guys can comment on my settings?



i prime95 around 1 hour with custom blend 2 minutes for each FFT.

thanks.


edited: resize photo

This post has been edited by zuiichi: Nov 16 2011, 01:05 PM

okay, first thing first, what is lemon chip? before unlocked, i can go up at 3.6, but after unlocked to get to this, i already increase vcore to 1.38Xv.
after i tell u this, do this advice

still applies? sry, if what im asking is pretty obvious for u ppl.im still new.

okay,i will reseat my gc now. will post new screenies later. thanks.

---

Added on November 16, 2011, 3:13 pmi tried reseating my gc, still at x1.
i tried overclocking pcie from 100mhz to 101mhz, still at x1

use cpu-z and gpu-z to check. both same result at x1.

any ideas?

This post has been edited by zuiichi: Nov 16 2011, 03:13 PM

bout the gc, done. yup, i cleaned the gold pin using cloth. OC 3.6 at 1.37? wow. maybe mine is lemon chip. =.=

---

Added on November 17, 2011, 1:06 pmit seems, i have the weakest chip of all. >.<
CPU-NB cant get stable at 2365 tried at 1.5v. crash...

This post has been edited by zuiichi: Nov 17 2011, 01:06 PM

hurm, i retry again this morning, following this guide

it says to overclock Ram, followed by CPUNB, later on CPU. i just finish prime95 for sharp 3 hour. any other setting i change from this, will give me crash reboot, or core 3 n 4 worker stopped in prime95.

this is my current settings:


if i try again, by overclocking cpu first and lowered the ram freq, will i gain more clock for cpu n CPUNB? thanks for ur reply.

p/s:now my; vcore = 1.39v, vcpunb = 1.28v, Vdram = 1.66v

i have tried CPUNB 2360mhz, vcpunb till 1.5v, still crashreboot. (sometimes when enter windoes, it reboot, soemtimes crash till blendtest with prime95).
also tried CPU 3332mhz, vcore till 1.43v, same result as above.

This post has been edited by zuiichi: Nov 17 2011, 06:11 PM

ops,my bad, reuploaded.altho i change a bit, start overclocking from CPU>CPUNB>RAM.
comments. thanks.