AMD ATHLON XP BARTON


Special thanks Da Dinster man, borrowed template from there. Thnx to the Din
To datto, who compiled the locked/unlocked list. nvmd about the unsorted heh i do that later.
And kelvin_hata for prodding me to get the update done!

Let Start
CALLING ALL DESKTOP BARTONS BRING ON THE SPEED THE HIGHEST YOU CAN GO BY ANY MEANS! LETS SHOW THAT ITS NOT LEFT TO THE MOBILES!!
Lets keep this alive!!


What you Need For the Ranking
1. SCREENY FROM CPU-Z
2. SCREENY FROM SP2004 MINIMUM 1 HOUR. more if you like
http://sp2004.fre3.com/
3. State cooling method.
4. State the Vcore.
5. State Locked/Unlocked
6. Any other information you would like. ie stepping codes, vdimm, cpu/ram ratio, blah....

The Top of the DESK


_/ Locked \_

1. gr2000 | 3000+ | 2615mhz | 2.0v | TT Bigwater SE |
2. amyhs99 | 2500+ | 2598mhz | 1.9v | CM Aero7+
3. KuC|nG^S|aY3R | 2500+ | 2552mhz | 1.95v | watercool |
4. jujuzombie | 2500+ | 2530 mhz | 1.95v | BigWater | AQYHA0409XPMW
5. zamree7 | 2600+ | 2497mhz | 1.65v | Thermaltake Silent Tower |
6. CHICHANOS | 2500+ | 2425mhz | 1.875v | TT volcano 7+ | AQYFA0343XPMW
7. Austin | 2500+ | 2402mhz | 1.55v | Thermaltake Pipe101 | AQYHA 0409XPMW
8. Fattyfei | 2600+ | 2387mhz | 1.808v | SLK-900A + TT UFO 90mm | AQYHA 0415 RPYW
9. -r|E'|quad- | 2500+ | 2308mhz | 1.82v | T.T polo 735 |
10. ceo684 | 2600+ | 2269mhz | 1.872v | TT Silent boost + 80mm UV + 120mm NMB + National 16" tablefan LOL!
11. computer idiot | 2600+ | 2209mhz | 1.688v | T.T Polo 735 |
12. loped | 2500+ | 2004mhz | 1.70v | Vantec Aeroflow |


_/ UN-Locked \_

1. tone | 2600+ | 2773mhz | 1.9v | TT Silent Tower with Delta fan | AQYHA 0401 VPMW
2. flowarh | 2600+ | 2606mhz | 1.80v | ThermalRight SI97 with Delta FF 80mm | 0351 MPMW
3. davidletterboyz | 2600+ | 2606 mhz | 1.728v | Stock AMD cooler | AQYHA0401VPMW *updated proc*
4. kelvin_hata | 2500+ | 2575mhz | 2.0v | TT Bigwater & DeltaFan |
5. datto | 2600+ | 2535mhz | 1.856v | CM VortexDream 7 |
6. v_dracul666 | 2500+ | 2511mhz | 1.8v | Aero7 |
7. soulfly | 2800+ | 2505mhz | 1.7 | SP-97 Smartfan2 |
8. sOuNdStOrM | 2800+ | 2500mhz | 1.75v | TT SilentTower
9. evildonkey | 2500+ | 2407mhz | 1.975v | WaterCooling |
10. charge-n-go | 2500+ | 2405 mhz | 1.85v | SLK-800A 4800rpm smart fan II |
11. Hoodlums | 2600+ | 2405mhz | 1.75v | Aero 7+ | AQUCA 0326TPAW
12. Uzairi | 2500+ | 2398mhz | 1.792v | watercool-nirox-aleckblock-bulkhyrad | AQZFA0336SPMW [MP Enabled]
13. ceo684 | 2500+ | 2321mhz | 1.904v | TT SilentBoost |
14. slash | 2500+ | 2282mhz | 1.825v | slk800 + 80mm ystech fan
15. heblms | 2600+ | 2205mhz | 1.825v | thermaltake pipe 101 plus delta
16. SuperHero | 2500+ | 2205mhz | 1.8v | ThermalTake Valcano 12 | AXDA2500DKV4 0324 SPEW
17. ah_khoo | 2600+ | 2194mhz | 1.65v | Aero7+ | aquca 0320rpaw

This post has been edited by jujuzombie: Nov 24 2005, 02:33 PM

i go first

barton 2500+
msi K7N2 delta L
2x256 kvr cacat ram.
bigwater cooling.
cant remember stepping.
ZOOM

AMD Barton 2500+ (air cooled)
Blue core
AXDA2500DKV4D
AQUCA0323UPBW
4133591280937

On Epox KT333, brandless PSU, 256MB of DDR RAM Winbond AH6 chipset, and Vcore set to 1.40V in BIOS. (Shown variation between 1.425V to 1.450V)

This post has been edited by davidletterboyz: Dec 28 2004, 01:11 PM


Attached thumbnail(s)

wa okay davidletterboyz thanks
undervolting? y ah?

come keep it comin!

hi,

since you are using TT bigwater, what is your full load temp @ highest clock?

if the temp is below 46C close case, i might want to go for bigwater.

My o/c system :
specification as stated in signature (hostel PC).

The barton stepping not very sure, js know it's around 0309 batch.

This post has been edited by charge-n-go: Dec 28 2004, 06:23 PM


Attached thumbnail(s)

Highest clock is in this thread so far didn't take temps for it but at current state idle at 40.5.
room temp is about 30-31

readings at 2.2ghz using mbm5 which remember is not even close to accurate because of the winbond 2 sensor.
1500 rpm
ilde 47 load 50

this is same as above but using the aerogate 2 thermo probe not accurate but hopefully closer
idle 40 load 43

Brandless 300W PSU here.

Edit: My stock speed is 2500+ and o/ced to 2700+.

This post has been edited by davidletterboyz: Dec 28 2004, 07:58 PM

Here's mine. . Maxed out at 2.38Ghz with 1.808V FSB:207Mhz Temp:55C. Too bad my board cannot overvolt more than 1.8 . Normal usage is 2.2GHz FSB: 195Mhz Temp: 49-53C.

How to know Barton unlock or not? My Barton 2600....



This post has been edited by ikan_semilang: Dec 28 2004, 08:42 PM

nice job there as previous thread mia ledi...

here's mine:

axp 2600+ @ 2.2GHz (1.65V in bios)
Abit NF7
2*512MB BTJ
.......



edited:

steppin: aquca 0320rpaw
air-cooled: sucky aero 7+

This post has been edited by ah_khoo: Dec 28 2004, 09:36 PM

barton 2500+
GA-7N400-L nForce2 Ultra 400
512 ddr ram
air cooled ( T.T polo 735 )




Attached thumbnail(s)

this is mine.......

room temp ??????(i did't know but my room using air-cond and without using a casing)


Attached thumbnail(s)

WOW, 2.5GHz+!! Good good!

Nothing to brag at all... Stock XP 2500+ (Barton) running stock.

I have this thing against o/cing cuz they wear out your components 2-5x faster. So instead of a Proc that last 5 years, it'll last a year before it dies.

Dude, this is O/Cer United!!!! Those sentences u posted are EXTREMELY insulting j/k j/k!!

Anyways, that's ur opinion.

@v_dracul666

nice speed there... betcha can reach higher with betta board...

c'mon, challenge m-barton for d-barton sake...

hmmm, just my personal opinion, looks like bigwater is not really good for overclocking, coz my previous HSF Aerocool DP-102 can do better than that.

My 2600+ Barton.
DFI Infinity
Winbond BH6 512mb
Thermaltake Volcano 12 Extreme on Delta Focusflow 80mm fan.
Enlight 420w psu.

(This is my old record of 1.9vcore at 2.5ghz with 2600+)

uploading screenie ... thru photobucket...



This post has been edited by flowerh: Jan 1 2005, 01:54 AM

wah.... desktop barton also detected as ukn cpu ? how about it's power ?

depends how u o/c. If stick back to default voltage, or within +-0.05V range, the CPU can last as long as non o/c chip provided both o/c and non o/c setting has around the same temperature.

oop i meant how come the vcore set so low at 1.45 somemore.
kinda like the mobile version.
just curious.

heh maybe true that the bigwater is not a stellar performer.
but i'm more into that it is really quiet at the speed i set.

and the rest of my comp is already really quiet. come home from work i thought my comp switched off, didn't hear the fans running. heh heh.

I don't know....but the o/cbility is not as good for extreme case. So, this is for downclocking CPU lol.

davidletterboyz : heh ok cool.

FlowerH: welcome back, thread belonged to you before it dissapeared heh heh.
BTW the screenie dead leh. no pic wan.

barton 2600+,vcore 1.825v,
thermaltake pipe 101 plus delta fan
DFI NFII Ultra Infinity,
512mb ddr400,vdimm 2.9


wana go for higher soon....


Attached thumbnail(s)

Thanks for the contribution. COme
SOme more. I'm sure got better than 2.5 gig right

must be a slow new year.

Bring on the speed.!

I am trying to get mine stable at 2.6ghz atleast..
Been busy working and ...eating . lol ...

Previously there are many desktop barton user who posted their result, i wonder where are them now...

Yeah i there are so many before but now i guess they all on holiday haha.

hopefully got more later.

I dun hv such a big ambition, can do 2.4GHz ++ i am happy already. Today finally got 1 month uptime using old settings, now restarted to test new o/c settings lor

flowerh, i m waiting for your 260x10 @ 2-2-2-10, hahaha.

Here's my updated o/c screenie (using SLK800 with 4800rpm smart fan II)
Vcore = 1.85V

This post has been edited by charge-n-go: Jan 1 2005, 11:24 PM


Attached thumbnail(s)

No more 2-2-2-11 for me as my one stick of 256MB HyperX BH5 just die on me and my other BH6 was sold to other forummer already. Now just using D43 but still can go 255fsb.

hmm forgot my stepping codes already.
the only way to check is by taking the heatsink off right?

barton 2500+, vcore 1.825v
slk800 + 80mm ystech fan
DFI Infinity
Winbond BH6 512mb
Enlight 420w psu

My 0351 MPMW 2600+ Desktop Barton.
On DFI Ultra Infinity Mobo.
Kingston D43 Ram.
Enlight Psu.
Cooled with ThermalRight SI97 with Delta FF 80mm.

Currenty at 2.5Ghz @ 1.65v




Attached thumbnail(s)

edit

This post has been edited by kucingfight: Jan 3 2005, 01:09 AM

Wa WA flowarh. thats damn sweet
2.5 on default, well desktop, voltage.

since i can only push my fsb i think maybe have to use devider for my ram lah. my mobo also cannot give me more options higher than 2.7vdimm. ah well....

btw anyone can tell me whats the diff between. large and small, in place fft.
blend would be a mix of both, he he i can tell.

Processor : AMD Athlon XP Barton 2600+
Stepping : AXDA2600DKV4D 4143713260046 AQUCA 0326TPAW
Cooler : Aero 7+
PSU : 400W Ayam Brand
Vcore : 1.75V

Barton 2600+

eep hoodlums can't get to the screenie.

say i gotta login....??

Hehe, when he is done, I think I'm out lol.

davidletterboyz : ??huh??

oh wait i get it now. no lah. i extendlah the list
i not say its top ten only mah. he he.

Barton 2600+
Sorry...

Kekekeke Like that also can.

c'mon davidletterboyz, all u need is a good mobo, then ya 2500+ definately can be in top 10, top 5 maybe...

1.40v (in bios rite?) for stock speed is definately cun, mine can do stock speed with 1.45v...

Yeah, I'm still surveying for a good mobo.

DFI Ultra Infinity or Lanparty...

can't get any better than this

Yeah, but it's a tad $$, might directly jump to A64 with that amount of $.

*double post*

This post has been edited by flowerh: Jan 3 2005, 06:45 PM

*double post due to slow streamyx*

This post has been edited by flowerh: Jan 3 2005, 06:55 PM

wah so fast

Congrats

Sorry very lagging here so i uploaded at photobucket.com

Here is the big picture of it... prime95 and SP2004 for an hour . (still running now)

thanks tictac.

My newest record at 2.6ghz @ 1.80vcore.

Attached my screenie.

Bravoooo!!!!!!!!!!!!!!!!!!Flowerh

Thank you. Sorry to taken your position. You can do better, hope to see higher ghz from u soon.

UPdated the new Top of the DEsk!

come bring it higher.

hehe killed bios last night. after seeing flowerh go so high.

anyone here can suggest something, can go

here http://forum.lowyat.net/index.php?showtopic=115411

so as not to clog this thread. thanks ppl!

Abit AN7
3X KVR BT-D43 256MB
Vcore 1.688
Vdimm 2.8
T.T POLO 735
Chapalang PSU that come with Chapalang Casing(RM 80 for both )


Attached thumbnail(s)

Thanks ppl!

computer. your cpu is what?

from your screeny the multi is 11.5 ......2600+?

yup...
2600+ locked

jujuzombie, pump up vcore and see how much u can o/c ?

This is mine....

Watercooled with aleck's waterblock,nirox p2800 pump,bulkhy's rad.
Other info can get from my sig...
slow here..so i use link instead...


http://img.photobucket.com/albums/v613/moh...i/My%20Pc/2.jpg

This post has been edited by uzairi: Jan 8 2005, 03:00 AM

i've tried 2.5Ghz but with a whooping 2.1vcore..
wanna prime oso scared...

here's the link

http://img.photobucket.com/albums/v613/moh...My%20Pc/At2.jpg

how to take the screen shot of the SP2004 a?

press CTRL+PrintScreen when u want to make the screenshot..

ok ok..thanks

already try..nothing happen

You need to paste it on MS Paint after print screen.

He he i did 2520 with 1.7 V last week.

then i main main and killed my bios.

now i go and kill my frens one when i was trying to hot flash.
oh he bengang man.

OMG thats serious shiet. How u main main ur bios until u killed it? flash and re-flash? previously i did like 10 times of flashing in a few hours ..nothing happened. try the best bios and ended up still with the OW's 1/31 bios.

Hehe went to bios to check the settings after 2.52 gig. i didn't change anything else. but selected save and exit.
then i went saving to ........and got stuck there.
so i wait loh. after a while i reboot nothing. clear cmos. and set safe jumper. nothing.
so dieded.

best part go my fren house to try and hot flash. set up his mobo on the table with the floppy connected. like in www.rojakpot.com then when to bios to check that i selected floppy first boot. (already set previously i forgot) so then click save and exit. LO and BehOld! it did exactly the same thing as my board. it hung while saving. i stood there and my fren .... so now we both got new boards. he needs his comp for business one, so no time to send in the boards.

Me going to sell my CPU + MOBO + RAM in a few minutes. Have to say good bye to this thread.

why selling

davidletter well wish you well on your new system. (sell must be upgrading leh)

Well i'm back on track with the Delta 2, no really the msi delta 2. but the bios version B4 sucks. i can't use 200 fsb with any stability, as confirmed in the msi forums. Well back to using the B3 bios. but floppy died.....sigh.....

Any more clockers there for the desktop come come!

can i join da club... this is mine OCed rig...
stock voltage..
HSF Thermaltake Silent Tower..
idle temp -- 48c
full load -- 54c
will try to oc more...




Attached thumbnail(s)

Upgrading....maybe not....

Thanks, dude. But maybe downgrading..... Can't justify the $.

Eh sell pc to downgrade?

does not compute. y not keep the curremt system?

doin 200FSB on default voltage is sweet...

here's mine
all details inside the screenie


Attached thumbnail(s)

just got it barton 3000 dun no much can go? any one know this processor code can o/c?
AXDA3000dkv4d
y940602h40061
aqyha 0429 xpcw

if u manage to get it run on 200FSB(most of d barton manage to do so), i think atleast 2.6GHz(13*200)...

no good 2.4G at 1.8v

2.6G a little bit hard la...

it might depend on whether it's a gud clocker or not thou...

Stock speed is 2800+ @ 2083MHz
Can't reach FSB 200MHz, error in SP2004.
Stable at FSB 195MHz (Forgotten to screenshot SP2004, will do it again later)
Cooled by TT Silent Tower
Vcore: 1.6v (Default)
Max temp: 50C


Attached thumbnail(s)

Prime stable?

reach 2.5Ghz...

Barton 2600+(Oced 2.497Ghz)
HSF TT Silent Tower
Temp(Full Load) - 61
Idle - 54


Attached thumbnail(s)

wah brother zamree oledi sit on no 3...
congrate... so how the xms doin on A7n8X-E deluxe..
think u should get ram booster to get the ram flying...
just my 2 cents

Sure no prob you get the screenie first lah then i update the listings



-->zamree7

WAAA knock me out from top 3!!

HAHAHA good job man!



-->3431

come just O'clock it and post. join the listings
then can go back and clock somemore.

thanx jujuzombie...
but i know u can beat mine with ur rig...
just pump ur voltage up n go for higher Oced...

Updated:

Pushed it a little higher to FSB 196MHz
Reached 2.447GHz (196x12.5)
Full load: 51.5C
Default Vcore



This post has been edited by sOuNdStOrM: Jan 27 2005, 02:00 AM


Attached thumbnail(s)

Should set the test to be Large FFT to test the CPU.

Hi ppl you know doing this prime thing doesn't really say much of the stability it seems.

anyway got a problem. current setup.
multi 221x11 (same as the ranking speed i used)
voltage default 1.65 but the new msi k7n2 delta 2 seems to report back 1.61 volts. it still boots and primes the whole night.

Ram is 2.5-3-3-11 some Geil value i bought from a forumer can't remember name the 512 dual channel kit. 1:1 at 2.7V

thing is i main HL2 seems to be 15-20 min i hang comp. WTF!

increase the cpu voltage in the bios so that the reading is close to 1.7. (bios setting actually at 1.725)
Main HL2 still friggin hangs, though i think its also around 15-20 min...

any suggestions. loosen timing tighten timing increase ram volt. MORE cpu volt? haha

Thanks

It might be your vga card. Maybe your PSU can't support that much power?

hmm dunno i shall look into the vga card
its a modestly overclocked. msi FX 5700 at 480/650
which seems to run fine when i run the cpu at the usual 3200+ speed.
but will try at the default and see and run the cpu at 2.4 gig.

PSU just bought the CM (whatever) power 450. (he he like the quite fan)
so i guess that rules that out i suppose.

Thanks man any other ideas?