He is stationed at sg bro, just like me.

Btw, if 8gb needed, why go for 4 dimm bro? It's nothing new that most if not all amd boards not doin gud in 4dimm oc.

I believe d board will fly with 2 dimm oc. My cheapo winova can do 2.1k, i expect more from eco which is at least a class higher.

This post has been edited by ah_khoo: Jul 8 2011, 09:21 AM

asus play nice w/ winova 4gb, so i'd expect d same w/ 8gb. haven't tested ripjaws x on 9xx asus board, but 4gb kit was shiat on my 880evo. tough call, i think better wait or if ur close enuf w/ sir louis u can ask him to try for u on chv.

coz asus my not bringin in d model...

my 1100t which walled @ 2750MHz imc did a 3k on gd80... weeeee....

competition is too tight in MY ledi. We can see giga & msi are quite aggressive in term of pricing, even asus 'emselves are putting affordable tag on their flagship boards in TUF & ROG. bring in too many model (at almost similar price range mite jeopardize d sales imo)

This post has been edited by ah_khoo: Jul 8 2011, 11:33 AM

no, they are brought in by bro momokabuto in HWZ. Lifetime warranty @ $149 (8GB kit).

u can hardly find any 8gb kit can do 1600 @ 7-7-7 w/ 1.62v outta box which cost u less than $150...



tried that (IMC) on 880G EVO & 990X EVO, max bootable @ 2750MHz w/ below 1.35v, didn't bother to try higher volt as d chip is hot enuf liao.

this 1100t chip isn't d best so dun compare with ya retail chip...

This post has been edited by ah_khoo: Jul 8 2011, 09:32 AM

meh... there're alot ram can do 2k @ 7-9-7 even on 8xx series boards, so this isn't something spectacular considerin it is done on 990fx... i hardly play w/ 8GB kits as winova 8GB is d only kit i've ever tested. highest if i'm not mistaken was 1800 @ 8-9-8. 8-8-8, ss HERE..

it's chip dependent too bro, for thuban, deneb & below, highest divider we have is ddr 1600, which is equal to 4 x htt. for lowers we have ddr 1333, 1066 & 800. sadly for ram @ 2k, u can only use 1600 divider, lower dividers don't work when ram freq reaches near 2k & above.

winova played well on asus boards, but sadly, same thing can't be said on MSI 990fx boards. eco got no value in vrz nowadays. few days back elpibe10 sold his around $60/70 per pair only.

This post has been edited by ah_khoo: Jul 10 2011, 12:33 AM

what kinda AMD stuff ur lookin for sir? big shops like Fuwell, Cybermind, Bell Systems, VideoPro & PCThemes do carry AMD chips & boards, but apparently Intel offers more choices. There are very few AMD users in VR-Zone & HWZ, so that's self explanatory.

This post has been edited by ah_khoo: Jul 11 2011, 11:03 AM

d price of Sabertooth is too near to CHV, so if one plannin to go Sabertooth, mite as well get a CHV instead. Better PWM, nicer theme & more pcb layers (6vs 8). most importantly, d ROG series logo...

yup, PCT is one of d nicest shop in SLS, decent price, buck loads of goodies & friendly staffs...

u can buy chip/board separately sir, but bundle price ofkos cheaper.

i think quad as in max 4 gpu, either 2 cards w/ dual gpu or 4 cards w/ single gpu where else chv is tri way sli/x-fire, it can be either 3 cards with single or dual gpu??? perhaps some sifu can enlighten us on this. but logically speaking there's no way a sabertooth can be better than chv (on paper at least), unless warranty wise.

This post has been edited by ah_khoo: Jul 14 2011, 10:40 AM

it's d same w/ chv too bro, as of now, no board can offer tri cfx @ 16x each...

agreed bro... some more, moolah spent on 6950 can buy 5750 for tri/quad fire...

lemme share with u those that i know:

1. 6 layers pcb vs 8 layers pcb
2. 5 years warranty vs 3 years warranty
3. better pwm (compared to evo series) vs better pwm than saber
4. that hard to match color theme vs fiery red color theme

i supposed it's either bad qc or ur simple outta luck bro... now i'm even more determined to test d chv... wait for me yer... i'll go usha2 someone...

will just loan bro, but nothing firmed yet. GD80 is a keeper so not gonna sell until next socket...

thubsn is in d house ledi bro? can't wait for great results comin our ways...

y u no belip me bro?

bro, by all mean follow dato k's advise, generally 1090t is cooler & more clockable then some 1100t. just need to get d right batch then u'll see d chip flies...

1018 & 1021 are d batches which impressed me d most. My ex 1055 (batch 1018) did 3.9ghz w 1.33v while d 1090 (batch 1021) did 4ghz w 1.38v iirc. Both chip can do 3k nb w less than 1.3v too..

This post has been edited by ah_khoo: Jul 18 2011, 10:22 AM

i has a sad, it seemed i'm too knob to run high freq on this board. < 2k @ decent timing is all i can do...

bro, here is d link in HWZ

i dunno bout 8gb kit coz winova is d only pair i've ever tested. but for its price, i can say nothing beat it. what u'll lose is a bit of aesthetics look + no kick ass name.

thumbs up for foldin, keep up d good works bro...

2.1k (super lax timing like 9-10-9) was a breeze on asus board provided ur on 9xx + thuban + winova 4GB kit. what ram ur usin bro?

it's user problem bro... bro clon22 hit 2.2k @ 7-10-7 w/o sweat, but noob like me kenot...

can't wait...

never try x6 on that board so i can't really comment. but in general, 9xx > 8xx > 7xx, this applies at least on ram oc. ofcoz, i'm talkin bout decent board, not someone's ordinary alibaba boards.

edited: there're few exceptions thou... see bro verdict usin 790fx-gd70 oc like charm i'm like eatin my own words...

This post has been edited by ah_khoo: Jul 19 2011, 10:16 AM

w/ ya past records, i'm sure it will bro...

gd70 @ 4+1, need to take extra precautions when u prime it usin high volts. actively cool d pwm can prevent shits happen.