Hi everyone its me again this time i wanna open up a thread for R/C lovers..... i know there's oledy a thread for rc heli but tat one is jus asking for information and question .i wanna create a thread more formal one Ok now i have imported quite a few set of the heli to test out the market... and if anyone intrested can pm me ... but this thread is not about sales... jus information about rc heli

first one is

Salvation 1


Desp.
1. Up to 10-15 minutes flight time.
2. 3.7V 350mah lithium polymer battery is installed in the helicopter.
3. Completely stable in flight.
4. Perfect for indoor flight.
5. 3D flight, go forward, left and right
6. Rear rotor stabilizer for controlled turns
7. Hover trimming tab on controller stable hover and full 3-D flight
8. 3-channel radio controller

Salvation 4


Desp.
*3 Channel radio controlled
*Fly it forward;backward;turn left & right
*Proportional system enables it to move up & down and stay at any height.
*Co-axial structure enables it to fly stably indoors and outdoor.
*All spare parts are replaceable.
*Servo & transmitter upgraded available to be MODEL HELICOPTER

Salvation 9


Desp.
Coaxial structure effectively offers stable flight and easy operation. The Mini Lama is an optional model for the early beginner.
The combination of prompt servos and 2XN30 strong magnetic motors ensures various flight courses.
It's possible to adjust the servo extent and the sensitivity of the build-in gyro in the 3-in-1 receiver circuit. Customized fine adjustment makes your flight more perfect.

The high -volume 7.4v 480mAh Li-Polymer battery pack is equipped with charging protection function. A full charged cycle will offers the Mini Lama with 8 to 12minutes flight

Additional information for Salvation 1


Function

1. Up to 10-15 minutes flight time.
2. 3.7V 350mah lithium polymer battery is installed in the helicopter.
3. Completely stable in flight.
4. Perfect for indoor flight.
5. 3D flight, go forward, left and right
6. Rear rotor stabilizer for controlled turns
7. Hover trimming tab on controller stable hover and full 3-D flight
8. 3-channel radio controller

how much is one bro?and what is the size like?

Salvation 1 is jus around the size of ur palm ( the cockpit ) and salvation 4 is as long as a keyboard

cool size jacky...how much for one roughly?

nice is nice lar... fun oso fun... but if not wrong this is an expensive hobby ya? cost thousand and above?

bahh haha u guys are wrong ........ each cost around RM 150 biggier size one RM 200 + abit oni

ho ho ho... Nice Heli aaa... i never try Playing Rc helicopter. I only have Rc Car Skyline GTR No.12. Bought On 2001 On japan. So how Ur feeling play the heli?
Where ur Play it? Have area to Play? Coz For Rc car Have a Litar Now...How About Rc Helicopter?

I bought an rc chopper a while back. But one of the motors burnt out. On the manual its model number is

9092-06



They however dont state HOW exactly we can order these replacement parts.

Anyone with another broken Syma? Willing to sell? Heh

these look like clones of syma's choppers.

Salvation1 = Syma Clever Dragonfly

having said that, do you have spare parts for Salvation1? I need a rotor motor.

and bob, I'm pretty sure these choppers are for indoors. Im pretty sure for the first one at least. The litar is your house. Navigate from kitchen to living room without hitting walls. heh

This post has been edited by NightShadow: Jan 21 2007, 11:40 PM

bobmarley the first one is indoor one u can play in ur house.... no need much space la... i have a few to let go in garage sales u can have a look there

http://forum.lowyat.net/index.php?showtopic=401236&hl=

NightShadow ...... i can help u order but i dun think its cheap because need to ship from china... i think if motor u can buy here and pasang urself .. if u need a new one sure can contact me lah

This post has been edited by Jackygwh: Jan 22 2007, 10:54 AM

U selling salvation1 for rm150? Not including shipping? But I bought in Siong Lee Miri Rm130 ler. Although I cant prove it.

Found this. Same chopper. Rm89.00

http://www.lelong.com.my/Auc/List/2007-01DStd4772786.htm

But anyway, may I know the price of a replacement motor? I would like two please.

And I found this too. He sells his spare parts for RM35

http://www.lelong.com.my/Auc/List/2007-01DStd4772778.htm

Would like to know your price please. See who gives a better deal.

and how much is your salvation9? interested

This post has been edited by NightShadow: Jan 22 2007, 04:16 PM

oh design almost same la but the company is diff....... price diff also and the stability also diff

Damn. Those are good prices for the R/C helis.

Know any local shops in PJ/KL that supply them? Only cash-and-carry for me, no postage.

whcih u referring to ?? the salvation 1 i have 2 more left.......sold 3 oledy ...

Hmm. You have any non-coaxial model?
And are you from Kuching?

yeah from kch but no prob if u wan COD ..... at kl my friend toy shop also got stock

wat mean coaxial ?

non coaxial only has one main rotor. coaxial has two main rotors, each rotating in different directions.
also:

ohh u mean tat.........we call tat 3D or 4D...... 3 direction or 4 direction this one is 3D

do you have a link to your garage sales Salvation 9?

sorry salvation 9 hav to order..... but i do have tat one big one but diff design u intrested ?

sorry salvation 9 hav to order..... but i do have tat one big one but diff design u intrested ?

any big heli ka? like walkera 22e

---

Added on March 16, 2007, 4:23 pmhello, i'm looking for new belt-cp ep helicopter

This post has been edited by PootieTang_85: Mar 16 2007, 04:23 PM

the RC Helli is not a toy,....i but a 2 channel for RM130,need to tune it to fly,more then 3 hours ...very upset with the ~stable~ i buy a 4 channel colco for RM300...muahahaa,still not enuf stable...

woo RC helicopter ..! new player here kekeke my helicopter is V3 Lama currently keep langgar tiang = =" so hard to control it

just want to share with LYN forumers. i don`t know what is this thing exactly. its neither an aeroplane nor helicopter. but it is a FLYING SOFTLAN. hehe.. one old folk from my hometown mod this. he`s a die-hard fan of RC world. cayalah paklong!. hehe..


Attached thumbnail(s)

u need to balance the blade, and make some slight changes on the servo. becos they all are not balance when they ship.

woh forgot bout this thread edi anyone wan second hand Lama helicopter ? RM 100 ......stil new... no time to fly

Looking for replacement blade.

is all the blade standard?

i'm looking for replacement blade for AH64 4-channel. A and B

i bought a imitation.. for rm200...

damn sad.. the damn thing not stable at all.......... once airborne... keep yawing to one side. and keep moving forward even if i never press anything on the controller...............

This post has been edited by fillet: May 30 2007, 04:57 PM

!!!! LAMA V3 or wat ?!?!? later Msn u !! =P RM100 quite interested if RM100

RC helli not a toy? a transport? hahah it is still a toy. but a dangerous one.

4 channel heli is quite stable one. just give some time to learn to tune it up

---

Added on September 2, 2007, 6:17 pmnot anymore after china get into this kind of business. ehehhehe

---

Added on September 2, 2007, 6:33 pmThe heli keep yawing a side is because the two rotor turning in difference speed. you need to adjust it to turn into same speed in order to make the heli stable. locate the "PROPORTIONAL" screw on the MIXER (RECEIVER), you need to turn the screw clockwise or anticlockwise to adjust it and please be gently. here is the step

1) adjust the PROPORTIONAL screw.
2) disconnect the heli power source and wait for few second then reconnect it back ( before do this make sure you remote control calibration nod is all adjust to center.)
3) slowly increase the speed of the two rotor blade and make sure they all starting to rotate at the same time. if one rotor blade start turning then the other one. readjust it until it equa.
4) try to fly it and if it still slowly rotate in the air. re-adjust again.

if you heli keep run forward by it self you need to adjust the shaft at the servo. what you need to do is :

1) put the heli on the group. locate the servo contolling the forward and backward.
2) you see a Bell link connecting between the servo and the Swashplate, i believe it is too long. make it shorter by taking it out and turning the Bell link Plastic section. do not turn too much, by turning too much it will fly backward all the time.
3) keep tring untill you your heli as stable as posible. and then adjust it from the remote controller to perfecting it.

happy flying.

---

Added on September 2, 2007, 6:34 pmhahah me too at the first time.

This post has been edited by MadCentury: Sep 2 2007, 06:34 PM

anyone here fly belt cp ?

wow, they say belt cp is a wild beast is it so?
Almost same like King2 , need to tame them first...

I have flown 5 type of rc heli. First one Apachee Ah-64 3D modified to 4D, very nice n stable but my daughter flew it into the sawah padi and lost.

Second one is 2D heli modified (just put some weight infront so it become almost 3D that can move forward) and easy to control if u really can understand your heli.

Third one 3D heli modified - hardly to control bcoz i think the receiver have the problem. Sumtime rotating even after switch off transmitter for sumtime.. at last smoking during flying and rest in grave.

Then i bought another 3D heli again to train my son. But still hardly to control.

The fifth one i bought Colco Cyclone Thunderbird 4D for RM280 from kemen marketting. They have spare part also. But until now still tuning the heli coz during training flight the stabilizer bar patah,... then i change it to steel bar but the bar bengkok. So still trying to tuning after trying a few bar.

those are little boy toys(i mean those pic on the 1st post)..grown up play big boy toys



This post has been edited by NewbieBetta: Dec 27 2007, 06:06 PM

Anyone can show their servo setup?help me,my bee still not stable need adjust the servo coz automatically will turn left =(

http://forum.lowyat.net/topic/597013

4-ch V3 Lama for sale

Tks

Can fly arr this thing??

yo bro, i just bought a v3 and having A LOT problem to how to balance it/ fly properly. its not balacnce right now.
anyway i do hav a question, does some small scrathed on the blade cause the imbalance flight too?


any experienced player live around cheras willing to share their experience to me face to face? XD

---

Added on January 4, 2008, 2:29 amactually i hav no idea wat to adjust, issit the main point to adjust is to make the upper properller speed same as lower speed?

This post has been edited by skylinegtr34: Jan 4 2008, 02:29 AM

scratches won't cause any problems. however, if parts of the blade have chipped off, then yes. but generally it is still able to fly if only tiny parts are chipped off due to crashes/collisions.

Hehe..I have some for sale..

Normally the servo control is selected using the screw type switch inside the gyro box. before flying the heli, set all the servo to zero. then you put some power and adjust the servo one by one. ie adjust the turning first so that your heli will not spinning while take off. after resolve that problem then you adjust another servo which is control the yaw of the heli which is cause the unballance left and rightof the heli. then goes for the third one. then after you can mAKE the heli harver (fly stable) then you can happily fly it ever after. Hope this will give a little help to you. anyway i m new also with this hobby.

are those stable though?
been playing and seeing ppl play.. not many of them stable except bigger ones

the screw type is gyro rite? that is to control the main blade and the tail blade so that it wont spin.

in ur case, i believe ur enctral shaft is not 90 degree setup. that is why it's going side ways. try to adjust with ur controller else, u have to screw/unscrew the "hand" that hold the shaft.

dun really know how to explain, but i hope u understand. haha

---

Added on January 10, 2008, 11:34 amwith proper setup(take times..........) it will be very easy east to fly... else u will found ur heli side ways.... spin... shaky and so one..

This post has been edited by areankim: Jan 10 2008, 11:34 AM

halo... i am newbies in RC heli... i'm now plan to buy a electric RC heli.. but dunnoe which 1 shud i buy..
can any1 giv me some opinion? LAMA V4/V3 is wat i heard suit for beginner.. is tat true? which 1 is better?
any other recommendation ? budget quite tight.. hehehe
thanq

newbies is always coxial 1st.

v3/v4 doesn't have much diffrent. go for a cheaper one if u wanan get serious... v3 then a 6 channel one.. then belt cp

nobody play small heli?

yaya.. i'm now thinking bout V3..hehe
coaxial?? means 3D? wat is the 3D n 4D? watz the direction means??

TQ

go for at least 4 channel.
v3/v4 good start

anyhow.. u will still need to go tru the setup process to make sure the hel is flight ready. altou.. it's RTF... often they fly unstable.

---

Added on January 12, 2008, 11:09 amthose IR? only can play indoor.. outdoor with sunlight cant play.....

This post has been edited by areankim: Jan 12 2008, 11:09 AM

ooo.. okok.. thanx for ur advice... TQ sifu

This post has been edited by edmondphang: Jan 12 2008, 11:16 AM

there are many sifu out there.... i'm only beginner

coaxial, mean 2 blades in front, got upper blade and lower blade, dual motor
its diff than those 6 channel only 1 blade in front and 1 blade behind, both are totally diff heli but newbies always start wit coaxial to feel the heli first

*im still wit coaxial - v3 lama, going to switch to BELT CP *

wow... belt cp... i wanted to buy also... but hai~~ worry that after i bought it d.. no time to play.. jst like my psp... e-sky robin and my 4 channel plane... not time, no place, no geng

wtf O.O XD
giv me your plane or sell me @ Rm 10 or more a bit laaa XD
anyway wuts your 4 channel plane?

Anybody know where to buy this heli sparepart? The blade is already broken. Thanks..

yea areankim, what's ur 4 channel plane? where do u stay? I fly in kajang.

Hello, i'm new in this hobby..just bought esky Belt CP. kinda regret didn't buy the beginer set first. 1st day of flying the heli lost balance resulting damage to my main gear and linkage

anybody stayed in bangi or kajang area? need sifu to guide me..help!

Omg ejat, you go straight to Belt CP ? Belt CP is a nightmare heli even for Experienced player, it need to modded and changed a lot of part before it can hover nicely, anyway i joining a gang flying @ Balakong, If you interested you can pm me and i'll tell you where is the exact place.

wah seriously? im thinkin of getting Belt CP as well.

then what 6-channel heli would you recommend for me? i've played with those co-axial 4-channel ones so far.

according to my sifu, belt-cp is very nightmare for 6channel newbies and its oso quite hard for those experience one, cos the stock settings are not stable and many parts like receiver/TX/Gyro/Servo nid to changed to better 1 in order to fly stable.

btw my heli ----> V3 Lama ---> Honey Bee King FP2 ---> Honey Bee King 2 (wishlist ) ---> Compy300 / Belt CP (wishlist too)

before i tot CP is easy to play coz its 450 class, but after my sifu and some of others owner of BELT CP i seen, now i noe how nightmare is belt CP , but its price and its size.. really tempting

This post has been edited by skylinegtr34: Feb 4 2008, 04:51 PM

i would suggest you to try Honey Bee king (FP2) 4 channel first.
first its not a coaxial anymore, for your infromation, coaxial and the 6 channel heli you are going to play is definately diff things, you cant learn anything from co-axial 4 channel to play those 6 channel ( Front blade n Behind blade one )
so Honey bee King FP2 , is suitable for pre-6 channels i think. just my 2 cents

io have a RC Heli that i just bought a week ago..i broke the blades on the second day XD..my Heli had some probs with the movement so it isnt stable and crashes lol..on my Heli Manual..it says the heli control has a virtual heli flying software that you can use on your computer..my Heli model is Lama or something like that...its the lenght of my keyboard..anybody can pm me a site that gives more information about RC heli please..

whuuuttt!!!! nightmare!!! before getting Belt, thinking of getting honey bee suddenly kene poison by my frenz coz he's taking Belt CP. like u said it's so tempting but, no worry, i'll try my best to tame it...thanks for sharing skylinegtr34..

anyway just discuss wit RC kakis frens today.

compare to others, Look like Belt CP is not a good choice for 450 class.
it come wit E-Sky TX wit price rm 700 which stated "RTF"
but after you change CNC rotor set, CNC head and other upgrades like FUTABA TX it cost like rm 1.5k to rm 2k.

for that $$ , A completed TREX cost like rm 2.5k. so its better to get TREX if you are serious in RC heli
btw Dont expect BELT CP stock setting can do you a 3d fly, sometimes Hover'ing a Stock Belt CP is a hard job too. Even for a experienced one.

so i'd to stick to class 300 first XD

---

Added on February 5, 2008, 12:12 amwhere do you stay? Mayb i can help you if its minor problem, but complicated problem you can visit to BTHO Flying site, lots of sifus here willing to help out.

Btw about that software, do you have a cable connect to PC? if you dont hav you can purchase 1 at around rm 30.
And software you have to donwload yourself, the most basic software and free one is FMS. google it out and download it, its free.


This post has been edited by skylinegtr34: Feb 5 2008, 12:12 AM

my helicopter not stable and keep going backwards when lifting off

acutally going forward/backwards oni? is settable, either set with your Transmitter. If transmitter set to maximum still going 1 side, you can adjust on the Helicopter.

anyone can give me a brief tutorial on how to do this?

so how do your heli slides? If front, u can adjust on the Remote slightly counter back with the moveable thing beside the stick.
same goes to Slide to right, left. Just counter them.

If you tried it even set to the max on your transmitter but still not enough to counter them, you can adjust the Linkage on the helicopter.

uhh..no idea what your talking about..im a noob...


use paint and tell me where to change
BTW my heli moves backwards

This post has been edited by frostfox: Feb 6 2008, 10:25 PM

hoping to buy heli r/c, got any idea which for beginners??

the guy recommended me lama V4 so it must be for begginers

if it goes backward alot it cant be adjusted on the radio.. u have to look at the swashplate... make sure it's 90 degree as possible.

To all newbie...Just to remember always counter your heli with your own finger not by transmitter! it took me 1 month and spent thousands of ringgit just to learn hovering skill. now i be able to do some mild 3D stuff ie: inverted and roll . keep it up...don't give up.
For those who are interested in RC heli, pls join us at bukit jeluong Funfly every sunday morning. withness the most keng RC heli 3D master in malaysia.

This post has been edited by kyoshooo: Feb 8 2008, 01:08 PM

where's bukit jeluong?

Bukit Jelutong-Shah Alam, Selangor. if u are from Penang, pls come to padang polo 2morow morning.

walao...in shah alam so far le..i went am-corp mall today to get new blades and to fix my lama V4..i also bought another Lama V4

UPDATE 30 mins later : OMG my heli crashedd...one of my heli the motor burn so 1 propeler cant move..the other heli the casing pecah abit

check out my helicopter pictures at http//:frostfox.info.tm .. click gallery andclick for enlarged size pictures

This post has been edited by frostfox: Feb 9 2008, 05:04 PM

where are you from Frostfox?

---

Added on February 10, 2008, 9:48 pmand yes All LAMA ( Co axial are good for beginners to learn orientations )

btw , according your LAMA v4 problem, goes backward ya?
ok about the trimmer how it works

did u see the little moveable thing beside the both joystick?
i dono whether your using Mode1 or mode2

most hobby shop selling Mode1 Transmitter,
Its Throttle and Aleron at right, Rudder and elevator at left. Ya?

so if your Heli is moving backward, That mean your Elevator is "too backward" , so set the Left side, Straight one "I" moveable stick to Front, slowly adjust until your heli stable.

Every Moveable stick shud put to Middle at the first time u play the heli, except Throttle one, its recommended to set to lowest.
and after adjust your moveable stick like what i said to achieve balance so u can release your hand and ur heli is still stable


BTW I JUST GOT MY NEW ESKYHONEY BEE TODAY WOOHARRRR
release hand 10-15 seconds still can maintain stable, wat a nice heli

---

Added on February 10, 2008, 9:50 pmbtw oso sorry for late reply coz CNY maaaaaa!!
HAPPY CHINESE NEW YEAR EVERYONE!!!

---

Added on February 10, 2008, 9:50 pmfor coaxial heli i think the 'counter by finger' is not needed most of the time since its toooo way stable unless your setting goes wrong,ya?
but for FP or CP class, yea u always nid to counter wit ur own finger, thats the FUN OF THE HELI yay! now i get bored wit my Lama

whats your heli?
your first Heli is 6-channel CP heli?
bravo

This post has been edited by skylinegtr34: Feb 10 2008, 09:52 PM

Btw anyone need this battery?

Im using other battery so i dont need this Honey Bee Battery, pm me if your interested
http://forum.lowyat.net/index.php?showtopic=628684

Hi everybody, im new to this also. Just learned to pilot an Apache AH64, 4 channel heli. The blades are already in a very sorry state due to countless craches during training. Eyeing on Esky Lama v4 or Blade CX2 for my next heli. There's a video of my Apache flight in Youtube. If u guys interested in watching it...here it is
http://www.youtube.com/watch?v=sgupowA71nY

This post has been edited by viosafc: Feb 11 2008, 12:41 AM

i highly recommended to get Esky if your thinking to get Lama, because esky spare part can be found easily in kl/selangor/any hobby shop.

btw, you should upgrade to FP or CP, coaxial is enuf. just 1 Coaxial is enuf, just my 2cent

im living in PJ..thats why very easy for me to go amcorp mall

---

Added on February 11, 2008, 9:52 pmi live in PJ..thats why its convinient for me to go amcorp mall

EDIT:sorry for double post..aciden

This post has been edited by frostfox: Feb 11 2008, 09:53 PM

so your heli problem fix?

yea..but it seems that everytime i fly my heli surely rosak or something happen T.T

fly in a flat and big land, after u master heli then u can fly in your house

hey guys, where do you all play? mind telling the time and place? i'm interested to come and have a look at how those 6-channel helis fly.

so far i've never seen one being flown personally before.

search on youtube..the cd that came along with your helicopter should have a video of some people flying

no. i mean in real life. i've seen many videos already and want to see them in real action.

go to competition and see lol..i think there are some every few months..although i don't know where and what competition

I fly in Cheras Bandar Tun Hussein Onn, you are welcomed to join us if your interested. there is a gang like 10-20+ ppl flying every Sunday Morning.
Pm me if you need more details.

why you guys all KL flyers?no PJ flyers?

i think there is a gang fly in Kota Damansara too.

For PJ heli flyers, please come to bukit jelutong. kota damansara not suitable for heli.

hi all experts,

i'm a beginner.. i've bought belt-cp past 2 months.. i've crashed twice.. first crashed i sent to repair and parts replacement that cost me about rm80..
2nd crashed was just the blade and mainshaft.. i've replaced the carbon fiber main bladees, mainshaft and feathering shaft by myself.. other parts seems ok so i just leave it..

now whenever i throttle from slow spinning my heli keep vibrating.. but when i throttle up to higher speed and heli start fyling it seems ok and stable..

anyone know what's the problem? do you guyz think cuase of unbalance main blade?

This post has been edited by lighter: Feb 21 2008, 02:30 PM

Could be...Pls check the main shaft and spindle shaft also.

hehe.... mind to tell me which is spindle shaft?

i knew a new shop selling quite full range of esky product in subang jaya ss15, they even have this technician doing tunning and trimming service.
price for part are aso quite competitive. check it out man

btw heard tat they r direct distributor of xtreme (hong kong product) which special made for modification and upgraded part of esky 4ch.

think is time 2 get my lama v4 an xtreme makeover