***SOME SOLUTION MIGHT NOT WORK FOR OTHERS***
PLEASE READ THE CAR'S MANUAL***SPECIAL COPY & PASTE FROM PICM*** thx to PICM admis
» Click to show Spoiler - click again to hide... «
Q&A SESSION FOR THE IRIZ'S OWNER AND NON OWNER
By Rabiatul'Adawiyah Hamid on Friday, January 9, 2015 at 10:59pm
ANDA TANYA ADMIN, SA, MEKANIK & MEMBER JAWAB
Q = 3 year free servis....ape maksudnya
A = Jika anda diberi voucher servis percuma 3 tahun itu, harganya rm 95(minyak EO mineral, OF, dan drain plug & labour) dan xperlu bayar papekalau servis guna minyak mineral. Kalau anda ingin servis dengan minyak semisyn kena topup rm38.50...kalau fully rm100++... Anda akan dapat 7 kepingvoucher untuk 7 kali servis pada mileage 1k, 10k, 20k, 30k, 40k, 50k &60k km...
Q = Mcm mana nak save radio station?
A = Bile dah pilih frequency. ...tekan lama kat salah satu dri 6 slotchannel tu
Q = Radio ada berape tuner?
A = Ada 4 mode AM, FM1, FM2, FMT...so bg kite radio boleh save 18channel , 6 channel bg setiap mode...AM dah xguna
Q = Bacaan suhu kt meter brp bar?
A = Normal 3 bar
Q = Macam mana nak hidupkan Navigation...sebab bile saya tekan tidakkeluar maps
A = 1st, pastikan micro SD maps sudah dimasukkan dalam slot SD card....(SA yang akan buat sebelum serah kereta)... Jika hendak masukkan micro SD tu,pastikan kunci dicabut (OFF) / bagi keyless, jangan tekan start button dulu....Bile sudah masuk...hidupkan enjin seperti biasa
Q = Rim Iriz saiz, pcd?
A = 1.3 / rim 14" x5.5 jj, tayar silverstone Synergy M3 175/65/14,
1.6 / rim 15" x6.5jj, tayar silverstone Synergy M5 195/55/15,
PCD 114
Q = RPM = speed
A = 1.3 MT (3100rpm = 110kmj),.... 1.6 CVT (2600rpm = 110kmj)
Q = Keluar "PERIODIC INSPECTION" di screen info meter
A = perkataan itu akan keluar 500km sebelum schedule inspection/service yangdijadualkan...Service Center akan reset balik selepas servis Iriz anda(pastikan sebelum meninggalkan SC mekanik dah resetkan nya)
Q = Push Start Button (keyless model)...Cara start enjin yang betul
A=
https://www.facebook.com/video.php?v=890626...99097258&type=3 Q = Top Speed Iriz
A = kalau 1.6 cvt dah ade yg post kat youtube 180kmj,....Apek pernah lenjansampai 220kmj kat litar testing Proton....yg video ada dibawah takat 160kmj je
Part 1
https://www.facebook.com/video.php?v=890620...99097258&type=3 Part 2
https://www.facebook.com/video.php?v=890620...99097258&type=3 Q = Fuel Comsumption Iriz
A = Iriz saya 1.6 CVT.......Setakat ni kalau drive bandar + jem ave9-10L/100km....masa highway balik kampung speed 110kmj dapat 6-7L/100km
1) Power Window
» Click to show Spoiler - click again to hide... «
QUOTE(Enigmatic @ Feb 5 2015, 12:46 PM)
From the previous thread:
For the auto power window - I can trigger the power window to wind down automatically, but could I do similarly for winding up the window?
Thanks.

QUOTE(annas473 @ Feb 5 2015, 01:28 PM)
for Premium version, the power window can wind down and up automatically. (confirm with Iriz Community Malaysia)
for Exec, wind up manually.
for Standard,
unsure. same as Exec. (thanks to
waiora_protuner post #1608)
2. CVT gear lag (credit to
mat79)
» Click to show Spoiler - click again to hide... «
Q. You have mentioned that the clutch is almost completely open while standing still with D engaged, is this the prime reason of slight lagging when slowly pressing the gas to move?
A. Yes, if you release the brake and im
mediately press the gas, this is the case. It is always better not to press the gas immediately unless you have to (uphill), you will notive less delay. That it isn't superagressive at launch (if you would mean this by lag) is calibration, it isto preserve both engine and CVT. it is called torque reduction, the engines power delivery is minimized, although full trottle.
as punch representative reply,in simple term,when u r already in D,let the car crawl 1st on its own before apply throttle,unless the situation demand it.
if u are at neutral, engage to D a bit earlier, maybe half a second than normal at/torque converter cvt to let the clutch builds its pressure.
but dont expect the rpm will raise hand in hand with speed during stop n go situation cuz its clutch type cvt,n it does behave like manual trans.
low speed jerking will.be lesser overtime,but it wont completely gone.
3. Windscreen water dispenser
» Click to show Spoiler - click again to hide... «
QUOTE(stevennelson @ Feb 7 2015, 08:54 PM)
Anyone facing problem with windscreen water disperser?
Mine right handside is no water coming out…

Just get my car 3days ago je
QUOTE(AbgRZ @ Feb 7 2015, 09:00 PM)
check your water tube under the hood... tercabut kot
4. CVT droning
» Click to show Spoiler - click again to hide... «
QUOTE(IvanWong1989 @ Feb 7 2015, 10:01 PM)
Hmm. First day of usage. Find it quite noisy inside. Don't know is it engine or cvt droning sound.
U guys same too?
QUOTE(yadea @ Feb 7 2015, 11:00 PM)
Most people will say CVT droning. Engine should be quiet unless u drive at high rpm.
QUOTE(AbgRZ @ Feb 8 2015, 12:08 PM)
its engine sound..... typical proton engine sound more "kasar"...... but the power delivery smoother than exora bold (own one), expecially at low speed.... no more jerking, whoever drive exora bold knows what i mean.
CVT droning for me quite minimal.... x perasan pun, unless you floor the pedal like racing car. The way to drive CVT is to tekan your pedal until certain rpm, then just wait the car to gain speed gradually. do not force the CVT GB like conventional GB, it just make your FC even worse.
5. X1R - thanks to
N33d» Click to show Spoiler - click again to hide... «
QUOTE(N33d @ Feb 9 2015, 02:09 PM)
please please please dont use that. u will hurt ur engine badly
personally i don think any EO addictive is necessary, use a good EO is more reliable then using additional additive here n thr.
http://funtasticko.net/info-memo-arahan-un...ntuk-enjin-cfe/6. Radio Volume
» Click to show Spoiler - click again to hide... «
7. Updating ECU & TCU
» Click to show Spoiler - click again to hide... «
8. Washer Problem - thanks to
IvanWong1989» Click to show Spoiler - click again to hide... «
QUOTE(IvanWong1989 @ Feb 16 2015, 08:12 PM)
Agree. Pin it. Washer problem can happen on front and back hose. Immediate solution is to cable tie it. Front part need disassemble the whole plastic plate . Back part only break light
Also.
How to test? Unfortunately . Use it as normal ba. If it wants to tanggal. It will tanggal
9. Compilation of all problem thanks to
jaychew90 & others
» Click to show Spoiler - click again to hide... «
QUOTE(jaychew90 @ Mar 10 2015, 11:06 AM)
First of all, credits to @Damon6 for compiling this list
I'll cleanup the list as a more effective defect list for new and future owners checking
Ongoing issues
1. Rattling doors / Dashboard / A pillar area - When going over bumps
2. Creaking door when opening
3. Washer hose poor quality which can easily detached - check for leakage especially the rear host
4. Bad odor air conditioning
5. Glove compartment not closely fitted
6. "Beep beep" sound when going through bumps (front sensors needs to be adjusted)
7. Daytime running lights - check for consistent brightness both left and right [1.6 Premium]
8. Hissing sound from engine
Rare issues
1. Power window unit malfunction - Window drop when door closed
2. Double sided tape skirting peeling off
3. Fluctuating temperature for air conditioner and check air conditioner seals
4. Co driver seat malfunction due to lose wiring
Resolved issues
1. Low RPM Jerking
[Send for update]2. Update HU from version 6.06 to 7.++
[Send for update]3. Delay pick up from standstill
[Send for update. But the throttle speed will still be slower when compared to other cars.] 4. Water vapour inside fog lamps
[Normal. Switching on the lamps for 5-10 min to clear the vapour]5. Manifold Rusty Part Found
[Normal. Its just that Proton did not cover up the rusty part like other manufacturer]6. Steering control (Next/Previous) for USB file works occasionally
[Control works only when the playing Mode is selected from steering control]7. Fluctuating Radio Volume
8. Mudflap behind rear skirting easily falls off
[Slow down when going through bumps, especially the high one]9. Front brake pads got screeching sound when slowing down
[The sound eventually fade off after weeks of driving/1000km service]10. Alarm appear at my radio or HU unit
» Click to show Spoiler - click again to hide... «
QUOTE(Coldknives @ Mar 25 2015, 03:00 PM)
Hi guys, I own a proton iriz 2014 premium. When I was driving today, the hu suddenly show an alarm indicator. I tried restarting the hu and it's still the same. When can go wrong with my car

QUOTE(Piros @ Mar 25 2015, 03:40 PM)
Don't know, I kena that once. Can't navigate, but the radio was playing. Restarted the HU didn't work, on off the engine didn't work either, then off the engine. left the car at my parking, next morning start the car, ok liao. From that faithful day till today, I haven't kena the alarm thingy anymore on my HU.
I think this matter settle already here

try switch on radio, goes to setting, and turn off TA aka Traffic Announcement.
No more alarm or any other warning from radio broadcast.
11. Washer problem
» Click to show Spoiler - click again to hide... «
QUOTE(cybersim2 @ Apr 2 2015, 09:55 AM)
12. Heres a tutorial for those having rattling due to cable label hammering on the plastic in the drivers side glove compartment
» Click to show Spoiler - click again to hide... «
QUOTE(yadea @ May 1 2015, 04:07 PM)
annas473 you might want to pin this.
Heres a tutorial for those having rattling due to cable label hammering on the plastic in the drivers side glove compartment.
1. open the dashboard to the max then pull it following the directions of the arrow.
[attachmentid=4432933][attachmentid=4432934]
2. coil the wire round and attach some tape if it could uncoil in the future.
[attachmentid=4432935]
13. Guide of how to open the area to fix your disconnected hose back for the front windscreen wiper sprays (credut to
yadea)
» Click to show Spoiler - click again to hide... «
QUOTE(yadea @ Jun 14 2015, 12:11 PM)
Here is the guide of how to open the area to fix your disconnected hose back for the front windscreen wiper sprays.
[attachmentid=4485457]
Unlock these clips first then pull in the direction of the arrow. Beware that at the left side of the cover there is overlapping plastic(cover's plastic is held in by the other plastic). Be gentle when doing this.
[attachmentid=4485458]
The clips.
[attachmentid=4485459]
Stick ur hand in here and feel for the hose. Reattach it then try spraying for a few secs.
Tagging
annas473 to tag post.
14. Service Center & Proton Iriz CVT Gearbox Issue. Batch 2014 & 2015 TCU different. Credit to
JPLim» Click to show Spoiler - click again to hide... «
QUOTE
QUOTE(JPLim @ Jun 24 2015, 08:55 PM)
Some update for my CVT issue to share here. My service center foreman has helped me to send the car to JB Plentong branch sc on my behalf. After two days investigation, Plentong sc concluded that that's a problem with my secondary pulley sensor based on cvt error code that they have obtained from TCU. Then, they told my dad to drive the car back and they will call us for sensor replacement once they obtain the new sensor.
I'm a bit doubtful about the faulty sensor conclusion as my car was perfectly okay before the update of TCU firmware. So, I've written an email to Punch Powertrain Malaysia yesterday for seeking their advice. Today, I've received Punch Powertrain Malaysia reply (was surprised with their super fast action :-) ). According to Punch Powertrain, the CVT gearbox used in 2014 and 2015 batches are different!!! There's no new firmware update needed for 2015 batch. If the 2015 batch car TCU was flashed with 2014 CVT TCU firmware (as in my case), the CVT warning will be triggered due to different gearbox types. Most likely, it's not needed to change my secondary pulley sensor :-S I've attached the snapshot of his reply.
I'll go to sc again on coming Monday to verify that (still on business trip in Taiwan till Saturday). Will update you guys after my trip!
Lesson learnt here: Proton SC staffs are not well trained and it's always good to seek advice from expert! For those 2015 Iriz car owners, it's not needed to update TCU firmware!!!
1. Install ES Explorer at Head Unit. Credit to
jaychew90 &
xxawesomexx» Click to show Spoiler - click again to hide... «
QUOTE(jaychew90 @ Mar 23 2015, 10:39 PM)
1.Download es file explorer apk file and rename it to es.apk
2.Put it into a thumbdrive and plug it into the HU
3.Go to HU browsers and type this on top:
file://mnt/sdcard/udisk/es.apk
4.A window will pop up and select go to setting
5.Tick "Unknown sources" in order to allow sideloading
6.Now you'll have es explorer and you can sideload other apk files using this app
By all means. All credits to xxawesomexx. Not me.