My unifi account was created today and i changed the netis router to Asus AX56U immediately after TM configured and confirmed the speed is up to 300Mbps

I followed the configuration guide from blacktubi Asus Unifi, except the unifi plus box won't active when connected to lan4. It worked well under AX56U lan3. But i have a weird problem which AX56U will has red light on Internet LED. It happened a few times but it will turn back to normal after a while. Does anyone encounter this issue and got solution?

LAN4 for old UNIFI device    I just changed my router 2days ago to Asus AX56U and don't find any issues. I'm not sure if your network cable from the modem to router could be an issue. I'm using CAT6 LAN cable and so far no issues for past few days.

Switch to unifi business profile then lan 4 would work like Normal Ethernet port

As what you mean, my lan4 can't use if router configured as unifi home?

As what you mean, my lan4 can't use if router configured as unifi home?

LAN 4 for IPTV if you're using Unifi Home 

LAN 4 for IPTV if you're using Unifi Home 

Lan 4 will be for the old Unifi TV box(old Unifi TV box uses Vlan) if you are using unifi home

I'm new subscriber unifi 300Mbps that comes with unifi plus tv
And i configured AX56U using unifi home, then lan4 can't detect unifi plus tv. So i plugged into lan3 and it worked.
I haven't test the lan4 of unifi home profile whether can work on other device like laptop or nas

So lan4 under unifi home profile only for IPTV (old version), can't work on unifi plus tv?

Is RT-AX88U officially available in Malaysia?

https://www.asus.com/my/Networking/RT-AX88U/

unifi plus box using 'normal' internet..
the old unifi box are using dedicated vlan at port 4.

https://www.lazada.com.my/products/asus-rt-...s691831492.html

Been here for a really long time.

Oh, means no need vlan tagging on port 4? No wonder it can't detected on lan4 if configured unifi home profile. Then i should configure unifi business and connect the plus tv to lan4. I don't want to lose one ethernet port instead

Goodbye ASUS. I'm leaving you for AmpliFi Alien

FYI - Yes it does support VLAN tagging

Have a
Rt ac86u Router

Just installed time today
The given router are able to access the internet with wireless/lan

I changed to my own AC86U
input the pppoe username + password (correct info)
Everything filled but still no internet for both wireless/lan

How? Firmware latest

Please double check your PPPoe username n password is correct,
or reconfirm the details with Time customer service.

I have no problem at all to setup connection every time I factory reset my ac86u after upgrade firmware.
TIME no need vlan tag, so if PPPoe username n password is correct, surely have connection.

Checked
I even copied the username and pw from the default router
Guess i might need to try Freset it
Thanks!

May i know your firmware version?

Latest firmware as at July 2020 oh. so awkward.
Ya you try to factory reset it and start over again? I have no problem