ok for p55 rated rams

say if its a 2133 CL9... it will be equal to a 2000 CL9 on x58

i havent clocked amd yet but is intel p55 rated rams = same voltage on AMD??

The rated vdimm not work for AMD.. its required abit of juicec, 1.65v just didnt work for AMD..

Rated spec pop errors during memtest86, need to pump some juice to run another round of memtest86 otherwise I got a lemon again..

Amd can oc until 2k mhz over?

if u thinking to clock ram with AMD..u might end up with dissapointment.
if as usual, u want to analyze, come come.. we need ur help

sure can..y not..

@guys
here http://www.overclockers.com/amd-phenom-ii-x6-1075t-review/ said there will be BE and NON-BE 1075t.. but they claim that they received the tray proc which is non BE
and any other review sites i browsed OC with multi capped at 15x.. and some dont even mention about BE..anyone pls clarify? seems like unker ah khoo said

This post has been edited by kuntawakaw: Sep 24 2010, 03:12 AM

So, wat ram is suitable for oc at amd?kingston tall hs?

not really sir, usually slightly higher, say 0.05~0.10v higher mebe?

cut yaself some slack sir, u just had d gt like around 48 hours only... give yaself sometime & i'm sure u can come out w/ better results.

why not if u have a thuban & a decent 8xx board?

for d moment there's no 1075t BE, u can check in AMD compare. locked 1075t are supposed to run @ 3.0GHz, some how in Czech & Singapore (there could be more countries), d box is labelled as 2.8GHz only. so far non posted in XS/VRZ to verify those chip are of 3.0GHz as claimed.

check ya wallet & check i4memory forum, there's a thread (posted by kunta b4) statin what model usin what chipppies... a very informative thread. give d budget then d suggestions will come. if $$$ not a problem, by all means go for hyper sticks. either u offer high price locally or u direct order from d states.


btw guys, i'm sellin off d 4.1GHz capable chip, do have a peep in Garage Sales.

This post has been edited by ah_khoo: Sep 24 2010, 11:22 AM

if my budget arn below 600???

not so sure bout d price in lyn, if u want 2k @ 7-9-7, u must settle w/ psc sticks imo. i just tried team xtreem lv (bbse), 2k is doable @ 8-9-8 (almost get it prime stable 1 hour last nite but restarted this morning & i didn't take ss b4 i went to bed ). i think gksill pi 1600 6-8-6 should be runnin on psc. price wise u gotta check in bulk order i think. alternatively u can try adata 1866, they are of d great hyper chippies accordin to otai here.

This post has been edited by ah_khoo: Sep 24 2010, 11:08 AM

Dun have high hope for AMD..

1.65V failed memtest86, 1.675V work fine..

Not much choice, you can consider this flare PC314400
http://www.newegg.com/Product/ProductList....8PC3%2014400%29

no that doesnt make sense on the ram voltage rating u mentioned amd vs p55

do u know how they test ram stick voltage

it aint on a mobo. its on a ram tester card.

Can you pls re-phase this sentense? Puzzle.

This post has been edited by louislkw: Sep 24 2010, 11:39 AM

alaa... just a notch up only sir, take it as mobo undervolt lah...

hmmm... something new to me, but boards & imc behave differently, some more take undervolt/overvolt factor into consideration i think it's acceptable to me. from ya experience, does ram binnin effect vdimm as well sir?

binning is just to classify prodcut range

thats all.

imc etc doesnt play as a factor

but again i have no experience on amd for a very long time.

just shopping around now for one rig.
planning to get a 1095+Crosshair extreme
rams i have plenty

and need a mobo block and cpu block.
mobo block to make sure flux on ioh/ich etc and regulators on it doesnt impede any ram clocking..

Wow...cant wait to see your result on AMD sir...

This post has been edited by verdict: Sep 24 2010, 12:24 PM

woot... interesting facts... it's great to have u n board sir, this thread is missin someone like u to nourish average users like me.

1095 + CHIV Extreme?!!! speehless i am...

enjoy d shoppin spree & keep us posted...

is it gskill pi in malaysia jus hav 1600 mhz??this ram looks like so good..hehe..

1090T ya.. 1095 is bug in CPU-Z

Second of that...

This post has been edited by louislkw: Sep 24 2010, 12:09 PM

Third that!!

hmm before i press report
ure sig is one line above 15.

reading the manual on crosshair extreme..
from the bios pic .. its a digital pwm like rampage iii extreme and has extreme ov option so u can change the pwm speeds and disable any ocp's on dram etc.

again. hope to get this up and running after seeing a few ppl doing 2100-2200 already on this board.

---

Added on September 24, 2010, 12:27 pmppl if ure serious about getting good bin PSC's at cheapo price

Mach Extreme lol 2300 CL8-11-8-28.. its around rm 6xx.. or gskill Pi's area also a safe bet but problem is

PSC range on gskill is kindda big
with 1600- to 2000's and then with flare

so when they do binning they will do a lot of selection binning etc. so tough luck to be lucky.

thats why the dom gt 2k c8 CMT rev 7.1A sticks some get lucky.. but then again for the price u pay..eh is it really luck

This post has been edited by cstkl1: Sep 24 2010, 12:28 PM

Go go go..

Agreed on the price that was paid for this.