Using Firmware Version:3.0.0.4.376_2524
on asus rt-n66u

Hi asusmy,

Would like to check with you the problem im facing on my printer on share printer feature on ac-rt66u.
I connected my printer thru router usb port using canon mg5570. I seldom switch on my printer. Only switched it on when i need to use printing. I found out that the router detected the printer but in my pc network connected using lan cable showing my printer is in offline or grey out icon.
Therefore the solution im currently doing is to reboot the router so that the printer to be able to print and the icon is not grey out anymore after rebooting router.

This post has been edited by KIntos: Nov 4 2014, 09:17 AM

Sorry for late reply. Not offen logon forum.

1. I am using latest firmware(using auto update feature from router). Need to check it when back home.
2. I connect though 2.4GHz
3. Distance about 40M like that. small condo size. router at living hall. pc at room.
4. USB 3.0

Last two question I do run some test after saw your message.
5. When i check my wifi connection speed. always fix on 54Mbps. Then i uninstall and install again the driver. But the speed only increase abit to 74Mbps. The file transfer rate does increase after that. about 4-5MBps

Suspect my wifi card are the root causes for this problem. Now still fixing.

6. Single RMVB file about size 200MB.



Another question. My friend seek for a router for his shop.
Coz too many user using the wifi and caused the Unifi stock router hang. Any model recommended ?

This post has been edited by kenhirai83: Nov 4 2014, 03:17 PM

40m... monster condo.

u mean 40 ft?

@Asusmy


I have tried to download the latest firmware from Asus Website
then use the Lan Cable and turn off wifi connection to upgrade.

but it still prompt failure to update.

my router is : RT-N12HP

product id : RT-N12
current version : 3.0.0.4.374_430-g3a6d879
latest version : ASUS RT-N12HP B1Firmware version 3.0.0.4.376.2048


Do you know how to solve it?

Hi can the asus n14uhp support huawei k5150 and e3272 LTE usb modem ?

Haha. maybe 40ft more accurate. bad in space measurement.

hi asus tech, just wondering whether asus all in on print server for DSL-N12U can support windows 8.1? My printer is Canon PIXMA E600.

anybody knows how long the warranty took to finish repairing?

I also want to know the status for RT-N12HP support as well.

I went to Asus support page for the original RT-N12HP and it gave me missing page error each time. Even for Malaysia site, it display the firmware for the newer revision B1.

Has Asus officially discontinue support for the old RT-N12HP?

AsusWRT-Merlin 376.48 STABLE & AsusWRT-Merlin 376.48 STABLE Update 1 has been released.

Changelog:


Changelog:

Hello,

I just bought the RT-N12HP. Managed to get it connected to Unifi.

setup the Wifi. Had some issues in getting it to connect to devices. Had to reboot devices before able to connect to wifi.
Speed and connection is fluctuating.
Had already updated to the latest firmware.
Is there a special way to set the Wireless? This is really troublesome.

Tried reseating the Antennae again and rebooted the router. Now Wifi is not detected.

Reset the router a couple of times to see if it solved the issue but did not.

Hope you can help

@AsusMY,

I have my Unifi modem on the 1st floor and connected to my N56U router.
Port 1 of N56U is connected to a unmanaged network switch before going to 2nd router on the 2nd floor.

How should I setup my router to have vlan.600 on the 2nd router so that I can use hypptv upstairs.

1st floor router: ASUS N56U
2nd floor router: WR1043ND v1.8 Openwrt

You are not the only one having wifi problem with the RT-N12HP.

Quite a few people here seem to have the same problem.

I am fortunate to have bought the non-HP version, the RT-N12 D1.

I have absolutely no problem at all with wifi, with 12 simultaneous connections, upstairs and downstairs.

With QoS properly configured, it can support online gaming, youtubing, torrenting and web-surfing simultaneously without breaking a sweat.

Here is a snapshot of the system log showing the uptime that can be achieved with my router.

u bot new, do u know what model? a, b1, c...?

i have rtn12hp_b1, good with old firmware, updated to this new, also good, no problem:
ASUS RT-N12HP B1Firmware version 3.0.0.4.376.2048
http://www.asus.com/Networking/RTN12HP/HelpDesk_Download/
but it says it is for b1, so u chud check...

actually, there was no need for me to "set up" anything.
only 2 things to do:
.. correct unifi router id and password
.. after selecting ppoe, make sure u select the right special isp requirements, unifi home, see video:
https://www.youtube.com/watch?v=Y7VUBSFy_es

Yeah i bought new. Looks to be a B1.
Reading through the guides here it should have been straightforward but it seems that Wireless is not working properly. Just resetted for the third time and reconfigured. Same issue.

If all the wireless devices in your house is capable of wireless N, set the Wireless Mode to "N Only"
Then set the Channel bandwidth to "20MHz"
Lastly, set the Control Channel to a channel that is not used by your neighbours.

http://www.maketecheasier.com/find-best-wifi-channel/

This post has been edited by sHawTY: Nov 9 2014, 12:12 PM

Thanks for the tip. I will try and see if it works!

Hi Wayne_DareDevil,

This is maybe due to the different H/W version. Try the one from the link below.

http://www.asus.com/Networking/RTN12HP/HelpDesk_Download/

Thank you