wah.. my locked barton can do 2.15 stock cooling. any faster needs a TT v12. (havent bought a better cooler for it)

Not so fast dude.. hehehhee.. still can do 2.2 with this old dino 1800+

wats so powerful about the barton vs tbred both at 2200mhz? only 256 kb more cache, a PR of 100+ points more.

eh.. 0339 is the lock-start batch... 04xx all confirm locked

Only works on VIA or SiS boards, not on NF2 boards.

lower the multiplier and increase fsb

Hard to OC loh, 166x13 is already 2158mhz. Try using 170fsb again with increased voltage - ur default is 1.65v right - so try 1.75v or 1.80v... What are ur temps?

This post has been edited by ceo684: Sep 18 2005, 12:25 AM

Stock heatsink?

Pump up the voltage till you can boot at 170fsb. its likely that this voltage is just enough for booting but not stable, might need to pump voltage higher another step to get it stable

Is it prime stable? Idle temps are nothing, must see the max temps at full load while running prime95;

tighten those timings up, 11-3-3-2
lower the vddr to 2.7v

NF7 lah... Nforce 2.... 2-3-3-11 would be better, works with any ram. i am assuming he is using standard valueram.

so after talking so much... how's it OCing?

Hmm. My stewpid KW7 (KT880) board no pci lock, so how far would anyone push the pci speed for 24/7? currently running 35, noprob. Probably go higher, around 37 or 38?

Or stick with 210fsb (damn stable of cos ) and pinmod the multiplier? (Stewpid board again, bios cannot adjust)

This post has been edited by ceo684: Oct 2 2005, 04:16 AM

Spam??????

And this? Super extra spam?

who's barton? no head no tail repeating questions. you must be even more stupid.

This post has been edited by ceo684: Oct 21 2005, 01:02 AM

CPU: AXP Barton 2600+ (Locked)
MB: NF7-S v2.0
RAM: 2x512MB AIR TCCC 1x512 KVR BT-D43
Stepping: crap
Cooling: TT Silent boost + 80mm UV + 120mm NMB + National 16" tablefan




CPU: AXP Barton 2500 Unlocked
MB: Abit KW7 (KT880)
RAM: 2x Apacer BT-D43
Stepping: Week 0336
Cooling: TT Silent boost



This post has been edited by ceo684: Oct 22 2005, 09:04 PM

I'm on desktop bartons lah. Voltage tarak tinggi tarak stable.

U mean both or the 2500? The 2500 needs >1.85 <1.90 voltage I think. Stupid mobo only got 6,12,or 18% vcore options.

This post has been edited by ceo684: Oct 23 2005, 05:49 PM

How far (temp) do you all dare to push (for the 1hr prime thing)? 65? 70?

Ur barton is only 2 months old? Hmm..no chance of unlocking for desktop bartons over week 39 2003. Try going for 190x11.5 then.. around 1.85vcore or so..