Powered by,
User List
Deneb and Newer Architechture
» Click to show Spoiler - click again to hide... «
This post has been edited by Lacus: Jul 7 2011, 11:55 AM
AMD® Socket AM2&AM3 Overclocking V25, 990FX, Bulldozer!
|
|
  Jul 7 2011, 11:46 AM, updated 15y ago
Show posts by this member only | Post
#1
|
 
Staff
5,250 posts Joined: Nov 2004 
|
Powered by, User List Deneb and Newer Architechture This post has been edited by Lacus: Jul 7 2011, 11:55 AM |
Quote|
|
|
|
|
Jul 7 2011, 11:47 AM
Show posts by this member only | Post
#2
|
|
Staff
5,250 posts Joined: Nov 2004
|
Agena,Windsor and Older Architechture » Click to show Spoiler - click again to hide... « Rules: Show your SuperPi/HyperPi 32M, Prime95(Blend) [>1 hour] or OCCT with CPU-Z[CPU and Memory Tab]   Please provide your hardware detail using the code below : CODE Processor Model | Overclocked Speed | LYN Nick | Mobo Model | Ram Type | Ram Speed | Ram Timing | Cooler Model Example : CODE AMD Athlon 4600+F3 Windsor | 3450Mhz | AMDAthlon |Abit AX78 | OCZ DDR2 6400 | 850Mhz | 4-4-4-12-16 | AMD Stock Cooler * For Unlocked Processor,please tell your Original Processor Model. |
|
|
Jul 7 2011, 11:47 AM
Show posts by this member only | Post
#3
|
|
Staff
5,250 posts Joined: Nov 2004
|
AM2 CPU/DDR2 Divider Table » Click to show Spoiler - click again to hide... « AM3 CPU/NB Frequency/DDR3 Divider Table » Click to show Spoiler - click again to hide... « Flashing in DOS environment HP USB Disk Storage Format Tool: http://bootdisk.com/plan40/hpflash1.zip Boot disk for Dos system: http://bootdisk.com/bootdisk.htm » Click to show Spoiler - click again to hide... « Guides DDR2 RAM overclocking - the confusion, Tighter timings or higher frequency : https://forum.lowyat.net/topic/627600 Basic guide - DDR2 ram overclocking : https://forum.lowyat.net/topic/626450 Basic guide - Overclocking a 939/AM2 : https://forum.lowyat.net/topic/625156 Phenom Overclocking Tips : http://www.thetechrepository.com/showthread.php?t=258 Phenom II AM3 Overclocking : http://www.techreaction.net/2009/05/28/phe...ing-essentials/ Phenom II Overclocking Guide : http://www.techreaction.net/forums/showthread.php?t=367 AMD Phenom II Core Unlocking Guide : http://www.overclock.net/amd-cpus/535501-a...king-guide.html PhenomMsrTweaker Guide: Custom Cool 'N Quiet for Overclocks : http://www.overclock.net/amd-cpus/551259-p...ol-n-quiet.html Phenom II IMC & Ram Overclocking Guide : http://slappablog.wordpress.com/2010/10/14...clocking-guide/ Modded BIOS Bios and discussing forum [Modded] : http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi Flash at your own risks.   Useful Threads LYN DDR2 discussions : https://forum.lowyat.net/topic/298646 LYN Super PI 1M Top 10 (DDR2) : https://forum.lowyat.net/topic/321443 Advanced AM2+ AMD Chipset Configuration Options and What They Mean :http://www.xtremesystems.org/forums/showthread.php?t=216840 1T vs 2T Command Rate - Is there a Real Performance Difference? : http://www.overclock.net/amd-memory/32605-...rate-there.html List of DDR3/DDR2/DDR IC Chips on various RAM brand Modules : http://www.overclock.net/amd-memory/286688...r-ic-chips.html AM3 CPU's Which Ram Speed is Faster and Which CPU-NB Clock is Best :http://www.overclock.net/amd-memory/555061...eed-faster.html Useful Softwares AMD Overdrive : http://game.amd.com/us-en/drivers_overdrive.aspx?p=1 Coretemp : http://www.alcpu.com/CoreTemp/ HW Monitor : http://www.cpuid.com/hwmonitor.php CPU-z : http://www.cpuid.com/cpuz.php MemSet : http://www.tweakers.fr/memset.html Prime95 : http://www.mersenneforum.org/showthread.php?t=8981 SuperPI Mod 1.5 : http://dl.techpowerup.com/Benchmarking/super_pi_mod-1.5.zip BAR Edit 3.2 : http://www.tweakers.fr/baredit.html |
|
|
Jul 7 2011, 11:50 AM
Show posts by this member only | Post
#4
|
|
Staff
5,250 posts Joined: Nov 2004
|
Reserved!
Credit: Forumer AMD Athlon for being the TS for pass few version. ©2011 Advanced Micro Devices, Inc.  History: AMD® Socket AM2&AM3 Overclocking V24 AMD® Socket AM2&AM3 Overclocking V23 AMD® Socket AM2&AM3 Overclocking V22 AMD® Socket AM2&AM3 Overclocking V21 AMD® Socket AM2&AM3 Overclocking V20 AMD® Socket AM2&AM3 Overclocking V19 AMD® Socket AM2&AM3 Overclocking V18 AMD® Socket AM2&AM3 Overclocking V17 AMD® Socket AM2&AM2+ Overclocking V16 AMD® Socket AM2&AM2+ Overclocking V15 I've decided to remove Old SPI Records due to i find that it is quite outdated. However,i still accept new SPI Records. (temporary becoming the TS since no one wants to create a new thread for AMD  )This post has been edited by Lacus: Jul 7 2011, 11:50 AM |
|
|
Jul 7 2011, 11:51 AM
Show posts by this member only | Post
#5
|
|
Staff
5,250 posts Joined: Nov 2004
|
Reserved again just in case.
|
|
|
Jul 7 2011, 12:32 PM
Show posts by this member only | Post
#6
|
 
Senior Member
3,812 posts Joined: Dec 2008 From: Eden 
|
new thread!!!! we need some 990fx result here~
 |
|
|
|
|
|
Jul 7 2011, 03:46 PM
Show posts by this member only | Post
#7
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies.... 
|
QUOTE(uzer85 @ Jul 7 2011, 12:32 PM) new thread!!!! we need some 990fx result here~ here u go mind u..a fake result here |
|
|
Jul 7 2011, 06:49 PM
Show posts by this member only | Post
#8
|
Senior Member
6,009 posts Joined: Feb 2007 
|
Just bought m5a99x evo, and sh-t my 4 sticks of ECO isnt supported
 Currently running at 1232mhz, cant oc/tweak unless remove another 2 sticks  I miss my UD7 rock solid oc mobo.... |
|
|
Jul 7 2011, 08:17 PM
Show posts by this member only | Post
#9
|
|
Senior Member
3,812 posts Joined: Dec 2008 From: Eden
|
QUOTE(1024kbps @ Jul 7 2011, 06:49 PM) Just bought m5a99x evo, and sh-t my 4 sticks of ECO isnt supported yup. UD7 is powderful~ Currently running at 1232mhz, cant oc/tweak unless remove another 2 sticks I miss my UD7 rock solid oc mobo.... |
|
|
Jul 7 2011, 08:23 PM
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
im outdated siak! later will post my old result...
|
|
|
Jul 7 2011, 08:24 PM
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(1024kbps @ Jul 7 2011, 06:49 PM) Just bought m5a99x evo, and sh-t my 4 sticks of ECO isnt supported Eh? That is a 990X mobo eh? Where u buy it meh? I thought M'sia not coming in wif any 990X mobo liao? Currently running at 1232mhz, cant oc/tweak unless remove another 2 sticks I miss my UD7 rock solid oc mobo.... How much u bought it & where? |
|
|
Jul 7 2011, 10:19 PM
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 7 2011, 08:24 PM) Eh? That is a 990X mobo eh? Where u buy it meh? I thought M'sia not coming in wif any 990X mobo liao? He is stationed at sg bro, just like me. How much u bought it & where? Btw, if 8gb needed, why go for 4 dimm bro? It's nothing new that most if not all amd boards not doin gud in 4dimm oc.  I believe d board will fly with 2 dimm oc. My cheapo winova can do 2.1k, i expect more from eco which is at least a class higher.  This post has been edited by ah_khoo: Jul 8 2011, 09:21 AM |
|
|
Jul 7 2011, 10:41 PM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
QUOTE(ah_khoo @ Jul 7 2011, 10:19 PM) He is stationed at sg bro, just like me. yeah that 4 sticks RAM is the Major hindrance to oc... Btw, if 8gb needed, why go for 4 dimm bro? It's nothing new that most if not all amd boards not doin gud in 4dimm oc. I ibelieve d board will fly with 2 dimm oc. My cheapo winova can do 2.1k, i expect more from eco which is at least a class higher. i duno this 4 sticks can sell how much since im pretty much broken now <bought SSD and bluray burner already XD Im already used to 8GB ram, dun wanna see win7 keep nagging about ram not enough Need ram recommendation... i wonder if Gskill Ripjaw is good enough, and i think this is the only amd-compatible ram that can be bought directly from SLS /facepalm. OR just buy from this guy http://forums.vr-zone.com/motherboards-cpu...ed-30-06-a.html |
|
|
|
|
|
Jul 7 2011, 11:18 PM
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu 
|
QUOTE(cloudwan @ Jul 7 2011, 08:24 PM) Eh? That is a 990X mobo eh? Where u buy it meh? I thought M'sia not coming in wif any 990X mobo liao? O.o u mean that m'sia wont be selling any 990x mobo ody?? how come??How much u bought it & where? |
|
|
Jul 7 2011, 11:40 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(1024kbps @ Jul 7 2011, 10:41 PM) yeah that 4 sticks RAM is the Major hindrance to oc... asus play nice w/ winova 4gb, so i'd expect d same w/ 8gb. haven't tested ripjaws x on 9xx asus board, but 4gb kit was shiat on my 880evo. tough call, i think better wait or if ur close enuf w/ sir louis u can ask him to try for u on chv. i duno this 4 sticks can sell how much since im pretty much broken now <bought SSD and bluray burner already XD Im already used to 8GB ram, dun wanna see win7 keep nagging about ram not enough Need ram recommendation... i wonder if Gskill Ripjaw is good enough, and i think this is the only amd-compatible ram that can be bought directly from SLS /facepalm. OR just buy from this guy http://forums.vr-zone.com/motherboards-cpu...ed-30-06-a.html  QUOTE(jeff88rey @ Jul 7 2011, 11:18 PM) O.o u mean that m'sia wont be selling any 990x mobo ody?? how come?? coz asus my not bringin in d model... my 1100t which walled @ 2750MHz imc did a 3k on gd80... weeeee....  
|
|
|
Jul 8 2011, 12:05 AM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
QUOTE(ah_khoo @ Jul 7 2011, 11:40 PM) coz asus my not bringin in d model... oh man.. means forever no 990x board in m'sia??LOL wat a waste.. aiyo This post has been edited by jeff88rey: Jul 8 2011, 12:06 AM |
|
|
Jul 8 2011, 12:24 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(jeff88rey @ Jul 8 2011, 12:05 AM) oh man.. means forever no 990x board in m'sia??LOL competition is too tight in MY ledi. We can see giga & msi are quite aggressive in term of pricing, even asus 'emselves are putting affordable tag on their flagship boards in TUF & ROG. bring in too many model (at almost similar price range mite jeopardize d sales imo) wat a waste.. aiyo This post has been edited by ah_khoo: Jul 8 2011, 11:33 AM |
|
|
Jul 8 2011, 12:32 AM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
QUOTE(ah_khoo @ Jul 7 2011, 11:40 PM) asus play nice w/ winova 4gb, so i'd expect d same w/ 8gb. haven't tested ripjaws x on 9xx asus board, but 4gb kit was shiat on my 880evo. tough call, i think better wait or if ur close enuf w/ sir louis u can ask him to try for u on chv. SLS shop got sell winova? dont see any shop selling it coz asus my not bringin in d model... my 1100t which walled @ 2750MHz imc did a 3k on gd80... weeeee....
Dang i want GeiL ram too  sls got plenty of lousy ram i think.lol then i shall skip ripjaw x until someone tested it. btw what is the previous mobo? i was able to do 3K IMC with my ud7 when using Ripjaws 2000mhz. though i wasnt sure if it was stable or not Shall try it after pulled out another 2 stick of eco |
|
|
Jul 8 2011, 09:03 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(1024kbps @ Jul 8 2011, 12:32 AM) SLS shop got sell winova? dont see any shop selling it no, they are brought in by bro momokabuto in HWZ. Lifetime warranty @ $149 (8GB kit). Dang i want GeiL ram too sls got plenty of lousy ram i think.lol then i shall skip ripjaw x until someone tested it. btw what is the previous mobo? i was able to do 3K IMC with my ud7 when using Ripjaws 2000mhz. though i wasnt sure if it was stable or not Shall try it after pulled out another 2 stick of eco u can hardly find any 8gb kit can do 1600 @ 7-7-7 w/ 1.62v outta box which cost u less than $150...  tried that (IMC) on 880G EVO & 990X EVO, max bootable @ 2750MHz w/ below 1.35v, didn't bother to try higher volt as d chip is hot enuf liao. this 1100t chip isn't d best so dun compare with ya retail chip... This post has been edited by ah_khoo: Jul 8 2011, 09:32 AM |
|
|
Jul 9 2011, 10:49 PM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
QUOTE(ah_khoo @ Jul 8 2011, 09:03 AM) no, they are brought in by bro momokabuto in HWZ. Lifetime warranty @ $149 (8GB kit). Actually i want some OC-able ram, Your Team ram looks great u can hardly find any 8gb kit can do 1600 @ 7-7-7 w/ 1.62v outta box which cost u less than $150... tried that (IMC) on 880G EVO & 990X EVO, max bootable @ 2750MHz w/ below 1.35v, didn't bother to try higher volt as d chip is hot enuf liao. this 1100t chip isn't d best so dun compare with ya retail chip...  2Ghz i what i aim for, well i forgot AMD board got what kind of RAM divider already I need to clock my HTT to 300 so i can do 3Ghz IMC, 1.6GHz for ram, at least(if can do 2G then better lol), and 3.9GHz for my cpu. 8GB kit winova really looks great and cheap tooo... but that 4 sticks ECO cost me 320SGD... duno can sell how much now |
|
|
Jul 10 2011, 12:25 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(1024kbps @ Jul 9 2011, 10:49 PM) Actually i want some OC-able ram, Your Team ram looks great meh... there're alot ram can do 2k @ 7-9-7 even on 8xx series boards, so this isn't something spectacular considerin it is done on 990fx... 2Ghz i what i aim for, well i forgot AMD board got what kind of RAM divider already I need to clock my HTT to 300 so i can do 3Ghz IMC, 1.6GHz for ram, at least(if can do 2G then better lol), and 3.9GHz for my cpu. 8GB kit winova really looks great and cheap tooo... but that 4 sticks ECO cost me 320SGD... duno can sell how much now i hardly play w/ 8GB kits as winova 8GB is d only kit i've ever tested. highest if i'm not mistaken was 1800 @  it's chip dependent too bro, for thuban, deneb & below, highest divider we have is ddr 1600, which is equal to 4 x htt. for lowers we have ddr 1333, 1066 & 800.  sadly for ram @ 2k, u can only use 1600 divider, lower dividers don't work when ram freq reaches near 2k & above.  winova played well on asus boards, but sadly, same thing can't be said on MSI 990fx boards. eco got no value in vrz nowadays. few days back elpibe10 sold his around $60/70 per pair only. This post has been edited by ah_khoo: Jul 10 2011, 12:33 AM |
|
|
Jul 10 2011, 06:48 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(1024kbps @ Jul 9 2011, 10:49 PM) Actually i want some OC-able ram, Your Team ram looks great last time eco can get high price.. i sold mine at 3XX per kit and that was quite fast. some one even sell at 4XX 2Ghz i what i aim for, well i forgot AMD board got what kind of RAM divider already I need to clock my HTT to 300 so i can do 3Ghz IMC, 1.6GHz for ram, at least(if can do 2G then better lol), and 3.9GHz for my cpu. 8GB kit winova really looks great and cheap tooo... but that 4 sticks ECO cost me 320SGD... duno can sell how much now now at 270 for quite new ram no one even ask about that that is the prob for a non BE thuban.. 3ghz NB can be achieve easily but need quite high HTT.. if deneb, propus or regor, i dont care much cuz 3GHZ NB usually need high volt which not suitable for daily usage. |
|
|
Jul 11 2011, 10:49 AM
|
|
Staff
5,250 posts Joined: Nov 2004
|
Back from SG yesterday.. how come SLS only sells majority of Intel stuff? Damn hard to look for AMD stuffs though..
|
|
|
Jul 11 2011, 11:03 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(Lacus @ Jul 11 2011, 10:49 AM) Back from SG yesterday.. how come SLS only sells majority of Intel stuff? Damn hard to look for AMD stuffs though.. what kinda AMD stuff ur lookin for sir? big shops like Fuwell, Cybermind, Bell Systems, VideoPro & PCThemes do carry AMD chips & boards, but apparently Intel offers more choices. There are very few AMD users in VR-Zone & HWZ, so that's self explanatory. This post has been edited by ah_khoo: Jul 11 2011, 11:03 AM |
|
|
Jul 11 2011, 11:31 AM
|
|
Staff
5,250 posts Joined: Nov 2004
|
QUOTE(ah_khoo @ Jul 11 2011, 11:03 AM) what kinda AMD stuff ur lookin for sir? big shops like Fuwell, Cybermind, Bell Systems, VideoPro & PCThemes do carry AMD chips & boards, but apparently Intel offers more choices. There are very few AMD users in VR-Zone & HWZ, so that's self explanatory. mobos to be exact.. Saw sabertooth though and it's like.. iseeinteleverywhereinsimlimsquare. only the few shops u mention has them .. PC theme.. small but shitloads of stuff. Shop owner there are friendly too. |
|
|
Jul 11 2011, 11:46 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(Lacus @ Jul 11 2011, 11:31 AM) mobos to be exact.. Saw sabertooth though and it's like.. Omai lacus u were there to buy sabertooth? Naise iseeinteleverywhereinsimlimsquare. only the few shops u mention has them .. PC theme.. small but shitloads of stuff. Shop owner there are friendly too. |
|
|
Jul 11 2011, 11:53 AM
|
|
Staff
5,250 posts Joined: Nov 2004
|
err, lets just say maybe? but SG style is bundle with proc. must a well wait for BD
|
|
|
Jul 11 2011, 12:51 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(Lacus @ Jul 11 2011, 11:31 AM) mobos to be exact.. Saw sabertooth though and it's like.. d price of Sabertooth is too near to CHV, so if one plannin to go Sabertooth, mite as well get a CHV instead. Better PWM, nicer theme & more pcb layers (6vs 8). most importantly, d ROG series logo... iseeinteleverywhereinsimlimsquare. only the few shops u mention has them .. PC theme.. small but shitloads of stuff. Shop owner there are friendly too. yup, PCT is one of d nicest shop in SLS, decent price, buck loads of goodies & friendly staffs... QUOTE(Lacus @ Jul 11 2011, 11:53 AM) err, lets just say maybe? but SG style is bundle with proc. must a well wait for BD u can buy chip/board separately sir, but bundle price ofkos cheaper. |
|
|
Jul 12 2011, 10:32 PM
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
wah new thread already...hohoho
 congratz |
|
|
Jul 13 2011, 11:30 PM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
im juz wondering if C5F support quad sli/xfire??
in the website, i saw sabertooth support quad but how come a ROG board ony triple  but i know it wont fit 4 GPUs thre.. very weird of its marketing This post has been edited by jeff88rey: Jul 13 2011, 11:34 PM |
|
|
Jul 14 2011, 03:45 AM
|
Senior Member
8,686 posts Joined: Mar 2009
|
oh, missing for few days, v25 already.
haha, new thread, welcoming for zambesi. Benchmark Results of AMD FX "Zambezi" 8130P Chips Emerge on the Internet |
|
|
Jul 14 2011, 10:38 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(jeff88rey @ Jul 13 2011, 11:30 PM) im juz wondering if C5F support quad sli/xfire?? i think quad as in max 4 gpu, either 2 cards w/ dual gpu or 4 cards w/ single gpu where else chv is tri way sli/x-fire, it can be either 3 cards with single or dual gpu??? perhaps some sifu can enlighten us on this. but logically speaking there's no way a sabertooth can be better than chv (on paper at least), unless warranty wise. in the website, i saw sabertooth support quad but how come a ROG board ony triple but i know it wont fit 4 GPUs thre.. very weird of its marketing This post has been edited by ah_khoo: Jul 14 2011, 10:40 AM |
|
|
Jul 14 2011, 12:05 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 14 2011, 10:38 AM) i think quad as in max 4 gpu, either 2 cards w/ dual gpu or 4 cards w/ single gpu where else chv is tri way sli/x-fire, it can be either 3 cards with single or dual gpu??? perhaps some sifu can enlighten us on this. but logically speaking there's no way a sabertooth can be better than chv (on paper at least), unless warranty wise. i think sabertooth only best on dual gpu card that on sli/cfx more then that maybe not perform at the fullest since only got 2 pcie lane that run x16... |
|
|
Jul 14 2011, 12:29 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 14 2011, 12:05 PM) i think sabertooth only best on dual gpu card that on sli/cfx more then that maybe not perform at the fullest since only got 2 pcie lane that run x16... it's d same w/ chv too bro, as of now, no board can offer tri cfx @ 16x each... |
|
|
Jul 14 2011, 12:42 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 14 2011, 12:29 PM) it's d same w/ chv too bro, as of now, no board can offer tri cfx @ 16x each... yup bro saber n chv are almost identical.. for me not rich ppl dont mind about quad cfx/sli lalalala.... |
|
|
Jul 14 2011, 01:49 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(fatalynx05 @ Jul 14 2011, 12:42 PM) yup bro saber n chv are almost identical.. for me not rich ppl dont mind about quad cfx/sli lalalala.... Not rich but can buy CHV 990FX? Bwahahahaha.. |
|
|
Jul 14 2011, 02:08 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 14 2011, 01:49 PM) Not rich but can buy CHV 990FX? Bwahahahaha.. agreed bro... some more, moolah spent on 6950 can buy 5750 for tri/quad fire... |
|
|
Jul 14 2011, 02:49 PM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
LOL.. saber n C5F reli almost the same.. nid some more info on their difference
This post has been edited by jeff88rey: Jul 14 2011, 02:50 PM |
|
|
Jul 14 2011, 03:33 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(jeff88rey @ Jul 14 2011, 02:49 PM) LOL.. saber n C5F reli almost the same.. nid some more info on their difference lemme share with u those that i know:1. 6 layers pcb vs 8 layers pcb 2. 5 years warranty vs 3 years warranty 3. better pwm (compared to evo series) vs better pwm than saber 4. that hard to match color theme vs fiery red color theme |
|
|
Jul 17 2011, 11:40 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 14 2011, 03:33 PM) lemme share with u those that i know: yah coz it too good i rma it 2x same day -.- hahahahha 1. 6 layers pcb vs 8 layers pcb 2. 5 years warranty vs 3 years warranty 3. better pwm (compared to evo series) vs better pwm than saber 4. that hard to match color theme vs fiery red color theme Added on July 17, 2011, 12:01 pm QUOTE(cloudwan @ Jul 14 2011, 01:49 PM) Not rich but can buy CHV 990FX? Bwahahahaha.. ppl gave me for free lah... This post has been edited by fatalynx05: Jul 17 2011, 12:01 PM |
|
|
Jul 17 2011, 01:50 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 17 2011, 11:40 AM) yah coz it too good i rma it 2x same day -.- hahahahha i supposed it's either bad qc or ur simple outta luck bro... now i'm even more determined to test d chv... wait for me yer... i'll go usha2 someone... |
|
|
Jul 17 2011, 02:12 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 17 2011, 01:50 PM) i supposed it's either bad qc or ur simple outta luck bro... now i'm even more determined to test d chv... wait for me yer... i'll go usha2 someone... huhu... wanna sell msi ah? or u got demo mobo too play with?  |
|
|
Jul 17 2011, 02:16 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 17 2011, 02:12 PM) huhu... wanna sell msi ah? or u got demo mobo too play with? will just loan bro, but nothing firmed yet. GD80 is a keeper so not gonna sell until next socket... |
|
|
Jul 17 2011, 02:23 PM
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ah_khoo @ Jul 17 2011, 02:16 PM) will just loan bro, but nothing firmed yet. GD80 is a keeper so not gonna sell until next socket... i ish no belip wat u say~ BD delayed sumore...so... |
|
|
Jul 17 2011, 04:01 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I pulak will debut my 2 generations ago mobo, 790FX-GD70 soon
Finally will be starting it after a long time |
|
|
Jul 17 2011, 04:54 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 17 2011, 02:16 PM) will just loan bro, but nothing firmed yet. GD80 is a keeper so not gonna sell until next socket... yah me also dun belip u... i dun want make any statement for upcoming upgrade... |
|
|
Jul 17 2011, 04:59 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 17 2011, 04:01 PM) I pulak will debut my 2 generations ago mobo, 790FX-GD70 soon thubsn is in d house ledi bro? can't wait for great results comin our ways... Finally will be starting it after a long time QUOTE(fatalynx05 @ Jul 17 2011, 04:54 PM) yah me also dun belip u... i dun want make any statement for upcoming upgrade... y u no belip me bro? |
|
|
Jul 17 2011, 05:14 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 17 2011, 04:59 PM) thubsn is in d house ledi bro? can't wait for great results comin our ways... coz ur flow aren't predictable... hahahah y u no belip me bro? Added on July 17, 2011, 7:20 pmphewww....after godeh2 this saber.. finally got stable result... not familiar with the digi vrm thingy   This post has been edited by fatalynx05: Jul 17 2011, 07:20 PM |
|
|
Jul 17 2011, 07:39 PM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
wah.. cant wait to try it ody.. nid wait till next month then gt the fund
|
|
|
Jul 17 2011, 07:46 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
fatalynx failed with CnQ turn on
i want say "nice clock there" "awesome run u did there" also kenot..kekeke btw, i dont think LinX is the best stressing tool for AMD.. |
|
|
Jul 17 2011, 08:01 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(kuntawakaw @ Jul 17 2011, 07:46 PM) fatalynx failed with CnQ turn on aiyoo i memang on CnQ lah jimat karen ngaaa i want say "nice clock there" "awesome run u did there" also kenot..kekeke btw, i dont think LinX is the best stressing tool for AMD.. ...but its seem not like other mobo i use... the volt not decrease like the freq when in idle later i do oldies ways lah bro... prime  |
|
|
Jul 17 2011, 09:44 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
QUOTE(ah_khoo @ Jul 17 2011, 04:59 PM) thubsn is in d house ledi bro? can't wait for great results comin our ways... Bro, Thuban not in yet, anytime soon 1090T or the 1100T? Price difference is about RM50 My GTX570 will be coming tomorrow |
|
|
Jul 17 2011, 09:51 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(fatalynx05 @ Jul 17 2011, 08:01 PM) aiyoo i memang on CnQ lah jimat karen ngaaa its ok to turn on the CnQ but my prev post was to tell u to snap the actual speed..so that i can be impressed or what..kekekek ...but its seem not like other mobo i use... the volt not decrease like the freq when in idle later i do oldies ways lah bro... prime QUOTE(shinjite @ Jul 17 2011, 09:44 PM) Bro, Thuban not in yet, anytime soon over my personal opinion, get a 1090T.1090T or the 1100T? Price difference is about RM50 My GTX570 will be coming tomorrow reason is invalid.. so i wont post here..kekeke |
|
|
Jul 17 2011, 09:54 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Bro kuntawakaw, yeah basically I will be going for the 1090T as well
With the price right now, feel like it is a no brainer to pay RM50++ just for an extra 200Mhz Target is just 4-4.2Ghz if its achievable ^^ |
|
|
Jul 17 2011, 10:09 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
bro, by all mean follow dato k's advise, generally 1090t is cooler & more clockable then some 1100t. just need to get d right batch then u'll see d chip flies...
|
|
|
Jul 17 2011, 11:12 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
How do I see which batch is good?
Planning to just get a retail 1 and go for it |
|
|
Jul 17 2011, 11:20 PM
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(shinjite @ Jul 17 2011, 11:12 PM) How do I see which batch is good? same herePlanning to just get a retail 1 and go for it wanna know is that early batch can manage OC heavier than latest batch? |
|
|
Jul 17 2011, 11:38 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 17 2011, 10:09 PM) bro, by all mean follow dato k's advise, generally 1090t is cooler & more clockable then some 1100t. just need to get d right batch then u'll see d chip flies... yahhhh 1090T oc well then 1100T.... so far mine can do any reasonable speed as long u can tame heat n volt Added on July 17, 2011, 11:40 pm QUOTE(shinjite @ Jul 17 2011, 11:12 PM) How do I see which batch is good? http://www.xtremesystems.org/forums/showth...clocking-Charts Planning to just get a retail 1 and go for it This post has been edited by fatalynx05: Jul 17 2011, 11:40 PM |
|
|
Jul 18 2011, 12:51 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
1018 & 1021 are d batches which impressed me d most. My ex 1055 (batch 1018) did 3.9ghz w 1.33v while d 1090 (batch 1021) did 4ghz w 1.38v iirc. Both chip can do 3k nb w less than 1.3v too..
This post has been edited by ah_khoo: Jul 18 2011, 10:22 AM |
|
|
Jul 18 2011, 12:53 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Like that I try my luck and see haha
My watercooling kit will definitely help in terms of temps on load ^^ |
|
|
Jul 18 2011, 08:31 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
i also my batch lol....khoo ah any ram tweak update for ur gd80?
|
|
|
Jul 18 2011, 10:57 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 18 2011, 08:31 AM) i also my batch lol....khoo ah any ram tweak update for ur gd80? i has a sad, it seemed i'm too knob to run high freq on this board. < 2k @ decent timing is all i can do...  |
|
|
Jul 18 2011, 11:38 PM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
Btw ah_khoo, mind to give the link to the thread where is guy is selling the Winova ram?
Or any ram do you recommend? As long as im with this 8gig of Eco ram i wont be able to oc Dunno can sell it at decent price or not And sorry lately unable to play much with my pc so i turned my machine into protein folding simulator |
|
|
Jul 19 2011, 03:16 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 18 2011, 10:57 PM) i has a sad, it seemed i'm too knob to run high freq on this board. < 2k @ decent timing is all i can do... wah i tot only me cant squeeze on da 990 chip  maybe got other tricks for this chip Added on July 19, 2011, 3:17 am QUOTE(1024kbps @ Jul 18 2011, 11:38 PM) Btw ah_khoo, mind to give the link to the thread where is guy is selling the Winova ram? here u go...Or any ram do you recommend? As long as im with this 8gig of Eco ram i wont be able to oc Dunno can sell it at decent price or not And sorry lately unable to play much with my pc so i turned my machine into protein folding simulator http://forum.lowyat.net/index.php?showtopic=613391&hl (ah-khoo source)This post has been edited by fatalynx05: Jul 19 2011, 03:19 AM |
|
|
Jul 19 2011, 07:39 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(1024kbps @ Jul 18 2011, 11:38 PM) Btw ah_khoo, mind to give the link to the thread where is guy is selling the Winova ram? 8gb 2x4gb or 4x2gb bro? if 2x4gb higher chance to get it sold. now ram is dirt cheap and also ppl looking for value ram only now. my rams i donno for how many months in garage sale but no one bother to ask.. Or any ram do you recommend? As long as im with this 8gig of Eco ram i wont be able to oc Dunno can sell it at decent price or not And sorry lately unable to play much with my pc so i turned my machine into protein folding simulator QUOTE(fatalynx05 @ Jul 19 2011, 03:16 AM) wah i tot only me cant squeeze on da 990 chip it was his 1100T chip.. not the mobo chip maybe got other tricks for this chip that processor is not that good.. |
|
|
Jul 19 2011, 08:29 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Finally got my GTX570
Now left RAMs and 1090T to go and my 790FX board can finally debut XD |
|
|
Jul 19 2011, 09:38 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
Need advice and opinion
have a very2 tight budget and planning wanna pair 1090T with M4A78 Plus so i wanna know is that AM2+ mobo will drop my future 1090T cpu performance? This post has been edited by lat_lonelyboyz: Jul 19 2011, 09:39 AM |
|
|
Jul 19 2011, 10:10 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(1024kbps @ Jul 18 2011, 11:38 PM) Btw ah_khoo, mind to give the link to the thread where is guy is selling the Winova ram? bro, here is d link in HWZOr any ram do you recommend? As long as im with this 8gig of Eco ram i wont be able to oc Dunno can sell it at decent price or not And sorry lately unable to play much with my pc so i turned my machine into protein folding simulator i dunno bout 8gb kit coz winova is d only pair i've ever tested. but for its price, i can say nothing beat it. what u'll lose is a bit of aesthetics look + no kick ass name. thumbs up for foldin, keep up d good works bro... QUOTE(fatalynx05 @ Jul 19 2011, 03:16 AM) wah i tot only me cant squeeze on da 990 chip. maybe got other tricks for this chip 2.1k (super lax timing like 9-10-9) was a breeze on asus board provided ur on 9xx + thuban + winova 4GB kit. what ram ur usin bro? QUOTE(kuntawakaw @ Jul 19 2011, 07:39 AM) it was his 1100T chip.. not the mobo chip it's user problem bro... bro clon22 hit 2.2k @ 7-10-7 w/o sweat, but noob like me kenot... that processor is not that good.. QUOTE(shinjite @ Jul 19 2011, 08:29 AM) Finally got my GTX570 can't wait... Now left RAMs and 1090T to go and my 790FX board can finally debut XD  QUOTE(lat_lonelyboyz @ Jul 19 2011, 09:38 AM) Need advice and opinion never try x6 on that board so i can't really comment. but in general, 9xx > 8xx > 7xx, this applies at least on ram oc. ofcoz, i'm talkin bout decent board, not someone's ordinary alibaba boards. have a very2 tight budget and planning wanna pair 1090T with M4A78 Plus so i wanna know is that AM2+ mobo will drop my future 1090T cpu performance? edited: there're few exceptions thou... see bro verdict usin 790fx-gd70 oc like charm i'm like eatin my own words...  This post has been edited by ah_khoo: Jul 19 2011, 10:16 AM |
|
|
Jul 19 2011, 10:51 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I hope my 790FX GD70 OCs well too ^^
|
|
|
Jul 19 2011, 10:55 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 19 2011, 10:51 AM) I hope my 790FX GD70 OCs well too ^^ w/ ya past records, i'm sure it will bro... |
|
|
Jul 19 2011, 10:59 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(shinjite @ Jul 19 2011, 10:51 AM) I hope my 790FX GD70 OCs well too ^^ my ex favorite mobo seems like this mobo's price drop to much when 990FX launched time to upgrade *anyway how much pwm on this mobo? is that 8+2? |
|
|
Jul 19 2011, 11:03 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 10:59 AM) my ex favorite mobo gd70 @ 4+1, need to take extra precautions when u prime it usin high volts. actively cool d pwm can prevent shits happen. seems like this mobo's price drop to much when 990FX launched time to upgrade *anyway how much pwm on this mobo? is that 8+2? |
|
|
Jul 19 2011, 11:21 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(ah_khoo @ Jul 19 2011, 11:03 AM) gd70 @ 4+1, need to take extra precautions when u prime it usin high volts. actively cool d pwm can prevent shits happen. i tot its 8+2 phase because high end mobo from MSIwhat i know is, higher number of phase/pwm can make more durablity when OC |
|
|
Jul 19 2011, 11:25 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 11:21 AM) i tot its 8+2 phase nolah, it's 4+1, same with it's predecessor in 890fx. because high end mobo from MSIwhat i know is, higher number of phase/pwm can make more durablity when OC theoretically yes, but not necessarily. quality of components used does matter too. This post has been edited by ah_khoo: Jul 19 2011, 11:27 AM |
|
|
Jul 19 2011, 11:28 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Jul 19 2011, 11:25 AM) nolah, it's 4+1, same with it's predecessor in 890fx. What about the new 990FX-GD80 khoo? Still 4+1 or 8+2 already? theoretically yes, but not necessarily. quality of components used does matter too. |
|
|
Jul 19 2011, 11:30 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 19 2011, 11:28 AM) What about the new 990FX-GD80 khoo? Still 4+1 or 8+2 already? it's 8+2 bro...  |
|
|
Jul 19 2011, 11:39 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(ah_khoo @ Jul 19 2011, 11:30 AM) it's 8+2 bro... so hot » Click to show Spoiler - click again to hide... « estimate price for this baby how much ar? |
|
|
Jul 19 2011, 12:30 PM
|
Senior Member
998 posts Joined: May 2009 From: Bangi & Kuala Terengganu
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 12:39 PM) so hot RM 635 estimate price for this baby how much ar? http://forum.lowyat.net/topic/997446 |
|
|
Jul 19 2011, 12:56 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Well, I am just aiming for a 4-4.2Ghz 24/7 rig
4+1 shouldn't be a problem haha Not really into crazy time wasting OC for me already when my board debuts haha |
|
|
Jul 19 2011, 03:38 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(ah_khoo @ Jul 19 2011, 11:30 AM) it's 8+2 bro... wow, dream board. |
|
|
Jul 19 2011, 04:26 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 19 2011, 11:03 AM) gd70 @ 4+1, need to take extra precautions when u prime it usin high volts. actively cool d pwm can prevent shits happen. never ever go for gd70  hahahaha...i got bad experience with it trust me Added on July 19, 2011, 4:29 pm QUOTE(ah_khoo @ Jul 19 2011, 11:30 AM) it's 8+2 bro... wah duta msi promote leh... any new bios features compare to gd70 bro? This post has been edited by fatalynx05: Jul 19 2011, 04:29 PM |
|
|
Jul 19 2011, 04:50 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 19 2011, 04:26 PM) never ever go for gd70 what duta2 bro... me volunteer one okie... hahahaha...i got bad experience with it trust me Added on July 19, 2011, 4:29 pm wah duta msi promote leh... any new bios features compare to gd70 bro? i had very short spell w/ gd70 b4 so i can't really compare, but ram wise gd70 is richer coz no drive strength options in gd80... but, gd80 still decent enuf for mild clocker like me. This post has been edited by ah_khoo: Jul 19 2011, 04:53 PM |
|
|
Jul 19 2011, 05:46 PM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(fatalynx05 @ Jul 19 2011, 04:26 PM) never ever go for gd70 hahahaha...i got bad experience with it trust me pheww...almost go for it last month but suddently must use my fund for medical fee can define what bad it is bro fatal? This post has been edited by lat_lonelyboyz: Jul 19 2011, 05:47 PM |
|
|
Jul 19 2011, 06:02 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 05:46 PM) pheww...almost go for it last month but suddently must use my fund for medical fee it was a very good board back in its era.. 700series.can define what bad it is bro fatal? that time no thuban yet.. now, some ppl get problem with the board after insert thuban in.. plus this board is outdated.. if compare with 7series, mem clocking indeed great..but now with 900series, 790fx gd70 is nothing... |
|
|
Jul 19 2011, 06:30 PM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(kuntawakaw @ Jul 19 2011, 06:02 PM) it was a very good board back in its era.. 700series. even 970 chipset would be better than 790FX chipset?that time no thuban yet.. now, some ppl get problem with the board after insert thuban in.. plus this board is outdated.. if compare with 7series, mem clocking indeed great..but now with 900series, 790fx gd70 is nothing... last time got fren told me that 870 is better than 790GX chipset |
|
|
Jul 19 2011, 11:09 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 06:30 PM) even 970 chipset would be better than 790FX chipset? well.. depends on motherboard..and what is the thing that u are comparinglast time got fren told me that 870 is better than 790GX chipset let say. if Ram oc, i can say the yes. 870 better then 790fx. but stil not all 870 mobo better than all 790fx mobo generally is yes. if u talking about how durable 1 board is, then it depends on the component and quality build.chipset has nothing to do with this. if u plan to OC ur processor speed, just get a good cheap mobo with 8+2 ok already.. here in OCU always recommend 8+2..kekeke we like big pwm count..kekeke |
|
|
Jul 19 2011, 11:23 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Well, kinda waste if I sell my 790FX GD70 mobo, it looks damn nice with its bling bling back in its era
Note: Weird, I dunno why my GTX570 as stock clocks can score higher in 3DMark compared to it being overclocked >_>" |
|
|
Jul 20 2011, 12:07 AM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
QUOTE(kuntawakaw @ Jul 19 2011, 07:39 AM) 8gb 2x4gb or 4x2gb bro? if 2x4gb higher chance to get it sold. now ram is dirt cheap and also ppl looking for value ram only now. my rams i donno for how many months in garage sale but no one bother to ask.. 4x2GB it was his 1100T chip.. not the mobo chip that processor is not that good.. the time i buy the ECO iirc there was no 2X4GB kit, its very rare/non-exist on singapore, unless buy from oversea. Yeah now 8GB ram price dropped alot... luckily BD launch date got delayed, else it will took me very long time to buy new 8GB kit. Added on July 20, 2011, 12:25 am QUOTE(ah_khoo @ Jul 19 2011, 10:10 AM) bro, here is d link in HWZ Thanks for the link!i dunno bout 8gb kit coz winova is d only pair i've ever tested. but for its price, i can say nothing beat it. what u'll lose is a bit of aesthetics look + no kick ass name. thumbs up for foldin, keep up d good works bro... Look and name doesnt matter to me, i want clockable ram only! This post has been edited by 1024kbps: Jul 20 2011, 12:25 AM |
|
|
Jul 20 2011, 01:38 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 05:46 PM) pheww...almost go for it last month but suddently must use my fund for medical fee for me in 890 era cip even gigabyte 890gpa served me well compare to gd70 in term of proc overclocking... maybe my bad luck or else..can define what bad it is bro fatal? but i tell u my experience... the mosfet are unable to handle thuban 140w and often shutdown when in high load n stress, i also make loud hissing sound before it shut down only 3.8ghz r safe for it compare gigabyte 4.1ghz stable since i use lousy ram not much comment for da ram... better refer otai ah khoo for tweaking ram Added on July 20, 2011, 1:43 am QUOTE(ah_khoo @ Jul 19 2011, 04:50 PM) what duta2 bro... me volunteer one okie... wah bro gd80 dun have that features aye? kinda weird??? i had very short spell w/ gd70 b4 so i can't really compare, but ram wise gd70 is richer coz no drive strength options in gd80... but, gd80 still decent enuf for mild clocker like me. is it still have dr mos monitoring function?This post has been edited by fatalynx05: Jul 20 2011, 01:43 AM |
|
|
Jul 20 2011, 08:49 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(fatalynx05 @ Jul 20 2011, 01:38 AM) for me in 890 era cip even gigabyte 890gpa served me well compare to gd70 in term of proc overclocking... maybe my bad luck or else.. By using multiplier base cpu core, i tot didnt kacau ram it is? unless u bump its system bus will bump ram as well.but i tell u my experience... the mosfet are unable to handle thuban 140w and often shutdown when in high load n stress, i also make loud hissing sound before it shut down only 3.8ghz r safe for it compare gigabyte 4.1ghz stable since i use lousy ram not much comment for da ram... better refer otai ah khoo for tweaking ram so using multiplier to OC, even value ram can handle it? |
|
|
Jul 20 2011, 09:30 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lat_lonelyboyz @ Jul 19 2011, 06:30 PM) even 970 chipset would be better than 790FX chipset? it depends on how well is d build quality & bios implementation. yes, chipset does play an important role, but if u compare an oem 970 board to msi/asus/gigabyte 790fx, which one will be better. obviously d answer is clear, isn't it? last time got fren told me that 870 is better than 790GX chipset :/D QUOTE(1024kbps @ Jul 20 2011, 12:07 AM) Thanks for the link! no problem bro, have fun with d ram (& loan me if ur bored with it Look and name doesnt matter to me, i want clockable ram only! :/hehe: )... QUOTE(fatalynx05 @ Jul 20 2011, 01:38 AM) for me in 890 era cip even gigabyte 890gpa served me well compare to gd70 in term of proc overclocking... maybe my bad luck or else.. well, it's a fact that gd70 was a great board back then, apart from d weaker pwm. ppl burnt mosfet when primin & MSI was in hot water due to this issue. like i mentioned b4, if one were to put d board to test, some precaution steps must be taken. most important thing is to have d pwm cooled ACTIVELY. but i tell u my experience... the mosfet are unable to handle thuban 140w and often shutdown when in high load n stress, i also make loud hissing sound before it shut down only 3.8ghz r safe for it compare gigabyte 4.1ghz stable since i use lousy ram not much comment for da ram... better refer otai Added on July 20, 2011, 1:43 am wah bro gd80 dun have that features aye? kinda weird??? is it still have dr mos monitoring function? u mean temp monitorin for cpu pwm? if so i think hwinfo got a sensor showin d temp for pwm (i assume that coz d temp is almost as high as cpu temp). some sensors in hwmonitor not givin correct readin on gd80, hwinfo is a better tool. QUOTE(lat_lonelyboyz @ Jul 20 2011, 08:49 AM) By using multiplier base cpu core, i tot didnt kacau ram it is? unless u bump its system bus will bump ram as well. yup, but there's no ummphh if u just play with cpu oc while leave d ram @ stock. so using multiplier to OC, even value ram can handle it? This post has been edited by ah_khoo: Jul 20 2011, 09:31 AM |
|
|
Jul 20 2011, 09:35 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
ah khoo what is ur max temp for pwn in full load?
|
|
|
Jul 20 2011, 09:39 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
Started OC my cpu last night (boring what to do..hahahah)
OC my cpu till 3.8GHz@1.48v using multiplier only and i think performance didnt increase too much even below 10% (i just guess) *tested using Adobe CS5, roughly just faster about 3~8second only (i dont know how to check CPU performance. So i decided using my application to see by using my naked eye only ) |
|
|
Jul 20 2011, 09:39 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
pwn temps cant be measured unless you got a probe there...most mobos dont have temp readings for pwm
Added on July 20, 2011, 9:40 am QUOTE(lat_lonelyboyz @ Jul 20 2011, 09:39 AM) Started OC my cpu last night (boring what to do..hahahah) test CS5 loading or what? OC my cpu till 3.8GHz@1.48v using multiplier only and i think performance didnt increase too much even below 10% (i just guess) *tested using Adobe CS5, roughly just faster about 3~8second only (i dont know how to check CPU performance. So i decided using my application to see by using my naked eye only ) if loading then is HDD lo~This post has been edited by dafreak: Jul 20 2011, 09:40 AM |
|
|
Jul 20 2011, 09:41 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 20 2011, 09:35 AM) ah khoo what is ur max temp for pwn in full load? if hwinfo sensor is correct (from what i assume) it's 52'c @ load - 3.5GHz w/ 1.3xv. i have my pwm cooled actively like this: 
This post has been edited by ah_khoo: Jul 20 2011, 09:42 AM |
|
|
Jul 20 2011, 09:44 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 20 2011, 09:41 AM) if hwinfo sensor is correct (from what i assume) it's 52'c @ load - 3.5GHz w/ 1.3xv. is that custom bracket u using...kinda like a ram cooler... i have my pwm cooler actively like this:
mine only single fan... wanna go electronic shop looking for 3 more of those i felt like this mobo or 990 chip kinda bit hotter then before |
|
|
Jul 20 2011, 09:45 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ah_khoo @ Jul 20 2011, 09:41 AM) if hwinfo sensor is correct (from what i assume) it's 52'c @ load - 3.5GHz w/ 1.3xv. blow hot air from HS got use ka? i have my pwm cooled actively like this:
|
|
|
Jul 20 2011, 09:46 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(dafreak @ Jul 20 2011, 09:39 AM) pwn temps cant be measured unless you got a probe there...most mobos dont have temp readings for pwm Retouch something la bro Added on July 20, 2011, 9:40 am test CS5 loading or what? if loading then is HDD lo~ i dont know how to explain because im noob in CS5if loading issue, no need to say CS5 la. loading windows also can know |
|
|
Jul 20 2011, 09:47 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 20 2011, 09:44 AM) is that custom bracket u using...kinda like a ram cooler... that was a ocz xtc v2 ram cooler. one of d bling2 fan dead (becoz i cleaned it w/ w/ cutton mine only single fan... wanna go electronic shop looking for 3 more of those i felt like this mobo or 990 chip kinda bit hotter then before ) then i buy 2 x el-cheapo cm 6cm fan to mount on d bracket. x90FX is always hotter than xx0xX. QUOTE(dafreak @ Jul 20 2011, 09:45 AM) blow hot air from HS got use ka? ya tak ye jugak... but pullin is always weaker than pushin? lemme try when i have d time. thx for heads up dafreak gege... This post has been edited by ah_khoo: Jul 20 2011, 09:52 AM |
|
|
Jul 20 2011, 10:04 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
 mine only 1 fan huhuhu full load prime can reach 61c woooo if i set digi+vrm to extreme if manual switching maybe low This post has been edited by fatalynx05: Jul 20 2011, 10:11 AM |
|
|
Jul 20 2011, 10:24 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 20 2011, 10:04 AM) mine only 1 fan huhuhu full load prime can reach 61c woooo if i set digi+vrm to extreme if manual switching maybe low |
|
|
Jul 20 2011, 10:52 AM
|
|
Staff
5,250 posts Joined: Nov 2004
|
Really can't decide. The 990FX a bit too expensive for me while the Asrock 970Extreme 4 not available here.
|
|
|
Jul 20 2011, 12:15 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
QUOTE(Lacus @ Jul 20 2011, 10:52 AM) Really can't decide. The 990FX a bit too expensive for me while the Asrock 970Extreme 4 not available here. Bro Lacus, just waitNow is a bit too expensive because new product |
|
|
Jul 20 2011, 12:44 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 20 2011, 10:24 AM) cable tie another fan to d existin one bro... nice setup there btw... yaloh... later i wanna do bracket put dual fan nb fan also wanna put... sure buruk.. any idea bro?QUOTE(Lacus @ Jul 20 2011, 10:52 AM) Really can't decide. The 990FX a bit too expensive for me while the Asrock 970Extreme 4 not available here. get the asus 990 evo...sure cheaper the chv or saber... 6+2 phase and got digi+vrm |
|
|
Jul 20 2011, 01:12 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(fatalynx05 @ Jul 20 2011, 12:44 PM) yaloh... later i wanna do bracket put dual fan leave some gap between the vrm HS and the fan, ofcoz also make sure the hot air removed from d HS is exhausted away nb fan also wanna put... sure buruk.. any idea bro?get the asus 990 evo...sure cheaper the chv or saber... 6+2 phase and got digi+vrm if not the air recycle also no use lo |
|
|
Jul 20 2011, 01:19 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(fatalynx05 @ Jul 20 2011, 10:04 AM) mine only 1 fan huhuhu full load prime can reach 61c woooo if i set digi+vrm to extreme if manual switching maybe low Naise setup, how about a darker green WC coolant bro, that coolant look to light color to fit with the saber color theme |
|
|
Jul 20 2011, 01:45 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
durian colour coolant how to make yo~??
try grey colour coolant? never seen b4 though |
|
|
Jul 20 2011, 02:13 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(dafreak @ Jul 20 2011, 01:12 PM) leave some gap between the vrm HS and the fan, ofcoz also make sure the hot air removed from d HS is exhausted away sure haave gap...if not no flow of air to hs if not the air recycle also no use lo i got 80mm fan at da back suck hot air out QUOTE(cloudwan @ Jul 20 2011, 01:19 PM) Tudia gigi saber suda keluar, bwahahahaha how to make it darker? the dye that color lew Naise setup, how about a darker green WC coolant bro, that coolant look to light color to fit with the saber color theme or i put jambu batu+kiwi juicew lah |
|
|
Jul 20 2011, 02:29 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(fatalynx05 @ Jul 20 2011, 02:13 PM) sure haave gap...if not no flow of air to hs Naise idea lor, quick quick use that instead, must be powderful, bwahahahaha.. i got 80mm fan at da back suck hot air out how to make it darker? the dye that color lew or i put jambu batu+kiwi juicew lah |
|
|
Jul 20 2011, 02:31 PM
|
|
Senior Member
3,812 posts Joined: Dec 2008 From: Eden
|
QUOTE(Lacus @ Jul 20 2011, 10:52 AM) Really can't decide. The 990FX a bit too expensive for me while the Asrock 970Extreme 4 not available here. gd80 not that expensive yo~ |
|
|
Jul 20 2011, 03:09 PM
|
|
Staff
5,250 posts Joined: Nov 2004
|
QUOTE(uzer85 @ Jul 20 2011, 02:31 PM) gd80 not that expensive yo~ 6xx, why not sabertooth then? + layout not so nice compare to Asrock's 970 Extreme 4..Asus one on the other hand i dont see the pricing round. layout looks just ok.. of all still prefer Asrock's layout. |
|
|
Jul 20 2011, 04:13 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(dafreak @ Jul 20 2011, 09:45 AM) blow hot air from HS got use ka? its ok to blow the hot air..that air not that hot anyway.. just slightly warm.. it better then passive or pull..(at least for me) my hand told me so.. kekekek nah, my blink2 so far best way  |
|
|
Jul 20 2011, 04:20 PM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
How the new chip? impressive or not? please do share with us dato.
This post has been edited by verdict: Jul 20 2011, 04:20 PM |
|
|
Jul 20 2011, 04:57 PM
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang 
|
bro and sis sekalian,
running gskill model f3 12800cl8d-4gbtd..pushing it abit but the issue is ocing the ram pass 1700mhz from 1600mhz, anything pass this speed no post..not even V or any kind of adjustment help from 1333 its sweet..running 1446mhz 7-7-7 1.58V board issue(ahsus m4a78t-e)? or perhaps my noobie skill too poor |
|
|
Jul 20 2011, 05:03 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
@verdict
i can say the chip is better compared to my 1100t in term of imc the core speed havent test yet..need a better mobo only can test @powerslide its common for 7series mobo not to pass 1600mhz in ram oc. but not all cant. go get urself a C5F.kekeke and btw, no sis here.. kekekke This post has been edited by kuntawakaw: Jul 20 2011, 05:03 PM |
|
|
Jul 20 2011, 05:15 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
@kunta
it means amd, ahsus and you pijak me say im poor i cannot afford better chipset kekeke sad, but nvm tight timing and low V is what im going for now you not sis? i thought you are sis all this while asrock 970 extreme4 look like the mobo i want..cheap and reasonable  This post has been edited by PowerSlide: Jul 20 2011, 05:18 PM |
|
|
Jul 20 2011, 05:24 PM
|
|
Staff
5,250 posts Joined: Nov 2004
|
QUOTE(PowerSlide @ Jul 20 2011, 05:15 PM) @kunta Sadly i don't think it's available here it means amd, ahsus and you pijak me say im poor i cannot afford better chipset kekeke sad, but nvm tight timing and low V is what im going for now you not sis? i thought you are sis all this while asrock 970 extreme4 look like the mobo i want..cheap and reasonable .. layout nice... even has SLI support on it. downside of it is the Phase (4+1) |
|
|
Jul 20 2011, 06:25 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
wait for msi full 9xx series
|
|
|
Jul 20 2011, 06:29 PM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
AMD8xx series di anak tirikan
still suka dgn layout 870 Extreme3 dan 970 Extreme4 but like Lacus said, only have 4+1 phase |
|
|
Jul 21 2011, 09:54 AM
|
|
Staff
5,250 posts Joined: Nov 2004
|
QUOTE(lat_lonelyboyz @ Jul 20 2011, 06:29 PM) AMD8xx series di anak tirikan Someone here could get it for me but apparently it cost Rm4xx excluding postage... Warranty will be an issue only..still suka dgn layout 870 Extreme3 dan 970 Extreme4 but like Lacus said, only have 4+1 phase |
|
|
Jul 21 2011, 10:05 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(kuntawakaw @ Jul 20 2011, 05:03 PM) @verdict yo dato how ur proc working? the highest imc speed u can get how much aye? i can say the chip is better compared to my 1100t in term of imc the core speed havent test yet..need a better mobo only can test @powerslide its common for 7series mobo not to pass 1600mhz in ram oc. but not all cant. go get urself a C5F.kekeke and btw, no sis here.. kekekke its seem mine cannot go any above 2.7ghz if da ram speed ovah 16xxmhz here some mod been made  |
|
|
Jul 21 2011, 10:58 AM
|
|
Junior Member
231 posts Joined: May 2009
|
Guys, how did you all attach the fans over the vrm heatsink??
|
|
|
Jul 21 2011, 11:47 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(haziqk10 @ Jul 21 2011, 10:58 AM) Guys, how did you all attach the fans over the vrm heatsink?? diy bro...like bro ah khoo using ram cooler also can...like me.. screw into HS just make sure there's a gap between the fan and HS |
|
|
Jul 21 2011, 12:53 PM
|
|
Junior Member
14 posts Joined: Mar 2010
|
hi where to buy original AM3 HSF? & how much?
|
|
|
Jul 21 2011, 01:07 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(icygel @ Jul 21 2011, 12:53 PM) hi where to buy original AM3 HSF? & how much? the original came from amd i dun know got sell...but 3rd party low profile cooler same like stock HS got sell at local computer shop cost below rm50 |
|
|
Jul 21 2011, 03:27 PM
|
|
Junior Member
14 posts Joined: Mar 2010
|
QUOTE(fatalynx05 @ Jul 21 2011, 01:07 PM) the original came from amd i dun know got sell...but 3rd party low profile cooler same like stock HS got sell at local computer shop cost below rm50 thanks bro, actually my original HSF & box is missing & now thinking 1 day if wanna sell my processor must come with original HSF rite? or got ppl will buy the processor alone.. |
|
|
Jul 21 2011, 04:31 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(fatalynx05 @ Jul 21 2011, 10:05 AM) yo dato how ur proc working? the highest imc speed u can get how much aye? my board seems like has issue.. so cant really test.need to change to old board then only can its seem mine cannot go any above 2.7ghz if da ram speed ovah 16xxmhz here some mod been made wahh.. u no sayang ur heatsink ka screw like that. will scratch the heatsink kan? but good thing is 2 fans now QUOTE(icygel @ Jul 21 2011, 03:27 PM) thanks bro, actually my original HSF & box is missing & now thinking 1 day if wanna sell my processor must come with original HSF rite? or got ppl will buy the processor alone.. well.. i dont think buying new stupid heatsink will be a good idea..it will only add up the cost. and most ppl wont pay extra.if buy quite good heatsink. then it will be diffrent. ppl might pay extra bucks as the heatsink is better then the stock and if got anyone saying " u need the original heatsink for rma purpose". just say no need. |
|
|
Jul 21 2011, 05:28 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
ashelly no need to screw d fan onto d heatsink. just need to cable tie or use normal wire tie to hang d fan over d +12v eps cable (8 pins) will do.
|
|
|
Jul 21 2011, 08:55 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
not really see the scratches... coz it screw on bottom part of HS...bro ah khoo what do u mean tie on to the 12+ cable?
This post has been edited by fatalynx05: Jul 21 2011, 08:56 PM |
|
|
Jul 21 2011, 09:35 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(fatalynx05 @ Jul 21 2011, 08:55 PM) not really see the scratches... coz it screw on bottom part of HS...bro ah khoo what do u mean tie on to the 12+ cable? hanging from the 12v cpu power pin, cant imagine |
|
|
Jul 21 2011, 09:45 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 21 2011, 08:55 PM) not really see the scratches... coz it screw on bottom part of HS...bro ah khoo what do u mean tie on to the 12+ cable? d 8 pins cable which connected to d mobo bro... |
|
|
Jul 21 2011, 10:54 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 21 2011, 09:45 PM) d 8 pins cable which connected to d mobo bro... huhu i tried but the fan always shaking due to hi air flow...this is a pair of nidec fan btw i finally get to run 3.1ghz on nb, maybe iam noob so a bit hard to get it stable huhu... my ddr kinda act weird on speed above 16xx tried 18xx speed but the ram only detect 1 pcs only another 1 not active (even loose timing )  |
|
|
Jul 21 2011, 11:20 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 21 2011, 10:54 PM) huhu i tried but the fan always shaking due to hi air flow...this is a pair of nidec fan nice clock & time on d pi bro... btw i finally get to run 3.1ghz on nb, maybe iam noob so a bit hard to get it stable huhu... my ddr kinda act weird on speed above 16xx tried 18xx speed but the ram only detect 1 pcs only another 1 not active (even loose timing ) btw, what ram is that? 1700 @ CL5??? awesome!!! |
|
|
Jul 21 2011, 11:45 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 21 2011, 11:20 PM) nice clock & time on d pi bro... my old lousy ram lah bro ADATA btw, what ram is that? 1700 @ CL5??? awesome!!! , i also done cl 4 on this ram... i posted it under LYN DDR3 oc database This post has been edited by fatalynx05: Jul 21 2011, 11:45 PM |
|
|
Jul 21 2011, 11:49 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Jul 21 2011, 11:45 PM) my old lousy ram lah bro ADATA no wonder... hyper inside goodin... , i also done cl 4 on this ram... i posted it under LYN DDR3 oc database |
|
|
Jul 22 2011, 12:01 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 21 2011, 11:49 PM) no wonder... hyper inside goodin... not quite hyper bro the ram kinda like 18xx n below freq... over it and its meragam |
|
|
Jul 22 2011, 08:00 AM
|
|
Junior Member
14 posts Joined: Mar 2010
|
QUOTE(kuntawakaw @ Jul 21 2011, 04:31 PM) my board seems like has issue.. so cant really test.need to change to old board then only can hehe just scared the price is more lower if not come with HSFwahh.. u no sayang ur heatsink ka screw like that. will scratch the heatsink kan? but good thing is 2 fans now well.. i dont think buying new stupid heatsink will be a good idea..it will only add up the cost. and most ppl wont pay extra. if buy quite good heatsink. then it will be diffrent. ppl might pay extra bucks as the heatsink is better then the stock and if got anyone saying " u need the original heatsink for rma purpose". just say no need. |
|
|
Jul 22 2011, 02:52 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(icygel @ Jul 22 2011, 08:00 AM) hehe just scared the price is more lower if not come with HSF usually like that... |
|
|
Jul 23 2011, 07:29 PM
|
Senior Member
2,955 posts Joined: Dec 2007 From: Perth Oz 
|
Hey guys, im trying to OC my Phenom2x3 710, i have OC-ed it to 2.8Ghz without any problem, however when i hit 2.9Ghz...my windows wouldnt boot up anymore. I tried increasing the Cpu voltage by +0.050 but still not booting up. I want to know whether the problem was caused by insufficient voltage or my mobo wasnt good enough for it.
|
|
|
Jul 23 2011, 07:37 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(AlphaBeta @ Jul 23 2011, 07:29 PM) Hey guys, im trying to OC my Phenom2x3 710, i have OC-ed it to 2.8Ghz without any problem, however when i hit 2.9Ghz...my windows wouldnt boot up anymore. I tried increasing the Cpu voltage by +0.050 but still not booting up. I want to know whether the problem was caused by insufficient voltage or my mobo wasnt good enough for it. try increasing more |
|
|
Jul 23 2011, 08:47 PM
|
|
Senior Member
2,955 posts Joined: Dec 2007 From: Perth Oz
|
QUOTE(dafreak @ Jul 23 2011, 07:37 PM) try increasing more i have increased by 1 more level of voltage like u told me to..still not able to boot up windows. Im worry tht i'll fry my CPU if i increase it even more. This post has been edited by AlphaBeta: Jul 23 2011, 09:08 PM |
|
|
Jul 23 2011, 09:25 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
lol...what cooler u using?
try bump it to 1.35v (means +0.25) |
|
|
Jul 23 2011, 09:31 PM
|
|
Senior Member
2,955 posts Joined: Dec 2007 From: Perth Oz
|
QUOTE(dafreak @ Jul 23 2011, 09:25 PM) lol...what cooler u using? hmmm..how is adding 0.25 becoming 1.35? u mean adding 0.025? I tried all the smaller voltage below 0.1. All didnt work. Using stock cooler btw, but don worry bout the temp. Here in aus is now winter...room temp is about 16 degree. Problem is not being able to boot up the windows with that voltage.try bump it to 1.35v (means +0.25) |
|
|
Jul 23 2011, 09:48 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Try eliminating the ram factor also, use a lower ram multiplier
|
|
|
Jul 23 2011, 09:48 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
sorry, my bad...
perhaps it's not the proc, try lowering the ram speed or divider close to stock speed dont leave the HT link in auto as well, get it to about 2000mhz (stock) This post has been edited by dafreak: Jul 23 2011, 09:49 PM |
|
|
Jul 23 2011, 10:01 PM
|
|
Senior Member
2,955 posts Joined: Dec 2007 From: Perth Oz
|
ok i have now lowered my memory clock multiplier to x5...able to run at 2.9ghz now. Mine explain why it has to do with the memory?
|
|
|
Jul 23 2011, 10:26 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(AlphaBeta @ Jul 23 2011, 10:01 PM) ok i have now lowered my memory clock multiplier to x5...able to run at 2.9ghz now. Mine explain why it has to do with the memory? Well it could mean that u got lemon KVR's that could not even oc more than its intended speed.. hence the lock up at 1499mhz.. |
|
|
Jul 23 2011, 10:32 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(AlphaBeta @ Jul 23 2011, 10:01 PM) ok i have now lowered my memory clock multiplier to x5...able to run at 2.9ghz now. Mine explain why it has to do with the memory? well, your ram reached it's speed limit, since it's value ram...so... you may be able to run at those speeds but you will need to loosen the timings a lot |
|
|
Jul 23 2011, 10:45 PM
|
|
Senior Member
2,955 posts Joined: Dec 2007 From: Perth Oz
|
reached it speed limit but why reduce the memory ratio? Wouldnt this reduce the speed even more? lol...
btw...reached 3.3Ghz and running at 37degree....safe to change the FSB even higher? |
|
|
Jul 23 2011, 11:07 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
the limit for your rams are probably lower, since it already passed/close to the limit, it wont be stable..so will bsod/fail boot
|
|
|
Jul 24 2011, 11:12 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(AlphaBeta @ Jul 23 2011, 10:45 PM) reached it speed limit but why reduce the memory ratio? Wouldnt this reduce the speed even more? lol... doesnt mean ur ram speed low that also decreased the performance, 1333mhz also can be a killer when u can put cl 5 on it btw...reached 3.3Ghz and running at 37degree....safe to change the FSB even higher? try oc step by step find the limitation start with max fsb, cpu, nb freq, then ram later u can make the conculison regarding ur hardware for the temp monitor when it full load make sure not exceed 60++c |
|
|
Jul 24 2011, 04:04 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Finally got my 8GB KHX 1600Mhz RAMs at a nice price of RM250 brand new ^^
Now left the processor to go ^^ |
|
|
Jul 24 2011, 05:37 PM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(shinjite @ Jul 24 2011, 04:04 PM) Finally got my 8GB KHX 1600Mhz RAMs at a nice price of RM250 brand new ^^ wow..sounds nice broNow left the processor to go ^^ beli mana ni? |
|
|
Jul 24 2011, 09:53 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Got it from a friend who works in Kingston
|
|
|
Jul 25 2011, 11:51 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(shinjite @ Jul 24 2011, 09:53 PM) Got it from a friend who works in Kingston wah can order 1? ... wait u waiting for push da ram to the max |
|
|
Jul 25 2011, 11:59 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I doubt I will wanna do that
Just wanna run 4Ghz CPU 24/7 with decent RAM speeds is enough |
|
|
Jul 25 2011, 12:07 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(AlphaBeta @ Jul 23 2011, 08:47 PM) i have increased by 1 more level of voltage like u told me to..still not able to boot up windows. Im worry tht i'll fry my CPU if i increase it even more. errr have u disable - any spread spectrum - CnQ - cpu c1e support these features also make some oc not stable |
|
|
Jul 25 2011, 04:13 PM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(AlphaBeta @ Jul 23 2011, 07:29 PM) Hey guys, im trying to OC my Phenom2x3 710, i have OC-ed it to 2.8Ghz without any problem, however when i hit 2.9Ghz...my windows wouldnt boot up anymore. I tried increasing the Cpu voltage by +0.050 but still not booting up. I want to know whether the problem was caused by insufficient voltage or my mobo wasnt good enough for it. try disable CnQ, cpu C1e support and Spread Spectrum like fatalynx05's suggestion.INMM, increase from 2.7GHz to 2.9GHz is not too much and X3 710 could do. if u increase ur bus speed, will increase NB clock as well and need to increase ur NB voltage a bit I bump my X3 720 2.8GHz to 3.5GHz with just 1step voltage increament and it stable which from 1.32v~1.37v (with my Asus mobo about 0.05v per increase IINM. Default voltage 1.32v can juiced my cpu till 3.4GHz only. |
|
|
Jul 26 2011, 03:52 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
AMD's 2012 CPU lineup detailed
http://detail.zol.com.cn/picture_index_682...ex6818532.shtml after zambesi cpu, next will be komodo cpu, which use FM2 socket, means AM3+ socket have short life and no option to upgrade to next generation cpu? |
|
|
Jul 26 2011, 06:42 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(saturn85 @ Jul 26 2011, 03:52 AM) AMD's 2012 CPU lineup detailed What to do, after this they won't be calling them CPU but rather APU http://detail.zol.com.cn/picture_index_682...ex6818532.shtml after zambesi cpu, next will be komodo cpu, which use FM2 socket, means AM3+ socket have short life and no option to upgrade to next generation cpu? |
|
|
Jul 26 2011, 09:35 AM
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(saturn85 @ Jul 26 2011, 03:52 AM) AMD's 2012 CPU lineup detailed Walao wehh, 10 cores nia? Thats crazy.. after zambesi cpu, next will be komodo cpu, which use FM2 socket, means AM3+ socket have short life and no option to upgrade to next generation cpu? |
|
|
Jul 26 2011, 09:41 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(saturn85 @ Jul 26 2011, 03:52 AM) AMD's 2012 CPU lineup detailed arghhh http://detail.zol.com.cn/picture_index_682...ex6818532.shtml after zambesi cpu, next will be komodo cpu, which use FM2 socket, means AM3+ socket have short life and no option to upgrade to next generation cpu? |
|
|
Jul 26 2011, 12:47 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(cloudwan @ Jul 26 2011, 06:42 AM) What to do, after this they won't be calling them CPU but rather APU QUOTE(fatalynx05 @ Jul 26 2011, 09:41 AM) arghhh oh, ya also. feel like AM3+ socket have similar destiny with intel LGA1156 socket, short life. QUOTE(gengstapo @ Jul 26 2011, 09:35 AM) Walao wehh, 10 cores nia? Thats crazy.. yea, super cpu for folding. |
|
|
Jul 26 2011, 01:43 PM
|
Senior Member
3,706 posts Joined: Jul 2011 From: Taiping
|
that suck.................i dun want the am3 socket will short life ...............
|
|
|
Jul 26 2011, 01:51 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
If that is true then it's really sadding. Am3+ has yet to be launched then they are prepin for new socket to replace am3+ on next year? Pls dont do an Intel AMD...
|
|
|
Jul 26 2011, 02:00 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(primaroti @ Jul 26 2011, 01:43 PM) that suck.................i dun want the am3 socket will short life ............... QUOTE(ah_khoo @ Jul 26 2011, 01:51 PM) If that is true then it's really sadding. Am3+ has yet to be launched then they are prepin for new socket to replace am3+ on next year? Pls dont do an Intel AMD... Take it with a grain of salt yoo, they say 2012 but don't say when, it could even be on December 2012 yoo, bwahahahaha If u already have AM3+ just enjoy lor, the builtin GPU is only a surplus if u already using a CFx rig |
|
|
Jul 26 2011, 02:14 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Enjoy AM3+ while it lasts man.....
|
|
|
Jul 26 2011, 08:00 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Jul 26 2011, 01:51 PM) If that is true then it's really sadding. Am3+ has yet to be launched then they are prepin for new socket to replace am3+ on next year? Pls dont do an Intel AMD... i felt down already hahahah QUOTE(shinjite @ Jul 26 2011, 02:14 PM) Enjoy AM3+ while it lasts man..... how to enjoy without BD |
|
|
Jul 26 2011, 08:33 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
no point complaining about socket change though...
IMO, no doubt that it is a good thing for consumers by maintaining similar sockets (AM2 > AM2+ > AM3 > AM3+) but I think that is what is limiting them in terms of how much they can do...i think they realise that too... Look at inhell as an example, a new socket gave them a huge boost and perhaps more flexibility This post has been edited by dafreak: Jul 26 2011, 08:33 PM |
|
|
Jul 26 2011, 08:33 PM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(fatalynx05 @ Jul 26 2011, 08:00 PM) i felt down already hahahah Hahaha.. how to enjoy without BD perhaps AM2+ mobo can survive for last 6months QUOTE(dafreak @ Jul 26 2011, 08:33 PM) no point complaining about socket change though... Sometimes, we must sacrifice some features to ensure that older tech can survive IMO, no doubt that it is a good thing for consumers by maintaining similar sockets (AM2 > AM2+ > AM3 > AM3+) but I think that is what is limiting them in terms of how much they can do...i think they realise that too... Look at inhell as an example, a new socket gave them a huge boost and perhaps more flexibility This post has been edited by lat_lonelyboyz: Jul 26 2011, 08:37 PM |
|
|
Jul 26 2011, 08:54 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(lat_lonelyboyz @ Jul 26 2011, 08:33 PM) Hahaha.. Sometimes keeping old tech survive is what kept them being 2nd best, thats not gonna do much good to their bottomline also.. perhaps AM2+ mobo can survive for last 6months Sometimes, we must sacrifice some features to ensure that older tech can survive U just knoe lah how many inhell only users in d world bragging bout benchmark, benchmark & benchmark to prove their worth Change is somtimes needed |
|
|
Jul 26 2011, 09:48 PM
|
|
Senior Member
2,955 posts Joined: Dec 2007 From: Perth Oz
|
i hope AMD 10 cores cpu has good performance...don wanna see reviews like i3 beating x6 tier cpu flooding the net..
|
|
|
Jul 26 2011, 10:08 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(lat_lonelyboyz @ Jul 26 2011, 08:33 PM) Hahaha.. stick with old tech and you will die outperhaps AM2+ mobo can survive for last 6months Sometimes, we must sacrifice some features to ensure that older tech can survive sometimes (or most times) it is not about the features, but the improved efficiency, performance etc |
|
|
Jul 26 2011, 10:22 PM
|
Senior Member
578 posts Joined: Jul 2008 From: KL & PJ
|
if socket change...no bulldozer for me...
|
|
|
Jul 26 2011, 11:18 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(dafreak @ Jul 26 2011, 10:08 PM) stick with old tech and you will die out i agreed.. for me every upgrade have it own unique way tame it... the most valueble experience and knowledge is what we count sometimes (or most times) it is not about the features, but the improved efficiency, performance etc oh well...if its gonna end of am3 era let it be.. maybe its the new AMD step to gain back what they left and loss a couples years ago |
|
|
Jul 26 2011, 11:31 PM
|
|
Junior Member
231 posts Joined: May 2009
|
No am3+ for me then...Waiting for the new socket for my next upgrade
|
|
|
Jul 27 2011, 12:47 AM
|
|
Senior Member
1,625 posts Joined: Jul 2009 From: PENANG - IPOH
|
QUOTE(dafreak @ Jul 26 2011, 10:08 PM) stick with old tech and you will die out For pride and benchmarking, INDEED. will die if stick with old tech sometimes (or most times) it is not about the features, but the improved efficiency, performance etc But for satisfaction, nowadays AM3 still worth it..IMPO |
|
|
Jul 27 2011, 09:46 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
My next one would be after AM3+
Current AM3 socket is good enough ^^ |
|
|
Jul 27 2011, 03:26 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(AlphaBeta @ Jul 26 2011, 09:48 PM) i hope AMD 10 cores cpu has good performance...don wanna see reviews like i3 beating x6 tier cpu flooding the net.. haha, this one can be software related also. QUOTE(redzwan @ Jul 26 2011, 10:22 PM) if socket change...no bulldozer for me... QUOTE(haziqk10 @ Jul 26 2011, 11:31 PM) No am3+ for me then...Waiting for the new socket for my next upgrade QUOTE(shinjite @ Jul 27 2011, 09:46 AM) My next one would be after AM3+ if komodo apu come on december 2012,Current AM3 socket is good enough ^^ i think still acceptable to get am3+. This post has been edited by saturn85: Jul 27 2011, 03:47 PM |
|
|
Jul 27 2011, 11:48 PM
|
Senior Member
540 posts Joined: Aug 2007
|
So is FM2 gonna be LGA?
|
|
|
Jul 28 2011, 12:54 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(cllee86 @ Jul 27 2011, 11:48 PM) So is FM2 gonna be LGA? Don't think so, maybe something like FM1 on Llano.. =) |
|
|
Jul 28 2011, 01:01 AM
|
Junior Member
300 posts Joined: Feb 2010
|
i still thinking to upgrade my procs, if i want to sell it, wht is the suitable price? detail at my siggy
|
|
|
Jul 28 2011, 02:24 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(cllee86 @ Jul 27 2011, 11:48 PM) So is FM2 gonna be LGA? it's just a RUMOUR, just wait till the time comes |
|
|
Jul 28 2011, 03:59 AM
|
|
Senior Member
540 posts Joined: Aug 2007
|
QUOTE(cloudwan @ Jul 28 2011, 12:54 AM) Don't think so, maybe something like FM1 on Llano.. =) Haiz..I was hoping they would go LGA like their Opteron CPU's QUOTE(dafreak @ Jul 28 2011, 02:24 AM) it's just a RUMOUR, just wait till the time comes Hey..its a valid question rite.. |
|
|
Jul 29 2011, 10:40 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
|
|
|
Jul 30 2011, 12:27 AM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
Did i contribute something in here before? urrmmm not really rite?
|
|
|
Jul 30 2011, 04:20 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(verdict @ Jul 30 2011, 12:27 AM) Did i contribute something in here before? urrmmm not really rite? try out some Llano cpu. |
|
|
Aug 2 2011, 05:54 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
any1 got LIano here...?
maybe can share some benchies  |
|
|
Aug 4 2011, 04:44 PM
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
hye huys. need some advice regarding to OC phenomII X4 945.
lazy to stress test, so me just test with some game like grid and CS condition zero. suddenly game crash. my setting at bios is stock voltage for all. fsb--> 225*15 = 3375 @ 3.37Ghz nb freq 2250Mhz HT link 2000Mhz winova xtune set at divider 1600 CL9 @ 1800 CL9 my pc spec : hyper 212+ phenomII X4 945 Asus M4A87TD/USB3 2Gb*2 winova ddr1600 xtune powercolor 3850 512d3 WD GC 1Tb psu ST56F what else should i do. do i really need to pump voltage on VNB? i just want to get the best OC on stock voltage. thanks |
|
|
Aug 4 2011, 05:32 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
fastest way to check whether it's d imc causing stability > lower d imc multi by a notch & check whether u still gettin crashes in games.
|
|
|
Aug 4 2011, 07:02 PM
|
|
Junior Member
231 posts Joined: May 2009
|
Try increase the cpu-nb voltage abit.
And your ram at 1600mhz or 1800mhz?? You proc is c2 or c3 stepping?? |
|
|
Aug 4 2011, 07:04 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(ah_khoo @ Aug 4 2011, 05:32 PM) fastest way to check whether it's d imc causing stability > lower d imc multi by a notch & check whether u still gettin crashes in games. imc means nb freq, right? in other word, to get stable i have to increase the nb volt? because if i lower the nb, let say from 2250Mhz to 2000Mhz, the perfomance is reduce. i just run the AIDA64 memory benchmark. so if ther perfomance reduce compare to higher nb freq, i think better keep my setting at stock... but no fun if stock. lol. very gian to OC...QUOTE(haziqk10 @ Aug 4 2011, 07:02 PM) Try increase the cpu-nb voltage abit. 1800Mhz CL9 with stock voltage 1.5vdimm. mine is C3 steppingAnd your ram at 1600mhz or 1800mhz?? You proc is c2 or c3 stepping??  This post has been edited by lengchai86: Aug 4 2011, 07:10 PM |
|
|
Aug 4 2011, 07:56 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 4 2011, 07:04 PM) imc means nb freq, right? in other word, to get stable i have to increase the nb volt? because if i lower the nb, let say from 2250Mhz to 2000Mhz, the perfomance is reduce. i just run the AIDA64 memory benchmark. so if ther perfomance reduce compare to higher nb freq, i think better keep my setting at stock... but no fun if stock. lol. very gian to OC... if ur ram are above 1600mhz it is best to set imc speed around 2600-2800 but make sure ur proc speed also equivalent with it otherwise there is no1800Mhz CL9 with stock voltage 1.5vdimm. mine is C3 stepping extra gain of performance below are example of 18xxmhz with 3ghz of imc usually i apply : 2200mhz 1.225v 2500mhz-2600mhz 1.26-1.275v 2800mhz-3100mhz 1.3v-1.375v (depend of proc speed) usually if the proc speed hit 4ghz barrier it require a lot of volt for imc coz it fully utilize the speed of imc just my noob experience  |
|
|
Aug 4 2011, 09:52 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
amd got suggest cpu nb clock at least = 3 x dram clock.
example: for your DDR3 1600. dram clock = 800mhz, cpu nb clock = 3 x 800 = 2400mhz. so cpu nb clock should be at least 2400mhz. |
|
|
Aug 4 2011, 11:46 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
ok guys. please tell me in the bios, which one is imc?
stdd without OC » Click to show Spoiler - click again to hide... « OC setting » Click to show Spoiler - click again to hide... « fsb increase from 200-->225 ram increase from 1600-->1800MHz cpu/nb freq increase 2000-->2250MHz HT link speed 2250, i set lower multi to 2025MHz increase the cpu/nb voltage 1.2-->1.2125V (4 step if not mistaken) nb voltage is for what? this is stock 1.1V (range 1.1V - 1.25V) and for the HT, i must keep it below 2K, means it shouldn't be above 2k right? so if i need to pump voltage, what is the safe voltage for cpu/nb, CPU and ram? This post has been edited by lengchai86: Aug 6 2011, 03:16 AM |
|
|
Aug 4 2011, 11:50 PM
|
|
Junior Member
231 posts Joined: May 2009
|
QUOTE(lengchai86 @ Aug 4 2011, 07:04 PM) 1800Mhz CL9 with stock voltage 1.5vdimm. mine is C3 stepping You can try fatalynx05 suggestion. Be sure to test stability using prime95 or running bf2. Bf2 can be used to test your system stability. It is my personal opinion though. Added on August 4, 2011, 11:56 pmImc is the cpu-nb voltage. You are safe up to 1.55v. However I would like mine to be around 1.3-1.35v. This post has been edited by haziqk10: Aug 4 2011, 11:56 PM |
|
|
Aug 5 2011, 12:15 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(haziqk10 @ Aug 4 2011, 11:50 PM) Imc is the cpu-nb voltage. You are safe up to 1.55v. mine is only from However I would like mine to be around 1.3-1.35v. from both, i only have prime95. btw what i bf2? sory to many noob Questions edited : 1.2-1.4V is for HT voltage This post has been edited by lengchai86: Aug 6 2011, 03:18 AM |
|
|
Aug 5 2011, 12:25 AM
|
|
Junior Member
231 posts Joined: May 2009
|
bf2 - battlefield 2 bad company
The reason why i said it can be used to test the stability is because there is one time in the past my oc pass 12 hours of prime95 but bsod when playing bf2. This post has been edited by haziqk10: Aug 5 2011, 12:28 AM |
|
|
Aug 5 2011, 12:38 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
owh. i didn't have that game. basically, how long i should run the prime test, i mean minimum hours. because i'm running prime right now, if stable in minimum time requirement, i want to try higher clock
. very fun during finding highest stable speed now just past 1024k update: after 1 hour prime95, i try to re-run WEI but bsod occur when the assesment is just about to finish. what should i do 1st. increase dram voltage or cpu/nb voltage first This post has been edited by lengchai86: Aug 5 2011, 01:17 AM |
|
|
Aug 5 2011, 03:49 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 5 2011, 12:38 AM) owh. i didn't have that game. basically, how long i should run the prime test, i mean minimum hours. because i'm running prime right now, if stable in minimum time requirement, i want to try higher clock u should oc by stage bro... find the max for fsb then cpu after that cpu-nb then ram...from that u know ur hardware limitation and have better target . very fun during finding highest stable speed now just past 1024k update: after 1 hour prime95, i try to re-run WEI but bsod occur when the assesment is just about to finish. what should i do 1st. increase dram voltage or cpu/nb voltage first |
|
|
Aug 5 2011, 04:42 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(fatalynx05 @ Aug 5 2011, 03:49 AM) u should oc by stage bro... find the max for fsb then cpu after that cpu-nb then ram...from that u know ur hardware limitation and have better target » Click to show Spoiler - click again to hide... « so this is my previous highest fsb = 265 with 1.5VCore. but this is using previous 1333MHz KVR 2Gbx2. HT link lower to 18**, oso the cpu/nb freq set to 18** because i didnt know that cpu/nb can be set higher than HT link at that time. plus, i didn't try with lower cpu multiplier yet. so basically i think the fsb is not the wall if i want to use current proc multiplier (*15) i'll not find the stable setting for this highest fsb bootable because its 1.5vcore. highest i dare to use is 1.4vcore only. so i want to find the best setting between 3.4-3.7Ghz cpu clock if possible. even 3.4GHz oso got bsod...how to find the ram limitation and cpu/nb limitation? thanks for helping me This post has been edited by lengchai86: Aug 5 2011, 12:35 PM |
|
|
Aug 5 2011, 04:54 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
cpu-nb no problem at all.
Voltage for certain speed is almost the same at any htt x multi for ram, low down cpu and cpu-nb. test anyway u like. prime with min FFT = 1024 max FFT = 4096 memory use 3072MB or higher. use all ram if possible minute = 3. this is my preference. might not be the best but works for me. cpu-nb volt 1.55v is consider very high already i think. last time i bench with 1.6v for short time (and only superpi) i can feel its like deteriorate. some motherboard will show red even at 1.35v |
|
|
Aug 5 2011, 11:44 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
low down the cpu multi? ok just lower it abit, increase htt a.k.a fsb a bit, ram reach over 1800MHz. suddenly bsod during stress tess, what to do. increase cpu/nb voltage or dram voltage?
|
|
|
Aug 5 2011, 11:59 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(lengchai86 @ Aug 5 2011, 11:44 AM) low down the cpu multi? ok just lower it abit, increase htt a.k.a fsb a bit, ram reach over 1800MHz. suddenly bsod during stress tess, what to do. increase cpu/nb voltage or dram voltage? timing? set the cpu and cpu-nb close to stock. increase dram voltage up to 1.65v (this is a safe volt.. u can go higher with no prob) increase cpu-nb voltage to 1.25v now push the ram.. what timing is that? |
|
|
Aug 5 2011, 12:32 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
 now HTT is 238*13 = 3094MHz HT link and cpu/nb = 1910MHz RAM = 1910MHz with CL9 dram voltage 1.55V, cpu/nb voltage 1.22V. i'll increase again after this |
|
|
Aug 5 2011, 12:37 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 5 2011, 12:32 PM) now HTT is 238*13 = 3094MHz HT link and cpu/nb = 1910MHz RAM = 1910MHz with CL9 dram voltage 1.55V, cpu/nb voltage 1.22V. i'll increase again after this and please dont kill ur proc with that voltage huhuh...better keep below 1.5v for 24/7 use |
|
|
Aug 5 2011, 12:43 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(fatalynx05 @ Aug 5 2011, 12:37 PM) u can try what dato kunta said... btw 3.9ghz on 1.5v kinda high is it... try set to 1.45v and up the cpu vdda to 2.56-2.6 it should be stable, hehe. just want to find highest clock for fun at that time. never use it. after reach 3.9, then set to stock back. now just begin to find optimum OC. urm...what is cpu vdda?and please dont kill ur proc with that voltage huhuh...better keep below 1.5v for 24/7 use |
|
|
Aug 5 2011, 12:46 PM
|
Senior Member
916 posts Joined: Dec 2008 From: nippon
|
 clock using Asus turbo unlocker |
|
|
Aug 5 2011, 02:08 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Placed my order for a 1090T already
|
|
|
Aug 5 2011, 08:11 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(lengchai86 @ Aug 5 2011, 12:43 PM) hehe. just want to find highest clock for fun at that time. never use it. after reach 3.9, then set to stock back. now just begin to find optimum OC. urm...what is cpu vdda? abang fatalynx is hardcore tweaker.. he played with all kind of voltagesim not really sure about the vdda.its something that if increase, it stabilize the vcore supplied to ur processor. correct me if im wrong.i used adjust this back then if when using high vcore for quick bench. QUOTE(shinjite @ Aug 5 2011, 02:08 PM) Placed my order for a 1090T already nice2..fast2 update us with results.. esp the imc..kekekekeThis post has been edited by kuntawakaw: Aug 5 2011, 08:12 PM |
|
|
Aug 5 2011, 11:23 PM
|
|
Senior Member
578 posts Joined: Jul 2008 From: KL & PJ
|
okay...here is my OC on phenom x2 555 BE..
OC setting HTT 240 *16 HT link and nb = 240*9 ram = 1333 mushkin 4gb stick mobo = MSI 760GM-p33 will stress later... This post has been edited by redzwan: Aug 5 2011, 11:23 PM |
|
|
Aug 6 2011, 01:41 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
i still can't find the vdda thingy. just now, i set the fsb a.k.a htt @ 250*12=3000MHz.
ram reach 2000MHz with 1.65Vdram (my mobo oredy show red in 1.58Vdram) but can't boot at all. so is this ram limit with timing CL9? i lower the htt to 240 but with multi 13, 240*13=3130Mhz, ram at 1926 CL9 with 1.60Vdram, able to boot. any suggestion? or the htt*multi must not lower than stock clock for the proc? » Click to show Spoiler - click again to hide... « This post has been edited by lengchai86: Aug 6 2011, 01:51 AM |
|
|
Aug 6 2011, 02:03 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
with deneb. there is near to impossible to get 2000Mhz ram
the reason to lower down the cpu clock is to eliminate the possibility that cpu clock not stable.. so that u can identify the problem is the ram as other clock leave at stock. test with stress test? if yes.. now u already know ur ram speed limit. if u want to oc the ram further, try tightening the timings. if not, proceed with CPU-NB clock. |
|
|
Aug 6 2011, 02:15 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
just now using this setting :
235*15=3525Mhz with 1.35VCore ram and HT link : 1878MHz with 1.57Vdram then BSOD before able to run prome95. now tryin the same setting with 1.6VDram. or any suggestion? tightening the ram timing will need a higher vdram right? is it CL9 is still not tight enough? every setting that i apply is using the same timing CL9 (9-9-9-28-39-1T) This post has been edited by lengchai86: Aug 6 2011, 02:37 AM |
|
|
Aug 6 2011, 02:27 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
cpu-nb at 2.5v? go look again..which voltage is that.
cpu-nb stocked at 1.1v (some proc 1.175v) and no way u can increase it up to 2.5v. with deneb, u are safe to go up to 1.75v (this is my preference.. u may set ur limit to 1.65v) quick stress test with prime 1min. around 15mins ok already. quick test not really stable but useful when u still searching the limit. |
|
|
Aug 6 2011, 02:36 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(kuntawakaw @ Aug 6 2011, 02:27 AM) cpu-nb at 2.5v? go look again..which voltage is that. ops sory its not 2.5, its 1.25V. my mobo have range between 0.*-1.9V for voltage cpu/nb.. really sorry typo. trying to stress with prime95 (blend), about 3 minutes got BSOD oso after 1.6VDram...cpu-nb stocked at 1.1v (some proc 1.175v) and no way u can increase it up to 2.5v. with deneb, u are safe to go up to 1.75v (this is my preference.. u may set ur limit to 1.65v) quick stress test with prime 1min. around 15mins ok already. quick test not really stable but useful when u still searching the limit. This post has been edited by lengchai86: Aug 6 2011, 03:14 AM |
|
|
Aug 6 2011, 03:03 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
cant really figure what problem u have here..as dont know the ram capability.
ok..back the dram to 1800mhz only. increase the htlink multi to 9. leave other value near to stock and prime again.. see if still occur. remember to do things slowly.. straight away jump to high clock not advisable |
|
|
Aug 6 2011, 03:26 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
value for CL oso leave to stock @ CL11? with 1.5 vdimm?
oredy set HT link to *9 now using this setting : htt*multi : 225*13=2934MHz (stock 3000MHz) HT link and cpu/nb : 2031Mhz ram : 1800 CL9 1.5vdimm now prime with min FFT = 1024 max FFT = 4096 memory use 4096MB minute = 3 This post has been edited by lengchai86: Aug 6 2011, 03:59 AM |
|
|
Aug 6 2011, 04:00 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
suddenly this happen. why?
» Click to show Spoiler - click again to hide... « |
|
|
Aug 6 2011, 08:39 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Normally this happens when there is lack of voltage
|
|
|
Aug 6 2011, 10:49 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 6 2011, 04:00 AM) suddenly this happen. why? maybe cpu-nb speed not stable or ram... if cpu usually the system will restart.. » Click to show Spoiler - click again to hide... « hard to guess lah what setting u set on? |
|
|
Aug 6 2011, 01:19 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(fatalynx05 @ Aug 6 2011, 10:49 AM) maybe cpu-nb speed not stable or ram... if cpu usually the system will restart.. htt*multi : 225*13=2934MHz (stock 200*15=3000MHz) hard to guess lah what setting u set on? HT link : *9 HT link and cpu/nb : 2031Mhz ram : 1800 CL9 1.5vdimm all stock voltage. if system not stable, what should i do. increase ram voltage or cpu/nb voltage? my ram show yellow at 1.58V, red at 1.60**V |
|
|
Aug 6 2011, 01:22 PM
|
|
Junior Member
231 posts Joined: May 2009
|
QUOTE(lengchai86 @ Aug 6 2011, 04:00 AM) suddenly this happen. why? Increase the cpu-nb voltage maybe.» Click to show Spoiler - click again to hide... « |
|
|
Aug 6 2011, 03:25 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
update : using almost the same setting as before
htt*multi : 225*13=2934MHz (stock 200*15=3000MHz) HT link : *9 HT link and cpu/nb : 2031Mhz ram : 1800 CL9 1.55vdimm cpu/nb 1.25V passed prime95. » Click to show Spoiler - click again to hide... « so i guess i ram is stable at 1.55Vdimm with 1800Mhz CL9 right? so do i need to adjust multi proc to *15 or try for *14 first? htt a.k.a fsb : 225*14=3150MHz This post has been edited by lengchai86: Aug 6 2011, 03:33 PM |
|
|
Aug 6 2011, 04:15 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 6 2011, 03:25 PM) update : using almost the same setting as before just for your info aslong the ram run under 1.7v can consider safe and 1.5v for cpu-nb (actually only required around 1.35v for mild oc) htt*multi : 225*13=2934MHz (stock 200*15=3000MHz) HT link : *9 HT link and cpu/nb : 2031Mhz ram : 1800 CL9 1.55vdimm cpu/nb 1.25V passed prime95. » Click to show Spoiler - click again to hide... « so i guess i ram is stable at 1.55Vdimm with 1800Mhz CL9 right? so do i need to adjust multi proc to *15 or try for *14 first? htt a.k.a fsb : 225*14=3150MHz good luck and nice job there |
|
|
Aug 6 2011, 05:31 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
i think increasing the cpu/nb voltage to 1.25V is really work. now oredy passed prime95 for almost 2 hours. will increase the cpu multi to *15. see how is it going. hopefully stable
Added on August 6, 2011, 8:00 pmjust now, pc suddenly restart after 30minutes prime. i'm using this setting: htt*multi : 225*15=3375MHz HT link : *9 = 2025Mhz, stock HT link voltage cpu/nb : 2250Mhz with 1.25V ram : 1800 CL9 with 1.55vdimm now increasing vdimm voltage to 1.57V, This post has been edited by lengchai86: Aug 6 2011, 08:00 PM |
|
|
Aug 6 2011, 08:12 PM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
QUOTE(lengchai86 @ Aug 6 2011, 05:31 PM) i think increasing the cpu/nb voltage to 1.25V is really work. now oredy passed prime95 for almost 2 hours. will increase the cpu multi to *15. see how is it going. hopefully stable did u tweak ur cpu voltage?Added on August 6, 2011, 8:00 pmjust now, pc suddenly restart after 30minutes prime. i'm using this setting: htt*multi : 225*15=3375MHz HT link : *9 = 2025Mhz, stock HT link voltage cpu/nb : 2250Mhz with 1.25V ram : 1800 CL9 with 1.55vdimm now increasing vdimm voltage to 1.57V, |
|
|
Aug 6 2011, 08:19 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 6 2011, 05:31 PM) i think increasing the cpu/nb voltage to 1.25V is really work. now oredy passed prime95 for almost 2 hours. will increase the cpu multi to *15. see how is it going. hopefully stable good for u... just make sure ur nb n mosfet temp is ok otherwise it also became unstable Added on August 6, 2011, 8:00 pmjust now, pc suddenly restart after 30minutes prime. i'm using this setting: htt*multi : 225*15=3375MHz HT link : *9 = 2025Mhz, stock HT link voltage cpu/nb : 2250Mhz with 1.25V ram : 1800 CL9 with 1.55vdimm now increasing vdimm voltage to 1.57V, |
|
|
Aug 6 2011, 10:52 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(fatalynx05 @ Aug 6 2011, 08:19 PM) good for u... just make sure ur nb n mosfet temp is ok otherwise it also became unstable from this hwmonitor, which one is mosfet and nb temp? Added on August 7, 2011, 12:03 amhtt*multi : 225*15=3375MHz HT link : *9 = 2025Mhz, stock HT link voltage cpu/nb : 2250Mhz with 1.28V ram : 1800 CL9 with 1.57vdimm bsod again... hurmmm. any suggestion. please help me. This post has been edited by lengchai86: Aug 7 2011, 12:03 AM |
|
|
Aug 7 2011, 05:44 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 6 2011, 10:52 PM) from this hwmonitor, which one is mosfet and nb temp? Usually mosfet been monitored by manufacture 3rd party apps...or some mobo dont have sensor probe for itAdded on August 7, 2011, 12:03 amhtt*multi : 225*15=3375MHz HT link : *9 = 2025Mhz, stock HT link voltage cpu/nb : 2250Mhz with 1.28V ram : 1800 CL9 with 1.57vdimm bsod again... hurmmm. any suggestion. please help me. U have to use traditional method by using ur hand huhu.. |
|
|
Aug 8 2011, 12:37 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
again, pII 945 X4
htt*multi : 225*15=3375MHz, stock vcore 1.35V HT link : *8 = 1800Mhz, stock HT link voltage cpu/nb : 1800Mhz with 1.25V ram : 1500 CL9 with 1.5vdimm, bsod after 1 1/2 hours prime95. now increase vdimm to 1.55 see how... This post has been edited by lengchai86: Aug 8 2011, 12:38 AM |
|
|
Aug 8 2011, 01:12 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 8 2011, 12:37 AM) again, pII 945 X4 is it ur ram is already loose no need to applied more voltage... u can use memtest86 to test the ram 1st htt*multi : 225*15=3375MHz, stock vcore 1.35V HT link : *8 = 1800Mhz, stock HT link voltage cpu/nb : 1800Mhz with 1.25V ram : 1500 CL9 with 1.5vdimm, bsod after 1 1/2 hours prime95. now increase vdimm to 1.55 see how... for cpu/nb optimized speed is (ram speed * 3 = cpu/nb) it should be around 2250mhz and it must be higher then HT speed, good luck |
|
|
Aug 8 2011, 03:09 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
 why my asus turbo doesn't have the vdda thingy? QUOTE(fatalynx05 @ Aug 8 2011, 01:12 AM) is it ur ram is already loose no need to applied more voltage... u can use memtest86 to test the ram 1st wow thanks. really need that advice for cpu/nb optimized speed is (ram speed * 3 = cpu/nb) it should be around 2250mhz and it must be higher then HT speed, good luck so the cpu/nb speed should be higher that HT link speed? i thought my setting is ok to find the proc limit, so i set the others lower than stock. the way i use lower cpu/nb is to make sure its stable with lower speed. and the ram volt is no need to pump if i use lower divider? thanks bro This post has been edited by lengchai86: Aug 8 2011, 03:17 AM |
|
|
Aug 8 2011, 07:04 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
if you are looking for your proc limit, just keep it close to stock
|
|
|
Aug 8 2011, 09:43 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 8 2011, 03:09 AM) why my asus turbo doesn't have the vdda thingy? wow thanks. really need that advice so the cpu/nb speed should be higher that HT link speed? i thought my setting is ok to find the proc limit, so i set the others lower than stock. the way i use lower cpu/nb is to make sure its stable with lower speed. and the ram volt is no need to pump if i use lower divider? thanks bro btw what dafreak said it rite try to set others close to stock if wannatest proc limitation.. |
|
|
Aug 8 2011, 10:14 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lengchai86 @ Aug 8 2011, 03:09 AM) why my asus turbo doesn't have the vdda thingy? wow thanks. really need that advice so the cpu/nb speed should be higher that HT link speed? i thought my setting is ok to find the proc limit, so i set the others lower than stock. the way i use lower cpu/nb is to make sure its stable with lower speed. and the ram volt is no need to pump if i use lower divider? thanks bro imc multi should be always at least 1x higher than ht link multi. as for ram, just keep it @ its rated speed or somewhere there will do. |
|
|
Aug 8 2011, 10:58 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Aug 8 2011, 10:14 AM) can u see those voltages in bios? if yes, u mite wanna check whether there's any update version of turbo-v. d one comes with d cd not always d latest one. if those voltages are not visible in BIOS, u can virtually give up ledi. but worry not, those voltages are not so critical imo, what u needed most are ledi there, vcore, vdimm, vimc, vnb & vhtt. True true, agree with khoo tho lengchai needs to keep in mind tho that deneb IMC is not that refine as thuban IMC in pushing those ram clocks imc multi should be always at least 1x higher than ht link multi. as for ram, just keep it @ its rated speed or somewhere there will do. |
|
|
Aug 8 2011, 11:12 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Aug 8 2011, 10:58 AM) True true, agree with khoo tho lengchai needs to keep in mind tho that deneb IMC is not that refine as thuban IMC in pushing those ram clocks yup, deneb/propus max out around 1900, any higher it's really hard to tame 'em @ P95. » Click to show Spoiler - click again to hide... « |
|
|
Aug 8 2011, 11:26 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Aug 8 2011, 11:12 AM) yup, deneb/propus max out around 1900, any higher it's really hard to tame 'em @ P95. Yup still remember oc'ing using my old deneb 720BE & 955BE, ram oc'ing aint that fun » Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... « |
|
|
Aug 8 2011, 11:43 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Aug 8 2011, 11:26 AM) Yup still remember oc'ing using my old deneb 720BE & 955BE, ram oc'ing aint that fun yup, but Llano is funnier than Thuban, thou BD mite be d funniest. DDR3 2400~2500 on Llano seems yummy for sure... » Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... « |
|
|
Aug 8 2011, 02:57 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Aug 8 2011, 11:43 AM) yup, but Llano is funnier than Thuban, thou BD mite be d funniest. DDR3 2400~2500 on Llano seems yummy for sure... sure worth it or not to play with LIano? if yes i wanna try lah » Click to show Spoiler - click again to hide... « |
|
|
Aug 8 2011, 03:46 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(fatalynx05 @ Aug 8 2011, 02:57 PM) sure worth it or not to play with LIano? if yes i wanna try lah Can use Llano on ur TUF ka? |
|
|
Aug 8 2011, 04:08 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
according to this ss, what is exactly my proc temp?
» Click to show Spoiler - click again to hide... « A) 1 & 4 B) 2 & 5 C) 3 and what is max temp is safe for this deneb? |
|
|
Aug 8 2011, 04:21 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I would see B (2&5), the individual core temps instead of A
|
|
|
Aug 8 2011, 05:43 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
2/5 is from cpu diode, normally we will use 1/4
|
|
|
Aug 8 2011, 07:47 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(cloudwan @ Aug 8 2011, 03:46 PM) Can use Llano on ur TUF ka? sure cannot lah bro huhu... wanna setup 2nd pc for movie playback.. and oc abit Added on August 8, 2011, 7:52 pm QUOTE(lengchai86 @ Aug 8 2011, 04:08 PM) according to this ss, what is exactly my proc temp? just make it simple.. dont exceed more then 60c for core temp (2&5) or u will burn ur proc internally » Click to show Spoiler - click again to hide... « A) 1 & 4 B) 2 & 5 C) 3 and what is max temp is safe for this deneb? the tj max temp for phenom is 62c ... This post has been edited by fatalynx05: Aug 8 2011, 07:52 PM |
|
|
Aug 8 2011, 11:31 PM
|
|
Junior Member
231 posts Joined: May 2009
|
I would use A) 1 & 4
|
|
|
Aug 9 2011, 01:14 AM
|
Junior Member
424 posts Joined: Jul 2011 
|
ermm.... reading from page 1 to 13... i dont understand a thing how to oc my setting.. or maybe i just used as is... huhuuuu
Damn OC is hard to understand. This is my setup what can i do to oc this? Amd Phenom II X6 1100t Asus CrossHair V Formula Kingston Hyper X 1600 8GB with ram cooler Sapphire 6950 x 2 Xfire Corsair Force3 120Gb SSD And Corsair Hydro Series H80 After install all the Asus Utilitise software OC is way2 too complicated.. Read also still dont know how to do it |
|
|
Aug 9 2011, 01:58 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(Norazam @ Aug 9 2011, 01:14 AM) Amd Phenom II X6 1100t very high end spec there. btw i suggest you to have a look at your bios 1st. this is mine Asus CrossHair V Formula Kingston Hyper X 1600 8GB with ram cooler Sapphire 6950 x 2 Xfire Corsair Force3 120Gb SSD And Corsair Hydro Series H80 » Click to show Spoiler - click again to hide... « you can find in your bios that something similar with mine which has cpu bus freq, nb, ht link, voltage setting etc. yours is BE edition. the special of BE is you can OC by increasing the cpu multiplier or cpu ratio. other way, you can increase the fsb or htt. but we need to increase step by step in small amount. every step we need to boot into windows This post has been edited by lengchai86: Aug 9 2011, 02:03 AM |
|
|
Aug 9 2011, 02:29 PM
|
|
Junior Member
110 posts Joined: Jan 2011
|
i hav a question to all sifus here. my aim is to maintain my tdp. is it that if i do not increase vcore the max tdp will always be the same althought the clock increase? i am refering to brisbane 4400+ thanks in advance
|
|
|
Aug 9 2011, 06:47 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lenzmark @ Aug 9 2011, 02:29 PM) i hav a question to all sifus here. my aim is to maintain my tdp. is it that if i do not increase vcore the max tdp will always be the same althought the clock increase? i am refering to brisbane 4400+ thanks in advance TDP is like the amount of power n heat the proc can produce.. if the proc produce more heat n power then its TDP it will throttling down (in some cases).. and it also depend of mobo, some of it can handle more then stock TDP and once u oc it will also increase the heat n powah (TDP) till hit the wallexample mine X6 1090T come with 125W TDP once oc till 4.1ghz it increased to 139.2W so any further can cause system failure or instability (coz i have bad chip) This post has been edited by fatalynx05: Aug 9 2011, 06:54 PM |
|
|
Aug 9 2011, 07:34 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(lenzmark @ Aug 9 2011, 02:29 PM) i hav a question to all sifus here. my aim is to maintain my tdp. is it that if i do not increase vcore the max tdp will always be the same althought the clock increase? i am refering to brisbane 4400+ thanks in advance there is a tdp formula,but i not sure how accurate is it: http://www.techpowerup.com/forums/showthread.php?t=138093 tdp = (stock tdp)(clock/stock clock)((voltage/stock voltage)^2) |
|
|
Aug 9 2011, 08:29 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(lenzmark @ Aug 9 2011, 02:29 PM) i hav a question to all sifus here. my aim is to maintain my tdp. is it that if i do not increase vcore the max tdp will always be the same althought the clock increase? i am refering to brisbane 4400+ thanks in advance i did some test on the thermal last time. check herefrom there.. there is no choice..if u want to overclock u must lower the vcore from stock. (yes..its possible) as even at same vcore with higher speed, the temp is higher.. |
|
|
Aug 9 2011, 09:01 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(kuntawakaw @ Aug 9 2011, 08:29 PM) i did some test on the thermal last time. check here yo dato is safe for thuban running 1.5v for 24/7 ? from there.. there is no choice..if u want to overclock u must lower the vcore from stock. (yes..its possible) as even at same vcore with higher speed, the temp is higher.. kinda sayang lah..hahaha |
|
|
Aug 9 2011, 10:36 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
tired of finding sweet setting for my 945. can't stable even 3.4Ghz with all other at almost stock speed stock voltage... maybe my cheap mobo can't handle such geli2 OC. only 4+1 power phase.
now trying to having fun with lowering the voltage core. 1.27Vcore 231*13 = 3.0Ghz cpu. ram 1854Mhz CL9 1.55vdimm, cpu/nb 2317MHz 1.23Volt, 230*13 blend test for almost 1 hours. hopefully stable. read somewhere got people doing 1.19vcore at 3.0Ghz stable. update : passed 3 hours prime95 » Click to show Spoiler - click again to hide... « This post has been edited by lengchai86: Aug 10 2011, 02:20 AM |
|
|
Aug 10 2011, 02:08 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
|
|
|
Aug 10 2011, 02:33 AM
|
|
Junior Member
424 posts Joined: Jul 2011
|
QUOTE(saturn85 @ Aug 10 2011, 02:08 AM) yes i'm using it, but i dont know how to oc heheheAttached thumbnail(s) 
|
|
|
Aug 10 2011, 02:41 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(kuntawakaw @ Aug 9 2011, 08:29 PM) nice finding bro. QUOTE(Norazam @ Aug 10 2011, 02:33 AM) yes i'm using it, but i dont know how to oc hehehe wow, come, let sifu there poison you. share your spec first. |
|
|
Aug 10 2011, 02:48 AM
|
|
Junior Member
424 posts Joined: Jul 2011
|
QUOTE(saturn85 @ Aug 10 2011, 02:41 AM) nice finding bro. My spec : wow, come, let sifu there poison you. share your spec first. Amd Phenom II X6 1100t Asus CrossHair V Formula Kingston Hyper X 1600 8GB Sapphire 6950 x 2 Xfire Corsair Force3 120Gb SSD And Corsair Hydro Series H80 |
|
|
Aug 10 2011, 03:06 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
oredy reply you at post #249...btw i oso noob. don't know how to OC using software. thats why i OC by tweaking at bios.
This post has been edited by lengchai86: Aug 10 2011, 03:07 AM |
|
|
Aug 10 2011, 03:06 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(Norazam @ Aug 10 2011, 02:48 AM) My spec : wow, nice spec there. Amd Phenom II X6 1100t Asus CrossHair V Formula Kingston Hyper X 1600 8GB Sapphire 6950 x 2 Xfire Corsair Force3 120Gb SSD And Corsair Hydro Series H80  read guide first to let you have some idea: http://www.overclockers.com/forums/showthread.php?t=596023 |
|
|
Aug 10 2011, 08:59 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
What the tut, don't tell me 1090T phased out?
|
|
|
Aug 10 2011, 09:35 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lengchai86 @ Aug 10 2011, 03:06 AM) oredy reply you at post #249...btw i oso noob. don't know how to OC using software. thats why i OC by tweaking at bios. turbo-v is good for voltage fine tuning + quickie bench. for 24/7 setup, BIOS is d best. turbo-v by far is d best windows based voltage adjustment tool (for Asus AMD boards) imo, AOD is d closet rival but sadly it doesn't work on all boards. QUOTE(shinjite @ Aug 10 2011, 08:59 AM) What the tut, don't tell me 1090T phased out? should stock up ASAP bro, even in SLS not much shop have stocks liao... guess AMD is replacing 1090T with 1100T for sometimes liao... |
|
|
Aug 10 2011, 10:37 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Aug 10 2011, 09:35 AM) turbo-v is good for voltage fine tuning + quickie bench. for 24/7 setup, BIOS is d best. turbo-v by far is d best windows based voltage adjustment tool (for Asus AMD boards) imo, AOD is d closet rival but sadly it doesn't work on all boards. hermmm sound good to me should stock up ASAP bro, even in SLS not much shop have stocks liao... guess AMD is replacing 1090T with 1100T for sometimes liao... huhuhuhu |
|
|
Aug 10 2011, 10:51 AM
|
|
Junior Member
110 posts Joined: Jan 2011
|
thanks for the answer
|
|
|
Aug 10 2011, 10:58 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
there's some tricks involved in AI Suite II installation thou.... u need to install d patch which can be found on Asus Intel based mobo download page...
|
|
|
Aug 10 2011, 11:14 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
QUOTE(ah_khoo @ Aug 10 2011, 09:35 AM) should stock up ASAP bro, even in SLS not much shop have stocks liao... guess AMD is replacing 1090T with 1100T for sometimes liao... I think the 1055T is gonna phase out soon as well, the 1075T will take over it |
|
|
Aug 10 2011, 11:21 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 10 2011, 11:14 AM) I think the 1055T is gonna phase out soon as well, the 1075T will take over it yup, currently 1075t are priced too near to 1090t, so that could be d reason why ppl all rush for 1090t. 1100t still priced significantly higher than 1090t despite just a 100MHz bump from d latter. |
|
|
Aug 10 2011, 11:33 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Oh well.....can't do much if phase out.....
1075T is still okay |
|
|
Aug 10 2011, 11:36 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 10 2011, 11:33 AM) Oh well.....can't do much if phase out..... yeah... considerin if u need a decent cpu & ram @ 2k, 1075t aint that bad, w/ multi @ 15 max, one still can run 3750 cpu | 2700/3000 imc | 2k ram... very nice 24/7 setup... 1075T is still okay |
|
|
Aug 10 2011, 11:49 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I will try to get 4Ghz minimum
RAM and IMC have to slowly play Got my X6 1075T HDT75TFBK6DGR CCBBE CB 1103MPM This post has been edited by shinjite: Aug 10 2011, 11:51 AM |
|
|
Aug 10 2011, 12:28 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 10 2011, 11:49 AM) I will try to get 4Ghz minimum 4.0GHz mite a 'lil bit harsh on d pwm bro, even u'll be on water... unless u got a really good chip there which can do 4GHz w/ < 1.35v, most still need slightly more than 1.4v for such clock... RAM and IMC have to slowly play Got my X6 1075T HDT75TFBK6DGR CCBBE CB 1103MPM |
|
|
Aug 10 2011, 12:52 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I'll try my luck on it haha
The dream is 4Ghz 24/7 |
|
|
Aug 10 2011, 12:58 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
my dream 3.7 on deneb oredy kaput... cannot stable even 3.4Ghz with stock vcore...
|
|
|
Aug 10 2011, 01:53 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Aug 10 2011, 12:28 PM) 4.0GHz mite a 'lil bit harsh on d pwm bro, even u'll be on water... unless u got a really good chip there which can do 4GHz w/ < 1.35v, most still need slightly more than 1.4v for such clock... + headache with 990 chip.. lol i think amd preparing for bulldozer debut... sure there will be not much diff with phenom II thats y they changing plan in marketing... Added on August 10, 2011, 1:55 pm QUOTE(lengchai86 @ Aug 10 2011, 12:58 PM) my dream 3.7 on deneb oredy kaput... cannot stable even 3.4Ghz with stock vcore... never lost hope on amd bro... keep tryingThis post has been edited by fatalynx05: Aug 10 2011, 01:55 PM |
|
|
Aug 10 2011, 01:57 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 10 2011, 12:52 PM) I'll try my luck on it haha all d best bro... u'll never know until u put in on d torture chamber... The dream is 4Ghz 24/7 saw some 1075t did decently in xs, so u mite be one of those who are lucky enuf to get a good chip... QUOTE(lengchai86 @ Aug 10 2011, 12:58 PM) my dream 3.7 on deneb oredy kaput... cannot stable even 3.4Ghz with stock vcore... try to disable core by core, apart from mobo limitation (which i doubt so), sometimes weak core(s) can prevent one to hit certain clock w/ all cores activated. |
|
|
Aug 10 2011, 03:56 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
almost wanna sell the mobo bored of waitting damn bios update -.- kinda stuck at some setting
 |
|
|
Aug 10 2011, 04:00 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Aug 10 2011, 03:56 PM) almost wanna sell the mobo bored of waitting damn bios update -.- kinda stuck at some setting time to switch to MSI... we get bios update every fortnight or less... |
|
|
Aug 10 2011, 04:04 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Aug 10 2011, 04:00 PM) time to switch to MSI... we get bios update every fortnight or less... but the prob same loh imc n ram ... just new bios only huhuhu |
|
|
Aug 10 2011, 04:08 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(fatalynx05 @ Aug 10 2011, 04:04 PM) but the prob same loh imc n ram ... just new bios only huhuhu gd80 got 0 imc problem, saber got ah? both asus 990fx (be it saber or chv) have their fair share of shortcoming(s), gd80 dislikes hyper sticks while asus 990fx dislike psc sticks (in my situation). This post has been edited by ah_khoo: Aug 10 2011, 04:26 PM |
|
|
Aug 10 2011, 05:52 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(fatalynx05 @ Aug 10 2011, 01:53 PM) never lost hope on amd bro... i'm having fun with undervolt setting now. keep trying231*13=3.0Ghz, vcore 1.27V (stock 1.35V) cpu/nb 1.23V, nb freq 2.3Ghz ddr1854 CL9 1.55V HT link 2Ghz » Click to show Spoiler - click again to hide... « QUOTE(ah_khoo @ Aug 10 2011, 01:57 PM) try to disable core by core, apart from mobo limitation (which i doubt so), sometimes weak core(s) can prevent one to hit certain clock w/ all cores activated. wow can disable core by core? disable at bios or software - turboV?This post has been edited by lengchai86: Aug 10 2011, 05:54 PM |
|
|
Aug 10 2011, 06:04 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(lengchai86 @ Aug 10 2011, 05:52 PM) wow can disable core by core? disable at bios or software - turboV? bios... |
|
|
Aug 10 2011, 06:26 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(ah_khoo @ Aug 10 2011, 11:36 AM) yeah... considerin if u need a decent cpu & ram @ 2k, 1075t aint that bad, w/ multi @ 15 max, one still can run 3750 cpu | 2700/3000 imc | 2k ram... very nice 24/7 setup... this clock just nice. QUOTE(shinjite @ Aug 10 2011, 11:49 AM) I will try to get 4Ghz minimum x6 1090t already no stock?RAM and IMC have to slowly play Got my X6 1075T HDT75TFBK6DGR CCBBE CB 1103MPM only can get x6 1075t? less one thing to play with. |
|
|
Aug 10 2011, 06:52 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(ah_khoo @ Aug 10 2011, 04:08 PM) gd80 got 0 imc problem, saber got ah? both asus 990fx (be it saber or chv) have their fair share of shortcoming(s), gd80 dislikes hyper sticks while asus 990fx dislike psc sticks (in my situation). imc so far no my attempt stable for 3.1ghz but the ram lah stuck up at certain setting n clock only |
|
|
Aug 11 2011, 01:37 PM
|
Senior Member
1,239 posts Joined: Sep 2008
|
this is my 1st time oc cpu. please give some comment and suggestion.
[attachmentid=2380472] [attachmentid=2380473] |
|
|
Aug 11 2011, 05:21 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(xngjn @ Aug 11 2011, 01:37 PM) this is my 1st time oc cpu. please give some comment and suggestion. 1st time OC, then its very good OC result. » Click to show Spoiler - click again to hide... « oredy reach 3.99Ghz a.k.a 4.0Ghz which is very hard for my setup to achieve. 3.9 on Deneb is like a dream for OCer. only a few can do, else didn't even reach 3.6 like me This post has been edited by lengchai86: Aug 11 2011, 05:23 PM |
|
|
Aug 11 2011, 10:06 PM
|
|
Senior Member
1,239 posts Joined: Sep 2008
|
56c consider hot? im using hyper 212+ cooler.
what else i can oc? i feel my nb abit hot. how can i know the temp? |
|
|
Aug 11 2011, 10:26 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Just dont go above 65c can already
|
|
|
Aug 12 2011, 07:30 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(xngjn @ Aug 11 2011, 01:37 PM) this is my 1st time oc cpu. please give some comment and suggestion. nice clock bro, doing not bad. [attachmentid=2380472][attachmentid=2380473] i think the full load temperature just nice. what ram you have there? can try set dram voltage to 1.5v, i mean try to use minimum voltage see how. |
|
|
Aug 12 2011, 08:29 PM
|
|
Senior Member
1,239 posts Joined: Sep 2008
|
using Corsair PC1333 2GB X 2.
set dram voltage? is to set the voltage of ram? is oc-ing the ram? |
|
|
Aug 12 2011, 09:17 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(xngjn @ Aug 12 2011, 08:29 PM) using Corsair PC1333 2GB X 2. yes, set the voltage of the ram.set dram voltage? is to set the voltage of ram? is oc-ing the ram? 700mhz, consider overclock already. |
|
|
Aug 13 2011, 05:00 PM
|
|
Senior Member
1,239 posts Joined: Sep 2008
|
i already set dram voltage to 1.5v but nth change.
i saw come ppl nb frequency and dram frequency higher. how to make that? |
|
|
Aug 13 2011, 06:57 PM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
nothing will change if u set the voltage only..
nb freq: adjust multiplier or fsb ram: adjust ratio or fsb |
|
|
Aug 13 2011, 09:07 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(xngjn @ Aug 13 2011, 05:00 PM) i already set dram voltage to 1.5v but nth change. you can lower your cpu multiplier and increase the fsb. then the HT link and cpu/nb freq will increase. but remember to use lower HT link freq to make sure its not run above 2000Mhz. cpu/nb freq you can run higher freq but mybe need a slightly more voltage to stable. i saw come ppl nb frequency and dram frequency higher. how to make that? |
|
|
Aug 14 2011, 02:46 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(xngjn @ Aug 13 2011, 05:00 PM) i already set dram voltage to 1.5v but nth change. haha, nothing change is good.i saw come ppl nb frequency and dram frequency higher. how to make that? just use the minimum stable voltage. cpu nb and dram clock are tight to the htt reference clock. |
|
|
Aug 14 2011, 11:57 AM
|
Senior Member
1,008 posts Joined: Mar 2006 From: Kuantan Pahang
|
Water cooling is a nice thing.
Previous using cm 212, 3.85ghz already highest 58c. Now using modded h50. 4.05ghz only 53c max. Finally my 965be break 4ghz mark. Still tweaking vcore. Finally break 1.5vcore. Nice temp. This post has been edited by taxidoor: Aug 14 2011, 11:58 AM |
|
|
Aug 14 2011, 10:00 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(taxidoor @ Aug 14 2011, 11:57 AM) Water cooling is a nice thing. 53'c full load on 1.5v vcore. Previous using cm 212, 3.85ghz already highest 58c. Now using modded h50. 4.05ghz only 53c max. Finally my 965be break 4ghz mark. Still tweaking vcore. Finally break 1.5vcore. Nice temp. that is great. |
|
|
Aug 14 2011, 10:46 PM
|
|
Junior Member
231 posts Joined: May 2009
|
QUOTE(taxidoor @ Aug 14 2011, 11:57 AM) Water cooling is a nice thing. nice temp man Previous using cm 212, 3.85ghz already highest 58c. Now using modded h50. 4.05ghz only 53c max. Finally my 965be break 4ghz mark. Still tweaking vcore. Finally break 1.5vcore. Nice temp. |
|
|
Aug 15 2011, 08:56 AM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
QUOTE(xngjn @ Aug 11 2011, 02:37 PM) this is my 1st time oc cpu. please give some comment and suggestion. Good job my friend for your 4GHz. But frankly speaking it was an easy run for 4GHz @ C3 Deneb base. [attachmentid=2380472] [attachmentid=2380473] CL8 / 7 give u better performance. QUOTE(lengchai86 @ Aug 11 2011, 06:21 PM) 1st time OC, then its very good OC result. By increasing the multi to 19 and raise the FSB up to 210 is a basic thing dude. 4.2/4.3GHz on air is a dream for Ocer i can say. oredy reach 3.99Ghz a.k.a 4.0Ghz which is very hard for my setup to achieve. 3.9 on Deneb is like a dream for OCer. only a few can do, else didn't even reach 3.6 like me This post has been edited by verdict: Aug 15 2011, 09:02 AM |
|
|
Aug 15 2011, 10:53 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
WC does help but at d end of d day, chip itself matters d most. after diagnosed with hands of lemong (thx to u know who u are
), i realised that luck does play a part. sometimes u get decent chip while sometimes u got one which u can do nothing bout it, regardless how good is ya cooling solution. |
|
|
Aug 15 2011, 11:21 AM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
Did anyone know bout 990FX-UD7 from Gigabyte?
The mobo layout is awesome i can say. Solid with black PCB. Nose bleeding seeing this baby. Guys, may i know now who using 990 board? Brand + performance wise? This post has been edited by verdict: Aug 15 2011, 11:25 AM |
|
|
Aug 15 2011, 12:01 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
990FX-UD7 also 4+1 phase?
Checked, it has 8+2 phase This post has been edited by shinjite: Aug 15 2011, 12:10 PM |
|
|
Aug 15 2011, 12:20 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(verdict @ Aug 15 2011, 11:21 AM) Did anyone know bout 990FX-UD7 from Gigabyte? yes, d matte black pcb (like some asus gfx eg my ex 5770 cucore) is sexy, but d 990fx ud series has been bugged by vdroop issue, someone in xs even did a hardmod to fix that issue. not sayin that they aren't good as i believe all boards have their fair share of pros & cons, it depends on how a person can tolerate d con(s). The mobo layout is awesome i can say. Solid with black PCB. Nose bleeding seeing this baby. Guys, may i know now who using 990 board? Brand + performance wise? like what u knew, i've tested gd80 & chv. both are decent but i found both are a 'lil bit picky on ram. gd80 prefer psc sticks to go > 2k while chv is d other way round, elpida sticks worked fine @ 2k & above on d latter. could be user problem thou... similarity on both is imc oc is gooding, 3k imc was a breeze (w/ decent volt), but no luck for higher freq on p95. homeworks not yet finished on both... my personal pick would be asus m5a99x evo, very2 oc friendly board, only let down is fewer layer pcb & lesser phase in pwm. QUOTE(shinjite @ Aug 15 2011, 12:01 PM) 990FX-UD7 also 4+1 phase? they're 8+2 pwm bro... This post has been edited by ah_khoo: Aug 15 2011, 12:21 PM |
|
|
Aug 15 2011, 03:31 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(verdict @ Aug 15 2011, 08:56 AM) Good job my friend for your 4GHz. But frankly speaking it was an easy run for 4GHz @ C3 Deneb base. mine oso C3 but not BE one..very hard to stable even at 3.5Ghz, perhaps my mobo can't handle it...btw mine is 945 C3. now only enjoying undervolt setting, OC the ram speed and cpu/nb but cpu at stock clock (use lower multiplier) CL8 / 7 give u better performance. :nod:By increasing the multi to 19 and raise the FSB up to 210 is a basic thing dude. 4.2/4.3GHz on air is a dream for Ocer i can say. QUOTE(verdict @ Aug 15 2011, 11:21 AM) Did anyone know bout 990FX-UD7 from Gigabyte? wah oredy UD7? i only saw UD3 and UD5 at lyp pricelist yesterday...UD5 one RM659.The mobo layout is awesome i can say. Solid with black PCB. Nose bleeding seeing this baby. Guys, may i know now who using 990 board? Brand + performance wise? This post has been edited by lengchai86: Aug 15 2011, 03:39 PM |
|
|
Aug 15 2011, 04:26 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Damn, after reading on the MOSFETs failures on the MSI 790FX-GD70 thanks to the x6 procs
Now I thinking twice already Maybe I go get straight a 890FX/990FX with VRM 8+2 phase >_<" |
|
|
Aug 15 2011, 04:48 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 15 2011, 04:26 PM) Damn, after reading on the MOSFETs failures on the MSI 790FX-GD70 thanks to the x6 procs if u can find one cheap asus m4a88td-v /usb3 evo board, by all mean go for it bro... fantastic mid range board, 2.15GHz on ram, 3k nb, decent chip mileage... d best asus board i owned so far... Now I thinking twice already Maybe I go get straight a 890FX/990FX with VRM 8+2 phase >_<" |
|
|
Aug 15 2011, 05:04 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
That mobo should be around the RM3xx price range right?
|
|
|
Aug 15 2011, 05:12 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 15 2011, 05:04 PM) That mobo should be around the RM3xx price range right? not so sure bout d price in lyn bro... but make sure u don't get d lousier version (M4A88T-V /USB3 iirc) which uses sb750, insist on sb850 one in M4A88TD-V /USB3 EVO... won't regret for sure... |
|
|
Aug 15 2011, 05:13 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
OK, thanks bro, damn, I need to faster sell off my 790FX, damn scary
Read one topic at overclockers forum, stock 1075T also mobo died >_>" |
|
|
Aug 15 2011, 05:18 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Aug 15 2011, 05:13 PM) OK, thanks bro, damn, I need to faster sell off my 790FX, damn scary np bro... best of luck... Read one topic at overclockers forum, stock 1075T also mobo died >_>" apart from mostfet issue, gd70 is still a decent board (or i can say one of d best 790fx boards around). |
|
|
Aug 15 2011, 05:54 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Thats why....I still thinking hard now
|
|
|
Aug 15 2011, 06:59 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(shinjite @ Aug 15 2011, 05:54 PM) Thats why....I still thinking hard now how much u wanna sell bro? Added on August 15, 2011, 7:00 pm QUOTE(verdict @ Aug 15 2011, 11:21 AM) Did anyone know bout 990FX-UD7 from Gigabyte? ah khoo got all 990 mobo... The mobo layout is awesome i can say. Solid with black PCB. Nose bleeding seeing this baby. Guys, may i know now who using 990 board? Brand + performance wise? This post has been edited by fatalynx05: Aug 15 2011, 07:00 PM |
|
|
Aug 15 2011, 08:27 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(shinjite @ Aug 15 2011, 05:04 PM) That mobo should be around the RM3xx price range right? m4a88td evo rm400m4a88t-v evo usb3 rm350 m5a88v evo rm425 price from jayacom |
|
|
Aug 15 2011, 09:41 PM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 15 2011, 08:27 PM) m4a88td evo rm400 u should ask bro khoo about this mobo...coz he got experience last time with it m4a88t-v evo usb3 rm350 m5a88v evo rm425 price from jayacom |
|
|
Aug 15 2011, 10:29 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(fatalynx05 @ Aug 15 2011, 09:41 PM) u should ask bro khoo about this mobo...coz he got experience last time with it i can't find M4A88TD-V /USB3 EVO price... for now i only owned m4a87td usb3. cheap mobo only |
|
|
Aug 16 2011, 01:05 AM
|
|
Senior Member
667 posts Joined: Jan 2005 From: Johor Bahru
|
QUOTE(lengchai86 @ Aug 15 2011, 10:29 PM) i can't find M4A88TD-V /USB3 EVO price... for now i only owned m4a87td usb3. cheap mobo only for usb3 rm305 n for evo rm 400 (jayacom) |
|
|
Aug 17 2011, 02:45 AM
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
QUOTE(lengchai86 @ Aug 15 2011, 10:29 PM) i can't find M4A88TD-V /USB3 EVO price... for now i only owned m4a87td usb3. cheap mobo only cheap mobo can log in windows faster what? same mobo as mine... lol |
|
|
Aug 17 2011, 05:14 AM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(cyberloner @ Aug 17 2011, 02:45 AM) cheap mobo can log in windows faster what? same mobo as mine... lol of coz you faster one ma, you using PII 1090T sure faster, + OC 3.7GHz . i remember back when using crucial ram + amd athlon X2 + abit ax78 is faster than my current setup...faster loading into windows |
|
|
Aug 17 2011, 11:30 AM
|
 
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
Wow...Everything different now...imc more than 3k, gd70 killed by 6 cores, sb750 now lousy...
Dangg i miss playing with AMD n this thread.... |
|
|
Aug 17 2011, 11:50 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(antonio @ Aug 17 2011, 11:30 AM) Wow...Everything different now...imc more than 3k, gd70 killed by 6 cores, sb750 now lousy... intel is d powderfullest sir... Dangg i miss playing with AMD n this thread.... d thread miss u too... any chance of moving back to AMD? |
|
|
Aug 17 2011, 12:26 PM
|
|
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
QUOTE(ah_khoo @ Aug 17 2011, 11:50 AM) intel is d powderfullest sir... unless i marry a royal princess, probably not...its marriage 'season' now d thread miss u too... any chance of moving back to AMD? by the way Crosshair4 no one play?? |
|
|
Aug 17 2011, 12:40 PM
|
|
Senior Member
3,812 posts Joined: Dec 2008 From: Eden
|
QUOTE(antonio @ Aug 17 2011, 12:26 PM) unless i marry a royal princess, probably not...its marriage 'season' now antonio got the inhell powah straight forgot amd liao~ by the way Crosshair4 no one play?? |
|
|
Aug 18 2011, 09:55 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(antonio @ Aug 17 2011, 12:26 PM) unless i marry a royal princess, probably not...its marriage 'season' now Got, sarahlah still using it i think, last time saw quite a number of users of the CHIV nowadays dwindle a bit.. by the way Crosshair4 no one play?? QUOTE(uzer85 @ Aug 17 2011, 12:40 PM) antonio got the inhell powah straight forgot amd liao~ He like fast & furious maa, amd is kinda not so fast & too furious, bwahahahaha |
|
|
Aug 18 2011, 11:08 AM
|
Junior Member
26 posts Joined: Jan 2011 From: Kuantan
|
still got my amd with civf system...
running with 500khz cpu pwm freq...so far never give me prob. |
|
|
Aug 19 2011, 12:45 PM
|
Junior Member
194 posts Joined: Jun 2008 From: 127.0.0.1
|
dem.. i miss OCing...
my record is still at the 1st post |
|
|
Aug 21 2011, 12:45 PM
|
|
Senior Member
3,706 posts Joined: Jul 2011 From: Taiping
|
QUOTE(antonio @ Aug 17 2011, 12:26 PM) unless i marry a royal princess, probably not...its marriage 'season' now i have crosshair4.......but i don't use.................because to search new casing to fit my crosshair4....... by the way Crosshair4 no one play?? |
|
|
Aug 21 2011, 07:16 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
QUOTE(primaroti @ Aug 21 2011, 12:45 PM) i have crosshair4.......but i don't use.................because to search new casing to fit my crosshair4....... then whats your current mobo. wah you so rich bought that mobo than just keep in the box. later the price oredy fall then you just start use. waste money lor...better lend to me lor then can OC my 945 deneb This post has been edited by lengchai86: Aug 21 2011, 07:17 PM |
|
|
Aug 29 2011, 10:19 PM
|
Junior Member
413 posts Joined: Dec 2010
|
i try oc with a switch on mobo to 20% cpu oc.. but failure.. did i need to change any setting..
|
|
|
Aug 29 2011, 10:26 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(intel2010 @ Aug 29 2011, 10:19 PM) i try oc with a switch on mobo to 20% cpu oc.. but failure.. did i need to change any setting.. u flip the switch, it will increase the HTTtake note that HTT will increase ur core speed, ram speed, nb frequency, and also HT Link. as u have a BE processor, just manually increase the multiplier.. and add some vcore.. auto oc always not recommended here |
|
|
Aug 31 2011, 12:47 AM
|
|
Junior Member
413 posts Joined: Dec 2010
|
QUOTE(kuntawakaw @ Aug 29 2011, 10:26 PM) u flip the switch, it will increase the HTT i have zero oc skill.. what is the maltiplier, how many to add vcore,, what this means u flip the switch, it will increase the HTTtake note that HTT will increase ur core speed, ram speed, nb frequency, and also HT Link. as u have a BE processor, just manually increase the multiplier.. and add some vcore.. auto oc always not recommended here .. sory not very good in english bro... |
|
|
Aug 31 2011, 01:01 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(intel2010 @ Aug 31 2011, 12:47 AM) i have zero oc skill.. what is the maltiplier, how many to add vcore,, what this means u flip the switch, it will increase the HTT i cant explain to u anything.. so u try for oc guides on first page or just leave ur system at stock. .. sory not very good in english bro... those terms i mentioned all is basic.. u donno, u cant oc. thats all |
|
|
Aug 31 2011, 03:52 AM
|
Senior Member
1,357 posts Joined: Jan 2003 From: Bukit Jelutong, Shah Alam
|
Overclocking is nott recomended for beginners
This post has been edited by tesla_rage: Aug 31 2011, 03:56 AM |
|
|
Aug 31 2011, 03:58 AM
|
|
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
Overclocking is bad for the components and will void your warranty...Unless you have spare cash to spend on another motherboard, another set of rams, a new processor just in case you fry ur current one, i suggest you dont overclock your PC....
Not only overclocking is dangerous, it also might cause other components such as hardisk or graphic card to be damaged.. Overclocking is like motoracing..U need tools and knowledge to run a race car..A race car is dangerous on the road but not on the track, just as road cars arent supposed to be driven like a racecar.. components on a race car is far more expensive compared to a road car and the same can be said for overclocking.. Do you have high quality hardware such as a good power supply, monitoring tools or even cooling? |
|
|
Sep 1 2011, 12:23 AM
|
|
Junior Member
413 posts Joined: Dec 2010
|
QUOTE(antonio @ Aug 31 2011, 03:58 AM) Overclocking is bad for the components and will void your warranty...Unless you have spare cash to spend on another motherboard, another set of rams, a new processor just in case you fry ur current one, i suggest you dont overclock your PC.... i dont want to da a crazy oc,, just a simple oc.. like people said.. slow2 learning to oc.. i dont know my system is good or not. can you verify my siggy.. is my hardware is good enough..Not only overclocking is dangerous, it also might cause other components such as hardisk or graphic card to be damaged.. Overclocking is like motoracing..U need tools and knowledge to run a race car..A race car is dangerous on the road but not on the track, just as road cars arent supposed to be driven like a racecar.. components on a race car is far more expensive compared to a road car and the same can be said for overclocking.. Do you have high quality hardware such as a good power supply, monitoring tools or even cooling? |
|
|
Sep 1 2011, 10:23 AM
|
|
VIP
4,032 posts Joined: Jan 2003 From: MSR Headquaters
|
QUOTE(intel2010 @ Sep 1 2011, 12:23 AM) i dont want to da a crazy oc,, just a simple oc.. like people said.. slow2 learning to oc.. i dont know my system is good or not. can you verify my siggy.. is my hardware is good enough.. Ur board: 870-G45 is not the most recommended board OC...it lacks most OC boards hardware, it even does have sinks for the VRM area...and for starters, thats not a good thing...The only thing u can do, is raise the multiplier on the x2 550 BE...ada upto 0.2v to help stabilize...if u already reach 1.45v for the CPU, then better play safe since you will need better cooling to cool the processor.. This post has been edited by antonio: Sep 1 2011, 10:25 AM |
|
|
Sep 2 2011, 10:21 AM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
QUOTE(antonio @ Aug 31 2011, 04:58 AM) Overclocking is bad for the components and will void your warranty...Unless you have spare cash to spend on another motherboard, another set of rams, a new processor just in case you fry ur current one, i suggest you dont overclock your PC.... So details sir, hail to antonio bro. Not only overclocking is dangerous, it also might cause other components such as hardisk or graphic card to be damaged.. Overclocking is like motoracing..U need tools and knowledge to run a race car..A race car is dangerous on the road but not on the track, just as road cars arent supposed to be driven like a racecar.. components on a race car is far more expensive compared to a road car and the same can be said for overclocking.. Do you have high quality hardware such as a good power supply, monitoring tools or even cooling? Happy Raya antonio~  |
|
|
Sep 3 2011, 05:09 PM
|
Senior Member
872 posts Joined: Jun 2007 From: Kuala Lumpur(juz my body,LOl)
|
ive lost my oc setting after bad company 2 hang n hv to reset...a good time to re set the wc setup
|
|
|
Sep 4 2011, 10:25 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
havin fun w/ d gd80...
|
|
|
Sep 4 2011, 05:24 PM
|
|
Senior Member
872 posts Joined: Jun 2007 From: Kuala Lumpur(juz my body,LOl)
|
http://www.bit-tech.net/news/hardware/2011...the-next-week/1
is this old news? "Zambezi will use Globalfoundries’ 32nm SoI (silicon on Insulator) manufacturing process, which is no surprise, and each die is said to measure a hefty 315mm2. Server and workstation versions of Bulldozer CPUs should ship in September." |
|
|
Sep 8 2011, 03:42 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
AMD Cancels Next-Gen Komodo Processor, Corona Platform in Favour of New Chips
good news? QUOTE Not a lot is known about AMD's code-named Vishera chips, which are projected to succeed AMD FX "Zambezi" processors next year. People with knowledge of the matter indicated that the CPUs sport up to eight Piledriver (next-generation Bulldozer) x86 cores, dual-channel DDR3 memory controller and are compatible with AM3+ infrastructure as well as Scorpius platform featuring AMD 990FX core-logic sets. |
|
|
Sep 9 2011, 12:20 PM
|
Junior Member
434 posts Joined: Jul 2010 From: ^Newbie^
|
Not forgetting LYN
AMD FX-8120 Stock clock 3.1Ghz Turbo 3.4Ghz  |
|
|
Sep 9 2011, 09:31 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
msi do produce feel good ram clocking 900 series board...
|
|
|
Sep 9 2011, 11:04 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(louislkw @ Sep 9 2011, 12:20 PM) Not forgetting LYN you got bulldozer already? AMD FX-8120 Stock clock 3.1Ghz Turbo 3.4Ghz |
|
|
Sep 10 2011, 12:16 AM
|
Senior Member
1,222 posts Joined: Jan 2003 From: Melaka
|
QUOTE(ah_khoo @ Sep 9 2011, 09:31 PM) msi do produce feel good ram clocking 900 series board... pergh! ram berapa ringgit?
|
|
|
Sep 10 2011, 12:26 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(^KamilskaZ^ @ Sep 10 2011, 12:16 AM) pergh! ram berapa ringgit? it's just a pair of mid range ram bro, ocz xte plat 2000 cl9. price wise it's less than rm400 for a brand new pair, very limited thou coz so far i never see anyone own it. corsair dom gt rev 7.1 (psc chip) should be able to do better. ofcoz, specially binned (for amd) gskill flare would be d most ideal choice... This post has been edited by ah_khoo: Sep 10 2011, 12:27 AM |
|
|
Sep 13 2011, 09:03 PM
|
|
Senior Member
872 posts Joined: Jun 2007 From: Kuala Lumpur(juz my body,LOl)
|
AMD Bulldozer Breaks CPU Frequency World Record
didnt read till the end...TLDR 2 cores 2 thread...mmm,may be i missed something,need to read again about this 8-core thingy This post has been edited by shajack: Sep 13 2011, 09:06 PM |
|
|
Sep 13 2011, 09:20 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
enjoy~ |
|
|
Sep 13 2011, 10:24 PM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
Only one core was enabled when oc to 8GHz, result would be different if all 4 modules, 8 cores were enabled.
^ got this info from XS. |
|
|
Sep 13 2011, 10:51 PM
|
|
Senior Member
3,333 posts Joined: Dec 2009
|
QUOTE(1024kbps @ Sep 13 2011, 10:24 PM) Only one core was enabled when oc to 8GHz, result would be different if all 4 modules, 8 cores were enabled. I heard it was one module.^ got this info from XS.  |
|
|
Sep 13 2011, 11:03 PM
|
Elite
4,619 posts Joined: Jul 2011
|
1 core with 8GHZ++ ?? what the hell man, I can do hell lot of extensive things with it. lol
|
|
|
Sep 13 2011, 11:07 PM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
QUOTE(dma0991 @ Sep 13 2011, 10:51 PM) I heard it was one module. Yeah typo in my post » Click to show Spoiler - click again to hide... « Anyway that would more awesome if the RAM timing is correct on the cpuz screenshot |
|
|
Sep 13 2011, 11:34 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
i'd like to see 2500MHz @ CAS7 prime stable usin healthy vdimm like 1.65v... decent cpu clock > checked, now left with slightly improved ipc & feel good ram oc... pls keep surprise me AMD...
This post has been edited by ah_khoo: Sep 13 2011, 11:35 PM |
|
|
Sep 17 2011, 09:42 PM
|
Senior Member
1,347 posts Joined: Jan 2003
|
sorry to interrupt guys..but need some input...
1055t@4ghz vcore 1.42v..prime stable...cpu/nb volatge abt 1.325v(2.8ghz) need to know what you guys prime temp are..and using what cooler.. just want to know what is the temp like at that speed n vcore |
|
|
Sep 17 2011, 10:53 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(CV6149 @ Sep 17 2011, 09:42 PM) sorry to interrupt guys..but need some input... u missed out one thing bro, mobo. sometimes, diff mobo gives diff readin... for that kinda clock, a decent cooler like ven -x should gives lower 50's Celcius in a case with good airflow. my humble 2 cents... 1055t@4ghz vcore 1.42v..prime stable...cpu/nb volatge abt 1.325v(2.8ghz) need to know what you guys prime temp are..and using what cooler.. just want to know what is the temp like at that speed n vcore |
|
|
Sep 17 2011, 11:47 PM
|
|
Senior Member
1,347 posts Joined: Jan 2003
|
my mobo is asus m4a88td..
Lower 50 during prime?? ...emm well need to revise my water setuplah..i got about 50-53...always thought something amiss with my setup... |
|
|
Sep 18 2011, 11:04 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(CV6149 @ Sep 17 2011, 11:47 PM) my mobo is asus m4a88td.. lower 50s means 50~55'c bro... but yeah, i'd expect wc to do slight better since that (lower 50s) was done usin decent air coolin (TRUE black @ push pull). here's mine attempt @ 4GHz w/ 1.44v on CHV:Lower 50 during prime?? ...emm well need to revise my water setuplah..i got about 50-53...always thought something amiss with my setup... http://forum.lowyat.net/index.php?act=Atta...post&id=2412391 |
|
|
Sep 18 2011, 12:28 PM
|
|
Senior Member
1,347 posts Joined: Jan 2003
|
yes bro..i expect wc shud be better also..
but maybe its my setup..will check it again..beside all using cheap2 used stuff lol...apogee GT wb only.. |
|
|
Sep 18 2011, 07:27 PM
|
|
Senior Member
872 posts Joined: Jun 2007 From: Kuala Lumpur(juz my body,LOl)
|
hey guys...help me some...got this mushkin on 7-9-7-24,1600,1.65v which is default...cant boot if timing change to 8-8-8-24,same speed n voltage...any thought?else is default.
rite now memtest with 8-9-8-24 1600 1.51v,no error yet. much appreciated |
|
|
Sep 18 2011, 08:24 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shajack @ Sep 18 2011, 07:27 PM) hey guys...help me some...got this mushkin on 7-9-7-24,1600,1.65v which is default...cant boot if timing change to 8-8-8-24,same speed n voltage...any thought?else is default. what's ya mobo & chip? can give ss with cpu tweaker to show subtimings as well? rite now memtest with 8-9-8-24 1600 1.51v,no error yet. much appreciated |
|
|
Sep 18 2011, 11:08 PM
|
|
Senior Member
872 posts Joined: Jun 2007 From: Kuala Lumpur(juz my body,LOl)
|
argh Liverpool
 memtest no error,prime95 blend 2hours no error(not long enuf i guess) but firefox crashed n my pc froze with these setting 8-9-8-24 1600 1.51v(not default voltage) after stopping prime95 |
|
|
Sep 18 2011, 11:36 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
i suggest you try custom blend test
fft length 640 - 4096 time 1 or 2 minute |
|
|
Sep 21 2011, 02:13 PM
|
|
Senior Member
2,458 posts Joined: Apr 2008 From: M A N C A V E
|
QUOTE(shajack @ Sep 19 2011, 12:08 AM) argh Liverpool Try to lossen up the timming, tras to 26-27 and trtp to 7. Plus adding extra voltage to dimm like 1.65V. memtest no error,prime95 blend 2hours no error(not long enuf i guess) but firefox crashed n my pc froze with these setting 8-9-8-24 1600 1.51v(not default voltage) after stopping prime95 From there try to lowering down the voltages, one by one. Gigabyte 890FX is a good mobo to play with. Their memory controller also not bad at all. This post has been edited by verdict: Sep 21 2011, 02:39 PM |
|
|
Sep 21 2011, 05:16 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Guys me selling off my MSI 790FX-GD70 due to need of cash
But no worries, will get myself a 990FX mobo in the future, which one is recommended? |
|
|
Sep 21 2011, 06:35 PM
|
|
Senior Member
872 posts Joined: Jun 2007 From: Kuala Lumpur(juz my body,LOl)
|
QUOTE(verdict @ Sep 21 2011, 03:13 PM) Try to lossen up the timming, tras to 26-27 and trtp to 7. Plus adding extra voltage to dimm like 1.65V. thanks,wll certainly try that From there try to lowering down the voltages, one by one. Gigabyte 890FX is a good mobo to play with. Their memory controller also not bad at all. Added on September 21, 2011, 6:37 pm QUOTE(shinjite @ Sep 21 2011, 06:16 PM) Guys me selling off my MSI 790FX-GD70 due to need of cash sabertooth...all rounder from what i read...if i have the money,i wont pick gigabyte by just looking at the mobo But no worries, will get myself a 990FX mobo in the future, which one is recommended? This post has been edited by shajack: Sep 21 2011, 06:37 PM |
|
|
Sep 21 2011, 07:48 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Sabertooth is kinda pricey
So far Gigabyte 990FXA-UD5 and MSI 990FX-GD80 around the <RM650 range |
|
|
Sep 21 2011, 10:39 PM
|
|
Junior Member
231 posts Joined: May 2009
|
I would go for MSI 990FX-GD80...gigabyte seems to have problem regarding vdrop..
|
|
|
Sep 23 2011, 12:44 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(haziqk10 @ Sep 21 2011, 10:39 PM) I would go for MSI 990FX-GD80...gigabyte seems to have problem regarding vdrop.. yup, a quick read (i mite be wrong) shows some of their 990fx-ud series have be plagued by vdrop issue. as for GD80, can't say it did superbly well on cpu (since all my chip lately are just an average chip), but i can assure u d ram clockin is pretty decent... |
|
|
Sep 27 2011, 03:57 AM
|
Senior Member
1,392 posts Joined: Aug 2006 From: Sungai Petani
|
Sifus,
Not sure if this is the right thread to ask but if not do let me know where I can ask. So, I overclocked my Athlon II X4 635 from the stock 2.9GHz to what it seems like a stable 3.47GHz just by leaving auto voltage and increasing the FSB to 240MHz. I use CM TX3 for the cooler. My question, is this the best stable overclock for daily use that I can get from my processor? what should I do next? Can I just use my PC normally? or is there something I need to do to make sure the system is truly stable? This post has been edited by nyunyu: Sep 27 2011, 03:58 AM |
|
|
Sep 27 2011, 08:55 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(nyunyu @ Sep 27 2011, 03:57 AM) Sifus, 1) You shouldnt leave voltage in autoNot sure if this is the right thread to ask but if not do let me know where I can ask. So, I overclocked my Athlon II X4 635 from the stock 2.9GHz to what it seems like a stable 3.47GHz just by leaving auto voltage and increasing the FSB to 240MHz. I use CM TX3 for the cooler. My question, is this the best stable overclock for daily use that I can get from my processor? what should I do next? Can I just use my PC normally? or is there something I need to do to make sure the system is truly stable? 2) to know whether it is stable or not you need to stress it (i.e. using Prime95) 3) I wouldnt recommend TX3 to anyone at all, to me is at least a hyper212+ 4) one system cannot be truly "100%", you may prime all you want and get no errors but crashes may still occur depending on how you are using your PC (still depend how how do you define "stable") 5) Increasing FSB will also increase the ram speed, do watch that |
|
|
Sep 27 2011, 11:12 PM
|
|
Elite
4,619 posts Joined: Jul 2011
|
http://forum.lowyat.net/index.php?act=Atta...post&id=2452263
Can anyone tell me where the speedfan reading is normal or not? Its 69 celcius and its quite hot but got people say ok and some other people say not ok. I want to rectify this problem first before I further overclock this proc because I don't want my mobo to burn =.= |
|
|
Sep 27 2011, 11:31 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
use hwmonitor to confirm? coretemp is showing 47C
|
|
|
Sep 27 2011, 11:31 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
^i'd take 47'c as cpu temp, 6x'C as nb temp. i doubt b3 chip can be as hot, what cooler ur usin btw? any temp above 60'c is considered high to me. u have temp monitorin software from d board manufacturer? try that & hw monitor to compare w/ speedfan.
|
|
|
Sep 27 2011, 11:36 PM
|
Senior Member
782 posts Joined: Oct 2009
|
QUOTE(shinjite @ Sep 21 2011, 05:16 PM) Guys me selling off my MSI 790FX-GD70 due to need of cash go for crosshair v formula.. But no worries, will get myself a 990FX mobo in the future, which one is recommended? |
|
|
Sep 27 2011, 11:57 PM
|
|
Elite
4,619 posts Joined: Jul 2011
|
QUOTE(dafreak @ Sep 27 2011, 11:31 PM) use hwmonitor to confirm? coretemp is showing 47C QUOTE(ah_khoo @ Sep 27 2011, 11:31 PM) ^i'd take 47'c as cpu temp, 6x'C as nb temp. i doubt b3 chip can be as hot, what cooler ur usin btw? any temp above 60'c is considered high to me. u have temp monitorin software from d board manufacturer? try that & hw monitor to compare w/ speedfan. Its a stock cooler btw. I don't have it so I'll attach two screenshots(one is before stressing and the other one after stressing)Before stressing(idle): 
After stress for 10min: 
|
|
|
Sep 28 2011, 12:08 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(wcypierre @ Sep 27 2011, 11:57 PM) Its a stock cooler btw. I don't have it so I'll attach two screenshots(one is before stressing and the other one after stressing) my take is tmpin0 = cpu temp (not core temp), tmpin01 = chipset, iirc, tmpin02 on some gigabyte board is a 'lil screwed which can be neglected. Before stressing(idle):
After stress for 10min:
this was my attempt back then when i was on x4 9550 & ax78... http://static.lowyat.net/uploads/attach-21...-1218558193.jpg |
|
|
Sep 28 2011, 12:19 AM
|
|
Elite
4,619 posts Joined: Jul 2011
|
So its okay? btw, your screenshot is under full load or idle?
|
|
|
Sep 28 2011, 12:27 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(wcypierre @ Sep 28 2011, 12:19 AM) So its okay? btw, your screenshot is under full load or idle? if tmpin1 is indeed nb temp, it's slightly on d high side to me. d ss was captured @ ~92% load usin occt... |
|
|
Sep 28 2011, 12:32 AM
|
|
Elite
4,619 posts Joined: Jul 2011
|
QUOTE(ah_khoo @ Sep 28 2011, 12:27 AM) if tmpin1 is indeed nb temp, it's slightly on d high side to me. d ss was captured @ ~92% load usin occt... I felt that as well. I'll try to clean the dust and see whether it'll drop or not. Even under ac condition the temperature won't drop at all Added on September 28, 2011, 12:35 ambtw, I have the same problem as shajack as well, my Firefox keeps crashing This post has been edited by wcypierre: Sep 28 2011, 12:35 AM |
|
|
Sep 28 2011, 12:41 AM
|
|
Senior Member
916 posts Joined: Dec 2008 From: nippon
|
 running in 3.9Ghz now very stable and good temp cant w8 when buldozer out gonna get AMD x6 BE |
|
|
Sep 28 2011, 05:56 AM
|
|
Senior Member
1,392 posts Joined: Aug 2006 From: Sungai Petani
|
QUOTE(dafreak @ Sep 27 2011, 08:55 AM) 1) You shouldnt leave voltage in auto I overclocked mine based on the review from tom's hardware site. They got stable oc with auto voltage.2) to know whether it is stable or not you need to stress it (i.e. using Prime95) 3) I wouldnt recommend TX3 to anyone at all, to me is at least a hyper212+ 4) one system cannot be truly "100%", you may prime all you want and get no errors but crashes may still occur depending on how you are using your PC (still depend how how do you define "stable") 5) Increasing FSB will also increase the ram speed, do watch that I tried adjusting voltage but haven't found a stable one yet. Now I decreasing it a little bit as after I ran prime95, I got bsod. Now everything is good, even can play the witcher 2 now Will keep an eye on this. See if it is stable enough to be used daily. Anyone here using the same proc and oc care to share? Just for my reference. |
|
|
Oct 6 2011, 03:52 PM
|
Junior Member
345 posts Joined: Jun 2009
|
how long stable stress test prime 95
|
|
|
Oct 6 2011, 09:48 PM
|
|
Senior Member
6,009 posts Joined: Feb 2007
|
1 Hours is "standard" length?
imho prime95 for me only can test the NB clock overclocking stability, the more stressfull app you can try this one: http://www.gromacs.org/@api/deki/files/43/=stresscpu2.tgz < Need 7z to extract. RAM oc stability need memtest or prolly y-chruncher http://www.numberworld.org/y-cruncher/ OR next mobo you could consider Asus EVO series, eg M5A99X or higher end one, Was using Asus OC utility to OC my system, result was pretty good but voltage is abit higher than my old mobo |
|
|
Oct 7 2011, 09:37 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(1024kbps @ Oct 6 2011, 09:48 PM) 1 Hours is "standard" length? woot... nice hoot bro, m5a99x evo is one of d ram friendliest board around... AI Suite II is simply d best oc tool for Asus AMD boards, nothing beat that for sure... imho prime95 for me only can test the NB clock overclocking stability, the more stressfull app you can try this one: http://www.gromacs.org/@api/deki/files/43/=stresscpu2.tgz < Need 7z to extract. RAM oc stability need memtest or prolly y-chruncher http://www.numberworld.org/y-cruncher/ OR next mobo you could consider Asus EVO series, eg M5A99X or higher end one, Was using Asus OC utility to OC my system, result was pretty good but voltage is abit higher than my old mobo |
|
|
Oct 8 2011, 03:14 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
sold 1090T change mobo to M5A97 with 555BE ... cannot unlock... but OC to 4ghz... LOL
waiting bulldozer This post has been edited by cyberloner: Oct 8 2011, 03:18 AM |
|
|
Oct 11 2011, 07:50 AM
|
Senior Member
1,065 posts Joined: Jan 2003 From: Born in Kedah, Now @Putrajaya
|
Bulldozer pre order from cex now..
Rm499.00 for FX 4100.. USD 120.68 what price if arrived @malaysian? |
|
|
Oct 11 2011, 09:58 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(momuchi @ Oct 11 2011, 07:50 AM) Bulldozer pre order from cex now.. direct conversion usin yahoo currency converter is ~RM374. Rm499.00 for FX 4100.. USD 120.68 what price if arrived @malaysian? http://finance.yahoo.com/currency-converte...;to=MYR;amt=120 |
|
|
Oct 11 2011, 11:28 AM
|
|
Senior Member
1,065 posts Joined: Jan 2003 From: Born in Kedah, Now @Putrajaya
|
QUOTE(ah_khoo @ Oct 11 2011, 09:58 AM) direct conversion usin yahoo currency converter is ~RM374. need waiting it arrived at all stored.. http://finance.yahoo.com/currency-converte...;to=MYR;amt=120 |
|
|
Oct 11 2011, 11:51 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
demmmmm... 1 more day to go for BD...
|
|
|
Oct 11 2011, 11:54 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
thou it's unlikely, but i still hope for a small surprise... B.E.L.I.E.V.E i must...
|
|
|
Oct 11 2011, 04:24 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
So far the reviews of the FX-8150 is dissapointing
5Ghz OC SuperPI 1MB around 17 seconds D: |
|
|
Oct 11 2011, 11:16 PM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
waiting~~~
|
|
|
Oct 12 2011, 01:16 AM
|
|
Senior Member
916 posts Joined: Dec 2008 From: nippon
|
i guess 890fx cant support BD
|
|
|
Oct 12 2011, 03:17 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
|
|
|
Oct 12 2011, 09:24 AM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
cant wait for some results on FX! fast fast bench it
|
|
|
Oct 12 2011, 10:31 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(kintsuchi @ Oct 12 2011, 01:16 AM) i guess 890fx cant support BD Eh? I thought CHIV sapork BD thru bios update? |
|
|
Oct 12 2011, 02:08 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
bulldozer review is up:
https://forum.lowyat.net/topic/1538872/+1232 This post has been edited by saturn85: Oct 12 2011, 03:08 PM |
|
|
Oct 12 2011, 02:19 PM
|
Senior Member
548 posts Joined: Jan 2011
|
QUOTE(saturn85 @ Oct 12 2011, 03:17 AM) You forgot to mention that it was cooled using Liquid Nitrogen @ -192 Degree Celsius. |
|
|
Oct 12 2011, 02:36 PM
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
hi everyone,
I have a AMD 1100T with MSI P990FXA-GD65 mobo. The mobo comes with a software called OC GENIE II which OC the processor automatically. It works fine and the temperature is very good. In fact the temperature is so good that I suspect the temperature sensor is faulty. Setup: -Hyper TX3 with two 92mm blademaster PWM. One running @2900rpm another one running @1200rpm ( cannot adjust dont know why) -Casing: CM Storm Scout with one front intake, one back exhaust and one top exhaust (all stock fan) -Aircond room Clock: 232Mhz X 16.5 = 3828Mhz Vcore: 1.344V Idle; 1.416V Load Temperature: Min 28 Max 45 under Prim95 Is this normal? thanks |
|
|
Oct 12 2011, 02:55 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ericsim @ Oct 12 2011, 02:36 PM) hi everyone, Phenom II X6 are known to have some problem with its temp reading.. I'd say add another 10c to those reading.. I have a AMD 1100T with MSI P990FXA-GD65 mobo. The mobo comes with a software called OC GENIE II which OC the processor automatically. It works fine and the temperature is very good. In fact the temperature is so good that I suspect the temperature sensor is faulty. Setup: -Hyper TX3 with two 92mm blademaster PWM. One running @2900rpm another one running @1200rpm ( cannot adjust dont know why) -Casing: CM Storm Scout with one front intake, one back exhaust and one top exhaust (all stock fan) -Aircond room Clock: 232Mhz X 16.5 = 3828Mhz Vcore: 1.344V Idle; 1.416V Load Temperature: Min 28 Max 45 under Prim95 Is this normal? thanks Or u can check with hwmonitor for the temp.. |
|
|
Oct 13 2011, 12:50 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
anyone going bulldozer? reading review...
|
|
|
Oct 13 2011, 01:02 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Bulldozer is dissapointing.....
Doesn't worth the price to performance I better stick to the current X4/X6 |
|
|
Oct 13 2011, 01:17 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
QUOTE(shinjite @ Oct 13 2011, 01:02 AM) Bulldozer is dissapointing..... Doesn't worth the price to performance I better stick to the current X4/X6 |
|
|
Oct 13 2011, 02:57 AM
|
|
Junior Member
231 posts Joined: May 2009
|
after all the wait...I am really disappointed
...gonna switch to sb soon... |
|
|
Oct 13 2011, 07:12 AM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
probably the architecture is not yet optimized..
|
|
|
Oct 13 2011, 09:22 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
I suggest skip the current BD and wait for Enhanced BD in 2012 or next gen BD, as Ivy Bridge coming soon by Intel
Most important thing is they should fix their power consumption at OC levels, it is too high....thanks to its 2 Billion transistors |
|
|
Oct 13 2011, 09:44 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(jeff88rey @ Oct 13 2011, 07:12 AM) probably the architecture is not yet optimized.. QUOTE(shinjite @ Oct 13 2011, 09:22 AM) I suggest skip the current BD and wait for Enhanced BD in 2012 or next gen BD, as Ivy Bridge coming soon by Intel Agree with you, to say its a total failure isn't really correct, coz from most of the benchmark it seems when mostly heavily threaded it does excels almost on par with 2600k but alas its single threaded & IPC is the biggest weakness.. demmm.. Most important thing is they should fix their power consumption at OC levels, it is too high....thanks to its 2 Billion transistors Hmmm figuring maybe skipping this generation of BD, maybe wait for piledriver later on.. still if hands too itchy maybe wanna test ther FX4xxx, bwahahahaha Just love their ram bandwidth & ram oc, dual channel 1600mhz already on par with tri-channel 1066mhz.. |
|
|
Oct 13 2011, 09:52 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
dunno need wait how long again.... new core release to be slower than older phenom 2... (core per core performance)
dunno what AMD is doing.... check this out.... http://www.youtube.com/watch?v=SArxcnpXStE&feature=feedlik This post has been edited by cyberloner: Oct 13 2011, 10:00 AM |
|
|
Oct 13 2011, 09:58 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(shinjite @ Oct 13 2011, 09:22 AM) I suggest skip the current BD and wait for Enhanced BD in 2012 or next gen BD, as Ivy Bridge coming soon by Intel Most important thing is they should fix their power consumption at OC levels, it is too high....thanks to its 2 Billion transistors QUOTE(cloudwan @ Oct 13 2011, 09:44 AM) Agree with you, to say its a total failure isn't really correct, coz from most of the benchmark it seems when mostly heavily threaded it does excels almost on par with 2600k but alas its single threaded & IPC is the biggest weakness.. demmm.. IMO this is due to the fact they they want to constraint themselves to the same socket, Piledriver rumoured to be 10-15% better..add that to current conditions, still behind. Imagine when IvyBridge comes, Intel will be even further ahead. Hmmm figuring maybe skipping this generation of BD, maybe wait for piledriver later on.. still if hands too itchy maybe wanna test ther FX4xxx, bwahahahaha Just love their ram bandwidth & ram oc, dual channel 1600mhz already on par with tri-channel 1066mhz.. |
|
|
Oct 13 2011, 05:28 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
QUOTE(cyberloner @ Oct 13 2011, 09:52 AM) dunno need wait how long again.... new core release to be slower than older phenom 2... (core per core performance) It is because they extend the pipeline.....and its architecture excels a lot in multithreaded environment, they can only bank in on that to be competitivedunno what AMD is doing.... check this out.... http://www.youtube.com/watch?v=SArxcnpXStE&feature=feedlik Think back the old P4 Prescott days.....longer pipeline, maintain IPC and can scale very high but the effect with high clockspeeds = huge power consumption Read Anandtech's review, very detailed |
|
|
Oct 13 2011, 09:40 PM
|
Junior Member
16 posts Joined: Jan 2011 From: Kuala Lumpur
|
What is the best AMD AM3 processor to upgrade to with good overclocking capability?
Currently using AMD 4200+ from my old desktop overclocked it by 200 mhz only. thanks This post has been edited by Babysnatcher: Oct 13 2011, 09:41 PM |
|
|
Oct 13 2011, 10:05 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(Babysnatcher @ Oct 13 2011, 09:40 PM) What is the best AMD AM3 processor to upgrade to with good overclocking capability? to go for an AM3/3+ processor, you will need a mobo that supports it though...Currently using AMD 4200+ from my old desktop overclocked it by 200 mhz only. thanks depends on how much you want to OC it...the newly release batch of processors (AMD FX) can definitely OC..but performance is er..... unless it is for gaming Older Black Edition (BE) processors (ie. PhenomII) are also quite OC-able |
|
|
Oct 13 2011, 10:55 PM
|
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
QUOTE(cloudwan @ Oct 12 2011, 02:55 PM) Phenom II X6 are known to have some problem with its temp reading.. I'd say add another 10c to those reading.. thanks for your reply bro Or u can check with hwmonitor for the temp.. when i try boot into bios i see my temp is like 50 degree o.O is this more accurate than the software - coretemp? |
|
|
Oct 13 2011, 11:27 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ericsim @ Oct 13 2011, 10:55 PM) thanks for your reply bro bios should be from mobo sensors unless it is individual cores then it is directly from the sensors in the chip when i try boot into bios i see my temp is like 50 degree o.O is this more accurate than the software - coretemp?hwmonitor <55C should be ok |
|
|
Oct 14 2011, 11:38 AM
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
It seems that it's not worth upgrading from my current Phenom II x4 965 to either Bulldozer or the x6 CPU at the moment.
What you guys think which spec on my current rig would be worth upgrading for gaming? Moar RAM? Thanks. This post has been edited by athlonmax: Oct 14 2011, 11:39 AM |
|
|
Oct 14 2011, 11:57 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(athlonmax @ Oct 14 2011, 11:38 AM) It seems that it's not worth upgrading from my current Phenom II x4 965 to either Bulldozer or the x6 CPU at the moment. I'd say nothing, if still want to tho get urself a better GPU GTX560 ker or HD6950 ker.. bwahahaha What you guys think which spec on my current rig would be worth upgrading for gaming? Moar RAM? Thanks. |
|
|
Oct 14 2011, 12:03 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(cloudwan @ Oct 14 2011, 11:57 AM) I'd say nothing, if still want to tho get urself a better GPU GTX560 ker or HD6950 ker.. bwahahaha Yeah that the first thing comes on my mind(upgrading the video card), unless i made a wholesome change to Intel core i5 or i7 2600K Adding the RAM up to 8GB will be any major difference? or just minor only? |
|
|
Oct 14 2011, 02:42 PM
|
Senior Member
4,934 posts Joined: Sep 2008 From: Setapak
|
QUOTE(athlonmax @ Oct 14 2011, 11:38 AM) It seems that it's not worth upgrading from my current Phenom II x4 965 to either Bulldozer or the x6 CPU at the moment. ur GCWhat you guys think which spec on my current rig would be worth upgrading for gaming? Moar RAM? Thanks. QUOTE(athlonmax @ Oct 14 2011, 12:03 PM) Yeah that the first thing comes on my mind(upgrading the video card), unless i made a wholesome change to Intel core i5 or i7 2600K depends on ur usage. are u a heavy browser with 20+ tabs? do u do idle gaming + active gaming simultaneously? Adding the RAM up to 8GB will be any major difference? or just minor only? do u use heavy cpu processing, like video encoding, photoshop, n etc? for me, the different i notice after i upgrade to 8gb is. There is always more room for more apps 4gb is not enough for me since im a heavy browser, open TF 2 idle + BF 3 o other games. which is juz utilize 4-5gb in total. but im a happy man now since i no need to worry ram restriction. |
|
|
Oct 14 2011, 02:59 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(sai86 @ Oct 14 2011, 02:42 PM) ur GC Yeah i'm more into heavy browser with alot of tabs open + active gaming + music/movies while gaming.depends on ur usage. are u a heavy browser with 20+ tabs? do u do idle gaming + active gaming simultaneously? do u use heavy cpu processing, like video encoding, photoshop, n etc? for me, the different i notice after i upgrade to 8gb is. There is always more room for more apps 4gb is not enough for me since im a heavy browser, open TF 2 idle + BF 3 o other games. which is juz utilize 4-5gb in total. but im a happy man now since i no need to worry ram restriction. This machine purely for entertainment, so no video encoding or photoshop running whatsoever. |
|
|
Oct 14 2011, 03:47 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
QUOTE(Babysnatcher @ Oct 13 2011, 09:40 PM) What is the best AMD AM3 processor to upgrade to with good overclocking capability? The new AMD FX has very good overclocking potential, on air potentially 4.6GhzCurrently using AMD 4200+ from my old desktop overclocked it by 200 mhz only. thanks But you will need a AM3+ mobo to go along with it Older PHENOM II would be the X6 Thubans, improved IMC and better RAM overclocks athlonmax: For your case, upgrade your GPU is the most important one. RAM 4GB is good enough and since DDR3 is so cheap now, make it 8GB |
|
|
Oct 14 2011, 04:21 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(shinjite @ Oct 14 2011, 03:47 PM) The new AMD FX has very good overclocking potential, on air potentially 4.6Ghz Older Phenom II still good yeah, might as well take the x6 1100T terus But you will need a AM3+ mobo to go along with it Older PHENOM II would be the X6 Thubans, improved IMC and better RAM overclocks athlonmax: For your case, upgrade your GPU is the most important one. RAM 4GB is good enough and since DDR3 is so cheap now, make it 8GB Alright, the GPU it is then, might upgrade the RAM to 8GB too, 4gb 2x pc! Thanks alot! This post has been edited by athlonmax: Oct 14 2011, 04:22 PM |
|
|
Oct 14 2011, 04:33 PM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
hmm no one wanna buy bulldozer?
|
|
|
Oct 14 2011, 05:09 PM
|
|
Senior Member
1,162 posts Joined: Oct 2007 From: 8.8.4.4
|
after some review, i think many of us prefer stay with previous phenomII.. or else, move to sandy..
|
|
|
Oct 14 2011, 05:50 PM
|
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
QUOTE(dafreak @ Oct 13 2011, 11:27 PM) bios should be from mobo sensors unless it is individual cores then it is directly from the sensors in the chip I tried using hwmonitor just now, all temperatures are shown except the CPU? it says 0 degree C for all hwmonitor <55C should be ok |
|
|
Oct 14 2011, 06:07 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
can post screenshot?..normally for thuban should have temps shown...try using the tmpin
|
|
|
Oct 14 2011, 08:00 PM
|
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
hey bro here the screenshot. After restarting my computer now it is working. It shows 30+ degree also o.O also why my +12V at HWMONITOR shows 13.99V
|
|
|
Oct 14 2011, 09:59 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ericsim @ Oct 14 2011, 08:00 PM) hey bro here the screenshot. After restarting my computer now it is working. It shows 30+ degree also o.O also why my +12V at HWMONITOR shows 13.99V looks okay to me
mind taking another while priming/stressing? |
|
|
Oct 14 2011, 11:40 PM
|
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
I not really sure how to use Prime95. I click Option >> Torture Test >> In place large FFTs. Is this correct?
Mind that I changed my fsb to 232 mhz X 16.5 = 3828Mhz. Temperature too low? thanks for your help bro 
This post has been edited by ericsim: Oct 14 2011, 11:40 PM |
|
|
Oct 14 2011, 11:49 PM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
temps look fine to me, it is < 50C lol
|
|
|
Oct 15 2011, 12:20 AM
|
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
Temperatures look fine indeed. But it is too low for my expectation. I was thinking like 60 degree since I am only using Hyper TX3 tower fan =/
Thanks for your help bro, really appreciate it! |
|
|
Oct 15 2011, 12:24 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(cyberloner @ Oct 14 2011, 04:33 PM) hmm no one wanna buy bulldozer? it is overprice now.can consider if it drop to reasonable price. |
|
|
Oct 15 2011, 12:35 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
QUOTE(ericsim @ Oct 15 2011, 12:20 AM) Temperatures look fine indeed. But it is too low for my expectation. I was thinking like 60 degree since I am only using Hyper TX3 tower fan =/ lol Thanks for your help bro, really appreciate it! low temps means no need to worry so much la... |
|
|
Oct 15 2011, 01:24 AM
|
|
Junior Member
62 posts Joined: Jan 2006 From: Subang Jaya
|
QUOTE(dafreak @ Oct 15 2011, 12:35 AM) lol oh yea can save rm300 since I do not need Noctua now low temps means no need to worry so much la... |
|
|
Oct 15 2011, 05:59 PM
|
Senior Member
587 posts Joined: May 2011
|
noctua cooler look ugly
like nh d14 so damm big and block ram especially those ram with heatsink Added on October 15, 2011, 6:00 pmwhat happen to bulldozer anyway ? why so many bad comment haizz.. This post has been edited by Economics Crisis: Oct 15 2011, 06:00 PM |
|
|
Oct 15 2011, 08:05 PM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
bulldozer is not that bad actually.... it was the software itself is not update to support multicore.... just a simple demo here...
http://www.guru3d.com/article/amd-fx-8150-...rmance-review/6 as we can see in 3dmark 06 the 1100t wins over bulldozer... but in Vantage the bulldozer wins back... What you guys think? |
|
|
Oct 15 2011, 08:21 PM
|
|
Senior Member
587 posts Joined: May 2011
|
owh..ok thanks for the info
i feel a bit disappointing too after look at those benchmark |
|
|
Oct 15 2011, 08:40 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
conclusion from guru3d:
http://www.guru3d.com/article/amd-fx-8150-...essor-review/21 QUOTE AMD has set the strategy to pursue processors with as many CPU cores as possible. The Bulldozer design is scalable, very scalable, meaning they are focusing on more CPU cores. The benefit here is that massively threaded applications really like that very much. Look at the Handbrake (multi-threaded video transcoding application) results and content creation with MAXON's animation software CINEMA 4D. It's there where the processor really flexes its muscles. To put it very simple, the hardware needs the software in order to shine. However, the problem remains that most software anno 2011 certainly doesn't multi-thread as well as we all would have hoped. Most applications go for two, maybe four cores. It's already hard to utilize six threads simultaneously, let alone eight. As such, per-core performance is much more important than more processor cores. That is a matter of time though, I mean we had the single core to dual-core revolution, quickly followed by four, six and thus now eight cores. So where multithreaded applications are programmed right AMD really starts to shine with the FX series. So the opposite effect is that with applications that prefer say two CPU threads and thus utilize only two cores... well that's where the FX series has a really hard time as the per core performance starts to lack significantly opposed to the competition. |
|
|
Oct 16 2011, 09:53 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
a lot review site is force to use asus crosshair 5 that bios is not matured enough to handle bulldozer... (UEFI bios)
some review site with other brand board will result different in the number. I say give bulldozer some time with the board and software. keep on digging bulldozer... lol |
|
|
Oct 16 2011, 02:13 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyberloner @ Oct 16 2011, 09:53 AM) a lot review site is force to use asus crosshair 5 that bios is not matured enough to handle bulldozer... (UEFI bios) yup bro, am not giving up on BD even performance is indeed not as good as expected (& the power consumption issue). money is ready but there's no stock in sg... some review site with other brand board will result different in the number. I say give bulldozer some time with the board and software. keep on digging bulldozer... lol |
|
|
Oct 16 2011, 02:55 PM
|
|
Senior Member
587 posts Joined: May 2011
|
http://forum.lowyat.net/topic/824909
here got stock ready for u This post has been edited by Economics Crisis: Oct 16 2011, 02:56 PM |
|
|
Oct 16 2011, 05:47 PM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
that is kapak price u know?
|
|
|
Oct 17 2011, 12:34 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
Guys, most of the reviews they did was using ASUS's CH5 mobo
Try to take a look at hardware heaven's review with Asrock 990FX Extreme4 mobo http://www.hardwareheaven.com/reviews/1285...troduction.html Apparently in games, the BD FX is competitive O_O" and is the only reviewer that reviewed the chip without the ASUS mobo. That shows something is fishy right? |
|
|
Oct 17 2011, 03:28 PM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
QUOTE(shinjite @ Oct 17 2011, 12:34 PM) Guys, most of the reviews they did was using ASUS's CH5 mobo that shows bulldozer does shine~ Try to take a look at hardware heaven's review with Asrock 990FX Extreme4 mobo http://www.hardwareheaven.com/reviews/1285...troduction.html Apparently in games, the BD FX is competitive O_O" and is the only reviewer that reviewed the chip without the ASUS mobo. That shows something is fishy right? |
|
|
Oct 17 2011, 05:58 PM
|
|
Junior Member
187 posts Joined: Apr 2011 From: Kota Kinabalu
|
bd does shine.. juz tat the performance not as strong as intel.. in term of value, it beats intel for me
|
|
|
Oct 17 2011, 09:09 PM
|
|
Junior Member
231 posts Joined: May 2009
|
With huge power consumption....
|
|
|
Oct 17 2011, 09:28 PM
|
Newbie
1 posts Joined: Oct 2011 From: Kuching
|
Hope bulldozer will get better review. After waiting for so long don hope come out with this kind of result
|
|
|
Oct 18 2011, 04:55 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
Ok upgraded my video card from GTX460 to MSI GTX570, BF3 here i comeee...
maybe RAM or Casing next! hehe This post has been edited by athlonmax: Oct 18 2011, 04:56 PM |
|
|
Oct 19 2011, 01:46 AM
|
|
Senior Member
7,863 posts Joined: May 2007 From: highbury
|
asrock fatality is looking good . does it attract you all ?
|
|
|
Oct 19 2011, 03:27 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
QUOTE(fcuk90 @ Oct 19 2011, 01:46 AM) asrock fatality is looking good . does it attract you all ? http://www.asrock.com/mb/overview.asp?Mode...%20Professionalvery cool board indeed |
|
|
Oct 19 2011, 09:02 AM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
That is one of the boards I am eyeing along with the MSI 990FX-GD80
|
|
|
Oct 19 2011, 09:36 AM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
That Asrock mobo looks nice!
This post has been edited by athlonmax: Oct 19 2011, 10:08 AM |
|
|
Oct 19 2011, 08:27 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
New AMD X4 960T can unlock to X6 (E0 stepping)
This post has been edited by shinjite: Oct 19 2011, 08:27 PM |
|
|
Oct 19 2011, 09:22 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Oct 19 2011, 08:27 PM) New AMD X4 960T can unlock to X6 (E0 stepping) prolly something to console d disappointed fans... eventhou fx is disappointin in some if not most tests, i'm really lookin forward on how well it can do in ram oc... |
|
|
Oct 20 2011, 12:47 AM
|
|
Senior Member
7,863 posts Joined: May 2007 From: highbury
|
QUOTE(cyberloner @ Oct 19 2011, 03:27 AM) combo with fx4100 , it cost only slight above 1k . |
|
|
Oct 20 2011, 09:45 AM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
I think i did my mainboard or CPU, after i tried OC it in the BIOS(adjusting the voltage and all) i rebooted the PC and suddenly there's no display(the CPU fan spin for 1-2 sec and stopped,can't do anything)There's no beeping sound or anything.
i tried removing the ram, and reseated my processor still the same.So i bricked either my mobo or CPU? |
|
|
Oct 20 2011, 09:55 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(athlonmax @ Oct 20 2011, 09:45 AM) I think i did my mainboard or CPU, after i tried OC it in the BIOS(adjusting the voltage and all) i rebooted the PC and suddenly there's no display(the CPU fan spin for 1-2 sec and stopped,can't do anything)There's no beeping sound or anything. reset bios mebe? it's kinda common, but if after clear cmos still no boot, something is wrong. i tried removing the ram, and reseated my processor still the same.So i bricked either my mobo or CPU? |
|
|
Oct 20 2011, 10:08 AM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(ah_khoo @ Oct 20 2011, 09:55 AM) reset bios mebe? it's kinda common, but if after clear cmos still no boot, something is wrong. Already removed the CMOS battery and still the same.I've checked my manual, i can't find any Bios reset on the board.It's a Gigabyte GA-880GMA-UD2H. Give me a reason to upgrade then, zzzzzzzzz |
|
|
Oct 20 2011, 10:25 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(athlonmax @ Oct 20 2011, 10:08 AM) Already removed the CMOS battery and still the same.I've checked my manual, i can't find any Bios reset on the board. u didn't even managed to run d oc setup rite (since ur not able to boot after change d setting)? It's a Gigabyte GA-880GMA-UD2H. Give me a reason to upgrade then, zzzzzzzzz very unlikely for d board just to die like that. check d manual properly, look for jumper called CLR_CMOS. all d best... |
|
|
Oct 20 2011, 10:39 AM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
» Click to show Spoiler - click again to hide... « giga normal like this..not normal jumpe but just 2 standing pins. look below the pci lane..got.. take metal and just touch both pins.. |
|
|
Oct 20 2011, 10:41 AM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(ah_khoo @ Oct 20 2011, 10:25 AM) u didn't even managed to run d oc setup rite (since ur not able to boot after change d setting)? yea i can't run anything cos the screen has no display. very unlikely for d board just to die like that. check d manual properly, look for jumper called CLR_CMOS. all d best... Yea i found the online manual for clearing the cmos on the board, hmm weird i think i already checked my manual couple times already,but didnt find those page. Ok when i will try that when i got back from work later today. Thanks! Added on October 20, 2011, 10:45 am QUOTE(kuntawakaw @ Oct 20 2011, 10:39 AM) » Click to show Spoiler - click again to hide... « giga normal like this..not normal jumpe but just 2 standing pins. look below the pci lane..got.. take metal and just touch both pins.. This post has been edited by athlonmax: Oct 20 2011, 10:45 AM |
|
|
Oct 20 2011, 02:08 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(athlonmax @ Oct 20 2011, 10:41 AM) yea i can't run anything cos the screen has no display. If kong get MSI 990FX-GD80 pliss.. bwahahaha Yea i found the online manual for clearing the cmos on the board, hmm weird i think i already checked my manual couple times already,but didnt find those page. Ok when i will try that when i got back from work later today. Thanks! Added on October 20, 2011, 10:45 am ok kun, thanks! i will try later, hopefully my m/board kong so i can replace it! lol |
|
|
Oct 20 2011, 02:36 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(cloudwan @ Oct 20 2011, 02:08 PM) If kong get MSI 990FX-GD80 pliss.. bwahahaha Wah i thought that one is expensive?If really mobo kong, which AM3+ mobo u guys recommend? not too one lah like crosshair or something. Maybe budget around RM500 or something near that amount. |
|
|
Oct 20 2011, 03:15 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Hmmmm how about:
ASUS M5A97 RM345 G-BYTE 970A-D3 RM339 G-BYTE 990FXA-D3 RM499 |
|
|
Oct 20 2011, 03:56 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(cloudwan @ Oct 20 2011, 03:15 PM) Hmmmm how about: hmm the Asus from the review looks okay, hmm should i upgrade CPU also?ASUS M5A97 RM345 G-BYTE 970A-D3 RM339 G-BYTE 990FXA-D3 RM499 Phenom II x6 1090T looks nice |
|
|
Oct 20 2011, 04:01 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(athlonmax @ Oct 20 2011, 03:56 PM) hmm the Asus from the review looks okay, hmm should i upgrade CPU also? one vote for asus too, if possible, get d pro version. Phenom II x6 1090T looks nice depends on ya computing need, actually an x4 should be suffice for normal users, don't upgrade just for d sake of upgradin. |
|
|
Oct 20 2011, 05:51 PM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
QUOTE(athlonmax @ Oct 20 2011, 03:56 PM) hmm the Asus from the review looks okay, hmm should i upgrade CPU also? go bulldozer~ screw the benchmark... it will grow faster in future software update .... Phenom II x6 1090T looks nice |
|
|
Oct 20 2011, 06:04 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(cyberloner @ Oct 20 2011, 05:51 PM) go bulldozer~ screw the benchmark... it will grow faster in future software update .... Yea i've been thinking for Bulldozer too! Should i closed my eyes and pretend it's good? |
|
|
Oct 20 2011, 07:23 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(athlonmax @ Oct 20 2011, 06:04 PM) Yea i've been thinking for Bulldozer too! Should i closed my eyes and pretend it's good? go for it if budget allowed. |
|
|
Oct 20 2011, 08:11 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
Looks like my mainboard is okay
cleared the CMOS jumper and able to boot up again.Trying to O/C to 4Ghz, last time i just changed the multiplier and didn't increase the cpu vcore temp yet. Attached thumbnail(s) 
|
|
|
Oct 21 2011, 01:13 PM
|
|
All Stars
19,306 posts Joined: Jan 2003 From: Klang
|
QUOTE(athlonmax @ Oct 20 2011, 06:04 PM) Yea i've been thinking for Bulldozer too! Should i closed my eyes and pretend it's good? Why wanna cheat yourself hahahaWait till price drop plus B3 stepping is in the works and Enhanced BD next year Enjoy Thuban first or Deneb |
|
|
Oct 21 2011, 02:19 PM
|
|
Junior Member
558 posts Joined: Jan 2003 From: Batu Caves/Gombak
|
QUOTE(shinjite @ Oct 21 2011, 01:13 PM) Why wanna cheat yourself hahaha Yeah i think i'll wait for further revision of BD first, and see from there.Wait till price drop plus B3 stepping is in the works and Enhanced BD next year Enjoy Thuban first or Deneb And i'm thinking adding first new AM3+ mobo + new casing(CM II plus Nvidia edition) and water cooling(Corsair Hydro H100 or H80?) This post has been edited by athlonmax: Oct 21 2011, 02:20 PM |
|
|
Oct 28 2011, 11:02 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
mostly all move to intel adi?
|
|
|
Oct 28 2011, 12:37 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cyberloner @ Oct 28 2011, 11:02 AM) mostly all move to intel adi? i'm toastin my ram bro, but d fx4100 is kinda let down in term of cpu MHz... will post something tonite, hopefully d prime still runnin when i reach home... |
|
|
Oct 28 2011, 07:18 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(ah_khoo @ Oct 28 2011, 12:37 PM) i'm toastin my ram bro, but d fx4100 is kinda let down in term of cpu MHz... will post something tonite, hopefully d prime still runnin when i reach home... yeah, looking forward for the fx-4100 overclock ability. |
|
|
Oct 29 2011, 08:45 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
QUOTE(ah_khoo @ Oct 28 2011, 12:37 PM) i'm toastin my ram bro, but d fx4100 is kinda let down in term of cpu MHz... will post something tonite, hopefully d prime still runnin when i reach home... hope u get some good clock... bulldozer available already in singapore |
|
|
Oct 31 2011, 09:44 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(cyberloner @ Oct 29 2011, 08:45 AM) hope u get some good clock... bulldozer available already in singapore Hahahaha khoo got his bulldozer not from SG yoo, he import from MY also.. Hahahaha... |
|
|
Oct 31 2011, 10:26 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
malaysia, d home of lemong chips...
i see ppl play fx8 @ 4.7GHz prime stable w/ 1.4v i feel like removin d pins of my chip one by one... |
|
|
Oct 31 2011, 10:49 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Oct 31 2011, 10:26 AM) malaysia, d home of lemong chips... Bwahahahaha, what to do, the cpu got rendam during the Bangkok flood so a bit lemau.. beside not me bought for u ok, it was sarahlah fault.. hahahahai see ppl play fx8 @ 4.7GHz prime stable w/ 1.4v i feel like removin d pins of my chip one by one... If ur unhappy u can always throw the fx4100 to me |
|
|
Oct 31 2011, 08:14 PM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
QUOTE(ah_khoo @ Oct 31 2011, 10:26 AM) malaysia, d home of lemong chips... share some results? i see ppl play fx8 @ 4.7GHz prime stable w/ 1.4v i feel like removin d pins of my chip one by one... |
|
|
Nov 2 2011, 04:58 AM
|
|
Senior Member
8,686 posts Joined: Mar 2009
|
|
|
|
Nov 3 2011, 04:23 AM
|
Junior Member
56 posts Joined: Jul 2011 From: Kelantan
|
good oc or not? apa yang perlu diperbaiki lagi?
 cpu nb voltage @ 1.100  vs  yang mana lebih baik eh? |
|
|
Nov 3 2011, 04:52 AM
|
|
Senior Member
1,560 posts Joined: May 2005 From: Penang
|
of cause 1600 one....
|
|
|
Nov 3 2011, 05:03 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
I vote for 1600mhz with tighter timings
|
|
|
Nov 3 2011, 11:18 PM
|
|
Junior Member
231 posts Joined: May 2009
|
Lg cun klo ko rendahkan timing yg 1600mhz tu...
|
|
|
Nov 4 2011, 11:57 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
still strivin for higher freq...
|
|
|
Nov 8 2011, 12:26 AM
|
Senior Member
1,384 posts Joined: Jan 2007 From: shah alam@ ampang
|
QUOTE(athlonmax @ Oct 20 2011, 10:08 AM) Already removed the CMOS battery and still the same.I've checked my manual, i can't find any Bios reset on the board. i think it ur procIt's a Gigabyte GA-880GMA-UD2H. Give me a reason to upgrade then, zzzzzzzzz |
|
|
Nov 13 2011, 08:48 AM
|
Senior Member
1,041 posts Joined: Nov 2010 From: shah alam----ttdi
|
hello..i need some advice again from sifu and other forumers..
i have found the suitable step to oc my unlock 4thcore after 36 hours of non stop effort currently now running at 3.6ghz 4 core...just pass the 3.4ghz mark yesterday after 8.5 hours prime95 stress test (blend). now currently running a test for 3.6ghz @ 1.5v..how safe are the cpu at 1.5v?i've tried @ 3core to check the temperature..max @ 60c with 3.4ghz so ill be expecting higher 5c my ambient temperature is around 28-30 celcius this are my build: 1) AMD Phenom II X3 720 Black Edition 2) ECS 780GM-A Ultra Motherboard 3) 4 units of 1GB DDR2 800 Ram @400Mhz 4) OCZ vanquisher CPU Cooler 5) Cooler Master Blue Ice North Bridge Cooler 6) ati radeon hd6790 7) Vantex Ion+ 550wPower Supply 8) DVD rom 9) CoolerMaster 690 Casing and any advice ? |
|
|
Nov 13 2011, 11:26 AM
|
|
Senior Member
1,064 posts Joined: Jul 2008 From: Star Stuff
|
keep it below 60C, i think @ 3.6ghz will hit >60C already
|
|
|
Nov 14 2011, 04:55 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Do u really need 1.5v to go 3.6ghz? Maybe its ur 4phase ecs mobo holding it back?
|
|
|
Nov 15 2011, 11:49 AM
|
All Stars
20,901 posts Joined: Jan 2003 From: Miri, Sarawak
|
Any1 using ASrock 990FX Fatality to OC FX-8150 proc? Seems to have some trouble here..
OC d stable around 4.4GHz only.. if like that use turbo-Core also faster.. |
|
|
Nov 15 2011, 03:00 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(StratOS @ Nov 15 2011, 11:49 AM) Any1 using ASrock 990FX Fatality to OC FX-8150 proc? Seems to have some trouble here.. can give details of ya setup? i have a fx4100 which is a lemon chip, 4.5GHz quick bench still manageable, but not prime stable for sure. most if not all 8150 should be able to do 4.4GHz w/o breakin a sweat. here are my find outs so far:OC d stable around 4.4GHz only.. if like that use turbo-Core also faster.. 1. bd imc oc is not as fun as thuban where 3k can be easily achievable 2. ht link freq is best to keep @ auto (my own experience, ymmv) 3. ram oc is goodin |
|
|
Nov 15 2011, 04:06 PM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
I read somewhere with BD is kinda like terbalik eh? I mean NB kenot go more than HTlink? Is it true khoo?
|
|
|
Nov 15 2011, 04:57 PM
|
|
All Stars
20,901 posts Joined: Jan 2003 From: Miri, Sarawak
|
QUOTE(ah_khoo @ Nov 15 2011, 03:00 PM) can give details of ya setup? i have a fx4100 which is a lemon chip, 4.5GHz quick bench still manageable, but not prime stable for sure. most if not all 8150 should be able to do 4.4GHz w/o breakin a sweat. here are my find outs so far: Now is running at 4.6 stable.. BTW, not my pc,, customer 1.. 4.6GHz stable but in bios i have to set the voltage to 1.6725V.. OCCT stress test last 43 minutes then hang.. 1. bd imc oc is not as fun as thuban where 3k can be easily achievable 2. ht link freq is best to keep @ auto (my own experience, ymmv) 3. ram oc is goodin |
|
|
Nov 15 2011, 05:09 PM
|
|
Senior Member
2,736 posts Joined: Dec 2006
|
QUOTE(StratOS @ Nov 15 2011, 04:57 PM) Now is running at 4.6 stable.. BTW, not my pc,, customer 1.. 4.6GHz stable but in bios i have to set the voltage to 1.6725V.. OCCT stress test last 43 minutes then hang.. u need sub zero |
|
|
Nov 15 2011, 11:39 PM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Nov 15 2011, 04:06 PM) I read somewhere with BD is kinda like terbalik eh? I mean NB kenot go more than HTlink? Is it true khoo? yup bro, nb oc on bd is not so goodin, for 24/7 2.6GHz is d ideal one, ht link on other hand can easily goes about 3k... QUOTE(StratOS @ Nov 15 2011, 04:57 PM) Now is running at 4.6 stable.. BTW, not my pc,, customer 1.. 4.6GHz stable but in bios i have to set the voltage to 1.6725V.. OCCT stress test last 43 minutes then hang.. something wrong somewhere... 1.67v for a 4.6GHz is too much... d chip will degrade in no time... |
|
|
Nov 16 2011, 12:01 AM
|
|
All Stars
20,901 posts Joined: Jan 2003 From: Miri, Sarawak
|
i know.. so now sourcing out the problem.. keep looking for any1 using the same mobo but failed.. lol..
Even on C5F on another pc it can hit 5.0 easy on 1.55V also can.. |
|
|
Nov 16 2011, 10:05 AM
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(StratOS @ Nov 16 2011, 12:01 AM) i know.. so now sourcing out the problem.. keep looking for any1 using the same mobo but failed.. lol.. if same chip can do 5GHz on other board while having problem to hit 4.6GHz on Fat, then there must be some setting issue (most prolly adv setting), or d bios can't make it. spec wise Fat is one of d best out there... Even on C5F on another pc it can hit 5.0 easy on 1.55V also can.. |
|
|
Nov 16 2011, 11:59 AM
|
|
Senior Member
8,514 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
QUOTE(ah_khoo @ Nov 16 2011, 10:05 AM) if same chip can do 5GHz on other board while having problem to hit 4.6GHz on Fat, then there must be some setting issue (most prolly adv setting), or d bios can't make it. spec wise Fat is one of d best out there... Does Asrock have that Load line calibration thingy? IIANM i read somewhere some fail oc plus high volt needed was becoz in some mobo like gigabyte they don't have that feature..Voltage drops & need to pile in the volt to overcompensate it is what making the need for high volt in oc.. demmm |
|
|
Nov 16 2011, 01:02 PM
|
Junior Member
375 posts Joined: Oct 2009 From: Bukit Tunku
|
guys can comment on my settings?
 i prime95 around 1 hour with custom blend 2 minutes for each FFT. thanks. edited: resize photo This post has been edited by zuiichi: Nov 16 2011, 01:05 PM |
|
|
Nov 16 2011, 01:10 PM
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(zuiichi @ Nov 16 2011, 01:02 PM) guys can comment on my settings? increase clock!! i suggest go by multi. if your chip is not lemon, then 3.6ghz is easy with voltage below 1.4i prime95 around 1 hour with custom blend 2 minutes for each FFT. thanks. edited: resize photo and also the NB freq. make it around 2.5Ghz and, reseat your gc. its running x1 now |
|
|
Nov 16 2011, 01:58 PM
|
|
Junior Member
375 posts Joined: Oct 2009 From: Bukit Tunku
|
okay, first thing first, what is lemon chip? before unlocked, i can go up at 3.6, but after unlocked to get to this, i already increase vcore to 1.38Xv.
after i tell u this, do this advice QUOTE(kuntawakaw @ Nov 16 2011, 01:10 PM) increase clock!! i suggest go by multi. if your chip is not lemon, then 3.6ghz is easy with voltage below 1.4 still applies? sry, if what im asking is pretty obvious for u ppl.im still new.and also the NB freq. make it around 2.5Ghz okay,i will reseat my gc now. will post new screenies later. thanks. Added on November 16, 2011, 3:13 pmi tried reseating my gc, still at x1. i tried overclocking pcie from 100mhz to 101mhz, still at x1 use cpu-z and gpu-z to check. both same result at x1. any ideas? This post has been edited by zuiichi: Nov 16 2011, 03:13 PM |
| Change to: |  0.2186sec
 0.49
 6 queries
 GZIP Disabled
Time is now: 25th November 2025 - 11:37 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.