hi everyone,
I have a AMD 1100T with MSI P990FXA-GD65 mobo. The mobo comes with a software called OC GENIE II which OC the processor automatically. It works fine and the temperature is very good. In fact the temperature is so good that I suspect the temperature sensor is faulty.

Setup:
-Hyper TX3 with two 92mm blademaster PWM. One running @2900rpm another one running @1200rpm ( cannot adjust dont know why)
-Casing: CM Storm Scout with one front intake, one back exhaust and one top exhaust (all stock fan)
-Aircond room

Clock: 232Mhz X 16.5 = 3828Mhz
Vcore: 1.344V Idle; 1.416V Load
Temperature: Min 28 Max 45 under Prim95

Is this normal?

thanks

thanks for your reply bro when i try boot into bios i see my temp is like 50 degree o.O is this more accurate than the software - coretemp?

I tried using hwmonitor just now, all temperatures are shown except the CPU? it says 0 degree C for all

hey bro here the screenshot. After restarting my computer now it is working. It shows 30+ degree also o.O also why my +12V at HWMONITOR shows 13.99V

I not really sure how to use Prime95. I click Option >> Torture Test >> In place large FFTs. Is this correct?

Mind that I changed my fsb to 232 mhz X 16.5 = 3828Mhz. Temperature too low?

thanks for your help bro



This post has been edited by ericsim: Oct 14 2011, 11:40 PM

Temperatures look fine indeed. But it is too low for my expectation. I was thinking like 60 degree since I am only using Hyper TX3 tower fan =/

Thanks for your help bro, really appreciate it!

oh yea can save rm300 since I do not need Noctua now