window and rear windscreen has not get the approval from Parliament yet. It is just a suggestion from Timbalan Menteri talk during the "Bengkel Discussion. But this make me really confuse, before this Ketua Pengarah JPJ, emphasis want to catch dark tinted due to criminal case may happen inside the car as the police officer can't see into the car tinted with dark film, and the new suggestion is helping on the criminal case again as VLT 35% very hard to see thought also.

According to the AAA Association Malaysia, (this is association for audio, accessories, tinted and air-con) their request during the "bengkel Discussion" is list as below :
VLT for the front > 60%
VLT for the rest of window >40%
I think AAA proposal is more reasonable and good for public.
*
Although we are competitor, but I do agree with your point of view.
AAA Association Malaysia recommendation is more reasonable because some of
the car windows especially front windscreen already 60%-70% before tinted !

shadowzephyr
post Jun 9 2014, 09:20 AM

Getting Started
**
Junior Member
133 posts

Joined: May 2012
From: Cyberjaya
Guys, here is my recommendation.

I've tinted my new car at Raytech Bangi. Security tinted package CS85 5 mil at the side with VLT 56%, TSER 56% and IRR 85%. For the front they're given me V90 with VLT 70% and IRR 90%. This place provide waiting room with air-cond and they even played movie, so I'm not bored while waiting my car ready.

My opinion for the tinted? I'd say this is quite a premium one with affordable price! Very satisfied! thumbup.gif Great workmanship, good quality of tinted film and I don't feel hot at all although the temp outside is 40c++! No need to enable aircond, just fan is enough even in the hottest day if you want to save your fuel. biggrin.gif

Although I do have 3M voucher, (and I do agree 3M is one of the best car tinted beside Raytech, VKool and some others) I never regret of my decision. In addition, the package I got from Raytech give better VLT and TSER compare with 3M, with cheaper price regardless of using that voucher or not. brows.gif

I definitely recommend Raytech to others, just like few friends that recommend me this brand when I'm getting my car before. Also thanks to Lord Gitsy explanation of car tinted, it was a very good one and easier to understand. smile.gif
samurai_ghost
post Jun 9 2014, 10:13 AM

Getting Started
**
Junior Member
83 posts

Joined: Apr 2010


Installed Classic Series (Icy Blue) for front windsreen + CS60 (4 mil) for side windows & rear windscreen on my 2013 Mirage. Raytech SS2.

Free plat number engrave on windscreen & 7" black tint for upper front windscreen. Good service & workmanship. thumbup.gif

Since this is my 2nd car. Seldom park under hot sun or travel during hot day time. Can still feel a bit heat because this type of tint only filter 60% IRR. As expected. But still better than not applying any tint.

Applied for 2 weeks, can't say much on the durability. However, I'm quite satisfied so far.

Recently I replaced my 2011 Insight front windscreen because of huge stone chip crack. So, I decided to install Raytech Ultra 70 for front windscreen. Same place. Of course good service & workmanship as expected. rclxms.gif

I can immediately feels the different when parked under hot sun during office hour since Ultra 70 reject 97% of IRR. No need to wind down window to cool down the interior. Took around 3 - 5 minutes to feel comfortable using 23 C aircond.

Same as other, initially I also wonder on the reliability or how genuine the tint product on market. After reading few forum thread & internet article, I highly recommend Raytech. Mid range price with good heat rejection option. Of course if want better rejection option, have to pay a bit higher price for high end product (E.g. V97, Ultra 70 + Centurion series). Depend on user needs & budget. biggrin.gif

Tint is from US (CLC, Virginia US). Can search on Google. You'll not conned with fake or low grade tint if installed at their authorized shop (E.g. SS2, Bangi). Peace of mind.

7 years warranty. They'll stick installed tint model sticker on your warranty card. They said they'll pay our "saman" for JPJ compliance tint model. Not sure if this is only one time payment or what.

Please look for Nicole the marketing staff or Jess the SS2 branch manager. They can give 10% discount from retail price. Maybe can nego to ask for more discount or good deal. PM me for Nicole contact.

Disclaimer, I'm not Raytech agent or paid by Raytech. I'm just a satisfied user. smile.gif

This post has been edited by samurai_ghost: Jun 9 2014, 10:15 AM
Reis
post Jun 13 2014, 11:34 AM

Casual
***
Junior Member
344 posts

Joined: Apr 2005


Hi,

Are all the Raytech films JPJ compliant? I'm looking at the Centurion RX4mil, VLT only 58%? Infact, all the films seems non compliant sweat.gif

Anyhow I'm no pro, please correct me accordingly.
Gigabitz
post Jun 13 2014, 11:59 AM

Powered By Motivation
Group Icon
Elite
2,662 posts

Joined: Jan 2003
From: Malaysia


QUOTE(Reis @ Jun 13 2014, 11:34 AM)
Hi,

Are all the Raytech films JPJ compliant? I'm looking at the Centurion RX4mil, VLT only 58%? Infact, all the films seems non compliant  sweat.gif

Anyhow I'm no pro, please correct me accordingly.
*
Most of the tints offered by big brands are not JPJ compliant.. Nowadays our car comes with tinted glass so VLT has been reduced. Unless you tint the clearest tint, or else it is almost impossible to get JPJ compliant though. whistling.gif
shadowzephyr
post Jun 13 2014, 04:39 PM

Getting Started
**
Junior Member
133 posts

Joined: May 2012
From: Cyberjaya
QUOTE(Reis @ Jun 13 2014, 11:34 AM)
Hi,

Are all the Raytech films JPJ compliant? I'm looking at the Centurion RX4mil, VLT only 58%? Infact, all the films seems non compliant  sweat.gif

Anyhow I'm no pro, please correct me accordingly.
*
VLT 'only' 58%? Correct me if I'm wrong, but it seems that you might not understand VLT clearly.

VLT is Visible Light Transmitted, which is the percentage of visible light that passes directly through filmed glass.
The higher the number,the lighter the film.

So based on these numbers, Centurion RX4 film for example is JPJ compliant, because the required VLT is at least 70% for front, and 50% for side and back. This film VLT is 58%, higher than JPJ requirement which is 50%.

Oh, for the front they'll not set up the same film as the side / back.
For example, Centurion RX4 package usually used:
- V90 non-security film for the front with VLT 70%, and
- RX4 security film at the side and back with VLT 58%.

So, both pass JPJ compliant because the VLT is same / higher than required. I assume this is true for other package and other brands. smile.gif Unless you specifically request a specific tinted for the front that less than 70% VLT.

Calling Lord Gitsy for further confirmation. biggrin.gif

QUOTE(Gigabitz @ Jun 13 2014, 11:59 AM)
Most of the tints offered by big brands are not JPJ compliant.. Nowadays our car comes with tinted glass so VLT has been reduced. Unless you tint the clearest tint, or else it is almost impossible to get JPJ compliant though.  whistling.gif
*
Yeah, this is the real issue. Well cannot blame them though, those film are built assuming every car glass is 100% light transmitted. So, those film are already JPJ compliant, but when combining with our car glass, it become the opposite, not compliant anymore. Haha biggrin.gif

That's why usually some tinted film adviser said they can handle if we got JPJ letter, because they can settle it (by proving to JPJ that their film is already JPJ compliant). But if need to check by Puspakom, they might cannot help settle. Puspakom don't care your film JPJ compliant or not. laugh.gif

This post has been edited by shadowzephyr: Jun 13 2014, 04:46 PM
lonely143
post Jun 13 2014, 05:07 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(Gigabitz @ Jun 13 2014, 11:59 AM)
Most of the tints offered by big brands are not JPJ compliant.. Nowadays our car comes with tinted glass so VLT has been reduced. Unless you tint the clearest tint, or else it is almost impossible to get JPJ compliant though.  whistling.gif
*
To be exact correct.

Most of the big brands are offering tint that "compliant with JPJ" but "JPJ never approved any tint brand"

Compliant means that "we" are willing to absorb the cost of "removing, summon and re-tint for the car owner.

This post has been edited by lonely143: Jun 13 2014, 05:07 PM
a13solut3
post Jun 13 2014, 08:05 PM

Whiner FTW!
******
Senior Member
1,757 posts

Joined: Mar 2007
From: _|_

Guy, is this worth it?

groupon.my/deals/johor/m-six-tint-shop/718413795

The price seems nice, but the side glasses are from Solar Gard. Since I have 0 knowledge on the pricing, please advise.
billietee
post Jun 15 2014, 03:28 PM

New Member
*
Junior Member
4 posts

Joined: May 2014


QUOTE(shadowzephyr @ Jun 9 2014, 09:20 AM)
Guys, here is my recommendation.

I've tinted my new car at Raytech Bangi. Security tinted package CS85 5 mil at the side with VLT 56%, TSER 56% and IRR 85%. For the front they're given me V90 with VLT 70% and IRR 90%. This place provide waiting room with air-cond and they even played movie, so I'm not bored while waiting my car ready.

My opinion for the tinted? I'd say this is quite a premium one with affordable price! Very satisfied!  thumbup.gif Great workmanship, good quality of tinted film and I don't feel hot at all although the temp outside is 40c++! No need to enable aircond, just fan is enough even in the hottest day if you want to save your fuel.  biggrin.gif

Although I do have 3M voucher, (and I do agree 3M is one of the best car tinted beside Raytech, VKool and some others) I never regret of my decision. In addition, the package I got from Raytech give better VLT and TSER compare with 3M, with cheaper price regardless of using that voucher or not. brows.gif

I definitely recommend Raytech to others, just like few friends that recommend me this brand when I'm getting my car before. Also thanks to Lord Gitsy explanation of car tinted, it was a very good one and easier to understand.  smile.gif
*
can i have the number?im keen
billietee
post Jun 15 2014, 03:28 PM

New Member
*
Junior Member
4 posts

Joined: May 2014


Pm me the number,im keen,thanks
mgb
post Jun 15 2014, 05:17 PM

Casual
***
Junior Member
385 posts

Joined: Jan 2003
From: Wellington, NZ


Just got a new swift and dealer gave me a discoun voucher for Tint Master.
Any advice on this tint brand? Or should I burn this voucher and go for a better brand but I don't really have a high budget sad.gif
lonely143
post Jun 15 2014, 10:25 PM

Getting Started
**
Junior Member
168 posts

Joined: Jul 2008


QUOTE(mgb @ Jun 15 2014, 05:17 PM)
Just got a new swift and dealer gave me a discoun voucher for Tint Master.
Any advice on this tint brand? Or should I burn this voucher and go for a better brand but I don't really have a high budget sad.gif
*
If you have limited budget below RM1000, go for it
If you are willing to fork out RM1500 for better tint then just dispose it.
The voucher is actually marketing gimmick
yhanlee
post Jun 15 2014, 11:32 PM

Getting Started
**
Junior Member
73 posts

Joined: Jul 2007


Any raytech dealer here? Looking for raytech tint with good price
Axell
post Jun 16 2014, 01:32 PM

Looking for FL
*****
Senior Member
920 posts

Joined: Jun 2007
From: Somewhere in Malaysia


QUOTE(yhanlee @ Jun 15 2014, 11:32 PM)
Any raytech dealer here? Looking for raytech tint with good price
*
You can contact DaBestOne or Lord Gitsy, btw I done my tint with DaBestOne thumbup.gif
Lord Gitsy
post Jun 16 2014, 11:46 PM

New Member
*
Junior Member
6 posts

Joined: Aug 2013


QUOTE(shadowzephyr @ Jun 13 2014, 04:39 PM)
VLT 'only' 58%? Correct me if I'm wrong, but it seems that you might not understand VLT clearly.

VLT is Visible Light Transmitted, which is the percentage of visible light that passes directly through filmed glass. 
The higher the number,the lighter the film.

So based on these numbers, Centurion RX4 film for example is JPJ compliant, because the required VLT is at least 70% for front, and 50% for side and back. This film VLT is 58%, higher than JPJ requirement which is 50%.

Oh, for the front they'll not set up the same film as the side / back.
For example, Centurion RX4 package usually used:
- V90 non-security film for the front with VLT 70%, and
- RX4 security film at the side and back with VLT 58%.

So, both pass JPJ compliant because the VLT is same / higher than required. I assume this is true for other package and other brands.  smile.gif Unless you specifically request a specific tinted for the front that less than 70% VLT.

Calling Lord Gitsy for further confirmation.  biggrin.gif
Yeah, this is the real issue. Well cannot blame them though, those film are built assuming every car glass is 100% light transmitted. So, those film are already JPJ compliant, but when combining with our car glass, it become the opposite, not compliant anymore. Haha  biggrin.gif

That's why usually some tinted film adviser said they can handle if we got JPJ letter, because they can settle it (by proving to JPJ that their film is already JPJ compliant). But if need to check by Puspakom, they might cannot help settle. Puspakom don't care your film JPJ compliant or not.  laugh.gif
*
Hi guys, sorry i am busy these days, sorry for late reply.
I think everybody know the front windscreen the VLT must above 70% and VLT for the side and the back should above 50% in order to compliant with JPJ rules. Centurion 4mil VLT58% is only apply for the side, should have not problem at all. In Centurion 4mil package, the front will be Raytech Ultra 70. Indeed, most of the glass is not 100% clear, so we need higher VLT film to apply on the glass to make sure it is still compliant with JPJ.

Message from Raytech Malaysia, we will still continuously offering JPJ and Polis guarantee to all customer no matter what happened.
sj0217
post Jun 17 2014, 08:27 AM

Look at all my stars!!
*******
Senior Member
6,483 posts

Joined: Apr 2012
QUOTE(Lord Gitsy @ Jun 16 2014, 11:46 PM)
Hi guys, sorry i am busy these days, sorry for late reply.
I think everybody know the front windscreen the VLT must above 70% and VLT for the side and the back should above 50% in order to compliant with JPJ rules. Centurion 4mil VLT58% is only apply for the side, should have not problem at all. In Centurion 4mil package, the front will be Raytech Ultra 70. Indeed, most of the glass is not 100% clear, so we need higher VLT film to apply on the glass to make sure it is still compliant with JPJ.

Message from Raytech Malaysia, we will still continuously offering JPJ and Polis guarantee to all customer no matter what happened.[cool.gif
*
Good to hear from you about Message from Raytech (M) thumbup.gif
razorboy
post Jun 17 2014, 01:49 PM

#winning
*******
Senior Member
2,634 posts

Joined: Dec 2008


QUOTE(Lord Gitsy @ Jun 16 2014, 11:46 PM)
Hi guys, sorry i am busy these days, sorry for late reply.
I think everybody know the front windscreen the VLT must above 70% and VLT for the side and the back should above 50% in order to compliant with JPJ rules. Centurion 4mil VLT58% is only apply for the side, should have not problem at all. In Centurion 4mil package, the front will be Raytech Ultra 70. Indeed, most of the glass is not 100% clear, so we need higher VLT film to apply on the glass to make sure it is still compliant with JPJ.

Message from Raytech Malaysia, we will still continuously offering JPJ and Polis guarantee to all customer no matter what happened.
*
Hi Lord Gitsy, did you missed my PM? I never heard back from you about my inquiry.
shadowzephyr
post Jun 18 2014, 02:36 PM

Getting Started
**
Junior Member
133 posts

Joined: May 2012
From: Cyberjaya
QUOTE(billietee @ Jun 15 2014, 03:28 PM)
can i have the number?im keen
*
Done. And you can ask Lord Gitsy also for recommendation and appointment. biggrin.gif

QUOTE(lonely143 @ Jun 15 2014, 10:25 PM)
If you have limited budget below RM1000, go for it
If you are willing to fork out RM1500 for better tint then just dispose it.
The voucher is actually marketing gimmick
*
Cannot agree more. nod.gif

QUOTE(Lord Gitsy @ Jun 16 2014, 11:46 PM)
Hi guys, sorry i am busy these days, sorry for late reply.
I think everybody know the front windscreen the VLT must above 70% and VLT for the side and the back should above 50% in order to compliant with JPJ rules. Centurion 4mil VLT58% is only apply for the side, should have not problem at all. In Centurion 4mil package, the front will be Raytech Ultra 70. Indeed, most of the glass is not 100% clear, so we need higher VLT film to apply on the glass to make sure it is still compliant with JPJ.

Message from Raytech Malaysia, we will still continuously offering JPJ and Polis guarantee to all customer no matter what happened.
*
This is the kind of assurance that we want. Good job Raytech thumbup.gif
Janus87
post Jun 18 2014, 05:10 PM

New Member
*
Junior Member
20 posts

Joined: Jan 2013
QUOTE(OC4/3 @ Mar 25 2014, 11:05 PM)
UGPM
*
How much? Let me know bro~
yanjinowa
post Jun 18 2014, 06:32 PM

On my way
****
Senior Member
565 posts

Joined: Jan 2003
From: KL,IPOH.
Hi, anyone with experience of vessolar?
Else i will pick raytech or huper optik...
Gigabitz
post Jun 19 2014, 01:08 AM

Powered By Motivation
Group Icon
Elite
2,662 posts

Joined: Jan 2003
From: Malaysia


I just applied Raytech Ultra70 (Front) + V97 (Rear) + CS85 (Side). I've another car apply 3M Crystalline Series.

So I can compare side by side.

Many people said that 3M Crystalline Series is the best film in the market for maximum heat rejection. I agreed on that UNTIL I decided to try Raytech on another car.

Wow! Impressive outcome. Although I installed CS85 (IRR 85%) but it just as great as Crystalline Series (IRR 99%). Probably due to Raytech film is darker compare to 3M. So I don't really feel the heat. I don't feel the "burning pain" with Raytech. With 3M, I still can feel the "pain" - although 99% IRR as stated.

Talks about leaving the car for 3 hours under hot sun. Emm.. draw! Both has great heat rejection when the car parking under hot sun. I can jump into the car after 2-3 minutes. The leather seats for both cars were slightly hot but bearable.

Sexy. Raytech win! This is personal preference. As mentioned above, 3M film is so clear - just like you never done tinting before. Raytech is darker and highly reflective. So cool when you see from a distance smile.gif

Price/Value: Raytech win again! Maybe I get a good deal from @Lord Gitsy - but truly value for money. Top notch product and customer service!

3M or Raytech? It's up to your personal preference. Both has comparable heat rejection performance. 3M tint is clearer while Raytech is darker. If I given another chance, I will still go for Raytech biggrin.gif

This post has been edited by Gigabitz: Jun 19 2014, 01:10 AM
bombercycle
post Jun 19 2014, 10:47 AM

New Member
*
Junior Member
41 posts

Joined: Jul 2009
QUOTE(Gigabitz @ Jun 19 2014, 01:08 AM)
I just applied Raytech Ultra70 (Front) + V97 (Rear) + CS85 (Side). I've another car apply 3M Crystalline Series.

So I can compare side by side.

Many people said that 3M Crystalline Series is the best film in the market for maximum heat rejection. I agreed on that UNTIL I decided to try Raytech on another car.

Wow! Impressive outcome. Although I installed CS85 (IRR 85%) but it just as great as Crystalline Series (IRR 99%). Probably due to Raytech film is darker compare to 3M. So I don't really feel the heat. I don't feel the "burning pain" with Raytech. With 3M, I still can feel the "pain" - although 99% IRR as stated. 

Talks about leaving the car for 3 hours under hot sun. Emm.. draw! Both has great heat rejection when the car parking under hot sun. I can jump into the car after 2-3 minutes. The leather seats for both cars were slightly hot but bearable.

Sexy. Raytech win! This is personal preference. As mentioned above, 3M film is so clear - just like you never done tinting before. Raytech is darker and highly reflective. So cool when you see from a distance smile.gif

Price/Value: Raytech win again! Maybe I get a good deal from @Lord Gitsy - but truly value for money. Top notch product and customer service!

3M or Raytech? It's up to your personal preference. Both has comparable heat rejection performance. 3M tint is clearer while Raytech is darker. If I given another chance, I will still go for Raytech biggrin.gif
*
good comparison ,thanks for your info


bombercycle
post Jun 19 2014, 10:48 AM

New Member
*
Junior Member
41 posts

Joined: Jul 2009
any update for JPJ approval ?


going to tint my car on CS 85 , Raytech
any suggestion front and rear screen
fschen_82
post Jun 19 2014, 11:52 AM

New Member
*
Newbie
0 posts

Joined: Jun 2014


QUOTE(bombercycle @ Jun 19 2014, 10:47 AM)
good comparison ,thanks for your info
*
Can PM me the price and the Raytech SA that you got for the package you installed? TQ in advance
bananadriver
post Jun 19 2014, 11:54 AM

New Member
*
Newbie
0 posts

Joined: Oct 2013
guys, slightly off topic, but how long needed for car tint to fully settle, usually?

yanjinowa
post Jun 19 2014, 01:50 PM

On my way
****
Senior Member
565 posts

Joined: Jan 2003
From: KL,IPOH.
QUOTE(Gigabitz @ Jun 19 2014, 01:08 AM)
I just applied Raytech Ultra70 (Front) + V97 (Rear) + CS85 (Side). I've another car apply 3M Crystalline Series.

So I can compare side by side.

Many people said that 3M Crystalline Series is the best film in the market for maximum heat rejection. I agreed on that UNTIL I decided to try Raytech on another car.

Wow! Impressive outcome. Although I installed CS85 (IRR 85%) but it just as great as Crystalline Series (IRR 99%). Probably due to Raytech film is darker compare to 3M. So I don't really feel the heat. I don't feel the "burning pain" with Raytech. With 3M, I still can feel the "pain" - although 99% IRR as stated. 

Talks about leaving the car for 3 hours under hot sun. Emm.. draw! Both has great heat rejection when the car parking under hot sun. I can jump into the car after 2-3 minutes. The leather seats for both cars were slightly hot but bearable.

Sexy. Raytech win! This is personal preference. As mentioned above, 3M film is so clear - just like you never done tinting before. Raytech is darker and highly reflective. So cool when you see from a distance smile.gif

Price/Value: Raytech win again! Maybe I get a good deal from @Lord Gitsy - but truly value for money. Top notch product and customer service!

3M or Raytech? It's up to your personal preference. Both has comparable heat rejection performance. 3M tint is clearer while Raytech is darker. If I given another chance, I will still go for Raytech biggrin.gif
*
Good price? can intro?
yanjinowa
post Jun 19 2014, 01:50 PM

On my way
****
Senior Member
565 posts

Joined: Jan 2003
From: KL,IPOH.
Double post... sweat.gif

This post has been edited by yanjinowa: Jun 19 2014, 01:50 PM
darkcurves
post Jun 19 2014, 03:25 PM

Enthusiast
*****
Senior Member
779 posts

Joined: Oct 2004
From: OUG


Guys, wanna ask something. I remember i saw a video where this guy was really high in his Myvi and the Bomba try to break open the glass but no matter how hard he tries, he cant break it, not even a scratch. Is that also some kinda security tint or have to replace the entire glass window? Too much crime this days, sigh...
Gigabitz
post Jun 19 2014, 05:42 PM

Powered By Motivation
Group Icon
Elite
2,662 posts

Joined: Jan 2003
From: Malaysia


QUOTE(yanjinowa @ Jun 19 2014, 01:50 PM)
Good price? can intro?
*
Just PM Raytech representative for best quote smile.gif

@Lord Gitsy rclxms.gif rclxms.gif

20 Pages  1 2 3 > » Top
 

Change to:
| Lo-Fi Version
0.2600sec    0.46    6 queries    GZIP Disabled
Time is now: 27th November 2025 - 11:38 PM