Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Car Tint Advice - V2, Raytech, Vkool, Huper Optic, 3M or .....

views
     
heshin
post May 10 2014, 03:34 PM

Getting Started
**
Junior Member
53 posts

Joined: Dec 2009


hi guys, i am surveying as well. was looking for vkool but a bit out of budget. reading through all the posts, it seem like a lot of people recommending Huper optic FWS SECH 60 and other windows either normal C50 / C50 Shield 4 Mil.

1. I cant find SECH 60 in the official website http://www.huperoptik.com/en/smart/index.aspx

2. C50 can be found in link above. It is different with C50 Shield 4 Mil right?

3. From link above still, I believe C50 Shield 4 Mil = Hüper Ceramic 50 Shield - 4 Mil (code C50S-4). am i right?

Anyone can shed some light on above? thanks in advance.
heshin
post May 10 2014, 06:33 PM

Getting Started
**
Junior Member
53 posts

Joined: Dec 2009


After reading whole day. I would like to share my thought with those who are inexperience as me, and looking for good tint + security + JPJ less kacau + reasonable. Don't shoot me too harsh. just my thought ok.

1. Don't go for ayam brand. You will regret.
2. Most recommended: Huper Optik (HO), VKOOL & 3m
3. Security film, for eg: 4 mil, just merely thicker. In general: It takes ~ 8 seconds to break your window with 4 mil tint, while normal tint takes ~ 4. seconds.(subject to skill and tool)
5. Some security film might not have good TSER compare to normal film. So you have to judge you want better heat rejection or want a few more seconds before someone break your car windows.
6. My own experience: Regardless of seller and brand, your friends will get quoted price cheaper than you for rm300~500 for the same spec, or vice versa. That's kinda sad. That's why you only allow to PM for price (so called professional). No choice la. cari makan. i understand. but still a bit sad, cause different too much d. rm100-200 still can accept. but 200~500 is too much. Nobody like to be water fish. So for new guys, always ask your friends for price comparison!
7. Afterall, the most recommended tint spec I found is:
a. HO- FWS & RWS SECH60, All other sides C50S-4mil (security)
b. HO- FWS SECH60, All other sides C40
c. HO - whole car SECH 60.
d. VKOOL - FWS & RWS VKOOL elite, all other sides VKOOL SAFETY 4mil (security)
e. VKOOL - whole car vkool elite.

Brand/Model VKOOLElite SECH60 C70 VKOOLSAFETY4 C50 C40 C50S-4
Visible Light Transmittance 73% 59% 71% 72% 52% 42% 52%
Visible Light Reflectance 8% 8% 10% NA 12% 9% 14%
Ultra-Violet Radiation Rejection 99% 99% 99% 99% 99% 99% 99%
Shading Coefficient 0.50 0.54 0.62 0.61 0.58 0.53 59%
Infra-Red Heat Rejection 94% 83% 91% NA 69% 80% 67%
Total Solar Transmission NA 46% 38% NA 38% 29% 39%
TSER 55% 54% 47% 50% 50% 55% 49%

8. I research the spec above from official website. new inexperience should do so for your prefer tint.

9. Beware of double layer tint, or tint over 6 mil tick, it will spoil your power window. (too heavy i guess?)

10. In the end, balance between the price and the spec is what will you should consider to make your decision.

This post has been edited by heshin: May 10 2014, 07:10 PM

 

Change to:
| Lo-Fi Version
0.1685sec    0.52    7 queries    GZIP Disabled
Time is now: 28th November 2025 - 11:49 PM