Powered by,
User List
Deneb and Newer Architechture
» Click to show Spoiler - click again to hide... «
This post has been edited by AMDAthlon: Jul 5 2010, 09:27 AM
AMD® Socket AM2&AM3 Overclocking V23, It has come!Bulldozer heat is around us.
|
|
 Jul 5 2010, 09:17 AM, updated 16y ago
Show posts by this member only | Post
#1
|
 
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star  
|
Powered by, User List Deneb and Newer Architechture This post has been edited by AMDAthlon: Jul 5 2010, 09:27 AM |
Quote|
|
|
|
|
Jul 5 2010, 09:18 AM
Show posts by this member only | Post
#2
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Agena,Windsor and Older Architechture » Click to show Spoiler - click again to hide... « Rules: Show your SuperPi/HyperPi 32M, Orthos(Blend) [>1 hour] or OCCT with CPU-Z[CPU and Memory]   Please provide your hardware detail using the code below : CODE Processor Model | Overclocked Speed | LYN Nick | Mobo Model | Ram Type | Ram Speed | Ram Timing | Cooler Model Example : CODE Athlon 4600+F3 | 3450Mhz | AMDAthlon |Abit AX78 | OCZ DDR2 6400 | 850Mhz | 4-4-4-12-16 | AMD Stock Cooler |
|
|
Jul 5 2010, 09:18 AM
Show posts by this member only | Post
#3
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
AM2/AM2+ SPI 1M Records Deneb and Newer Architechture (X3 & X4 Core) » Click to show Spoiler - click again to hide... « Agena,Windsor and Older Architechture(X4 & X3 Core ) » Click to show Spoiler - click again to hide... « Agena,Windsor and Older Architechture(X2 & Single Core) » Click to show Spoiler - click again to hide... « Rules : Show your SuperPI 1M Screen Shot Please make sure that it is your final score before you submit into database!  CODE Score | LYN Nick | Processor Model | Speed (HTT x Multi) | Motherboards | Ram model & Capacity | Ram speed & timing | Cooler model Example : CODE 10.109s | AMDFusion |AMD Athlon 64 X2 4600 F3 | 500X7 | Abit AX78 | OCZ 2x2GB DDR2 6400 | 1300Mhz & 3-3-3-3-11-2T | AMD Stock Cooler |
|
|
Jul 5 2010, 09:20 AM
Show posts by this member only | Post
#4
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
AM2 CPU/DDR2 Divider Table » Click to show Spoiler - click again to hide... « AM3 CPU/NB Frequency/DDR3 Divider Table » Click to show Spoiler - click again to hide... « Flashing in DOS environment HP USB Disk Storage Format Tool: http://bootdisk.com/plan40/hpflash1.zip Boot disk for Dos system: http://bootdisk.com/bootdisk.htm » Click to show Spoiler - click again to hide... « Guides DDR2 RAM overclocking - the confusion, Tighter timings or higher frequency : http://forum.lowyat.net/topic/627600 Basic guide - DDR2 ram overclocking : http://forum.lowyat.net/topic/626450 Basic guide - Overclocking a 939/AM2 : http://forum.lowyat.net/topic/625156 Phenom Overclocking Tips : http://www.thetechrepository.com/showthread.php?t=258 Phenom II AM3 Overclocking : http://www.techreaction.net/2009/05/28/phe...ing-essentials/ Phenom II Overclocking Guide : http://www.techreaction.net/forums/showthread.php?t=367 AMD Phenom II Core Unlocking Guide :http://www.overclock.net/amd-cpus/535501-a...king-guide.html PhenomMsrTweaker Guide: Custom Cool 'N Quiet for Overclocks :http://www.overclock.net/amd-cpus/551259-p...ol-n-quiet.html AMD Memory Overclocking Guide :http://www.overclock.net/amd-memory/809889...ming-guide.html Modded BIOS Bios and discussing forum [Modded] : http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi Flash at your own risks.   Useful Threads Advanced AM2+ AMD Chipset Configuration Options and What They Mean :http://www.xtremesystems.org/forums/showthread.php?t=216840 1T vs 2T Command Rate - Is there a Real Performance Difference? : http://www.overclock.net/amd-memory/32605-...rate-there.html List of DDR3/DDR2/DDR IC Chips on various RAM brand Modules : http://www.overclock.net/amd-memory/286688...r-ic-chips.html AM3 CPU's Which Ram Speed is Faster and Which CPU-NB Clock is Best :http://www.overclock.net/amd-memory/555061...eed-faster.html Voltages - What's what and what they mean :http://www.overclock.net/amd-general/76264...-they-mean.html Useful Softwares AMD Overdrive : http://game.amd.com/us-en/drivers_overdrive.aspx?p=1 Coretemp : http://www.alcpu.com/CoreTemp/ HW Monitor : http://www.cpuid.com/hwmonitor.php CPU-z : http://www.cpuid.com/cpuz.php MemSet : http://www.tweakers.fr/memset.html Prime95 : http://www.softpedia.com/get/Others/Home-E...n/Prime95.shtml SuperPI Mod 1.5 : http://dl.techpowerup.com/Benchmarking/super_pi_mod-1.5.zip BAR Edit 3.2 : http://www.tweakers.fr/baredit.html * It is always recomended to use BIOS to Overclock your systems.Use Software-Based if only you want to adjust the voltage on-the-spot.It is still not recomended to use Software-Based to overclock your systems. * Overclocking your systems may or might not harm any of your components depending on what you done to your own systems.Do ensure you have proper cooling,Power Supply and Motherboard.. This post has been edited by AMDAthlon: Sep 30 2010, 11:14 PM |
|
|
Jul 5 2010, 09:36 AM
Show posts by this member only | Post
#6
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Yes, new thread
 More OC to come  |
|
|
|
|
|
Jul 5 2010, 09:55 AM
Show posts by this member only | Post
#7
|
Senior Member
2,484 posts Joined: Nov 2007 From: Nilai,N.S.D.K
|
AMD + Apple ??
http://www.appleinsider.com/articles/10/04..._amd_chips.html http://gizmodo.com/5518885/apple-consideri...-amd-processors hope apple will come vanilla kernel (orig mac kernel) with can support amd proc |
|
|
Jul 5 2010, 10:02 AM
Show posts by this member only | Post
#8
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Digswell..i think i can confirm that when Fusion and maybe Bulldozer comes...
The graphic inside Apple is too sucky and expensive from nVidia.. This post has been edited by AMDAthlon: Jul 5 2010, 10:03 AM |
|
|
Jul 5 2010, 10:13 AM
Show posts by this member only | Post
#9
|
|
Senior Member
2,484 posts Joined: Nov 2007 From: Nilai,N.S.D.K
|
QUOTE(AMDAthlon @ Jul 5 2010, 10:02 AM) Digswell..i think i can confirm that when Fusion and maybe Bulldozer comes... integrated CPU+GPU all from amd is make eazy for apple maker to create their kext driver The graphic inside Apple is too sucky and expensive from nVidia..  and also cutting more cost on apple macbook and macbook pro... and 1 thing is the display color on nvidia ...( all most all photodesinger ) affraid bout it...takut color lari dari orig ati display make more good in coloring ...u can see from iMac with 4670 display vs imac with 9400 display ati HD4670 vs nvidia 9400m on iMAC http://www.macworld.com/article/143636/200...benchmarks.html This post has been edited by digswell: Jul 5 2010, 10:29 AM |
|
|
Jul 5 2010, 10:29 AM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
That is why im waiting for fusion..
It has something special in it. |
|
|
Jul 5 2010, 10:32 AM
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(AMDAthlon @ Jul 5 2010, 10:29 AM) That is why im waiting for fusion.. Something special meh? A secret receipe eh? hehehehe It has something special in it. |
|
|
Jul 5 2010, 10:35 AM
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
@ shinjite,
bro, what do u mean by "For Prime95, if using CPU Tweaker, set the tFAW to 30"? d way i interpret it is by using tFAW @ 30 can reduce vcore? mind to elaborate more?  QUOTE(cloudwan @ Jul 5 2010, 10:32 AM) Something special meh? A secret receipe eh? hehehehe by d time fusion available we mite need to change mobo again, 690g > fusion board should be a big leap...  |
|
|
Jul 5 2010, 10:45 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(ah_khoo @ Jul 5 2010, 10:35 AM) @ shinjite, Base on an otai's experience and some forums I searched, tFAW at 30 helps on prime 95 stability on Intel chipsbro, what do u mean by "For Prime95, if using CPU Tweaker, set the tFAW to 30"? d way i interpret it is by using tFAW @ 30 can reduce vcore? mind to elaborate more? So I suggest you try that for your friend's AMD chip as well |
|
|
|
|
|
Jul 5 2010, 10:47 AM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Fusion will use diff socket o.. i forgot what it is.. something like FT - -..
Getting Fusion is really for low-budget users,becos no one knows the compatibility of the processor on Fusion Socket and the graphic quite decent(i think around 9800GT) First Revision Fusion will use Phenom II Arch anyway.. This post has been edited by AMDAthlon: Jul 5 2010, 10:48 AM |
|
|
Jul 5 2010, 10:52 AM
|
|
Senior Member
2,484 posts Joined: Nov 2007 From: Nilai,N.S.D.K
|
2 in 1 on single chip....mean cpu+gpu
best design use in notebook or netbook... for apple is good for macbook and imac.. just hope the talks between AMD and Apple are successful |
|
|
Jul 5 2010, 10:58 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 5 2010, 10:45 AM) Base on an otai's experience and some forums I searched, tFAW at 30 helps on prime 95 stability on Intel chips thx for d tips bro, i'll try that out for my 4400+, d rented 1055t is goin 2ml so i'll spare d chip a torture... So I suggest you try that for your friend's AMD chip as well  @ bro digs, how is ya i7 build bro? completed? |
|
|
Jul 5 2010, 12:22 PM
|
|
Senior Member
2,484 posts Joined: Nov 2007 From: Nilai,N.S.D.K
|
QUOTE(ah_khoo @ Jul 5 2010, 10:58 AM) thx for d tips bro, i'll try that out for my 4400+, d rented 1055t is goin 2ml so i'll spare d chip a torture... no yet build...getting blur choosing mobo ...price so pricey and need to funding more $$ . tis is wat i hate it @ bro digs, how is ya i7 build bro? completed? wait another 2 more month see wat is going with amd proc hackintosh rig |
|
|
Jul 5 2010, 03:08 PM
|
Senior Member
2,911 posts Joined: Mar 2009 
|
QUOTE(cloudwan @ Jul 4 2010, 11:39 PM) Try using these settings, oc milage may vary but u can use it as a guideline ah: So all I have to do is..download the Prime95 from the first post. OC it, and run the prime95 test to stress it out for 1 hour? What happens if my oc fail when stressing? Disregard the ram's settings tho, just leave ur ram at stock setting.. » Click to show Spoiler - click again to hide... « |
|
|
Jul 5 2010, 03:22 PM
|
Senior Member
8,753 posts Joined: Jan 2003
|
the prime95 halted..
don't worry no kaboom |
|
|
Jul 5 2010, 03:30 PM
|
Senior Member
4,196 posts Joined: Oct 2007
|
so fast v23 edi !
|
|
|
Jul 5 2010, 03:34 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(8tvt @ Jul 5 2010, 03:22 PM) the prime95 halted.. then should i use the prime95?don't worry no kaboom |
|
|
Jul 5 2010, 03:35 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Yeah u should
|
|
|
Jul 5 2010, 03:37 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
My CPU temperature already reached 45-46 with 15-20% of CPU usage with stock speed which is 3.2GHz. Safe for me to go further?
|
|
|
Jul 5 2010, 03:45 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Always count the 100% 1....whats ur temp at full load?
|
|
|
Jul 5 2010, 03:59 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Havent test on full load. Havent even dl the prime95..the thread was like 5 years ago so I asked first before downloading...
|
|
|
Jul 5 2010, 04:05 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(clon12 @ Jul 5 2010, 03:59 PM) Havent test on full load. Havent even dl the prime95..the thread was like 5 years ago so I asked first before downloading... LOL Prime95 website is always old kinda looking |
|
|
Jul 5 2010, 04:53 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Ok...the one on the front page is broken link I assume. Any more mirrors?
|
|
|
Jul 5 2010, 05:01 PM
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
googling P95 will result the P95 then since this app is famous..
btw..here u go http://files.extremeoverclocking.com/file.php?f=103 |
|
|
Jul 5 2010, 05:28 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Ok..I try change the multiplier to 17x and run the test on all 4 cores..but which option should I use? the one that uses ALOT of RAM or the one that uses the least.
|
|
|
Jul 5 2010, 05:54 PM
|
|
Senior Member
9,436 posts Joined: Oct 2006 From: Oz  
|
QUOTE(clon12 @ Jul 5 2010, 05:28 PM) Ok..I try change the multiplier to 17x and run the test on all 4 cores..but which option should I use? the one that uses ALOT of RAM or the one that uses the least. Uses the least if stress both, whole system too hang. |
|
|
Jul 5 2010, 05:59 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
I chose the Blend option. Now stressing. System going on 3.4GHz and 56-58 degree now.
» Click to show Spoiler - click again to hide... « |
|
|
Jul 5 2010, 06:00 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Let it run for some time~~
Then try to increase again your clockspeed |
|
|
Jul 5 2010, 06:00 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
ok sure..dont pump the voltage yet..that volt i think still can go up to 3.6/3.5..
|
|
|
Jul 5 2010, 06:04 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
So I continue on stressing and increase the multiplier later? I thought the maximum temperature is 62 degree? ><
Edit: Is it >voltage <heat? Added on July 5, 2010, 6:55 pmStress for an hour, temperature never exceeds 59. Drop to 45-46 right after stressing. (: This post has been edited by clon12: Jul 5 2010, 06:55 PM |
|
|
Jul 5 2010, 08:43 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
for d moment, heat is d obstacle for u to achieve higher clock, load temp @ 59'c for a 3.4GHz spells something wrong w/ d coolin, either cooler or bad air flow.
on x4 b50 + hyper 212 plus @ push-pull & el cheapo biostar 790gx a3+, i managed a 3.5GHz w/ load temp @ 52'c (vcore @ 1.3v). voltage (vcore) wise i'm pretty sure u need < 1.3v for a 3.4GHz, not so sure how gud is d air flow of ya case but it'll affect temp for all components quite alot. do something bout it & then u can go w/ higher no. hyper 212+ should be able to handle up to 3.8GHz w/ gud air flow in ya case. |
|
|
Jul 5 2010, 09:47 PM
|
Senior Member
1,945 posts Joined: Mar 2008 From: Malaya
|
priming nao, only + speed to 217@3.906GHz
multi kenot liao,sad stuck at x18...  |
|
|
Jul 5 2010, 10:20 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
I have already installed the Hyper 212 Plus fan towards the behind of the casing and installed another fan at the back to blow the hot air out. Another fan is installed at the side of the casing to blow towards the Hyper 212 Plus. All I could think of now is adding another fan on the other side of the Hyper 212 Plus making it dual fan.
|
|
|
Jul 5 2010, 10:38 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(clon12 @ Jul 5 2010, 10:20 PM) I have already installed the Hyper 212 Plus fan towards the behind of the casing and installed another fan at the back to blow the hot air out. Another fan is installed at the side of the casing to blow towards the Hyper 212 Plus. All I could think of now is adding another fan on the other side of the Hyper 212 Plus making it dual fan. IIANM Hyper 212+ works best when in an push pull config just like ah_khoo said |
|
|
Jul 5 2010, 11:13 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
push and pull?
|
|
|
Jul 6 2010, 01:14 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(clon12 @ Jul 5 2010, 11:13 PM) push and pull? Push and pull means u use 2 fans on the hsf @ front & back, one pushing air & one pulling the air.. |
|
|
Jul 6 2010, 08:50 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(Sib @ Jul 5 2010, 09:47 PM) priming nao, only + speed to 217@3.906GHz bro, why bother bout oc w/ cpu multi while d board is capable of decent htt oc? could it be d ram that's holdin u back? multi kenot liao,sad stuck at x18... QUOTE(clon12 @ Jul 5 2010, 10:20 PM) I have already installed the Hyper 212 Plus fan towards the behind of the casing and installed another fan at the back to blow the hot air out. Another fan is installed at the side of the casing to blow towards the Hyper 212 Plus. All I could think of now is adding another fan on the other side of the Hyper 212 Plus making it dual fan. how many exhaust fan u have there in ya case? what case ur usin actually? mind to post ss @ load w/ hwmonitor? gotta check what are d temp for all components of ya board. c3 (not all thou but i can safely say quite a no) is capable of nice figure in oc.  |
|
|
Jul 6 2010, 09:37 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
|
|
|
Jul 6 2010, 10:15 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(8tvt @ Jul 6 2010, 09:37 AM) mcm best je.. Wow brapa byk heatpipe tuh » Click to show Spoiler - click again to hide... « http://vr-zone.com/articles/scythe-launche...ooler/9329.html  |
|
|
Jul 6 2010, 10:54 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
The latest version of the Scythe ninja
|
|
|
Jul 6 2010, 11:00 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
i always luv scythe products, but sadly after d great ninja, they hardly have product which can compete against big boys like tr or noctua. their products always reasonably priced & oso easily available here in sg. hopefully this ninja 3 will do good.
This post has been edited by ah_khoo: Jul 6 2010, 11:02 AM |
|
|
Jul 6 2010, 11:02 AM
|
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan
|
can do 4 fans (dual push, dual pull) meh?
 |
|
|
Jul 6 2010, 11:04 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(xixo_12 @ Jul 6 2010, 11:02 AM) can do 4 fans (dual push, dual pull) meh? Wahlau, like that would be a ribut already.. The air going here & there & everywhere |
|
|
Jul 6 2010, 11:08 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
should be like this i think...
 
|
|
|
Jul 6 2010, 12:12 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
so any orientation no problem edy..
|
|
|
Jul 6 2010, 01:15 PM
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ah_khoo @ Jul 6 2010, 11:08 AM) should be like this i think... left & right - push
top & bottom - pull can ka? This post has been edited by dafreak: Jul 6 2010, 01:16 PM |
|
|
Jul 6 2010, 01:35 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(cloudwan @ Jul 6 2010, 01:14 AM) Push and pull means u use 2 fans on the hsf @ front & back, one pushing air & one pulling the air.. Oic..means I put dual fan lo lol..QUOTE(ah_khoo @ Jul 6 2010, 08:50 AM) how many exhaust fan u have there in ya case? what case ur usin actually? mind to post ss @ load w/ hwmonitor? gotta check what are d temp for all components of ya board. c3 (not all thou but i can safely say quite a no) is capable of nice figure in oc. Should be altogether got 3 fans. 1 blowing towards the cooler from the side casing, one with the cooler blowing towards back of the casing and another one located at the back of the casing blowing hot air out. theres another psu fan but i dont think that will affect much  what do you meant by c3? I will try to change the multiplier to 18x and see the temp. If it exceeds 62, will anything happen?  since the max for 955 is 62 degree |
|
|
Jul 6 2010, 01:40 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dafreak @ Jul 6 2010, 01:15 PM) left & right - push it's not a gud idea to put left as push, it is better off act as pull coz movin d hot air outta d case is more important than pushin cool air thru d cooler. same apply to top where pull will be better option instead of push. my 2 cents... top & bottom - pull can ka? This post has been edited by ah_khoo: Jul 6 2010, 02:17 PM |
|
|
Jul 6 2010, 01:42 PM
|
|
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan
|
lol nice drawing for ribut 4 fan
 Perhaps have some problem with mounting later.. |
|
|
Jul 6 2010, 01:47 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(clon12 @ Jul 6 2010, 01:35 PM) what do you meant by c3? 955be got 2 batch, one is c2 (earlier) & c3 (later). c3 offer higher mileage & lower volt @ same clock if compared to c2. 6x'C wont melt ya chip, so worry not, most likely just bsod/prime failure. u must watch out d vcore thou, coz d higher it is d hotter d mosfets will get, d ohtter d latter are, d easier they get toasted (if not actively cooled). I will try to change the multiplier to 18x and see the temp. If it exceeds 62, will anything happen? since the max for 955 is 62 degree QUOTE(xixo_12 @ Jul 6 2010, 01:42 PM) lol nice drawing for ribut 4 fan i know my drawin sucks sis, god has never been kind to me in term of art... Perhaps have some problem with mounting later.. |
|
|
Jul 6 2010, 01:56 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
dont say like that la ..
We have other potential ma.. I wonder if my Tuniq Extreme can tahan till how long.. |
|
|
Jul 6 2010, 02:17 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(ah_khoo @ Jul 6 2010, 01:47 PM) 955be got 2 batch, one is c2 (earlier) & c3 (later). c3 offer higher mileage & lower volt @ same clock if compared to c2. 6x'C wont melt ya chip, so worry not, most likely just bsod/prime failure. u must watch out d vcore thou, coz d higher it is d hotter d mosfets will get, d ohtter d latter are, d easier they get toasted (if not actively cooled). Then how do i see whether mine is c3 or c2? if let say it bsoded, so i just go back to bios and change to my best settings without system failure? i know my drawin sucks sis, god has never been kind to me in term of art... Edit: I've opened my casing, change its position to my desk (photos of my casing will be uploaded soon) and ran some stress test with 3.4GHz. Temperature were better than yesterday! » Click to show Spoiler - click again to hide... « I think with this temp i can go around 3.6-3.8 GHz but must I keep my casing open? >< This post has been edited by clon12: Jul 6 2010, 03:32 PM |
|
|
Jul 6 2010, 03:32 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(clon12 @ Jul 6 2010, 02:17 PM) Then how do i see whether mine is c3 or c2? if let say it bsoded, so i just go back to bios and change to my best settings without system failure? u can check using cpu-zEdit: I've opened my casing, change its position to my desk (photos of my casing will be uploaded soon) and ran some stress test with 3.4GHz. Temperature were better than yesterday! [/SPOILER]  I think with this temp i can go around 3.6-3.8 GHz but must I keep my casing open? >< not stable just change the settings |
|
|
Jul 6 2010, 03:33 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
what do you mean by checking with cpu-z? you mean oc to 3.6-3.8?
|
|
|
Jul 6 2010, 03:34 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
anything and the revision too..
|
|
|
Jul 6 2010, 06:46 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(clon12 @ Jul 6 2010, 03:33 PM) what do you mean by checking with cpu-z? you mean oc to 3.6-3.8? CPUZ basically states out your processor details, processor voltage, which revision, motherboard chipset info, your RAM info as well as your GPU info |
|
|
Jul 6 2010, 06:54 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Yeah so thats the same as the CPUID. but what i dont get is..if the system is not stable, it would have been bsod/cant bootup, but check with cpu-z i cant really find any relevance...><
|
|
|
Jul 6 2010, 07:00 PM
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
You need to have those stability software to do the job.
Eg. Prime95, Linx -pWs- |
|
|
Jul 6 2010, 07:15 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(clon12 @ Jul 6 2010, 06:54 PM) Yeah so thats the same as the CPUID. but what i dont get is..if the system is not stable, it would have been bsod/cant bootup, but check with cpu-z i cant really find any relevance...>< Normally we use CPUZ or other softwares to check the voltages and etc etc under load (thats what I do)This post has been edited by shinjite: Jul 6 2010, 07:15 PM |
|
|
Jul 6 2010, 07:35 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Okay..so now I already increase the multiplier to x18. Heres the screenies
» Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... « so far so good? |
|
|
Jul 6 2010, 07:38 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
So far so good....let it run and see how
|
|
|
Jul 6 2010, 07:58 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
So how long exactly do I have to let it run? It's almost an hour now (:
|
|
|
Jul 6 2010, 08:08 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(clon12 @ Jul 6 2010, 07:58 PM) So how long exactly do I have to let it run? It's almost an hour now (: For stability test usually we let it run atleast for an hour.. Basically if u pass the hour mark then usually ur oc setting is quite solid already, just my 2 cents ah |
|
|
Jul 6 2010, 08:18 PM
|
Senior Member
3,812 posts Joined: Dec 2008 From: Eden 
|
run prime then go sleep. if tomorrow still running, then ok lor. if not, something wrong yo~ (assuming u got decent cooling for it)
me not into OC liao, no moneh to start killing~ |
|
|
Jul 6 2010, 08:26 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
I ran for 59 minutes and no errors were found...I guess the temps are low because its almost night that time. I will try to stress it again tomorrow with maybe a x19 multiplier. By the way, if it crashes it, temps are not the main reason right?
1 more thing which I always forgot to mention. On the first time I change my multiplier to x17, I bootup and went to open HWMonitor and CPUZ suddenly the pc restarts...after that nothing happens. Everything is normal...is there anything I should worry about? |
|
|
Jul 6 2010, 10:58 PM
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(clon12 @ Jul 6 2010, 08:26 PM) I ran for 59 minutes and no errors were found...I guess the temps are low because its almost night that time. I will try to stress it again tomorrow with maybe a x19 multiplier. By the way, if it crashes it, temps are not the main reason right? ur cpu volt no enuf, pump more vcore(when i say more, i do not mean alot, usually i increase by 0.01 volt increment)1 more thing which I always forgot to mention. On the first time I change my multiplier to x17, I bootup and went to open HWMonitor and CPUZ suddenly the pc restarts...after that nothing happens. Everything is normal...is there anything I should worry about? |
|
|
Jul 6 2010, 11:06 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
But now it never happens..so should i increase it?
|
|
|
Jul 6 2010, 11:49 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
try stressing it la n see if its fine. have try stressing it using the in-place large fft option, n change the option " time to run each fft size(in minutes )" from 15 to 1 minute
|
|
|
Jul 7 2010, 02:56 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
|
|
|
Jul 7 2010, 09:38 AM
|
Senior Member
1,298 posts Joined: Aug 2006
|
may i know the max full load temp for 955BE? 59degree? which temp is safe for oc? coz idle temp already 44-45-44-45
|
|
|
Jul 7 2010, 09:43 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(-pWs- @ Jul 7 2010, 02:56 AM) the default speed is higher than 1055T?this for oem only right.. |
|
|
Jul 7 2010, 09:58 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
higher multiplier of 15.5 nice....
|
|
|
Jul 7 2010, 10:12 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
i think that could be d turbo multiplier (under turbo core), hardly heard of lower end chip has higher multi than higher end. some bios of 8xx series allow d use of turbo multis, too bad ahsos el cheapo boards like my fren's 88td-v evo doesn't have d luxury to enjoy such feature, not so sure bout chiv formula or extreme thou...
 This post has been edited by ah_khoo: Jul 7 2010, 10:56 AM |
|
|
Jul 7 2010, 10:21 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
the multiplier is there.. but when set higher than default..
the multiplier stuck @ highest default setting in windows.. |
|
|
Jul 7 2010, 10:49 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 7 2010, 10:12 AM) i think that could be d turbo multiplier (under turbo mode), hardly heard of lower end chip has higher multi than higher end. some bios of 8xx series allow d use of turbo multis, too bad ahsos el cheapo boards like my fren's 88td-v evo doesn't have d luxury to enjoy such feature, not so sure bout chiv formula or extreme thou... Hmmmm tulah, sayang don't have the chance to test it right? |
|
|
Jul 7 2010, 10:56 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 7 2010, 10:49 AM) Hmmmm tulah, sayang don't have the chance to test it right? bro, kasi campak ke sgp lor itu rog, chip wise i can always ask my fren to rent again... |
|
|
Jul 7 2010, 10:59 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
so ah_khoo, hows ur test with prime95 regarding the tFAW set to 30?
|
|
|
Jul 7 2010, 11:14 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 7 2010, 10:59 AM) so ah_khoo, hows ur test with prime95 regarding the tFAW set to 30? haven't test yet, my fren's win 7 screwed up after tested d x6, so last nite busy w/ reinstallation of windos & softwares... wonder why d windows screwed up, i'm pretty sure software related, auto restart under nromal mode but ok in safe mode. could be d turbo v thingy. just realize that we are not able to uninstall program under safe mode in win 7... will ask him to try tonite if he has time... i'm lazy to try that on my 4400+ ancient rig... |
|
|
Jul 7 2010, 11:30 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
using ati gpu? i notice latest driver tend to crash..
|
|
|
Jul 7 2010, 11:36 AM
|
|
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan
|
everyone play with s3x core
this is the new that sound interesting QUOTE At the end of January AMD company presented the processor series phenom II X2 5xx, combining two core 3 mb cache in the third level. Associate reports that AMD plans to release in the second quarter the model phenom II X2 560 (3.3 GHz), and in the third quarter AMD will present the processor phenom II X2 565 (3.4 GHz). The dual core processors phenom II X2 on their frequency potential will overtake Phenom II X4. The new models phenom II X2 will be based on C3 stepping, which brought the support of energy state C1 E and slightly improved frequency potential. The cost of phenom II X2 560/565 processors will be around $100. http://xtreview.com/addcomment-id-11524-vi...-II-X2-560.html |
|
|
Jul 7 2010, 11:49 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 7 2010, 11:30 AM) using ati gpu? i notice latest driver tend to crash.. yup, noticed that too... play dirt 1 oso crash... sheeesshhh... QUOTE(xixo_12 @ Jul 7 2010, 11:36 AM) everyone play with s3x core not everyone leh sis... me don't have d chance oso... my fren managed 2 nites only... this is the new that sound interesting http://xtreview.com/addcomment-id-11524-vi...-II-X2-560.html newer unlockable goodies... why not they use crippled x6 die for these luvly x2... then we can have buy 2 get 4(up to) free... |
|
|
Jul 7 2010, 12:11 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 7 2010, 11:49 AM) yup, noticed that too... play dirt 1 oso crash... sheeesshhh... LOL buy 2 free 4 meh? Like that one month AMD close shop alredi.. not everyone leh sis... me don't have d chance oso... my fren managed 2 nites only... newer unlockable goodies... why not they use crippled x6 die for these luvly x2... then we can have buy 2 get 4(up to) free... I'm still hoping for them to release the 960T, still oklah buy 4 get 2 extra cores |
|
|
Jul 7 2010, 02:21 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(selferino @ Jul 6 2010, 11:49 PM) try stressing it la n see if its fine. have try stressing it using the in-place large fft option, n change the option " time to run each fft size(in minutes )" from 15 to 1 minute » Click to show Spoiler - click again to hide... « I ran the test. The temps are around 52-53 max. I ran it for around 5 minutes only. The temps are quite low maybe because it's raining now (: Going to 19x later! Added on July 7, 2010, 7:55 pmI tried to go to x19. After booting to windows, opened cpu-z,hwmonitor, amd overdrive and prime95 instantly and my pc restarted..so should i increase my voltage? I guess 3.8GHz should be my last oc This post has been edited by clon12: Jul 7 2010, 07:55 PM |
|
|
Jul 7 2010, 09:44 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(8tvt @ Jul 7 2010, 09:43 AM) the default speed is higher than 1055T? Default is lower than 1055Tthis for oem only right.. But can be adjusted to multiplier "x15.5" Ya. Too bad. OEM as stated in the article. -pWs- |
|
|
Jul 7 2010, 09:51 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
aik rog can set ar..
i tried with asus 88 evo last time can set higher multiplier in bios.. but in windows just set to default |
|
|
Jul 7 2010, 10:02 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
QUOTE(xixo_12 @ Jul 7 2010, 11:36 AM) everyone play with s3x core That news quite old lor..this is the new that sound interesting http://xtreview.com/addcomment-id-11524-vi...-II-X2-560.html Now Q3 edy and not seen any 560 nor 565.. |
|
|
Jul 8 2010, 01:00 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(clon12 @ Jul 7 2010, 02:21 PM) » Click to show Spoiler - click again to hide... « I ran the test. The temps are around 52-53 max. I ran it for around 5 minutes only. The temps are quite low maybe because it's raining now (: Going to 19x later! Added on July 7, 2010, 7:55 pmI tried to go to x19. After booting to windows, opened cpu-z,hwmonitor, amd overdrive and prime95 instantly and my pc restarted..so should i increase my voltage? I guess 3.8GHz should be my last oc |
|
|
Jul 8 2010, 01:13 PM
|
Senior Member
618 posts Joined: Dec 2006 From: Metal Box Enterprise JB
|
hi guys
is this OC a good one? or can improve i'm using 800mhz andi didnt use 667mhz(333mhz) to start my RAM overclocking jst start from 400mhz directly wif the timing shown in the picture i try to put down to 333mhz, but i cant exceed 260mhz cpu clock duno y  i use x10 x3 ( reduce my MB temp ?! ) p/s : CPU temp jst fine, it never exceed 58'c, using CM hyper 212 + please advise  This post has been edited by blue16: Jul 8 2010, 01:15 PM |
|
|
Jul 8 2010, 01:21 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Phase 1 completed
Phase 2 will be GPU + GPU block |
|
|
Jul 8 2010, 01:30 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(blue16 @ Jul 8 2010, 01:13 PM) hi guys try play with ram trfc..is this OC a good one? or can improve i'm using 800mhz andi didnt use 667mhz(333mhz) to start my RAM overclocking jst start from 400mhz directly wif the timing shown in the picture i try to put down to 333mhz, but i cant exceed 260mhz cpu clock duno y i use x10 x3 ( reduce my MB temp ?! ) p/s : CPU temp jst fine, it never exceed 58'c, using CM hyper 212 + please advise |
|
|
Jul 8 2010, 01:44 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 8 2010, 01:00 AM) Yes increase voltage Increase to 1.36V? with AMD OD? |
|
|
Jul 8 2010, 04:37 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Before making any voltage increment, you can always check what is on the edge and lower down the divider.
It is not always to play w voltage. 3 cents here. -pWs- |
|
|
Jul 8 2010, 04:43 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 7 2010, 10:59 AM) so ah_khoo, hows ur test with prime95 regarding the tFAW set to 30? just asked my fren tried lastnite, tFAW = 30 gave instant reboot... QUOTE(blue16 @ Jul 8 2010, 01:13 PM) hi guys nice freq on ram, clock wise can be slightly better? is this OC a good one? or can improve i'm using 800mhz andi didnt use 667mhz(333mhz) to start my RAM overclocking jst start from 400mhz directly wif the timing shown in the picture i try to put down to 333mhz, but i cant exceed 260mhz cpu clock duno y i use x10 x3 ( reduce my MB temp ?! ) p/s : CPU temp jst fine, it never exceed 58'c, using CM hyper 212 + please advise what will happen if > 260MHz on htt? instant reboot/bootable but fail in prime?  QUOTE(-pWs- @ Jul 8 2010, 04:37 PM) Before making any voltage increment, you can always check what is on the edge and lower down the divider. bro, old stuff not out, new stuff wont in... let him burn d deneb so that he can have new x6... It is not always to play w voltage. 3 cents here. -pWs- |
|
|
Jul 8 2010, 04:43 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
must try first la.. no need keep asking..
now must senang kira.. 5 cents.. |
|
|
Jul 8 2010, 04:50 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(ah_khoo @ Jul 8 2010, 04:43 PM) just asked my fren tried lastnite, tFAW = 30 gave instant reboot... Means tFAW 30 is not good for AMD |
|
|
Jul 8 2010, 06:50 PM
|
Junior Member
31 posts Joined: Oct 2008
|
any 1 oc 810 here?
|
|
|
Jul 8 2010, 08:04 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(-pWs- @ Jul 8 2010, 04:37 PM) Before making any voltage increment, you can always check what is on the edge and lower down the divider. divider or multiplier? I can't really get the full meaning of your sentence though It is not always to play w voltage. 3 cents here. -pWs- QUOTE(ah_khoo @ Jul 8 2010, 04:43 PM) bro, old stuff not out, new stuff wont in... let him burn d deneb so that he can have new x6... That OLD stuff is somehow just 4 days old |
|
|
Jul 9 2010, 02:16 AM
|
|
Senior Member
618 posts Joined: Dec 2006 From: Metal Box Enterprise JB
|
QUOTE(ah_khoo @ Jul 8 2010, 04:43 PM) just asked my fren tried lastnite, tFAW = 30 gave instant reboot... it can boot , but become very unstable even i increase d Vcore nice freq on ram, clock wise can be slightly better? what will happen if > 260MHz on htt? instant reboot/bootable but fail in prime? now changinng to 9x 3x running wif 290mhz wif vcore 1.45v the freq of the ram lowered to 667mhz and oc until 872mhz wif the timing of 4-4-4-16-24 currently stable wif this setting will try to increase the clock again,  but duno got big differnce wif the previous one or not the maximum temp for the 3800 should be 69's is it? This post has been edited by blue16: Jul 9 2010, 02:17 AM |
|
|
Jul 9 2010, 02:16 AM
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(clon12 @ Jul 8 2010, 08:04 PM) divider or multiplier? I can't really get the full meaning of your sentence though haha, don't care is divider or multiplier, their result will be the same. |
|
|
Jul 9 2010, 10:36 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(saturn85 @ Jul 9 2010, 02:16 AM) haha, don't care is divider or multiplier, their result will be the same. i not sure what comment is this.. not helping any..multiplier often referred to cpu multiply to fsb.. to get cpu speed.. divider normally is for fsb:ram bus ratio.. let's think of this normal circumstances.. the ratio would be.. 1:2 where 200:400 200 = cpu fsb 400 = ram <-- this is where the ram can achieve 800mhz becoz of ddr u need to multiply to 2.. what if we raise the fsb to 290 by using that ratio (DIVIDER)? it can be.. (290 x 2)/1 = 580 thus 1160mhz.. can ur ram withstand this condition? so lower that ratio might HELP.. shall i calculate.. 200:333 what the hell is this.. how i calculate my ram if i were to raised my fsb.. 200:333 is equal to 3/5 how? 200/333 ~ 0.6 = 6/10 = 3/5 = 3:5 so if the fsb is 250 the ram speed would be (250 x 5)/3 = 417 ~ 833mhz.. and not only that.. u need to play with the voltage and the advance timings.. |
|
|
Jul 9 2010, 10:50 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
guys
A-Data With heat Sink DDR3-1600 - RM229 from cycom pricelist is what model eh? value line of A data or what? currently looking for ram.. but max budget is only RM320.. looking either 2gb kit or 2gb single stick.. what u all might recommend? kvr i pass.. |
|
|
Jul 9 2010, 10:52 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
why need that HP ram if expensive?
|
|
|
Jul 9 2010, 10:57 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(8tvt @ Jul 9 2010, 10:52 AM) why need that HP ram if expensive? since i asking in OC tered..that is y..kvr performance in quite known edi... wud like to try other ram.. must not be Hp only..but not KVR la..kekeke with limited budget, that is y im not aiming for any 4gb kit..kekeke.. » Click to show Spoiler - click again to hide... « |
|
|
Jul 9 2010, 11:13 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 9 2010, 10:57 AM) since i asking in OC tered..that is y.. Hahahaha like that meh? Like to collect same spec PC meh? Mau bukak CC ka? kvr performance in quite known edi... wud like to try other ram.. must not be Hp only..but not KVR la..kekeke with limited budget, that is y im not aiming for any 4gb kit..kekeke.. » Click to show Spoiler - click again to hide... « How about trying Gskill Value RAM, only RM164 = 2GB, last time bro 8tvt try oc can go up to 1600mhz no prob |
|
|
Jul 9 2010, 11:17 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
actually 1700mhz.. but not tighten it up..
i just thinking the high bandwidth ram in amd system is not helping much either.. more or less.. pay for a useless cause.. |
|
|
Jul 9 2010, 11:19 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 9 2010, 11:13 AM) Hahahaha like that meh? Like to collect same spec PC meh? Mau bukak CC ka? older PC gave to adek already.. (its a waste since he play Sims / Cs / RA and few other old games..How about trying Gskill Value RAM, only RM164 = 2GB, last time bro 8tvt try oc can go up to 1600mhz no prob and current PC will be assigned to torrent after this.. so i need another 1.. thinking of the money involve is not so much for those sempron..so ok la..that mobo also temporary only.. later if stable financially will upgrade.. how about team elite? gskill value what ramchip eh bro 8tvt? hope not relabeled. |
|
|
Jul 9 2010, 11:21 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
gskill not stated any.. i think relabeled.. just noticed D3 in the glance..
and again it's small chip.. might be good on temp also.. |
|
|
Jul 9 2010, 11:23 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(clon12 @ Jul 8 2010, 08:04 PM) divider or multiplier? I can't really get the full meaning of your sentence though meanin it's not necessary that d instability is caused by lack of vcore, it could be ram/nb freq or even temp issue. addin juice is just one of d options. but if u leave everything @ stock (meanin u only play w/ cpu multi), then it's pretty obvious that it's vcore/temp(if load temp is kinda high) related. That OLD stuff is somehow just 4 days old QUOTE(blue16 @ Jul 9 2010, 02:16 AM) it can boot , but become very unstable even i increase d Vcore windsy f2 aint really a clocker, i've tried few, most topped @ 2.5~2.6GHz only. u got a nice pair of ram there bro... now changinng to 9x 3x running wif 290mhz wif vcore 1.45v the freq of the ram lowered to 667mhz and oc until 872mhz wif the timing of 4-4-4-16-24 currently stable wif this setting will try to increase the clock again, but duno got big differnce wif the previous one or not the maximum temp for the 3800 should be 69's is it? http://s.lowyat.net/uploads//attach-21/pos...-1202649083.jpg QUOTE(saturn85 @ Jul 9 2010, 02:16 AM) haha, don't care is divider or multiplier, their result will be the same. it depends, if oc is just about pumpin multi & reducin divider, u'll missed out lotsa fun... This post has been edited by ah_khoo: Jul 9 2010, 11:25 AM |
|
|
Jul 9 2010, 11:28 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
OC is about FSB cranking man, not multiplier
|
|
|
Jul 9 2010, 11:35 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(shinjite @ Jul 9 2010, 11:28 AM) OC is about FSB cranking man, not multiplier Depends on what u wanna oc, i would say it's more of a mix with newer cpu's Sometimes playing with the FSB plus multi will get u better milage compared with just playing the multi or FSB alone |
|
|
Jul 9 2010, 11:49 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(cloudwan @ Jul 9 2010, 11:35 AM) Depends on what u wanna oc, i would say it's more of a mix with newer cpu's true.. every chips not equal..Sometimes playing with the FSB plus multi will get u better milage compared with just playing the multi or FSB alone |
|
|
Jul 9 2010, 11:55 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(8tvt @ Jul 9 2010, 10:36 AM) i not sure what comment is this.. not helping any.. sorry bro. multiplier often referred to cpu multiply to fsb.. to get cpu speed.. divider normally is for fsb:ram bus ratio.. let's think of this normal circumstances.. the ratio would be.. 1:2 where 200:400 200 = cpu fsb 400 = ram <-- this is where the ram can achieve 800mhz becoz of ddr u need to multiply to 2.. what if we raise the fsb to 290 by using that ratio (DIVIDER)? it can be.. (290 x 2)/1 = 580 thus 1160mhz.. can ur ram withstand this condition? so lower that ratio might HELP.. shall i calculate.. 200:333 what the hell is this.. how i calculate my ram if i were to raised my fsb.. 200:333 is equal to 3/5 how? 200/333 ~ 0.6 = 6/10 = 3/5 = 3:5 so if the fsb is 250 the ram speed would be (250 x 5)/3 = 417 ~ 833mhz.. and not only that.. u need to play with the voltage and the advance timings..  i just mean no need care about the motherboard is using multiplier concept or divider concept. although their implementation are different, but they will give same result. just like: base clock x dram multiplier = dram clock 200 x 2 = 400mhz base clock / dram divider = dram clock 200 / (1/2) = 400mhz and the multiplier or divider, usually will be in ratio form, that is: base clock : dram clock = 1:2 |
|
|
Jul 9 2010, 12:14 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(saturn85 @ Jul 9 2010, 11:55 AM) sorry bro. no offence.. i just mean no need care about the motherboard is using multiplier concept or divider concept. although their implementation are different, but they will give same result. just like: base clock x dram multiplier = dram clock 200 x 2 = 400mhz base clock / dram divider = dram clock 200 / (1/2) = 400mhz and the multiplier or divider, usually will be in ratio form, that is: base clock : dram clock = 1:2 i donno where u get that ram multiplier.. what about other ratio? i'm sure it's derived from the fsb:ram ratio.. it's actually 1:2 not just multiply by 2.. just that the answer is correct because it was divided by 1.. normally we refer the multiplier to the cpu.. |
|
|
Jul 9 2010, 12:24 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 9 2010, 11:28 AM) OC is about FSB cranking man, not multiplier this is so old skool bro... trend has changed now... QUOTE(cloudwan @ Jul 9 2010, 11:35 AM) Depends on what u wanna oc, i would say it's more of a mix with newer cpu's yalor... but easier for be chips w/ unlocked multi... those w/ locked multi have less options... especially when it comes to findin sweet spot for ram + clock speed + nb freq... not everbody as lucky as u bro... Sometimes playing with the FSB plus multi will get u better milage compared with just playing the multi or FSB alone  |
|
|
Jul 9 2010, 12:28 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 9 2010, 12:24 PM) this is so old skool bro... trend has changed now... Me lucky? If i'm lucky i would be using the X6 1090T already lor yalor... but easier for be chips w/ unlocked multi... those w/ locked multi have less options... especially when it comes to findin sweet spot for ram + clock speed + nb freq... not everbody as lucky as u bro... |
|
|
Jul 9 2010, 12:32 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(8tvt @ Jul 9 2010, 12:14 PM) no offence.. newer amd phenom architecture using dram multilplier.i donno where u get that ram multiplier.. what about other ratio? i'm sure it's derived from the fsb:ram ratio.. it's actually 1:2 not just multiply by 2.. just that the answer is correct because it was divided by 1.. normally we refer the multiplier to the cpu.. older amd athlon architecture using dram divider. |
|
|
Jul 9 2010, 12:37 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 9 2010, 10:57 AM) since i asking in OC tered..that is y.. i got a perfect solution for u bro, poison bro cloudwan to buy new performance ram, then ask him to sell u his kvr... voila... problem solved... kvr performance in quite known edi... wud like to try other ram.. must not be Hp only..but not KVR la..kekeke with limited budget, that is y im not aiming for any 4gb kit..kekeke.. » Click to show Spoiler - click again to hide... « if u insist on non kvr, here is a mild poison (team elite 1600) for u... » Click to show Spoiler - click again to hide... « Curry Sauce QUOTE(cloudwan @ Jul 9 2010, 12:28 PM) Me lucky? If i'm lucky i would be using the X6 1090T already lor :/cry: :/cry: :/sweat: 955be chip + my usin super laoya g1 4400+ & 690g oso consider myself very lucky ledi...  This post has been edited by ah_khoo: Jul 9 2010, 01:01 PM |
|
|
Jul 9 2010, 01:20 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(8tvt @ Jul 9 2010, 10:36 AM) i not sure what comment is this.. not helping any.. Oh kay..after seeing your post I have a feeling I should stop increasing my multiplier and thus stop oc..it seems that its not just about increasing multiplier and fbs....(: but 3.6ghz will do! multiplier often referred to cpu multiply to fsb.. to get cpu speed.. divider normally is for fsb:ram bus ratio.. let's think of this normal circumstances.. the ratio would be.. 1:2 where 200:400 200 = cpu fsb 400 = ram <-- this is where the ram can achieve 800mhz becoz of ddr u need to multiply to 2.. what if we raise the fsb to 290 by using that ratio (DIVIDER)? it can be.. (290 x 2)/1 = 580 thus 1160mhz.. can ur ram withstand this condition? so lower that ratio might HELP.. shall i calculate.. 200:333 what the hell is this.. how i calculate my ram if i were to raised my fsb.. 200:333 is equal to 3/5 how? 200/333 ~ 0.6 = 6/10 = 3/5 = 3:5 so if the fsb is 250 the ram speed would be (250 x 5)/3 = 417 ~ 833mhz.. and not only that.. u need to play with the voltage and the advance timings.. |
|
|
Jul 9 2010, 02:33 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
don't worry.. oc just for fun not a must..
just that learning in the correct way will yields better result.. after sometimes we know what to understand.. it takes times.. |
|
|
Jul 9 2010, 03:08 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Oc is not for fun and it is a must bro.
-pWs- |
|
|
Jul 9 2010, 03:18 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(saturn85 @ Jul 9 2010, 12:32 PM) newer amd phenom architecture using dram multilplier. some board have 1,2,3,4,5,6 or what ever should refer to..older amd athlon architecture using dram divider. 1- 400 (1:1) 2- 667 (3:5) 3- 800 (1:2) 4- 1066 (3:8) 5- 1333 (3:10) 6- 1600 (1:4) what ever it is... it's still came from that fraction.. 1- 1 2- 1.67 3- 2 4- 2.67 5- 3.33 6- 4 crazy jargon same like fsb and htt.. so just multiply that value with fsb will get the ram speed (don't forget to multiply by 2 for ddr) easier isn't it.. but lost the concept.. Added on July 9, 2010, 3:18 pm QUOTE(-pWs- @ Jul 9 2010, 03:08 PM) Oc is not for fun and it is a must bro. for u is the must X6.. if not i baling boom.. -pWs- This post has been edited by 8tvt: Jul 9 2010, 03:18 PM |
|
|
Jul 9 2010, 04:44 PM
|
|
Senior Member
618 posts Joined: Dec 2006 From: Metal Box Enterprise JB
|
QUOTE(ah_khoo @ Jul 9 2010, 11:23 AM) windsy f2 aint really a clocker, i've tried few, most topped @ 2.5~2.6GHz only. u got a nice pair of ram there bro... http://s.lowyat.net/uploads//attach-21/pos...-1202649083.jpg and too sad that i get F2 however i'm using 9x now for more OC i think can be + more mhz check this picture and give some advise please,sifus  |
|
|
Jul 9 2010, 04:49 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
is 9.5 cannot?
|
|
|
Jul 9 2010, 06:30 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
I'm aware that I may accidentally goreng my chip if I did something wrong...so I guess I will pass...at least for now
|
|
|
Jul 9 2010, 07:05 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(blue16 @ Jul 9 2010, 04:44 PM) thanks man, crucial blisti tracer is nice :/blush: d9s sure are nice stuff to play w/, 10th anni was d hit back then, few sifus here managed amazin freq @ cas4... salute2... and too sad that i get F2 :/blush: however i'm using 9x now for more OC :/drool: i think can be + more mhz :/) check this picture and give some advise please,sifus :/drool: :/drool: i see a dfi board there... ya nb temp seems a bit high, lemme guess... nvidia chipset? QUOTE(8tvt @ Jul 9 2010, 04:49 PM) is 9.5 cannot? i'm not so sure half multi still affects ram freq (run @ lower frequency than what bein show on cpu-z), but it has been a habit to avoid half multis since d gud old days of a64. QUOTE(clon12 @ Jul 9 2010, 06:30 PM) I'm aware that I may accidentally goreng my chip if I did something wrong...so I guess I will pass...at least for now consider yaself lucky to fry a chip w/ that kinda volt... amd chips can take massive amount of volt...  http://forum.lowyat.net/index.php?act=Atta...post&id=1302592 |
|
|
Jul 9 2010, 07:11 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(ah_khoo @ Jul 9 2010, 07:05 PM) i'm not so sure half multi still affects ram freq (run @ lower frequency than what bein show on cpu-z), but it has been a habit to avoid half multis since d gud old days of a64. i'm intended to make the cpu speed much higher.. though the ram speed with such timing already tighten up.. |
|
|
Jul 9 2010, 07:13 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(ah_khoo @ Jul 9 2010, 07:05 PM) consider yaself lucky to fry a chip w/ that kinda volt... I got scared after you said that let me burn my chip >< but i will oc it sooner or later..maybe next week? amd chips can take massive amount of volt... http://forum.lowyat.net/index.php?act=Atta...post&id=1302592 This post has been edited by clon12: Jul 9 2010, 07:14 PM |
|
|
Jul 9 2010, 07:29 PM
|
|
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan
|
QUOTE(blue16 @ Jul 9 2010, 04:44 PM) thanks man, crucial blisti tracer is nice beware with it.. degrade too fast |
|
|
Jul 9 2010, 11:20 PM
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
QUOTE(xixo_12 @ Jul 9 2010, 08:29 PM) beware with it.. Ram master do the talking~ degrade too fast Already jump into DDR3 dude? This post has been edited by verdict: Jul 9 2010, 11:21 PM |
|
|
Jul 10 2010, 03:25 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(8tvt @ Jul 9 2010, 03:18 PM) some board have 1,2,3,4,5,6 or what ever should refer to.. ya, its all about maths.1- 400 (1:1) 2- 667 (3:5) 3- 800 (1:2) 4- 1066 (3:8) 5- 1333 (3:10) 6- 1600 (1:4) what ever it is... it's still came from that fraction.. 1- 1 2- 1.67 3- 2 4- 2.67 5- 3.33 6- 4 crazy jargon same like fsb and htt.. so just multiply that value with fsb will get the ram speed (don't forget to multiply by 2 for ddr) easier isn't it.. but lost the concept.. but don't know motherboard implement multiplier logic circuit or divider logic circuit. |
|
|
Jul 10 2010, 05:20 AM
|
|
Senior Member
4,196 posts Joined: Oct 2007
|
its not that easy to degrade .
crucial ballistix tracer is nice but its hot cause of the LED . that's what people concern i guess . anyway, 1 thing i dislike bout AMD is that u cant OC by too much compared to the stock speed . but they give u high clock even at stock |
|
|
Jul 10 2010, 06:12 AM
|
|
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan
|
[quote=verdict,Jul 9 2010, 11:20 PM]
Ram master do the talking~ Already jump into DDR3 dude? i ain't master... no time to play comp nowadays.. no upgrade lor |
|
|
Jul 10 2010, 11:51 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Crucial Ballistix Tracers are good.....I suspect its the LED that causes its short lifespan ~_~
Its darn hot..... |
|
|
Jul 10 2010, 12:08 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 10 2010, 11:51 AM) Crucial Ballistix Tracers are good.....I suspect its the LED that causes its short lifespan ~_~ yalo, always heard about people say rma this ram.Its darn hot..... looks like adding led in ram is still not a good idea. |
|
|
Jul 10 2010, 12:59 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(monsh @ Jul 10 2010, 05:20 AM) anyway, 1 thing i dislike bout AMD is that u cant OC by too much compared to the stock speed . performance aside, it's just a sales gimmick by intel... but they give u high clock even at stock w/ new manufacturin process, u gonna see competitive clocks chunk out from amd chips... i'm pretty impressed by 125w thuban, things will only get better w/ 95w thuban & its predecessors. QUOTE(saturn85 @ Jul 10 2010, 12:08 PM) yalo, always heard about people say rma this ram. i'd say it's d implementation/design & chipset issue. d9 chips are voltage hungry, coupled w/ high temp & poor heat dissipation, there u go... short life span sticks... looks like adding led in ram is still not a good idea. |
|
|
Jul 10 2010, 01:11 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
With new manufacturing process nowadays, both Intel and AMD can clock at high speeds~~
Those were the days where AMD 3Ghz was like godlike to achieve haha For Intel, it was 4Ghz Now....both can easily do 4Ghz (performance aside, switched places) haha I think my WC setup not that optimised....stock speed 2.2Ghz at 1.1V, idle at 28c load at 38-39c. Any comments? |
|
|
Jul 10 2010, 01:18 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
led just use less voltage and no heat issue..
|
|
|
Jul 10 2010, 01:29 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 10 2010, 01:11 PM) With new manufacturing process nowadays, both Intel and AMD can clock at high speeds~~ hey, your cpu really cool. my one idle also 40c. Those were the days where AMD 3Ghz was like godlike to achieve haha For Intel, it was 4Ghz Now....both can easily do 4Ghz (performance aside, switched places) haha I think my WC setup not that optimised....stock speed 2.2Ghz at 1.1V, idle at 28c load at 38-39c. Any comments? |
|
|
Jul 10 2010, 01:40 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Even at stock speed and 1.1V?
|
|
|
Jul 10 2010, 03:11 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 10 2010, 01:40 PM) Even at stock speed and 1.1V? yes, now core speed at 2.2ghz, vcore at 1.104v, 40c idle.This post has been edited by saturn85: Jul 10 2010, 03:12 PM |
|
|
Jul 10 2010, 03:26 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
I see, thats a lot of difference
Currently me priming small ffts (heats up the CPU a lot more than blend) And also testing my Crucial Ballistix Tracer RAM, which just came back from RMA recently, running at DDR1066 at 2.1v (Its hot weh!!! although LED blink blink ler) My OCZ Reapers keep aside first Below is the screenshot Full loading at 40-41c (non aircond, freaking hot today ~_~) 
|
|
|
Jul 10 2010, 04:07 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 10 2010, 03:26 PM) I see, thats a lot of difference wao, you should have a good cpu cooler and good air flow casing.Currently me priming small ffts (heats up the CPU a lot more than blend) And also testing my Crucial Ballistix Tracer RAM, which just came back from RMA recently, running at DDR1066 at 2.1v (Its hot weh!!! although LED blink blink ler) My OCZ Reapers keep aside first Below is the screenshot Full loading at 40-41c (non aircond, freaking hot today ~_~)
|
|
|
Jul 10 2010, 04:55 PM
|
|
Senior Member
618 posts Joined: Dec 2006 From: Metal Box Enterprise JB
|
QUOTE(ah_khoo @ Jul 9 2010, 07:05 PM) d9s sure are nice stuff to play w/, 10th anni was d hit back then, few sifus here managed amazin freq @ cas4... salute2... yea, correct ,DFI board i see a dfi board there... ya nb temp seems a bit high, lemme guess... nvidia chipset? hmm i have a ques if i can boot into window but sometimes it will BS/hang/monitor showing nothing is it the Timing issue? Added on July 10, 2010, 5:00 pmbtw, how u know ur crucial ram's temp? This post has been edited by blue16: Jul 10 2010, 05:00 PM |
|
|
Jul 10 2010, 08:36 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(blue16 @ Jul 10 2010, 04:55 PM) btw, how u know ur crucial ram's temp? maybe crucial ram now got build in thermal sensor on it.http://www.lexar.com/newsroom/press/2010-June_02.html |
|
|
Jul 11 2010, 12:32 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(saturn85 @ Jul 10 2010, 04:07 PM) wao, you should have a good cpu cooler and good air flow casing. With tuniq tower CPU cooler, my idle also less tha 40c, around the 32-34c avg, full load around 50cNow I am running on liquid cooling |
|
|
Jul 11 2010, 12:36 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 11 2010, 12:32 AM) With tuniq tower CPU cooler, my idle also less tha 40c, around the 32-34c avg, full load around 50c wao, no wonder temperature so low on full load and without air cond. Now I am running on liquid cooling |
|
|
Jul 11 2010, 12:45 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
But got slight problem now....radiator has a small leak >_<"
Need to do replacement already |
|
|
Jul 11 2010, 01:28 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(shinjite @ Jul 11 2010, 12:45 AM) But got slight problem now....radiator has a small leak >_<" wao, should buy a better quality one, leakage is a headache problem.Need to do replacement already how much you bought your current liquid cooler? |
|
|
Jul 11 2010, 01:29 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Probably its my luck, got a defective radiator ~_~
Will get a 1 to 1 replacement |
|
|
Jul 11 2010, 03:35 PM
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
My 1055t only manage to push till 3472Mhz with FSB 248x14 multi.
Try 3.5GHz with FSB 250 but fail in Prime95 HT link 2232Mhz and NB 2232Mhz MB: Gigabyte 880GM-UD2H Ram Kingston valueram 1333MHz 2GB x2 My voltage all set to auto. any help? |
|
|
Jul 11 2010, 03:59 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kimurastanley @ Jul 11 2010, 03:35 PM) My 1055t only manage to push till 3472Mhz with FSB 248x14 multi. 3.4GHz is definitely too low for a thuban, it could be d ram that's limitin ya oc. try to use lower divider for ya ram. if possible, take out ya ram & check d chippies, diff chippies diff behavior. Try 3.5GHz with FSB 250 but fail in Prime95 HT link 2232Mhz and NB 2232Mhz MB: Gigabyte 880GM-UD2H Ram Kingston valueram 1333MHz 2GB x2 My voltage all set to auto. any help? it'd be more convenient if u can list down ya bios template, just d advanced setting will do, something like this: CODE CPU Level Up......................[Auto] OC Tuner Utility AI Overclock Tuner ..................[Manual] CPU Ratio............................[13.5] CPB Control..........................[Disabled] CPU Bus Frequency....................[300] PCIE Frequency.......................[100] DRAM Frequency.......................[1600MHz] CPU/NB Frequency.....................[3000] HT Link Speed........................[3000] > DRAM Timing Configuration > DRAM Driving Configuration ************* Please key in numbers directly! ************* Extreme OV...........................[Disabled] CPU & NB Voltage Mode................[Manual] CPU Voltage........................1.429 [1.400000] CPU/NB Voltage.....................1.442 [1.412500] CPU VDDA Voltage.....................2.560 [Auto] DRAM Voltage.........................1.700 [1.65000] HT Voltage...........................1.310 [1.27500] NB Voltage...........................1.310 [1.27500] NB 1.8V Voltage......................1.802 [Auto] SB Voltage...........................1.111 [Auto] VDDR Voltage.........................1.205 [Auto] VDDPCIE..............................1.113 [Auto] DRAM CTRL REF Voltage................0.500 [Auto] DRAM DATA REF Voltage................0.500 [Auto] ********************************************************** CPU Load-Line Calibration............[Auto] CPU/NB Load-Line Calibration.........[Auto] CPU Spread Spectrum..................[Disabled] PCIE Spread Spectrum.................[Disabled] DRAM Timing Configuration DRAM CAS# Latency....................7 [7 CLK] DRAM RAS# to CAS# Delay..............7 [7 CLK] DRAM RAS# PRE Time...................7 [7 CLK] DRAM RAS# ACT Time..................21 [21 CLK] DRAM READ to PRE Time................4 [Auto] DRAM Row Cycle Time.................28 [28 CLK] DRAM WRITE Recovery Time.............8 [Auto] DRAM RAS# to RAS# Delay..............4 [Auto] DRAM READ To WRITE Delay.............7 [Auto] DRAM WRITE To READ Delay(DD).........2 [Auto] DRAM WRITE To READ Delay(SD).........4 [Auto] DRAM WRITE To WRITE Timing...........4 [Auto] DRAM READ To READ Timing.............4 [Auto] DRAM REF Cycle Time................110 [Auto] DRAM Refresh Rate..................7.8 [Auto] DRAM Command Rate...................1T [Auto] DRAM Driving Configuration DCTO Information: CKE drive strength................1.5X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength...........1.5X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength.................1X [Auto] DQS drive strength..................1X [Auto] Processor ODT...................60ohms [Auto] DCTO Information: CKE drive strength................1.5X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength...........1.5X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength.................1X [Auto] DQS drive strength..................1X [Auto] Processor ODT...................60ohms [Auto] CPU Configuration AGESA Version 3.7.0.1 ---------------------------------------------------------- AMD Phenom(tm) II X6 1035T Processor Revision: E0 Cache L1: 768KB Cache L2: 3072KB Cache L3: 6MB Speed : 4063MHz uCode Patch Level: 0x10000BF ---------------------------------------------------------- Microcode Updation..................[Enabled] Secure Virtual Machine Mode.........[Enabled] Cool'n'Quite........................[Disabled] C1E Support.........................[Disabled] ASUS Core Unlocker..................[Disabled] CPU Core Activation.................[Manual] 2nd Core..........................[On] 3nd Core..........................[On] 4nd Core..........................[On] 5nd Core..........................[On] 6nd Core..........................[On] DRAM Controller Configuration ---------------------------------------------------------- Channel Interleaving................[Auto] MemClk Tristate C3/ATLVID...........[Disabled] Memory Hole Remapping...............[Enabled] DCT Unganged Mode...................[Always] Power Down Enable...................[Disabled] This post has been edited by ah_khoo: Jul 11 2010, 04:10 PM |
|
|
Jul 11 2010, 04:01 PM
|
 
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
QUOTE(kimurastanley @ Jul 11 2010, 03:35 PM) My 1055t only manage to push till 3472Mhz with FSB 248x14 multi. Probably your ram is running at very high speed...whats the divider for your ram? or do you left it at 1333/200HTT?Try 3.5GHz with FSB 250 but fail in Prime95 HT link 2232Mhz and NB 2232Mhz MB: Gigabyte 880GM-UD2H Ram Kingston valueram 1333MHz 2GB x2 My voltage all set to auto. any help? Added on July 11, 2010, 4:01 pm QUOTE(kimurastanley @ Jul 11 2010, 03:35 PM) My 1055t only manage to push till 3472Mhz with FSB 248x14 multi. Probably your ram is running at very high speed...whats the divider for your ram? or do you left it at 1333/200HTT?Try 3.5GHz with FSB 250 but fail in Prime95 HT link 2232Mhz and NB 2232Mhz MB: Gigabyte 880GM-UD2H Ram Kingston valueram 1333MHz 2GB x2 My voltage all set to auto. any help? This post has been edited by antonio: Jul 11 2010, 04:01 PM |
|
|
Jul 11 2010, 04:10 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(antonio @ Jul 11 2010, 04:01 PM) Probably your ram is running at very high speed...whats the divider for your ram? or do you left it at 1333/200HTT? My ram is running close to 1333Mhz, stock speedAdded on July 11, 2010, 4:01 pm Probably your ram is running at very high speed...whats the divider for your ram? or do you left it at 1333/200HTT? Added on July 11, 2010, 4:17 pm QUOTE(ah_khoo @ Jul 11 2010, 03:59 PM) » Click to show Spoiler - click again to hide... «  C1E, cool n quiet etc are all disabled Temperature wise around 58-60 degree C This post has been edited by kimurastanley: Jul 11 2010, 04:19 PM |
|
|
Jul 11 2010, 04:19 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
looks like temperature issue
can show us the core temp as well? ram stock timings are 9-9-9? try bumping vdimm to 1.65v This post has been edited by dafreak: Jul 11 2010, 04:22 PM |
|
|
Jul 11 2010, 04:20 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(dafreak @ Jul 11 2010, 04:19 PM) can show us bigger picture?...very small.. just noticed, change alreadyAdded on July 11, 2010, 4:24 pm QUOTE(dafreak @ Jul 11 2010, 04:19 PM) looks like temperature issue can show us the core temp as well? ram stock timings are 9-9-9? try bumping vdimm to 1.65v  This is the best i can get, once i increase to 250Mhz, then cant pass prime 95 Ya, stock timings are 9-9-9 This post has been edited by kimurastanley: Jul 11 2010, 04:25 PM |
|
|
Jul 11 2010, 04:31 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
stock cooler??
|
|
|
Jul 11 2010, 04:34 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(dafreak @ Jul 11 2010, 04:31 PM) stock cooler?? ya, stock cooler |
|
|
Jul 11 2010, 04:35 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
no wonder temps so high
i suggest you manually set vcore and change to a better cooler |
|
|
Jul 11 2010, 04:38 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(dafreak @ Jul 11 2010, 04:35 PM) no wonder temps so high Vcore is too high??i suggest you manually set vcore and change to a better cooler |
|
|
Jul 11 2010, 04:41 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kimurastanley @ Jul 11 2010, 04:38 PM) Vcore is too high?? u can run d chip @ ~4.0GHz w/ that kinda volt... |
|
|
Jul 11 2010, 04:46 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
My system crash jst nw..
Now i increase the Vdim to 1.65v abd Vcore set to 1.42V and will run stress test again. |
|
|
Jul 11 2010, 05:32 PM
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
Here is another 1055T OC result at default voltage
. Try to push into 4Ghz but not stable with 1.35v and it is very hot! like 65C++ » Click to show Spoiler - click again to hide... « |
|
|
Jul 11 2010, 06:17 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(InfiniteX @ Jul 11 2010, 05:32 PM) Here is another 1055T OC result at default voltage try to increase the voltage . Try to push into 4Ghz but not stable with 1.35v and it is very hot! like 65C++ » Click to show Spoiler - click again to hide... «  |
|
|
Jul 11 2010, 06:22 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(InfiniteX @ Jul 11 2010, 05:32 PM) Here is another 1055T OC result at default voltage it takes more than 1.35v for a decent chip to achieve 4GHz unless ya chip is a 95watter. my fren managed a 4.0GHz w/ 1.44v... . Try to push into 4Ghz but not stable with 1.35v and it is very hot! like 65C++ » Click to show Spoiler - click again to hide... « http://forum.lowyat.net/index.php?act=Atta...post&id=1658844 |
|
|
Jul 11 2010, 06:56 PM
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
QUOTE(ah_khoo @ Jul 11 2010, 06:22 PM) it takes more than 1.35v for a decent chip to achieve 4GHz unless ya chip is a 95watter. my fren managed a 4.0GHz w/ 1.44v... What is the critical tempeature for 1055T? http://forum.lowyat.net/index.php?act=Atta...post&id=1658844 ....Max Temps 62C according to AMD SPEC  !! then i should get better cooler to push it higher.....This post has been edited by InfiniteX: Jul 11 2010, 07:00 PM |
|
|
Jul 11 2010, 07:05 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
I check my Max FSB according to the guide on 1st page by increasing my FSB and decrease the multi
Guess what, my system crashes at 250MHz, FSB. My 1055T got problem?? This post has been edited by kimurastanley: Jul 11 2010, 07:06 PM |
|
|
Jul 11 2010, 07:16 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
it's the temperature....
|
|
|
Jul 11 2010, 07:21 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(dafreak @ Jul 11 2010, 07:16 PM) it's the temperature.... but i decrease the multi to make the clock speed as near as stock 2800Mhz. Temperature is around 50-53This post has been edited by kimurastanley: Jul 11 2010, 07:21 PM |
|
|
Jul 11 2010, 07:52 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
hey guys, i only now to stabilize OCing the black editions cpu(phenom II x4) by increasing the cpu-nb clock to a certain higer clock thru formula. how bot the HT link speed(default shud be at 2000Mhz), must i oso kacau this settings to achieve higher stable Overclock?
|
|
|
Jul 11 2010, 08:00 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
HT link should stay close to stock
|
|
|
Jul 11 2010, 09:16 PM
|
|
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
QUOTE(kimurastanley @ Jul 11 2010, 07:21 PM) but i decrease the multi to make the clock speed as near as stock 2800Mhz. Temperature is around 50-53 I always use temp +-10c when adding 0.1vso basically at stock the CPU would run a max of 58-62c while on stock volts ie. 1.375v so when i go bump it to 1.475v logically speaking an average of 70-82c would be the result...but then it would exceed the max thermal specification that AMD had put and as many AMD kaki would know, the higher the temp, the poorer the result of OC'ing... So to lower down the average max temp, a good aftermarket cooler would be recommended... |
|
|
Jul 11 2010, 09:24 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(kimurastanley @ Jul 11 2010, 07:05 PM) I check my Max FSB according to the guide on 1st page by increasing my FSB and decrease the multi maybe the HT link speed cause it. Guess what, my system crashes at 250MHz, FSB. My 1055T got problem?? what is your HT link speed? |
|
|
Jul 11 2010, 09:28 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(saturn85 @ Jul 11 2010, 09:24 PM) maybe the HT link speed cause it. HT link also around 2000MHz, i try to make HT link, NB, Ram clock as close to stock frequency, but it still crashes what is your HT link speed? |
|
|
Jul 11 2010, 09:32 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
why not try all over again? clear CMOS then OC 1 part at a time
btw,  sifu antonio |
|
|
Jul 11 2010, 09:32 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(kimurastanley @ Jul 11 2010, 09:28 PM) HT link also around 2000MHz, i try to make HT link, NB, Ram clock as close to stock frequency, but it still crashes try clear cmos and overclock again, see can help or not? |
|
|
Jul 11 2010, 09:36 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
so my situation is
Setup: CPU 250x11.5=2875MHz HT, NB~2000Mhz Ram ~1322MHz(Stock 1333) CPU T full load Max= 55 C Voltage all at default stock But system still crashes so that means the proc cant go more than 250MHz? |
|
|
Jul 11 2010, 09:48 PM
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 11 2010, 06:22 PM) it takes more than 1.35v for a decent chip to achieve 4GHz unless ya chip is a 95watter. my fren managed a 4.0GHz w/ 1.44v... Khoo Sir, you are here... Spotted.. http://forum.lowyat.net/index.php?act=Atta...post&id=1658844  |
|
|
Jul 11 2010, 09:50 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(kimurastanley @ Jul 11 2010, 09:36 PM) so my situation is maybe the kingston DDR3 1333 value ram prevent the base clock go further than 250mhz.Setup: CPU 250x11.5=2875MHz HT, NB~2000Mhz Ram ~1322MHz(Stock 1333) CPU T full load Max= 55 C Voltage all at default stock But system still crashes so that means the proc cant go more than 250MHz? i also have kingston DDR2 800 value ram that prevent my pc base clock go beyond 265mhz. |
|
|
Jul 11 2010, 09:58 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(saturn85 @ Jul 11 2010, 09:50 PM) maybe the kingston DDR3 1333 value ram prevent the base clock go further than 250mhz. u change ur ram then??i also have kingston DDR2 800 value ram that prevent my pc base clock go beyond 265mhz. |
|
|
Jul 11 2010, 09:59 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
New member here.. good day everyone..
Back to AMD camp, Here is my result for x6 1055t,   This 2 sticks of ram CMI  , waiting for new ram arrive. |
|
|
Jul 11 2010, 10:09 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(louislkw @ Jul 11 2010, 09:59 PM) New member here.. good day everyone.. nice, what is ur hardware configuration??Back to AMD camp, Here is my result for x6 1055t, This 2 sticks of ram CMI , waiting for new ram arrive. |
|
|
Jul 11 2010, 10:14 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(kimurastanley @ Jul 11 2010, 10:09 PM) nice, what is ur hardware configuration?? Hardware configuration? Set up is it?My Rig, CPU - AMD 1055t MB - Asus CHIV RAM - Patriot AMD Black Edition <-- thrash it and dump it, waiting G Skill Flare PC16000 7-9-7-24 Graphic Card - Sapphire HD5850 VX OC 850/1300 CPU is water-cooled by EK Supreme HF This post has been edited by louislkw: Jul 11 2010, 10:18 PM |
|
|
Jul 11 2010, 10:14 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
It is indeed quite strange to see that your processor cannot pass 250..
Why i sense the motherboard is holding back? Now lets see..Can tell me whether u are using IGP or Graphic card? What PSU u are using? And i suggest you set the vCore manually maybe at 1.35V..this volts enough to reach 3.7 at least..yours 1.45 too high already. |
|
|
Jul 11 2010, 10:17 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(AMDAthlon @ Jul 11 2010, 10:14 PM) It is indeed quite strange to see that your processor cannot pass 250.. My MB is Gigabyte 880GM-UD2HWhy i sense the motherboard is holding back? Now lets see..Can tell me whether u are using IGP or Graphic card? What PSU u are using? And i suggest you set the vCore manually maybe at 1.35V..this volts enough to reach 3.7 at least..yours 1.45 too high already. Using IGP now. Havent bought GC yet PSU Silverstone ST50F Thanks, I have set my Vcore to stock value edi Added on July 11, 2010, 10:18 pm QUOTE(louislkw @ Jul 11 2010, 10:14 PM) Hardware configuration? Set up is it? Yaya, setup This post has been edited by kimurastanley: Jul 11 2010, 10:18 PM |
|
|
Jul 11 2010, 10:27 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
Why everest showed different temperature between CPU and CPU #1, #2 etc??
My target temperature is less than 55 C, which one should i refer to??  |
|
|
Jul 11 2010, 10:36 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(kimurastanley @ Jul 11 2010, 10:27 PM) Why everest showed different temperature between CPU and CPU #1, #2 etc?? Always refer to CPU temperature instead of core temperature.My target temperature is less than 55 C, which one should i refer to?? 51 deg C quite high, under 100% load? This post has been edited by louislkw: Jul 11 2010, 10:37 PM |
|
|
Jul 11 2010, 10:44 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(kimurastanley @ Jul 11 2010, 09:58 PM) u change ur ram then?? haha, i didn't change la, just stop overclock la. |
|
|
Jul 11 2010, 11:18 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
i tested again.. My system only stable at 248MHz FSB. More than that will crash.. using integrated display now, but i wonder this will affect the OC
Any sifu can help.. my MB gt problem, or my proc?? |
|
|
Jul 11 2010, 11:27 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Yes..IGP really holding back the processor..i Suggest you LEND ur fren GC first and see if it really IGP culprit..but most of the time yes becos that processor is quite impossible to not reach 3.8Ghz..at least..
Or maybe you should buy aftermarket cooler . |
|
|
Jul 11 2010, 11:47 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(AMDAthlon @ Jul 11 2010, 11:27 PM) Yes..IGP really holding back the processor..i Suggest you LEND ur fren GC first and see if it really IGP culprit..but most of the time yes becos that processor is quite impossible to not reach 3.8Ghz..at least.. ok, i will try to install a GC and see how. Thx Or maybe you should buy aftermarket cooler . |
|
|
Jul 12 2010, 12:07 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
IGP really hold back the OC eh....
Means mine is lucky can hit 300Mhz HTT |
|
|
Jul 12 2010, 12:08 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
we all noe my proc max safe CPU volt under air colling would be 1.44-1.5v, but how bout the CPU NB max safe voltage? any1 noes? i dunwan to burn my mobo, currently stabilizing OC of 3.9Ghz with 1.3v CPU NB..
|
|
|
Jul 12 2010, 01:01 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(AMDAthlon @ Jul 11 2010, 11:27 PM) Yes..IGP really holding back the processor..i Suggest you LEND ur fren GC first and see if it really IGP culprit..but most of the time yes becos that processor is quite impossible to not reach 3.8Ghz..at least.. hey, is the IGP clock got relation with the base clock?Or maybe you should buy aftermarket cooler . |
|
|
Jul 12 2010, 01:21 AM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
ok, i try to install 7600GS and latest driver, result still the same..
crashes at FSB 250MHz.. decrease multi so that it run near 2800MHz, other settings are all changed near to stock value. CPU temperature always around 55, i dun think is temperature issue.. I dunno what happen to my rig, disappointed |
|
|
Jul 12 2010, 01:24 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kimurastanley @ Jul 11 2010, 11:47 PM) ok, i will try to install a GC and see how. Thx Learn to set the ur cpu volt and vdimm manually also, using auto is not a good thing to do coz they always put more volt than it really need Getting ur cpu up to 3.4ghz using stock HSF is already good for me, if u wanna push more please oh please invest on a better cooler A few guys in here already tested ocing when using IGP and all of them find that u will face some bottlenecking issue compared to when on a discret GPU, that may also be the reason Added on July 12, 2010, 1:26 am QUOTE(kimurastanley @ Jul 12 2010, 01:21 AM) ok, i try to install 7600GS and latest driver, result still the same.. Can u give a shot of ur casing internal? Maybe ur pwm's is screaming from lack of cooling from bad airflow crashes at FSB 250MHz.. decrease multi so that it run near 2800MHz, other settings are all changed near to stock value. CPU temperature always around 55, i dun think is temperature issue.. I dunno what happen to my rig, disappointed Added on July 12, 2010, 1:27 am QUOTE(louislkw @ Jul 11 2010, 10:14 PM) Hardware configuration? Set up is it? Oooo nice setup there bro, really jealous My Rig, CPU - AMD 1055t MB - Asus CHIV RAM - Patriot AMD Black Edition <-- thrash it and dump it, waiting G Skill Flare PC16000 7-9-7-24 Graphic Card - Sapphire HD5850 VX OC 850/1300 CPU is water-cooled by EK Supreme HF This post has been edited by cloudwan: Jul 12 2010, 01:27 AM |
|
|
Jul 12 2010, 01:28 AM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(cloudwan @ Jul 12 2010, 01:24 AM) Learn to set the ur cpu volt and vdimm manually also, using auto is not a good thing to do coz they always put more volt than it really need i will try a better cooler and see how, by the way, since the system crashes when the temperature is around 55 C, so u think better cooler will help??Getting ur cpu up to 3.4ghz using stock HSF is already good for me, if u wanna push more please oh please invest on a better cooler A few guys in here already tested ocing when using IGP and all of them find that u will face some bottlenecking issue compared to when on a discret GPU, that may also be the reason Added on July 12, 2010, 1:26 am Can u give a shot of ur casing internal? Maybe ur pwm's is screaming from lack of cooling from bad airflow |
|
|
Jul 12 2010, 01:29 AM
|
|
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
QUOTE(dafreak @ Jul 11 2010, 09:32 PM) why not try all over again? clear CMOS then OC 1 part at a time Thanks...had a lot of cakes and fizzy drinks today.... btw, sifu antonio QUOTE(kimurastanley @ Jul 11 2010, 09:36 PM) so my situation is Setup: CPU 250x11.5=2875MHz HT, NB~2000Mhz Ram ~1322MHz(Stock 1333) CPU T full load Max= 55 C Voltage all at default stock But system still crashes so that means the proc cant go more than 250MHz? QUOTE(cloudwan @ Jul 12 2010, 01:24 AM) Learn to set the ur cpu volt and vdimm manually also, using auto is not a good thing to do coz they always put more volt than it really need Aahh, so probably the IGP is working the Core Logic chip extra hard on your case....Getting ur cpu up to 3.4ghz using stock HSF is already good for me, if u wanna push more please oh please invest on a better cooler A few guys in here already tested ocing when using IGP and all of them find that u will face some bottlenecking issue compared to when on a discret GPU, that may also be the reason Manually set the voltages let you understand more on how varying voltages react during overclocking and the amount of heat raising through each and every hundreds of mhz you bring up to the CPU... Try and get the stock values for each components such as CPU, CPU-NB, Ram, Chipset, HTT and PCIE and then set them manually and start raising from 200 with ram running slower i.e: 1066 or 800mhz... drop down the CPU-NB also... |
|
|
Jul 12 2010, 01:34 AM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(cloudwan @ Jul 12 2010, 01:24 AM) Learn to set the ur cpu volt and vdimm manually also, using auto is not a good thing to do coz they always put more volt than it really need My casing internal viewGetting ur cpu up to 3.4ghz using stock HSF is already good for me, if u wanna push more please oh please invest on a better cooler A few guys in here already tested ocing when using IGP and all of them find that u will face some bottlenecking issue compared to when on a discret GPU, that may also be the reason Added on July 12, 2010, 1:26 am Can u give a shot of ur casing internal? Maybe ur pwm's is screaming from lack of cooling from bad airflow Added on July 12, 2010, 1:27 am Oooo nice setup there bro, really jealous The back fan not functioning bcs havent bought the adaptor to connect to power supply  Added on July 12, 2010, 1:42 am QUOTE(antonio @ Jul 12 2010, 01:29 AM) Thanks...had a lot of cakes and fizzy drinks today.... antonio, that's what i did to check the Max FSB Aahh, so probably the IGP is working the Core Logic chip extra hard on your case.... Manually set the voltages let you understand more on how varying voltages react during overclocking and the amount of heat raising through each and every hundreds of mhz you bring up to the CPU... Try and get the stock values for each components such as CPU, CPU-NB, Ram, Chipset, HTT and PCIE and then set them manually and start raising from 200 with ram running slower i.e: 1066 or 800mhz... drop down the CPU-NB also... Increase the FSB and decrease the multiplier so that the frequency close to 2800MHz CPU-NB, HTT and Ram all configured so that close to stock value Voltage vice i let it at stock value as I think adjustment wont be needed as all the values are close to stock value Ram wise I didnt start with lower value, i let it close to 1333Mhz System is stable until the FSB reaches 250Mhz, then errors occured when tested with prime 95 This post has been edited by kimurastanley: Jul 12 2010, 01:42 AM |
|
|
Jul 12 2010, 01:43 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kimurastanley @ Jul 12 2010, 01:34 AM) My casing internal view Naise HAF922 case u got there The back fan not functioning bcs havent bought the adaptor to connect to power supply » Click to show Spoiler - click again to hide... « Hmmm getting a better cooler helps eliminate the heat issue for ur cpu, software temp readings sometimes are not really accurate, like bro antonio said u need add a lil more as heat headroom also I really know that a 1055T can be push higher than what u getting coz i tested my friend's cpu just a few weeks ago.. To get to ur speed cpu volt around 1.3v is also enuff U may need to put some heatsinks on ur pwm's also just incase like what i did with my old Gigabyte MA770T-UD3P: » Click to show Spoiler - click again to hide... « This post has been edited by cloudwan: Jul 12 2010, 01:45 AM |
|
|
Jul 12 2010, 01:47 AM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(cloudwan @ Jul 12 2010, 01:43 AM) Naise HAF922 case u got there mind to let me know how to put the heatsinks?? where to buy?Hmmm getting a better cooler helps eliminate the heat issue for ur cpu, software temp readings sometimes are not really accurate, like bro antonio said u need add a lil more as heat headroom also I really know that a 1055T can be push higher than what u getting coz i tested my friend's cpu just a few weeks ago.. To get to ur speed cpu volt around 1.3v is also enuff U may need to put some heatsinks on ur pwm's also just incase like what i did with my old Gigabyte MA770T-UD3P: » Click to show Spoiler - click again to hide... « Noob question, what is pwm??? Any good cooler recommend?? This post has been edited by kimurastanley: Jul 12 2010, 01:49 AM |
|
|
Jul 12 2010, 07:12 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
wuts the safe NB volt(not CPU-NB volt) on air cooling on a air cooled system?
Added on July 12, 2010, 7:13 amon amd phenom II platform? This post has been edited by selferino: Jul 12 2010, 07:13 AM |
|
|
Jul 12 2010, 09:02 AM
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
QUOTE(cloudwan @ Jul 12 2010, 01:43 AM) Naise HAF922 case u got there Do i need to put heat sink to my PWM too? and i also notice the NB is quite hot....can't lay my fingure for more then 5secHmmm getting a better cooler helps eliminate the heat issue for ur cpu, software temp readings sometimes are not really accurate, like bro antonio said u need add a lil more as heat headroom also I really know that a 1055T can be push higher than what u getting coz i tested my friend's cpu just a few weeks ago.. To get to ur speed cpu volt around 1.3v is also enuff U may need to put some heatsinks on ur pwm's also just incase like what i did with my old Gigabyte MA770T-UD3P: » Click to show Spoiler - click again to hide... « |
|
|
Jul 12 2010, 09:12 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
my best OC so far, come2 comments, any bad or good or room of improvement( gonna try 4Gghz later 2nite, still can stabilize it , heard a legend u can increase the NB(not CPU NB) volt abit, but duno how much, takut anything happen, all i noe stock is at 1.1v, till now still getting blue screens...anyway check this oc out guys!
- Windows 7 Ultimate 64-bit - Phenom II 965 BE - CPU stepping : CACAC AC 09456PMW - Revision : RB-C3 - Max CPU clock speed : 3917.7 MHz (200.9*19.5) - CPU voltage : 1.472 V - Northbridge clock : 2800.0 MHz MHz @ 1.40 V - HTT link speed : 2009.1 MHz - HTT link voltage : stock voltage(shud be at 1.1v) - Motherboard used : GIGABYTE 870A-UD3 - Type of cooling : Tuniq Tower 120 Extreme(Air) 
|
|
|
Jul 12 2010, 11:02 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kimurastanley @ Jul 12 2010, 01:47 AM) mind to let me know how to put the heatsinks?? where to buy? Try looking for these small heatsinks to put on the mosfet's of ur pwm's, extreme oc will put quite a load on the mosfets and some cases it can go kaput also Noob question, what is pwm??? Any good cooler recommend?? » Click to show Spoiler - click again to hide... « This are the place where mobo pwm's are located: PWM's without heatsinks on usually cheap or mainstream mobo's » Click to show Spoiler - click again to hide... « PWM's with heatsinks on modrange mobo's » Click to show Spoiler - click again to hide... « QUOTE(selferino @ Jul 12 2010, 07:12 AM) wuts the safe NB volt(not CPU-NB volt) on air cooling on a air cooled system? If i'm not mistaken u should keep ur cpu-nb volt below 1.13v or is it 1.3v Added on July 12, 2010, 7:13 amon amd phenom II platform? I never played much with the NB volt becoz to me it has no much relevance in oc'ing a cpu.. QUOTE(InfiniteX @ Jul 12 2010, 09:02 AM) Do i need to put heat sink to my PWM too? and i also notice the NB is quite hot....can't lay my fingure for more then 5sec Some mobo's do not come with proper heatsinks on the mosfets of its pwm circuitry, used a few giga mobo almost all of their value mobo does not come with it If i'm not mistaken Gigabyte 870A-UD3 & 880G-UD2H does not come with also right? Last time i used Giga MA770T-UD3P i had to put sinks on my pwm's if not in some cases i could hear it screaming QUOTE(selferino @ Jul 12 2010, 09:12 AM) my best OC so far, come2 comments, any bad or good or room of improvement( gonna try 4Gghz later 2nite, still can stabilize it , heard a legend u can increase the NB(not CPU NB) volt abit, but duno how much, takut anything happen, all i noe stock is at 1.1v, till now still getting blue screens...anyway check this oc out guys! Hmmmm from my experience i don't see any difference in my oc when pumping more NB volt, to me it's better u play2 with the CPU-NB volt bcoz it's for the cpu IMC..- Windows 7 Ultimate 64-bit - Phenom II 965 BE - CPU stepping : CACAC AC 09456PMW - Revision : RB-C3 - Max CPU clock speed : 3917.7 MHz (200.9*19.5) - CPU voltage : 1.472 V - Northbridge clock : 2800.0 MHz MHz @ 1.40 V - HTT link speed : 2009.1 MHz - HTT link voltage : stock voltage(shud be at 1.1v) - Motherboard used : GIGABYTE 870A-UD3 - Type of cooling : Tuniq Tower 120 Extreme(Air)
What i experience is that by playing the CPU-NB volt u can actually decrease the amount of volt u need to pump into ur cpu volt.. |
|
|
Jul 12 2010, 11:13 AM
|
|
Junior Member
6 posts Joined: May 2009
|
can anyone teach me how to overclocking amd 7750BE 2.7ghzto go until 3.1ghz???it is posible to do that?? any side effect??
|
|
|
Jul 12 2010, 11:14 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
now cloudwan speaks like a true OCer..
Added on July 12, 2010, 11:14 am QUOTE(naughty_2208 @ Jul 12 2010, 11:13 AM) can anyone teach me how to overclocking amd 7750BE 2.7ghzto go until 3.1ghz???it is posible to do that?? any side effect?? i think u just need to pump the fsb..stock voltage also sufficient i guess.. This post has been edited by 8tvt: Jul 12 2010, 11:14 AM |
|
|
Jul 12 2010, 11:15 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
@antonio
ur birthday yesterday eh? tanjobi omedeto..kekekek. @cloudwan.. ur old gigabyte is my new gigabyte lol.. done stressing the ram pair.. just with the same timing with diff vdimm and freq.. not a total let down la.. later update result. » Click to show Spoiler - click again to hide... « 1.66vdimm... » Click to show Spoiler - click again to hide... « 1.68vdimm » Click to show Spoiler - click again to hide... « 1.7vdimm but fail..no time to tweak further.. later cont not so great.. subtiming all remains as SPD.. except few like twtr, read to read and few other i loosen up.. so far that is the best with my current noobish skill.. and also 700series mobo.. 1600mhz is nowhere to be reach even with cl10.. annoyed. p/s: tell me if image not clear..since using old CRT, i cant read..mybe u all can..kekeke This post has been edited by kuntawakaw: Jul 12 2010, 12:21 PM |
|
|
Jul 12 2010, 12:43 PM
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
QUOTE(kimurastanley @ Jul 11 2010, 11:18 PM) i tested again.. My system only stable at 248MHz FSB. More than that will crash.. using integrated display now, but i wonder this will affect the OC Kimu, I can 100% confirm it is the onboard GC holding back! i tested it with onboard GC and my system BSOD! Any sifu can help.. my MB gt problem, or my proc?? This post has been edited by InfiniteX: Jul 12 2010, 12:44 PM |
|
|
Jul 12 2010, 12:59 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(louislkw @ Jul 11 2010, 09:48 PM) Khoo Sir, you are here... Spotted.. :/hyper: woot... ur here bro... welcome to d amd family... QUOTE(antonio @ Jul 12 2010, 01:29 AM) Thanks...had a lot of cakes and fizzy drinks today.... :/clap: happy belated birhtday sir , hardly check d thread yesterday coz busy w/ babysittin... QUOTE(8tvt @ Jul 12 2010, 11:14 AM) now cloudwan speaks like a true OCer.. he has been d most low profile otai for quite sometimes ledi bro. QUOTE(kuntawakaw @ Jul 12 2010, 11:15 AM) done stressing the ram pair.. just with the same timing with diff vdimm and freq.. not a total let down la.. later update result. woot kunta, what sticks or those... edited: team elite 1333, hmm... considered quite gud ledi, 1600 is more powah coz better chippies iirc... This post has been edited by ah_khoo: Jul 12 2010, 01:01 PM |
|
|
Jul 12 2010, 01:13 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(InfiniteX @ Jul 12 2010, 12:43 PM) Kimu, I can 100% confirm it is the onboard GC holding back! i tested it with onboard GC and my system BSOD! Hi, i have sorted out my problem.So I tried again by setting my ram running at 1000MHz, and it works!!! I can run my CPU at 255MHz now, will try to push it higher later, running Prime 95 for bout 1 hour now and no problem. Last time system will crash after about 10 mins Thank you for all sifus for giving me advices |
|
|
Jul 12 2010, 01:41 PM
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
QUOTE(kimurastanley @ Jul 12 2010, 01:13 PM) Hi, i have sorted out my problem. now, are u using add-on GC or change cooling fan?So I tried again by setting my ram running at 1000MHz, and it works!!! I can run my CPU at 255MHz now, will try to push it higher later, running Prime 95 for bout 1 hour now and no problem. Last time system will crash after about 10 mins Thank you for all sifus for giving me advices |
|
|
Jul 12 2010, 01:58 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(InfiniteX @ Jul 12 2010, 01:41 PM) now, are u using add-on GC or change cooling fan? still internal graphic, stock cooler, will buy later.i just change the FSB, CPU clock still 2800MHz as i lower down the multiplier as i only want to check the FSB than i can run |
|
|
Jul 12 2010, 02:06 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Thats it..
Still IGP still the one causing it..Becos RAM Clock are not suppose to run lower than it should.. Have you set it Manually instead of Auto(All settings)? Temperature really play part on systems.Last time my pwm no heatsinks bang play game sure restart(too hot )..Now ok jor put heatsinks + lower the volt NB Volt..i dont know what to use it..i just keep it below 1.15V..Maybe it is useful for IGP overclocking perhaps? CPU-NB Vid is suggested <1.4V.. |
|
|
Jul 12 2010, 02:14 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(AMDAthlon @ Jul 12 2010, 02:06 PM) Thats it.. I tried 7600GS, but system still crashes when FSB increases.. Only by lowering down the Ram speed, then it wont crash.Still IGP still the one causing it..Becos RAM Clock are not suppose to run lower than it should.. Have you set it Manually instead of Auto(All settings)? Temperature really play part on systems.Last time my pwm no heatsinks bang play game sure restart(too hot )..Now ok jor put heatsinks + lower the volt NB Volt..i dont know what to use it..i just keep it below 1.15V..Maybe it is useful for IGP overclocking perhaps? CPU-NB Vid is suggested <1.4V.. |
|
|
Jul 12 2010, 02:36 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kimurastanley @ Jul 12 2010, 02:14 PM) I tried 7600GS, but system still crashes when FSB increases.. Only by lowering down the Ram speed, then it wont crash. What is ur NB speed? Have u tried keeping it as close to 2000mhz? If u oc the NB@CPU IMC did u try uping the cpu-nb volt to maybe 1.25v? Even tho not ocing ur ram have u tried setting its vdimm to maybe 1.65v? I notice that when we oc our cpu even tho we don't oc ur ram it helps if we supply extra volt to the ram to keep it stable.. |
|
|
Jul 12 2010, 02:45 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(cloudwan @ Jul 12 2010, 02:36 PM) What is ur NB speed? Have u tried keeping it as close to 2000mhz? If u oc the NB@CPU IMC did u try uping the cpu-nb volt to maybe 1.25v? NB speed i keep it close to 2000Mhz,i tried to set the Vdimm to 1.65v before but it failed too. I also increase the CPU-NB by +0.1-0.2V also crash.Even tho not ocing ur ram have u tried setting its vdimm to maybe 1.65v? I notice that when we oc our cpu even tho we don't oc ur ram it helps if we supply extra volt to the ram to keep it stable.. |
|
|
Jul 12 2010, 02:46 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 12 2010, 12:59 PM) woot... ur here bro... welcome to d amd family... Its rock! Added on July 12, 2010, 2:59 pm QUOTE(kimurastanley @ Jul 12 2010, 02:45 PM) NB speed i keep it close to 2000Mhz,i tried to set the Vdimm to 1.65v before but it failed too. I also increase the CPU-NB by +0.1-0.2V also crash. What is your target core speed?Most chips are acheivable at 3500 MHz core speed without increase in Vcore. Using original heat sink can acheived 3710Mhz core speed with 1.3875vcore and keep the temperature below 60 deg C in an air con enviroment. What is your setting in bios? This post has been edited by louislkw: Jul 12 2010, 02:59 PM |
|
|
Jul 12 2010, 03:05 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kimurastanley @ Jul 12 2010, 02:45 PM) NB speed i keep it close to 2000Mhz,i tried to set the Vdimm to 1.65v before but it failed too. I also increase the CPU-NB by +0.1-0.2V also crash. Have u tried updating the bios? Last time when i was using my old Gigabyte certain bios rev does help oc.. |
|
|
Jul 12 2010, 03:07 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(cloudwan @ Jul 12 2010, 03:05 PM) Have u tried updating the bios? Last time when i was using my old Gigabyte certain bios rev does help oc.. ya, I have updated to latest bios.will try to increase Vdimm gradually at stock speed (1333MHz) and test the stability Added on July 12, 2010, 5:41 pmUpdate: I tried to adjust the timing of my Ram close to stock speed, at last my proc can adjusted more than 3500MHz after timing adjustment This post has been edited by kimurastanley: Jul 12 2010, 05:41 PM |
|
|
Jul 12 2010, 05:51 PM
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
hm.....so it is memory timing problem?
This post has been edited by InfiniteX: Jul 12 2010, 05:54 PM |
|
|
Jul 12 2010, 06:07 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kimurastanley @ Jul 12 2010, 03:07 PM) ya, I have updated to latest bios. What ram are u using btw? Regular Kingston KVR? will try to increase Vdimm gradually at stock speed (1333MHz) and test the stability Added on July 12, 2010, 5:41 pmUpdate: I tried to adjust the timing of my Ram close to stock speed, at last my proc can adjusted more than 3500MHz after timing adjustment When trying to see what's the highest HT@FSB ur mobo can go it is good to let the ram timings at a lax timing so that u can easily pinpoint the reasons of any instabilities My KVR with elpida chips so far i was able to take it to around 14xxmhz at a lax timing of 24-8-8-8, what timings are u running urs? |
|
|
Jul 12 2010, 06:08 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(InfiniteX @ Jul 12 2010, 05:51 PM) hm.....so it is memory timing problem? ya, so far my system is stable under stress test |
|
|
Jul 12 2010, 06:08 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Thats why i told you you have to set all of it Manually as if set to Auto it just set like no one issue.. - -
|
|
|
Jul 12 2010, 08:32 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
QUOTE(cloudwan @ Jul 12 2010, 06:07 PM) What ram are u using btw? Regular Kingston KVR? Ya, kingston value ram.. now it runs at 22-8-8-8 stablelyWhen trying to see what's the highest HT@FSB ur mobo can go it is good to let the ram timings at a lax timing so that u can easily pinpoint the reasons of any instabilities My KVR with elpida chips so far i was able to take it to around 14xxmhz at a lax timing of 24-8-8-8, what timings are u running urs? Added on July 12, 2010, 8:32 pm QUOTE(AMDAthlon @ Jul 12 2010, 06:08 PM) Thats why i told you you have to set all of it Manually as if set to Auto it just set like no one issue.. - - ya, true..that solve my problem This post has been edited by kimurastanley: Jul 12 2010, 08:32 PM |
|
|
Jul 13 2010, 11:04 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 12 2010, 12:59 PM) woot kunta, what sticks or those... this pair is really pocket frenly.. rm290 total.. even KVR selling at 150++ and i know tweaking KVR will be sucks..edited: team elite 1333, hmm... considered quite gud ledi, 1600 is more powah coz better chippies iirc... 1600mhz not sighted anywhere.. Sg selling how much there unker? mebbe i settle with these rams only... with my current salary, i might have stop OC.. |
|
|
Jul 13 2010, 11:11 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 13 2010, 11:04 AM) this pair is really pocket frenly.. rm290 total.. even KVR selling at 150++ and i know tweaking KVR will be sucks.. RM290 is a steal for a pair of ram which capable of ~15xx @ 7-8-7... 1600mhz not sighted anywhere.. Sg selling how much there unker? mebbe i settle with these rams only... with my current salary, i might have stop OC.. dun mentioned bout price in sg, almost everything is pricier than mesia ALOT... specially ahsos boards...  1600 goin @ $159 promo price, imagine if normal price... w/ my current piles of debt, i'm considered dead lucky to have a x2 4400+ & 690g... |
|
|
Jul 13 2010, 11:22 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 13 2010, 11:11 AM) RM290 is a steal for a pair of ram which capable of ~15xx @ 7-8-7... considering the average wage over there is far higher compared to here, that 159$ is ok right.. dun mentioned bout price in sg, almost everything is pricier than mesia ALOT... specially ahsos boards... 1600 goin @ $159 promo price, imagine if normal price... w/ my current piles of debt, i'm considered dead lucky to have a x2 4400+ & 690g... these module kindda hot.. near to tracer.. so i afraid to put more vdimm..last time 1.8v still not sked.. now only limit myself for 1.7v.. later need hang fan there and push further..i hope can la. |
|
|
Jul 13 2010, 11:23 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 13 2010, 11:04 AM) this pair is really pocket frenly.. rm290 total.. even KVR selling at 150++ and i know tweaking KVR will be sucks.. 1600mhz not sighted anywhere.. Sg selling how much there unker? mebbe i settle with these rams only... with my current salary, i might have stop OC.. QUOTE(ah_khoo @ Jul 13 2010, 11:11 AM) RM290 is a steal for a pair of ram which capable of ~15xx @ 7-8-7... Huhuhuhu, same here, with the amount of debt i'm collecting, its lucky that i'm able to use my KVR at all.. dun mentioned bout price in sg, almost everything is pricier than mesia ALOT... specially ahsos boards... 1600 goin @ $159 promo price, imagine if normal price... w/ my current piles of debt, i'm considered dead lucky to have a x2 4400+ & 690g... Wish i can play2 with new value rams like Gskill or Team elite like kunta is playing |
|
|
Jul 13 2010, 11:25 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 13 2010, 11:22 AM) considering the average wage over there is far higher compared to here, that 159$ is ok right.. Kasi gantung satu kipas 60mm atas ram lah bro these module kindda hot.. near to tracer.. so i afraid to put more vdimm..last time 1.8v still not sked.. now only limit myself for 1.7v.. later need hang fan there and push further..i hope can la. |
|
|
Jul 13 2010, 11:34 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 13 2010, 11:22 AM) considering the average wage over there is far higher compared to here, that 159$ is ok right.. my pay only < $2500, minus cpf minus payin debts minus bills, i only got $3xx for d whole month, if i buy some more i dont need to eat for half month ledi... even if i can starve for half month, i still can't use d elite 1600 on my 690g, can i? these module kindda hot.. near to tracer.. so i afraid to put more vdimm..last time 1.8v still not sked.. now only limit myself for 1.7v.. later need hang fan there and push further..i hope can la. QUOTE(cloudwan @ Jul 13 2010, 11:23 AM) Huhuhuhu, same here, with the amount of debt i'm collecting, its lucky that i'm able to use my KVR at all.. ekkkk... it depends on how bad u want d item bro, if u really want it badly, u still can squeeze out d $$$ from somewhere... Wish i can play2 with new value rams like Gskill or Team elite like kunta is playing QUOTE(cloudwan @ Jul 13 2010, 11:25 AM) Kasi gantung satu kipas 60mm atas ram lah bro senang aje, kalu panas, tuangkan air... hilanglah kepanasan... This post has been edited by ah_khoo: Jul 13 2010, 11:42 AM |
|
|
Jul 13 2010, 11:47 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
I've tested my RMAed ballistix tracer DDR2 PC-6400
Not bad the chips, can run DDR1066 at 2.1v but its freaking hot..... I think too hot until Windows suddenly hang hahaha Definitely need a blowing fan on top of it. Screw the LEDs man, make it generate more heat only |
|
|
Jul 13 2010, 11:52 AM
|
|
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
QUOTE(shinjite @ Jul 13 2010, 11:47 AM) I've tested my RMAed ballistix tracer DDR2 PC-6400 Micron D9s that runs at >2.1v is advisable to put fan on top of the modules to help cool the ram operating temp and increase lifespan Not bad the chips, can run DDR1066 at 2.1v but its freaking hot..... I think too hot until Windows suddenly hang hahaha Definitely need a blowing fan on top of it. Screw the LEDs man, make it generate more heat only |
|
|
Jul 13 2010, 11:55 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(shinjite @ Jul 13 2010, 11:47 AM) I've tested my RMAed ballistix tracer DDR2 PC-6400 As an ex-user of those bling2 Crucial Ballistix Tracers i can vouch for their performance, n i just love the black on bling2 look of the ram's..Not bad the chips, can run DDR1066 at 2.1v but its freaking hot..... I think too hot until Windows suddenly hang hahaha Definitely need a blowing fan on top of it. Screw the LEDs man, make it generate more heat only Tho never run them at 1066mhz speed tho only 1000mhz at 2.0v When i move to DDR3 wish to get their new bling-bling DDR3 too but alas no budget their value line plak looks like no one is bringing them in |
|
|
Jul 13 2010, 11:55 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 13 2010, 11:25 AM) Kasi gantung satu kipas 60mm atas ram lah bro 80mm fan ngam2 can be hanged using the mobo/ casing hole.. need to find some bling2 fan 1st..kekeke..all left is black fan only QUOTE(ah_khoo @ Jul 13 2010, 11:34 AM) senang aje, kalu panas, tuangkan air... hilanglah kepanasan... i rather dip em.. more efficient..kekkekeQUOTE(shinjite @ Jul 13 2010, 11:47 AM) I've tested my RMAed ballistix tracer DDR2 PC-6400 u know how hot it is...my team elite is abit lower only..so afraid to push moreNot bad the chips, can run DDR1066 at 2.1v but its freaking hot..... I think too hot until Windows suddenly hang hahaha Definitely need a blowing fan on top of it. Screw the LEDs man, make it generate more heat only btw i think that tracer able to run 1066mhz cl5 / 800mhz cl4 with 1.9vdimm perfectly fine.. i strongly think la..mebbe ur ram cannot.. Added on July 13, 2010, 12:00 pm QUOTE(cloudwan @ Jul 13 2010, 11:55 AM) As an ex-user of those bling2 Crucial Ballistix Tracers i can vouch for their performance, n i just love the black on bling2 look of the ram's.. yeah..that ram kindda suck is want to "OC" it.. i think last time max i can go is around 1020mhz...but not using 1066 divider..Tho never run them at 1066mhz speed tho only 1000mhz at 2.0v When i move to DDR3 wish to get their new bling-bling DDR3 too but alas no budget their value line plak looks like no one is bringing them in if using 1066 divider, kacang2 can do 1066mhz.. no alter anything else.. kalau saya tidak silap, saya ada run 4sticks 1066mhz..kalau xsilap la.. This post has been edited by kuntawakaw: Jul 13 2010, 12:00 PM |
|
|
Jul 13 2010, 12:06 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
u all org kaye2, i was usin twinmos value only back then...
This post has been edited by ah_khoo: Jul 13 2010, 12:19 PM |
|
|
Jul 13 2010, 12:29 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 13 2010, 12:06 PM) u all org kaye2, i was usin twinmos value only back then... Don't say like that bro, itu twinmos ram is a special case, performance wise it blows our bling2 ram to kingdom come |
|
|
Jul 13 2010, 12:41 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(kuntawakaw @ Jul 13 2010, 11:55 AM) btw i think that tracer able to run 1066mhz cl5 / 800mhz cl4 with 1.9vdimm perfectly fine.. Haven't try 1.9V with iti strongly think la..mebbe ur ram cannot.. But 800mhz 4-4-4-12 rated at 2.0v Anyway, I've ditch it off and put back my OCZ Reapers, 1066Mhz with 2.1v no problems. Just warm to the touch |
|
|
Jul 13 2010, 12:53 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 13 2010, 12:29 PM) Don't say like that bro, itu twinmos ram is a special case, performance wise it blows our bling2 ram to kingdom come i think i was just bein lucky bro... couldn't believe i sold it for a mere RM150 only... should have kept it instead... QUOTE(shinjite @ Jul 13 2010, 12:41 PM) Haven't try 1.9V with it had a short spell w/ reaper 800 too, quite ok to my book... But 800mhz 4-4-4-12 rated at 2.0v Anyway, I've ditch it off and put back my OCZ Reapers, 1066Mhz with 2.1v no problems. Just warm to the touch http://forum.lowyat.net/index.php?act=Atta...post&id=1059693 |
|
|
Jul 13 2010, 12:56 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Yeah the reapers are ok and its quite cool~~
Me running the Tracers at 2.1v 1066Mhz, around 30 minutes then Windows freezes (definitely due to the RAMs),its too hot to the touch seriously. If drop to 2.0v, it can't boot into Windows, hangs at the loading part ~_~ OCZ Reapers 24/7 also no problems at 1066Mhz 2.1v |
|
|
Jul 14 2010, 08:55 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
guys, having troble here! im using windows 7 64 bit, my rig as in the siggy below, OCing my proc, this is the max i can go
http://s.lowyat.net/uploads//attach-14/pos...-1278896517.jpg http://forum.lowyat.net/topic/1003744/+240#entry34907871 http://valid.canardpc.com/show_oc.php?id=1290656 but i still cant stabilize 4GHz of OC, tried CPU-NB voltage of 1.45v, cpu voltage at 1.52, even NB volt i pump to 1.20v, still cant get it stabilize during priming, tried every combo at a very high voltage(all combo except HT link speed n voltage and also the HTT coz im using BE proc). im using c3 revision proc, so i dun think my proc just can go an more higher, izzit because of the windows im using(64-bit) ? btw my mobo bios setting has a very weird HT link setting, it only offer me to tweak the speed(400MHz - 2.6 GHZ), no option to tweak the 200Mhz default HT link, and also no option to increase of decrease the HT link voltage. This post has been edited by selferino: Jul 14 2010, 08:58 AM |
|
|
Jul 14 2010, 10:38 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(selferino @ Jul 14 2010, 08:55 AM) guys, having troble here! im using windows 7 64 bit, my rig as in the siggy below, OCing my proc, this is the max i can go u forgot one thing, temperature. what's d load temp @ 4GHz? what's ya nb freq? u don't need 1.45v for < 2.6k, especially for c3 chips. bear in mind that higher imc volt will contribute to higher cpu temp. nb volt @ 1.2v is fine thou. sometimes, in order to be prime stable at certain clock, u need lower temp in order for d setup to be able to pass prime test. http://s.lowyat.net/uploads//attach-14/pos...-1278896517.jpg http://forum.lowyat.net/topic/1003744/+240#entry34907871 http://valid.canardpc.com/show_oc.php?id=1290656 but i still cant stabilize 4GHz of OC, tried CPU-NB voltage of 1.45v, cpu voltage at 1.52, even NB volt i pump to 1.20v, still cant get it stabilize during priming, tried every combo at a very high voltage(all combo except HT link speed n voltage and also the HTT coz im using BE proc). im using c3 revision proc, so i dun think my proc just can go an more higher, izzit because of the windows im using(64-bit) ? btw my mobo bios setting has a very weird HT link setting, it only offer me to tweak the speed(400MHz - 2.6 GHZ), no option to tweak the 200Mhz default HT link, and also no option to increase of decrease the HT link voltage. correct me if i'm wrong, for ya bios, ht link @ 400MHz = ht link multi @ 2x, 600MHz @ 3x... and so on... |
|
|
Jul 14 2010, 11:07 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(shinjite @ Jul 13 2010, 12:41 PM) Haven't try 1.9V with it so ka?But 800mhz 4-4-4-12 rated at 2.0v Anyway, I've ditch it off and put back my OCZ Reapers, 1066Mhz with 2.1v no problems. Just warm to the touch when my tracer was used, it was active cooled.. so running 1066mhz all the time so never have issue of freeze because of heat. (and im pretty sure it was with 1.9v only..) at that time.. i was noober then now..so my SS all sucks.. some SS just show CPUZ main tab only.. some memory only..so donno which one tracers SS..only have SS with 4sticks prime fail.. kekeke 
Added on July 14, 2010, 11:09 am QUOTE(ah_khoo @ Jul 13 2010, 12:53 PM) i think i was just bein lucky bro... couldn't believe i sold it for a mere RM150 only... should have kept it instead... + heatspreader also right?kkekekeke This post has been edited by kuntawakaw: Jul 14 2010, 11:09 AM |
|
|
Jul 14 2010, 11:58 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(kuntawakaw @ Jul 14 2010, 11:07 AM) so ka? With active cooling sure ler no problems~~when my tracer was used, it was active cooled.. so running 1066mhz all the time so never have issue of freeze because of heat. (and im pretty sure it was with 1.9v only..) at that time.. i was noober then now..so my SS all sucks.. some SS just show CPUZ main tab only.. some memory only..so donno which one tracers SS..only have SS with 4sticks prime fail.. kekeke
Added on July 14, 2010, 11:09 am + heatspreader also right?kkekekeke Mine was passive~~ The thing is it was too hot being passive~~ The reapers had no problem running 2.1v on passive, just warm to the touch |
|
|
Jul 14 2010, 01:22 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
this is what i managed on a 4gb pair tracer, they weren't actively cooled but kinda warm during stress. gotten this pair for less than a week iirc so doesn't have much time to test... mileage wise reaper is definitely better...
http://forum.lowyat.net/index.php?act=Atta...=post&id=780215 This post has been edited by ah_khoo: Jul 14 2010, 01:24 PM |
|
|
Jul 14 2010, 02:19 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Tracer definitely still can go higher
|
|
|
Jul 14 2010, 02:50 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 14 2010, 02:19 PM) Tracer definitely still can go higher yup, but voltage is a concern there bro, epsecially if they're not actively cooled. |
|
|
Jul 14 2010, 03:09 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 14 2010, 02:50 PM) yup, but voltage is a concern there bro, epsecially if they're not actively cooled. Hmmm still not sure if the newer DDR3 tracers are also like that |
|
|
Jul 14 2010, 03:10 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
The non LED ones are okay
Just the LED 1s are the 1s to look out for Definitely need active cooling ah_khoo, that time you run it at 2V or 2.1V? |
|
|
Jul 14 2010, 03:28 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 14 2010, 03:09 PM) Hmmm still not sure if the newer DDR3 tracers are also like that dunno bro, but i think not as hot as newer manufacturing process will lead to less heat & volt required. u can actually direct order from d states if u have some connections there. QUOTE(shinjite @ Jul 14 2010, 03:10 PM) The non LED ones are okay as per ss, 510 @ cas5 w/ 1.87v. Just the LED 1s are the 1s to look out for Definitely need active cooling ah_khoo, that time you run it at 2V or 2.1V? This post has been edited by ah_khoo: Jul 14 2010, 05:12 PM |
|
|
Jul 14 2010, 05:02 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Oh....1.9V is still okay~~
This post has been edited by shinjite: Jul 14 2010, 05:02 PM |
|
|
Jul 15 2010, 12:51 AM
|
Senior Member
4,337 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
gila u guys ram oc up to 2.1v, whats wrong with 1.65v?
what is the safe ram v for Malaysias warm temperature? |
|
|
Jul 15 2010, 01:05 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(Mr_47 @ Jul 15 2010, 12:51 AM) gila u guys ram oc up to 2.1v, whats wrong with 1.65v? Hahahaha, they were talking about DDR2 lah bro, its different from DDR3 what is the safe ram v for Malaysias warm temperature? For DDR2 1.8~1.9v is normal.. Beside AMD chippies have no prob in high ram volt like inhell i series |
|
|
Jul 15 2010, 01:29 AM
|
|
Senior Member
4,337 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(cloudwan @ Jul 15 2010, 01:05 AM) Hahahaha, they were talking about DDR2 lah bro, its different from DDR3 so whats the max with ddr 3..... especially 1600 ?For DDR2 1.8~1.9v is normal.. Beside AMD chippies have no prob in high ram volt like inhell i series |
|
|
Jul 15 2010, 02:24 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(Mr_47 @ Jul 15 2010, 01:29 AM) so whats the max with ddr 3..... especially 1600 ? if the ram is for intel core i3, i5, i7 series cpu, usually is 1.65v one.for amd system, i see got 1.8v one. This post has been edited by saturn85: Jul 15 2010, 02:31 AM |
|
|
Jul 15 2010, 02:50 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(ah_khoo @ Jul 14 2010, 10:38 AM) u forgot one thing, temperature. what's d load temp @ 4GHz? what's ya nb freq? u don't need 1.45v for < 2.6k, especially for c3 chips. bear in mind that higher imc volt will contribute to higher cpu temp. nb volt @ 1.2v is fine thou. sometimes, in order to be prime stable at certain clock, u need lower temp in order for d setup to be able to pass prime test. 4ghz temps max load is like around 65 C, izzit not stable bcoz of the temps? correct me if i'm wrong, for ya bios, ht link @ 400MHz = ht link multi @ 2x, 600MHz @ 3x... and so on... |
|
|
Jul 15 2010, 08:24 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(Mr_47 @ Jul 15 2010, 01:29 AM) so whats the max with ddr 3..... especially 1600 ? depends on chippies used on d module, d9 luvs juices while elpida/qimonda don't respond well to volts... max i reckon is ~2.0v for microns & 1.8v for d latters. QUOTE(selferino @ Jul 15 2010, 02:50 AM) 4ghz temps max load is like around 65 C, izzit not stable bcoz of the temps? very unlikely to stabilize ya chip @ 4ghz w/ that kinda load temp, i'd say max is 55'c. d lower d better... This post has been edited by ah_khoo: Jul 15 2010, 08:28 AM |
|
|
Jul 15 2010, 11:07 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(selferino @ Jul 15 2010, 02:50 AM) 4ghz temps max load is like around 65 C, izzit not stable bcoz of the temps? Time for WC |
|
|
Jul 15 2010, 11:15 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 15 2010, 08:24 AM) depends on chippies used on d module, d9 luvs juices while elpida/qimonda don't respond well to volts... max i reckon is ~2.0v for microns & 1.8v for d latters. Aiyohhhh really hard to get 55c for 4ghz, even with the Noctua i'm using on push/pull also sooo hard.. very unlikely to stabilize ya chip @ 4ghz w/ that kinda load temp, i'd say max is 55'c. d lower d better... Been reading a few articles about HSF and got me thinking if the high temp is because of the design of HSF not being so compatible with AMD chips like maybe the heatpipe orientation or something.. |
|
|
Jul 15 2010, 11:35 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 15 2010, 11:15 AM) Aiyohhhh really hard to get 55c for 4ghz, even with the Noctua i'm using on push/pull also sooo hard.. really? argghhh... damn those vendors who give inhell d priorities... Been reading a few articles about HSF and got me thinking if the high temp is because of the design of HSF not being so compatible with AMD chips like maybe the heatpipe orientation or something.. something This post has been edited by ah_khoo: Jul 15 2010, 12:54 PM |
|
|
Jul 15 2010, 12:50 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 15 2010, 11:35 AM) really? argghhh... damn those vendors who give inhell d priorities... Luis Vutton? Cetak rompak or original bro? something » Click to show Spoiler - click again to hide... « |
|
|
Jul 15 2010, 12:59 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 15 2010, 12:50 PM) Luis Vutton? Cetak rompak or original bro? pasar malam one as usual bro, my pay how can afford ori... » Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... « read in xs that even rog is havin undervolt/overvolt issue, btol ke bro??? This post has been edited by ah_khoo: Jul 15 2010, 01:11 PM |
|
|
Jul 15 2010, 01:08 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(cloudwan @ Jul 15 2010, 11:15 AM) Aiyohhhh really hard to get 55c for 4ghz, even with the Noctua i'm using on push/pull also sooo hard.. consider to lapped it? Been reading a few articles about HSF and got me thinking if the high temp is because of the design of HSF not being so compatible with AMD chips like maybe the heatpipe orientation or something.. |
|
|
Jul 15 2010, 01:26 PM
|
|
Senior Member
4,337 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
dude hyper x ddr3 (no lovo) 1600 = what chip usually?
damn lazy to open to see haha' |
|
|
Jul 15 2010, 01:56 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(saturn85 @ Jul 15 2010, 01:08 PM) consider to lapped it? Lapped what bro? My CPU or the HSF? If CPU i cannot ler, sked hard to sell and warranty out like that Added on July 15, 2010, 1:58 pm QUOTE(Mr_47 @ Jul 15 2010, 01:26 PM) dude hyper x ddr3 (no lovo) 1600 = what chip usually? Usually Kingston use Elpidas for their ram's.. damn lazy to open to see haha' Added on July 15, 2010, 2:00 pm QUOTE(ah_khoo @ Jul 15 2010, 12:59 PM) pasar malam one as usual bro, my pay how can afford ori... Yup, its true, it's really noticeable when u turn off load line calibration for the cpu, just imagine having ur cpu overvolt on idle & undervolt during load » Click to show Spoiler - click again to hide... « read in xs that even rog is havin undervolt/overvolt issue, btol ke bro??? This post has been edited by cloudwan: Jul 15 2010, 02:00 PM |
|
|
Jul 15 2010, 03:11 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(cloudwan @ Jul 15 2010, 01:56 PM) Lapped what bro? My CPU or the HSF? If CPU i cannot ler, sked hard to sell and warranty out like that haha, ya, lapped cpu got risk. |
|
|
Jul 15 2010, 04:06 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 15 2010, 01:56 PM) Yup, its true, it's really noticeable when u turn off load line calibration for the cpu, just imagine having ur cpu overvolt on idle & undervolt during load hopefully there'll be decent results from d timtam tonite... i miss d day where ~1700 @ cas7 (1600 lv cas7 on gd70) doable w/ < 1.6v... |
|
|
Jul 15 2010, 04:20 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 15 2010, 04:06 PM) hampeh... bestest mobo oso like that... manyak kaciwa ooo... I know, they should have control the vdroop from the get go.. Why must need to turn to load calibration just to ammend it hopefully there'll be decent results from d timtam tonite... i miss d day where ~1700 @ cas7 (1600 lv cas7 on gd70) doable w/ < 1.6v... Haiyah, whylah no one want to lend me any HP ram so i can test whats the highest ram speed my mobo can supot |
|
|
Jul 15 2010, 05:01 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
mobo apa la tu..
beli la ram canggih.. |
|
|
Jul 15 2010, 05:05 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(8tvt @ Jul 15 2010, 05:01 PM) mobo apa la tu.. Muahahaha mobo biostar TF7050 beli la ram canggih.. Mana ada duet bang woooi, mu punyer pasal ah suke poison org.. |
|
|
Jul 15 2010, 05:06 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 15 2010, 05:01 PM) mobo apa la tu.. btul2... mobo canggih tapi ram cikai... haiyaa.... x ngam lah... beli la ram canggih.. i'm gonna miss d gigabyte roadshow again... wanna learn something oso can't, NOOOOOOOOOOOOOOOOOOO!!!!!! |
|
|
Jul 15 2010, 05:13 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 15 2010, 05:06 PM) btul2... mobo canggih tapi ram cikai... haiyaa.... x ngam lah... Why u gonna miss the roadshow bro? U sooo bz ka? Bz with what meh? Making babies eh? i'm gonna miss d gigabyte roadshow again... wanna learn something oso can't, NOOOOOOOOOOOOOOOOOOO!!!!!! |
|
|
Jul 15 2010, 05:30 PM
|
|
Junior Member
443 posts Joined: Jun 2010
|
my AMD 720 fan blow at full speed at almost 6k++ rpm even in idle.i adjusted to default seeting in mobo setting also no change.
Please help me MOBO - MSI 770-C45 |
|
|
Jul 15 2010, 08:25 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(norman05051984 @ Jul 15 2010, 05:30 PM) my AMD 720 fan blow at full speed at almost 6k++ rpm even in idle.i adjusted to default seeting in mobo setting also no change. Did u set any fan control setting to keep ur cpu below certain temp or something? U plug into the CPU fan header right? Please help me MOBO - MSI 770-C45 |
|
|
Jul 15 2010, 08:43 PM
|
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland
|
hi to all the sifu here. maybe tis is not the right place to ask but may i know which is a good hsf for horizontal air flow for my cm USP 100 casing? my case doesn't have top air flow, can't put any fans on top. thx
|
|
|
Jul 15 2010, 10:11 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
me 2, using cm 690 II plus, shud i go rear exhaust or top exhaust for my hsf(tuniq tower 120 extreme)?
|
|
|
Jul 15 2010, 10:18 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
TT Extreme i make it top exhaust..how u want make it rear exhaust?Cannot also what..the HSF facing other side - -...
Or can meh? |
|
|
Jul 15 2010, 11:18 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(AMDAthlon @ Jul 15 2010, 10:18 PM) TT Extreme i make it top exhaust..how u want make it rear exhaust?Cannot also what..the HSF facing other side - -... mine is rev 1 set, they got giv extra AMD bracket, can use it to put rear exhaust Or can meh? . shud i lap my tuniq, but the thing is its HDT base, so still not sure.... |
|
|
Jul 15 2010, 11:29 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(selferino @ Jul 15 2010, 11:18 PM) mine is rev 1 set, they got giv extra AMD bracket, can use it to put rear exhaust Have u tried changing the TT extreme fan? I heard it wasn't really good . shud i lap my tuniq, but the thing is its HDT base, so still not sure....Maybe a higher CFM fan would do the trick? |
|
|
Jul 15 2010, 11:39 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(cloudwan @ Jul 15 2010, 11:29 PM) Have u tried changing the TT extreme fan? I heard it wasn't really good yeah i did, bought a Gentle typhoon fan(on my siggy), but apperently the stock fan still perform better(GT fans are way more quiet thou), so i guess i need a fan with higher cfm fan(bought the GT fan coz it has only 57 cfm, but very high static pressure, surely higher thn my stock fan), now not sure whether shud i stick to my stock fan(after i plan to lap it) or get a new fan(noise wont be a factor coz i hav sumbea, rhebous fan controller Maybe a higher CFM fan would do the trick? )my stock fan.... Bearing Type: Magnetic Fluid Dynamic Bearing Rated Voltage: 12V DC Rated Current: 0.26A (Max) Air Flow: 90.65 CFM (Max) Noise: 16~20 +/- 10%dBA Speed: 1000~2000 RPM Life: 50,000 hours Thermal Resistance 0.092 (℃ / W) shud i get either these 2 fans? Scythe 120x25mm SlipStream SY1225SL12SH (1,900 rpm, 110 cfm, 37 dBA) or Scythe S-Flex SFF21G (1,900 rpm, 75 cfm, 35 dBA) http://forum.lowyat.net/index.php?act=ST&f=54&t=1080565 all i noe the difference between these two fans are the bearings. This post has been edited by selferino: Jul 15 2010, 11:42 PM |
|
|
Jul 15 2010, 11:49 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Oooooo i heard the slipstream are good, sayang they got no bling2 version of it
|
|
|
Jul 15 2010, 11:56 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Change the stock fan of the TT extreme
Reviews said it is not 90.xx CFM as advertised Put for casing fan better |
|
|
Jul 16 2010, 12:03 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(shinjite @ Jul 15 2010, 11:56 PM) Change the stock fan of the TT extreme yeah i noe, but i would rate it around 75 cfm or so, still better thn cm 90cfm fans i think, n also the new scythe GT fan i bought, btw when u ment casing fan, which fan ur talking bout?Reviews said it is not 90.xx CFM as advertised Put for casing fan better Added on July 16, 2010, 12:05 am QUOTE(cloudwan @ Jul 15 2010, 11:49 PM) Oooooo i heard the slipstream are good, sayang they got no bling2 version of it so u think i shud go for slipstream rather thn s-flex? who cares bout bling2, performace > bling2 for me now, unless im fom moscow This post has been edited by selferino: Jul 16 2010, 12:05 AM |
|
|
Jul 16 2010, 12:31 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(selferino @ Jul 16 2010, 12:03 AM) yeah i noe, but i would rate it around 75 cfm or so, still better thn cm 90cfm fans i think, n also the new scythe GT fan i bought, btw when u ment casing fan, which fan ur talking bout? I meant by the stock TT Extreme's fanUse it as casing fan Added on July 16, 2010, 1:28 amOCZ Reapers currently running at 1066Mhz 5-5-5-15-20-2T at 2V, so far so good This post has been edited by shinjite: Jul 16 2010, 01:28 AM |
|
|
Jul 16 2010, 12:26 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
btw bro athlon n cloudwan, need ur help here, tolong!
http://forum.lowyat.net/topic/1491556 (spam2, hihihi) |
|
|
Jul 16 2010, 12:47 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(selferino @ Jul 16 2010, 12:26 PM) btw bro athlon n cloudwan, need ur help here, tolong! Erkkkkkk is it that sooo hard to find meh? http://forum.lowyat.net/topic/1491556 (spam2, hihihi) I never knew, i must have been lucky back then |
|
|
Jul 16 2010, 12:48 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
an update from my fren... not impressive at all consderin 1600 lv can do d same or even better...
|
|
|
Jul 16 2010, 12:52 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 16 2010, 12:48 PM) an update from my fren... not impressive at all consderin 1600 lv can do d same or even better... Eh only XMP profile meh? No BMP for AMD? Sayangnyer
|
|
|
Jul 16 2010, 12:57 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 16 2010, 12:52 PM) Eh only XMP profile meh? No BMP for AMD? Sayangnyer yup bro, very2 few ram manufacturers offer amd binned sticks... lets see whether he managed to get ~1600 @ 6-7-6... someone new here w/ his new toys... » Click to show Spoiler - click again to hide... « This post has been edited by ah_khoo: Jul 16 2010, 12:58 PM |
|
|
Jul 16 2010, 01:03 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
nice stuff you got there unker
|
|
|
Jul 16 2010, 01:06 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dafreak @ Jul 16 2010, 01:03 PM) nice stuff you got there unker that's not mine ok... dun get too excited... waitin for d rightful owner to post d ss... i'll give him time until tonite or lastest 2ml... |
|
|
Jul 16 2010, 03:06 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 16 2010, 01:06 PM) that's not mine ok... dun get too excited... You are too flatter on me which mean tonight I can't sleep early.. waitin for d rightful owner to post d ss... i'll give him time until tonite or lastest 2ml... Try my best ya.. If finish pass u tomorrow at SLS, pm me ur number in vr. |
|
|
Jul 16 2010, 03:33 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(louislkw @ Jul 16 2010, 03:06 PM) You are too flatter on me which mean tonight I can't sleep early.. meh... dun take it as pressure sir, it's more of a motivation... Try my best ya.. If finish pass u tomorrow at SLS, pm me ur number in vr. even d sticks failed u, i believe u wont fail me. havin only a nite mite be gud enuf for u, but it takes me days or even weeks to tweak a pair of ram... me ish slow... mite be goin to sls tomorrow, can't wait to use d flare sticks on my 690g board... |
|
|
Jul 16 2010, 04:01 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 16 2010, 03:33 PM) meh... dun take it as pressure sir, it's more of a motivation... I will be there most probably before 1130pm.. By the time I SMS you im will be on my way from AMK to SLS.. even d sticks failed u, i believe u wont fail me. havin only a nite mite be gud enuf for u, but it takes me days or even weeks to tweak a pair of ram... me ish slow... mite be goin to sls tomorrow, can't wait to use d flare sticks on my 690g board... |
|
|
Jul 16 2010, 04:01 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 16 2010, 03:33 PM) meh... dun take it as pressure sir, it's more of a motivation... DDR3 meh? U modified ur 690G mobo eh to make em fit eh? Hahahahaha even d sticks failed u, i believe u wont fail me. havin only a nite mite be gud enuf for u, but it takes me days or even weeks to tweak a pair of ram... me ish slow... mite be goin to sls tomorrow, can't wait to use d flare sticks on my 690g board... fuyooohhhh somebodi got chance to play2 with new rams la pulak.. |
|
|
Jul 16 2010, 04:09 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(louislkw @ Jul 16 2010, 04:01 PM) I will be there most probably before 1130pm.. By the time I SMS you im will be on my way from AMK to SLS.. sir, i supposed u mean 1130am rite? 1130pm there'll be another kind "customers" roamin around sls... those who receive pc parts made by papers... QUOTE(cloudwan @ Jul 16 2010, 04:01 PM) DDR3 meh? U modified ur 690G mobo eh to make em fit eh? Hahahahaha :/P got such thing one bro, if they can make sodimm to dimm converter, i'm sure i can find ddr3 to ddr2 converter in sls... fuyooohhhh somebodi got chance to play2 with new rams la pulak.. :/drool: :/drool: This post has been edited by ah_khoo: Jul 16 2010, 04:13 PM |
|
|
Jul 16 2010, 04:13 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 16 2010, 04:09 PM) sir, i supposed u mean 1130am rite? 1130pm there'll be another kind "customers" roamin around sls... those who receive pc parts made by papers... Ops sorry Sir, its would be 1130am. got such thing one bro, if they can make sodimm to dimm converter, i'm sure i can find ddr2 to ddr3 converter in sls... Today many typo errors.. |
|
|
Jul 16 2010, 04:15 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(selferino @ Jul 15 2010, 11:39 PM) yeah i did, bought a Gentle typhoon fan(on my siggy), but apperently the stock fan still perform better(GT fans are way more quiet thou), so i guess i need a fan with higher cfm fan(bought the GT fan coz it has only 57 cfm, but very high static pressure, surely higher thn my stock fan), now not sure whether shud i stick to my stock fan(after i plan to lap it) or get a new fan(noise wont be a factor coz i hav sumbea, rhebous fan controller )my stock fan.... Bearing Type: Magnetic Fluid Dynamic Bearing Rated Voltage: 12V DC Rated Current: 0.26A (Max) Air Flow: 90.65 CFM (Max) Noise: 16~20 +/- 10%dBA Speed: 1000~2000 RPM Life: 50,000 hours Thermal Resistance 0.092 (℃ / W) shud i get either these 2 fans? Scythe 120x25mm SlipStream SY1225SL12SH (1,900 rpm, 110 cfm, 37 dBA) or Scythe S-Flex SFF21G (1,900 rpm, 75 cfm, 35 dBA) http://forum.lowyat.net/index.php?act=ST&f=54&t=1080565 all i noe the difference between these two fans are the bearings. CFM lower better? O.O |
|
|
Jul 16 2010, 04:16 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
more cfm better..
|
|
|
Jul 16 2010, 04:25 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Oh
I thought the one with higher price has a low cfm is better... |
|
|
Jul 16 2010, 04:45 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(clon12 @ Jul 16 2010, 04:25 PM) Oh There is some trade offs, usually : I thought the one with higher price has a low cfm is better... High CFM = high DBA Low CFM = low DBA |
|
|
Jul 16 2010, 04:51 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
cfm = cubic feet per minute..
so if the value bigger the bigger can flow.. came from air speed x area bigger RPM (rotation per minute) is not necessary has big CFM.. it's depends on fan design (blade etc).. that's why some high end fan will rotate a little bit slow.. and no much noise but better air flow.. don't confuse with both of them.. |
|
|
Jul 16 2010, 04:56 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 16 2010, 04:51 PM) cfm = cubic feet per minute.. d guru has spoken... so if the value bigger the bigger can flow.. came from air speed x area bigger RPM (rotation per minute) is not necessary has big CFM.. it's depends on fan design (blade etc).. that's why some high end fan will rotate a little bit slow.. and no much noise but better air flow.. don't confuse with both of them.. that's why we have noctua fan which doesn't look so gud to d eyes, have weird blades + lower rpm havin a big price tag. it's all about design... This post has been edited by ah_khoo: Jul 16 2010, 04:56 PM |
|
|
Jul 16 2010, 05:19 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
u guys forgot bout one thing, the bearing type also effect the price tag, where bearing type determine how long or hours the fan would work, tats why the 2 scythe fans hav odd price tag, one is using superior bearing even with lower cfm thn the other
|
|
|
Jul 16 2010, 05:23 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
u want how many things?
motor, material, horsepower - all about design.. |
|
|
Jul 16 2010, 05:29 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(8tvt @ Jul 16 2010, 05:23 PM) u want how many things? haha lol! kne marah pulak, just wanna clarify ma, nnti org tanye "why lower cfm but price pricey(same brand)", tats why.motor, material, horsepower - all about design.. |
|
|
Jul 16 2010, 05:50 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(selferino @ Jul 16 2010, 05:29 PM) haha lol! kne marah pulak, just wanna clarify ma, nnti org tanye "why lower cfm but price pricey(same brand)", tats why. Easy mah, just answer that fan is 3k gold plated |
|
|
Jul 16 2010, 06:59 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
gold plated...can move?
|
|
|
Jul 16 2010, 10:22 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
new find out... not stable but a new breakthru...
|
|
|
Jul 16 2010, 10:40 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(cloudwan @ Jul 16 2010, 05:50 PM) Easy mah, just answer that fan is 3k gold plated some prefer bling².. what to do... design also |
|
|
Jul 16 2010, 11:10 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
wanna ask, lets say ive been OCing thru bios, n suddenly wanna changt to Overdrive, but when i open the program, all the values shown(aside from proc clock speed) looks default, the volts, HT link volts, clocks, n evertin. doesnt it suppose to load the seting automatically like in the bios settings?
|
|
|
Jul 17 2010, 01:12 AM
|
|
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland
|
hi, i wanna ask which one is a better choice among KINGSTON value ram, CORSAIR XMS3 gaming ram and TEAM Elite DDR3? i would like to get 2x2gb to oc my rig....hehe
This post has been edited by zerohunter: Jul 17 2010, 01:12 AM |
|
|
Jul 17 2010, 02:13 AM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
Round 1 Quick Run
Very tired, eyes cant open already.. Not much gained between 1T and 2T. 6-6-6 at 800MHz Failed 6-7-6 1T at 800MHz  6-7-6-2T at 800MHz  7-8-7 at 1000MHz Failed 7-9-7 1T at 1000MHz  7-9-7 2T at 1000MHz  |
|
|
Jul 17 2010, 08:49 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
zerohunter : depends on chip.. but so far all are average..
but i think this round would be team elite.. louislkw : ddr3 normally using 1T.. 1000mhz already fast.. what ram is that? |
|
|
Jul 17 2010, 09:04 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
1 question, why is it always the middle timing is loosen?
|
|
|
Jul 17 2010, 09:24 AM
|
|
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland
|
QUOTE(8tvt @ Jul 17 2010, 08:49 AM) zerohunter : depends on chip.. but so far all are average.. thx for the info. i was thinking to get team elite too coz the price is quite good i think, rm145 compare to kingston rm147but i think this round would be team elite.. louislkw : ddr3 normally using 1T.. 1000mhz already fast.. what ram is that? |
|
|
Jul 17 2010, 10:08 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(dafreak @ Jul 17 2010, 09:04 AM) 1 question, why is it always the middle timing is loosen? if u could understand this would be good.. hahahttp://www.techpowerup.com/articles/overclocking/64 becoz the delay rated that way.. if u want to make higher clock.. need to loosen it.. otherwise ofcourse not stable.. |
|
|
Jul 17 2010, 10:58 AM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(8tvt @ Jul 17 2010, 08:49 AM) louislkw : ddr3 normally using 1T.. 1000mhz already fast.. what ram is that? It's GSkill Flare PC16000 with timing 7-9-7-24-2N as posted by Sir Khoo. |
|
|
Jul 17 2010, 11:17 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(louislkw @ Jul 17 2010, 10:58 AM) Yes Sir, 1T definately faster than 2T but not to a much significant level. see u later sir, i'm still burnin d team sticks... can't get 'em burnt coz no matter how hard i try, they still look d way they are... It's GSkill Flare PC16000 with timing 7-9-7-24-2N as posted by Sir Khoo. after 269 rounds of test 5 in memtest (dos), my fren sees some silver lining... Attached thumbnail(s) 
|
|
|
Jul 17 2010, 11:47 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
finally 1 hour done...
gskill flare in action... my fren's chip is a let down but d volt looks really gud... 
This post has been edited by ah_khoo: Jul 17 2010, 04:09 PM |
|
|
Jul 17 2010, 06:33 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
sir louislkw, can u do me a favor, pls throw that pair of team dark into dustbin as my fren dont need it liao coz he's keepin ya flare sticks...
GSKILL Flare ftw... p/s: these sticks really works well w/ higher divider, i'm lovin it... This post has been edited by ah_khoo: Jul 18 2010, 10:53 PM Attached thumbnail(s) 
|
|
|
Jul 17 2010, 07:00 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Woah ah khoo..you triple post..i suggest you just edit it next time..
|
|
|
Jul 17 2010, 07:00 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ah_khoo @ Jul 17 2010, 06:33 PM) sir louislkw, can u do me a favor, pls throw that pair of team dark into dustbin as my fren dont need it liao coz he's keepin ya flare sticks... dont wan throw to me not dustbin GSKILL Flare ftw... p/s: these sticks really works well w/ 1600 divider, i'm lovin it... |
|
|
Jul 17 2010, 07:57 PM
|
Junior Member
44 posts Joined: Jan 2008 From: KULIM/SP/KL
|
Hi all...
Need some help from otai DFI...  can u teach me how to flash new bios with safe.last time i try to flash and my mobo got crash and need to sent RMA. Model DFI Lanparty DK790FX M2RS SB 600. |
|
|
Jul 17 2010, 09:02 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(DaRkZoNe @ Jul 17 2010, 07:57 PM) Hi all... use USB drive to flash bios is the usual way.Need some help from otai DFI... can u teach me how to flash new bios with safe.last time i try to flash and my mobo got crash and need to sent RMA. Model DFI Lanparty DK790FX M2RS SB 600. just have to make sure the power don't suddenly off. but this is out of control, you will never know when the power will suddenly off. maybe you can use UPS. |
|
|
Jul 17 2010, 09:07 PM
|
|
Junior Member
44 posts Joined: Jan 2008 From: KULIM/SP/KL
|
QUOTE(saturn85 @ Jul 17 2010, 10:02 PM) use USB drive to flash bios is the usual way. UPS dont understand bro can tell me step by step.If got SC better for me. just have to make sure the power don't suddenly off. but this is out of control, you will never know when the power will suddenly off. maybe you can use UPS. |
|
|
Jul 17 2010, 09:23 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(DaRkZoNe @ Jul 17 2010, 09:07 PM) UPS dont understand bro can tell me step by step.If got SC better for me. UPS is uninterrupt power supply.see this instruction: http://tw.dficlub.com/tw/modules/newbb/vie...9#forumpost6679 |
|
|
Jul 17 2010, 10:23 PM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 17 2010, 06:33 PM) sir louislkw, can u do me a favor, pls throw that pair of team dark into dustbin as my fren dont need it liao coz he's keepin ya flare sticks... Sir Khoo, yours seem like doing not bad ya.. GSKILL Flare ftw... p/s: these sticks really works well w/ 1600 divider, i'm lovin it... Still playing with it.. |
|
|
Jul 17 2010, 10:29 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(louislkw @ Jul 17 2010, 10:23 PM) Sir Khoo, yours seem like doing not bad ya.. sir, i think my fren is hittin d wall soon, there's nothing much he can do w/ a propus... mebe u can consider loanin him ya x6 too... Still playing with it.. joke aside, never in my wildest dream would i expect a propus can drive a pair of ram this far... d flare sticks are really something... 
p/s: are d team dark sticks doin ok on CHIV? do keep me posted too so that i can update my fren... This post has been edited by ah_khoo: Jul 17 2010, 10:40 PM |
|
|
Jul 17 2010, 11:30 PM
|
|
Junior Member
44 posts Joined: Jan 2008 From: KULIM/SP/KL
|
QUOTE(saturn85 @ Jul 17 2010, 10:23 PM) UPS is uninterrupt power supply. Thx bro already update new bios version. see this instruction: http://tw.dficlub.com/tw/modules/newbb/vie...9#forumpost6679 |
|
|
Jul 18 2010, 12:03 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(DaRkZoNe @ Jul 17 2010, 11:30 PM) Thx bro already update new bios version. you are welcome, bro. but why need to update bios? |
|
|
Jul 18 2010, 12:14 AM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 17 2010, 10:29 PM) sir, i think my fren is hittin d wall soon, there's nothing much he can do w/ a propus... mebe u can consider loanin him ya x6 too... Sir Khoo, team dark doing good... joke aside, never in my wildest dream would i expect a propus can drive a pair of ram this far... d flare sticks are really something... p/s: are d team dark sticks doin ok on CHIV? do keep me posted too so that i can update my fren... 6-7-7 max out at 776mhz  7-7-7 at 800mhz  1000 mhz coming soon... |
|
|
Jul 18 2010, 12:27 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(louislkw @ Jul 18 2010, 12:14 AM) Sir Khoo, team dark doing good... gud job sir... I'm longin for 7-8-7 @ 1k... dun worry bout d volt, just whack. u got d permission to kill these sticks... i want d newer version which is runnin on 1.6v... 6-7-7 max out at 776mhz 7-7-7 at 800mhz 1000 mhz coming soon... d gskill fan is sittin on my fren's pc table, he asked me to tell u dun worry bout ya ram, he will do d ram proud by settin 'em on fire, that way they meant to be else why gskill call 'em flare, rite? is that u & ya meimei in macau? This post has been edited by ah_khoo: Jul 18 2010, 10:36 PM |
|
|
Jul 18 2010, 12:34 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
wah, what a friend you have there. can hantam saja
|
|
|
Jul 18 2010, 12:59 AM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 18 2010, 12:27 AM) god job sir... I'm longin for 7-8-7 @ 1k... dun worry bout d volt, just whack. u got d permission to kill these sticks... i want d newer version which is runnin on 1.6v... 7-8-7 at 1k!! Not possible Sir. Definately will kill it or degrade it in air. d gskill fan is sittin on my fren's pc table, he asked me to tell u dun worry bout ya ram, he will do d ram proud by settin 'em on fire, that way they meant to be else why gskill call 'em flare, rite? is that u & ya meimei in macau? Ya, taken in macau. Lol. Spotted. Set it on fire, remember to take a picture of it. I wanna see it. edit: Sir, your dark charco dun like high volt, alway dump me.. Disappointed you, no luck in 1k. Its binned to intel. This post has been edited by louislkw: Jul 18 2010, 01:53 AM |
|
|
Jul 18 2010, 09:36 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(dafreak @ Jul 18 2010, 12:34 AM) wah, what a friend you have there. can hantam saja it's easier to spoil ppl's thing than his own (& vice versa), so... QUOTE(louislkw @ Jul 18 2010, 12:59 AM) 7-8-7 at 1k!! Not possible Sir. Definately will kill it or degrade it in air. lol.. i was just pullin ya legs sir, it's too much to ask for from a pair of mid range ram, if they can do 9-9-9 @ 1k on amd i'll be dead happy ledi. Ya, taken in macau. Lol. Spotted. Set it on fire, remember to take a picture of it. I wanna see it. edit: Sir, your dark charco dun like high volt, alway dump me.. Disappointed you, no luck in 1k. Its binned to intel. anyway, this is my fren's last attempt, i believe he had gave his best... there's limit for d hardwares he has & i consider this as a good result, far from great thou... again credits to ya generosity, he just passed me ya flare sticks so that i can return 'em to u 2ml... anytime from 9am-6pm @ smrset mrt (or singtel comcentre) sounds ok to u sir? 
This post has been edited by ah_khoo: Jul 18 2010, 11:00 PM |
|
|
Jul 19 2010, 02:26 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 18 2010, 09:36 PM) it's easier to spoil ppl's thing than his own (& vice versa), so... Hahahaha, pass it to me 1st lah, let me play2 with it also lol.. i was just pullin ya legs sir, it's too much to ask for from a pair of mid range ram, if they can do 9-9-9 @ 1k on amd i'll be dead happy ledi. anyway, this is my fren's last attempt, i believe he had gave his best... there's limit for d hardwares he has & i consider this as a good result, far from great thou... again credits to ya generosity, he just passed me ya flare sticks so that i can return 'em to u 2ml... anytime from 9am-6pm @ smrset mrt (or singtel comcentre) sounds ok to u sir? » Click to show Spoiler - click again to hide... « So jeles everbodi is playing with new ram's |
|
|
Jul 19 2010, 10:00 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 19 2010, 02:26 AM) Hahahaha, pass it to me 1st lah, let me play2 with it also :/lol: :/P u wouldn't want it bro, coz it's hard when it's time to part w/ d ram... x sampai hati nak return but if i'm keepin it means i gotta go to jail in case sir louislkw report polis. So jeles everbodi is playing with new ram's :/cry: :/cry: :/P joke aside, it's time for u to equip yaself w/ a decent pair of ram... kvr is gud but pairin w/ *tut is like havin a honda civic w/ proton saga stock rim... This post has been edited by ah_khoo: Jul 19 2010, 10:01 AM |
|
|
Jul 19 2010, 10:29 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
yeah..that tut is good to pair with dom GT... or tracer red.. kekeke..
i dont have much time to play like u all.. and also no hw as good as u all also..but ah khoo, can rate G-skill eco? since u always read here and there, sure u know abit.. i wonder how it will perform with 1.6vdimm (since the lowest my mobo able to set) |
|
|
Jul 19 2010, 10:38 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 19 2010, 10:00 AM) u wouldn't want it bro, coz it's hard when it's time to part w/ d ram... x sampai hati nak return but if i'm keepin it means i gotta go to jail in case sir louislkw report polis. joke aside, it's time for u to equip yaself w/ a decent pair of ram... kvr is gud but pairin w/ *tut is like havin a honda civic w/ proton saga stock rim... QUOTE(kuntawakaw @ Jul 19 2010, 10:29 AM) yeah..that tut is good to pair with dom GT... or tracer red.. kekeke.. Hahahahaha, what to do money already invested in other things, soooo that tut have to do with lowly KVR lah i dont have much time to play like u all.. and also no hw as good as u all also..but ah khoo, can rate G-skill eco? since u always read here and there, sure u know abit.. i wonder how it will perform with 1.6vdimm (since the lowest my mobo able to set) I guess have to wait for that special moment like last time when i got my 1st ever High Performance ram's, oh my ballistix |
|
|
Jul 19 2010, 10:56 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 19 2010, 10:29 AM) yeah..that tut is good to pair with dom GT... or tracer red.. kekeke.. regor especially real x2 has decent imc imo, u can clock nb freq & ram quite well w/ it bro, don't be disheartened. u'll find joy tweakin it as long as u dont give up/get bored. had some fun tweakin d gud old am2 platform now as i dun have decent hw like bro cloudwan & sir louislkw. i dont have much time to play like u all.. and also no hw as good as u all also..but ah khoo, can rate G-skill eco? since u always read here and there, sure u know abit.. i wonder how it will perform with 1.6vdimm (since the lowest my mobo able to set) can't really rate as i never play w/ gskill eco, bro 8tvt played w/ it b4 so he would be in better position to comment. 7-8-7@1600 sounds like powerchips to me. they don't like high volts like elpida from what i heard. i'd say these 2 usually reach their max freq (for 24/7) @ x-(x+1 or 2)-x around 1.6~1.75v. don't think gskill is kind enuf to put bbse for value sticks, but in case they're really use bbse, consider yaself lucky then. QUOTE(cloudwan @ Jul 19 2010, 10:38 AM) Hahahahaha, what to do money already invested in other things, soooo that tut have to do with lowly KVR lah :/x :/x :/lol: kad plastik... kad plastik... I guess have to wait for that special moment like last time when i got my 1st ever High Performance ram's, oh my ballistix :/wub: :/wub: :/P This post has been edited by ah_khoo: Jul 19 2010, 11:01 AM |
|
|
Jul 19 2010, 11:21 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 19 2010, 10:56 AM) regor especially real x2 has decent imc imo, u can clock nb freq & ram quite well w/ it bro, don't be disheartened. u'll find joy tweakin it as long as u dont give up/get bored. had some fun tweakin d gud old am2 platform now as i dun have decent hw like bro cloudwan & sir louislkw. got eh bbse on eco? i tot eco quite cheap ram.. and bbse on premium ram one.. can't really rate as i never play w/ gskill eco, bro 8tvt played w/ it b4 so he would be in better position to comment. 7-8-7@1600 sounds like powerchips to me. they don't like high volts like elpida from what i heard. i'd say these 2 usually reach their max freq (for 24/7) @ x-(x+1 or 2)-x around 1.6~1.75v. don't think gskill is kind enuf to put bbse for value sticks, but in case they're really use bbse, consider yaself lucky then. still if regor have quite a strong imc, the mobo still holding me back.. just imagine 158Xmhz cl7 stable..but 1600mhz is absolutely not stable ( i able to prime 8mins last time, now boot also cant) even with cl9.. tried with cl6..disappointing, cant even get 1300mhz, 127Xmhz max... after all that is value ram.. thats y considering other ram.. WTB 1week team elite anyone?kekeke This post has been edited by kuntawakaw: Jul 19 2010, 11:26 AM |
|
|
Jul 19 2010, 11:32 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 19 2010, 10:56 AM) regor especially real x2 has decent imc imo, u can clock nb freq & ram quite well w/ it bro, don't be disheartened. u'll find joy tweakin it as long as u dont give up/get bored. had some fun tweakin d gud old am2 platform now as i dun have decent hw like bro cloudwan & sir louislkw. What decent hware bro? Makin downgrade adalah: can't really rate as i never play w/ gskill eco, bro 8tvt played w/ it b4 so he would be in better position to comment. 7-8-7@1600 sounds like powerchips to me. they don't like high volts like elpida from what i heard. i'd say these 2 usually reach their max freq (for 24/7) @ x-(x+1 or 2)-x around 1.6~1.75v. don't think gskill is kind enuf to put bbse for value sticks, but in case they're really use bbse, consider yaself lucky then. kad plastik... kad plastik... » Click to show Spoiler - click again to hide... « Kad plastik nak kena potong kalu x smpi tua x abis bayar Added on July 19, 2010, 11:33 am QUOTE(kuntawakaw @ Jul 19 2010, 11:21 AM) got eh bbse on eco? i tot eco quite cheap ram.. and bbse on premium ram one.. WTS meh? Cannot give for free ka? still if regor have quite a strong imc, the mobo still holding me back.. just imagine 158Xmhz cl7 stable..but 1600mhz is absolutely not stable ( i able to prime 8mins last time, now boot also cant) even with cl9.. tried with cl6..disappointing, cant even get 1300mhz, 127Xmhz max... after all that is value ram.. thats y considering other ram.. WTB 1week team elite anyone?kekeke This post has been edited by cloudwan: Jul 19 2010, 11:33 AM |
|
|
Jul 19 2010, 11:37 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 19 2010, 11:21 AM) got eh bbse on eco? i tot eco quite cheap ram.. and bbse on premium ram one.. ya elite 1333 could be on elpida -6-e (iirc), was very new to ddr3 that time that's why managed a 1466 @ 7-7-7 only. on intel 1600 is not a problem if i'm not mistaken. still if regor have quite a strong imc, the mobo still holding me back.. just imagine 158Xmhz cl7 stable..but 1600mhz is absolutely not stable ( i able to prime 8mins last time, now boot also cant) even with cl9.. tried with cl6..disappointing, cant even get 1300mhz, 127Xmhz max... after all that is value ram.. thats y considering other ram.. WTB 1week team elite anyone?kekeke elite 1600 could be on powerchips too coz i saw very gud clocks on these sticks in vr-z... but it could be d case like kvr lucky draw, sometimes u get decent one while sometimes not... if u want guaranteed result, go for team dark lv, not only team dark coz team dark 1600 cas 8 (non lv) oso sucks... can u post d cpu teaker ss as well? if i can't help (which i doubt i can), i'm retty sure others can... QUOTE(cloudwan @ Jul 19 2010, 11:32 AM) What decent hware bro? Makin downgrade adalah: propus/deneb core bro? it's fun oso playin w/ locked chip coz it's more challengin (imo). where's d be chip? on d way to sg ledi? » Click to show Spoiler - click again to hide... « Kad plastik nak kena potong kalu x smpi tua x abis bayar This post has been edited by ah_khoo: Jul 19 2010, 11:41 AM |
|
|
Jul 19 2010, 11:45 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 19 2010, 11:32 AM) WTS meh? Cannot give for free ka? gip free kenot..trade with tut can la..kekekek.. no topup2QUOTE(ah_khoo @ Jul 19 2010, 11:37 AM) ya elite 1333 could be on elpida -6-e (iirc), was very new to ddr3 that time that's why managed a 1466 @ 7-7-7 only. on intel 1600 is not a problem if i'm not mistaken. later since now at workplace... aod ss can unker? since i really hate play with cpu tweaker.. last time my ehem2 edition of win7 always change to basic color scheme once open cpu-tweaker..so i always use AOD for advance timing tweaking.. can u post d cpu teaker ss as well? if i can't help (which i doubt i can), i'm retty sure others can... u sure knowledgeable eh unker.. all ram know what chip.. i seldom read now..since quite bz + no internet at home.. so ketingalan zaman abit.. now always heard elpida and micron only.. qimonda not perform well ka? kekeke since i saw on winova value ram.. kekeke... |
|
|
Jul 19 2010, 11:53 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 19 2010, 11:45 AM) later since now at workplace... aod ss can unker? since i really hate play with cpu tweaker.. last time my ehem2 edition of win7 always change to basic color scheme once open cpu-tweaker..so i always use AOD for advance timing tweaking.. sure, just need sometimes to digest, it's been a while since i last use aod coz 690g doesn't support acc. u sure knowledgeable eh unker.. all ram know what chip.. i seldom read now..since quite bz + no internet at home.. so ketingalan zaman abit.. now always heard elpida and micron only.. qimonda not perform well ka? kekeke since i saw on winova value ram.. kekeke... meh, it's not about knowledgeable or not, just that i got d chance to play w/ other ppl's hw only... i'm still a proud am2 owner....  u can refer HERE for d "koleksi" i've tested, most on 7xx platform. more (on thuban) here http://forums.vr-zone.com/overclockers-hid...tml#post8164466 This post has been edited by ah_khoo: Jul 19 2010, 12:23 PM |
|
|
Jul 19 2010, 12:39 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 19 2010, 11:37 AM) propus/deneb core bro? it's fun oso playin w/ locked chip coz it's more challengin (imo). where's d be chip? on d way to sg ledi? Still not sure if its propus or deneb bro, haven't plug in yet, looks like propus C2.. U want the BE ka? If i throw from here can reach ur place ka? QUOTE(kuntawakaw @ Jul 19 2010, 11:45 AM) gip free kenot..trade with tut can la..kekekek.. no topup2 LOL trade with tut? No way hose, trade with my KVR la bro |
|
|
Jul 19 2010, 12:48 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 19 2010, 12:39 PM) Still not sure if its propus or deneb bro, haven't plug in yet, looks like propus C2.. sure can reach one, one to one exchange w/ my sempron? U want the BE ka? If i throw from here can reach ur place ka? I want d c |
|
|
Jul 19 2010, 06:41 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
what is this 'tut'??
i dont understand... |
|
|
Jul 20 2010, 08:22 AM
|
Junior Member
225 posts Joined: Nov 2007 From: Kuala Kangsar | Penang
|
count me in!
AMD Phenom II X2 550BE | 3716Mhz | AMDPhenom |Asus M4A78-E | Kingston Hyper-X DDR2 6400 | 1070Mhz | 5-8-8-24-32 | Gigabyte G-Power 2 Cooler  |
|
|
Jul 20 2010, 10:30 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(villa07 @ Jul 20 2010, 08:22 AM) count me in! Nice try there mate AMD Phenom II X2 550BE | 3716Mhz | AMDPhenom |Asus M4A78-E | Kingston Hyper-X DDR2 6400 | 1070Mhz | 5-8-8-24-32 | Gigabyte G-Power 2 Cooler » Click to show Spoiler - click again to hide... « , but seems kinda high volt to get to 3.7ghz there.. Ur cpu unlockable or not? Have u try?Added on July 20, 2010, 10:32 am QUOTE(dafreak @ Jul 19 2010, 06:41 PM) what is this 'tut'?? Hahahaha, tut is what they call my mobo i dont understand... Donno why tho This post has been edited by cloudwan: Jul 20 2010, 10:32 AM |
|
|
Jul 20 2010, 10:37 AM
|
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
QUOTE(ah_khoo @ Jul 18 2010, 09:36 PM) it's easier to spoil ppl's thing than his own (& vice versa), so... Sir, its not a problem to do 9-9-9 1T on amd in 1k. Just dont have enough time to tighten it. Hehe. lol.. i was just pullin ya legs sir, it's too much to ask for from a pair of mid range ram, if they can do 9-9-9 @ 1k on amd i'll be dead happy ledi. anyway, this is my fren's last attempt, i believe he had gave his best... there's limit for d hardwares he has & i consider this as a good result, far from great thou... again credits to ya generosity, he just passed me ya flare sticks so that i can return 'em to u 2ml... anytime from 9am-6pm @ smrset mrt (or singtel comcentre) sounds ok to u sir?
The 1090T going strong, stable at 16x250 for 6 hours prime test. Not my target yet. Later tonight need to break the 4.2ghz wall since the temperature still below 60 degC. |
|
|
Jul 20 2010, 10:48 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 19 2010, 12:39 PM) Still not sure if its propus or deneb bro, haven't plug in yet, looks like propus C2.. tarik balik...not yet to sell..have to change mobo 1st to unleash the ram true performance..kekekeke..U want the BE ka? If i throw from here can reach ur place ka? LOL trade with tut? No way hose, trade with my KVR la bro 870 giga or asrock? tight budget..only can settle for less then 400... unker..here u go.. 1600mhz passed tho..but with hell of vdimm and loose timing.. need to increase 0.8vdimm for few mhz.. 
both same setting..just another 1 is with AOD open.. Added on July 20, 2010, 10:51 am QUOTE(villa07 @ Jul 20 2010, 08:22 AM) count me in! lol at bolded.. AMD Phenom II X2 550BE | 3716Mhz | AMDPhenom |Asus M4A78-E | Kingston Hyper-X DDR2 6400 | 1070Mhz | 5-8-8-24-32 | Gigabyte G-Power 2 Cooler from this Athlon 4600+F3 | 3450Mhz | AMDAthlon |Abit AX78 | OCZ DDR2 6400 | 850Mhz | 4-4-4-12-16 | AMD Stock Cooler this is our TS lyn nick.. not the proc name...kekekek no offense bro, just u make me giggle.. kekekek This post has been edited by kuntawakaw: Jul 20 2010, 10:51 AM |
|
|
Jul 20 2010, 11:02 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 20 2010, 10:48 AM) tarik balik...not yet to sell..have to change mobo 1st to unleash the ram true performance..kekekeke.. Hahahahaha, don't want to sell la plak.. kakakaka..870 giga or asrock? tight budget..only can settle for less then 400... unker..here u go.. 1600mhz passed tho..but with hell of vdimm and loose timing.. need to increase 0.8vdimm for few mhz.. » Click to show Spoiler - click again to hide... « both same setting..just another 1 is with AOD open.. Added on July 20, 2010, 10:51 am lol at bolded.. from this Athlon 4600+F3 | 3450Mhz | AMDAthlon |Abit AX78 | OCZ DDR2 6400 | 850Mhz | 4-4-4-12-16 | AMD Stock Cooler this is our TS lyn nick.. not the proc name...kekekek no offense bro, just u make me giggle.. kekekek Why go for 870 giga or asrock bro? Go for Ahsos M4A88TD-V EVO/USB3 lah, only RM365 at viewnet last time i bought.. It has 2 PCIE that can run 8x/8x IIANM Plus it comes preinstall with pwmsinks so u won't have to look for it later.. |
|
|
Jul 20 2010, 11:09 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 20 2010, 11:02 AM) Hahahahaha, don't want to sell la plak.. kakakaka.. before yesterday i tot i was done playing with my modules..but unker's word yesterday triggerd me.. so i active cooled these rams and push further.. carik2 dlm laci ade lebih2 yate loon 80mm..kekeke..Why go for 870 giga or asrock bro? Go for Ahsos M4A88TD-V EVO/USB3 lah, only RM365 at viewnet last time i bought.. It has 2 PCIE that can run 8x/8x IIANM Plus it comes preinstall with pwmsinks so u won't have to look for it later.. nape? nk beli betul ke?kekeke.. too many ahsus evo user here and all bising2 about the vdroop.. iinm 870 giga also able to CF right? but now priority goes to ram oc only.. ( cpu not im mood to OC.. know the limit edi + using stock cooler only now ).. |
|
|
Jul 20 2010, 11:16 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 20 2010, 11:09 AM) before yesterday i tot i was done playing with my modules..but unker's word yesterday triggerd me.. so i active cooled these rams and push further.. carik2 dlm laci ade lebih2 yate loon 80mm..kekeke.. I think most mobo has vdroop issue, with asos u turn on the load calibration it should help with the vdroop issue.. 870 giga cannot CF lah, coz limited PCIE lanes.. u running 16x/4x nanti nape? nk beli betul ke?kekeke.. too many ahsus evo user here and all bising2 about the vdroop.. iinm 870 giga also able to CF right? but now priority goes to ram oc only.. ( cpu not im mood to OC.. know the limit edi + using stock cooler only now )..If ur not gonna CF and u don't mind the naked pwm bro, by all means go for the giga, it has all the features of the SB850 plus more.. I don't like the asrock coz less supot here plus it doesn't supot USB3.0 for the future |
|
|
Jul 20 2010, 11:25 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 20 2010, 11:16 AM) I think most mobo has vdroop issue, with asos u turn on the load calibration it should help with the vdroop issue.. 870 giga cannot CF lah, coz limited PCIE lanes.. u running 16x/4x nanti i was thinking trying low profile Hw only.. so asrock quite low profile here.. but thinking later hard to sell back.. susah pulak..If ur not gonna CF and u don't mind the naked pwm bro, by all means go for the giga, it has all the features of the SB850 plus more.. I don't like the asrock coz less supot here plus it doesn't supot USB3.0 for the future the giga.. the blue PCB match my taste..so thinking of it..kekeke.. later if got more moolah then sell off la..1 month torture and sell off with rm50 off still marketable..right?kekeke isnt it the load line calib will make the vcore drop during load that even worse with it off..right? CF..hmm.. thinking bout it since have 2x 4830..but none of my PSUs support that..so ill ditch CF anyway.. PWMsink, also dont care since have ramsinks spare.. |
|
|
Jul 20 2010, 11:55 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
Tomorrow sending my PC to replace the radiator......FINALLY!!!
Looks like I won't be overclocking much now since I haven't get a dedicated GPU for my system hyet So max is 300Mhz HTT This post has been edited by shinjite: Jul 20 2010, 11:56 AM |
|
|
Jul 20 2010, 12:01 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(shinjite @ Jul 20 2010, 11:55 AM) Tomorrow sending my PC to replace the radiator......FINALLY!!! 300htt is awesome edi.. even with discrete GC.. around 330ht hard to push edi..or if u have more skill and better HW, can go around 350 (ive seen few cases of ppl here able to go this far, donno oversea forum since not read much nowadays)Looks like I won't be overclocking much now since I haven't get a dedicated GPU for my system hyet So max is 300Mhz HTT want more? buy BE instead..kekekeke. p/s anyone comment me with my previous SS..about the sub timing.. esp unker ah khoo..anything need to be loosen that will drastically improve ability to push the freq? leave comment tomorrow ill reply..thanks This post has been edited by kuntawakaw: Jul 20 2010, 12:09 PM |
|
|
Jul 20 2010, 12:18 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 20 2010, 10:30 AM) Hahahaha, tut is what they call my mobo :/lol: Donno why tho :/w it's special edition, that's why we are bothered bro... QUOTE(louislkw @ Jul 20 2010, 10:37 AM) Sir, its not a problem to do 9-9-9 1T on amd in 1k. Just dont have enough time to tighten it. Hehe. yup, true enuf, ram tweakin is always time consumin sir... my fren is havin hardtime to make his dark charcoal to match ya flare sticks... he'll do what ever it takes to hit 1840... even gettin d sticks burnt... The 1090T going strong, stable at 16x250 for 6 hours prime test. Not my target yet. Later tonight need to break the 4.2ghz wall since the temperature still below 60 degC. woot... i'm pretty sure d BE chip can break 4.2GHz barrier... keep it up... QUOTE(kuntawakaw @ Jul 20 2010, 10:48 AM) tarik balik...not yet to sell..have to change mobo 1st to unleash the ram true performance..kekekeke.. hmm... aod indeed is hard to read, i'll digest it tonite & let u know...870 giga or asrock? tight budget..only can settle for less then 400... unker..here u go.. 1600mhz passed tho..but with hell of vdimm and loose timing.. need to increase 0.8vdimm for few mhz.. :/sweat: :/sweat: » Click to show Spoiler - click again to hide... « both same setting..just another 1 is with AOD open.. close call between ahsos 880 & giga 870 this time... i will take either one but ram mileage is really impressive for d former. not surprsin thou coz ram tweakin has always been d strong point of ahsos high end board, they're kind enuf this time to implement d same on el cheapo board like d 880 evo. yup, gotta hate d undervolt/overvolt issue but nothing's perfect especially if u consider d price... QUOTE(cloudwan @ Jul 20 2010, 11:02 AM) Why go for 870 giga or asrock bro? Go for Ahsos M4A88TD-V EVO/USB3 lah, only RM365 at viewnet last time i bought.. :/thumbs: bro, nampaknyer u dah jadik traitor gaygay... It has 2 PCIE that can run 8x/8x IIANM :/drool: Plus it comes preinstall with pwmsinks so u won't have to look for it later.. :/hehe: but i gotta agree, ahsos has an advantage this time round... 880 cf @ 16x/4x only thou... only 890 cf @ 8x/8x... QUOTE(kuntawakaw @ Jul 20 2010, 11:09 AM) before yesterday i tot i was done playing with my modules..but unker's word yesterday triggerd me.. so i active cooled these rams and push further.. carik2 dlm laci ade lebih2 yate loon 80mm..kekeke.. i believe both are in d same league, but since ur lookin more into ram oc, imo ahsos is slightly better... nape? nk beli betul ke?kekeke.. too many ahsus evo user here and all bising2 about the vdroop.. iinm 870 giga also able to CF right? but now priority goes to ram oc only.. ( cpu not im mood to OC.. know the limit edi + using stock cooler only now :/sweat: :/sweat: ).. QUOTE(cloudwan @ Jul 20 2010, 11:16 AM) I think most mobo has vdroop issue, with asos u turn on the load calibration it should help with the vdroop issue.. 870 giga cannot CF lah, coz limited PCIE lanes.. u running 16x/4x nanti :/x gaygay didn't officially mention cf is supported on their 870, but i think shouldn't be a problem if users ready to give up other pci-e ports which share d same bandwidth as d 4x pci-e port for 2nd gfx. If ur not gonna CF and u don't mind the naked pwm bro, by all means go for the giga, it has all the features of the SB850 plus more.. I don't like the asrock coz less supot here plus it doesn't supot USB3.0 for the future :/x :/x This post has been edited by ah_khoo: Jul 20 2010, 12:47 PM |
|
|
Jul 20 2010, 11:47 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
Haha, add on a side fan and T at load now 49 from 54-55 @ 3.7GHz. Can OC more now
|
|
|
Jul 21 2010, 12:39 AM
|
|
Junior Member
225 posts Joined: Nov 2007 From: Kuala Kangsar | Penang
|
QUOTE(cloudwan @ Jul 20 2010, 10:30 AM) Nice try there mate mine is 0931GPMW..no luck in unlocking.. , but seems kinda high volt to get to 3.7ghz there.. Ur cpu unlockable or not? Have u try?Added on July 20, 2010, 10:32 am Hahahaha, tut is what they call my mobo Donno why tho |
|
|
Jul 21 2010, 09:13 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
hey guys, i installed gaygay's EasyTune6 from the website, but how come it wont run eh?
nvm, it was hiding in the tray.. This post has been edited by dafreak: Jul 21 2010, 09:17 AM |
|
|
Jul 21 2010, 09:58 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
gskill flare wannabe...
» Click to show Spoiler - click again to hide... « @ kunta: try to play around with: 1. write to read delay 2. write to write delay 3. command rate @ 2t not sure this gonna help but my fren tried it (1&2) on his team dark & it works. This post has been edited by ah_khoo: Jul 21 2010, 10:12 AM |
|
|
Jul 21 2010, 11:10 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(dafreak @ Jul 21 2010, 09:13 AM) hey guys, i installed gaygay's EasyTune6 from the website, but how come it wont run eh? Aik? Main sorok2 pulak.. kakakaka nvm, it was hiding in the tray.. |
|
|
Jul 21 2010, 11:10 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 21 2010, 09:58 AM) @ kunta: the CR is always 2t if i want it stable with 1600mhz.. 1t need to add another notch of vdimm.. so i settle with 2t anyway..try to play around with: 1. write to read delay 2. write to write delay 3. command rate @ 2t not sure this gonna help but my fren tried it (1&2) on his team dark & it works. those 2 delays i loosened edi.. from 3 (with divider 1333 / 1066) to 4.. if using 1600 divider, auto already at 4 so i dont bother loosen it some more.. since i notice it affect the read and write on everest quite alot... i dont want just high speed but ultra loose timing.. how about the R-to-W dqs cont? i loosen i gain extra speed according to everest..donno the reading true or not.. auto normally at 5 or 4..i loosen to 6 or 8.. anyway ill try posting the cpu tweaker SS tomorow..todays not bring any SS to workplace..so cant post..slightly improve the timing with 1600 divider.. is there any other software to run benchmark on ram only? (and ofkos IMC included but not CPU, or atleast have separate result of ram and cpu just like everest ) Added on July 21, 2010, 11:16 am QUOTE(cloudwan @ Jul 21 2010, 11:10 AM) Aik? Main sorok2 pulak.. kakakaka that software pelik...1st time open, hide in systray..need to right click >show baru keluar 2nd time and so on i need to open the software 2 times.. and right click >show baru keluar.. kalau x, sorok2 lg die..kekekek.. so all recommend me ahsos eh for the ram tweak.. will do some homework after this.. once get paid, straight away buy new mobo.. » Click to show Spoiler - click again to hide... « This post has been edited by kuntawakaw: Jul 21 2010, 11:16 AM |
|
|
Jul 21 2010, 11:43 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 21 2010, 11:10 AM) the CR is always 2t if i want it stable with 1600mhz.. 1t need to add another notch of vdimm.. so i settle with 2t anyway.. waaa... ur pro coz i never tried w/ benchies when i'm pushin ram. me = mat rempit, you = valentino rossi. can't really answer d dqs thingy coz i'm still bz pushin d those 2 delays i loosened edi.. from 3 (with divider 1333 / 1066) to 4.. if using 1600 divider, auto already at 4 so i dont bother loosen it some more.. since i notice it affect the read and write on everest quite alot... i dont want just high speed but ultra loose timing.. how about the R-to-W dqs cont? i loosen i gain extra speed according to everest..donno the reading true or not.. auto normally at 5 or 4..i loosen to 6 or 8.. anyway ill try posting the cpu tweaker SS tomorow..todays not bring any SS to workplace..so cant post..slightly improve the timing with 1600 divider.. is there any other software to run benchmark on ram only? (and ofkos IMC included but not CPU, or atleast have separate result of ram and cpu just like everest ) Added on July 21, 2010, 11:16 am that software pelik... 1st time open, hide in systray..need to right click >show baru keluar 2nd time and so on i need to open the software 2 times.. and right click >show baru keluar.. kalau x, sorok2 lg die..kekekek.. so all recommend me ahsos eh for the ram tweak.. will do some homework after this.. once get paid, straight away buy new mobo.. » Click to show Spoiler - click again to hide... « u can use sandra memory benchmark too... ahsos did a gud job on 88td-v evo this time, credits to 'em but boo to distro in sg ... This post has been edited by ah_khoo: Jul 21 2010, 11:49 AM |
|
|
Jul 21 2010, 12:02 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 21 2010, 11:43 AM) waaa... ur pro coz i never tried w/ benchies when i'm pushin ram. me = mat rempit, you = valentino rossi. can't really answer d dqs thingy coz i'm still bz pushin d ok..since u said evo wins in mem tweaking, ill take it.. hope can get it with this upcoming salary.. if not..need to wait another month la.. u can use sandra memory benchmark too... ahsos did a gud job on 88td-v evo this time, credits to 'em but boo to distro in sg ... dont be too humble bro.. im too noob in ram OC..so need ur guidance..kekeke i want to reach 1600mhz need to sacrifice alot of timing.. if loosen the main timing, xlawa.. if alter the sub timing, no one knows if no AOD/cpu tweaker included that is why need to see which faster.. and isnt d9gmh is ddr2 64mb/chip ramchip? or im getting older..kekeke |
|
|
Jul 21 2010, 12:14 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 21 2010, 11:10 AM) » Click to show Spoiler - click again to hide... « |
|
|
Jul 21 2010, 12:25 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 21 2010, 12:02 PM) ok..since u said evo wins in mem tweaking, ill take it.. hope can get it with this upcoming salary.. if not..need to wait another month la.. i think evo has an edge coz so far i haven't see much decent freq done on gaygay 870 boards, could be better under d hands of pro but sadly no pro (in forums that i visit frequently) review that board yet. from what i feel, pushin ram on ahsos 880 is as effortless as biobintang 790gx a3+. ofcoz it's harder towards d wall but for mild~mid freq, it's really a breeze... dont be too humble bro.. im too noob in ram OC..so need ur guidance..kekeke i want to reach 1600mhz need to sacrifice alot of timing.. if loosen the main timing, xlawa.. if alter the sub timing, no one knows if no AOD/cpu tweaker included that is why need to see which faster.. and isnt d9gmh is ddr2 64mb/chip ramchip? or im getting older..kekeke QUOTE(cloudwan @ Jul 21 2010, 12:14 PM) Nih nak cari pasal ah nih, ada pejabat ngan umah kena simbah cat merah nih yalor hor, i only realize now i oso involved... damn!!! let pour cat merah @ his house, office, bike or even car... This post has been edited by ah_khoo: Jul 21 2010, 12:42 PM |
|
|
Jul 21 2010, 12:49 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 21 2010, 12:14 PM) Nih nak cari pasal ah nih, ada pejabat ngan umah kena simbah cat merah nih jgn mara..wa men2 je..kekke.. once i get paid, will transfer to u in no time QUOTE(ah_khoo @ Jul 21 2010, 12:25 PM) i think evo has an edge coz so far i haven't see much decent freq done on gaygay 870 boards, could be better under d hands of pro but sadly no pro (in forums that i visit frequently) review that board yet. from what i feel, pushin ram on ahsos 880 is as effortless as biobintang 790gx a3+. ofcoz it's harder towards d wall but for mild~mid freq, it's really a breeze... ya..miss that biostar.. regret i let it go for such a cheap price.. buyer offer 300 i dont want..i want only 270..kekekke.. yalor hor, i only realize now i oso involved... damn!!! let pour cat merah @ his house, office, bike or even car... eh..excuse me sir, how come u involved with this matter? i dont recall in debt with u..kekekeke..hutang budi got la..kekeke.. giga 770ud3p anyone?kekekek |
|
|
Jul 21 2010, 12:55 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 21 2010, 12:49 PM) jgn mara..wa men2 je..kekke.. once i get paid, will transfer to u in no time biostar oh biostar... i wish i have d chance to try d 890fxe... anyone willin to sponsor me one? ya..miss that biostar.. regret i let it go for such a cheap price.. buyer offer 300 i dont want..i want only 270..kekekke.. eh..excuse me sir, how come u involved with this matter? i dont recall in debt with u..kekekeke..hutang budi got la..kekeke.. giga 770ud3p anyone?kekekek lol... i thought some other thing... nevermind, misunderstandin but bro cloudwan is my evil twin gemini brother, so i gotta help him out a bit mah... This post has been edited by ah_khoo: Jul 21 2010, 01:00 PM |
|
|
Jul 21 2010, 01:13 PM
|
|
Senior Member
4,337 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(dafreak @ Jul 21 2010, 09:13 AM) hey guys, i installed gaygay's EasyTune6 from the website, but how come it wont run eh? yep i can confirm that, u might wanna wait for a minute for it to show up or jus click the shortcut again and again... gaygay' nvm, it was hiding in the tray.. QUOTE(cloudwan @ Jul 21 2010, 11:10 AM) Aik? Main sorok2 pulak.. kakakaka yes its gaygay.... malu lar nak kuar .... QUOTE(ah_khoo @ Jul 21 2010, 12:55 PM) biostar oh biostar... i wish i have d chance to try d 890fxe... anyone willin to sponsor me one? attention, this is the poisoning thread..... not a sponsorship thread haha lol... i thought some other thing... nevermind, misunderstandin but bro cloudwan is my evil twin gemini brother, so i gotta help him out a bit mah... |
|
|
Jul 21 2010, 02:07 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 21 2010, 12:55 PM) biostar oh biostar... i wish i have d chance to try d 890fxe... anyone willin to sponsor me one? What can we say we are united.. kakakaka lol... i thought some other thing... nevermind, misunderstandin but bro cloudwan is my evil twin gemini brother, so i gotta help him out a bit mah... Got devil logo some more |
|
|
Jul 21 2010, 03:54 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
tighter timing..
and this is the AOD.. 
doubt can push even more..need change mobo 1st whoaahh..finally, screamyx finish the installation edi.. after 2months of subscribing.. |
|
|
Jul 21 2010, 04:04 PM
|
|
Senior Member
5,221 posts Joined: Aug 2007 From: Deneb star
|
Woah dashat 2 months..
Before this u use what? - - Looks good .. Unfortunately,i have quitted on RAM Overclocking P/S : Database update will be done weekly |
|
|
Jul 21 2010, 04:06 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 21 2010, 02:07 PM) What can we say we are united.. kakakaka betol2... Got devil logo some more QUOTE(kuntawakaw @ Jul 21 2010, 03:54 PM) tighter timing.. gud job there...
and this is the AOD..
doubt can push even more..need change mobo 1st whoaahh..finally, screamyx finish the installation edi.. after 2months of subscribing.. try again w/ 1t & make it prime stable... |
|
|
Jul 21 2010, 04:16 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(AMDAthlon @ Jul 21 2010, 04:04 PM) Woah dashat 2 months.. maxisbb untill last month and pnjam celcombb from kawan while working..kekekeBefore this u use what? - - Looks good .. 1month taken to survey my place.. and another 1 month for installation..few times came but fail.. so takes alot of time.. QUOTE(ah_khoo @ Jul 21 2010, 04:06 PM) betol2... did tried.. fail within minutes.. and btw..my trfc seems differ aod and cmos.. gud job there... try again w/ 1t & make it prime stable... cmos = 110ns , aod = 160ns cmos =90ns , aod = 110ns.. dayum..later open cpu tweaker to confirm.. u have the same issue last time bro cloudwan? that is last night SS..today not yet OC... kekeke.. edit: cpu tweaker shows same value as AOD.. dayum.. up till now i was clocking with loose trfc.. This post has been edited by kuntawakaw: Jul 21 2010, 04:19 PM |
|
|
Jul 21 2010, 04:27 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 21 2010, 04:16 PM) maxisbb untill last month and pnjam celcombb from kawan while working..kekeke 110ns in real seems tight enuf for me, ram guru xixo once said, d tighter d better but higher volt needed. 1month taken to survey my place.. and another 1 month for installation..few times came but fail.. so takes alot of time.. did tried.. fail within minutes.. and btw..my trfc seems differ aod and cmos.. cmos = 110ns , aod = 160ns cmos =90ns , aod = 110ns.. dayum..later open cpu tweaker to confirm.. u have the same issue last time bro cloudwan? that is last night SS..today not yet OC... kekeke.. edit: cpu tweaker shows same value as AOD.. dayum.. up till now i was clocking with loose trfc.. This post has been edited by ah_khoo: Jul 21 2010, 04:32 PM |
|
|
Jul 21 2010, 04:39 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 21 2010, 04:27 PM) 110ns in real seems tight enuf for me, ram guru xixo once said, d tighter d better but higher volt needed. i donno y but i set myself to put 110ns.seldom put other that that value.. only sometimes put 160ns if fed up cant stable.. downloaded f11a bios..will update later..now need sleep.. tonight go all nighter again (not me..PC only) |
|
|
Jul 21 2010, 05:04 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 21 2010, 04:16 PM) maxisbb untill last month and pnjam celcombb from kawan while working..kekeke I think i may have face the same issue before, just didn't cross my mind to check with AOD, no wonder most oc is hard to get blend stable.. 1month taken to survey my place.. and another 1 month for installation..few times came but fail.. so takes alot of time.. did tried.. fail within minutes.. and btw..my trfc seems differ aod and cmos.. cmos = 110ns , aod = 160ns cmos =90ns , aod = 110ns.. dayum..later open cpu tweaker to confirm.. u have the same issue last time bro cloudwan? that is last night SS..today not yet OC... kekeke.. edit: cpu tweaker shows same value as AOD.. dayum.. up till now i was clocking with loose trfc.. |
|
|
Jul 21 2010, 07:45 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 21 2010, 05:04 PM) I think i may have face the same issue before, just didn't cross my mind to check with AOD, no wonder most oc is hard to get blend stable.. alasan nak tuka mobo je tu... |
|
|
Jul 21 2010, 07:55 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 21 2010, 07:45 PM) alasan nak tuka mobo je tu... Shadap u! I was talking about my old Giga mobo lah, already tukar what to do pakai sajalah |
|
|
Jul 21 2010, 09:12 PM
|
Senior Member
1,138 posts Joined: Aug 2005 From: Blackout 
|
aku baru jah beli PSU cooler master 750watt true power
agak2 dah leh oc sedap2 x aku nye proc and 9800gtx+ aku? |
|
|
Jul 21 2010, 09:16 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 21 2010, 05:04 PM) I think i may have face the same issue before, just didn't cross my mind to check with AOD, no wonder most oc is hard to get blend stable.. updated my bios..F11a..issue, cant unlock... so i tried with F10..also the same..cant unlock.. since only these 2 bios available for download at giga wwebsite.. last time tried F8...also cant unlock.. now on F6a.. if got issue will update to F7 instead since both i have downloaded last time..F9 no where to find.. malas nk carik kat web lain.. anyone facing the same issue? (i guess not so many user of this board exist now) @Syfq aku OC pakai 400w true je.. kekeke.. dulu lg best..pakai chap ayam huntkey..kekkeke |
|
|
Jul 21 2010, 09:31 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(Syfq @ Jul 21 2010, 09:12 PM) aku baru jah beli PSU cooler master 750watt true power Dah bole sgt dah tapi kalu pkai stock HSF pun x bole jugak bro nak oc kaw-kaw.. agak2 dah leh oc sedap2 x aku nye proc and 9800gtx+ aku? QUOTE(kuntawakaw @ Jul 21 2010, 09:16 PM) updated my bios.. Hahahaha, the highest bios rev i tried was the F7, more than that i forgot to download F11a..issue, cant unlock... so i tried with F10..also the same..cant unlock.. since only these 2 bios available for download at giga wwebsite.. last time tried F8...also cant unlock.. now on F6a.. if got issue will update to F7 instead since both i have downloaded last time..F9 no where to find.. malas nk carik kat web lain.. anyone facing the same issue? (i guess not so many user of this board exist now) @Syfq aku OC pakai 400w true je.. kekeke.. dulu lg best..pakai chap ayam huntkey..kekkeke |
|
|
Jul 21 2010, 09:31 PM
|
|
Senior Member
1,138 posts Joined: Aug 2005 From: Blackout
|
aku dah cube OC proc aku
cpu speed 3.9ghz with 1.5vcore and temp aku plak arround 70 - 80 'c max , 30 minute test AMD overdrive proc aku C2 , ada harapan leh pegi jauh x? This post has been edited by Syfq: Jul 21 2010, 09:32 PM |
|
|
Jul 21 2010, 09:43 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 21 2010, 09:31 PM) Dah bole sgt dah tapi kalu pkai stock HSF pun x bole jugak bro nak oc kaw-kaw.. sedih..the F10 bios have vdimm 1.5 min but this can only set min 1.6v...and few other features..but no luck..cant unlock..Hahahaha, the highest bios rev i tried was the F7, more than that i forgot to download this bios not fix the trfc issue also..haish kekeke..this mobo came with F5.. i wonder u no rike update bios ka..kkekeke not broken dont fix eh? edit: i just realize that i downloaded the rev 1.4 one..luckily able to boot since not much diff..if not, have to ask instruction to hotflash la..kekeke flashing now..hope able to unlock.. This post has been edited by kuntawakaw: Jul 21 2010, 09:52 PM |
|
|
Jul 21 2010, 09:57 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(Syfq @ Jul 21 2010, 09:31 PM) aku dah cube OC proc aku Temp tuh tinggi sgt la bro, nak pendekkan hayat cpu ke? cpu speed 3.9ghz with 1.5vcore and temp aku plak arround 70 - 80 'c max , 30 minute test AMD overdrive proc aku C2 , ada harapan leh pegi jauh x? U pkai stock HSF ker utk oc smpi 3.9ghz? Kalu iyer turun balik ah, kawe x caya stock HSF utk high OC nih.. Paling tinggi 3.6ghz ah.. Get a better cooler 1st lah.. Atleast CM Hyper 212+ QUOTE(kuntawakaw @ Jul 21 2010, 09:43 PM) sedih..the F10 bios have vdimm 1.5 min but this can only set min 1.6v...and few other features..but no luck..cant unlock.. Hahahaha, that's why lah, paling suke that bios rev, test all others seems ada short sana short sini this bios not fix the trfc issue also..haish kekeke..this mobo came with F5.. i wonder u no rike update bios ka..kkekeke not broken dont fix eh? edit: i just realize that i downloaded the rev 1.4 one..luckily able to boot since not much diff..if not, have to ask instruction to hotflash la..kekeke flashing now..hope able to unlock.. |
|
|
Jul 21 2010, 10:03 PM
|
|
Senior Member
1,138 posts Joined: Aug 2005 From: Blackout
|
QUOTE(cloudwan @ Jul 21 2010, 10:57 PM) Temp tuh tinggi sgt la bro, nak pendekkan hayat cpu ke? hambe pakai ASUS Trition 81 . ok la huhuU pkai stock HSF ker utk oc smpi 3.9ghz? Kalu iyer turun balik ah, kawe x caya stock HSF utk high OC nih.. Paling tinggi 3.6ghz ah.. Get a better cooler 1st lah.. Atleast CM Hyper 212+ Hahahaha, that's why lah, paling suke that bios rev, test all others seems ada short sana short sini |
|
|
Jul 21 2010, 10:12 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(Syfq @ Jul 21 2010, 10:03 PM) hambe pakai ASUS Trition 81 . ok la huhu Tp temp smpi 80c x sehat bro.. Phenom II temp threshold is below 65c |
|
|
Jul 21 2010, 11:25 PM
|
|
Senior Member
4,337 posts Joined: Jan 2003 From: Bora-bora u jelly? Special: Age of multi-monitor
|
QUOTE(cloudwan @ Jul 21 2010, 10:12 PM) Tp temp smpi 80c x sehat bro.. Phenom II temp threshold is below 65c org lain 40-50 dah risau dah....dier slamber je hamtam 80 haha  maybe stock cooler? |
|
|
Jul 22 2010, 12:25 PM
|
|
Senior Member
1,580 posts Joined: Feb 2006 From: Melaka, Singapore
|
the temp is too high
|
|
|
Jul 22 2010, 02:33 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(Syfq @ Jul 21 2010, 09:31 PM) aku dah cube OC proc aku 80c is too hot.....cpu speed 3.9ghz with 1.5vcore and temp aku plak arround 70 - 80 'c max , 30 minute test AMD overdrive proc aku C2 , ada harapan leh pegi jauh x? Time for WC |
|
|
Jul 22 2010, 02:50 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(shinjite @ Jul 22 2010, 02:33 PM) 80c is too hot..... Perghhhh shinjite, WC trus Time for WC |
|
|
Jul 22 2010, 02:50 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(Syfq @ Jul 21 2010, 09:31 PM) aku dah cube OC proc aku casing air flow good?cpu speed 3.9ghz with 1.5vcore and temp aku plak arround 70 - 80 'c max , 30 minute test AMD overdrive proc aku C2 , ada harapan leh pegi jauh x? |
|
|
Jul 22 2010, 03:56 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(cloudwan @ Jul 22 2010, 02:50 PM) Perghhhh shinjite, WC trus dier mmg, sume org dier nk poisonkn WC! weyh, ive OC the proc to stablize it, NB 1.4 volts, proc 1.5volts, HB speed 2600MHz, still cant, n i noe i use to much volt but thn keep getting blue screens man, tats not temp related, i nor tat, dem sedey tul! |
|
|
Jul 22 2010, 04:18 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(selferino @ Jul 22 2010, 03:56 PM) dier mmg, sume org dier nk poisonkn WC! weyh, ive OC the proc to stablize it, NB 1.4 volts, proc 1.5volts, HB speed 2600MHz, still cant, n i noe i use to much volt but thn keep getting blue screens man, tats not temp related, i nor tat, dem sedey tul! What's ur ram volt? Did u up ur CPU-NB volt? NB volt is kinda pointless to me ah |
|
|
Jul 22 2010, 04:22 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 22 2010, 04:18 PM) What's ur ram volt? Did u up ur CPU-NB volt? NB volt is kinda pointless to me ah huish,,xkan la NB mobo smpai 1.4..die stock kat 1.2v kan? iirc max pena letak 1.26v je.. xpena tggi2 sbb heatsink xbagus sgt..kekekeoverall volt kindda high tho.. u might reach ur wall edi.. the best spot is before u need increase alot of vcore for a small amount of mhz.. kekeke |
|
|
Jul 22 2010, 07:08 PM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
Holla guys, im looking for 8800 Ultra or 79xxGTX/GT series for my second rig...
if you guys have any info please do let me know ya,thanks for being helpful... |
|
|
Jul 22 2010, 08:18 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
WC chun mah
|
|
|
Jul 23 2010, 01:53 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(verdict @ Jul 22 2010, 07:08 PM) Holla guys, im looking for 8800 Ultra or 79xxGTX/GT series for my second rig... Apa nih bro verdict, lama x nampak tetibe muncul tanya psal obsolete GPU? if you guys have any info please do let me know ya,thanks for being helpful... |
|
|
Jul 23 2010, 02:24 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(cloudwan @ Jul 22 2010, 04:18 PM) What's ur ram volt? Did u up ur CPU-NB volt? NB volt is kinda pointless to me ah the NB volt i meant was cpu NB volt ofkos supposely shud be stable, alredy wack the higest volt man, dun tell me the blue screen crap is bcoz my window 7 64 bit is the culprit |
|
|
Jul 23 2010, 02:28 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
really need 1.4v to make the CPU NB to stable at 2600mhz?
|
|
|
Jul 23 2010, 03:08 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
sumhow yeah, weird ryte? tat one oso cant pass prime95 test below 384k
Added on July 23, 2010, 3:09 amtis is the info... - Windows 7 Ultimate 64-bit - Phenom II 965 BE - CPU stepping : CACAC AC 09456PMW - Revision : RB-C3 - Max CPU clock speed : 3917.7 MHz (200.9*19.5) - CPU voltage : 1.472 V - Northbridge clock : 2600.0 MHz @ 1.40 V - HTT link speed : 2009.1 MHz - HTT link voltage : stock voltage(shud be at 1.1v) - Motherboard used : GIGABYTE 870A-UD3 - Type of cooling : Tuniq Tower 120 Extreme(Air) This post has been edited by selferino: Jul 23 2010, 03:09 AM |
|
|
Jul 23 2010, 08:19 AM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
QUOTE(cloudwan @ Jul 23 2010, 02:53 AM) Apa nih bro verdict, lama x nampak tetibe muncul tanya psal obsolete GPU? He He He...ada je kat sini, cuma monitor je apa yg terjadi~ Anda semakin liar ye...ada saja racun serangga dan senjata baru ye... |
|
|
Jul 23 2010, 09:29 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(verdict @ Jul 23 2010, 08:19 AM) He He He...ada je kat sini, cuma monitor je apa yg terjadi~ oh... rupe2 nyer sis verdict is watchin over us here... Anda semakin liar ye...ada saja racun serangga dan senjata baru ye... how's d road to recovery sis, hopefully all went well for u. been there b4 but not as serious as yas, it's hard to sit in d house barely do anything... abang otroman leni upgrade like no tomorrow, guns blazin w/ x3 440, ahsos 880 edisi spesial, x-fi dan lain2 lagi... tersepak duit di tepi jalan kot.... jeles nyer... @ selferino, how bout load temp? 384 = small fft, mite cause by cpu instability. how bout 13 * 300 instead? This post has been edited by ah_khoo: Jul 23 2010, 10:39 AM |
|
|
Jul 23 2010, 10:27 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
how come x3 440?
|
|
|
Jul 23 2010, 10:34 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 23 2010, 10:27 AM) how come x3 440? x taulah bro, siggy dier tulis cam tu... mebe bored playin w/ BE chip, nak challengin ckit... This post has been edited by ah_khoo: Jul 23 2010, 10:34 AM |
|
|
Jul 23 2010, 10:46 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
downgrade topup ram?
|
|
|
Jul 23 2010, 10:49 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 23 2010, 10:46 AM) downgrade topup ram? downgrade then upgrade to 1090t kot? |
|
|
Jul 23 2010, 11:20 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(verdict @ Jul 23 2010, 08:19 AM) He He He...ada je kat sini, cuma monitor je apa yg terjadi~ What to do bro, cannot do anything else, got to have someone tabur racun if not weeds will grow in this thread Anda semakin liar ye...ada saja racun serangga dan senjata baru ye... QUOTE(ah_khoo @ Jul 23 2010, 09:29 AM) oh... rupe2 nyer sis verdict is watchin over us here... :/P Mana upgrade mah, downgrade kire tersepak duit tepi jalan ke? Bukan tergolek tersepak kayu ka? how's d road to recovery sis, hopefully all went well for u. been there b4 but not as serious as yas, it's hard to sit in d house barely do anything... :/angry: abang otroman leni upgrade like no tomorrow, guns blazin w/ x3 440, ahsos 880 edisi spesial, x-fi dan lain2 lagi... tersepak duit di tepi jalan kot.... jeles nyer... :/drool: :/wub: :/blush: @ selferino, how bout load temp? 384 = small fft, mite cause by cpu instability. how bout 13 * 300 instead? /:hmm: QUOTE(8tvt @ Jul 23 2010, 10:27 AM) how come x3 440? QUOTE(ah_khoo @ Jul 23 2010, 10:34 AM) x taulah bro, siggy dier tulis cam tu... mebe bored playin w/ BE chip, nak challengin ckit... QUOTE(8tvt @ Jul 23 2010, 10:46 AM) downgrade topup ram? QUOTE(ah_khoo @ Jul 23 2010, 10:49 AM) downgrade then upgrade to 1090t kot? Stat lah tuh mau timbulkan kontroversi, no ram lor just plain old cpu |
|
|
Jul 23 2010, 11:23 AM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
tingkatkan prestasi bukan kontroversi..
muahaha - upgrade² |
|
|
Jul 23 2010, 11:48 AM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(8tvt @ Jul 23 2010, 11:23 AM) tingkatkan prestasi bukan kontroversi.. Korok muh, salah slogan tuh, rakyat didahulukan pencapaian diutamakan lah.. Eh bukan... muahaha - upgrade² Upgrade didahulukan maggi dimakankan |
|
|
Jul 23 2010, 12:45 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(ah_khoo @ Jul 23 2010, 09:29 AM) oh... rupe2 nyer sis verdict is watchin over us here... load temp was like 62-63C,(coz of the high volt i need to pump), tried lower volts, cant get to stable above 512k ffts, keep getting blue screen(hardware failure n bla3). 300 HTT? i got BE, just use multi, if wanna play wif bus, alot of stuff need to be done, maybe downclock my ram first or whatnot? how's d road to recovery sis, hopefully all went well for u. been there b4 but not as serious as yas, it's hard to sit in d house barely do anything... abang otroman leni upgrade like no tomorrow, guns blazin w/ x3 440, ahsos 880 edisi spesial, x-fi dan lain2 lagi... tersepak duit di tepi jalan kot.... jeles nyer... @ selferino, how bout load temp? 384 = small fft, mite cause by cpu instability. how bout 13 * 300 instead? |
|
|
Jul 23 2010, 01:07 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(selferino @ Jul 23 2010, 12:45 PM) load temp was like 62-63C,(coz of the high volt i need to pump), tried lower volts, cant get to stable above 512k ffts, keep getting blue screen(hardware failure n bla3). 300 HTT? i got BE, just use multi, if wanna play wif bus, alot of stuff need to be done, maybe downclock my ram first or whatnot? Ur playing with only multi bro? Of course its gonna be hard like that.. Try playing with combo of HTT oc & multi bro, u will find u will use less cpu volt and better milage like that.. |
|
|
Jul 23 2010, 01:54 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
here's my my latest priming stable using fft option(max 1024k MAX to 128k MIN), 1 minute per test(thou sumtimes they go more thn 1 test, like to test for some FFT, weird
)
this time my CPU-NB i put 1.25v only rather thn 1.4v, my cpu volt still the same(1.47v in bios but it will always be lower using Everest, CPU-Z n HWmonitor), CPU-NB speed still at 2600MHz, tats all i change, but weird my second worker(2nd core) got fatal error, but my other workers still fine n manage to pass the test( izzit bcoz i enable rounding check error?) well i dunnno, dun tell me i got defect core . max temps it hit was 61 C, but for a while it will drop back even at 58 C constantly when the test progress, man OC is fun but pening siot!!!This post has been edited by selferino: Jul 23 2010, 02:35 PM |
|
|
Jul 23 2010, 02:07 PM
|
|
Senior Member
2,096 posts Joined: May 2008
|
QUOTE(selferino @ Jul 23 2010, 01:54 PM) dun tell me i got defect core You mean Core 2? But literally doesn't seems like a damaged core. Maybe any experts care to advise him . max temps it hit was 61 C, but for a while it will drop back even at 58 C constantly when the test progress, man OC is fun but pening siot!!! |
|
|
Jul 23 2010, 02:43 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
i think shouldn't be a defect core, just the calculation got wrong result at the core, mean this overclock maybe cause error.
|
|
|
Jul 23 2010, 03:03 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 23 2010, 11:20 AM) Mana upgrade mah, downgrade kire tersepak duit tepi jalan ke? Bukan tergolek tersepak kayu ka? :/lol: kontroversi ke spekulasi ke... kite tunggu & lihat ajer... Stat lah tuh mau timbulkan kontroversi, no ram lor just plain old cpu :/w :/w :/P QUOTE(selferino @ Jul 23 2010, 12:45 PM) load temp was like 62-63C,(coz of the high volt i need to pump), tried lower volts, cant get to stable above 512k ffts, keep getting blue screen(hardware failure n bla3). 300 HTT? i got BE, just use multi, if wanna play wif bus, alot of stuff need to be done, maybe downclock my ram first or whatnot? try these:ht link @ 7 * 300 nb freq @ 8 * 300 ram near 1333/1600 (depend on how well it clock) vhtt @ 1.3v vnb @ 1.25 vimc @ 1.25~1.275v vcore stay below 1.5v. QUOTE(selferino @ Jul 23 2010, 01:54 PM) here's my my latest priming stable using fft option(max 1024k MAX to 128k MIN), 1 minute per test(thou sumtimes they go more thn 1 test, like to test for some FFT, weird :/stars: :/stars: :/stars: ) i always use customed blend test, min @ 8, max @ 4096, minute = 1
this time my CPU-NB i put 1.25v only rather thn 1.4v, my cpu volt still the same(1.47v in bios but it will always be lower using Everest, CPU-Z n HWmonitor), CPU-NB speed still at 2600MHz, tats all i change, but weird my second worker(2nd core) got fatal error, but my other workers still fine n manage to pass the test( izzit bcoz i enable rounding check error?) :/stars: well i dunnno, dun tell me i got defect core :/(. max temps it hit was 61 C, but for a while it will drop back even at 58 C constantly when the test progress, man OC is fun but pening siot!!! not all core have d same capability, there is/are always weaker core(s). weaker core(s) != bad core(s) thou, AMD never guarantee all d cores in their chips have d same mileage, unless we are talkin bout stock clock. This post has been edited by ah_khoo: Jul 23 2010, 03:44 PM |
|
|
Jul 23 2010, 08:09 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
one prob bro ah_khoo, in my BIOS, no option for vhtt, no option for multi change of nb freq. see here in the pic of the BIOS i took fom the net..
Added on July 23, 2010, 8:10 pmmy mobo is gaygaybyte 870a-ud3 btw Added on July 23, 2010, 8:15 pmthe pic i posted was ddr2, mine using ddr3, but other are the same, just in case This post has been edited by selferino: Jul 23 2010, 08:15 PM |
|
|
Jul 23 2010, 08:27 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(selferino @ Jul 23 2010, 08:09 PM) one prob bro ah_khoo, in my BIOS, no option for vhtt, no option for multi change of nb freq. see here in the pic of the BIOS i took fom the net.. Did u press CTRL+F5 or was it F8 to unlock extra option in the bios?
Added on July 23, 2010, 8:10 pmmy mobo is gaygaybyte 870a-ud3 btw Added on July 23, 2010, 8:15 pmthe pic i posted was ddr2, mine using ddr3, but other are the same, just in case Gaygaybyte are always like that, they like to hide some options using that |
|
|
Jul 23 2010, 08:31 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 23 2010, 08:27 PM) Did u press CTRL+F5 or was it F8 to unlock extra option in the bios? isnt f8 for safe mode thingy?Gaygaybyte are always like that, they like to hide some options using that im sad..no one want to buy my mobo.. price reduce even more also dont have takers.. special for AMD ocer kaki.. rm170... kekeke |
|
|
Jul 23 2010, 08:33 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
isnt it CTRL + F1?
|
|
|
Jul 23 2010, 08:48 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
yeah its CTRL + F1 but thn no OC option will come out, already check the manual anytin, man, my msi mobo last time even has more option!
Added on July 23, 2010, 8:48 pmonly some chipset confiq only(spectrum stuff bla3) This post has been edited by selferino: Jul 23 2010, 08:49 PM |
|
|
Jul 23 2010, 08:53 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
im not sure what problem you are facing but the bios looks like typical giga bios
most options are similar with mine |
|
|
Jul 23 2010, 08:55 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 23 2010, 08:31 PM) isnt f8 for safe mode thingy? Aisyemen bro, sedey reading ur post, if had extra moolah i bought the item back from u im sad..no one want to buy my mobo.. price reduce even more also dont have takers.. special for AMD ocer kaki.. rm170... kekeke Give it some time, i know someone gonna want that mobo |
|
|
Jul 23 2010, 08:56 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(selferino @ Jul 23 2010, 08:48 PM) yeah its CTRL + F1 but thn no OC option will come out, already check the manual anytin, man, my msi mobo last time even has more option! vht/vsb also dont have?Added on July 23, 2010, 8:48 pmonly some chipset confiq only(spectrum stuff bla3) that msi sure have richer bios..but the ocability not that well i guess.. even the voltage increase is finer.. tried with HTT multi combo edi? |
|
|
Jul 23 2010, 08:58 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
from d manual in MIT:
cpu clock ratio = cpu multi cpu nb freq = cpu nb aka nb freq multi cpu host clock control = htt pcie clock = pci-e freq ht link freq = ht link multi set mem clock = mem divider dram config = mem timing set sys voltage ctrl = manual d rest like what mentioned b4. quite direct if u ask me...  |
|
|
Jul 23 2010, 09:04 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
owh yeah my mistake, no otption for ht link multi, only freq, n no option for ht link volt setting. MSI still has these as far as i can remember, why not gaygaybyte? shud i use AOD instead? but thn evertime i OC, like if i set the bios for cpu vcore at 1.47v, n thn go into windows n open AOD, it willl read at the default volt(1.4v), same case goes to the cpu-nb volt. but AOD alwat gets the cpu freq ryte( so does cpu-z
) |
|
|
Jul 23 2010, 09:12 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(selferino @ Jul 23 2010, 09:04 PM) owh yeah my mistake, no otption for ht link multi, only freq, n no option for ht link volt setting. MSI still has these as far as i can remember, why not gaygaybyte? shud i use AOD instead? but thn evertime i OC, like if i set the bios for cpu vcore at 1.47v, n thn go into windows n open AOD, it willl read at the default volt(1.4v), same case goes to the cpu-nb volt. but AOD alwat gets the cpu freq ryte( so does cpu-z can't be... if ur not gettin what u see (after pressin ctrl + f1 in bios main page) as d ss posted, then something wrong with d bios. have u tried other version of bios? msi bios is decent but i'll take award bios anytime anyday if d board can match what i wanted. never trust aod as its compatibility differ from boards to boards. i trust cpu-z & hwm more. some more, u got easytune & d wattage monitor tool there w/ u, why not make use of it? ) |
|
|
Jul 23 2010, 09:17 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
as far as i know, AOD doesnt read the actual voltage
|
|
|
Jul 23 2010, 09:22 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 23 2010, 08:55 PM) Aisyemen bro, sedey reading ur post, if had extra moolah i bought the item back from u ive no regret buying ur mobo tho. at 1st i just want to buy another 1..but thinking of a HDD, i need to sell this mobo.. nvm..for this time being, i will use this mobo 1st.. kekeke Give it some time, i know someone gonna want that mobo QUOTE(selferino @ Jul 23 2010, 09:04 PM) owh yeah my mistake, no otption for ht link multi, only freq, n no option for ht link volt setting. MSI still has these as far as i can remember, why not gaygaybyte? shud i use AOD instead? but thn evertime i OC, like if i set the bios for cpu vcore at 1.47v, n thn go into windows n open AOD, it willl read at the default volt(1.4v), same case goes to the cpu-nb volt. but AOD alwat gets the cpu freq ryte( so does cpu-z basically there is 2 "vcore")cpu vid and cpu voltage CPU VID is the voltage that the proc demands.. non BE proc will permit 1.35vcore max only (depends on proc maybe).BE might go as far as 1.55v.. . normally shows as 1.3v, 1.35v like that...the exact value of vcore.. and another one is cpu voltage or any other name that similar (but not CPU vid) this always shows in +0.01v , + 0.02v like that la..showing increment.. so this cpu voltage will add up to the value of CPU VID... gigabyye (or atleast mine) dont have the option to alter the CPU VID..and AOD will detect the CPU VID..not the total amount of vcore (cpu vid + the increament) er..correct me im im wrong tho.. |
|
|
Jul 24 2010, 11:57 AM
|
Senior Member
2,655 posts Joined: Jan 2003 From: Kuala Lumpur
|
Errr guys.. any particular batch number that I should be paying attention when purchasing a 1090T BE for OC?
This post has been edited by ConquerorX: Jul 24 2010, 11:58 AM |
|
|
Jul 24 2010, 12:24 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ConquerorX @ Jul 24 2010, 11:57 AM) Errr guys.. any particular batch number that I should be paying attention when purchasing a 1090T BE for OC? Not that we know of, so far not may users of 1090T yet, 1055T seen quite a few already |
|
|
Jul 24 2010, 12:27 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
1090T not worth the price paid....its freaking RM300++ higher ~_~
|
|
|
Jul 24 2010, 12:31 PM
|
|
Senior Member
2,655 posts Joined: Jan 2003 From: Kuala Lumpur
|
Perhaps I should be getting a 965BE rather than 1090T?
|
|
|
Jul 24 2010, 12:47 PM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
You are better off with the 1050T
|
|
|
Jul 24 2010, 12:58 PM
|
Senior Member
7,740 posts Joined: Jun 2006 From: Some Yih
|
hi amd folks, its been a long time iv been here..
looking forward for amd's clan guidance for my problem : http://forum.lowyat.net/topic/1500823 please help |
|
|
Jul 24 2010, 01:33 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 24 2010, 12:27 PM) 1090T not worth the price paid....its freaking RM300++ higher ~_~ exactly bro, i'd rather spent those money on better coolin or ram... those hyper sticks look yummy... QUOTE(ConquerorX @ Jul 24 2010, 12:31 PM) Perhaps I should be getting a 965BE rather than 1090T? QUOTE(shinjite @ Jul 24 2010, 12:47 PM) You are better off with the 1050T support 110%... 1055t clocks better than 965be while bein slightly more expensive only... btw, i woke up this morning & saw this on my dining table... 
a message from santa clouds, he said if i'll be a gud boy, i can have d gift for FREE... 
& w/o further delay i opened up d box... can't wait to see what's inside...  » Click to show Spoiler - click again to hide... « woah!!! it's an early x'mas gift... thx santa!!!! then i put d gift into my trust worthy edisi spesial 690g board w/ dark brown pcb + converter (since am3 chip can't fit into am2 board)... » Click to show Spoiler - click again to hide... « finally, d torture begin... testin now so fingers crossed for what d gift from santa can do... |
|
|
Jul 24 2010, 01:48 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
got such thing as converter from am2 to am3??
|
|
|
Jul 24 2010, 01:54 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(pikacu @ Jul 24 2010, 12:58 PM) hi amd folks, its been a long time iv been here.. booting time normally related to harddisk.looking forward for amd's clan guidance for my problem : http://forum.lowyat.net/topic/1500823 please help i think there are less impact on what processor you are using, since either phenom ii x4 940 or sempron 140 also much faster than harddisk. |
|
|
Jul 24 2010, 06:07 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(pikacu @ Jul 24 2010, 12:58 PM) hi amd folks, its been a long time iv been here.. experienced that before..looking forward for amd's clan guidance for my problem : http://forum.lowyat.net/topic/1500823 please help but that is related to the DVD itself..buy another 64bit DVD and problem solve. » Click to show Spoiler - click again to hide... « QUOTE(dafreak @ Jul 24 2010, 01:48 PM) got such thing as converter from am2 to am3?? even if the socket can be convert and fit, the IMC cant be changed right?kekeke..@ah khoo aiyo... 955 with 6series change mobo happy stressing.. me also stressing but burn in purpose..so no new result..just wanted a lower volt for daily usage.. |
|
|
Jul 24 2010, 07:22 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 24 2010, 01:33 PM) exactly bro, i'd rather spent those money on better coolin or ram... those hyper sticks look yummy... :/drool: I sokong for the 1090T tho since no user in LYN yet, wanna see how it rawks support 110%... 1055t clocks better than 965be while bein slightly more expensive only... :/nod: btw, i woke up this morning & saw this on my dining table... :/stars: » Click to show Spoiler - click again to hide... « a message from santa clouds, he said if i'll be a gud boy, i can have d gift for FREE... :/P » Click to show Spoiler - click again to hide... « & w/o further delay i opened up d box... can't wait to see what's inside... :/idea: » Click to show Spoiler - click again to hide... « woah!!! it's an early x'mas gift... thx santa!!!! :/hyper: :/wub: then i put d gift into my trust worthy edisi spesial 690g board w/ dark brown pcb + converter (since am3 chip can't fit into am2 board)... :/lol: » Click to show Spoiler - click again to hide... « finally, d torture begin... testin now so fingers crossed for what d gift from santa can do... :/blush: Aiyooo bro the box looks , sometimes ah these postal workers |
|
|
Jul 25 2010, 01:36 AM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(ah_khoo @ Jul 23 2010, 03:03 PM) i always use customed blend test, min @ 8, max @ 4096, minute = 1 bro ah-khoo, do u enabled in place fft(tick or untick the box) ? btw, evertime i set the min to 8k, the 1st test will run at 1024k, 2nd test straight go to 8k, 3rd test go to 10k, 4th test only go to 896k, 5th test go to 768k but thn the next test go back way down to 12k. izzit like this in between one? i see u do ur prime always end wif 8k one, why my one liddat?anyways, wanna share my minimum under-volt using stock speed of my clock(from 1.4v to 1.25 )C!E and CnQ enabled 
This post has been edited by selferino: Jul 25 2010, 01:47 AM |
|
|
Jul 25 2010, 01:51 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
it's just the sequence of how the program runs....
|
|
|
Jul 25 2010, 04:09 AM
|
|
All Stars
19,319 posts Joined: Jan 2003 From: Klang
|
QUOTE(selferino @ Jul 25 2010, 01:36 AM) bro ah-khoo, do u enabled in place fft(tick or untick the box) ? btw, evertime i set the min to 8k, the 1st test will run at 1024k, 2nd test straight go to 8k, 3rd test go to 10k, 4th test only go to 896k, 5th test go to 768k but thn the next test go back way down to 12k. izzit like this in between one? i see u do ur prime always end wif 8k one, why my one liddat? Tick the FFT box if you are stressing your CPU insteadanyways, wanna share my minimum under-volt using stock speed of my clock(from 1.4v to 1.25 )C!E and CnQ enabled
For memory, untick the FFT box |
|
|
Jul 25 2010, 09:06 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
kinda silent here today..lemme update an SS.. kekeke..
not impressive but with 20mhz shoet, i able to tighten somemore.. |
|
|
Jul 26 2010, 04:20 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Bcoz this thread has been quite this few days, lemme post this, donno u guys read this b4 tho:
QUOTE ASRock Designs Six Core-Ready AM3 Motherboard Based on AMD 480X Chipset (circa 2007) ASRock is known for innovations in the motherboard industry that are borderline-wacky and defy the norm. For example, the socket AM2 motherboard based on the six year old NVIDIA nForce 3 chipset that supports Phenom II series (read here), or a socket 939 motherboard based on the more recent AMD 780G chipset (originally meant for AM2+/AM3 platforms) called the 939A785GMH-128M, or the numerous examples of older Intel 900 series chipsets supporting Core 2 processors. Perhaps this is ASRock's way of clearing new old-stock chipsets from manufacturers, by giving them a lease of life. The latest such creation is the M3A UCC.  This socket AM3 motherboard supports all AM3 processors including six-core ones, and DDR3 memory at speeds of up to 1800 MHz, is based on the AMD 480X, one of AMD's first discrete graphics chipsets after it took over ATI. The 480X was meant to be a value discrete graphics chipset with dual x8 lane CrossFire support. It is paired with the SB600 southbridge that gives out four SATA 3 Gb/s ports. Expansion slots include PCI-Express 1.1 x16, two PCI-E x1, and three PCI. Six channel audio, Gigabit Ethernet, USB 2.0, serial and parallel ports, make the rest of it. The UCC chip lets you unlock disabled cores on X3 and Phenom II X2 processors. The idea behind this product could be to deliver an inexpensive motherboard that just works. This further validates the point that any AMD chipset since nForce 3 can support any AMD desktop processor with IMC made till date, if motherboard vendors fine-tune their business interests to think more like ASRock. Linky Those crazy engineers at AsRock, always coming out with these kind of things |
|
|
Jul 26 2010, 04:23 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 26 2010, 04:20 PM) Bcoz this thread has been quite this few days, lemme post this, donno u guys read this b4 tho: y i found it useless? unless they offer the price that real cheap... like >rm150... otherwise i dont see reasons for ppl to buy..my opinion lah..Those crazy engineers at AsRock, always coming out with these kind of things |
|
|
Jul 26 2010, 04:40 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 26 2010, 04:23 PM) y i found it useless? unless they offer the price that real cheap... like >rm150... otherwise i dont see reasons for ppl to buy..my opinion lah.. Hahahaha, thats whylah, but still u have to admire them, taking a DDR only platform and fusing it with newer tech eg: DDR3, UCC etc.. But like u point it out tho, not gonna touch it unless they're selling them RM150 and below |
|
|
Jul 26 2010, 07:00 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 24 2010, 07:22 PM) I sokong for the 1090T tho since no user in LYN yet, wanna see how it rawks :/drool: :/P got bro, sir Louislkw still testing his i think... i'd rahter wait patient than to rush him for d results... Aiyooo bro the box looks :/sweat: :/sweat:, sometimes ah these postal workers :/x :/x i think still ok lah for d box, kemek abit only... i've seen worse trust me... thumbs up for d delivery time... never expect to receive d gift early in d morning on saturday... QUOTE(selferino @ Jul 25 2010, 01:36 AM) bro ah-khoo, do u enabled in place fft(tick or untick the box) ? btw, evertime i set the min to 8k, the 1st test will run at 1024k, 2nd test straight go to 8k, 3rd test go to 10k, 4th test only go to 896k, 5th test go to 768k but thn the next test go back way down to 12k. izzit like this in between one? i see u do ur prime always end wif 8k one, why my one liddat? small fft, min @ 8, max @ 512, minute @ 1, check box checked > test cpuanyways, wanna share my minimum under-volt using stock speed of my clock(from 1.4v to 1.25 :/) ) C!E and CnQ enabled
custom-ed test, min @ 8, max @ 4096, minute @ 1, check box unchecked > blend test a.k.a test everything blend test always starts w/ 1024, then small 8, 10 & so on... my ss always show 8 coz w/ d setting mentioned above, test manage to finish 1 round (actually slightly more) within an hour. that's why u always see 8 or 10 (or other small fft) when i capture d screen. QUOTE(kuntawakaw @ Jul 25 2010, 09:06 PM) kinda silent here today..lemme update an SS.. kekeke.. nice job there... now who's d pro...
not impressive but with 20mhz shoet, i able to tighten somemore.. me still havin hardtimes tamin d 955... i overestimated my kung fu this time... |
|
|
Jul 26 2010, 10:13 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 26 2010, 04:40 PM) Hahahaha, thats whylah, but still u have to admire them, taking a DDR only platform and fusing it with newer tech eg: DDR3, UCC etc.. the newer tech for older platform also might be useless..i dont think ppl that know much about computer still keep s939..and for those that still using s939 might not a computer freak and dont even bother newer tech at all..But like u point it out tho, not gonna touch it unless they're selling them RM150 and below QUOTE(ah_khoo @ Jul 26 2010, 07:00 PM) got bro, sir Louislkw still testing his i think... i'd rahter wait patient than to rush him for d results... when u take a look at the vdimm.. u might even take ur word back.. nice job there... now who's d pro... me still havin hardtimes tamin d 955... i overestimated my kung fu this time... 1.81..i think high enough for daily run.. 
my ram cooler but too big.. tonight will change to 2x 80mm cooler..kekeke. |
|
|
Jul 26 2010, 10:24 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 26 2010, 10:13 PM) the newer tech for older platform also might be useless..i dont think ppl that know much about computer still keep s939..and for those that still using s939 might not a computer freak and dont even bother newer tech at all.. Wow i thought ur cpu kuhler is senget or something rupanye its ur ram kuhler when u take a look at the vdimm.. u might even take ur word back.. 1.81..i think high enough for daily run.. » Click to show Spoiler - click again to hide... « my ram cooler but too big.. tonight will change to 2x 80mm cooler..kekeke. |
|
|
Jul 26 2010, 10:27 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
QUOTE(kuntawakaw @ Jul 26 2010, 10:13 PM) the newer tech for older platform also might be useless..i dont think ppl that know much about computer still keep s939..and for those that still using s939 might not a computer freak and dont even bother newer tech at all.. Wow. Is that your Gigabyte 770T UD3P with sap 4850? when u take a look at the vdimm.. u might even take ur word back.. 1.81..i think high enough for daily run..
my ram cooler but too big.. tonight will change to 2x 80mm cooler..kekeke. |
|
|
Jul 26 2010, 10:44 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 26 2010, 10:24 PM) Wow i thought ur cpu kuhler is senget or something rupanye its ur ram kuhler cant afford proper ram cooler belum gaji lol..was aiming for AC ram cooler.. but thinking i have to go north in couple of days that might consume few hundreds, i have to lupekan niat nk ram cooler..mobo pun kene lupekan QUOTE(clon12 @ Jul 26 2010, 10:27 PM) Wow. Is that your Gigabyte 770T UD3P with sap 4850? i really2 budget person... that is 4830.. kekeke..now 2nd @ rm200 while 4850 2nd hand @ >250 might reach 300..no point buying 4850 update.. they fit well 
This post has been edited by kuntawakaw: Jul 26 2010, 10:58 PM |
|
|
Jul 26 2010, 11:07 PM
|
Senior Member
1,094 posts Joined: Mar 2009
|
any 1 interested my DFI boarD?
|
|
|
Jul 26 2010, 11:33 PM
|
|
Senior Member
2,911 posts Joined: Mar 2009
|
Hahaha cause your 4830 is almost similar to mine 4850
and so does the mobo XDAdded on July 26, 2010, 11:33 pmHahaha cause your 4830 is almost similar to mine 4850 and so does the mobo XDThis post has been edited by clon12: Jul 26 2010, 11:33 PM |
|
|
Jul 27 2010, 11:15 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(clon12 @ Jul 26 2010, 11:33 PM) Hahaha cause your 4830 is almost similar to mine 4850 yeah..except the price..kekeke.. and so does the mobo XD@any ram master esp ah_khoo 
left is now setting.. right is few days ago setting.. y i saw some gone slower.. as pic, the timing is greatly tightened..any other same setting.. normally i run the benchmark for 2 times and more.. so that i can say the app not influenced by uncertain factor (like cpu and mem on load that might affect the reading accuracy) i just run some MS word that i dont think might effect the reading.. |
|
|
Jul 27 2010, 12:05 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Haiyahhh so very the tension, ah_khoo i take back all my intended goals already, this is the besh i could do for now:
 » Click to show Spoiler - click again to hide... « Just forget about the ram speed, donno why with this X6 my ram cannot even run at 1.4ghz regardless of the ram volt i pump, it will always causes one of the core to get an error during priming.. Maybe its a sign from high above that i should not mix high oc with this cheapo KVR Hate the cpu volt also, donno why with the ahsos board set whatever volt it will always overvolt I set 1.4v actually but during priming it would sometime shoot up to 1.45v |
|
|
Jul 27 2010, 12:08 PM
|
Junior Member
139 posts Joined: May 2009
|
QUOTE(babyyi @ Jul 26 2010, 11:07 PM) any 1 interested my DFI boarD? pm me ur price if u wish to sell |
|
|
Jul 27 2010, 01:10 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 27 2010, 11:15 AM) yeah..except the price..kekeke.. me ram idiot... 2k rated sticks i only managed a 1.82xk only... great job there... 1333 @ near 1600 @ 7-8-7... what's d vdimm? is it 1.8v as mentioned b4... can't be d9 in disguise coz d9 should have no issue doin 7-7-7 all d way? how high u can go @ 7-7-7? @any ram master esp ah_khoo
left is now setting.. right is few days ago setting.. y i saw some gone slower.. as pic, the timing is greatly tightened..any other same setting.. normally i run the benchmark for 2 times and more.. so that i can say the app not influenced by uncertain factor (like cpu and mem on load that might affect the reading accuracy) i just run some MS word that i dont think might effect the reading.. again mat rempit like me doesn't care d benchy no... QUOTE(cloudwan @ Jul 27 2010, 12:05 PM) Haiyahhh so very the tension, ah_khoo i take back all my intended goals already, this is the besh i could do for now: haiya... u seems to have less luck most of d time bro... nevermind, there's always next time... especially d 95watter... » Click to show Spoiler - click again to hide... « Just forget about the ram speed, donno why with this X6 my ram cannot even run at 1.4ghz regardless of the ram volt i pump, it will always causes one of the core to get an error during priming.. :/stars: Maybe its a sign from high above that i should not mix high oc with this cheapo KVR :/lol: Hate the cpu volt also, donno why with the ahsos board set whatever volt it will always overvolt :/x I set 1.4v actually but during priming it would sometime shoot up to 1.45v :/stars: :/sweat: as for d ram, have u tried ganged mode? i know it mite not be d issue but noob like me will try almost everything i can think of b4 i give up. it worked when i was on 790fxt back then. from what u mentioned even change of ram slot doesn't help rite? could be imc issue... dark sticks can do 18xx w/ 635 on 690g but it's diff w/ d 955 (even on d same board), guess what they say is right (that chip w/o l3 cache can push ram [in some case nb freq too] better). i'm too tired w/ d infinite reboot @ high clocks, gonna stop else i mite kill my wd black & blue... ermm... it's a sign that u need a pair of decent ram so that u can push those sticks until u forget bout d cpu clocks. team dark 2k (i saw someone sellin d lower volt [1.6v, my fren's is 1.65v]) + a 'lil top up for d 955 for u bro? This post has been edited by ah_khoo: Jul 27 2010, 01:56 PM |
|
|
Jul 27 2010, 02:19 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 01:10 PM) haiya... u seems to have less luck most of d time bro... nevermind, there's always next time... especially d 95watter... hmmm haven't tried unganged mode yet, i tried & tried with different settings until 2am yesterday almost make me wanna vomit bcoz oc'ing as for d ram, have u tried ganged mode? from what u mentioned even change of ram slot doesn't help rite? could be imc issue... dark sticks can do 18xx w/ 635 on 690g but it's diff w/ d 955 (even on d same board), guess what they say is right (that chip w/o l3 cache can push ram [in some case nb freq too] better). i'm too tired w/ d infinite reboot @ high clocks, gonna stop else i mite kill my wd black & blue... ermm... it's a sign that u need a pair of decent ram so that u can push those sticks until u forget bout d cpu clocks. team dark 2k (i saw someone sellin d lower volt [1.6v, my fren's is 1.65v]) + a 'lil top up for d 955 for u bro? Will try again if i can muster up some semangat tday Huh? What do u mean bro? I need to top up or the 955 buyer will topup? |
|
|
Jul 27 2010, 02:29 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 02:19 PM) hmmm haven't tried unganged mode yet, i tried & tried with different settings until 2am yesterday almost make me wanna vomit bcoz oc'ing woah....that's d spirit bro, me can't afford to do that coz i can't just stay at my fren's house until late morning... later i reach home my wife ask me to sleep outside d bed room Will try again if i can muster up some semangat tday Huh? What do u mean bro? I need to top up or the 955 buyer will topup? i gave up ledi to be honest... should d chip get gud offer, it's gonna be team dark 2k lv (1.6v, not 1.65v) + some cash (around $10~$20) = ya 955BE, what say u bro? This post has been edited by ah_khoo: Jul 27 2010, 02:32 PM |
|
|
Jul 27 2010, 02:39 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 02:29 PM) woah....that's d spirit bro, me can't afford to do that coz i can't just stay at my fren's house until late morning... later i reach home my wife ask me to sleep outside d bed room Arghhhhhhh racun, racun.. huhuhu... i gave up ledi to be honest... should d chip get gud offer, it's gonna be team dark 2k lv (1.6v, not 1.65v) + some cash (around $10~$20) = ya 955BE, what say u bro? Pening already.. Seems naise if it's possible |
|
|
Jul 27 2010, 02:45 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 02:39 PM) Arghhhhhhh racun, racun.. huhuhu... fingers crossed bro, i mite not gud in oc, but i'm pretty good in sellin/buyin... should consider change of career eh? Pening already.. Seems naise if it's possible will update u tonite... |
|
|
Jul 27 2010, 02:50 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
keep hearing this team dark OC, wut izzit eh, Gskill rams?
|
|
|
Jul 27 2010, 02:56 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
it's TEAM ler..
Added on July 27, 2010, 2:57 pmi ada bau X6 dgn sate.. This post has been edited by 8tvt: Jul 27 2010, 02:57 PM |
|
|
Jul 27 2010, 03:00 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
x penah ak dgr TEAM rams.... wuuu, cloudwan ade x6, 125watter ke 95watter 2???
|
|
|
Jul 27 2010, 03:03 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
TEAM actually is ok.. just that not many promotions like kingston or apacer..
|
|
|
Jul 27 2010, 03:10 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(8tvt @ Jul 27 2010, 02:56 PM) it's TEAM ler.. X6 dengan sate? Don't tell me to cook sate on my X6 bro Added on July 27, 2010, 2:57 pmi ada bau X6 dgn sate.. QUOTE(selferino @ Jul 27 2010, 03:00 PM) x penah ak dgr TEAM rams.... wuuu, cloudwan ade x6, 125watter ke 95watter 2??? X6 125watter la bro, no luck finding the 95watter, plus i didn't buy the cpu at lowyat, it was more an impulsive buy during pcfair at my hometown BP Soooo not much choice there, i was actually building up a pc for a friend that day but suddenly terbuy something for myself plak Added on July 27, 2010, 3:12 pm QUOTE(ah_khoo @ Jul 27 2010, 02:45 PM) fingers crossed bro, i mite not gud in oc, but i'm pretty good in sellin/buyin... should consider change of career eh? Not just fingers, i'm even crossing my legs if must know will update u tonite... BTW bro, i am finding it hard to find any details of the Team Dark 2k LV ah, only find the 1.6k version, is it the same? This post has been edited by cloudwan: Jul 27 2010, 03:12 PM |
|
|
Jul 27 2010, 03:13 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 27 2010, 02:56 PM) it's TEAM ler.. performance ram is what he lacked of now bro, thuban = checked, luxury board in CHIV = checked, performance ram in Team Dark 2K LV CAS 9 = soon to be checked... Added on July 27, 2010, 2:57 pmi ada bau X6 dgn sate.. i dunno whether i'm responsible for all these upgrades, if i do, i do hope bro cloudwan forgive me... QUOTE(selferino @ Jul 27 2010, 03:00 PM) x penah ak dgr TEAM rams.... wuuu, cloudwan ade x6, 125watter ke 95watter 2??? it's a 125watter. thuban is nice regardless 95 or 125watter... |
|
|
Jul 27 2010, 03:14 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
2 sticks of dark TEAM well done grilled is enough..
why ler not wait 95watter.. |
|
|
Jul 27 2010, 03:16 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 03:13 PM) performance ram is what he lacked of now bro, thuban = checked, luxury board in CHIV = checked, performance ram in Team Dark 2K LV CAS 9 = soon to be checked... I will never forgive u bro, i dunno whether i'm responsible for all these upgrades, if i do, i do hope bro cloudwan forgive me... it's a 125watter. thuban is nice regardless 95 or 125watter... i sumpah u will makan meggi like me smpi we get rich someday |
|
|
Jul 27 2010, 03:22 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(8tvt @ Jul 27 2010, 03:14 PM) 2 sticks of dark TEAM well done grilled is enough.. Can't wait bro coz it was a one shot chance to buy the X6 made available from some minor profit of building up a friend pc & some repair works done to some of my office pc..why ler not wait 95watter.. It's all in the claims, I can't take the moneyh so i chose the goods |
|
|
Jul 27 2010, 03:24 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 03:10 PM) Not just fingers, i'm even crossing my legs if must know got leh bro, here is d link:BTW bro, i am finding it hard to find any details of the Team Dark 2k LV ah, only find the 1.6k version, is it the same? PC3 16000 DDR3 LV 2000 MHz CL9 (2*2GB) from what i know: 1600 lv CAS 7 (1.65v) 2000 lv CAS 9 (1.65v & latest version is 1.60v) QUOTE(cloudwan @ Jul 27 2010, 03:16 PM) I will never forgive u bro, lol... u no need to sumpah i already eatin maggie mi every day... u sumpah lagi i can only eat biskut w/ milo... i sumpah u will makan meggi like me smpi we get rich someday get rich someday??? like that i need to start buyin ekor ledi... This post has been edited by ah_khoo: Jul 27 2010, 03:44 PM |
|
|
Jul 27 2010, 03:44 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 03:24 PM) got leh bro, here is d link: Erkkkkk why didn't i find that link, or is it bcoz i was too busy looking for the name team dark PC3 16000 DDR3 LV 2000 MHz CL9 (2*2GB) lol... u no need to sumpah i already eatin maggie mi every day... u sumpah lagi i can only eat biskut w/ milo... get rich someday??? like that i need to start buyin ekor ledi... Hahahaha then no need for to sumpah lor, only need to wait till we kena nombor or something, but then again how am i gonna kena nombor if i never buy Looks nice but i always pening with some ram manufacturer, why oh why if they already knew the gonna kaler the ramsink black can't they make the ram pcb black too |
|
|
Jul 27 2010, 03:49 PM
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
black expensive so cut cost la.. haha
|
|
|
Jul 27 2010, 04:17 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(8tvt @ Jul 27 2010, 03:49 PM) black expensive so cut cost la.. haha Ya ka? I thought the green color is also just coloring? So expensive meh just to use black coloring instead of green? |
|
|
Jul 27 2010, 04:20 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 04:17 PM) Ya ka? I thought the green color is also just coloring? So expensive meh just to use black coloring instead of green? u can oc 'em until hangus or just spray d pcb black if havin black pcb ram is a must bro... |
|
|
Jul 27 2010, 04:44 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 04:20 PM) u can oc 'em until hangus or just spray d pcb black if havin black pcb ram is a must bro... Hahahaha, no need, got some black magic marker back at home, i can just paint2 using them |
|
|
Jul 27 2010, 06:19 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
this team dark, same brand as those TEAM ELITE ramsticks eh? the rams wif heatsinks. btw,their ddr3 1333 cl9 vs KVR ddr3 1333 cl9,which is better? or they r the same?
btw if just OC ram, playing around wif the latency, wut settings shud i check/uncheck, fft min/max size in prime95(bro ah_khoo, if u can answer this, would be nice )This post has been edited by selferino: Jul 27 2010, 06:23 PM |
|
|
Jul 27 2010, 07:39 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 04:44 PM) Hahahaha, no need, got some black magic marker back at home, i can just paint2 using them magic pen tu zaman kite org bro... dorang still pakai magic pen ke? QUOTE(selferino @ Jul 27 2010, 06:19 PM) this team dark, same brand as those TEAM ELITE ramsticks eh? the rams wif heatsinks. btw,their ddr3 1333 cl9 vs KVR ddr3 1333 cl9,which is better? or they r the same? Team Elite is better, bro kunta proved that. if u can get 1600 version better, very impressive but nothing guaranteed as value ram is more of lucky draw... btw if just OC ram, playing around wif the latency, wut settings shud i check/uncheck, fft min/max size in prime95(bro ah_khoo, if u can answer this, would be nice ) i will use blend test for ram testing... min @ 8, max @ 4096, minute = 1, ram size = half of total physical mem. |
|
|
Jul 27 2010, 09:22 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 27 2010, 01:10 PM) me ram idiot... 2k rated sticks i only managed a 1.82xk only... great job there... 1333 @ near 1600 @ 7-8-7... what's d vdimm? is it 1.8v as mentioned b4... can't be d9 in disguise coz d9 should have no issue doin 7-7-7 all d way? how high u can go @ 7-7-7? yeah...1.8vdimm in bios 1.81vdimm by hwmonitor.. again mat rempit like me doesn't care d benchy no... 7-7-7 with this setting will make it refuse to reboot.. later i try with 7-7-7.. ok..enough 1month play with same HW.. need change.. hope got ppl intrested in my mobo soon.. i think i pushed enough.. nk gak jadi mcm abg cloudwan, asek tukar..his PC is the most powderful now..here.. accept the memory la but soon to be right?kekekekAdded on July 27, 2010, 9:28 pm QUOTE(ah_khoo @ Jul 27 2010, 07:39 PM) i will use blend test for ram testing... min @ 8, max @ 4096, minute = 1, ram size = half of total physical mem. so ka? cuz i always use large >custom > 3mins (since sometimes i found 1min not enough to stress.. or 2mins if want to make it quick..)so it will become min@8, max@1024, in place FTT and 3min.. will try ur suggestion.. which detects faster.. This post has been edited by kuntawakaw: Jul 27 2010, 09:28 PM |
|
|
Jul 27 2010, 09:34 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 27 2010, 09:22 PM) yeah...1.8vdimm in bios 1.81vdimm by hwmonitor.. Apa plak kawe, rame lagi ah lagi powderful, beza cume kawe slalu sepam 7-7-7 with this setting will make it refuse to reboot.. later i try with 7-7-7.. ok..enough 1month play with same HW.. need change.. hope got ppl intrested in my mobo soon.. i think i pushed enough.. nk gak jadi mcm abg cloudwan, asek tukar..his PC is the most powderful now..here.. accept the memory la but soon to be right?kekekekAdded on July 27, 2010, 9:28 pm so ka? cuz i always use large >custom > 3mins (since sometimes i found 1min not enough to stress.. or 2mins if want to make it quick..) so it will become min@8, max@1024, in place FTT and 3min.. will try ur suggestion.. which detects faster.. Nothing for certain bro, it depends on quite a lot of things like got money or not to buy rams plak, nanti makan megi 24/7 kang |
|
|
Jul 27 2010, 09:46 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 27 2010, 09:34 PM) Apa plak kawe, rame lagi ah lagi powderful, beza cume kawe slalu sepam makan megi 24/7 eh? lpas makan, makan lg..makan lg..24jam makan je..kekeke Nothing for certain bro, it depends on quite a lot of things like got money or not to buy rams plak, nanti makan megi 24/7 kang what happend to ur evo? kalau ade...ape salah tolak kat saye.. kali ni bayar abis |
|
|
Jul 27 2010, 09:58 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kuntawakaw @ Jul 27 2010, 09:46 PM) makan megi 24/7 eh? lpas makan, makan lg..makan lg..24jam makan je..kekeke Hahahaha, itu evo suda beli & suda bayar, pastu kena racun bro 8tvt trus pulang balik angkat itu CIV lor what happend to ur evo? kalau ade...ape salah tolak kat saye.. kali ni bayar abis |
|
|
Jul 27 2010, 10:23 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 27 2010, 09:22 PM) yeah...1.8vdimm in bios 1.81vdimm by hwmonitor.. try w/ 1.8xv @ 7-7-7, see how high it can go. u got active coolin there, won't hurt if u just prime it for an hour or 2... 7-7-7 with this setting will make it refuse to reboot.. later i try with 7-7-7.. ok..enough 1month play with same HW.. need change.. hope got ppl intrested in my mobo soon.. i think i pushed enough.. nk gak jadi mcm abg cloudwan, asek tukar..his PC is the most powderful now..here.. accept the memory la :/sweat: :/sweat: but soon to be right?kekekek Added on July 27, 2010, 9:28 pm so ka? cuz i always use large >custom > 3mins (since sometimes i found 1min not enough to stress.. or 2mins if want to make it quick..) so it will become min@8, max@1024, in place FTT and 3min.. will try ur suggestion.. which detects faster.. yalor, jeles tengok bebrg high end abg cloudwan aka santa cloud... QUOTE(kuntawakaw @ Jul 27 2010, 09:46 PM) makan megi 24/7 eh? lpas makan, makan lg..makan lg..24jam makan je..kekeke bab tu dorang kate mee maggi cepat dimasak sedap dimakan, can cook anytime & be eaten many2 times... i'm oso d regular btw... what happend to ur evo? kalau ade...ape salah tolak kat saye.. kali ni bayar abis QUOTE(cloudwan @ Jul 27 2010, 09:58 PM) Hahahaha, itu evo suda beli & suda bayar, pastu kena racun bro 8tvt trus pulang balik angkat itu CIV lor :/x :/lol: :/P bro, it was a great deal so no regret, to me at least. if only i'm stayin there & have d |
|
|
Jul 27 2010, 10:45 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 10:23 PM) try w/ 1.8xv @ 7-7-7, see how high it can go. u got active coolin there, won't hurt if u just prime it for an hour or 2... ;/) Huh satu lagi, what high end mahal skit jer, not like i went for a aiseben ke apa yalor, jeles tengok bebrg high end abg cloudwan aka santa cloud... :/wub: :/blush: :/cry: bab tu dorang kate mee maggi cepat dimasak sedap dimakan, can cook anytime & be eaten many2 times... i'm oso d regular btw... :/P bro, it was a great deal so no regret, to me at least. if only i'm stayin there & have d Yup, it's a one in a kind deal, not so many time that we can find offer like that, the price plak was sooo hard to resist My 1st time using highend mobo bro, u suda brapa kali dapat, let me enjoice for once lah, hahahaha |
|
|
Jul 27 2010, 10:56 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 27 2010, 09:58 PM) Hahahaha, itu evo suda beli & suda bayar, pastu kena racun bro 8tvt trus pulang balik angkat itu CIV lor itu otromen mmg..poison kuat tp die immune QUOTE(ah_khoo @ Jul 27 2010, 10:23 PM) try w/ 1.8xv @ 7-7-7, see how high it can go. u got active coolin there, won't hurt if u just prime it for an hour or 2... ive been torturing these sticks quite alot.. prime before sleep..so around 5-7 hours of prime.. but depends la..sometimes fail so not reach 5hours.. yalor, jeles tengok bebrg high end abg cloudwan aka santa cloud... bab tu dorang kate mee maggi cepat dimasak sedap dimakan, can cook anytime & be eaten many2 times... i'm oso d regular btw... bro, it was a great deal so no regret, to me at least. if only i'm stayin there & have d if quick prime, it will as long as 1 ep of J-dorama..around 40mins.. u think will degrade? kekeke.. not gila like antonio..push more then 2.0vdimm.. is the fast degradation lead to the slower result i posted? will try later.. these few days i have lotsa work.. so cant tahan sabar kalau selalu restart/bsod.. if tighten slowly and large stress, the possibility for system to restart is low.. fail only..if fail still ok..can tahan,, edit: i dont think it degrade.. even high vdimm.. i can say with those fans, the rams run cool..1.8v also not that high i guess.. only 0.3v increment... anyone? if someone say that is high, then i have to lower it down lah This post has been edited by kuntawakaw: Jul 27 2010, 11:04 PM |
|
|
Jul 27 2010, 11:06 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 10:45 PM) Huh satu lagi, what high end mahal skit jer, not like i went for a aiseben ke apa ala... ade aje alasan, kalu ati dah nekad nak upgrade, ape buleh buat kang? Yup, it's a one in a kind deal, not so many time that we can find offer like that, the price plak was sooo hard to resist My 1st time using highend mobo bro, u suda brapa kali dapat, let me enjoice for once lah, hahahaha me where got high end board, xkan 690g pong kire high end meh? reply me pm leh... QUOTE(kuntawakaw @ Jul 27 2010, 10:56 PM) itu otromen mmg..poison kuat tp die immune 1.8v only still ok lah i think, some more u actively cool 'em. it's been a while since i actively cool my ram... ive been torturing these sticks quite alot.. prime before sleep..so around 5-7 hours of prime.. but depends la..sometimes fail so not reach 5hours.. if quick prime, it will as long as 1 ep of J-dorama..around 40mins.. u think will degrade? kekeke.. not gila like antonio..push more then 2.0vdimm.. is the fast degradation lead to the slower result i posted? will try later.. these few days i have lotsa work.. so cant tahan sabar kalau selalu restart/bsod.. if tighten slowly and large stress, the possibility for system to restart is low.. fail only..if fail still ok..can tahan,, yup, restart is d most annoyin thingy one could have in primin... especially when u have a quite new hdd... |
|
|
Jul 27 2010, 11:14 PM
|
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 27 2010, 11:06 PM) ala... ade aje alasan, kalu ati dah nekad nak upgrade, ape buleh buat kang? Hahahahaha, tau xper, 690G tuh mobo skrg bro, yg dulu apa cerite, DFI 790FX lah, MSI GD70 lah.. Kira highend lah tuh me where got high end board, xkan 690g pong kire high end meh? reply me pm leh... 1.8v only still ok lah i think, some more u actively cool 'em. it's been a while since i actively cool my ram... yup, restart is d most annoyin thingy one could have in primin... especially when u have a quite new hdd... Yup when oc'ing the one thing i really hate was the restart etc, my old benching hdd alredy been donated to charity, thinking of looking for any 2nd hand cheapo 80~160gb hdd for benching |
|
|
Jul 27 2010, 11:52 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 27 2010, 11:06 PM) 1.8v only still ok lah i think, some more u actively cool 'em. it's been a while since i actively cool my ram... yup, restart is d most annoyin thingy one could have in primin... especially when u have a quite new hdd... QUOTE(cloudwan @ Jul 27 2010, 11:14 PM) Yup when oc'ing the one thing i really hate was the restart etc, my old benching hdd alredy been donated to charity, thinking of looking for any 2nd hand cheapo 80~160gb hdd for benching but what to do.. have to endure it.. if take it slow and steady, getting bored pulak since too slow.. if leap too far getting annoyed since countless restart.. ah khoo.. tried 7-7-7..and any other subtiming same as before.. 155Xmhz also show signs of instability.. CCC refuse to start.. firefox sudden crash.. and i dont even bother to prime.. so before it restarts, i restart 1st..ekkekeke.. |
|
|
Jul 28 2010, 01:00 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
hey, anyone here know how to set, when bsod occur, don't restart instantly?
i want to see the blue screen error code, but it instantly restart, so i cannot see. |
|
|
Jul 28 2010, 01:22 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
QUOTE(saturn85 @ Jul 28 2010, 01:00 PM) hey, anyone here know how to set, when bsod occur, don't restart instantly? that one shud be temp related, or not enuf volt pumped into the proc, correct me if im wrong sifus i want to see the blue screen error code, but it instantly restart, so i cannot see. |
|
|
Jul 28 2010, 01:54 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(selferino @ Jul 28 2010, 01:22 PM) that one shud be temp related, or not enuf volt pumped into the proc, correct me if im wrong sifus haha, maybe. but i just want it to stop at the blue screen, don't restart first lo. |
|
|
Jul 28 2010, 01:59 PM
|
|
Senior Member
1,219 posts Joined: Jul 2009
|
so far OCing(n undervolting) ive encounter 2 type of bluescreen, one says that "bla3 hardware failure", another one(this happens when i was undervolting) was "bla3 clock generated error", both BSOD look alike but first line are different, the second one i solved by adding more cpu volt( you shud have guess coz im undervolting when getting this error)
|
|
Topic ClosedOptions
|
| Change to: |  0.2295sec
 0.54
 6 queries
 GZIP Disabled
Time is now: 1st December 2025 - 01:10 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.