Unifi Official TM UniFi High Speed Broadband Thread V36, READ 1ST PAGE FOR TURBO SPEED INFO!
|
|
 Nov 12 2018, 02:33 PM
|
 
Junior Member
90 posts Joined: Aug 2012  
|
I received upgrade notice awhile ago but never bother to test it out... after all, I am not heavy users, 10mbps even sufficient for me
 ... but one thing i noticed was, the support seem to get downgraded  ... in my 3rd day without phone & internet now and still not receiving call/sms from them after the last sms when i done making complaint: "We're trying to resolve your report within the next working days blah blah"... 1st few months using unifi i always received call from technical team after report made within hours but now  ... |
|
|
|
|
|
Nov 12 2018, 02:58 PM
|
All Stars
14,908 posts Joined: Jul 2005 
|
QUOTE(Pegasus88 @ Nov 12 2018, 02:24 PM) Just curious to know a little bit more, you mean TM is not ready for IPv6 ? "Unstable" is the correct word |
|
|
Nov 12 2018, 03:02 PM
|
Senior Member
5,714 posts Joined: Mar 2007 
|
QUOTE(Pegasus88 @ Nov 12 2018, 02:24 PM) Oh! ok will do. Thanks for your advise They are ready, but it is not optimized the way it should be. Just curious to know a little bit more, you mean TM is not ready for IPv6 ?  |
|
|
Nov 12 2018, 03:03 PM
|
Junior Member
183 posts Joined: Sep 2009 From: Petaling Jaya, Malaysia
|
Just got upgraded from 100mbps to 800 mbps.
Hardware spec as below : Huawei HG8240w Asus RT-AC55UHP Tested on wired connection Cat 5e, Hitting max 350 MBPS Tested on Wifi @ 5 ghz 1 meter from Router. Hitting max speed approx 290 - 300 MBPS. Not sure if this is due to cable issue. Just ordered Ugreen Cat 6 cable.. will test it out and update here.. btw, do you guys think it could be cable or my BTU or router ? Router i used to have QOS enabled.. matching my previous 100mbps speed. So disabled QOS now. is NAT should be enabled or not ? |
|
|
Nov 12 2018, 03:06 PM
|
|
Senior Member
5,714 posts Joined: Mar 2007
|
QUOTE(cybercrew @ Nov 12 2018, 03:03 PM) Just got upgraded from 100mbps to 800 mbps. Your router does not support 800Mbps both on wired and wireless. Wired, probably yes, and that will need a new beta firmware available from the Asus Malaysia thread somewhere, but definitely NOT on wireless. See 1st page, 1st post, green page, for list of compatible routers. You need at least the Asus RT-AC86U. NAT should be enabled, unless you are on IPv6, otherwise, you won't be able to go online.Hardware spec as below : Huawei HG8240w Asus RT-AC55UHP Tested on wired connection Cat 5e, Hitting max 350 MBPS Tested on Wifi @ 5 ghz 1 meter from Router. Hitting max speed approx 290 - 300 MBPS. Not sure if this is due to cable issue. Just ordered Ugreen Cat 6 cable.. will test it out and update here.. btw, do you guys think it could be cable or my BTU or router ? Router i used to have QOS enabled.. matching my previous 100mbps speed. So disabled QOS now. is NAT should be enabled or not ? |
|
|
Nov 12 2018, 03:06 PM
|
All Stars
24,453 posts Joined: Nov 2010
|
QUOTE(cybercrew @ Nov 12 2018, 03:03 PM) Just got upgraded from 100mbps to 800 mbps. 1. what device u use to test?Hardware spec as below : Huawei HG8240w Asus RT-AC55UHP Tested on wired connection Cat 5e, Hitting max 350 MBPS Tested on Wifi @ 5 ghz 1 meter from Router. Hitting max speed approx 290 - 300 MBPS. Not sure if this is due to cable issue. Just ordered Ugreen Cat 6 cable.. will test it out and update here.. btw, do you guys think it could be cable or my BTU or router ? Router i used to have QOS enabled.. matching my previous 100mbps speed. So disabled QOS now. is NAT should be enabled or not ? 2. what app u use to test? |
|
|
|
|
|
Nov 12 2018, 03:09 PM
|
|
Junior Member
183 posts Joined: Sep 2009 From: Petaling Jaya, Malaysia
|
QUOTE(AVFAN @ Nov 12 2018, 03:06 PM) 1. what device u use to test? my desktop wired Gigabit lan port.2. what app u use to test? iphone 6s plus and ipad for wifi speedtest.net via web This post has been edited by cybercrew: Nov 12 2018, 03:09 PM |
|
|
Nov 12 2018, 03:21 PM
|
|
All Stars
24,453 posts Joined: Nov 2010
|
QUOTE(cybercrew @ Nov 12 2018, 03:09 PM) my desktop wired Gigabit lan port. for LAN, is your desktop gigabit too?iphone 6s plus and ipad for wifi speedtest.net via web for wifi, u need a better router to get higher speed. if not, 300 is about all u can get. read page 1 and the wifi thread, answers r there. yr question comes out TWICE every day in LYN! |
|
|
Nov 12 2018, 03:39 PM
|
Senior Member
3,669 posts Joined: Apr 2006
|
QUOTE(cybercrew @ Nov 12 2018, 03:03 PM) Just got upgraded from 100mbps to 800 mbps. 350Mbps even with QOS disabled with AC55UHP? Current firmware has issue with NAT acceleration. Please use beta firmware posted by Asus Representative below.Hardware spec as below : Huawei HG8240w Asus RT-AC55UHP Tested on wired connection Cat 5e, Hitting max 350 MBPS Tested on Wifi @ 5 ghz 1 meter from Router. Hitting max speed approx 290 - 300 MBPS. Not sure if this is due to cable issue. Just ordered Ugreen Cat 6 cable.. will test it out and update here.. btw, do you guys think it could be cable or my BTU or router ? Router i used to have QOS enabled.. matching my previous 100mbps speed. So disabled QOS now. is NAT should be enabled or not ? https://forum.lowyat.net/index.php?showtopi...post&p=90551212 QUOTE(ASUSmy @ Oct 11 2018, 10:27 AM) Hi All, For those who are using RT-AC58U or RT-AC55UHP router and have trouble getting the high speed using LAN, you can try updating the beta firmware below. Do let me know is you have any problem with the firmware. https://www.asuswebstorage.com/navigate/s/B...8A1EEFE35D1B98Y |
|
|
Nov 12 2018, 03:42 PM
|
|
Junior Member
183 posts Joined: Sep 2009 From: Petaling Jaya, Malaysia
|
QUOTE(SilentVampire @ Nov 12 2018, 03:06 PM) Your router does not support 800Mbps both on wired and wireless. Wired, probably yes, and that will need a new beta firmware available from the Asus Malaysia thread somewhere, but definitely NOT on wireless. See 1st page, 1st post, green page, for list of compatible routers. You need at least the Asus RT-AC86U. NAT should be enabled, unless you are on IPv6, otherwise, you won't be able to go online. thanks buddy.. upgraded ther firmware and now its reaching 570 mbps on wired..So to enjoy full speed i need to upgrade my router right ? |
|
|
Nov 12 2018, 03:47 PM
|
|
Senior Member
3,669 posts Joined: Apr 2006
|
QUOTE(cybercrew @ Nov 12 2018, 03:42 PM) thanks buddy.. upgraded ther firmware and now its reaching 570 mbps on wired.. Good. Now then.....570Mbps on wired after upgrading firmware?So to enjoy full speed i need to upgrade my router right ? Must be SPECTRE microcode problem.  Please search around about this. |
|
|
Nov 12 2018, 03:47 PM
|
Junior Member
189 posts Joined: Dec 2010
|
shot ver: my Alcatel Lucent I-240G-P went kaput so I contact TM to replace it.
Got the Nokia G240G-E modem which is nice aesthetically, and was able to snap my ONU pass. But too bad because the login pass for the GPON (which is now SFU) interface is "random numbers" RIP |
|
|
Nov 12 2018, 03:53 PM
|
|
Senior Member
3,032 posts Joined: Dec 2011
|
QUOTE(dickybird @ Nov 12 2018, 01:59 PM) Bertenang, don't so fast take the bait! For all the aggravation we'd had to endure the last few months, it should be free! Yeah it should be free. And of cos I'll ask them if there any contract renewal first, if yes I'll reject, or else just take it. |
|
|
|
|
|
Nov 12 2018, 04:00 PM
|
|
Senior Member
1,126 posts Joined: Jan 2003
|
Guys,
still no news or notification about my unifi when will get turbo to 300mbps. Now I really tempted to go TM point to change the plan to 100mbps and pay RM129 monthly instead of current RM170. any other point of view? my existing unifi contract only expire on Mar-19 |
|
|
Nov 12 2018, 04:01 PM
|
|
Junior Member
342 posts Joined: Dec 2014
|
anyone here still under contract from tm and managed to downgraded from 800 mbps to 100 mbps ??
|
|
|
Nov 12 2018, 04:06 PM
|
Junior Member
460 posts Joined: Jun 2012
|
QUOTE(taqu @ Nov 12 2018, 12:33 PM) Probably enough, depending on which Pi model. Pi 3 B+ consumes almost 3W under load, while most HDDs consume 2-2.7W. QUOTE(lol4291 @ Nov 12 2018, 01:32 PM) Are there 2nd Raspberry Pis? I've looked for a few before, but there's barely price difference between selling used and new. Well for my upcoming Pi-Hole mini project, these components I will use:Are you planning to power the Pi via the USB port on AC1200? It could work i suppose. AC1200 is USB 2.0, so, should be able to deliver a max of 500mA [according to standard spec]. Rpis power consumption table here. EDIT: I did some searching. It may or may not work, ymmv. These links are old but there's some info there. Link 1. Link 2. Link 3. I'm not sure if there's a local steam cache setup for a community or the like. But a while back, I found this. 1. Raspberry Pi Zero (w/o Wifi) 2. ENC28J60 10Mbps Network Adapter Module According to this site, Raspberry Pi Zero (w/o Wifi) has the lowest power consumption among all Pi's. So hopefully it shouldn't be any problem when supplying from USB port from the back of the router. Bonus, a Reddit user post his setup with display which power supplied from TP-LINK router. Link: https://old.reddit.com/r/pihole/comments/9k...y_to_my_pihole/ 
Wish me luck!  This post has been edited by MrSpeedy: Nov 12 2018, 04:08 PM |
|
|
Nov 12 2018, 04:23 PM
|
Junior Member
554 posts Joined: Nov 2006
|
QUOTE(woeikang @ Nov 12 2018, 11:11 AM) mine were still aneka plan even upgraded during the 2017 campaign. wanted to know who were ultimate package since 2017 campaign. so that i can get prove and show to TM. which i could entitle for ultimate plan. Mine is Ruby Pack + Ultimate Pack. Just like you, got the Ultimate package on 2017 campaign. Just got my ruby pack cancelled recently. I got MCMC involved in order to get the ruby pack cancelled. |
|
|
Nov 12 2018, 04:39 PM
|
|
Junior Member
243 posts Joined: Feb 2011
|
QUOTE(cybercrew @ Nov 12 2018, 03:03 PM) Just got upgraded from 100mbps to 800 mbps. How much u pay?Hardware spec as below : Huawei HG8240w Asus RT-AC55UHP Tested on wired connection Cat 5e, Hitting max 350 MBPS Tested on Wifi @ 5 ghz 1 meter from Router. Hitting max speed approx 290 - 300 MBPS. Not sure if this is due to cable issue. Just ordered Ugreen Cat 6 cable.. will test it out and update here.. btw, do you guys think it could be cable or my BTU or router ? Router i used to have QOS enabled.. matching my previous 100mbps speed. So disabled QOS now. is NAT should be enabled or not ? |
|
|
Nov 12 2018, 04:51 PM
|
Senior Member
2,113 posts Joined: Jan 2003 From: Cheras 
|
QUOTE(pokchik @ Nov 12 2018, 10:11 AM) Q : with 10Mbps/1.25MBps before this, did you get maxed out to the dload speed to 1.xMBps? seem like some of the people here are facing this. I even raise this complain but when tmnet reset my connection it will back to normal for a while before it start to throttle the speed. I just cant get full 12.5 download speed last time after downgrade last month. tested the speed by downloading video driver or ubuntu anyhow. |
|
|
Nov 12 2018, 05:00 PM
|
|
Junior Member
183 posts Joined: Sep 2009 From: Petaling Jaya, Malaysia
|
QUOTE(winyap991 @ Nov 12 2018, 04:39 PM) How much u pay? RM189 without SST |
|
Topic ClosedOptions
|
| Change to: |  0.0190sec
 0.48
 6 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 05:46 PM |
Quote