You may manually change the AiMesh Node IP using the IP binding feature in the client list.
Check the AiMesh Node current IP address and go to the client list and search for the same IP address. Click the IP address and change the IP address that you want and then click Apply.
You may need to restart the node if the IP address didn't change after you apply the setting.
Maxis Fiber as primary Wan and TM Unifi ask secondary WAN using Ethernet LAN 1 port. For the secondary WAN where to configure Unifi internet VID. Unifi VID 500
I'm using NT-12HP and version 3.0.0.4.380.2943 firmware.
I can't connect to internet currently. Previously I called TM technicians for help. They suggest me to buy a new router because they said my current router is dying. After they hard reset my router, it worked fine back then. But after period of time, the problem returned.
I'm currently subscribing to Unifi 300Mbps (previously 100Mbps) because of Turbo Upgrade 2018. Can NT-12HP handle 300Mbps speed? If can't, is the speed causing long term damage to it?
This post has been edited by erik8lyt: Jan 20 2020, 11:58 AM
I'm using NT-12HP and version 3.0.0.4.380.2943 firmware. I can't connect to internet currently. Previously I called TM technicians for help. They suggest me to buy a new router because they said my current router is dying. After they hard reset my router, it worked fine back then. But after period of time, the problem returned. I'm currently subscribing to Unifi 300Mbps (previously 100Mbps) because of Turbo Upgrade 2018. Can NT-12HP handle 300Mbps speed? If can't, is the speed causing long term damage to it?
If i remember correctly....
Rtn12hp is rated 300mbps max for ethernet.
Wifi, it is a N router, 2.4ghz only, max 50mbps.
If u want better wifi, u need to upgrade to AC wifi, 5ghz, may get close to 300mbps, depends on what u buy.
Where can I send my ASUS router RT-AC86U to repair in Penang?
Bought from a seller who apparently imported it from China.
China set or the US set which sold in taobao? I was experienced it, since the US set is so called as the "foreign garbage" in China. I was bought the US set of RT-AC86U then spoil after 3 week of using. So there have no choice, either send back to the seller to replace another one or buy new one from local seller.
I rather choose to buy new one from shopee, either China or Malaysia set. As long as just keep avoid to buy the used US set from Taobao. So now the US set that I bought from taobao was considered as malfunctioned. It can still light up but keep restart every 2 seconds and I totally can't log in to the router because it is malfunctioning.
If you really worried about the router get spoil. Make sure you have to buy a new sealed set, don't care you buy China set or local set. Then attach fans at the behind of this router. I got a china set of RT-AC86U which bought from tmall previously and was start using it since October 2018. It was still running well in good condition because I use fans to keep blowing the router to avoid it get overheat. So now I have threw the US set RT-AC86U. I bought another new china set again from shopee to set it as aimesh node. Also attach a fan to keep blowing at the behind of the router.
This post has been edited by junclj: Jan 22 2020, 10:29 AM
Hi, I have the latest firmware , and i have also chosen the correct Maxis under special requirement from iSP. username and password for the maxis fiber is also input correctly. But I keep getting in stable internet connection, 2.4g & 5g can’t getting very bad internet speed most of time 1m upload speed. If I setup AP mode as the maxis stock router as primary. Pls help, THANKS
Hi, I have the latest firmware , and i have also chosen the correct Maxis under special requirement from iSP. username and password for the maxis fiber is also input correctly. But I keep getting in stable internet connection, 2.4g & 5g can’t getting very bad internet speed most of time 1m upload speed. If I setup AP mode as the maxis stock router as primary. Pls help, THANKS
Hi, I have the latest firmware , and i have also chosen the correct Maxis under special requirement from iSP. username and password for the maxis fiber is also input correctly. But I keep getting in stable internet connection, 2.4g & 5g can’t getting very bad internet speed most of time 1m upload speed. If I setup AP mode as the maxis stock router as primary. Pls help, THANKS
Which model of router are you using? RT-AC68U?? Do you have such problem previously? Or is it a newly bought router? Have you tried to give it a Factory Reset?
China set or the US set which sold in taobao? I was experienced it, since the US set is so called as the "foreign garbage" in China. I was bought the US set of RT-AC86U then spoil after 3 week of using. So there have no choice, either send back to the seller to replace another one or buy new one from local seller.
I rather choose to buy new one from shopee, either China or Malaysia set. As long as just keep avoid to buy the used US set from Taobao. So now the US set that I bought from taobao was considered as malfunctioned. It can still light up but keep restart every 2 seconds and I totally can't log in to the router because it is malfunctioning.
If you really worried about the router get spoil. Make sure you have to buy a new sealed set, don't care you buy China set or local set. Then attach fans at the behind of this router. I got a china set of RT-AC86U which bought from tmall previously and was start using it since October 2018. It was still running well in good condition because I use fans to keep blowing the router to avoid it get overheat. So now I have threw the US set RT-AC86U. I bought another new china set again from shopee to set it as aimesh node. Also attach a fan to keep blowing at the behind of the router.
I am interested to buy over your faulty Ac86u for my own experiment purpose. Do you still need it? Or else I think I might able to buy and play around with it. But I have limited budget also.. 😅
This post has been edited by mztang52: Jan 22 2020, 04:06 PM
Jan 16 2020, 04:04 PM
Quote
0.0271sec
0.70
6 queries
GZIP Disabled