googling P95 will result the P95 then since this app is famous..
btw..here u go

http://files.extremeoverclocking.com/file.php?f=103

guys

A-Data With heat Sink DDR3-1600 - RM229

from cycom pricelist is what model eh? value line of A data or what?
currently looking for ram.. but max budget is only RM320..
looking either 2gb kit or 2gb single stick.. what u all might recommend?
kvr i pass..

since i asking in OC tered..that is y..
kvr performance in quite known edi...
wud like to try other ram.. must not be Hp only..but not KVR la..kekeke

with limited budget, that is y im not aiming for any 4gb kit..kekeke..

older PC gave to adek already.. (its a waste since he play Sims / Cs / RA and few other old games..
and current PC will be assigned to torrent after this..
so i need another 1.. thinking of the money involve is not so much for those sempron..so ok la..that mobo also temporary only.. later if stable financially will upgrade..

how about team elite? gskill value what ramchip eh bro 8tvt? hope not relabeled.

@antonio
ur birthday yesterday eh?
tanjobi omedeto..kekekek.

@cloudwan.. ur old gigabyte is my new gigabyte lol..

done stressing the ram pair.. just with the same timing with diff vdimm and freq.. not a total let down la.. later update result.


1.66vdimm...


1.68vdimm

1.7vdimm but fail..no time to tweak further.. later cont

not so great.. subtiming all remains as SPD.. except few like twtr, read to read and few other i loosen up..
so far that is the best with my current noobish skill.. and also 700series mobo..
1600mhz is nowhere to be reach even with cl10.. annoyed.

p/s: tell me if image not clear..since using old CRT, i cant read..mybe u all can..kekeke

This post has been edited by kuntawakaw: Jul 12 2010, 12:21 PM

this pair is really pocket frenly.. rm290 total.. even KVR selling at 150++ and i know tweaking KVR will be sucks..

1600mhz not sighted anywhere.. Sg selling how much there unker?
mebbe i settle with these rams only... with my current salary, i might have stop OC..

considering the average wage over there is far higher compared to here, that 159$ is ok right..

these module kindda hot.. near to tracer.. so i afraid to put more vdimm..last time 1.8v still not sked.. now only limit myself for 1.7v.. later need hang fan there and push further..i hope can la.

80mm fan ngam2 can be hanged using the mobo/ casing hole..
need to find some bling2 fan 1st..kekeke..all left is black fan only

i rather dip em.. more efficient..kekkeke

u know how hot it is...my team elite is abit lower only..so afraid to push more

btw i think that tracer able to run 1066mhz cl5 / 800mhz cl4 with 1.9vdimm perfectly fine..
i strongly think la..mebbe ur ram cannot..

---

Added on July 13, 2010, 12:00 pmyeah..that ram kindda suck is want to "OC" it.. i think last time max i can go is around 1020mhz...but not using 1066 divider..

if using 1066 divider, kacang2 can do 1066mhz.. no alter anything else..
kalau saya tidak silap, saya ada run 4sticks 1066mhz..kalau xsilap la..

This post has been edited by kuntawakaw: Jul 13 2010, 12:00 PM

so ka?
when my tracer was used, it was active cooled.. so running 1066mhz all the time so never have issue of freeze because of heat. (and im pretty sure it was with 1.9v only..)
at that time.. i was noober then now..so my SS all sucks.. some SS just show CPUZ main tab only.. some memory only..so donno which one tracers SS..only have SS with 4sticks prime fail.. kekeke

---

Added on July 14, 2010, 11:09 am+ heatspreader also right?kkekekeke

This post has been edited by kuntawakaw: Jul 14 2010, 11:09 AM

yeah..that tut is good to pair with dom GT... or tracer red.. kekeke..

i dont have much time to play like u all.. and also no hw as good as u all also..but ah khoo, can rate G-skill eco? since u always read here and there, sure u know abit.. i wonder how it will perform with 1.6vdimm (since the lowest my mobo able to set)

got eh bbse on eco? i tot eco quite cheap ram.. and bbse on premium ram one..

still if regor have quite a strong imc, the mobo still holding me back.. just imagine 158Xmhz cl7 stable..but 1600mhz is absolutely not stable ( i able to prime 8mins last time, now boot also cant) even with cl9..

tried with cl6..disappointing, cant even get 1300mhz, 127Xmhz max... after all that is value ram.. thats y considering other ram..


WTB 1week team elite anyone?kekeke

This post has been edited by kuntawakaw: Jul 19 2010, 11:26 AM

gip free kenot..trade with tut can la..kekekek.. no topup2

later since now at workplace... aod ss can unker? since i really hate play with cpu tweaker.. last time my ehem2 edition of win7 always change to basic color scheme once open cpu-tweaker..so i always use AOD for advance timing tweaking..

u sure knowledgeable eh unker.. all ram know what chip.. i seldom read now..since quite bz + no internet at home.. so ketingalan zaman abit..
now always heard elpida and micron only.. qimonda not perform well ka? kekeke since i saw on winova value ram.. kekeke...

tarik balik...not yet to sell..have to change mobo 1st to unleash the ram true performance..kekekeke..
870 giga or asrock? tight budget..only can settle for less then 400...

unker..here u go..
1600mhz passed tho..but with hell of vdimm and loose timing..
need to increase 0.8vdimm for few mhz..



both same setting..just another 1 is with AOD open..

---

Added on July 20, 2010, 10:51 amlol at bolded..

from this

Athlon 4600+F3 | 3450Mhz | AMDAthlon |Abit AX78 | OCZ DDR2 6400 | 850Mhz | 4-4-4-12-16 | AMD Stock Cooler

this is our TS lyn nick.. not the proc name...kekekek
no offense bro, just u make me giggle.. kekekek

This post has been edited by kuntawakaw: Jul 20 2010, 10:51 AM

before yesterday i tot i was done playing with my modules..but unker's word yesterday triggerd me.. so i active cooled these rams and push further.. carik2 dlm laci ade lebih2 yate loon 80mm..kekeke..

nape? nk beli betul ke?kekeke..
too many ahsus evo user here and all bising2 about the vdroop.. iinm 870 giga also able to CF right? but now priority goes to ram oc only.. ( cpu not im mood to OC.. know the limit edi + using stock cooler only now )..

i was thinking trying low profile Hw only.. so asrock quite low profile here.. but thinking later hard to sell back.. susah pulak..
the giga..
the blue PCB match my taste..so thinking of it..kekeke.. later if got more moolah then sell off la..1 month torture and sell off with rm50 off still marketable..right?kekeke

isnt it the load line calib will make the vcore drop during load that even worse with it off..right?
CF..hmm.. thinking bout it since have 2x 4830..but none of my PSUs support that..so ill ditch CF anyway.. PWMsink, also dont care since have ramsinks spare..

300htt is awesome edi.. even with discrete GC.. around 330ht hard to push edi..or if u have more skill and better HW, can go around 350 (ive seen few cases of ppl here able to go this far, donno oversea forum since not read much nowadays)

want more? buy BE instead..kekekeke.

p/s
anyone comment me with my previous SS..about the sub timing.. esp unker ah khoo..anything need to be loosen that will drastically improve ability to push the freq? leave comment tomorrow ill reply..thanks

This post has been edited by kuntawakaw: Jul 20 2010, 12:09 PM

the CR is always 2t if i want it stable with 1600mhz.. 1t need to add another notch of vdimm.. so i settle with 2t anyway..
those 2 delays i loosened edi.. from 3 (with divider 1333 / 1066) to 4.. if using 1600 divider, auto already at 4 so i dont bother loosen it some more.. since i notice it affect the read and write on everest quite alot... i dont want just high speed but ultra loose timing..

how about the R-to-W dqs cont? i loosen i gain extra speed according to everest..donno the reading true or not..
auto normally at 5 or 4..i loosen to 6 or 8..
anyway ill try posting the cpu tweaker SS tomorow..todays not bring any SS to workplace..so cant post..slightly improve the timing with 1600 divider..

is there any other software to run benchmark on ram only? (and ofkos IMC included but not CPU, or atleast have separate result of ram and cpu just like everest )

---

Added on July 21, 2010, 11:16 amthat software pelik...
1st time open, hide in systray..need to right click >show baru keluar
2nd time and so on i need to open the software 2 times.. and right click >show baru keluar..
kalau x, sorok2 lg die..kekekek..

so all recommend me ahsos eh for the ram tweak.. will do some homework after this.. once get paid, straight away buy new mobo..




This post has been edited by kuntawakaw: Jul 21 2010, 11:16 AM

ok..since u said evo wins in mem tweaking, ill take it.. hope can get it with this upcoming salary.. if not..need to wait another month la..

dont be too humble bro.. im too noob in ram OC..so need ur guidance..kekeke
i want to reach 1600mhz need to sacrifice alot of timing.. if loosen the main timing, xlawa.. if alter the sub timing, no one knows if no AOD/cpu tweaker included
that is why need to see which faster..

and isnt d9gmh is ddr2 64mb/chip ramchip? or im getting older..kekeke

jgn mara..wa men2 je..kekke.. once i get paid, will transfer to u in no time

ya..miss that biostar.. regret i let it go for such a cheap price.. buyer offer 300 i dont want..i want only 270..kekekke..

eh..excuse me sir, how come u involved with this matter? i dont recall in debt with u..kekekeke..hutang budi got la..kekeke..

giga 770ud3p anyone?kekekek

tighter timing..

and this is the AOD..

doubt can push even more..need change mobo 1st

whoaahh..finally, screamyx finish the installation edi.. after 2months of subscribing..