Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
5 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

 -+♦+- LYN PROTON PERSONA CLUB V21 -+♦+-

views
     
TSxandras
post Jul 26 2011, 12:19 AM, updated 15y ago

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



LYN Official Proton Persona Owners Club and support thread V21!!

PPLYNC

Persona celebrating TWENTY-ONE threads of awesomeness!!

user posted image

IMPORTANT ANNOUNCEMENT!!


TO ALL FELLOW PPLYNC MEMBERS WHO ARE DRIVING PERSONA ELEGANCE:

If you have ever experienced sounds (tak tak tak tak tak) coming from your engine during cold start in the morning, then it MAY BE one of the infamous Proton's manufacturing defect: the IAFM problem. IAFM noise is most noticeable during cold start, and you may hear the frequency of the noise going up or down depending on the RPM that the engine is running at. The noise is identical to a diesel truck or lorry's engine idling noise. Once the engine has warmed up, the noise will become softer or totally eliminated. This is because the plastic components on one of the valves on IAFM expands with heat. Below is a video of a member's car with IAFM problem.



So far the problems that may be associated with IAFM noise are nothing major, but in certain cases it may cause severe throttle lag, and the noise may get louder over time. Some owners have even experienced increase in fuel consumption and bad engine response.

If you visit the service centre and the mechanic or service attendant tells you that the noise is not caused by IAFM as our Persona Elegance comes with new batch of IAFM modules, DO NOT believe what they said.

You may:
1.) Ask them to diagnose and tell you what exactly is the problem since they insisted that it's not IAFM module noise.
2.) If the mechanics at CoSE tell you that the noise is not caused by IAFM, go to a few different SCs, have them to check your IAFM module for imperfections on the valve, then get them to write a report each. Compile these reports & bring it to CoSE's customer service and file a complaint, give it to their higher authority.

Now, do remember that they may not be able to figure the noise out if you send your car to SC as the engine has already warmed up. Park your car and leave it there for an hour or so for the engine to cool down, then get the service attendant or mechanic to listen to the noise as you start the engine.

Again, I would like to stress on this main point as I've experienced this myself and wasted almost a month plus before sending it to a different SC just to have the noise diagnosed as IAFM problem; If the guys at CoSE tells you that it's not IAFM problem but your guts and 13 other SCs tell u that it is, then it IS IAFM problem. In my case they never even bothered to check as the engine has already warmed up and the sound was gone by the time the mechanic laid his hands on my car.

This serves as an important announcement to all Persona Elegance (PE) owners as to not overlook this small issue that may lead to greater problems in the future. The price of IAFM modules has dropped since year 2009 (from RM 1200+ in late 2008 to RM 2xx in 2011) because of the frequency of Campro IAFM engines having this problem. Still, it's our right to claim the IAFM modules as they are covered under warranty and malfunctioned units are manufacturing defects. We should not wait till the warranty period is over and then pay them RM300+ including labour to fix a defect that is there from day 1 of ownership of the car itself.

I hope all the Persona Elegance owners out there take note of this issue and do not keep an eye closed.

Salam 1 Malaysia, & Harap Maklum.

Photos From Recent TTs
TT 4.0 - Genting Highlands.
» Click to show Spoiler - click again to hide... «

Studio shots of the New Persona Elegance (PE)
» Click to show Spoiler - click again to hide... «


Proton Persona Promotional Video
» Click to show Spoiler - click again to hide... «


Previous Threads V1-V18.88
» Click to show Spoiler - click again to hide... «


Proudly a Proton Persona Owner
» Click to show Spoiler - click again to hide... «


251 Members and Growing!!! Mega TT will be fun if all 251 Members show up!!

For those who just received their Persona, Congratulations & Welcome to PPLYNC!! Please PM ME or POST in this thread stating that u are a new owner to update you name into the list.


Car Service & Preventive Maintenance Schedule and Pricing
» Click to show Spoiler - click again to hide... «


Price of Proton Parts
Proton Parts Cost

Recommended SC

1)Serdang SC - http://worldcarcare.com.my/WorldCarCare.html
Reasons: Best customer service in all reviews, allows you to bring own lube.

2) CoSE (beside Kesas) - Head towards Klang on Kesas and you will pass by the biggest Proton billboard you'll ever see. Thats the place.
Proton Center of Excellence (CoSE),
Jalan TP 5, Taman Perindustrian Sime Uep, 47600 Subang Jaya, Selangor, Malaysia
Tel: 03-80269333
Tel2: 03-80269167
Fax: 03-80269155
HQ, easy to claim warranty and reflash ECU. Have to make appointment b4 going there. Can bring own Lube

3) Juru SC (Penang) - Can bring own lube.

4) Trend point - Along Jalan Tun Razak. (Still under review, first review was bad, but a warranty claim experience after that shows that they're quite efficient and able to detect problems that even CoSE denies.)

Unrecommended SC (TRY TO AVOID AT ALL COST!)

1) Sin Siang Hin sdn. bhd. at genting klang n gombak - bad service and they whack ur car like they pay for petrol
2) Senaxis Sdn Bhd No. 50, Jalan SS26/ 11, Taman Mayang Jaya, Petaling Jaya, 47301 SELANGOR Tel: 012-3283123 Fax: 03-78048753

Member's Review:
» Click to show Spoiler - click again to hide... «


Common Problem in Persona
» Click to show Spoiler - click again to hide... «


Tips for Persona Users (To be Updated)
» Click to show Spoiler - click again to hide... «

*


This post has been edited by xandras: Aug 7 2011, 02:32 PM
Dav6534
post Jul 26 2011, 12:34 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 12:19 AM)
LYN Official Proton Persona Owners Club and support thread V21!!

PPLYNC

Persona celebrating TWENTY-ONE threads of awesomeness!!

user posted image

IMPORTANT ANNOUNCEMENT!!


TO ALL FELLOW PPLYNC MEMBERS WHO ARE DRIVING PERSONA ELEGANCE:

If you have ever experienced sounds (tak tak tak tak tak) coming from your engine during cold start in the morning, then it MAY BE one of the infamous Proton's manufacturing defect: the IAFM problem. IAFM noise is most noticeable during cold start, and you may hear the frequency of the noise going up or down depending on the RPM that the engine is running at. The noise is identical to a diesel truck or lorry's engine idling noise. Once the engine has warmed up, the noise will become softer or totally eliminated. This is because the plastic components on one of the valves on IAFM expands with heat. Below is a video of a member's car with IAFM problem.



So far the problems that may be associated with IAFM noise are nothing major, but in certain cases it may cause severe throttle lag, and the noise may get louder over time. Some owners have even experienced increase in fuel consumption and bad engine response.

If you visit the service centre and the mechanic or service attendant tells you that the noise is not caused by IAFM as our Persona Elegance comes with new batch of IAFM modules, DO NOT believe what they said.

You may:
1.) Ask them to diagnose and tell you what exactly is the problem since they insisted that it's not IAFM module noise.
2.) If the mechanics at CoSE tell you that the noise is not caused by IAFM, go to a few different SCs, have them to check your IAFM module for imperfections on the valve, then get them to write a report each. Compile these reports & bring it to CoSE's customer service and file a complaint, give it to their higher authority.

Now, do remember that they may not be able to figure the noise out if you send your car to SC as the engine has already warmed up. Park your car and leave it there for an hour or so for the engine to cool down, then get the service attendant or mechanic to listen to the noise as you start the engine.

Again, I would like to stress on this main point as I've experienced this myself and wasted almost a month plus before sending it to a different SC just to have the noise diagnosed as IAFM problem; If the guys at CoSE tells you that it's not IAFM problem but your guts and 13 other SCs tell u that it is, then it IS IAFM problem. In my case they never even bothered to check as the engine has already warmed up and the sound was gone by the time the mechanic laid his hands on my car.

This serves as an important announcement to all Persona Elegance (PE) owners as to not overlook this small issue that may lead to greater problems in the future. The price of IAFM modules has dropped since year 2009 (from RM 1200+ in late 2008 to RM 2xx in 2011) because of the frequency of Campro IAFM engines having this problem. Still, it's our right to claim the IAFM modules as they are covered under warranty and malfunctioned units are manufacturing defects. We should not wait till the warranty period is over and then pay them RM300+ including labour to fix a defect that is there from day 1 of ownership of the car itself.

I hope all the Persona Elegance owners out there take note of this issue and do not keep an eye closed.

Salam 1 Malaysia, & Harap Maklum.

Photos From Recent TTs
TT 4.0 - Genting Highlands.
» Click to show Spoiler - click again to hide... «

Studio shots of the New Persona Elegance (PE)
» Click to show Spoiler - click again to hide... «


Proton Persona Promotional Video
» Click to show Spoiler - click again to hide... «


Previous Threads V1-V18.88
» Click to show Spoiler - click again to hide... «


Proudly a Proton Persona Owner
» Click to show Spoiler - click again to hide... «


246 Members and Growing!!! Mega TT will be fun if all 246 Members show up!!

For those who just received their Persona, Congratulations & Welcome to PPLYNC!! Please PM ME or POST in this thread stating that u are a new owner to update you name into the list.


Car Service & Preventive Maintenance Schedule and Pricing
» Click to show Spoiler - click again to hide... «


Price of Proton Parts
Proton Parts Cost

Recommended SC

1)Serdang SC - http://worldcarcare.com.my/WorldCarCare.html
Reasons: Best customer service in all reviews, allows you to bring own lube.

2) CoSE (beside Kesas) - Head towards Klang on Kesas and you will pass by the biggest Proton billboard you'll ever see. Thats the place.
Proton Center of Excellence (CoSE),
Jalan TP 5, Taman Perindustrian Sime Uep, 47600 Subang Jaya, Selangor, Malaysia
Tel: 03-80269333
Tel2: 03-80269167
Fax: 03-80269155
HQ, easy to claim warranty and reflash ECU. Have to make appointment b4 going there. Can bring own Lube

3) Juru SC (Penang) - Can bring own lube.

4) Trend point - Along Jalan Tun Razak. (Still under review, first review was bad, but a warranty claim experience after that shows that they're quite efficient and able to detect problems that even CoSE denies.)

Unrecommended SC (TRY TO AVOID AT ALL COST!)

1) Sin Siang Hin sdn. bhd. at genting klang n gombak - bad service and they whack ur car like they pay for petrol
2) Senaxis Sdn Bhd No. 50, Jalan SS26/ 11, Taman Mayang Jaya, Petaling Jaya, 47301 SELANGOR Tel: 012-3283123 Fax: 03-78048753

Member's Review:
» Click to show Spoiler - click again to hide... «


Common Problem in Persona
» Click to show Spoiler - click again to hide... «


Tips for Persona Users (To be Updated)
» Click to show Spoiler - click again to hide... «

*

*
First~~ woohoo
jasonloh7906
post Jul 26 2011, 12:34 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


wohoo!!!!!2nd pulak after seeing that fella above my head ~~lol sweat.gif

This post has been edited by jasonloh7906: Jul 26 2011, 12:38 AM
Dav6534
post Jul 26 2011, 12:35 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
Congrats on V21!!! =D
TSxandras
post Jul 26 2011, 12:36 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 26 2011, 12:34 AM)
First~~ woohoo
*
Woi.. No need to quote the whole thing la rclxub.gif

QUOTE(jasonloh7906 @ Jul 26 2011, 12:34 AM)
wohoo!!!!!1st!!!
*
Haha phail!! xD
raimy_m9
post Jul 26 2011, 12:36 AM

Getting Started
**
Junior Member
174 posts

Joined: Jun 2009
QUOTE(jasonloh7906 @ Jul 26 2011, 12:30 AM)
i drive at 70km/h get better fc than 80km/h XD. not big difference in speed actually.
*
i heard somewhere that to get the most efficient engine and fc is to drive up to your max engine torque..is it true?
Dav6534
post Jul 26 2011, 12:37 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 12:36 AM)
Woi.. No need to quote the whole thing la rclxub.gif
Haha phail!! xD
*
haha. i wanna make the page longer ma. XD
dorinyeah
post Jul 26 2011, 12:37 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 26 2011, 12:17 AM)
wub.gif Wipe ur saliva off man... laugh.gif
*
hehe... no need wipe... i got my own ckt...

QUOTE(xandras @ Jul 26 2011, 12:33 AM)
sweat.gif I'm broke again man because of the itchiness to park my geoduck.. 1st nite G Hotel, 2nd nite Hard Rock Batu Ferringhi,  3rd nite Golden Sands also Batu Ferringhi.. Total spent RM 1.3k plus.. doh.gif What a damn unforgettable way to spend RM 1.3k laugh.gif


Added on July 26, 2011, 12:34 amV21 is here!! Click the link below!!

PPLYN V21
*
fu... damn kns rich!!

ready to vomit Blood...

jasonloh7906
post Jul 26 2011, 12:38 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


@xan...spend 1.3k for unforgetable nite is worth lah~~hahahaha~~lucky i dun have to spend tat amount of money~~
@zeng...wat do u mean is done right??
TSxandras
post Jul 26 2011, 12:39 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(raimy_m9 @ Jul 26 2011, 12:36 AM)
i heard somewhere that to get the most efficient engine and fc is to drive up to your max engine torque..is it true?
*
blink.gif who said so?

QUOTE(Dav6534 @ Jul 26 2011, 12:37 AM)
haha. i wanna make the page longer ma. XD
*
Zzz.. Edit lo.. Scroll till finger pain xD

QUOTE(dorinyeah @ Jul 26 2011, 12:37 AM)
hehe... no need wipe... i got my own ckt...
fu... damn kns rich!!

ready to vomit Blood...

*
Zeng paid for my 1st stay at G Hotel brows.gif
jasonloh7906
post Jul 26 2011, 12:39 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(raimy_m9 @ Jul 26 2011, 12:36 AM)
i heard somewhere that to get the most efficient engine and fc is to drive up to your max engine torque..is it true?
*
then we need to rev till 4k@@
dorinyeah
post Jul 26 2011, 12:39 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(jasonloh7906 @ Jul 26 2011, 12:38 AM)
@xan...spend 1.3k for unforgetable nite is worth lah~~hahahaha~~lucky i dun have to spend tat amount of money~~
@zeng...wat do u mean is done right??
*
jason, ur car got angel ring? or just change white bulb?
Dav6534
post Jul 26 2011, 12:41 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 12:39 AM)
blink.gif who said so?
Zzz.. Edit lo.. Scroll till finger pain xD
Zeng paid for my 1st stay at G Hotel brows.gif
*
eleh...buy good quality razer mouse ma wont scroll till finger pain dy lo. or is your finger pain after staying in penang for 4 days? oops. tongue.gif
TSxandras
post Jul 26 2011, 12:41 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 26 2011, 12:38 AM)
@xan...spend 1.3k for unforgetable nite is worth lah~~hahahaha~~lucky i dun have to spend tat amount of money~~
@zeng...wat do u mean is done right??
*
brows.gif Not 1 nite mah.. 3 nites.. So quite ok lah.. brows.gif

Wat zeng meant is the overall of the TC.. Correct boost level with correct ECU tuning, etc etc will generally make it more reliable while gaining optimum power.. But not many TC sifus out there can do this la..
jasonloh7906
post Jul 26 2011, 12:41 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(dorinyeah @ Jul 26 2011, 12:39 AM)
jason, ur car got angel ring? or just change white bulb?
*
use t10 13xled smd. if u get the 28xled one lagi bright i think. actually i wanna change to projector one. but cost RM600. so i wait lor. wait got money 1st. like this cheap XD
TSxandras
post Jul 26 2011, 12:42 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 26 2011, 12:41 AM)
eleh...buy good quality razer mouse ma wont scroll till finger pain dy lo. or is your finger pain after staying in penang for 4 days? oops. tongue.gif
*
Good quality Razer mouse = another RM200-300. Can stay another nite in Penang d drool.gif
dorinyeah
post Jul 26 2011, 12:43 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(jasonloh7906 @ Jul 26 2011, 12:41 AM)
use t10 13xled smd. if u get the 28xled one lagi bright i think. actually i wanna change to projector one. but cost RM600. so i wait lor. wait got money 1st. like this cheap XD
*
so no angel ring...then how much the 28xled? will easily spoil or kena block by police?
jackyap84
post Jul 26 2011, 12:44 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


wow... i'm late! sad.gif
TSxandras
post Jul 26 2011, 12:45 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dorinyeah @ Jul 26 2011, 12:43 AM)
so no angel ring...then how much the 28xled? will easily spoil or kena block by police?
*
LED have quite long life lah.. But kena block by police.. That I cannot guarantee.. laugh.gif

QUOTE(jackyap84 @ Jul 26 2011, 12:44 AM)
wow... i'm late! sad.gif
*
Not really. U're still in 1st page laugh.gif
Dav6534
post Jul 26 2011, 12:46 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 12:42 AM)
Good quality Razer mouse  = another RM200-300. Can stay another nite in Penang d drool.gif
*
adui...she din follow you back meh?
dorinyeah
post Jul 26 2011, 12:47 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 26 2011, 12:45 AM)
LED have quite long life lah.. But kena block by police.. That I cannot guarantee.. laugh.gif
Not really. U're still in 1st page laugh.gif
*
change LED bulb = HID??
and change LED just cucuk&main?
ZenGTMM
post Jul 26 2011, 12:50 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


Checking in..
TSxandras
post Jul 26 2011, 12:52 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 26 2011, 12:46 AM)
adui...she din follow you back meh?
*
No le.. She stayed in KL for a few months d..went back to spend time with family..Maybe next 2-3 weeks she'll be back..

QUOTE(dorinyeah @ Jul 26 2011, 12:47 AM)
change LED bulb = HID??
and change LED just cucuk&main?
*
Cucuk & main brows.gif I like ur sense of humour.

No, but any colours other than orange or yellow is generally prohibited by JPJ if we were to retrofit it to our cars, and this applies to headlamp & HID/LED lights as well.
dorinyeah
post Jul 26 2011, 12:55 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 26 2011, 12:52 AM)
No le.. She stayed in KL for a few months d..went back to spend time with family..Maybe next 2-3 weeks she'll be back..
Cucuk & main brows.gif I like ur sense of humour.

No, but any colours other than orange or yellow is generally prohibited by JPJ if we were to retrofit it to our cars, and this applies to headlamp & HID/LED lights as well.
*
so change to white color is prohibited....
i saw some can change from white to yellow, yellow to white...but anyhow when kena block change also no use 1 la...

then day running light like shorty5, installed kena tahan also doh.gif right?
TSxandras
post Jul 26 2011, 12:57 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dorinyeah @ Jul 26 2011, 12:55 AM)
so change to white color is prohibited....
i saw some can change from white to yellow, yellow to white...but anyhow when kena block change also no use 1 la...

then day running light like shorty5, installed kena tahan also  doh.gif right?
*
If they want to they can actually stop u, but u can play around with them telling that the DRL is accessory light & not foglight or headlamp.. brows.gif
dorinyeah
post Jul 26 2011, 01:00 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 26 2011, 12:57 AM)
If they want to they can actually stop u, but u can play around with them telling that the DRL is accessory light & not foglight or headlamp.. brows.gif
*
if DRL got controller then will be better lor...
better go change super bright yellow headlamp lor... also can shoot ppl ass until sun burn..white is moon-light....

TSxandras
post Jul 26 2011, 01:03 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dorinyeah @ Jul 26 2011, 01:00 AM)
if DRL got controller then will be better lor...
better go change super bright yellow headlamp lor...  also can shoot ppl ass until sun burn..white is moon-light....
*
HID yellow bulb ma can lo..brows.gif
Dav6534
post Jul 26 2011, 01:03 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 12:52 AM)
No le.. She stayed in KL for a few months d..went back to spend time with family..Maybe next 2-3 weeks she'll be back..
Cucuk & main brows.gif I like ur sense of humour.

No, but any colours other than orange or yellow is generally prohibited by JPJ if we were to retrofit it to our cars, and this applies to headlamp & HID/LED lights as well.
*
haha. youre going to have a sad 2 to 3 weeks time man. =P
jasonloh7906
post Jul 26 2011, 01:05 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(Dav6534 @ Jul 26 2011, 12:41 AM)
eleh...buy good quality razer mouse ma wont scroll till finger pain dy lo. or is your finger pain after staying in penang for 4 days? oops. tongue.gif
*
hahaha~~finger pain...i imagine how u do it.hahahaha~~

QUOTE(xandras @ Jul 26 2011, 12:41 AM)
brows.gif Not 1 nite mah.. 3 nites.. So quite ok lah.. brows.gif

Wat zeng meant is the overall of the TC.. Correct boost level with correct ECU tuning, etc etc will generally make it more reliable while gaining optimum power.. But not many TC sifus out there can do this la..
*
hahaha~~yah is ok. i prefer going for a trip XD included all in the package. eg genting XP
this is really young ppl punya budget.
no lah...i mean wat he mean by "if the first fark is done right "
hahahaha~~yup. tats the problem. tats why i am asking on who had done TC by xenon. seems quite good. maybe is just marketing??hahaha~~

QUOTE(dorinyeah @ Jul 26 2011, 12:43 AM)
so no angel ring...then how much the 28xled? will easily spoil or kena block by police?
*
yup. no angel ring. coz susah lah when dunno how to diy. need to spend money to pay for workmanship if i buy online. bcoz buy online cheaper. so far never got anything going thru blocks. coz when i turn on the headlight, most of the led light is covered edi. aiyah, jpj only post rule for hid that glare mah. somemore the led dont glare. but if u look at the led too long u still kena. hahahaha. previously i used the 8led one. above 4, below 4, purple white. 2led purple, 2led white. will change style everytime i on and off. but langsung cannot see got led when on headlamp. i post the picture 2moro for u to see the difference.

QUOTE(xandras @ Jul 26 2011, 12:45 AM)
LED have quite long life lah.. But kena block by police.. That I cannot guarantee.. laugh.gif
Not really. U're still in 1st page laugh.gif
*
never get block leh. but jpj website say only white and yellow light allowed. so i think dun use other color. it says no blue, purple, green.

QUOTE(dorinyeah @ Jul 26 2011, 12:47 AM)
change LED bulb = HID??
and change LED just cucuk&main?
*
the led bulb is just the headlamp t10. the small lamp.


QUOTE(dorinyeah @ Jul 26 2011, 12:55 AM)
so change to white color is prohibited....
i saw some can change from white to yellow, yellow to white...but anyhow when kena block change also no use 1 la...

then day running light like shorty5, installed kena tahan also  doh.gif right?
*
no lah~~white is not really phohibited. look at this.
http://portal.jpj.gov.my/index.php?option=...emid=43&lang=ms
for headlamp it can be white or yellow. then not allowed is blue,green and purple.
daylight i think no problem. normally the one that glare will get caught.
if u really want white, make sure it is halogen, not hid.

QUOTE(xandras @ Jul 26 2011, 12:57 AM)
If they want to they can actually stop u, but u can play around with them telling that the DRL is accessory light & not foglight or headlamp.. brows.gif
*
but still u r right. aiyah. when ur car is really stock, they wont care lah. if ur car is ah beng type, they tahan u 1st regardless u got wrong or not. hahahaha~~

QUOTE(dorinyeah @ Jul 26 2011, 01:00 AM)
if DRL got controller then will be better lor...
better go change super bright yellow headlamp lor...  also can shoot ppl ass until sun burn..white is moon-light....
*
super bright yellow also can. but dun like...hahaha~~look awkward on my car XP


Added on July 26, 2011, 1:06 am
QUOTE(xandras @ Jul 26 2011, 01:03 AM)
HID yellow bulb ma can lo..brows.gif
*
yup. but super yellow if glare also get caught lah~~

This post has been edited by jasonloh7906: Jul 26 2011, 01:06 AM
KKW
post Jul 26 2011, 01:06 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 26 2011, 01:03 AM)
HID yellow bulb ma can lo..brows.gif
*
HID got yellow meh? hmm.gif
You mean 3000k ?
TSxandras
post Jul 26 2011, 01:10 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 26 2011, 01:03 AM)
haha. youre going to have a sad 2 to 3 weeks time man. =P
*
I'm fine.. 3 nits enough to feed my hunger d.. XD when she's back she's gonna be here for another few more months ma..

QUOTE(jasonloh7906 @ Jul 26 2011, 01:05 AM)
hahaha~~finger pain...i imagine how u do it.hahahaha~~
hahaha~~yah is ok. i prefer going for a trip XD included all in the package. eg genting XP
this is really young ppl punya budget.
no lah...i mean wat he mean by "if the first fark is done right "
hahahaha~~yup. tats the problem. tats why i am asking on who had done TC by xenon. seems quite good. maybe is just marketing??hahaha~~
yup. no angel ring. coz susah lah when dunno how to diy. need to spend money to pay for workmanship if i buy online. bcoz buy online cheaper. so far never got anything going thru blocks. coz when i turn on the headlight, most of the led light is covered edi. aiyah, jpj only post rule for hid that glare mah. somemore the led dont glare. but if u look at the led too long u still kena. hahahaha. previously i used the 8led one. above 4, below 4, purple white. 2led purple, 2led white. will change style everytime i on and off. but langsung cannot see got led when on headlamp. i post the picture 2moro for u to see the difference.
never get block leh. but jpj website say only white and yellow light allowed. so i think dun use other color. it says no blue, purple, green.
the led bulb is just the headlamp t10. the small lamp.
no lah~~white is not really phohibited. look at this.
http://portal.jpj.gov.my/index.php?option=...emid=43〈=ms
for headlamp it can be white or yellow. then not allowed is blue,green and purple.
daylight i think no problem. normally the one that glare will get caught.
if u really want white, make sure it is halogen, not hid.
but still u r right. aiyah. when ur car is really stock, they wont care lah. if ur car is ah beng type, they tahan u 1st regardless u got wrong or not. hahahaha~~
super bright yellow also can. but dun like...hahaha~~look awkward on my car XP


Added on July 26, 2011, 1:06 am
yup. but super yellow if glare also get caught lah~~
*
My wira foglamp super bright yellow with yellow foglamp cover never kena than before.. XD
Dav6534
post Jul 26 2011, 01:11 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 01:10 AM)
I'm fine.. 3 nits enough to feed my hunger d.. XD when she's back she's gonna be here for another few more months ma..
My wira foglamp super bright yellow with yellow foglamp cover never kena than before.. XD
*
fulamak. i wonder that 3 nights you wasted her how badly. lol
TSxandras
post Jul 26 2011, 01:12 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 26 2011, 01:06 AM)
HID got yellow meh?  hmm.gif
You mean 3000k ?
*
Yea 3000k..


Added on July 26, 2011, 1:15 am@Dav, dun say till like I so evil lah..sweat.gif I'm into making things romantic n memorable for gals la..brows.gif

This post has been edited by xandras: Jul 26 2011, 01:15 AM
KKW
post Jul 26 2011, 01:16 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 26 2011, 01:12 AM)
Yea 3000k..


Added on July 26, 2011, 1:15 am@Dav, dun say till like I so evil lah..sweat.gif I'm into making things romantic n memorable for gals la..brows.gif
*
That one kau kau yellow sweat.gif
TSxandras
post Jul 26 2011, 01:18 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 26 2011, 01:16 AM)
That one kau kau yellow  sweat.gif
*
Yea.. N my myvi use 10000k blue for foglight.. XD
Dav6534
post Jul 26 2011, 01:18 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 01:12 AM)
Yea 3000k..


Added on July 26, 2011, 1:15 am@Dav, dun say till like I so evil lah..sweat.gif I'm into making things romantic n memorable for gals la..brows.gif
*
haha. should say that you sacrifice some energy for her somemore hor? tongue.gif
KKW
post Jul 26 2011, 01:19 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 26 2011, 01:18 AM)
Yea.. N my myvi use 10000k blue for foglight.. XD
*
Lol... If raining no use already..
Turn on like you didn't turn on only sweat.gif
TSxandras
post Jul 26 2011, 01:21 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 26 2011, 01:18 AM)
haha. should say that you sacrifice some energy for her somemore hor?  tongue.gif
*
XD it's my pleasure to serve & satiate..brows.gif

QUOTE(KKW @ Jul 26 2011, 01:19 AM)
Lol... If raining no use already..
Turn on like you didn't turn on only  sweat.gif
*
laugh.gif that 1 for aesthetic purpose only wan ma.. That's why put at foglight..
Dav6534
post Jul 26 2011, 01:27 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 26 2011, 01:21 AM)
XD it's my pleasure to serve & satiate..brows.gif
laugh.gif that 1 for aesthetic purpose only wan ma.. That's why put at foglight..
*
haha. you slowly serve la har. i need to sleep already. working in the morning tomorrow. nights yawn.gif
jasonloh7906
post Jul 26 2011, 01:27 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 26 2011, 01:10 AM)
I'm fine.. 3 nits enough to feed my hunger d.. XD when she's back she's gonna be here for another few more months ma..
My wira foglamp super bright yellow with yellow foglamp cover never kena than before.. XD
*
not glaring lah~~but super yellow not as glare as white lor. white hid that glare will make u curse that fella.

QUOTE(xandras @ Jul 26 2011, 01:18 AM)
Yea.. N my myvi use 10000k blue for foglight.. XD
*
10000k. super lor.my foglight burned edi. so when i get my salary i think i will buy one osram nightbreaker. hahahaha~~4300k is nice for me edi.

QUOTE(Dav6534 @ Jul 26 2011, 01:11 AM)
fulamak. i wonder that 3 nights you wasted her how badly. lol
*
should say how nicely mah. this is a nice thing leh XD
KKW
post Jul 26 2011, 01:29 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 26 2011, 01:21 AM)
XD it's my pleasure to serve & satiate..brows.gif
laugh.gif that 1 for aesthetic purpose only wan ma.. That's why put at foglight..
*
Oh no wonder..
Until now I still wondering why JPJ dont allow HID doh.gif
TSxandras
post Jul 26 2011, 01:31 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 26 2011, 01:27 AM)
haha. you slowly serve la har. i need to sleep already. working in the morning tomorrow. nights  yawn.gif
*
Lol. Me too, workin in the morning.. But had to online lah.. Cos paid full attention to a gal the past few days, now need a break.. XD

QUOTE(jasonloh7906 @ Jul 26 2011, 01:27 AM)
not glaring lah~~but super yellow not as glare as white lor. white hid that glare will make u curse that fella.
10000k. super lor.my foglight burned edi. so when i get my salary i think i will buy one osram nightbreaker. hahahaha~~4300k is nice for me edi.
should say how nicely mah. this is a nice thing leh XD
*
laugh.gif 10000k bulb damn hard to find..sweat.gif go normal halogen bulbs la.. Osram will do.. Don need go hid.. Save u from Kena hi light from other drivers n jpj road block..


Added on July 26, 2011, 1:32 am@KKW,

Because of the glare effect lah when u dont use HID with projector lights.. Very dangerous to drivers from opposite side of the road, especially those with astigmatism..

This post has been edited by xandras: Jul 26 2011, 01:32 AM
jasonloh7906
post Jul 26 2011, 01:33 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(KKW @ Jul 26 2011, 01:29 AM)
Oh no wonder..
Until now I still wondering why JPJ dont allow HID  doh.gif
*
easy answer is the design of the headlamp is not made for it. the factory made hid look damn cool and never hurt ur eyes one. go observe those expensive car. hahaha~~basically if ur hid wont glare, u wont get caught and being hate by other. i am sure u have experience kena glare by other.
TSxandras
post Jul 26 2011, 01:36 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 26 2011, 01:33 AM)
easy answer is the design of the headlamp is not made for it. the factory made hid look damn cool and never hurt ur eyes one. go observe those expensive car. hahaha~~basically if ur hid wont glare, u wont get caught and being hate by other. i am sure u have experience kena glare by other.
*
No need see expensive cars lah.. Waja CPS & Alza can already..brows.gif
ZenGTMM
post Jul 26 2011, 01:42 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 26 2011, 12:39 AM)
blink.gif who said so?
Zzz.. Edit lo.. Scroll till finger pain xD
Zeng paid for my 1st stay at G Hotel brows.gif
*
From now on u will always rmb who contributed the first night fark for u with ur CKT in Penang.

QUOTE(Dav6534 @ Jul 26 2011, 01:11 AM)
fulamak. i wonder that 3 nights you wasted her how badly. lol
*
U wanna know? Lets say its equivalent to ckdenion's engine.
TSxandras
post Jul 26 2011, 01:47 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 26 2011, 01:42 AM)
From now on u will always rmb who contributed the first night fark for u with ur CKT in Penang.
U wanna know? Lets say its equivalent to ckdenion's engine.
*
sweat.gif not first nite fark la.. 1st nite of the 3-nite ordeal at Penang..xD but thanks bro..brows.gif

blink.gif where got so teruk.. Denion's case whole Siham have to change d wan.. XD
MovingMachine
post Jul 26 2011, 02:00 AM

New Member
*
Junior Member
30 posts

Joined: Sep 2010
Anyone actually follow the tire pressure psi on the door? Is it better to follow or increase a bit more?
KKW
post Jul 26 2011, 02:01 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 26 2011, 01:31 AM)
Lol. Me too, workin in the morning.. But had to online lah.. Cos paid full attention to a gal the past few days, now need a break.. XD
laugh.gif 10000k bulb damn hard to find..sweat.gif go normal halogen bulbs la.. Osram will do.. Don need go hid.. Save u from Kena hi light from other drivers n jpj road block..


Added on July 26, 2011, 1:32 am@KKW,

Because of the glare effect lah when u dont use HID with projector lights.. Very dangerous to drivers from opposite side of the road, especially those with astigmatism..
*
Oh.. icic.. smile.gif

QUOTE(jasonloh7906 @ Jul 26 2011, 01:33 AM)
easy answer is the design of the headlamp is not made for it. the factory made hid look damn cool and never hurt ur eyes one. go observe those expensive car. hahaha~~basically if ur hid wont glare, u wont get caught and being hate by other. i am sure u have experience kena glare by other.
*
Yup. I like those automatic projector light..
Auto adjust according to the road and corner..
ZenGTMM
post Jul 26 2011, 02:09 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 26 2011, 01:47 AM)
sweat.gif not first nite fark la.. 1st nite of the 3-nite ordeal at Penang..xD but thanks bro..brows.gif

blink.gif where got so teruk.. Denion's case whole Siham have to change d wan.. XD
*
yeah mah first nite in Penang fark.. XD..
Denion case Siham cracked and gone.. Must be geoduck too big.

QUOTE(MovingMachine @ Jul 26 2011, 02:00 AM)
Anyone actually follow the tire pressure psi on the door? Is it better to follow or increase a bit more?
*
Normally increase a bit.. Increase by 2-3psi.
dorinyeah
post Jul 26 2011, 08:38 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 26 2011, 01:03 AM)
HID yellow bulb ma can lo..brows.gif
*
Haha... HID will kena block so better dun go for HID.... LED rclxms.gif

QUOTE(jasonloh7906 @ Jul 26 2011, 01:05 AM)
hahaha~~finger pain...i imagine how u do it.hahahaha~~
hahaha~~yah is ok. i prefer going for a trip XD included all in the package. eg genting XP
this is really young ppl punya budget.
no lah...i mean wat he mean by "if the first fark is done right "
hahahaha~~yup. tats the problem. tats why i am asking on who had done TC by xenon. seems quite good. maybe is just marketing??hahaha~~
yup. no angel ring. coz susah lah when dunno how to diy. need to spend money to pay for workmanship if i buy online. bcoz buy online cheaper. so far never got anything going thru blocks. coz when i turn on the headlight, most of the led light is covered edi. aiyah, jpj only post rule for hid that glare mah. somemore the led dont glare. but if u look at the led too long u still kena. hahahaha. previously i used the 8led one. above 4, below 4, purple white. 2led purple, 2led white. will change style everytime i on and off. but langsung cannot see got led when on headlamp. i post the picture 2moro for u to see the difference.
never get block leh. but jpj website say only white and yellow light allowed. so i think dun use other color. it says no blue, purple, green.
the led bulb is just the headlamp t10. the small lamp.
no lah~~white is not really phohibited. look at this.
http://portal.jpj.gov.my/index.php?option=...emid=43&lang=ms
for headlamp it can be white or yellow. then not allowed is blue,green and purple.
daylight i think no problem. normally the one that glare will get caught.
if u really want white, make sure it is halogen, not hid.
but still u r right. aiyah. when ur car is really stock, they wont care lah. if ur car is ah beng type, they tahan u 1st regardless u got wrong or not. hahahaha~~
super bright yellow also can. but dun like...hahaha~~look awkward on my car XP


Added on July 26, 2011, 1:06 am
yup. but super yellow if glare also get caught lah~~
*
so where u buy ur LED? can share?


Added on July 26, 2011, 8:41 amcoming thursday i go Cose 10am, who want join me?

This post has been edited by dorinyeah: Jul 26 2011, 08:41 AM
unemployed
post Jul 26 2011, 08:54 AM

New Member
*
Junior Member
28 posts

Joined: Jul 2009
what tint films u guys using?? i park my car under open parking lot, at afternoon when i get my car then steering wheel is burning my hand...and i feel like toasted!! arhgg
vccy
post Jul 26 2011, 08:57 AM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(Fubar20 @ Jul 26 2011, 12:57 AM)
You sleepy is it? V21 lah. biggrin.gif
*
Ops tongue.gif yeah feel very sleepy ma. Gonna sleep already.

QUOTE(xandras @ Jul 26 2011, 01:02 AM)
brows.gif He spam king ma..

Cuci mata!! Only available within an hour!! brows.gif

» Click to show Spoiler - click again to hide... «

*
I sleep already. sad.gif

QUOTE(xandras @ Jul 26 2011, 01:33 AM)
sweat.gif I'm broke again man because of the itchiness to park my geoduck.. 1st nite G Hotel, 2nd nite Hard Rock Batu Ferringhi,  3rd nite Golden Sands also Batu Ferringhi.. Total spent RM 1.3k plus.. doh.gif What a damn unforgettable way to spend RM 1.3k laugh.gif


Added on July 26, 2011, 12:34 amV21 is here!! Click the link below!!

PPLYN V21
*
Wow so your Geoduck enjoyed? biggrin.gif

Guys this fellow pm me for OEM rear persona disc brake.
http://forum.lowyat.net/index.php?showtopic=1972492&hl=
K.Lee
post Jul 26 2011, 09:17 AM

New Member
*
Junior Member
10 posts

Joined: Feb 2010
Regarding LCP going up hill... i'm still going uphill everyday, no issue also...

arfaie
post Jul 26 2011, 09:27 AM

www.putera.com/tanya
****
Senior Member
687 posts

Joined: Jan 2003
From: ::Sbrg Jaya, Penang & Pkln Hulu, Perak::



last nite reading v20, this morning already v21? so damn fast
Cavino
post Jul 26 2011, 09:42 AM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(unemployed @ Jul 26 2011, 08:54 AM)
what tint films u guys using?? i park my car under open parking lot, at afternoon when i get my car then steering wheel is burning my hand...and i feel like toasted!! arhgg
*
Even if you put VKool, you will also get toasted, just not toasted black. I'm using VKool Elite.

Use a windscreen cover to cover the front dash...works better.

This post has been edited by Cavino: Jul 26 2011, 09:49 AM
dorinyeah
post Jul 26 2011, 09:46 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(vccy @ Jul 26 2011, 08:57 AM)
Ops  tongue.gif  yeah feel very sleepy ma. Gonna sleep already.
I sleep already.  sad.gif
Wow so your Geoduck enjoyed?  biggrin.gif

Guys this fellow pm me for OEM rear persona disc brake.
http://forum.lowyat.net/index.php?showtopic=1972492&hl=
*
wah...this is 1200 leh... seem like not include installation la...
OEM rear persona disc brake mean original proton brake?
Cavino
post Jul 26 2011, 09:49 AM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(xandras @ Jul 26 2011, 01:31 AM)
Because of the glare effect lah when u dont use HID with projector lights.. Very dangerous to drivers from opposite side of the road, especially those with astigmatism..
*
Ya lor ya lor...I always *** those ppl with HID without projector lights...damn glaring, almost knock into them. If only I drove a big lorry, I WILL purposely knock into them, then blame them for illegally installing HID..

Installing HID without projector is very uncool. Every time I see ppl with this setup, instead of thinking how cool is those white light, my thought is, "so cheap skate kah...got money install HID, no money to mod a projector light....if want to fcuk, don't fcuk halfway...no song wan, better not do it at all"
jackyap84
post Jul 26 2011, 09:49 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(xandras @ Jul 26 2011, 12:45 AM)
LED have quite long life lah.. But kena block by police.. That I cannot guarantee.. laugh.gif
Not really. U're still in 1st page laugh.gif
*
luckily i still in the 1st page! rclxm9.gif
ngeo88
post Jul 26 2011, 10:37 AM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
haiz..... doh.gif always missed you guys post pic....btw nice ported and polish job for CKT at G.hotel penang Xan .......


Added on July 26, 2011, 10:38 am
QUOTE(jackyap84 @ Jul 26 2011, 09:49 AM)
luckily i still in the 1st page!  rclxm9.gif
*
doh.gif

This post has been edited by ngeo88: Jul 26 2011, 10:38 AM
luenywoon
post Jul 26 2011, 10:44 AM

New Member
*
Junior Member
30 posts

Joined: Mar 2007


QUOTE(Cavino @ Jul 26 2011, 09:42 AM)
Even if you put VKool, you will also get toasted, just not toasted black. I'm using VKool Elite.

Use a windscreen cover to cover the front dash...works better.
*
Windscreen cover is so inconvenient..
jackyap84
post Jul 26 2011, 10:46 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(ngeo88 @ Jul 26 2011, 10:37 AM)
haiz..... doh.gif  always missed you guys post pic....btw nice ported and polish job for CKT at G.hotel penang Xan .......


Added on July 26, 2011, 10:38 am
doh.gif
*
u done u PnP?
ngeo88
post Jul 26 2011, 10:48 AM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(jackyap84 @ Jul 26 2011, 10:46 AM)
u done u PnP?
*
i mean Xan PnP at penang trip with his CKT..... doh.gif
Fubar20
post Jul 26 2011, 10:53 AM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(ngeo88 @ Jul 26 2011, 10:48 AM)
i mean Xan PnP at penang trip with his CKT..... doh.gif
*
Forgive him bro. He is one innocent fella who knows belakang mari only. brows.gif


This post has been edited by Fubar20: Jul 26 2011, 11:02 AM
dorinyeah
post Jul 26 2011, 11:22 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(ngeo88 @ Jul 26 2011, 10:48 AM)
i mean Xan PnP at penang trip with his CKT..... doh.gif
*
after PnP ckt have to change thicker&bigger piston lor, else loss grip on cylinder wall. hmm.gif

This post has been edited by dorinyeah: Jul 26 2011, 11:23 AM
Fubar20
post Jul 26 2011, 11:25 AM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(dorinyeah @ Jul 26 2011, 11:22 AM)
after PnP ckt have to change thicker&bigger piston lor, else loss grip on cylinder wall. hmm.gif
*
Er, PnP is for intake and exhaust port only. Got involve piston ka? biggrin.gif

dorinyeah
post Jul 26 2011, 11:29 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(Fubar20 @ Jul 26 2011, 11:25 AM)
Er, PnP is for intake and exhaust port only. Got involve piston ka?  biggrin.gif
*
PnP not dig the cylinder wall and change larger piston meh? then wat it should call ah??
my fren told me PnP is make engine displacement bigger like 1.6 dig to 1.8 like tat...
dzie25
post Jul 26 2011, 11:44 AM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
HI HI All, I'm New To Persona.. just bought my Car Last Month ago ! At first Greatz to Thread 21yos !

I have a question, i'm having a B-Line, i thinking to change RIM+ Tayer.. so... original is 15inch .. how was the feed back on 16inch.. or no difference at all.......

Thanks ! rclxms.gif
jackyap84
post Jul 26 2011, 11:47 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(Fubar20 @ Jul 26 2011, 10:53 AM)
Forgive him bro. He is one innocent fella who knows belakang mari only.  brows.gif
*
drool.gif
dorinyeah
post Jul 26 2011, 11:53 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(dzie25 @ Jul 26 2011, 11:44 AM)
HI HI All,  I'm New To Persona.. just bought my Car Last Month ago ! At first Greatz to Thread 21yos !

I have a question, i'm having a B-Line, i thinking to change RIM+ Tayer.. so... original is 15inch .. how was the feed back on 16inch.. or no difference at all.......

Thanks ! rclxms.gif
*
welcome!! color and transmission pls...TS will add u in.
Next month they may have Rims survey TT. please join tat time.

This post has been edited by dorinyeah: Jul 26 2011, 11:54 AM
unknownhammie
post Jul 26 2011, 12:18 PM

Casual
***
Junior Member
399 posts

Joined: Aug 2008
From: Hell


Hmm, always say say only.. now want make it happen d...

Xan this weekend free? Salary out i pass to u then recommend extractor liao.. biggrin.gif

mau install...
ngeo88
post Jul 26 2011, 12:38 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(dorinyeah @ Jul 26 2011, 11:29 AM)
PnP not dig the cylinder wall and change larger piston meh? then wat it should call ah??
my fren told me PnP is make engine displacement bigger like 1.6 dig to 1.8 like tat...
*
PnP got few stage lah, if wanna make bigger piston also can lah...but same as for CKT after so many PnP sure need to insatall bigeer valve due to the angine block HOLE become bigger and LOOSE ..... laugh.gif
KKW
post Jul 26 2011, 01:01 PM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


Guys,
Did castrol got any promotion?
I planning to change my engine oil earlier..
Cavino
post Jul 26 2011, 01:01 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(ngeo88 @ Jul 26 2011, 12:38 PM)
PnP got few stage lah, if wanna make bigger piston also can lah...but same as for CKT after so many PnP sure need to insatall bigeer valve due to the angine block HOLE become bigger and LOOSE ..... laugh.gif
*
No need change piston, change another ride that suits the current piston. More efficient and cost saving.
stormaker
post Jul 26 2011, 01:06 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(unemployed @ Jul 26 2011, 08:54 AM)
what tint films u guys using?? i park my car under open parking lot, at afternoon when i get my car then steering wheel is burning my hand...and i feel like toasted!! arhgg
*
I use 3M Crystaline ... parked my car from 8am to 12pm, at noon time, when get into my car its not toasting or burning hot ... eventhough everything leather, cool down also very fast, n dont even need to open all the doors/windows to cool it down.
dorinyeah
post Jul 26 2011, 01:29 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(KKW @ Jul 26 2011, 01:01 PM)
Guys,
Did castrol got any promotion?
I planning to change my engine oil earlier..
*
castro magnatec 79.90 @ old klang road tesco, puchong tesco selling 99.90
edge is 145 @ old klang road testco & puchong tesco
dadurtyz
post Jul 26 2011, 01:30 PM

On my way
****
Senior Member
658 posts

Joined: May 2006
From: Melaka



QUOTE(dorinyeah @ Jul 26 2011, 01:29 PM)
castro magnatec 79.90 @ old klang road tesco, puchong tesco selling 99.90
edge is 145 @ old klang road testco & puchong tesco
*
79.90? rclxub.gif , melaka tesco RM84 for maganatec in euro packaging.
dorinyeah
post Jul 26 2011, 01:32 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(dadurtyz @ Jul 26 2011, 01:30 PM)
79.90?  rclxub.gif , melaka tesco RM84 for maganatec in euro packaging.
*
ya wow...
zeng told me 79.90 at old klang road, when i go puchong is 99.90...damn
tesco price not standard 1!!!
dadurtyz
post Jul 26 2011, 01:33 PM

On my way
****
Senior Member
658 posts

Joined: May 2006
From: Melaka



QUOTE(dorinyeah @ Jul 26 2011, 01:32 PM)
ya wow...
zeng told me 79.90 at old klang road, when i go puchong is 99.90...damn
tesco price not standard 1!!!
*
cheap 5ringgit only, not worth go to KL just to get the oil sweat.gif
Fubar20
post Jul 26 2011, 01:36 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(stormaker @ Jul 26 2011, 01:06 PM)
I use 3M Crystaline ... parked my car from 8am to 12pm, at noon time, when get into my car its not toasting or burning hot ... eventhough everything leather, cool down also very fast, n dont even need to open all the doors/windows to cool it down.
*
How much u install and where you did it?
QUOTE(dorinyeah @ Jul 26 2011, 01:32 PM)
ya wow...
zeng told me 79.90 at old klang road, when i go puchong is 99.90...damn
tesco price not standard 1!!!
*
Maybe he check during different day lo. Here at Shah Alam also 99.90 last week.
dorinyeah
post Jul 26 2011, 01:36 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(dadurtyz @ Jul 26 2011, 01:33 PM)
cheap 5ringgit only, not worth go to KL just to get the oil  sweat.gif
*
yup...but if puchong and old klang road then better save the RM20! brows.gif
Fubar20
post Jul 26 2011, 01:37 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(dadurtyz @ Jul 26 2011, 01:33 PM)
cheap 5ringgit only, not worth go to KL just to get the oil  sweat.gif
*
For u, of course lah. Have to pay petrol and toll somemore. biggrin.gif
KKW
post Jul 26 2011, 01:45 PM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(dorinyeah @ Jul 26 2011, 01:29 PM)
castro magnatec 79.90 @ old klang road tesco, puchong tesco selling 99.90
edge is 145 @ old klang road testco & puchong tesco
*
The edge is 5-40W or 0-40W? hmm.gif
stormaker
post Jul 26 2011, 01:50 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(Fubar20 @ Jul 26 2011, 01:36 PM)
How much u install and where you did it?
Total is RM1800 with 5 years warranty against defect n JPJ summon, n free 8 or 10 inches Nano tint film for top part of windsreen. But, Im from East Malaysia lo.
dorinyeah
post Jul 26 2011, 01:54 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(KKW @ Jul 26 2011, 01:45 PM)
The edge is 5-40W or 0-40W? hmm.gif
*
10-40w, semi oil.
u do 10k service or 5k service 1st?
10k choose edge la...

This post has been edited by dorinyeah: Jul 26 2011, 01:54 PM
Cavino
post Jul 26 2011, 02:00 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(stormaker @ Jul 26 2011, 01:06 PM)
I use 3M Crystaline ... parked my car from 8am to 12pm, at noon time, when get into my car its not toasting or burning hot ... eventhough everything leather, cool down also very fast, n dont even need to open all the doors/windows to cool it down.
*
3M 70 has 50% tser and Vkool 54% tser. Almost similar. Trying parking from 12pm to 4pm......sure very hot on steering, but won't burn like without tint.

"Total is RM1800 with 5 years warranty against defect n JPJ summon". If go puspakom sure fail wan coz its default VLT already 68%.

This post has been edited by Cavino: Jul 26 2011, 02:03 PM
samwongjyhhorng
post Jul 26 2011, 02:02 PM

New Member
*
Junior Member
10 posts

Joined: Jun 2010


QUOTE(unknownhammie @ Jul 26 2011, 12:18 PM)
Hmm, always say say only.. now want make it happen d...

Xan this weekend free? Salary out i pass to u then recommend extractor liao.. biggrin.gif

mau install...
*
dun need consider ady..use hotbits brows.gif
Fubar20
post Jul 26 2011, 02:03 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(stormaker @ Jul 26 2011, 01:50 PM)
Total is RM1800 with 5 years warranty against defect n JPJ summon, n free 8 or 10 inches Nano tint film for top part of windsreen. But, Im from East Malaysia lo.
*
Wow. Guess I have to pass on this one. biggrin.gif
QUOTE(dorinyeah @ Jul 26 2011, 01:54 PM)
10-40w, semi oil.
u do 10k service or 5k service 1st?
10k choose edge la...
*
Bro, on offer is Edge Sport 0W-40 Fully lah. doh.gif
KKW
post Jul 26 2011, 02:08 PM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(dorinyeah @ Jul 26 2011, 01:54 PM)
10-40w, semi oil.
u do 10k service or 5k service 1st?
10k choose edge la...
*
I know.. Edge got 2 type..
0-40W or 5-40W
I use fully I will service my car at 5k also smile.gif

QUOTE(Fubar20 @ Jul 26 2011, 02:03 PM)
Wow. Guess I have to pass on this one. biggrin.gif

Bro, on offer is Edge Sport 0W-40 Fully lah. doh.gif
*
Oh.. Tesco got sell 5-40?
dorinyeah
post Jul 26 2011, 02:13 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(KKW @ Jul 26 2011, 02:08 PM)
I know.. Edge got 2 type..
0-40W or 5-40W
I use fully I will service my car at 5k also  smile.gif
Oh.. Tesco got sell 5-40?
*
when u go service?
Fubar20
post Jul 26 2011, 02:14 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(KKW @ Jul 26 2011, 02:08 PM)
I know.. Edge got 2 type..
0-40W or 5-40W
I use fully I will service my car at 5k also  smile.gif
Oh.. Tesco got sell 5-40?
*
0W-40 is Edge Sport and 5W-40 is Edge only. Both are fully synthetic.
Why you want to use fully to service at 5K? Isn't suppose to be semi? hmm.gif
Last week I saw 0W-40 and Magnatec 10W-40 Semi only at Shah Alam.

This post has been edited by Fubar20: Jul 26 2011, 02:22 PM
rayt33
post Jul 26 2011, 02:17 PM

New Member
*
Newbie
0 posts

Joined: Jul 2011
From: KL


Congratz v21!! biggrin.gif
ngeo88
post Jul 26 2011, 02:26 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(KKW @ Jul 26 2011, 01:45 PM)
The edge is 5-40W or 0-40W? hmm.gif
*
5W-40 I'm using it RM165 1 month ago. tongue.gif
dorinyeah
post Jul 26 2011, 02:34 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(ngeo88 @ Jul 26 2011, 02:26 PM)
5W-40 I'm using it RM165 1 month ago. tongue.gif
*
now RM 145 can get 0-40 lo...
Cavino
post Jul 26 2011, 02:45 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


Reading me makes me doubt Castrol Magnatec..

"In the additive package used in the manufacturing of lubricants, they have 2 main functions. They are 1. detergent package and 2. dispersant package. The additive in 1 is supposed to clean up all the "rubbish" like acids, carbon, rusts, water vapour generated from the combustion. Dispersant package is to disperse all the "rubbish" in the oil so that they are equally and completely disperse throughout/inside the oil. These "rubbish" if not disperse may clog or stick to the moving parts inside the engine. Also they may not be totally drained out during changing of the engine oil. Many people have a misconception if the engine oil drained out during the oil change is very black or dirty, the oil is not so good. Actually, the reverse is true. A good engine oil with good additive package will clear as much "rubbish" inside the engine during the oil change."

except taken from a supposedly ex-Castrol oil man in autoworld forum.

ngeo88
post Jul 26 2011, 03:00 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(dorinyeah @ Jul 26 2011, 02:34 PM)
now RM 145 can get 0-40 lo...
*
ya but that is 0W-40 , 0W is not too good for our local engine, it is too thin during cold start more friction to engine parts, if we need our engine long lasting use at least 5W, 0W is mainly for sport performance.
Fubar20
post Jul 26 2011, 03:06 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(ngeo88 @ Jul 26 2011, 03:00 PM)
ya but that is 0W-40 , 0W is not too good for our local engine, it is too thin during cold start more friction to engine parts, if we need our engine long lasting use at least 5W, 0W is mainly for sport performance.
*
Actually, 0W is for winter use which is below freezing temperature while 40 is for SAE 40 grade oil which is thinner than SAE 50 grade (recommended in the manual)
This type of oil (eg 0W-40, 5W-40 and 10W-40) is called multi grade oil which can be used in cold and hot temperature.
Actually, 0W-40, 5W-40 and 10W-40 have the same viscosity during our cold start engine in Malaysia.
So no problem for our engine because all the above are SAE 40 grade engine oil.

This post has been edited by Fubar20: Jul 26 2011, 03:17 PM
miriel10
post Jul 26 2011, 03:17 PM

Casual
***
Junior Member
376 posts

Joined: Dec 2008


First off, congrats on v21!

Secondly, do you think installing fuel regulators will further improve the car's performance? Or do the exhaust piping first?

My Persona is the 1st gen Persona. Model 2007, B-Line, MT

What I have done so far:
1. HotBits 4-2-1 extractor & midbox with dunno what brand s-flow muffler
2. K&N Open Pod Air Filter injection kit (changed this from Works Engineering drop in)
3. Ultra Racing Front Strut Bar (3 Point) & Anti Roll Bar
4. Aerospeed LCP & Spark Plug Cable
5. Denso Iridium Spark Plugs
ngeo88
post Jul 26 2011, 03:22 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(Cavino @ Jul 26 2011, 02:45 PM)
Reading me makes me doubt Castrol Magnatec..

"In the additive package used in the manufacturing of lubricants, they have 2 main functions. They are 1. detergent package and 2. dispersant package. The additive in 1 is supposed to clean up all the "rubbish" like acids, carbon, rusts, water vapour generated from the combustion. Dispersant package is to disperse all the "rubbish" in the oil so that they are equally and completely disperse throughout/inside the oil. These "rubbish" if not disperse may clog or stick to the moving parts inside the engine. Also they may not be totally drained out during changing of the engine oil. Many people have a misconception if the engine oil drained out during the oil change is very black or dirty, the oil is not so good. Actually, the reverse is true. A good engine oil with good additive package will clear as much "rubbish" inside the engine during the oil change."

except taken from a supposedly ex-Castrol oil man in autoworld forum.
*
i Thnik one of our member post this here last month and it get some of our memeber here fr** that.......
the statement means if oil turn black easlly means the engine oil help to clean the rubbish inside the engine, else if the engine oil not turning black it was useless and cannot clean the engine. so now lets THINK THAT:

1. Engine oil main function is lubricate the engine high speed moving parts instead of CLEANING function. When the engine turn black it measn the original oil molecule has change and it will not able to act as lube to protect the engine parts any more.
Exp: go to see your kitchien wok if the wok not was properly the cooking oil will become black and stick at the bottom.

2. When drain our engine oil if it seen in very black colour it means it the oil it self are seriously in poor quality or the engine is aging, els it must be engine failure and cause it over heat and create carbon.
THINK THAT: If our car are new and nothing wrong to our engine why our drained engine oil should seen in very dark black colour?

3. If the drain engine oil are look very dark black it said to clean rubbish from engine is true.
THEN: when our car has black smoke came out also the engine running self cleaning to exhaust out the rubbish from our engine is it true..... whistling.gif


Added on July 26, 2011, 3:26 pm
QUOTE(Fubar20 @ Jul 26 2011, 03:06 PM)
Actually, 0W is for winter use which is below freezing temperature while 40 is for SAE 40 grade oil which is thinner than SAE 50 grade (recommended in the manual)
This type of oil (eg 0W-40, 5W-40 and 10W-40) is called multi grade oil which can be used in cold and hot temperature.
Actually, 0W-40, 5W-40 and 10W-40 have the same viscosity during our cold start engine in Malaysia.
So no problem for our engine because all the above are SAE 40 grade engine oil.
*
yes but it dose have the different at our cold star event our lowest temperature are 28C but if compare to 5W are still thiner, thats why Castro call it Sport edge and they bring in 2 type 0W-40 and 5W-40 in different price.

This post has been edited by ngeo88: Jul 26 2011, 03:26 PM
dadurtyz
post Jul 26 2011, 03:31 PM

On my way
****
Senior Member
658 posts

Joined: May 2006
From: Melaka



mang at bottle it self already write design for BMW and mercedez, the oil design for perfomance car, use magnatec also enough no need waste money
carloompunk
post Jul 26 2011, 03:38 PM

along
******
Senior Member
1,227 posts

Joined: Jul 2007



hi..
anyone know whre is the nearest sc that can reflash ecu..
bdwany im at sri gombak..
thx .. smile.gif
ngeo88
post Jul 26 2011, 03:40 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(dadurtyz @ Jul 26 2011, 03:31 PM)
mang at bottle it self already write design for BMW and mercedez, the oil design for perfomance car, use magnatec also enough no need waste money
*
magnectech rm 100 change every 5k km: 10k km = rm 200
edge rm 165 change every 10k km : 10k km = rm 165

rm200 - rm 165 = rm35.00 saving .......waste money blink.gif

if i am not wrong it said "design accordance to BMW and mercedez" and not "design for BMW and mercedez"

"design accordance to BMW and mercedez" = means it is suitable to use for BMW and mercedez but not restricted others brand of car to use it.

"design for BMW and mercedez" = means it is only for BMW and mercedez others use at your own risk.

This post has been edited by ngeo88: Jul 26 2011, 03:51 PM
Fubar20
post Jul 26 2011, 03:44 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(ngeo88 @ Jul 26 2011, 03:22 PM)
i Thnik one of our member post this here last month and it get some of our memeber here fr** that.......
the statement means if oil turn black easlly means the engine oil help to clean the rubbish inside the engine, else if the engine oil not turning black it was useless and cannot clean the engine. so now lets THINK THAT:

1. Engine oil main function is lubricate the engine high speed moving parts instead of CLEANING function. When the engine turn black it measn the original oil molecule has change and it will not able to act as lube to protect the engine parts any more.
Exp: go to see your kitchien wok if the wok not was properly the cooking oil will become black and stick at the bottom.

2. When drain our engine oil if it seen in very black colour it means it the oil it self are seriously in poor quality or the engine is aging, els it must be engine failure and cause it over heat and create carbon.
THINK THAT: If our car are new and nothing wrong to our engine why our drained engine oil should seen in very dark black colour?

3. If the drain engine oil are look very dark black it said to clean rubbish from engine is true.
THEN: when our car has black smoke came out also the engine running self cleaning to exhaust out the rubbish from our engine is it true..... whistling.gif


Added on July 26, 2011, 3:26 pm
yes but it dose have the different at our cold star event our lowest temperature are 28C but if compare to 5W are still thiner, thats why Castro call it Sport edge and they bring in 2 type 0W-40 and 5W-40 in different price.
*
Ya, bro. You are right but is the difference very significant? Here are the three oils datasheet.
Please compare the viscosity at 40 degree C for 0W-40, 5W-40 and a more thinner grade 5W-30.
Attached File  castrol_edge_5w_40.pdf ( 118.8k ) Number of downloads: 10
Attached File  EDGESport0W_40.pdf ( 25.27k ) Number of downloads: 9
Attached File  castrol_magnatec_5w_30_engine_oil_ford_a1.pdf ( 56.75k ) Number of downloads: 4



Added on July 26, 2011, 3:47 pm
QUOTE(ngeo88 @ Jul 26 2011, 03:40 PM)
magnectech rm 100 change every 5k km: 10k km = rm 200
edge rm 175 change every 10k km : 10k km = rm 165

rm200 - rm 165 =  rm35.00 saving  .......waste money    blink.gif
*
Haha.. Fully where got waste money want. If waste money, sure market don't want this product.

This post has been edited by Fubar20: Jul 26 2011, 03:47 PM
ngeo88
post Jul 26 2011, 03:50 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(Fubar20 @ Jul 26 2011, 03:44 PM)
Ya, bro. You are right but is the difference very significant? Here are the three oils datasheet.
Please compare the viscosity at 40 degree C for 0W-40, 5W-40 and a more thinner grade 5W-30.
Attached File  castrol_edge_5w_40.pdf ( 118.8k ) Number of downloads: 10
Attached File  EDGESport0W_40.pdf ( 25.27k ) Number of downloads: 9
Attached File  castrol_magnatec_5w_30_engine_oil_ford_a1.pdf ( 56.75k ) Number of downloads: 4



Added on July 26, 2011, 3:47 pm
Haha.. Fully where got waste money want. If waste money, sure market don't want this product.
*
to be frank i never try the 0W oil yet doh.gif since Zeng and Xan here also not recomented and our Campro are enough rawh.....when using 5W-40 so not thingking to use it. biggrin.gif
dorinyeah
post Jul 26 2011, 03:52 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(Fubar20 @ Jul 26 2011, 03:44 PM)
Ya, bro. You are right but is the difference very significant? Here are the three oils datasheet.
Please compare the viscosity at 40 degree C for 0W-40, 5W-40 and a more thinner grade 5W-30.
Attached File  castrol_edge_5w_40.pdf ( 118.8k ) Number of downloads: 10
Attached File  EDGESport0W_40.pdf ( 25.27k ) Number of downloads: 9
Attached File  castrol_magnatec_5w_30_engine_oil_ford_a1.pdf ( 56.75k ) Number of downloads: 4



Added on July 26, 2011, 3:47 pm
Haha.. Fully where got waste money want. If waste money, sure market don't want this product.
*
when see this datasheet i rclxub.gif


Added on July 26, 2011, 3:53 pm
QUOTE(ngeo88 @ Jul 26 2011, 03:50 PM)
to be frank i never try the 0W oil yet   doh.gif  since Zeng and Xan here also not recomented and our Campro are enough rawh.....when using 5W-40 so not thingking to use it. biggrin.gif
*
i think zeng gonna use this castro 0-40. if not mistaken...

This post has been edited by dorinyeah: Jul 26 2011, 03:54 PM
ngeo88
post Jul 26 2011, 03:57 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(dorinyeah @ Jul 26 2011, 03:52 PM)
when see this datasheet i rclxub.gif


Added on July 26, 2011, 3:53 pm
i think zeng gonna use this castro 0-40. if not mistaken...
*
he wanna be lab rat or cannot find a cheap Edge so have to tolerate for 0W-40 finally. laugh.gif

This post has been edited by ngeo88: Jul 26 2011, 03:58 PM
TSxandras
post Jul 26 2011, 04:05 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 26 2011, 02:09 AM)
yeah mah first nite in Penang fark.. XD..
Denion case Siham cracked and gone.. Must be geoduck too big.
Normally increase a bit.. Increase by 2-3psi.
*
brows.gif His geoduck koyak the whole piston ring + burn & melt the piston inside also..

QUOTE(unemployed @ Jul 26 2011, 08:54 AM)
what tint films u guys using?? i park my car under open parking lot, at afternoon when i get my car then steering wheel is burning my hand...and i feel like toasted!! arhgg
*
Mine TintMaster Titanium Black 8mil..

QUOTE(vccy @ Jul 26 2011, 08:57 AM)
Ops  yeah feel very sleepy ma. Gonna sleep already.
I sleep already. 
Wow so your Geoduck enjoyed?

Guys this fellow pm me for OEM rear persona disc brake.
http://forum.lowyat.net/index.php?showtopic=1972492&hl=
*
Of course enjoy lar brows.gif.. Siham die die also wan me to stay another nite but I had to work.. + pokai d after staying there so long.. laugh.gif

QUOTE(Cavino @ Jul 26 2011, 09:42 AM)
Even if you put VKool, you will also get toasted, just not toasted black. I'm using VKool Elite.

Use a windscreen cover to cover the front dash...works better.
*
Agreed.. Just get a windscreen cover.. Cheaper, more reliable & better solution.. Can protect ur dashboard from UV rays also..

QUOTE(dorinyeah @ Jul 26 2011, 09:46 AM)
wah...this is 1200 leh... seem like not include installation la...
OEM rear persona disc brake mean original proton brake?
*
RM 1200 I can stay penang for another 3 nites d drool.gif

QUOTE(ngeo88 @ Jul 26 2011, 10:37 AM)
haiz.....  always missed you guys post pic....btw nice ported and polish job for CKT at G.hotel penang Xan .......


Added on July 26, 2011, 10:38 am
doh.gif
*
Port & Polish.. brows.gif I like that..

QUOTE(luenywoon @ Jul 26 2011, 10:44 AM)
Windscreen cover is so inconvenient..
*
That's the best solution to keep heat level in ur car low..

QUOTE(dorinyeah @ Jul 26 2011, 11:29 AM)
PnP not dig the cylinder wall and change larger piston meh? then wat it should call ah??
my fren told me PnP is make engine displacement bigger like 1.6 dig to 1.8 like tat...
*
Ha? dig cylinder wall & change larger piston?? rclxub.gif No such thing la sayang.. P&P is done by relocating the air intake flow path to make the air flow smoother & more optimum. Yes, u need to dig the cylinder wall a bit, but no piston replacement is required. The smoother & smaller degree of the bend before reaching the cylinder head eases the air flow into the engine..

QUOTE(dzie25 @ Jul 26 2011, 11:44 AM)
HI HI All,  I'm New To Persona.. just bought my Car Last Month ago ! At first Greatz to Thread 21yos !

I have a question, i'm having a B-Line, i thinking to change RIM+ Tayer.. so... original is 15inch .. how was the feed back on 16inch.. or no difference at all.......

Thanks !
*
Congrats.. Colour? Transmission? =)

16 inch gives a lighter steering feel & better handling & high speed stability compared to 15 inch, but 17 inch rims gives much better handling through corners.

QUOTE(unknownhammie @ Jul 26 2011, 12:18 PM)
Hmm, always say say only.. now want make it happen d...

Xan this weekend free? Salary out i pass to u then recommend extractor liao..

mau install...
*
Weekend ka? Friday boleh?

QUOTE(ngeo88 @ Jul 26 2011, 12:38 PM)
PnP got few stage lah, if wanna make bigger piston also can lah...but same as for CKT after so many PnP sure need to insatall bigeer valve due to the angine block HOLE become bigger and LOOSE .....
*
sweat.gif Bigger & loose rclxub.gif

QUOTE(Cavino @ Jul 26 2011, 02:45 PM)
Reading me makes me doubt Castrol Magnatec..

"In the additive package used in the manufacturing of lubricants, they have 2 main functions. They are 1. detergent package and 2. dispersant package. The additive in 1 is supposed to clean up all the "rubbish" like acids, carbon, rusts, water vapour generated from the combustion. Dispersant package is to disperse all the "rubbish" in the oil so that they are equally and completely disperse throughout/inside the oil. These "rubbish" if not disperse may clog or stick to the moving parts inside the engine. Also they may not be totally drained out during changing of the engine oil. Many people have a misconception if the engine oil drained out during the oil change is very black or dirty, the oil is not so good. Actually, the reverse is true. A good engine oil with good additive package will clear as much "rubbish" inside the engine during the oil change."

except taken from a supposedly ex-Castrol oil man in autoworld forum.
*
That means minyak masak that has been reused over & over again till it's pitch black is actually healthy for us? laugh.gif
Fubar20
post Jul 26 2011, 04:06 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(ngeo88 @ Jul 26 2011, 03:50 PM)
to be frank i never try the 0W oil yet  doh.gif  since Zeng and Xan here also not recomented and our Campro are enough rawh.....when using 5W-40 so not thingking to use it. biggrin.gif
*
I also never tried 0W-40 and 5W-40. But from the recommendations from forum, websites and also the data from Castrol made me want to try it for my 10 K service later.
QUOTE(dorinyeah @ Jul 26 2011, 03:52 PM)
when see this datasheet i rclxub.gif


Added on July 26, 2011, 3:53 pm
i think zeng gonna use this castro 0-40. if not mistaken...
*
So, u are the one who download it! laugh.gif
TSxandras
post Jul 26 2011, 04:07 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 26 2011, 04:06 PM)
I also never tried 0W-40 and 5W-40. But from the recommendations from forum, websites and also the data from Castrol made me want to try it for my 10 K service later.

So, u are the one who download it!  laugh.gif
*
5W-40 still ok lah.. 0W-40 a bit too thin.. Our engine in our Malaysian weather mana boleh tahan.. rclxub.gif
Fubar20
post Jul 26 2011, 04:13 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 04:07 PM)
5W-40 still ok lah.. 0W-40 a bit too thin.. Our engine in our Malaysian weather mana boleh tahan.. rclxub.gif
*
Up to you lah. tongue.gif The data is in front of your eyes. Like I said, 0W-40 or 5W-40 is still SAE 40 grade oil which
performed nearly same at 40 and 100 degree C.
KKW
post Jul 26 2011, 04:14 PM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(dorinyeah @ Jul 26 2011, 02:13 PM)
when u go service?
*
Soon lo smile.gif
Why?

QUOTE(Fubar20 @ Jul 26 2011, 02:14 PM)
0W-40 is Edge Sport and 5W-40 is Edge only. Both are fully synthetic.
Why you want to use fully to service at 5K? Isn't suppose to be semi? hmm.gif
Last week I saw 0W-40 and Magnatec 10W-40 Semi only at Shah Alam.
*
Suppose I aim to service at 10k..
That day I sleep in the car for 10hours..
So I plan to service my car earlier lo

QUOTE(ngeo88 @ Jul 26 2011, 02:26 PM)
5W-40 I'm using it RM165 1 month ago. tongue.gif
*
Mana beli? drool.gif
TSxandras
post Jul 26 2011, 04:19 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 26 2011, 04:13 PM)
Up to you lah. tongue.gif The data is in front of your eyes. Like I said, 0W-40 or 5W-40 is still SAE 40 grade oil which
performed nearly same at 40 and 100 degree C.
*
The performance of the engine oil is not what I'm worried about. It's the cold start protection.
luenywoon
post Jul 26 2011, 04:32 PM

New Member
*
Junior Member
30 posts

Joined: Mar 2007


Hey guys,

Anyone knows where to get the car opti coated??
And how much will it be roughly??

Pains of owning a white car sad.gif
TSxandras
post Jul 26 2011, 04:40 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(luenywoon @ Jul 26 2011, 04:32 PM)
Hey guys,

Anyone knows where to get the car opti coated??
And how much will it be roughly??

Pains of owning a white car  sad.gif
*
Sunway ada.. U can contact KC for it also.. He might be able to give u a special price..

The last I checked was RM 600 onwards for a whole car.. But forgot where I got that price from..
Cavino
post Jul 26 2011, 04:40 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(luenywoon @ Jul 26 2011, 04:32 PM)
Hey guys,

Anyone knows where to get the car opti coated??
And how much will it be roughly??

Pains of owning a white car  sad.gif
*
You can try Sierra Glow in Subang or somewhere, 5 years warranty, glass-based sealent protection...you just google it for more info. My neighbour just polished there for his new 2.0 Forte.

I'm using Magic Glare, a glass-plexin protection sealent but can last only 2 years before renewal.
TSxandras
post Jul 26 2011, 04:43 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Cavino @ Jul 26 2011, 04:40 PM)
You can try Sierra Glow in Subang or somewhere, 5 years warranty, glass-based sealent protection...you just google it for more info. My neighbour just polished there for his new 2.0 Forte.

I'm using Magic Glare, a glass-plexin protection sealent but can last only 2 years before renewal.
*
How much u did urs ah?
panda*Pan
post Jul 26 2011, 04:48 PM

Getting Started
**
Junior Member
117 posts

Joined: Jun 2008


hi guys....

i have a silly question....
in service book only stated servicing for 1K, 5K, 10K, 20K....etc etc....
so...can i do my 15K servicing outside?

will it affect my warranty??
KKW
post Jul 26 2011, 04:52 PM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(panda*Pan @ Jul 26 2011, 04:48 PM)
hi guys....

i have a silly question....
in service book only stated servicing for 1K, 5K, 10K, 20K....etc etc....
so...can i do my 15K servicing outside?

will it affect my warranty??
*
No.. Make sure you use back Proton Oil Filter..
I service my 15k outside as well smile.gif
ngeo88
post Jul 26 2011, 04:56 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(luenywoon @ Jul 26 2011, 04:32 PM)
Hey guys,

Anyone knows where to get the car opti coated??
And how much will it be roughly??

Pains of owning a white car  sad.gif
*
go find this guys he sell and very kind to teach how to use the optimum product, he run many demo for car detailing.
https://forum.lowyat.net/topic/1720414
panda*Pan
post Jul 26 2011, 04:57 PM

Getting Started
**
Junior Member
117 posts

Joined: Jun 2008


QUOTE(KKW @ Jul 26 2011, 04:52 PM)
No.. Make sure you use back Proton Oil Filter..
I service my 15k outside as well  smile.gif
*
Thanx for answering bro...
CoSE did quote me RM 250 for d 15K service, abit shock shakehead.gif sweat.gif

also CoSE reject to reflash my ECU coz it says already updated version....
d funny thing is when i complain bout gear upshift and downshift not responding, he sez its d ECU doh.gif doh.gif doh.gif

now thinking of installing GC and VS....will it help?? icon_question.gif icon_question.gif


This is all because of my bad experience going genting last 2 week....dang!! vmad.gif vmad.gif
Fubar20
post Jul 26 2011, 05:01 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(panda*Pan @ Jul 26 2011, 04:57 PM)
Thanx for answering bro...
CoSE did quote me RM 250 for d 15K service, abit shock  shakehead.gif  sweat.gif

also CoSE reject to reflash my ECU coz it says already updated version....
d funny thing is when i complain bout gear upshift and downshift not responding, he sez its d ECU  doh.gif  doh.gif  doh.gif

now thinking of installing GC and VS....will it help??  icon_question.gif  icon_question.gif
This is all because of my bad experience going genting last 2 week....dang!! vmad.gif  vmad.gif
*
What happened at Genting? You lose money or meet those 'underworld' fellas? laugh.gif
TSxandras
post Jul 26 2011, 05:06 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



Sien.. Hammie no reply..

TT this friday anyone?
panda*Pan
post Jul 26 2011, 05:16 PM

Getting Started
**
Junior Member
117 posts

Joined: Jun 2008


QUOTE(Fubar20 @ Jul 26 2011, 05:01 PM)
What happened at Genting? You lose money or meet those 'underworld' fellas?  laugh.gif
*
lolz....my car going uphill lor, it really disappoint me....
have to shift until 'L' myself.... cry.gif


ngeo88
post Jul 26 2011, 05:19 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(xandras @ Jul 26 2011, 05:06 PM)
Sien.. Hammie no reply..

TT this friday anyone?
*
mana ? hmm.gif
Fubar20
post Jul 26 2011, 05:21 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(panda*Pan @ Jul 26 2011, 05:16 PM)
lolz....my car going uphill lor, it really disappoint me....
have to shift until 'L' myself.... cry.gif
*
Sure or not? I go up with total three adults also no need to shift until L.
Or you went with three pigs or you carry some 'invisible' passenger? sweat.gif
TSxandras
post Jul 26 2011, 05:29 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ngeo88 @ Jul 26 2011, 05:19 PM)
mana ? hmm.gif
*
Not sure.. Let hammie call the shots.. brows.gif

QUOTE(Fubar20 @ Jul 26 2011, 05:21 PM)
Sure or not? I go up with total three adults also no need to shift until L.
Or you went with three pigs or you carry some 'invisible' passenger?  sweat.gif
*
laugh.gif Dun scare him la Fubar.. brows.gif

Gonna go genting to try my luck soon.. :/
ngeo88
post Jul 26 2011, 05:32 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
hmm......intresting info http://www.malaysian-gadgets.com/2011/07/p...global-car.html
Fubar20
post Jul 26 2011, 05:33 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 05:29 PM)
Not sure.. Let hammie call the shots.. brows.gif
laugh.gif Dun scare him la Fubar.. brows.gif

Gonna go genting to try my luck soon.. :/
*
To get more siham or more moolah? laugh.gif
ngeo88
post Jul 26 2011, 05:34 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(Fubar20 @ Jul 26 2011, 05:21 PM)
Sure or not? I go up with total three adults also no need to shift until L.
Or you went with three pigs or you carry some 'invisible' passenger?  sweat.gif
*
laugh.gif our PE can fin in 3 pig meh ? 3 little piggy can lah.....lol


Added on July 26, 2011, 5:36 pm
QUOTE(xandras @ Jul 26 2011, 05:29 PM)
Not sure.. Let hammie call the shots.. brows.gif
laugh.gif Dun scare him la Fubar.. brows.gif

Gonna go genting to try my luck soon.. :/
*
mega TT genting again drool.gif .....

This post has been edited by ngeo88: Jul 26 2011, 05:36 PM
jackyap84
post Jul 26 2011, 05:44 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(KKW @ Jul 26 2011, 01:45 PM)
The edge is 5-40W or 0-40W? hmm.gif
*
got 5-30?
TSxandras
post Jul 26 2011, 05:44 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ngeo88 @ Jul 26 2011, 05:32 PM)
Lets just hope so.. Hope it's not plagued by the same problems that haunted Malaysian drivers since the introduction of Proton Saga in the late 80s.. sweat.gif

QUOTE(Fubar20 @ Jul 26 2011, 05:33 PM)
To get more siham or more moolah?  laugh.gif
*
Moolah la... Siham I got 1 enough d.. Not so greedy.. smile.gif

QUOTE(ngeo88 @ Jul 26 2011, 05:34 PM)
laugh.gif  our PE can fin in 3 pig meh ?  3 little piggy can lah.....lol


Added on July 26, 2011, 5:36 pm
mega TT genting again  drool.gif .....
*
u wan try? We experiment with ur car 1st.. brows.gif
Fubar20
post Jul 26 2011, 05:47 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 05:44 PM)
Lets just hope so.. Hope it's not plagued by the same problems that haunted Malaysian drivers since the introduction of Proton Saga in the late 80s.. sweat.gif
Moolah la... Siham I got 1 enough d.. Not so greedy.. smile.gif
u wan try? We experiment with ur car 1st.. brows.gif
*
ngeo88 love to eat pork chop. drool.gif
raimy_m9
post Jul 26 2011, 05:50 PM

Getting Started
**
Junior Member
174 posts

Joined: Jun 2009
QUOTE(ngeo88 @ Jul 26 2011, 05:32 PM)
let's hope for it..btw last night i saw on press conference proton said they will reevaluate their vendor for this new global car..and 98% parts will be local..lets just hope that they loose all those crony thing..

ps: should i cancel my booking? since new r will launch in february?
panda*Pan
post Jul 26 2011, 05:51 PM

Getting Started
**
Junior Member
117 posts

Joined: Jun 2008


QUOTE(Fubar20 @ Jul 26 2011, 05:21 PM)
Sure or not? I go up with total three adults also no need to shift until L.
Or you went with three pigs or you carry some 'invisible' passenger?  sweat.gif
*
lolx....3 pig ar?
maybe lor, me myself ady 100 kg...+ my wife + 1 yr old daughter + MIL + SIL = 300 - 350 kg passenger...

dunno wat happen, maybe its because of my 10K+ OEM SP??


Added on July 26, 2011, 5:53 pm
QUOTE(ngeo88 @ Jul 26 2011, 05:34 PM)
laugh.gif  our PE can fin in 3 pig meh ?  3 little piggy can lah.....lol


Added on July 26, 2011, 5:36 pm
mega TT genting again  drool.gif .....
*
i still remember few years back when a guy fits a cow and a calf in a Perdana V6...
i tink sure can fit 3 pig in PE...hahaha biggrin.gif biggrin.gif biggrin.gif

This post has been edited by panda*Pan: Jul 26 2011, 05:53 PM
TSxandras
post Jul 26 2011, 05:59 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 26 2011, 05:47 PM)
ngeo88 love to eat pork chop.  drool.gif
*
drool.gif

QUOTE(raimy_m9 @ Jul 26 2011, 05:50 PM)
let's hope for it..btw last night i saw on press conference proton said they will reevaluate their vendor for this new global car..and 98% parts will be local..lets just hope that they loose all those crony thing..

ps: should i cancel my booking? since new r will launch in february?
*
If u can wait, sure, why not? smile.gif But do realise that there might possibly be a significant price difference between the PE now & Persona R. If money is not an issue & u can wait, just cancel ur booking & wait for the Persona R.

QUOTE(panda*Pan @ Jul 26 2011, 05:51 PM)
lolx....3 pig ar?
maybe lor, me myself ady 100 kg...+ my wife + 1 yr old daughter + MIL  + SIL = 300 - 350 kg passenger...

dunno wat happen, maybe its because of my 10K+ OEM SP??


Added on July 26, 2011, 5:53 pm
i still remember few years back when a guy fits a cow and a calf in a Perdana V6...
i tink sure can fit 3 pig in PE...hahaha  biggrin.gif  biggrin.gif  biggrin.gif
*
100 KG?? rclxub.gif U kungfu panda ka? blink.gif
azeotrope
post Jul 26 2011, 06:06 PM

New Member
*
Junior Member
25 posts

Joined: May 2009


QUOTE(panda*Pan @ Jul 26 2011, 05:16 PM)
lolz....my car going uphill lor, it really disappoint me....
have to shift until 'L' myself.... cry.gif
*
not enough speed to climb perhaps?
ngeo88
post Jul 26 2011, 06:12 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(Fubar20 @ Jul 26 2011, 05:47 PM)
ngeo88 love to eat pork chop.  drool.gif
*
you don't like to eat pork chop...... tongue.gif , but no pork chop look for me lah.....
panda*Pan
post Jul 26 2011, 06:13 PM

Getting Started
**
Junior Member
117 posts

Joined: Jun 2008


QUOTE(xandras @ Jul 26 2011, 05:59 PM)
drool.gif
If u can wait, sure, why not? smile.gif But do realise that there might possibly be a significant price difference between the PE now & Persona R. If money is not an issue & u can wait, just cancel ur booking & wait for the Persona R.
100 KG?? rclxub.gif U kungfu panda ka? blink.gif
*
hahahaha....now only u know biggrin.gif biggrin.gif biggrin.gif biggrin.gif
Cavino
post Jul 26 2011, 06:15 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(xandras @ Jul 26 2011, 04:43 PM)
How much u did urs ah?
*
RM480. 10% discount on renewal, 1.5 years later. oh...warranty is 1.5 but i always go after 2 years.
ngeo88
post Jul 26 2011, 06:15 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(panda*Pan @ Jul 26 2011, 06:13 PM)
hahahaha....now only u know  biggrin.gif  biggrin.gif  biggrin.gif  biggrin.gif
*
like your name panda..... laugh.gif
Cavino
post Jul 26 2011, 06:16 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(panda*Pan @ Jul 26 2011, 04:57 PM)
Thanx for answering bro...
CoSE did quote me RM 250 for d 15K service, abit shock  shakehead.gif  sweat.gif

also CoSE reject to reflash my ECU coz it says already updated version....
d funny thing is when i complain bout gear upshift and downshift not responding, he sez its d ECU  doh.gif  doh.gif  doh.gif

now thinking of installing GC and VS....will it help??  icon_question.gif  icon_question.gif
This is all because of my bad experience going genting last 2 week....dang!! vmad.gif  vmad.gif
*
Actually they have the option to void warranty if you service outside during the 2 years / 50k mileage period.
TSxandras
post Jul 26 2011, 06:17 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(azeotrope @ Jul 26 2011, 06:06 PM)
not enough speed to climb perhaps?
*
It's not really necessary to push it down to L la.. leaving ur gear at L is just locking ur gear from changing up..

QUOTE(ngeo88 @ Jul 26 2011, 06:12 PM)
you don't like to eat pork chop...... tongue.gif , but no pork chop look for me lah.....
*
U like? brows.gif

QUOTE(panda*Pan @ Jul 26 2011, 06:13 PM)
hahahaha....now only u know  biggrin.gif  biggrin.gif 
*
blink.gif

QUOTE(Cavino @ Jul 26 2011, 06:15 PM)
RM480. 10% discount on renewal, 1.5 years later. oh...warranty is 1.5 but i always go after 2 years.
*
Owh.. Not bad not bad..

QUOTE(ngeo88 @ Jul 26 2011, 06:15 PM)
like your name panda..... laugh.gif
*
Zzz.. He's kungfu panda.. Now we know..


Added on July 26, 2011, 6:21 pm
QUOTE(Cavino @ Jul 26 2011, 06:16 PM)
Actually they have the option to void warranty if you service outside during the 2 years / 50k mileage period.
*
Yes.. But that's also if they find out.. If u use original oil filter, they wouldn't know because there's a gap between the 10k & the 20k service..

This post has been edited by xandras: Jul 26 2011, 06:21 PM
Cavino
post Jul 26 2011, 06:27 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


On those glass-based sealent, its actually quite worth it if you always keep your car polish.

Yes, polishing yourself will be cheaper, but everytime you polish, if eats into your paint. The wax protection will wash off after a few car washes. How many times you need to polish and wax to keep car at tip-top protection and gloss at ALL times?

These glass-based sealent are a great gift to darn lazy ppl like me...professional polish (5 layers including claying, etc), then have a layer of hard glass sealent that protects against the environment, shiny like newly gloss after every car wash (with water or shampoo)..for 2 years to 5 years (depending on if magic or sierra).

Totally spend zero time to polish car for 2 years period and yet gloss and protection can anytime matched those who spends hundreds and thousands polishing car every other month. Swirl and light scratch can be dimmed or remove (coz got extra glass protection) with RM80 every half to one year...
stormaker
post Jul 26 2011, 06:30 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(Cavino @ Jul 26 2011, 06:15 PM)
RM480. 10% discount on renewal, 1.5 years later. oh...warranty is 1.5 but i always go after 2 years.
*
Unfortunately, im from east malaysia, so not much choice for me. Im being quoted RM350 for NanoCoat which only last for a year.

Do we still need to wax on top of the coating ? hmm.gif
Fubar20
post Jul 26 2011, 06:32 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(stormaker @ Jul 26 2011, 06:30 PM)
Unfortunately, im from east malaysia, so not much choice for me. Im being quoted RM350 for NanoCoat which only last for a year.

Do we still need to wax on top of the coating ?  hmm.gif
*
If you are lazy, can always use Meguirs Ultimate Quik Wax for waxing. Just spray and wipe it.

This post has been edited by Fubar20: Jul 26 2011, 06:33 PM
TSxandras
post Jul 26 2011, 06:34 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Cavino @ Jul 26 2011, 06:27 PM)
On those glass-based sealent, its actually quite worth it if you always keep your car polish.

Yes, polishing yourself will be cheaper, but everytime you polish, if eats into your paint. The wax protection will wash off after a few car washes. How many times you need to polish and wax to keep car at tip-top protection and gloss at ALL times?

These glass-based sealent are a great gift to darn lazy ppl like me...professional polish (5 layers including claying, etc), then have a layer of hard glass sealent that protects against the environment, shiny like newly gloss after every car wash (with water or shampoo)..for 2 years to 5 years (depending on if magic or sierra).

Totally spend zero time to polish car for 2 years period and yet gloss and protection can anytime matched those who spends hundreds and thousands polishing car every other month.  Swirl and light scratch can be dimmed or remove (coz got extra glass protection) with RM80 every half to one year...
*
hmm.gif True.. But I think it's worth more than polishing n waxing ur car (done by pros).. RM 480 is quite worth the money, considering standard waxing & polishing done by reputable car detailers would cost roughly around RM300+ onwards..
ngeo88
post Jul 26 2011, 06:39 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(xandras @ Jul 26 2011, 06:34 PM)
hmm.gif True.. But I think it's worth more than polishing n waxing ur car (done by pros).. RM 480 is quite worth the money, considering standard waxing & polishing done by reputable car detailers would cost roughly around RM300+ onwards..
*
check this out http://www.groupon.my/deals/klang-valley-k...207&a=715827975

TSxandras
post Jul 26 2011, 06:42 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ngeo88 @ Jul 26 2011, 06:39 PM)
laugh.gif not for me.. Not at least until my 159 is out.. Even then I'll be going only to meguair's to get it done..brows.gif
stormaker
post Jul 26 2011, 06:45 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(Fubar20 @ Jul 26 2011, 06:32 PM)
If you are lazy, can always use Meguirs Ultimate Quik Wax for waxing. Just spray and wipe it.
*
Will let the pro do it at the 1st time ... there after might diy. thumbup.gif
panda*Pan
post Jul 26 2011, 06:49 PM

Getting Started
**
Junior Member
117 posts

Joined: Jun 2008


QUOTE(Fubar20 @ Jul 26 2011, 06:32 PM)
If you are lazy, can always use Meguirs Ultimate Quik Wax for waxing. Just spray and wipe it.
*
Honestly bro, it does work....for few days of good weather.....
after dat, same old same old.....

i used this and for me its not really helping.....wasted cry.gif cry.gif
jackyap84
post Jul 26 2011, 06:51 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(xandras @ Jul 26 2011, 05:59 PM)
drool.gif
If u can wait, sure, why not? smile.gif But do realise that there might possibly be a significant price difference between the PE now & Persona R. If money is not an issue & u can wait, just cancel ur booking & wait for the Persona R.
100 KG?? rclxub.gif U kungfu panda ka? blink.gif
*
me alone almost 100kg lor... brows.gif
Cavino
post Jul 26 2011, 06:51 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(stormaker @ Jul 26 2011, 06:30 PM)
Unfortunately, im from east malaysia, so not much choice for me. Im being quoted RM350 for NanoCoat which only last for a year.

Do we still need to wax on top of the coating ?  hmm.gif
*
Err..whats the point of nanocoating if you need to put wax some more...
Fubar20
post Jul 26 2011, 06:52 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(panda*Pan @ Jul 26 2011, 06:49 PM)
Honestly bro, it does work....for few days of good weather.....
after dat, same old same old.....

i used this and for me its not really helping.....wasted  cry.gif  cry.gif
*
What happened? For mine, even after few days of rain also can see the water beading compare with no waxing.
Cavino
post Jul 26 2011, 06:52 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(jackyap84 @ Jul 26 2011, 06:51 PM)
me alone almost 100kg lor...  brows.gif
*
Aiyo like that don't wait for R lor....surely suspension harder wan...you need something that will soften the ride.. blush.gif
TSxandras
post Jul 26 2011, 06:53 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jackyap84 @ Jul 26 2011, 06:51 PM)
me alone almost 100kg lor...  brows.gif
*
Wah.. looks like PPLYN got quite a number of World Heavyweight Champions hor.. brows.gif

Btw, news just broke out that there's someone in Malaysia who bought a private yacht plated with 100 tons of gold for 3 BILLION UK pounds.

wink.gif

Sounds like someone familiar?
ngeo88
post Jul 26 2011, 06:54 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
hmm.gif anyone going to test drive FLX with CVT thinking to test drive this weekend.... tongue.gif
TSxandras
post Jul 26 2011, 06:54 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Cavino @ Jul 26 2011, 06:51 PM)
Err..whats the point of nanocoating if you need to put wax some more...
*
Exactly.. sweat.gif

QUOTE(Fubar20 @ Jul 26 2011, 06:52 PM)
What happened? For mine, even after few days of rain also can see the water beading compare with no waxing.
*
His car everyday kena tsunami wan.. brows.gif

QUOTE(Cavino @ Jul 26 2011, 06:52 PM)
Aiyo like that don't wait for R lor....surely suspension harder wan...you need something that will soften the ride.. blush.gif
*
A girl in the ride would definitely soften everything for me brows.gif Except one thing that would stand still through all day all night.. brows.gif
Cavino
post Jul 26 2011, 06:55 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(xandras @ Jul 26 2011, 06:53 PM)
Wah.. looks like PPLYN got quite a number of World Heavyweight Champions hor.. brows.gif

Btw, news just broke out that there's someone in Malaysia who bought a private yacht plated with 100 tons of gold for 3 BILLION UK pounds.

wink.gif

Sounds like someone familiar?
*
Old news liao...

Just read the safety data sheet of my City's Idemitsu Extreme Eco Fully Syn.....Mineral oil 90.99...not sure if I read it wrongly...but isn't that semi...
Fubar20
post Jul 26 2011, 06:55 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 06:53 PM)
Wah.. looks like PPLYN got quite a number of World Heavyweight Champions hor.. brows.gif

Btw, news just broke out that there's someone in Malaysia who bought a private yacht plated with 100 tons of gold for 3 BILLION UK pounds.

wink.gif

Sounds like someone familiar?
*
Slowpoke lah you. The news came out a few days ago.
Maybe the shagging at Penang make you lose ur memory? brows.gif
ngeo88
post Jul 26 2011, 06:56 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(xandras @ Jul 26 2011, 06:53 PM)
Wah.. looks like PPLYN got quite a number of World Heavyweight Champions hor.. brows.gif

Btw, news just broke out that there's someone in Malaysia who bought a private yacht plated with 100 tons of gold for 3 BILLION UK pounds.

wink.gif

Sounds like someone familiar?
*
ya see the pic from hong kong news yesterday, originaly he wan to build a plane but the gold is too heavy so he build yacht.... flex.gif

This post has been edited by ngeo88: Jul 26 2011, 06:58 PM
TSxandras
post Jul 26 2011, 06:58 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Cavino @ Jul 26 2011, 06:55 PM)
Old news liao...

Just read the safety data sheet of my City's Idemitsu Extreme Eco Fully Syn.....Mineral oil 90.99...not sure if I read it wrongly...but isn't that semi...
*
Well, yes.. I was lost in transition of time while my geoduck is working hard pounding it's way to it's glory.. brows.gif

QUOTE(Fubar20 @ Jul 26 2011, 06:55 PM)
Slowpoke lah you. The news came out a few days ago.
Maybe the shagging at Penang make you lose ur memory? brows.gif
*
I didn't get to check the news at all dude. But yet, nobody talked about it here so I bring it up lo.. brows.gif

QUOTE(ngeo88 @ Jul 26 2011, 06:56 PM)
ya see the pic from hong kong news yesterday
*
hmm.gif Lets go steal some gold!! brows.gif

This post has been edited by xandras: Jul 26 2011, 06:59 PM
stormaker
post Jul 26 2011, 06:59 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(Cavino @ Jul 26 2011, 06:51 PM)
Err..whats the point of nanocoating if you need to put wax some more...
*
QUOTE(xandras @ Jul 26 2011, 06:54 PM)
Exactly.. sweat.gif
for extra kiasu protection .. maybe ... tongue.gif

like that going to skip the waxing liao ... Is Rainaway NanoCoat (premium) good ? Same with Magic Glare ?
TSxandras
post Jul 26 2011, 07:01 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(stormaker @ Jul 26 2011, 06:59 PM)
for extra kiasu protection .. maybe ...  tongue.gif

like that going to skip the waxing liao ... Is Rainaway NanoCoat (premium) good ? Same with Magic Glare ?
*
laugh.gif Kiasu protection.. Go get it done quickly for peace of mind.. brows.gif
stormaker
post Jul 26 2011, 07:13 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(xandras @ Jul 26 2011, 07:01 PM)
laugh.gif Kiasu protection.. Go get it done quickly for peace of mind.. brows.gif
*
Yup this Sunday, after done the 1K service this Saturday ... biggrin.gif
roy2005
post Jul 26 2011, 07:25 PM

New Member
*
Newbie
0 posts

Joined: Jul 2010
From PE's brochure, "Immobiliser" = ?
A card type thing?
TSxandras
post Jul 26 2011, 07:27 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(roy2005 @ Jul 26 2011, 07:25 PM)
From PE's brochure, "Immobiliser" = ?
A card type thing?
*
No. It's a chip in ur key that allows u to start ur car engine. Without a similar chip, if ur key is duplicated ur car wont start.
Cavino
post Jul 26 2011, 07:30 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(stormaker @ Jul 26 2011, 06:59 PM)
for extra kiasu protection .. maybe ...  tongue.gif

like that going to skip the waxing liao ... Is Rainaway NanoCoat (premium) good ? Same with Magic Glare ?
*
If you look at the specs for NanoCoat premium (3 months) or diamond (12 months). They are quite different from glass-based coating. Both emphasize different aspects with similar strength.

Yours are polymer based while sierra and magic is glass based. Yours deflect water for 12 months (diamond) while glass-based deflect for 2-5 years. Overall I would call this inferior to glass-based coating. Glass based coating emphasize on providing mirror like finish that lasted for 2-5 years. Yes, I can see myself especially for black colored vehicle. There is no mentioned of mirror finishing tho high luster gloss like newly polish got...but how long can sustained. At least for magic glare, I used 5 years liao...still shiny.

It mentioned also "keep strong performance by only dry polishing"....whats that..need to polish some more?


Glass-based sealent usually form a very hard (sierra) glass sealent that protects even against very minor scratch (it had to penetrate the sealent to reach the paint below)...although I kena scratch left and right also...but all can be dimmed or disappeared unless it cuts deeper.

Better check with them all these points to ensure you know what you got by using their service. I think the strength is mostly keep water away...but so is the glass-based sealent, tho somehow it was not mention in their specs as their strength.

This post has been edited by Cavino: Jul 26 2011, 07:36 PM
roy2005
post Jul 26 2011, 07:30 PM

New Member
*
Newbie
0 posts

Joined: Jul 2010
QUOTE(xandras @ Jul 26 2011, 07:27 PM)
No. It's a chip in ur key that allows u to start ur car engine. Without a similar chip, if ur key is duplicated ur car wont start.
*
Oh, I thought it was like a card, so when someone drive ur car w/o it, engine will shut off half way.
TSxandras
post Jul 26 2011, 07:31 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(roy2005 @ Jul 26 2011, 07:30 PM)
Oh, I thought it was like a card, so when someone drive ur car w/o it, engine will shut off half way.
*
laugh.gif No, it doesn't work that way. Proton's technology havent gotten that far yet. laugh.gif
Cavino
post Jul 26 2011, 07:33 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(xandras @ Jul 26 2011, 07:31 PM)
laugh.gif No, it doesn't work that way. Proton's technology havent gotten that far yet. laugh.gif
*
For that matter, most cars in market don't go that far including Hondas and mid-range Toyotas...all using chip in key only to prevent car from starting only...
stormaker
post Jul 26 2011, 07:35 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(Cavino @ Jul 26 2011, 07:30 PM)
If you look at the specs for NanoCoat premium (3 months) or diamond (12 months). They are quite different from glass-based coating. Both emphasize different aspects with similar strength.

Yours are polymer based while sierra and magic is glass based. Yours deflect water for 12 months (diamond) while glass-based deflect for 2-5 years. Overall I would call this inferior to glass-based coating. Glass based coating emphasize on providing mirror like finish that lasted for 2-5 years. Yes, I can see myself especially for black colored vehicle. There is no mentioned of mirror finishing tho high luster gloss like newly polish got...but how long can sustained. At least for magic glare, I used 5 years liao...still shiny.

It mentioned also "keep strong performance by only dry polishing"....whats that..need to polish some more?
Glass-based sealent usually form a very hard (sierra) glass sealent that protects even against very minor scratch (it had to penetrate the sealent to reach the paint below)...although I kena scratch left and right also...but all can be dimmed or disappeared unless it cuts deeper. 

Better check with them all these points to ensure you know what you got by using their service.
*
Haih ... i searched around for weeks, NanoCoat so far is the best product i found in Sarawak.... sad.gif how i wish i can find car detailer using magic glare b4 sunday.


TSxandras
post Jul 26 2011, 07:36 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Cavino @ Jul 26 2011, 07:33 PM)
For that matter, most cars in market don't go that far including Hondas and mid-range Toyotas...all using chip in key only to prevent car from starting only...
*
Actually there is.. For the Honda Accord CL9 there IS keyless entry.. Just that Hondas & Toyotas doesn't include it in their products in Malaysian market..
Cavino
post Jul 26 2011, 07:38 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(stormaker @ Jul 26 2011, 07:35 PM)
Haih ... i searched around for weeks, NanoCoat so far is the best product i found in Sarawak....  sad.gif how i wish i can find car detailer using magic glare b4 sunday.
*
Use the best you could find lor...this is better than nothing. But check if require periodically polishing...this can be a hidden cost.
roy2005
post Jul 26 2011, 07:38 PM

New Member
*
Newbie
0 posts

Joined: Jul 2010
QUOTE(Cavino @ Jul 26 2011, 07:33 PM)
For that matter, most cars in market don't go that far including Hondas and mid-range Toyotas...all using chip in key only to prevent car from starting only...
*
Being forgetful, at least i won't be stuck middle of the road when i forget to bring it.
Or worse, being treated like a thief driving my own car.
Cavino
post Jul 26 2011, 07:39 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(xandras @ Jul 26 2011, 07:36 PM)
Actually there is.. For the Honda Accord CL9 there IS keyless entry.. Just that Hondas & Toyotas doesn't include it in their products in Malaysian market..
*
So is forte....but not hondas and mid-range toyotas in malaysia...cheapskate.
wan arif
post Jul 26 2011, 07:39 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2010
my engine..the power stereeng pipe that thought cause the kncking sound..

this is my engine bay car..

Attached Image


and this is the picture i get at our v10..

Attached Image


what do u think..different pipe that had been put rubber hose originaly by proton..do u think the reason of the noise still the pipe..cause the noise come from front left..not front right..the pipe in the rite of engine..

thank u..just two month n my first car actually..i rely worried n hate when the noise came out..

sory for my englishhhh blush.gif

This post has been edited by wan arif: Jul 26 2011, 07:44 PM
Cavino
post Jul 26 2011, 07:39 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(roy2005 @ Jul 26 2011, 07:38 PM)
Being forgetful, at least i won't be stuck middle of the road when i forget to bring it.
Or worse, being treated like a thief driving my own car.
*
I don't think you can start your car without the card..
TSxandras
post Jul 26 2011, 07:40 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(roy2005 @ Jul 26 2011, 07:38 PM)
Being forgetful, at least i won't be stuck middle of the road when i forget to bring it.
Or worse, being treated like a thief driving my own car.
*
Well.. Usually if there is keyless entry system, they'll pair it with ur car key.. If u can forget to bring ur car alarm remote, im sure u wont forget to bring ur key, rite? Without the key u cant even start the car.. laugh.gif


Added on July 26, 2011, 7:41 pm
QUOTE(Cavino @ Jul 26 2011, 07:39 PM)
So is forte....but not hondas and mid-range toyotas in malaysia...cheapskate.
*
wink.gif Dono.. Got money, everything nice.. No money, everything also not nice.. rclxub.gif

This post has been edited by xandras: Jul 26 2011, 07:41 PM
Josh_M
post Jul 26 2011, 07:49 PM

Regular
******
Senior Member
1,604 posts

Joined: Aug 2009
From: Kuala Lumpur
checking in after 9 pages. Guys need advice i hear sound similar to the IAFM faulty module while im sitting inside the car and the gear is engaged.. If put it in "N" then o sound anyone faced this b4.
TSxandras
post Jul 26 2011, 07:51 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Josh_M @ Jul 26 2011, 07:49 PM)
checking in after 9 pages. Guys need advice i hear sound similar to the IAFM faulty module while im sitting inside the car and the gear is engaged.. If put it in "N" then o sound anyone faced this b4.
*
The sound should be consistent if it's IAFM noise. It'll be there whether or not ur gear is in D, and the noise will gradually go away or fade a little when the engine warms up.
Josh_M
post Jul 26 2011, 07:53 PM

Regular
******
Senior Member
1,604 posts

Joined: Aug 2009
From: Kuala Lumpur
QUOTE(xandras @ Jul 26 2011, 07:51 PM)
The sound should be consistent if it's IAFM noise. It'll be there whether or not ur gear is in D, and the noise will gradually go away or fade a little when the engine warms up.
*
o0o ok.. but then what might be the sound that im hearing... it was very clear today morning while on the way to LCCT..


TSxandras
post Jul 26 2011, 08:03 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Josh_M @ Jul 26 2011, 07:53 PM)
o0o ok.. but then what might be the sound that im hearing...  it was very clear today morning while on the way to LCCT..
*
Hmm.. How does it sound like? Perhaps u can record n upload it..


Added on July 26, 2011, 8:06 pm
QUOTE(wan arif @ Jul 26 2011, 07:39 PM)
my engine..the power stereeng pipe that thought cause the kncking sound..

this is my engine bay car..

Attached Image
and this is the picture i get at our v10..

Attached Image
what do u think..different pipe that had been put rubber hose originaly by proton..do u think the reason of the noise still the pipe..cause the noise come from front left..not front right..the pipe in the rite of engine..

thank u..just two month n my first car actually..i rely worried n hate when the noise came out..

sory for my englishhhh  blush.gif
*
The solution doesn't permanently remove the noise from ur car. The noise will be back after some time. I know mine did, even after I replaced the rubber hose at CoSE.

This post has been edited by xandras: Jul 26 2011, 08:06 PM
unknownhammie
post Jul 26 2011, 08:10 PM

Casual
***
Junior Member
399 posts

Joined: Aug 2008
From: Hell


QUOTE(xandras @ Jul 26 2011, 05:06 PM)
Sien.. Hammie no reply..

TT this friday anyone?
*
pm la..kns i lazy open read 1 by 1 post... damn sien.


Friday no free... got birthday outing. hahaha
wan arif
post Jul 26 2011, 08:11 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2010
QUOTE(xandras @ Jul 26 2011, 08:03 PM)
Hmm.. How does it sound like? Perhaps u can record n upload it..


Added on July 26, 2011, 8:06 pm
The solution doesn't permanently remove the noise from ur car. The noise will be back after some time. I know mine did, even after I replaced the rubber hose at CoSE.
*
ermm.. u mean even put the rubber hose still have sound..?
Cavino
post Jul 26 2011, 08:12 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


QUOTE(Josh_M @ Jul 26 2011, 07:53 PM)
o0o ok.. but then what might be the sound that im hearing...  it was very clear today morning while on the way to LCCT..
*
Is it there when you're idling? If you accelerate especially on a smooth ride and hear a soft aeroplane sound and those sound disappear when idling, then should be normal.
Josh_M
post Jul 26 2011, 08:19 PM

Regular
******
Senior Member
1,604 posts

Joined: Aug 2009
From: Kuala Lumpur
QUOTE(xandras @ Jul 26 2011, 08:03 PM)
Hmm.. How does it sound like? Perhaps u can record n upload it..


*
will record and upload soon..

QUOTE(Cavino @ Jul 26 2011, 08:12 PM)
Is it there when you're idling? If you accelerate especially on a smooth ride and hear a soft aeroplane sound and those sound disappear when idling, then should be normal.
*
yup it is there when idling.. nope no smooth aeroplane sound but the sound seems to be a bit softer when the car is moving...
jasonloh7906
post Jul 26 2011, 08:22 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(dorinyeah @ Jul 26 2011, 08:38 AM)
Haha... HID will kena block so better dun go for HID.... LED rclxms.gif
so where u buy ur LED? can share?


Added on July 26, 2011, 8:41 amcoming thursday i go Cose 10am, who want join me?
*
led might not be bright enuf for headlamp.
i bought it here.
http://forum.lowyat.net/index.php?showtopic=1838899&hl=
but actually the led quality i think not very good brand one. the clip is not really nice. but i tape it with something. so far no loose lah. i also bought the daylight from him.

QUOTE(Cavino @ Jul 26 2011, 09:49 AM)
Ya lor ya lor...I always *** those ppl with HID without projector lights...damn glaring, almost knock into them. If only I drove a big lorry, I WILL purposely knock into them, then blame them for illegally installing HID..

Installing HID without projector is very uncool. Every time I see ppl with this setup, instead of thinking how cool is those white light, my thought is, "so cheap skate kah...got money install HID, no money to mod a projector light....if want to fcuk, don't fcuk halfway...no song wan, better not do it at all"
*
yaya~~agree. i might change my foglight to ccfl but dunno fit or not.

QUOTE(dzie25 @ Jul 26 2011, 11:44 AM)
HI HI All,  I'm New To Persona.. just bought my Car Last Month ago ! At first Greatz to Thread 21yos !

I have a question, i'm having a B-Line, i thinking to change RIM+ Tayer.. so... original is 15inch .. how was the feed back on 16inch.. or no difference at all.......

Thanks ! rclxms.gif
*
welcome welcome. hmm...16" should be nice XD

QUOTE(KKW @ Jul 26 2011, 01:01 PM)
Guys,
Did castrol got any promotion?
I planning to change my engine oil earlier..
*
which area u in?? there is a roadshow for castrol in tebrau jusco if u are in JB.

QUOTE(panda*Pan @ Jul 26 2011, 05:16 PM)
lolz....my car going uphill lor, it really disappoint me....
have to shift until 'L' myself.... cry.gif
*
cannot be lah~~ur car got problem is it?? how much u throttle??
Cavino
post Jul 26 2011, 08:24 PM

Enthusiast
*****
Senior Member
842 posts

Joined: May 2009


Any of you experience something like steering column clanking when going on very rough road or bumps...
TSxandras
post Jul 26 2011, 08:28 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(wan arif @ Jul 26 2011, 08:11 PM)
ermm.. u mean even put the rubber hose still have sound..?
*
The rubber hose works, but only for a while. After a few months the noise will be back.. Still not sure why..

QUOTE(Josh_M @ Jul 26 2011, 08:19 PM)
will record and upload soon..
yup it is there when idling..  nope no smooth aeroplane sound but the sound seems to be a bit softer when the car is moving...
*
Hmm.. The sound should be louder when u accelerate if it's IAFM problem..

QUOTE(jasonloh7906 @ Jul 26 2011, 08:22 PM)
led might not be bright enuf for headlamp.
i bought it here.
http://forum.lowyat.net/index.php?showtopic=1838899&hl=
but actually the led quality i think not very good brand one. the clip is not really nice. but i tape it with something. so far no loose lah. i also bought the daylight from him.
yaya~~agree. i might change my foglight to ccfl but dunno fit or not.
welcome welcome. hmm...16" should be nice XD
which area u in?? there is a roadshow for castrol in tebrau jusco if u are in JB.
cannot be lah~~ur car got problem is it?? how much u throttle??
*
CCFL? Can gua.. custom make lo..

QUOTE(Cavino @ Jul 26 2011, 08:24 PM)
Any of you experience something like steering column clanking when going on very rough road or bumps...
*
Clanking? Like how? We all know about the steering assembly noise, but I don't quite understand what u mean by steering column clanking..
Dav6534
post Jul 26 2011, 08:32 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ZenGTMM @ Jul 26 2011, 01:42 AM)
From now on u will always rmb who contributed the first night fark for u with ur CKT in Penang.
U wanna know? Lets say its equivalent to ckdenion's engine.
*
lol. that sounds bad..very bad in fact. haha
wan arif
post Jul 26 2011, 09:01 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2010
QUOTE(xandras @ Jul 26 2011, 08:28 PM)
The rubber hose works, but only for a while. After a few months the noise will be back.. Still not sure why..
*
its that so...hmmm...thinking what happen next..
jackyap84
post Jul 26 2011, 09:02 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(wan arif @ Jul 26 2011, 07:39 PM)
my engine..the power stereeng pipe that thought cause the kncking sound..

this is my engine bay car..

Attached Image
and this is the picture i get at our v10..

Attached Image
what do u think..different pipe that had been put rubber hose originaly by proton..do u think the reason of the noise still the pipe..cause the noise come from front left..not front right..the pipe in the rite of engine..

thank u..just two month n my first car actually..i rely worried n hate when the noise came out..

sory for my englishhhh  blush.gif
*
the knocking sound come back again after 3-4 months after changed the power steering assembly... i also dont know what cause it... wondering too...
wan arif
post Jul 26 2011, 09:03 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2010
QUOTE(jackyap84 @ Jul 26 2011, 09:02 PM)
the knocking sound come back again after 3-4 months after changed the power steering assembly... i also dont know what cause it... wondering too...
*
there is no solution....just be imunnn with it.......how sad...
vccy
post Jul 26 2011, 09:33 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(jackyap84 @ Jul 26 2011, 10:02 PM)
the knocking sound come back again after 3-4 months after changed the power steering assembly... i also dont know what cause it... wondering too...
*
mine ok oh after they change for me. Just haven go and claim my ifam problem.

Today sui, my car dono how got a wood cucuk my front right side tyre. Whole tyre flat and i am driving quite fast, and feel quite bumpy. When i drop by at car wash to wash car when come out and look. Straight WTF. have to mafan the worker to help me change for me although i insist to change myself. The rim and nuts so hot due to gese-gesek.

My tyre cannot repair need to change a new one cos the wood cucuk at the side wall of the tyre. wtf waste another Rm225. doh.gif
redjinx
post Jul 26 2011, 09:33 PM

Getting Started
**
Junior Member
84 posts

Joined: Mar 2010
knocking sound...will b music for my ears many years to come sad.gif sad.gif
ngeo88
post Jul 26 2011, 09:36 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(vccy @ Jul 26 2011, 09:33 PM)
mine ok oh after they change for me. Just haven go and claim my ifam problem.

Today sui, my car dono how got a wood cucuk my front right side tyre. Whole tyre flat and i am driving quite fast, and feel quite bumpy. When i drop by at car wash to wash car when come out and look. Straight WTF. have to mafan the worker to help me change for me although i insist to change myself. The rim and nuts so hot due to gese-gesek.

My tyre cannot repair need to change a new one cos the wood cucuk at the side wall of the tyre. wtf waste another Rm225. doh.gif
*
why so expansive change what tyer u change ? you get a new one why not second hand tyer fist wait after all 4 botak then only change all new.
TSxandras
post Jul 26 2011, 09:39 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 09:33 PM)
mine ok oh after they change for me. Just haven go and claim my ifam problem.

Today sui, my car dono how got a wood cucuk my front right side tyre. Whole tyre flat and i am driving quite fast, and feel quite bumpy. When i drop by at car wash to wash car when come out and look. Straight WTF. have to mafan the worker to help me change for me although i insist to change myself. The rim and nuts so hot due to gese-gesek.

My tyre cannot repair need to change a new one cos the wood cucuk at the side wall of the tyre. wtf waste another Rm225. doh.gif
*
Wah what tyre RM 225? continental cc5?laugh.gif
wan arif
post Jul 26 2011, 09:45 PM

New Member
*
Junior Member
44 posts

Joined: Sep 2010
QUOTE(redjinx @ Jul 26 2011, 09:33 PM)
knocking sound...will b music for my ears many years to come  sad.gif  sad.gif
*
get the music loud...haha

vccy
post Jul 26 2011, 10:05 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(ngeo88 @ Jul 26 2011, 10:36 PM)
why so expansive change what tyer u change ? you get a new one why not second hand tyer fist wait after all 4 botak then only change all new.
*
new one cos just change my 4 tyre only for about 3 weeks. =.=

QUOTE(xandras @ Jul 26 2011, 10:39 PM)
Wah what tyre RM 225? continental cc5?laugh.gif
*
yeah cc5. I think is 225 or less la. Just read at the booklet but dono the boss la cos my company got acc here and they straight claim with the company. Then only go talk with company lo. Change tyre. *** doh.gif
TSxandras
post Jul 26 2011, 10:06 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 10:05 PM)
new one cos just change my 4 tyre only for about 3 weeks. =.=
yeah cc5. I think is 225 or less la. Just read at the booklet but dono the boss la cos my company got acc here and they straight claim with the company. Then only go talk with company lo. Change tyre. ***  doh.gif
*
Oh.. Then the price reasonable la..smile.gif
vccy
post Jul 26 2011, 10:08 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


Bro xan how you edit your signature to size and color? cos i try many way but i won appear as i want.

I want to make bigger font and color. how to make it? Seldom use this function. sweat.gif
TSxandras
post Jul 26 2011, 10:11 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 10:08 PM)
Bro xan how you edit your signature to size and color? cos i try many way but i won appear as i want.

I want to make bigger font and color. how to make it? Seldom use this function.  sweat.gif
*
Ur coding got problem. U should end ur code with [/size] instead of [size=7].
vccy
post Jul 26 2011, 10:14 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(xandras @ Jul 26 2011, 11:11 PM)
Ur coding got problem. U should end ur code with [/size] instead of [size=7].
*
i am using guide mode. sweat.gif Plan to sell of my open pod air filter. laugh.gif

BTW thanks.

This post has been edited by vccy: Jul 26 2011, 10:16 PM
TSxandras
post Jul 26 2011, 10:16 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 10:14 PM)
i am using guide mode.  sweat.gif  Plan to sell of my open pod air filter.  laugh.gif
*
haha... LoLs.. I manually type codings.. Just click close all tags once u're done.. =)
vccy
post Jul 26 2011, 10:19 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


Bro xan, do PnP will improve FC or not? And how much is the cost? tongue.gif
jackyap84
post Jul 26 2011, 10:22 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(wan arif @ Jul 26 2011, 09:03 PM)
there is no solution....just be imunnn with it.......how sad...
*
mean that this is the feedback from proton? memang itu macam punya?
TSxandras
post Jul 26 2011, 10:24 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 10:19 PM)
Bro xan, do PnP will improve FC or not? And how much is the cost?  tongue.gif
*
PnP? depends on where u go to do lo.. Some real professional can charge u up to RM 1800-2000 for a PnP job.. If u want it quick, they'll just swap in a ported head for u.. If not, u have to leave ur car there for a few days for them to get it done.. by PnP it improves power & FC.. For our auto PE, PnP can increase up to 10 HP..
vccy
post Jul 26 2011, 10:26 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(xandras @ Jul 26 2011, 11:24 PM)
PnP? depends on where u go to do lo.. Some real professional can charge u up to RM 1800-2000 for a PnP job.. If u want it quick, they'll just swap in a ported head for u.. If not, u have to leave ur car there for a few days for them to get it done.. by PnP it improves power & FC.. For our auto PE, PnP can increase up to 10 HP..
*
1800-2000 is a big sum. shocking.gif really need to save hard lo.
TSxandras
post Jul 26 2011, 10:28 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 10:26 PM)
1800-2000 is a big sum.  shocking.gif really need to save hard lo.
*
laugh.gif Take ur time.. Mods can wait.. But if u hungry n need food/siham, that cant wait.. brows.gif
ckdenion
post Jul 26 2011, 10:29 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(ZenGTMM @ Jul 26 2011, 01:42 AM)
From now on u will always rmb who contributed the first night fark for u with ur CKT in Penang.
U wanna know? Lets say its equivalent to ckdenion's engine.
*
QUOTE(xandras @ Jul 26 2011, 01:47 AM)
sweat.gif not first nite fark la.. 1st nite of the 3-nite ordeal at Penang..xD but thanks bro..brows.gif

blink.gif where got so teruk.. Denion's case whole Siham have to change d wan.. XD
*
QUOTE(ZenGTMM @ Jul 26 2011, 02:09 AM)
yeah mah first nite in Penang fark.. XD..
Denion case Siham cracked and gone.. Must be geoduck too big.
Normally increase a bit.. Increase by 2-3psi.
*
i heard my name...AGAIN... biggrin.gif
samwongjyhhorng
post Jul 26 2011, 10:30 PM

New Member
*
Junior Member
10 posts

Joined: Jun 2010


QUOTE(vccy @ Jul 26 2011, 10:19 PM)
Bro xan, do PnP will improve FC or not? And how much is the cost?  tongue.gif
*
around RM1200 for stage 2 tongue.gif plan do it on next year
TSxandras
post Jul 26 2011, 10:31 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



Anyway.. I'm currently trying to squeeze more miles out of my tankful of petrol.. It's Shell 95 this time. I know, I know about all the bad reviews & even experience that I've had with it, but I just had to try. A full tank of Shell 95 at Penang till KL 1/2 tank, travelled a total of 320 KMs. On meter shows I still have around 270KMs to go, but not sure if that's reliable. Trying to be really light footed, in town driving not more than 80 KM/h & on highway not more than 120.. Once finished will post how far I travelled with it.. smile.gif


Added on July 26, 2011, 10:32 pm
QUOTE(ckdenion @ Jul 26 2011, 10:29 PM)
i heard my name...AGAIN... biggrin.gif
*
laugh.gif U popular lo.. Legendary liao.. brows.gif

This post has been edited by xandras: Jul 26 2011, 10:32 PM
vccy
post Jul 26 2011, 10:33 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(xandras @ Jul 26 2011, 11:28 PM)
laugh.gif Take ur time.. Mods can wait.. But if u hungry n need food/siham, that cant wait.. brows.gif
*
Don worry bro. Eating siham quite often~~~~~. Ops tongue.gif

QUOTE(ckdenion @ Jul 26 2011, 11:29 PM)
i heard my name...AGAIN... biggrin.gif
*
you are the most famous PE user here ma. The most chosen and legend one laugh.gif
ckdenion
post Jul 26 2011, 10:33 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(xandras @ Jul 26 2011, 10:31 PM)
Anyway.. I'm currently trying to squeeze more miles out of my tankful of petrol.. It's Shell 95 this time. I know, I know about all the bad reviews & even experience that I've had with it, but I just had to try. A full tank of Shell 95 at Penang till KL 1/2 tank, travelled a total of 320 KMs. On meter shows I still have around 270KMs to go, but not sure if that's reliable. Trying to be really light footed, in town driving not more than 80 KM/h & on highway not more than 120.. Once finished will post how far I travelled with it.. smile.gif


Added on July 26, 2011, 10:32 pm
laugh.gif U popular lo.. Legendary liao.. brows.gif
*
the meter always show the IDEAL distance left to travel but i always get lesser than that...
with the petrol alarm blinking then can la...it will only become -.- when it is less than 50km...
so still can drive another 50km or slightly more...
xan...if the petrol alarm blinking...then by driving in tat state will damage d fuel pump?
TSxandras
post Jul 26 2011, 10:36 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ckdenion @ Jul 26 2011, 10:33 PM)
the meter always show the IDEAL distance left to travel but i always get lesser than that...
with the petrol alarm blinking then can la...it will only become -.- when it is less than 50km...
so still can drive another 50km or slightly more...
xan...if the petrol alarm blinking...then by driving in tat state will damage d fuel pump?
*
That's because the meter fluctuates according to ur fuel needle. If u dun believe, park ur car downhill & ur fuel needle will go up a little, then the distance meter will also increase..
Fubar20
post Jul 26 2011, 10:37 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 10:31 PM)

Added on July 26, 2011, 10:32 pm
laugh.gif U popular lo.. Legendary liao.. brows.gif
*
QUOTE(vccy @ Jul 26 2011, 10:33 PM)
Don worry bro. Eating siham quite often~~~~~. Ops  tongue.gif
you are the most famous PE user here ma. The most chosen and legend one  laugh.gif
*
Hey, Legend. What is the latest news about ur car compensation?
Or u kena Proton kaw tim and cover up oredi? whistling.gif
TSxandras
post Jul 26 2011, 10:38 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 26 2011, 10:37 PM)
Hey, Legend. What is the latest news about ur car compensation?
Or u kena Proton kaw tim and cover up oredi?  whistling.gif
*
Kena shut up by the corrupts with a huge amount of money d.. whistling.gif
vccy
post Jul 26 2011, 10:38 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(samwongjyhhorng @ Jul 26 2011, 11:30 PM)
around RM1200 for stage 2 tongue.gif plan do it on next year
*
you done stage 1? i tough you said stage 2 abit dangerous for PE?
ckdenion
post Jul 26 2011, 10:39 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(Fubar20 @ Jul 26 2011, 10:37 PM)
Hey, Legend. What is the latest news about ur car compensation?
Or u kena Proton kaw tim and cover up oredi?  whistling.gif
*
oh...proton will only cover the 1 month installment compensation...
but i reject it..
consumer tribunal already approve 2 phases of my report...
so 10th august will need to go consumer tribunal office...
if succeed in fighting for the compensation, then proton has to just agree to pay me more than just the 1 month installment...
Fubar20
post Jul 26 2011, 10:39 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 10:36 PM)
That's because the meter fluctuates according to ur fuel needle. If u dun believe, park ur car downhill & ur fuel needle will go up a little, then the distance meter will also increase..
*
Ya. Some time the needle will show down and light comes on. After few hours and then started again, the needle will point up and there is no light on.
TSxandras
post Jul 26 2011, 10:43 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 26 2011, 10:38 PM)
you done stage 1? i tough you said stage 2 abit dangerous for PE?
*
He loves doing risky stuffs mah.. brows.gif Mind of a businessman..

QUOTE(ckdenion @ Jul 26 2011, 10:39 PM)
oh...proton will only cover the 1 month installment compensation...
but i reject it..
consumer tribunal already approve 2 phases of my report...
so 10th august will need to go consumer tribunal office...
if succeed in fighting for the compensation, then proton has to just agree to pay me more than just the 1 month installment...
*
laugh.gif Fight for it man..

QUOTE(Fubar20 @ Jul 26 2011, 10:39 PM)
Ya. Some time the needle will show down and light comes on. After few hours and then started again, the needle will point up and there is no light on.
*
nod.gif
samwongjyhhorng
post Jul 26 2011, 10:45 PM

New Member
*
Junior Member
10 posts

Joined: Jun 2010


QUOTE(vccy @ Jul 26 2011, 10:38 PM)
you done stage 1? i tough you said stage 2 abit dangerous for PE?
*
i means if TC stage 2 will be high risk..PnP stage 2 is ok for normal use..stage 3 is for drag race ady..very makan minyak but powerful..
TSxandras
post Jul 26 2011, 10:46 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010





Anyone still remember this movie? laugh.gif
dadurtyz
post Jul 26 2011, 11:14 PM

On my way
****
Senior Member
658 posts

Joined: May 2006
From: Melaka



QUOTE(Cavino @ Jul 26 2011, 07:30 PM)
If you look at the specs for NanoCoat premium (3 months) or diamond (12 months). They are quite different from glass-based coating. Both emphasize different aspects with similar strength.

Yours are polymer based while sierra and magic is glass based. Yours deflect water for 12 months (diamond) while glass-based deflect for 2-5 years. Overall I would call this inferior to glass-based coating. Glass based coating emphasize on providing mirror like finish that lasted for 2-5 years. Yes, I can see myself especially for black colored vehicle. There is no mentioned of mirror finishing tho high luster gloss like newly polish got...but how long can sustained. At least for magic glare, I used 5 years liao...still shiny.

It mentioned also "keep strong performance by only dry polishing"....whats that..need to polish some more?
Glass-based sealent usually form a very hard (sierra) glass sealent that protects even against very minor scratch (it had to penetrate the sealent to reach the paint below)...although I kena scratch left and right also...but all can be dimmed or disappeared unless it cuts deeper. 

Better check with them all these points to ensure you know what you got by using their service. I think the strength is mostly keep water away...but so is the glass-based sealent, tho somehow it was not mention in their specs as their strength.
*
sound goods, but end of day, people will still preferred using own elbow hand to wax and polishing in conventional way.
for me, wax monthly and clay when needed, polish once a year and quick detail it everyday prevent from light dust is good enough.
but sometime super busy people will love to use their hands too but not chance, and glass sealant is good choice to less fine scratch and swirl mark.

alvizz
post Jul 26 2011, 11:16 PM

New Member
*
Junior Member
39 posts

Joined: Apr 2010


check in now~
new persona owner thus new AT driver~~
...>_<"
Bronze Garnet HL (AT) Elegance
Fubar20
post Jul 26 2011, 11:22 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(alvizz @ Jul 26 2011, 11:16 PM)
check in now~
new persona owner thus new AT driver~~
...>_<"
Bronze Garnet HL (AT) Elegance
*
Welcome! Where are u from?
dorinyeah
post Jul 26 2011, 11:23 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(alvizz @ Jul 26 2011, 11:16 PM)
check in now~
new persona owner thus new AT driver~~
...>_<"
Bronze Garnet HL (AT) Elegance
*
welcome to join here...another Bronzyy here! give me 5!
TSxandras
post Jul 26 2011, 11:30 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(alvizz @ Jul 26 2011, 11:16 PM)
check in now~
new persona owner thus new AT driver~~
...>_<"
Bronze Garnet HL (AT) Elegance
*
Hello.. Welcome to PPLYN.. Feel free to ask anything regarding ur new car here, we'll answer u swiftly.. brows.gif

QUOTE(dorinyeah @ Jul 26 2011, 11:23 PM)
welcome to join here...another Bronzyy here! give me 5!
*
blink.gif So many bronze on the road now la.. rclxub.gif
Fubar20
post Jul 26 2011, 11:31 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 11:30 PM)
Hello.. Welcome to PPLYN.. Feel free to ask anything regarding ur new car here, we'll answer u swiftly.. brows.gif
blink.gif So many bronze on the road now la.. rclxub.gif
*
What to do? Better than Chiffon Green. Less gay. whistling.gif
TSxandras
post Jul 26 2011, 11:33 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 26 2011, 11:31 PM)
What to do? Better than Chiffon Green. Less gay. whistling.gif
*
Pearl White nicer blink.gif
Fubar20
post Jul 26 2011, 11:34 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 26 2011, 11:33 PM)
Pearl White nicer blink.gif
*
Agreed. But taking care of it is not.
ckdenion
post Jul 26 2011, 11:35 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(xandras @ Jul 26 2011, 11:30 PM)
Hello.. Welcome to PPLYN.. Feel free to ask anything regarding ur new car here, we'll answer u swiftly.. brows.gif
blink.gif So many bronze on the road now la.. rclxub.gif
*
bronze garnet i like it bcz sometimes it looks grey...sometimes vry bronze...
depends on sunlight... rclxms.gif
TSxandras
post Jul 26 2011, 11:36 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 26 2011, 11:34 PM)
Agreed. But taking care of it is not.
*
I dont mind taking care of it leh.. brows.gif

QUOTE(ckdenion @ Jul 26 2011, 11:35 PM)
bronze garnet i like it bcz sometimes it looks grey...sometimes vry bronze...
depends on sunlight... rclxms.gif
*
If u do optiseal it'll look much nicer.. Trust me on this.. brows.gif
dorinyeah
post Jul 26 2011, 11:38 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(Fubar20 @ Jul 26 2011, 11:34 PM)
Agreed. But taking care of it is not.
*
yup...white very hard!!

QUOTE(xandras @ Jul 26 2011, 11:36 PM)
I dont mind taking care of it leh.. brows.gif
If u do optiseal it'll look much nicer.. Trust me on this.. brows.gif
*
optiseal $$$ rclxub.gif
zapdos9
post Jul 26 2011, 11:39 PM

chittychitty bangbang
****
Senior Member
523 posts

Joined: Aug 2005
From: Another Dimensioin


Wondered if sierra can help me remove the scratch mark as well
Fubar20
post Jul 26 2011, 11:39 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(dorinyeah @ Jul 26 2011, 11:38 PM)
yup...white very hard!!
optiseal $$$  rclxub.gif
*
We are not as rich as those who can afford 159. whistling.gif


Added on July 26, 2011, 11:40 pm
QUOTE(zapdos9 @ Jul 26 2011, 11:39 PM)
Wondered if sierra can help me remove the scratch mark as well
*
Eh, ur car marking still have ah?

This post has been edited by Fubar20: Jul 26 2011, 11:40 PM
TSxandras
post Jul 26 2011, 11:40 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dorinyeah @ Jul 26 2011, 11:38 PM)
yup...white very hard!!
optiseal $$$  rclxub.gif
*
laugh.gif Better than polishing n waxing dude..

QUOTE(zapdos9 @ Jul 26 2011, 11:39 PM)
Wondered if sierra can help me remove the scratch mark as well
*
Can wan lah..
dorinyeah
post Jul 26 2011, 11:40 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(Fubar20 @ Jul 26 2011, 11:39 PM)
We are not as rich as those who can afford 159.  whistling.gif
*
cry.gif ayam buruk
jackyap84
post Jul 26 2011, 11:41 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(samwongjyhhorng @ Jul 26 2011, 10:30 PM)
around RM1200 for stage 2 tongue.gif plan do it on next year
*
u done stage 1 already?
dorinyeah
post Jul 26 2011, 11:42 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


To all cheongstar!!

after cheong or makan siham dun drive during hungry ghost month!!
so better stay at GF house!!


TSxandras
post Jul 26 2011, 11:45 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dorinyeah @ Jul 26 2011, 11:42 PM)
To all cheongstar!!

after cheong or makan siham dun drive during hungry ghost month!!
so better stay at GF house!!


*
laugh.gif LOL!!! I damn kuat cheong wan wor.. Die la like that.. brows.gif

doh.gif u believe these kind of things wan ka? rclxub.gif
luenywoon
post Jul 26 2011, 11:48 PM

New Member
*
Junior Member
30 posts

Joined: Mar 2007


QUOTE(xandras @ Jul 26 2011, 11:40 PM)
laugh.gif Better than polishing n waxing dude..
Can wan lah..
*
How much does optiseal cost??
Can DIY??
zapdos9
post Jul 26 2011, 11:48 PM

chittychitty bangbang
****
Senior Member
523 posts

Joined: Aug 2005
From: Another Dimensioin


QUOTE(xandras @ Jul 26 2011, 11:45 PM)
laugh.gif LOL!!! I damn kuat cheong wan wor.. Die la like that.. brows.gif

doh.gif u believe these kind of things wan ka? rclxub.gif
*
If parent say stay ma stay lo. What to do.
dorinyeah
post Jul 26 2011, 11:51 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 26 2011, 11:45 PM)
laugh.gif LOL!!! I damn kuat cheong wan wor.. Die la like that.. brows.gif

doh.gif u believe these kind of things wan ka? rclxub.gif
*
i post here for fun only...some ppl believe some ppl dun...
but normally who scare ghost is never see ghost, who always see ghost but he dun scare them...LOL

QUOTE(zapdos9 @ Jul 26 2011, 11:48 PM)
If parent say stay ma stay lo. What to do.
*
good boy rclxms.gif
jasonloh7906
post Jul 26 2011, 11:56 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 26 2011, 10:24 PM)
PnP? depends on where u go to do lo.. Some real professional can charge u up to RM 1800-2000 for a PnP job.. If u want it quick, they'll just swap in a ported head for u.. If not, u have to leave ur car there for a few days for them to get it done.. by PnP it improves power & FC.. For our auto PE, PnP can increase up to 10 HP..
*
wats PnP again?? lol. nooby me.

QUOTE(xandras @ Jul 26 2011, 08:28 PM)
The rubber hose works, but only for a while. After a few months the noise will be back.. Still not sure why..
Hmm.. The sound should be louder when u accelerate if it's IAFM problem..
CCFL? Can gua.. custom make lo..
Clanking? Like how? We all know about the steering assembly noise, but I don't quite understand what u mean by steering column clanking..
*
custom made ah?? expensive leh. not cheap mod liao~~

QUOTE(dorinyeah @ Jul 26 2011, 11:42 PM)
To all cheongstar!!

after cheong or makan siham dun drive during hungry ghost month!!
so better stay at GF house!!


*
wat the...lucky i dont choose car as a location XD

QUOTE(dorinyeah @ Jul 26 2011, 08:38 AM)
Haha... HID will kena block so better dun go for HID.... LED rclxms.gif
so where u buy ur LED? can share?


Added on July 26, 2011, 8:41 amcoming thursday i go Cose 10am, who want join me?
*
here the difference of small light and headlight turn on. so it just appear to be that the light is whiter but on the road is not XD small light please refer to my avatar~~
user posted image
user posted image

This post has been edited by jasonloh7906: Jul 26 2011, 11:57 PM
ckdenion
post Jul 26 2011, 11:58 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(jasonloh7906 @ Jul 26 2011, 11:56 PM)
wats PnP again?? lol. nooby me.
*
port and polish...
can u take a picture of daylight from d front?
d strip is at the front lip rite?
TSxandras
post Jul 26 2011, 11:58 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(zapdos9 @ Jul 26 2011, 11:48 PM)
If parent say stay ma stay lo. What to do.
*
laugh.gif so mama's boy eh..

QUOTE(dorinyeah @ Jul 26 2011, 11:51 PM)
i post here for fun only...some ppl believe some ppl dun...
but normally who scare ghost is never see ghost, who always see ghost but he dun scare them...LOL
good boy rclxms.gif
*
laugh.gif Then are u afraid of them? brows.gif

QUOTE(jasonloh7906 @ Jul 26 2011, 11:56 PM)
wats PnP again?? lol. nooby me.
custom made ah?? expensive leh. not cheap mod liao~~
wat the...lucky i dont choose car as a location XD
here the difference of small light and headlight turn on. so it just appear to be that the light is whiter but on the road is not XD
user posted image
user posted image
*
P&P = Port & Polish. Done to the cylinder head to increase air flow efficiency.

Well that video serves as a gentle reminder to PE owners that love to cheong in the car.. (Our PE quite comfortable n spacious for regular cheonging session...brows.gif)
jasonloh7906
post Jul 26 2011, 11:58 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 26 2011, 11:45 PM)
laugh.gif LOL!!! I damn kuat cheong wan wor.. Die la like that.. brows.gif

doh.gif u believe these kind of things wan ka? rclxub.gif
*
wont ur gf say : hey, why u so damn kuat cheong 1 XD
TSxandras
post Jul 27 2011, 12:01 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 26 2011, 11:58 PM)
wont ur gf say : hey, why u so damn kuat cheong 1 XD
*
Well nobody will complain if both party loves the company of each other.. brows.gif
jasonloh7906
post Jul 27 2011, 12:02 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 26 2011, 11:58 PM)
laugh.gif so mama's boy eh..
laugh.gif Then are u afraid of them? brows.gif
P&P = Port & Polish. Done to the cylinder head to increase air flow efficiency.

Well that video serves as a gentle reminder to PE owners that love to cheong in the car.. (Our PE quite comfortable n spacious for regular cheonging session...brows.gif)
*
hmm...never tried. coz my car tint is stock. takut. hahahaha~~somemore, the seat is never better than the bed XD

QUOTE(ckdenion @ Jul 26 2011, 11:58 PM)
port and polish...
can u take a picture of daylight from d front?
d strip is at the front lip rite?
*
err...u mean from the front?? like how??
yup. is on the front lip. just ngam ngam fit. force it in a little plus a little double side tape to secure it. edi wont fall off. lol...tot of getting another one to put on the lower grill XD coz i like the L-shaped one(E/C-class style. forgot)
TSxandras
post Jul 27 2011, 12:04 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 12:02 AM)
hmm...never tried. coz my car tint is stock. takut. hahahaha~~somemore, the seat is never better than the bed XD
err...u mean from the front?? like how??
yup. is on the front lip. just ngam ngam fit. force it in a little plus a little double side tape to secure it. edi wont fall off. lol...tot of getting another one to put on the lower grill XD coz i like the L-shaped one(E/C-class style. forgot)
*
Try the jacuzzi tub.. brows.gif Had my fair share of experience with all styles n places in Penang..
ckdenion
post Jul 27 2011, 12:05 AM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(jasonloh7906 @ Jul 27 2011, 12:02 AM)
err...u mean from the front?? like how??
yup. is on the front lip. just ngam ngam fit. force it in a little plus a little double side tape to secure it. edi wont fall off. lol...tot of getting another one to put on the lower grill XD coz i like the L-shaped one(E/C-class style. forgot)
*
front picture...
d L-shape one...for me if i would like to install...i will ask them to cut d L-shape at the front skirting...just below d fog lamp...then install it...but tats just my idea of installing it...so u wanna try it out? brows.gif
jasonloh7906
post Jul 27 2011, 12:06 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 12:01 AM)
Well nobody will complain if both party loves the company of each other.. brows.gif
*
yup. true. hahahaha~~never received complain b4. but my friend say he kena complain. hahahaha~~

QUOTE(xandras @ Jul 26 2011, 11:58 PM)
laugh.gif so mama's boy eh..
laugh.gif Then are u afraid of them? brows.gif
P&P = Port & Polish. Done to the cylinder head to increase air flow efficiency.

Well that video serves as a gentle reminder to PE owners that love to cheong in the car.. (Our PE quite comfortable n spacious for regular cheonging session...brows.gif)
*
port and polish. how it function??
TSxandras
post Jul 27 2011, 12:07 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ckdenion @ Jul 27 2011, 12:05 AM)
front picture...
d L-shape one...for me if i would like to install...i will ask them to cut d L-shape at the front skirting...just below d fog lamp...then install it...but tats just my idea of installing it...so u wanna try it out? brows.gif
*
...no offence.. But I think the LED on the front of our PE looks a bit lala-ish.. Bcos it doesn't match our headlights.. Like E class got HID projector lamps to pair with the LED & it looks good in the same shade of white.. Same goes for Audi..
dorinyeah
post Jul 27 2011, 12:07 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 27 2011, 12:04 AM)
Try the jacuzzi tub.. brows.gif Had my fair share of experience with all styles n places in Penang..
*
fu...in tub shiok ah!!! when piston moving suddenly strong curent of hot water go in the valve...

QUOTE(ckdenion @ Jul 27 2011, 12:05 AM)
front picture...
d L-shape one...for me if i would like to install...i will ask them to cut d L-shape at the front skirting...just below d fog lamp...then install it...but tats just my idea of installing it...so u wanna try it out? brows.gif
*
i like the L-shape... need cut the skirting?
TSxandras
post Jul 27 2011, 12:09 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 12:06 AM)
yup. true. hahahaha~~never received complain b4. but my friend say he kena complain. hahahaha~~
port and polish. how it function??
*
laugh.gif Kena complain means something wrong somewhere with the relationship liao lo..whistling.gif

P&P need to korek cylinder head a bit to enlarge and adjust the air intake ports as well as smoothening it our for better air flow..
ckdenion
post Jul 27 2011, 12:10 AM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(xandras @ Jul 27 2011, 12:07 AM)
...no offence.. But I think the LED on the front of our PE looks a bit lala-ish.. Bcos it doesn't match our headlights.. Like E class got HID projector lamps to pair with the LED & it looks good in the same shade of white.. Same goes for Audi..
*
i agree wif u...for me...d ideal plan is just change d headlamp to either projector or the LED type like d audi...installing d daylight LED doesnt suit PE...

QUOTE(dorinyeah @ Jul 27 2011, 12:07 AM)
fu...in tub shiok ah!!! when piston moving suddenly strong curent of hot water go in the valve...
i like the L-shape... need cut the skirting?
*
depends where u want to install it...
TSxandras
post Jul 27 2011, 12:13 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dorinyeah @ Jul 27 2011, 12:07 AM)
fu...in tub shiok ah!!! when piston moving suddenly strong curent of hot water go in the valve...
i like the L-shape... need cut the skirting?
*
laugh.gif Life's good.. brows.gif
zapdos9
post Jul 27 2011, 12:17 AM

chittychitty bangbang
****
Senior Member
523 posts

Joined: Aug 2005
From: Another Dimensioin


QUOTE(xandras @ Jul 26 2011, 11:58 PM)
laugh.gif so mama's boy eh..
laugh.gif Then are u afraid of them? brows.gif
P&P = Port & Polish. Done to the cylinder head to increase air flow efficiency.

Well that video serves as a gentle reminder to PE owners that love to cheong in the car.. (Our PE quite comfortable n spacious for regular cheonging session...brows.gif)
*
Lol. No la. If go out sure nag wan ma since old ppl believe in these stuff so much
KKW
post Jul 27 2011, 12:18 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(jackyap84 @ Jul 26 2011, 05:44 PM)
got 5-30?
*
Yup. Got.
My vios using that grade smile.gif

QUOTE(jasonloh7906 @ Jul 26 2011, 08:22 PM)
led might not be bright enuf for headlamp.
i bought it here.
http://forum.lowyat.net/index.php?showtopic=1838899&hl=
but actually the led quality i think not very good brand one. the clip is not really nice. but i tape it with something. so far no loose lah. i also bought the daylight from him.
yaya~~agree. i might change my foglight to ccfl but dunno fit or not.
welcome welcome. hmm...16" should be nice XD
which area u in?? there is a roadshow for castrol in tebrau jusco if u are in JB.
cannot be lah~~ur car got problem is it?? how much u throttle??
*
I from cyberjaya.. I found one Castrol shop selling RM 188 free one chair.. smile.gif
Tomorrow I'm going to get it and service my car at serdang sc..
Anyone going there at 3pm? smile.gif

btw check this out
» Click to show Spoiler - click again to hide... «


This post has been edited by KKW: Jul 27 2011, 12:19 AM
TSxandras
post Jul 27 2011, 12:19 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(zapdos9 @ Jul 27 2011, 12:17 AM)
Lol. No la. If go out sure nag wan ma since old ppl believe in these stuff so much
*
laugh.gif Yea..parents are like that lah.. haiz..

QUOTE(KKW @ Jul 27 2011, 12:18 AM)
Yup. Got.
My vios using that grade  smile.gif
I from cyberjaya.. I found one Castrol shop selling RM 188 free one chair..  smile.gif
Tomorrow I'm going to get it and service my car at serdang sc..
Anyone going there at 3pm?  smile.gif
*
Free chair?? blink.gif If free gal i wan la.. brows.gif
KKW
post Jul 27 2011, 12:21 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 27 2011, 12:19 AM)
laugh.gif Yea..parents are like that lah.. haiz..
Free chair?? blink.gif If free gal i wan la.. brows.gif
*
If free gal.. castrol bankrup lo..
Fubar20
post Jul 27 2011, 12:21 AM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 27 2011, 12:19 AM)
laugh.gif Yea..parents are like that lah.. haiz..
Free chair?? blink.gif If free gal i wan la.. brows.gif
*
hmm.gif Who is the fella that said he got 1 siham enough oredi? whistling.gif
TSxandras
post Jul 27 2011, 12:21 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



@KKW

That just shows how spoiled the kid is. By how he drives the car in circles on a field, u'll know that his dad owns that R8 & probably just letting him get his joyride. Heck, even my PE havent gone on grass before.

Kids nowadays...


Added on July 27, 2011, 12:22 am
QUOTE(Fubar20 @ Jul 27 2011, 12:21 AM)
hmm.gif Who is the fella that said he got 1 siham enough oredi? whistling.gif
*
laugh.gif Ur mind too corrupted nia.. who said I'm gonna use the gal? Pimp her out to make money for me lah.. brows.gif

This post has been edited by xandras: Jul 27 2011, 12:22 AM
Fubar20
post Jul 27 2011, 12:25 AM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 27 2011, 12:21 AM)
@KKW

That just shows how spoiled the kid is. By how he drives the car in circles on a field, u'll know that his dad owns that R8 & probably just letting him get his joyride. Heck, even my PE havent gone on grass before.

Kids nowadays...


Added on July 27, 2011, 12:22 am
laugh.gif Ur mind too corrupted nia.. who said I'm gonna use the gal? Pimp her out to make money for me lah.. brows.gif
*
What a comeback. Now don't want to work at Kuman, change to become pimp ah? Later your son got no a**hole lo. whistling.gif

This post has been edited by Fubar20: Jul 27 2011, 12:28 AM
TSxandras
post Jul 27 2011, 12:27 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 27 2011, 12:25 AM)
What a comeback. Now don't want to work at Kuman to become pimp ah? Later your son got no a**hole lo. whistling.gif
*
laugh.gif Since when I'm working at Kumon to become a pimp?? rclxub.gif My intention to teach is genuine ok.. I don't look at kids the same way pedos like u look at them.. brows.gif
KKW
post Jul 27 2011, 12:29 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 27 2011, 12:21 AM)
@KKW

That just shows how spoiled the kid is. By how he drives the car in circles on a field, u'll know that his dad owns that R8 & probably just letting him get his joyride. Heck, even my PE havent gone on grass before.

Kids nowadays...


Added on July 27, 2011, 12:22 am
laugh.gif Ur mind too corrupted nia.. who said I'm gonna use the gal? Pimp her out to make money for me lah.. brows.gif
*
Damn.. That's true.. sweat.gif
If I got chance drive R8 I will test top speed first.. biggrin.gif
Fubar20
post Jul 27 2011, 12:29 AM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 27 2011, 12:27 AM)
laugh.gif Since when I'm working at Kumon to become a pimp?? rclxub.gif My intention to teach is genuine ok.. I don't look at kids the same way pedos like u look at them.. brows.gif
*
Sorrylah, bro. Sleepy already. Please continue the discussion and don't spam so much. laugh.gif
jasonloh7906
post Jul 27 2011, 12:33 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ckdenion @ Jul 27 2011, 12:05 AM)
front picture...
d L-shape one...for me if i would like to install...i will ask them to cut d L-shape at the front skirting...just below d fog lamp...then install it...but tats just my idea of installing it...so u wanna try it out? brows.gif
*
hmm...i dont trust their workmanship mah. later cut cut cut my bumper habis. hahahaha~~i edi got the daylight edi mah. so i wonder if i can add another 2 to the center XD

QUOTE(dorinyeah @ Jul 27 2011, 12:07 AM)
fu...in tub shiok ah!!! when piston moving suddenly strong curent of hot water go in the valve...
i like the L-shape... need cut the skirting?
*
same. but i dun wan cut my bumper. so i installed the normal one. maybe i buy another one and put in the the center XD four daylight. wow.

QUOTE(xandras @ Jul 27 2011, 12:07 AM)
...no offence.. But I think the LED on the front of our PE looks a bit lala-ish.. Bcos it doesn't match our headlights.. Like E class got HID projector lamps to pair with the LED & it looks good in the same shade of white.. Same goes for Audi..
*
hahahaha~~my car look ah beng meh??it doesnt match is bcoz of color lor. yah. but at nite when running it look like nothing but a normal stock car with a daylight tats all. hahahaha~~havent got money to buy projector headlamp mah.

QUOTE(xandras @ Jul 27 2011, 12:04 AM)
Try the jacuzzi tub.. brows.gif Had my fair share of experience with all styles n places in Penang..
*
wah...tat one damn high budget. hmm...can be tried in the future. maybe can do that when i go for a trip drool.gif hahahaha~~this club also provide advice on cheonging XD

QUOTE(xandras @ Jul 27 2011, 12:09 AM)
laugh.gif Kena complain means something wrong somewhere with the relationship liao lo..whistling.gif

P&P need to korek cylinder head a bit to enlarge and adjust the air intake ports as well as smoothening it our for better air flow..
*
lol...complain bcoz too tired XD
is not complain lah. just kidding only.
hmm...this thing seem like need a people with good skills. if not damage the engine.hahahaha~~

QUOTE(ckdenion @ Jul 27 2011, 12:10 AM)
i agree wif u...for me...d ideal plan is just change d headlamp to either projector or the LED type like d audi...installing d daylight LED doesnt suit PE...
depends where u want to install it...
*
aiyah. i also same got the plan mah. then it is like the headlamp so damn expensive.
i think u might like this. the headlamp with the led daylight. look at the gen2 one. is similiar to persona.
http://forum.lowyat.net/index.php?showtopic=1666907&hl=
i am interested. but out of budget currently.

QUOTE(ckdenion @ Jul 27 2011, 12:05 AM)
front picture...
d L-shape one...for me if i would like to install...i will ask them to cut d L-shape at the front skirting...just below d fog lamp...then install it...but tats just my idea of installing it...so u wanna try it out? brows.gif
*
hmm...do you mean front pic like this??
user posted image


ckdenion
post Jul 27 2011, 12:36 AM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(jasonloh7906 @ Jul 27 2011, 12:33 AM)
aiyah. i also same got the plan mah. then it is like the headlamp so damn expensive.
i think u might like this. the headlamp with the led daylight. look at the gen2 one. is similiar to persona.
http://forum.lowyat.net/index.php?showtopic=1666907&hl=
i am interested. but out of budget currently.
hmm...do you mean front pic like this??
user posted image
*
yea dis is d headlamp that i want
user posted image
front pic as in from d front u look at ur car...not from the top front...
as in u kneel down in front of ur car n look towards ur car...
TSxandras
post Jul 27 2011, 12:37 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 27 2011, 12:29 AM)
Damn.. That's true..  sweat.gif
If I got chance drive R8 I will test top speed first..  biggrin.gif
*
Top speed? I advise u not to.. sweat.gif I tested top speed too many times with different cars d, now I feel our PE's top speed damn slow.. Speed at 200 also no feel.. sweat.gif

QUOTE(Fubar20 @ Jul 27 2011, 12:29 AM)
Sorrylah, bro. Sleepy already. Please continue the discussion and don't spam so much. laugh.gif
*
brows.gif

QUOTE(jasonloh7906 @ Jul 27 2011, 12:33 AM)
hmm...i dont trust their workmanship mah. later cut cut cut my bumper habis. hahahaha~~i edi got the daylight edi mah. so i wonder if i can add another 2 to the center XD
same. but i dun wan cut my bumper. so i installed the normal one. maybe i buy another one and put in the the center XD four daylight. wow.
hahahaha~~my car look ah beng meh??it doesnt match is bcoz of color lor. yah. but at nite when running it look like nothing but a normal stock car with a daylight tats all. hahahaha~~havent got money to buy projector headlamp mah.
wah...tat one damn high budget. hmm...can be tried in the future. maybe can do that when i go for a trip  drool.gif hahahaha~~this club also provide advice on cheonging XD
lol...complain bcoz too tired XD
is not complain lah. just kidding only.
hmm...this thing seem like need a people with good skills. if not damage the engine.hahahaha~~
aiyah. i also same got the plan mah. then it is like the headlamp so damn expensive.
i think u might like this. the headlamp with the led daylight. look at the gen2 one. is similiar to persona.
http://forum.lowyat.net/index.php?showtopic=1666907&hl=
i am interested. but out of budget currently.
hmm...do you mean front pic like this??
user posted image
*
Yea.. We can advise u on anything.. From cars to life to work to cheonging.. brows.gif
jasonloh7906
post Jul 27 2011, 12:38 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ckdenion @ Jul 27 2011, 12:36 AM)
yea dis is d headlamp that i want
user posted image
front pic as in from d front u look at ur car...not from the top front...
as in u kneel down in front of ur car n look towards ur car...
*
lol...i also wan that headlamp. wait till i got budget then i change XD
this headlamp=hotbit.
oh. i understand wat u mean. hahahaaha~~coz that pic i got snap b4 mah. front view din snap. i will take the pic 2moro. wat bout ur car??


Added on July 27, 2011, 12:41 am
QUOTE(xandras @ Jul 27 2011, 12:37 AM)
Top speed? I advise u not to.. sweat.gif I tested top speed too many times with different cars d, now I feel our PE's top speed damn slow.. Speed at 200 also no feel.. sweat.gif
brows.gif
Yea.. We can advise u on anything.. From cars to life to work to cheonging.. brows.gif
*
lol...later too much on cheonging kena tutup thread~~i 20 only. so work no need to complain much. hahaha~~coz part time only. no need advice. basically cars lah. cheonging also need advice meh?? on wat oh. life it depends too..hahaha~~

This post has been edited by jasonloh7906: Jul 27 2011, 12:41 AM
TSxandras
post Jul 27 2011, 12:41 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 12:38 AM)
lol...i also wan that headlamp. wait till i got budget then i change XD
this headlamp=hotbit.
oh. i understand wat u mean. hahahaaha~~coz that pic i got snap b4 mah. front view din snap. i will take the pic 2moro. wat bout ur car??
*
rclxub.gif I think the bulbs are not that nice for the LED. It's not as bright as the OEM Audi LEDs, and are slightly bluish in colour. Saw it on Gen2 before, & IMHO better paired with blue HID projector if want it to match the LEDs, but it'll serve absolutely no purpose in rain.
KKW
post Jul 27 2011, 12:42 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 27 2011, 12:37 AM)
Top speed? I advise u not to.. sweat.gif I tested top speed too many times with different cars d, now I feel our PE's top speed damn slow.. Speed at 200 also no feel.. sweat.gif
brows.gif
Yea.. We can advise u on anything.. From cars to life to work to cheonging.. brows.gif
*
Hahahaha.. Yup. Our Persona top speed very slow.. sad.gif
jasonloh7906
post Jul 27 2011, 12:43 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


@denion
there is one thing about this daylight stripe on the headlamp. when u turn on the headlamp, the stripe normally cannot see edi. and is not as bright as other daylight.
TSxandras
post Jul 27 2011, 12:46 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 27 2011, 12:42 AM)
Hahahaha.. Yup. Our Persona top speed very slow..  sad.gif
*
Last time with my Myvi I hit 220 feel it's fast.. Probably because the car is light too.. But after playing around with the M3 at 280-300KM/h, 200-220 in PE is like nothing at all lah.. Bo rasa, no kick at all..
ZenGTMM
post Jul 27 2011, 12:46 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


DAMN U ALL SPAM SO MUCH..1 day i not online have to read 13pages..

QUOTE(Cavino @ Jul 26 2011, 09:49 AM)
Ya lor ya lor...I always *** those ppl with HID without projector lights...damn glaring, almost knock into them. If only I drove a big lorry, I WILL purposely knock into them, then blame them for illegally installing HID..

Installing HID without projector is very uncool. Every time I see ppl with this setup, instead of thinking how cool is those white light, my thought is, "so cheap skate kah...got money install HID, no money to mod a projector light....if want to fcuk, don't fcuk halfway...no song wan, better not do it at all"
*
U can start by banging KKW's car.. His HID foglamp so so so damn bluish bright.. It hurts just to look at his car.. looks like its 6500K brightness..

QUOTE(dorinyeah @ Jul 26 2011, 11:22 AM)
after PnP ckt have to change thicker&bigger piston lor, else loss grip on cylinder wall. hmm.gif
*
And not to forget use thicker lubricants too to provide maximum lubrication..

QUOTE(dorinyeah @ Jul 26 2011, 11:29 AM)
PnP not dig the cylinder wall and change larger piston meh? then wat it should call ah??
my fren told me PnP is make engine displacement bigger like 1.6 dig to 1.8 like tat...
*
1.6 to 1.8 is called stroking the engine..

QUOTE(dzie25 @ Jul 26 2011, 11:44 AM)
HI HI All,  I'm New To Persona.. just bought my Car Last Month ago ! At first Greatz to Thread 21yos !

I have a question, i'm having a B-Line, i thinking to change RIM+ Tayer.. so... original is 15inch .. how was the feed back on 16inch.. or no difference at all.......

Thanks ! rclxms.gif
*
got a lot of difference.. The main thing is to fit in good tires which gives good grip.. Better got for 17".. It feels very grippy and fits the tire well very well..

QUOTE(Fubar20 @ Jul 26 2011, 01:36 PM)
How much u install and where you did it?

Maybe he check during different day lo. Here at Shah Alam also 99.90 last week.
*
Nope same day.. Went to buy it last sat.. Saw it so cheap so straight bought it without thinking twice..

QUOTE(miriel10 @ Jul 26 2011, 03:17 PM)
First off, congrats on v21!

Secondly, do you think installing fuel regulators will further improve the car's performance? Or do the exhaust piping first?

My Persona is the 1st gen Persona. Model 2007, B-Line, MT

What I have done so far:
1. HotBits 4-2-1 extractor & midbox with dunno what brand s-flow muffler
2. K&N Open Pod Air Filter injection kit (changed this from Works Engineering drop in)
3. Ultra Racing Front Strut Bar (3 Point) & Anti Roll Bar
4. Aerospeed LCP & Spark Plug Cable
5. Denso Iridium Spark Plugs
*
But have ady done ur exhaust piping right? Why need to redo again? Is ur exhaust only 1 midbox? Change it to 1x 12" swirl bullet and 1x 9" straight bullet.. A lot of extra power can be gained.

QUOTE(dadurtyz @ Jul 26 2011, 03:31 PM)
mang at bottle it self already write design for BMW and mercedez, the oil design for perfomance car, use magnatec also enough no need waste money
*
Did u all noticed that the Shell Helix Ultra does not pass the BMW LL-04 test? That means there is something wrong with the stability of the oil if its kept in the engine for an extended period of time.

QUOTE(Fubar20 @ Jul 26 2011, 03:44 PM)
Ya, bro. You are right but is the difference very significant? Here are the three oils datasheet.
Please compare the viscosity at 40 degree C for 0W-40, 5W-40 and a more thinner grade 5W-30.
Attached File  castrol_edge_5w_40.pdf ( 118.8k ) Number of downloads: 10
Attached File  EDGESport0W_40.pdf ( 25.27k ) Number of downloads: 9
Attached File  castrol_magnatec_5w_30_engine_oil_ford_a1.pdf ( 56.75k ) Number of downloads: 4



Added on July 26, 2011, 3:47 pm
Haha.. Fully where got waste money want. If waste money, sure market don't want this product.
*
Its around the same.. Save for that the Edge sport is slightly thinner than the normal edge.. So when i use edge sport.. Sure i can gain some extra horsies under the hood.. haha..

QUOTE(ngeo88 @ Jul 26 2011, 03:50 PM)
to be frank i never try the 0W oil yet  doh.gif  since Zeng and Xan here also not recomented and our Campro are enough rawh.....when using 5W-40 so not thingking to use it. biggrin.gif
*
Im gonna try that for my next service.. Xan have used the Edge biasa only.. Now lets see if edge sport can give me more tapau-ing power!!

QUOTE(jackyap84 @ Jul 26 2011, 06:51 PM)
me alone almost 100kg lor...  brows.gif
*
Got meh?? U are so thin wei... unless ur bones made from cast iron lah.. LOLz..

QUOTE(wan arif @ Jul 26 2011, 07:39 PM)
my engine..the power stereeng pipe that thought cause the kncking sound..

this is my engine bay car..

Attached Image
and this is the picture i get at our v10..

Attached Image
what do u think..different pipe that had been put rubber hose originaly by proton..do u think the reason of the noise still the pipe..cause the noise come from front left..not front right..the pipe in the rite of engine..

thank u..just two month n my first car actually..i rely worried n hate when the noise came out..

sory for my englishhhh  blush.gif
*
Dont really know the cause.. Just give a complaint to the SC when u do ur service.. Let them tightened the undercarriage and see if the noise is still there.

QUOTE(Dav6534 @ Jul 26 2011, 08:32 PM)
lol. that sounds bad..very bad in fact. haha
*
u dont know how much damage 3 days of high speed revving can do to ur siham engine! XD..
And as we all know his siham is Shell punya quality.. Cant last that long also.. biggrin.gif

QUOTE(jackyap84 @ Jul 26 2011, 09:02 PM)
the knocking sound come back again after 3-4 months after changed the power steering assembly... i also dont know what cause it... wondering too...
*
Mine still no knocking sound.. hehe..

QUOTE(xandras @ Jul 26 2011, 10:24 PM)
PnP? depends on where u go to do lo.. Some real professional can charge u up to RM 1800-2000 for a PnP job.. If u want it quick, they'll just swap in a ported head for u.. If not, u have to leave ur car there for a few days for them to get it done.. by PnP it improves power & FC.. For our auto PE, PnP can increase up to 10 HP..
*
Got so much or not? 10hp no play play leh..

QUOTE(ckdenion @ Jul 26 2011, 10:29 PM)
i heard my name...AGAIN... biggrin.gif
*
I are Legen wait-for-it dary!!

QUOTE(dorinyeah @ Jul 26 2011, 11:42 PM)
To all cheongstar!!

after cheong or makan siham dun drive during hungry ghost month!!
so better stay at GF house!!


*
Damn.. My car tinted dark dark.. The ghost can see through or not?

KKW
post Jul 27 2011, 12:50 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 27 2011, 12:46 AM)
Last time with my Myvi I hit 220 feel it's fast.. Probably because the car is light too.. But after playing around with the M3 at 280-300KM/h, 200-220 in PE is like nothing at all lah.. Bo rasa, no kick at all..
*
I drove my friend Mazda 6..
Hit 180km like really fast.. on persona rclxub.gif

QUOTE(ZenGTMM @ Jul 27 2011, 12:46 AM)
DAMN U ALL SPAM SO MUCH..1 day i not online have to read 13pages..
U can start by banging KKW's car.. His HID foglamp so so so damn bluish bright.. It hurts just to look at his car.. looks like its 6500K brightness..
And not to forget use thicker lubricants too to provide maximum lubrication..
1.6 to 1.8 is called stroking the engine..
got a lot of difference.. The main thing is to fit in good tires which gives good grip.. Better got for 17".. It feels very grippy and fits the tire well very well..
Nope same day.. Went to buy it last sat.. Saw it so cheap so straight bought it without thinking twice..
But have ady done ur exhaust piping right? Why need to redo again? Is ur exhaust only 1 midbox? Change it to 1x 12" swirl bullet and 1x 9" straight bullet.. A lot of extra power can be gained.
Did u all noticed that the Shell Helix Ultra does not pass the BMW LL-04 test? That means there is something wrong with the stability of the oil if its kept in the engine for an extended period of time.
Its around the same.. Save for that the Edge sport is slightly thinner than the normal edge.. So when i use edge sport.. Sure i can gain some extra horsies under the hood.. haha..
Im gonna  try that for my next service.. Xan have used the Edge biasa only.. Now lets see if edge sport can give me more tapau-ing power!!
Got meh?? U are so thin wei... unless ur bones made from cast iron lah.. LOLz..
Dont really know the cause.. Just give a complaint to the SC when u do ur service.. Let them tightened the undercarriage and see if the noise is still there.
u dont know how much damage 3 days of high speed revving can do to ur siham engine! XD..
And as we all know his siham is Shell punya quality.. Cant last that long also.. biggrin.gif
Mine still no knocking sound.. hehe..
Got so much or not? 10hp no play play leh..
I are Legen wait-for-it dary!!
Damn.. My car tinted dark dark.. The ghost can see through or not?
*
Zeng, my HID sudah cabut already and sold to instant mee supplier already biggrin.gif
TSxandras
post Jul 27 2011, 12:51 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 12:46 AM)
DAMN U ALL SPAM SO MUCH..1 day i not online have to read 13pages..
U can start by banging KKW's car.. His HID foglamp so so so damn bluish bright.. It hurts just to look at his car.. looks like its 6500K brightness..
And not to forget use thicker lubricants too to provide maximum lubrication..
1.6 to 1.8 is called stroking the engine..
got a lot of difference.. The main thing is to fit in good tires which gives good grip.. Better got for 17".. It feels very grippy and fits the tire well very well..
Nope same day.. Went to buy it last sat.. Saw it so cheap so straight bought it without thinking twice..
But have ady done ur exhaust piping right? Why need to redo again? Is ur exhaust only 1 midbox? Change it to 1x 12" swirl bullet and 1x 9" straight bullet.. A lot of extra power can be gained.
Did u all noticed that the Shell Helix Ultra does not pass the BMW LL-04 test? That means there is something wrong with the stability of the oil if its kept in the engine for an extended period of time.
Its around the same.. Save for that the Edge sport is slightly thinner than the normal edge.. So when i use edge sport.. Sure i can gain some extra horsies under the hood.. haha..
Im gonna  try that for my next service.. Xan have used the Edge biasa only.. Now lets see if edge sport can give me more tapau-ing power!!
Got meh?? U are so thin wei... unless ur bones made from cast iron lah.. LOLz..
Dont really know the cause.. Just give a complaint to the SC when u do ur service.. Let them tightened the undercarriage and see if the noise is still there.
u dont know how much damage 3 days of high speed revving can do to ur siham engine! XD..
And as we all know his siham is Shell punya quality.. Cant last that long also.. biggrin.gif
Mine still no knocking sound.. hehe..
Got so much or not? 10hp no play play leh..
I are Legen wait-for-it dary!!
Damn.. My car tinted dark dark.. The ghost can see through or not?
*
sweat.gif KKW removed his HID d lah.. Sold to Sam d..

True.. she really Shell punya quality.. But that's probably because she's still 'new' to it.. brows.gif

Yeah, 10 hp gain with P&P.. on wheel..

Ur car tint so dark the ghost wanna see through also have to use torchlight la.. brows.gif
KKW
post Jul 27 2011, 12:53 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(Cavino @ Jul 26 2011, 09:49 AM)
Ya lor ya lor...I always *** those ppl with HID without projector lights...damn glaring, almost knock into them. If only I drove a big lorry, I WILL purposely knock into them, then blame them for illegally installing HID..

Installing HID without projector is very uncool. Every time I see ppl with this setup, instead of thinking how cool is those white light, my thought is, "so cheap skate kah...got money install HID, no money to mod a projector light....if want to fcuk, don't fcuk halfway...no song wan, better not do it at all"
*
It depends on the HID kits as well..
Some HID are proper anti glare like Philips HID smile.gif


Added on July 27, 2011, 12:54 am
QUOTE(xandras @ Jul 27 2011, 12:51 AM)
sweat.gif KKW removed his HID d lah.. Sold to Sam d..

True.. she really Shell punya quality.. But that's probably because she's still 'new' to it.. brows.gif

Yeah, 10 hp gain with P&P.. on wheel..

Ur car tint so dark the ghost wanna see through also have to use torchlight la.. brows.gif
*
Hahah you remember biggrin.gif

This post has been edited by KKW: Jul 27 2011, 12:54 AM
TSxandras
post Jul 27 2011, 12:54 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 27 2011, 12:50 AM)
I drove my friend Mazda 6..
Hit 180km like really fast.. on persona  rclxub.gif
Zeng, my HID sudah cabut already and sold to instant mee supplier already  biggrin.gif
*
Still.. On executive cars, I think the Honda Accord 3.5's acceleration is phenomenal.. Top speed had to be limited to 250..
KKW
post Jul 27 2011, 12:57 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 27 2011, 12:54 AM)
Still.. On executive cars, I think the Honda Accord 3.5's acceleration is phenomenal.. Top speed had to be limited to 250..
*
That one no need said jor..
My self like truck biggrin.gif
TSxandras
post Jul 27 2011, 12:59 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 27 2011, 12:57 AM)
That one no need said jor..
My self like truck  biggrin.gif
*
laugh.gif I'm the type that cant live without speed lah.. But I speed so much lately till I realised no matter how fast I speed also I'm going nowhere, I'm still gonna reach the destination & wont be able to cut much time off it.. So better just drive decently.. Save petrol samore.. laugh.gif Shell 1/2 tank also can last me 320 KMs now.. rclxub.gif
jasonloh7906
post Jul 27 2011, 01:01 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 12:41 AM)
rclxub.gif I think the bulbs are not that nice for the LED. It's not as bright as the OEM Audi LEDs, and are slightly bluish in colour. Saw it on Gen2 before, & IMHO better paired with blue HID projector if want it to match the LEDs, but it'll serve absolutely no purpose in rain.
*
yup. not as bright as Audi. cannot compare mah. is audi versus XX brand lah. i saw it also b4. at nite actually cannot see the stripe. but wat i mean is either i change to projector or angel eye or something different. hahahaha~~blue color?? omg. for wat. i prefer low profile XD

QUOTE(KKW @ Jul 27 2011, 12:42 AM)
Hahahaha.. Yup. Our Persona top speed very slow..  sad.gif
*
200 also slow. haiz....malaysia lah dei. hahahaha~~

QUOTE(xandras @ Jul 27 2011, 12:46 AM)
Last time with my Myvi I hit 220 feel it's fast.. Probably because the car is light too.. But after playing around with the M3 at 280-300KM/h, 200-220 in PE is like nothing at all lah.. Bo rasa, no kick at all..
*
wat to do. tried a better one, u will never say other is good edi. like me even my dad old volvo versus persona also blink.gif .yours is M3 versus persona. where can.

QUOTE(KKW @ Jul 27 2011, 12:50 AM)
I drove my friend Mazda 6..
Hit 180km like really fast.. on persona  rclxub.gif
Zeng, my HID sudah cabut already and sold to instant mee supplier already  biggrin.gif
*
and this is mazda 6 versus persona.

QUOTE(KKW @ Jul 27 2011, 12:53 AM)
It depends on the HID kits as well..
Some HID are proper anti glare like Philips HID  smile.gif


Added on July 27, 2011, 12:54 am

Hahah you remember  biggrin.gif
*
philips HID ORI is not cheap. hahahaha~~of coz lah~~

QUOTE(xandras @ Jul 27 2011, 12:54 AM)
Still.. On executive cars, I think the Honda Accord 3.5's acceleration is phenomenal.. Top speed had to be limited to 250..
*
y had to be limited??

QUOTE(xandras @ Jul 27 2011, 12:59 AM)
laugh.gif I'm the type that cant live without speed lah.. But I speed so much lately till I realised no matter how fast I speed also I'm going nowhere, I'm still gonna reach the destination & wont be able to cut much time off it.. So better just drive decently.. Save petrol samore.. laugh.gif Shell 1/2 tank also can last me 320 KMs now.. rclxub.gif
*
yup. and u know. hahahaha~~bcoz u are in KL. hmm...seems like ur shell is saving 10liter per full tank instead of 1 liter.hahahaha~~
ZenGTMM
post Jul 27 2011, 01:03 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 12:59 AM)
laugh.gif I'm the type that cant live without speed lah.. But I speed so much lately till I realised no matter how fast I speed also I'm going nowhere, I'm still gonna reach the destination & wont be able to cut much time off it.. So better just drive decently.. Save petrol samore.. laugh.gif Shell 1/2 tank also can last me 320 KMs now.. rclxub.gif
*
True.. My last tank.. Whole tank of heavy fnf only can get 380km of mileage.. Damn sakit hati.. Lost 70km of mileage just like that.. doh.gif
Somemore going to change engine oil this coming thurs.. hehe.. No money do full service.. so just do minor lube service only. cry.gif
KKW
post Jul 27 2011, 01:05 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 27 2011, 12:59 AM)
laugh.gif I'm the type that cant live without speed lah.. But I speed so much lately till I realised no matter how fast I speed also I'm going nowhere, I'm still gonna reach the destination & wont be able to cut much time off it.. So better just drive decently.. Save petrol samore.. laugh.gif Shell 1/2 tank also can last me 320 KMs now.. rclxub.gif
*
Lol.. my record when I work at bukit jalil..
From cyberjaya to bukit jalil only 8minutes tongue.gif

QUOTE(jasonloh7906 @ Jul 27 2011, 01:01 AM)
yup. not as bright as Audi. cannot compare mah. is audi versus XX brand lah. i saw it also b4. at nite actually cannot see the stripe. but wat i mean is either i change to projector or angel eye or something different. hahahaha~~blue color?? omg. for wat. i prefer low profile XD
200 also slow. haiz....malaysia lah dei. hahahaha~~
wat to do. tried a better one, u will never say other is good edi. like me even my dad old volvo versus persona also  blink.gif .yours is M3 versus persona. where can.
and this is mazda 6 versus persona.
philips HID ORI is not cheap. hahahaha~~of coz lah~~
y had to be limited??
yup. and u know. hahahaha~~bcoz u are in KL. hmm...seems like ur shell is saving 10liter per full tank instead of 1 liter.hahahaha~~
*
Yup. Some taiwan HID also got proper anti glare.. smile.gif
TSxandras
post Jul 27 2011, 01:05 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 01:01 AM)
yup. not as bright as Audi. cannot compare mah. is audi versus XX brand lah. i saw it also b4. at nite actually cannot see the stripe. but wat i mean is either i change to projector or angel eye or something different. hahahaha~~blue color?? omg. for wat. i prefer low profile XD
200 also slow. haiz....malaysia lah dei. hahahaha~~
wat to do. tried a better one, u will never say other is good edi. like me even my dad old volvo versus persona also  blink.gif .yours is M3 versus persona. where can.
and this is mazda 6 versus persona.
philips HID ORI is not cheap. hahahaha~~of coz lah~~
y had to be limited??
yup. and u know. hahahaha~~bcoz u are in KL. hmm...seems like ur shell is saving 10liter per full tank instead of 1 liter.hahahaha~~
*
Wan low profile better leave everything stock standard.. laugh.gif

200 really slow la.. Once u got used to the speed u'll get bored of it.. sweat.gif

I really dunno why the Shell saving so much now. Probably it's because of my driving style lah. Drive like grandmother now. But engine noise still quite loud. Power range still sucks.

Dono y they limited it.. Go ask Honda laugh.gif I think even if they remove the limiter also max can hit 260 nia..
KKW
post Jul 27 2011, 01:06 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(ZenGTMM @ Jul 27 2011, 01:03 AM)
True.. My last tank.. Whole tank of heavy fnf only can get 380km of mileage.. Damn sakit hati.. Lost 70km of mileage just like that..  doh.gif
Somemore going to change engine oil this coming thurs.. hehe.. No money do full service.. so just do minor lube service only. cry.gif
*
Serdang sc?
Tomorrow I'm going there.. want to join me? smile.gif
ZenGTMM
post Jul 27 2011, 01:08 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(KKW @ Jul 27 2011, 01:06 AM)
Serdang sc?
Tomorrow I'm going there.. want to join me?  smile.gif
*
Nope.. Me going COSE on thurs with dorinyeah.. 10am appointment. Had to go there instead of Serdang cos sedang dont allow me to use own lube.. And i have previously claimed a belt tensioner from COSE have to go there and install.. Serdang cant claim another unit for me.. Jibai..
TSxandras
post Jul 27 2011, 01:14 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



Dei macha, wan TT? rclxub.gif
jasonloh7906
post Jul 27 2011, 01:15 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 01:05 AM)
Wan low profile better leave everything stock standard.. laugh.gif

200 really slow la.. Once u got used to the speed u'll get bored of it.. sweat.gif

I really dunno why the Shell saving so much now. Probably it's because of my driving style lah. Drive like grandmother now. But engine noise still quite loud. Power range still sucks.

Dono y they limited it.. Go ask Honda laugh.gif I think even if they remove the limiter also max can hit 260 nia..
*
hahaha~~of coz lah~~i wanna to leave it stock one. and only change my headlamp to better and brighter halogen like osram. but then gatal gatal buy this gatal gatal buy that. then wat to do. just pasang lor. hahahahaha~~
hmm....shell fc i get near esso. but its even noisier than esso, rougher, less power. @@ like opposite of V-power. hahahaha~~

QUOTE(KKW @ Jul 27 2011, 01:05 AM)
Lol.. my record when I work at bukit jalil..
From cyberjaya to bukit jalil only 8minutes  tongue.gif
Yup. Some taiwan HID also got proper anti glare.. smile.gif
*
yah...got anti-glare. but i dun think i will get HID lah~~


Added on July 27, 2011, 1:21 am
QUOTE(ZenGTMM @ Jul 27 2011, 01:08 AM)
Nope.. Me going COSE on thurs with dorinyeah.. 10am appointment. Had to go there instead of Serdang cos sedang dont allow me to use own lube.. And i have previously claimed a belt tensioner from COSE have to go there and install.. Serdang cant claim another unit for me.. Jibai..
*
wats a belt tensioner for??

This post has been edited by jasonloh7906: Jul 27 2011, 01:21 AM
ZenGTMM
post Jul 27 2011, 01:25 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 01:14 AM)
Dei macha, wan TT? rclxub.gif
*
This weekend not free.. have to go work.. I will be in PC fair.. hehe..

QUOTE(jasonloh7906 @ Jul 27 2011, 01:15 AM)
hahaha~~of coz lah~~i wanna to leave it stock one. and only change my headlamp to better and brighter halogen like osram. but then gatal gatal buy this gatal gatal buy that. then wat to do. just pasang lor. hahahahaha~~
hmm....shell fc i get near esso. but its even noisier than esso, rougher, less power. @@ like opposite of V-power. hahahaha~~
yah...got anti-glare. but i dun think i will get HID lah~~


Added on July 27, 2011, 1:21 am
wats a belt tensioner for??
*
its for giving tension to the belt.. so ur belt dont slip while running and cause the screeching noise..
TSxandras
post Jul 27 2011, 01:26 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 01:25 AM)
This weekend not free.. have to go work.. I will be in PC fair.. hehe..
its for giving tension to the belt.. so ur belt dont slip while running and cause the screeching noise..
*
Eh? Got PC fair meh? rclxub.gif
jasonloh7906
post Jul 27 2011, 01:27 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ZenGTMM @ Jul 27 2011, 01:25 AM)
This weekend not free.. have to go work.. I will be in PC fair.. hehe..
its for giving tension to the belt.. so ur belt dont slip while running and cause the screeching noise..
*
i asked bcoz my car kind of like producing that kind of belt sound.
ZenGTMM
post Jul 27 2011, 01:31 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 01:26 AM)
Eh? Got PC fair meh? rclxub.gif
*
Not really PC fair lah.. its Pikom Digital Lifestyle expo.

QUOTE(jasonloh7906 @ Jul 27 2011, 01:27 AM)
i asked bcoz my car kind of like producing that kind of belt sound.
*
Oic.. Hmmm then bring to SC to check.. see if they say its the tensioner prob or just need to lube the belting..
TSxandras
post Jul 27 2011, 01:34 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 01:31 AM)
Not really PC fair lah.. its Pikom Digital Lifestyle expo.
Oic.. Hmmm then bring to SC to check.. see if they say its the tensioner prob or just need to lube the belting..
*
Owh.. Got sell thumbdrive ka? laugh.gif I never kept myself up to date with all these digital stuffs for a very long time d..
ZenGTMM
post Jul 27 2011, 01:39 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 01:34 AM)
Owh.. Got sell thumbdrive ka? laugh.gif I never kept myself up to date with all these digital stuffs for a very long time d..
*
Sure got.. hehe.. U mau ah? But i cant walk around and go scout for one i think..
TSxandras
post Jul 27 2011, 01:42 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 01:39 AM)
Sure got.. hehe.. U mau ah? But i cant walk around and go scout for one i think..
*
If can u get for me at cheaper price then i wan la.. laugh.gif
ZenGTMM
post Jul 27 2011, 01:46 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 01:42 AM)
If can u get for me at cheaper price then i wan la.. laugh.gif
*
Im at the panasonic booth lah.. Wont have thumbdrive there..

TSxandras
post Jul 27 2011, 01:48 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 01:46 AM)
Im at the panasonic booth lah.. Wont have thumbdrive there..
*
Aisey.. got gals? brows.gif
ZenGTMM
post Jul 27 2011, 01:49 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 01:48 AM)
Aisey.. got gals? brows.gif
*
That one confirm sure have.. If dont have surely I wont go and work there.. XD
Hope can meet cheeky girls like these.

TSxandras
post Jul 27 2011, 01:52 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 01:49 AM)
That one confirm sure have.. If dont have surely I wont go and work there.. XD
Hope can meet cheeky girls like these.

*
The first thing I noticed was..

..doinggg...doinggg...doingggkk... brows.gif
ZenGTMM
post Jul 27 2011, 01:55 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 01:52 AM)
The first thing I noticed was..

..doinggg...doinggg...doingggkk... brows.gif
*
Hehehe.. If cant get chinese then i go western.. XD.. tongue.gif

MovingMachine
post Jul 27 2011, 02:06 AM

New Member
*
Junior Member
30 posts

Joined: Sep 2010
Noob question, if you drive fast with the windows down, do it sucks all the dust out? tongue.gif
ZenGTMM
post Jul 27 2011, 02:10 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(MovingMachine @ Jul 27 2011, 02:06 AM)
Noob question, if you drive fast with the windows down, do it sucks all the dust out? tongue.gif
*
Omg this is so joke sections worthy.. hahah...
Nope it wont.. It will add more dust in cos the dust from outside ur car can enter through the opened window.
TSxandras
post Jul 27 2011, 02:23 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010





Dude.. My ideal gal.. brows.gif
ZenGTMM
post Jul 27 2011, 02:29 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006



Ok start laughing now.. haha.
TSxandras
post Jul 27 2011, 02:34 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 02:29 AM)

Ok start laughing now.. haha.
*
LoL.. Saw this before.. Hahahah..
ZenGTMM
post Jul 27 2011, 02:39 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 02:34 AM)
LoL.. Saw this before.. Hahahah..
*
Eh bai come online.. Msn..
TSxandras
post Jul 27 2011, 03:00 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 02:39 AM)
Eh bai come online.. Msn..
*
Online msg u no reply =.=
adriankhoo153
post Jul 27 2011, 07:55 AM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
My leg aircond sometime got a/c sometime dont have.. My 5k service coming.. Gonna go and complaint to SC.

Also always when tekan the pedal got this erm...belt sound yii yii yii

This post has been edited by adriankhoo153: Jul 27 2011, 08:06 AM
TSxandras
post Jul 27 2011, 09:04 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(adriankhoo153 @ Jul 27 2011, 07:55 AM)
My leg aircond sometime got a/c sometime dont have.. My 5k service coming.. Gonna go and complaint to SC.

Also always when tekan the pedal got this erm...belt sound yii yii yii
*
The pedal noise is probably the noise fromthe hinge. u go CoSE they'll just spray WD 40 for u..laugh.gif
KKW
post Jul 27 2011, 09:17 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(ZenGTMM @ Jul 27 2011, 01:08 AM)
Nope.. Me going COSE on thurs with dorinyeah.. 10am appointment. Had to go there instead of Serdang cos sedang dont allow me to use own lube.. And i have previously claimed a belt tensioner from COSE have to go there and install.. Serdang cant claim another unit for me.. Jibai..
*
They allow use own lube la..
They change for me before

QUOTE(jasonloh7906 @ Jul 27 2011, 01:15 AM)
hahaha~~of coz lah~~i wanna to leave it stock one. and only change my headlamp to better and brighter halogen like osram. but then gatal gatal buy this gatal gatal buy that. then wat to do. just pasang lor. hahahahaha~~
hmm....shell fc i get near esso. but its even noisier than esso, rougher, less power. @@ like opposite of V-power. hahahaha~~
yah...got anti-glare. but i dun think i will get HID lah~~


Added on July 27, 2011, 1:21 am
wats a belt tensioner for??
*
Mine got sound.. i managed claim one biggrin.gif
jackyap84
post Jul 27 2011, 09:47 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(dorinyeah @ Jul 26 2011, 11:42 PM)
To all cheongstar!!

after cheong or makan siham dun drive during hungry ghost month!!
so better stay at GF house!!


*
sure or not?


Added on July 27, 2011, 9:51 am
QUOTE(jasonloh7906 @ Jul 27 2011, 12:33 AM)
hmm...i dont trust their workmanship mah. later cut cut cut my bumper habis. hahahaha~~i edi got the daylight edi mah. so i wonder if i can add another 2 to the center XD
same. but i dun wan cut my bumper. so i installed the normal one. maybe i buy another one and put in the the center XD four daylight. wow.
hahahaha~~my car look ah beng meh??it doesnt match is bcoz of color lor. yah. but at nite when running it look like nothing but a normal stock car with a daylight tats all. hahahaha~~havent got money to buy projector headlamp mah.
wah...tat one damn high budget. hmm...can be tried in the future. maybe can do that when i go for a trip  drool.gif hahahaha~~this club also provide advice on cheonging XD
lol...complain bcoz too tired XD
is not complain lah. just kidding only.
hmm...this thing seem like need a people with good skills. if not damage the engine.hahahaha~~
aiyah. i also same got the plan mah. then it is like the headlamp so damn expensive.
i think u might like this. the headlamp with the led daylight. look at the gen2 one. is similiar to persona.
http://forum.lowyat.net/index.php?showtopic=1666907&hl=
i am interested. but out of budget currently.
hmm...do you mean front pic like this??
user posted image
*
is this the best location for the day light led place? any better area fit tis in?

This post has been edited by jackyap84: Jul 27 2011, 09:51 AM
TSxandras
post Jul 27 2011, 09:52 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 27 2011, 09:17 AM)
They allow use own lube la..
They change for me before
Mine got sound.. i managed claim one  biggrin.gif
*
laugh.gif

QUOTE(jackyap84 @ Jul 27 2011, 09:47 AM)
sure or not?
*
U also believe? laugh.gif
jackyap84
post Jul 27 2011, 09:53 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(xandras @ Jul 27 2011, 09:52 AM)
laugh.gif
U also believe? laugh.gif
*
erm... doubt of it... but still will get a bit worry lar...
TSxandras
post Jul 27 2011, 09:54 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jackyap84 @ Jul 27 2011, 09:53 AM)
erm... doubt of it... but still will get a bit worry lar...
*
A car is a car man. Not a place for u to make love in sweat.gif
stormaker
post Jul 27 2011, 10:37 AM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(xandras @ Jul 27 2011, 09:54 AM)
A car is a car man. Not a place for u to make love in sweat.gif
*
unless u're driving MPV ... multi-purpose vehicle tongue.gif
jackyap84
post Jul 27 2011, 10:55 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(xandras @ Jul 27 2011, 09:54 AM)
A car is a car man. Not a place for u to make love in sweat.gif
*
never meant to ML inside the car... blush.gif
TSxandras
post Jul 27 2011, 10:58 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(stormaker @ Jul 27 2011, 10:37 AM)
unless u're driving MPV ... multi-purpose vehicle  tongue.gif
*
laugh.gif Nah.. In car too adventurous for me liao..brows.gif Unless my car is like the 1 used to transport the POTUS, bulletproof panels n windows with pitch black tint.. Then maybe I'll try.. brows.gif
Sesar unjur
post Jul 27 2011, 10:58 AM

Getting Started
**
Junior Member
118 posts

Joined: Dec 2009
From: ipoh


where in ipoh,recommended shop for car tinted?

TSxandras
post Jul 27 2011, 11:00 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Sesar unjur @ Jul 27 2011, 10:58 AM)
where in ipoh,recommended shop for car tinted?
*
laugh.gif I'm not from ipoh.. Not sure man.. But Penang got quite a lot of reputable tint shops lah.. that's if u dun mind driving an hour there to tint ur car.. laugh.gif
zapdos9
post Jul 27 2011, 11:05 AM

chittychitty bangbang
****
Senior Member
523 posts

Joined: Aug 2005
From: Another Dimensioin


QUOTE(ZenGTMM @ Jul 27 2011, 01:25 AM)
This weekend not free.. have to go work.. I will be in PC fair.. hehe..
its for giving tension to the belt.. so ur belt dont slip while running and cause the screeching noise..
*
Fair till 10pm only ma. After that TT la. Bring some hot chicks along from there if u TT brows.gif
TSxandras
post Jul 27 2011, 11:08 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(zapdos9 @ Jul 27 2011, 11:05 AM)
Fair till 10pm only ma. After that TT la. Bring some hot chicks along from there if u TT brows.gif
*
zapdos wanna come? brows.gif
ZenGTMM
post Jul 27 2011, 11:13 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 10:58 AM)
laugh.gif Nah.. In car too adventurous for me liao..brows.gif Unless my car is like the 1 used to transport the POTUS, bulletproof panels n windows with pitch black tint.. Then maybe I'll try.. brows.gif
*
:S.. U so scared ppl see u meh.. Thats the exciting part mah.. The fear of getting caught creates a lot of sexual tension.. biggrin.gif

QUOTE(zapdos9 @ Jul 27 2011, 11:05 AM)
Fair till 10pm only ma. After that TT la. Bring some hot chicks along from there if u TT brows.gif
*
the next day still got fair leh.. Have to go home sleep first.. tongue.gif Sunday night only bring them out if there is any..
TSxandras
post Jul 27 2011, 11:16 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 11:13 AM)
:S.. U so scared ppl see u meh.. Thats the exciting part mah.. The fear of getting caught creates a lot of sexual tension..  biggrin.gif
the next day still got fair leh.. Have to go home sleep first..  tongue.gif  Sunday night only bring them out if there is any..
*
laugh.gif That's because I kena tangkap basah before.. xD
ZenGTMM
post Jul 27 2011, 11:21 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 11:16 AM)
laugh.gif That's because I kena tangkap basah before.. xD
*
Haiz.. Cerita habis for u..
TSxandras
post Jul 27 2011, 11:22 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 11:21 AM)
Haiz.. Cerita habis for u..
*
Not actually tangkap basah la.. Just got caught while in the heat with a CKT.. lucky havent naked yet.. XD
ZenGTMM
post Jul 27 2011, 11:23 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 11:22 AM)
Not actually tangkap basah la.. Just got caught while in the heat with a CKT.. lucky havent naked yet.. XD
*
Like that also phobia.. haiz..
TSxandras
post Jul 27 2011, 11:27 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 11:23 AM)
Like that also phobia.. haiz..
*
laugh.gif Normally NL love in car actions ma.. Kena tangkap with NL means gone case wan leh.. brows.gif Still it's more comfortable & higher sexual tension to do it at the balcony of a nice hotel overlooking the city.. brows.gif

Thought u say got briefing wan?
dorinyeah
post Jul 27 2011, 11:39 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(ZenGTMM @ Jul 27 2011, 12:46 AM)
DAMN U ALL SPAM SO MUCH..1 day i not online have to read 13pages..
U can start by banging KKW's car.. His HID foglamp so so so damn bluish bright.. It hurts just to look at his car.. looks like its 6500K brightness..
And not to forget use thicker lubricants too to provide maximum lubrication..
1.6 to 1.8 is called stroking the engine..
got a lot of difference.. The main thing is to fit in good tires which gives good grip.. Better got for 17".. It feels very grippy and fits the tire well very well..
Nope same day.. Went to buy it last sat.. Saw it so cheap so straight bought it without thinking twice..
But have ady done ur exhaust piping right? Why need to redo again? Is ur exhaust only 1 midbox? Change it to 1x 12" swirl bullet and 1x 9" straight bullet.. A lot of extra power can be gained.
Did u all noticed that the Shell Helix Ultra does not pass the BMW LL-04 test? That means there is something wrong with the stability of the oil if its kept in the engine for an extended period of time.
Its around the same.. Save for that the Edge sport is slightly thinner than the normal edge.. So when i use edge sport.. Sure i can gain some extra horsies under the hood.. haha..
Im gonna  try that for my next service.. Xan have used the Edge biasa only.. Now lets see if edge sport can give me more tapau-ing power!!
Got meh?? U are so thin wei... unless ur bones made from cast iron lah.. LOLz..
Dont really know the cause.. Just give a complaint to the SC when u do ur service.. Let them tightened the undercarriage and see if the noise is still there.
u dont know how much damage 3 days of high speed revving can do to ur siham engine! XD..
And as we all know his siham is Shell punya quality.. Cant last that long also.. biggrin.gif
Mine still no knocking sound.. hehe..
Got so much or not? 10hp no play play leh..
I are Legen wait-for-it dary!!
Damn.. My car tinted dark dark.. The ghost can see through or not?
*
Ghost no need to see from outside, can slip into ur car sit next to u.... whistling.gif

QUOTE(KKW @ Jul 27 2011, 01:06 AM)
Serdang sc?
Tomorrow I'm going there.. want to join me?  smile.gif
*
come Cose la

QUOTE(xandras @ Jul 27 2011, 01:52 AM)
The first thing I noticed was..

..doinggg...doinggg...doingggkk... brows.gif
*
doggy doggy dooooggy

QUOTE(xandras @ Jul 27 2011, 11:22 AM)
Not actually tangkap basah la.. Just got caught while in the heat with a CKT.. lucky havent naked yet.. XD
*
hehee... after tat how? ear twist until drop?
adriankhoo153
post Jul 27 2011, 11:44 AM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
Bought my car to SC liau. Bring my own lube. Castro Magnatec. Cost me Rm95 for the oil.
jackyap84
post Jul 27 2011, 11:45 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(xandras @ Jul 27 2011, 11:00 AM)
laugh.gif I'm not from ipoh.. Not sure man.. But Penang got quite a lot of reputable tint shops lah.. that's if u dun mind driving an hour there to tint ur car.. laugh.gif
*
then will be additional cost for it...
dzie25
post Jul 27 2011, 11:47 AM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
Wah.. you all so fast.... Sweat........ My car is bronze with AT.... Puchong area........ Now service the car.. power window got problem. I thinking 16inch with lower the car.. he he
Fubar20
post Jul 27 2011, 11:50 AM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(adriankhoo153 @ Jul 27 2011, 11:44 AM)
Bought my car to SC liau. Bring my own lube. Castro Magnatec. Cost me Rm95 for the oil.
*
Which SC is it? At least TS can update which SC can bring own lube one.
adriankhoo153
post Jul 27 2011, 12:00 PM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
QUOTE(Fubar20 @ Jul 27 2011, 11:50 AM)
Which SC is it? At least TS can update which SC can bring own lube one.
*
Intan Matang at Shah Alam (Sri Muda)
Fubar20
post Jul 27 2011, 12:19 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(adriankhoo153 @ Jul 27 2011, 12:00 PM)
Intan Matang at Shah Alam (Sri Muda)
*
Thats quite near to where I'm working. You staying near there?
KKW
post Jul 27 2011, 12:23 PM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(dorinyeah @ Jul 27 2011, 11:39 AM)
Ghost no need to see from outside, can slip into ur car sit next to u.... whistling.gif
come Cose la
doggy doggy dooooggy
hehee... after tat how? ear twist until drop?
*
Cannot.. my claim part reach serdang sc already..
So sekali service lo smile.gif
jasonloh7906
post Jul 27 2011, 01:25 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(jackyap84 @ Jul 27 2011, 09:47 AM)
sure or not?


Added on July 27, 2011, 9:51 am

is this the best location for the day light led place? any better area fit tis in?
*
hahaha~~no restriction. its up to you.~~
K.Lee
post Jul 27 2011, 02:02 PM

New Member
*
Junior Member
10 posts

Joined: Feb 2010
QUOTE(ZenGTMM @ Jul 27 2011, 02:10 AM)
Omg this is so joke sections worthy.. hahah...
Nope it wont.. It will add more dust in cos the dust from outside ur car can enter through the opened window.
*
Might not be a joke man, if you smoke, and you only wind down 1 of the window, the smoke will be sucked out like a vacum... as for dust i dunno... hmm.gif
jackyap84
post Jul 27 2011, 02:17 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(KKW @ Jul 27 2011, 12:23 PM)
Cannot.. my claim part reach serdang sc already..
So sekali service lo  smile.gif
*
wat u claimed?
TSxandras
post Jul 27 2011, 02:35 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dzie25 @ Jul 27 2011, 11:47 AM)
Wah.. you all so fast.... Sweat........ My car is bronze with AT.... Puchong area........ Now service the car.. power window got problem. I thinking 16inch with lower the car.. he he
*
Line? rclxub.gif

QUOTE(adriankhoo153 @ Jul 27 2011, 12:00 PM)
Intan Matang at Shah Alam (Sri Muda)
*
Owh.. Will update it soon..

QUOTE(K.Lee @ Jul 27 2011, 02:02 PM)
Might not be a joke man, if you smoke, and you only wind down 1 of the window, the smoke will be sucked out like a vacum... as for dust i dunno... hmm.gif
*
It depends how u drive and how are the windows opened. If all 4 windows are opened & u're smoking in front, the wind will blow the cig smoke from u to the rear before escaping out of the window. If u open only 1 front window, the smoke will get trapped in the car. If u open both front windows, the air flow will be higher but the smoke will still get trapped at the rear. It doesn't work the same way with dust because smoke (gas) is lighter than dust (particles), and dust sticks to the surface while gas doesnt (Well, at least the smell does!).
dorinyeah
post Jul 27 2011, 02:47 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


darn...Magnatec at tesco is RM99.90 now...price up already! deng!
adriankhoo153
post Jul 27 2011, 02:48 PM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
QUOTE(Fubar20 @ Jul 27 2011, 12:19 PM)
Thats quite near to where I'm working. You staying near there?
*
Nope, near my work place in Shah Alam Sek 15.
Fubar20
post Jul 27 2011, 02:53 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(dorinyeah @ Jul 27 2011, 02:47 PM)
darn...Magnatec at tesco is RM99.90 now...price up already! deng!
*
Since last week lo.
QUOTE(adriankhoo153 @ Jul 27 2011, 02:48 PM)
Nope, near my work place in Shah Alam Sek 15.
*
So near my working place ar Sek 16. U work for Toyota? hmm.gif
azeotrope
post Jul 27 2011, 02:54 PM

New Member
*
Junior Member
25 posts

Joined: May 2009


QUOTE(xandras @ Jul 27 2011, 02:35 PM)
Line? rclxub.gif
Owh.. Will update it soon..
It depends how u drive and how are the windows opened. If all 4 windows are opened & u're smoking in front, the wind will blow the cig smoke from u to the rear before escaping out of the window. If u open only 1 front window, the smoke will get trapped in the car. If u open both front windows, the air flow will be higher but the smoke will still get trapped at the rear. It doesn't work the same way with dust because smoke (gas) is lighter than dust (particles), and dust sticks to the surface while gas doesnt (Well, at least the smell does!).
*
alternatively, u can do like my friend is doing...
open driver's side window(right,front) and rear co-pilot's window(left,back)
adriankhoo153
post Jul 27 2011, 02:56 PM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
QUOTE(Fubar20 @ Jul 27 2011, 02:53 PM)
Since last week lo.

So near my working place ar Sek 16. U work for Toyota?  hmm.gif
*
Nope.. tongue.gif
Btw, here is the review of Intan Matang SC by other ppl.

http://kereta.info/best-service-centers-for-your-car/
TSxandras
post Jul 27 2011, 03:03 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(azeotrope @ Jul 27 2011, 02:54 PM)
alternatively, u can do like my friend is doing...
open driver's side window(right,front) and rear co-pilot's window(left,back)
*
It's the dust.. Not the smoke that's the problem.. dust sticks to our dashboard n rear speaker deck like glue.. Damn sien..
Fubar20
post Jul 27 2011, 03:11 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(adriankhoo153 @ Jul 27 2011, 02:56 PM)
Nope..  tongue.gif
Btw, here is the review of Intan Matang SC by other ppl.

http://kereta.info/best-service-centers-for-your-car/
*
Thanks for the info. Maybe will try to service there later. Need to book first?
adriankhoo153
post Jul 27 2011, 03:17 PM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
QUOTE(Fubar20 @ Jul 27 2011, 03:11 PM)
Thanks for the info. Maybe will try to service there later. Need to book first?
*
For me normally i jes leave my car there. Didnt make booking b4. This is actually my second time here. Quite ok. Good free mineral water and menthols candy.. tongue.gif
Also if normal service they gurantee 60 minutes express service and if not FOC. rclxms.gif
Duno their T&C though.. unsure.gif
adriankhoo153
post Jul 27 2011, 03:17 PM

So many star for what?
*******
Senior Member
4,808 posts

Joined: Sep 2006
QUOTE(dorinyeah @ Jul 27 2011, 02:47 PM)
darn...Magnatec at tesco is RM99.90 now...price up already! deng!
*
I got it for RM95 at Shah Alam sparepart shop.
dzie25
post Jul 27 2011, 03:18 PM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
=.=lll persona. Auto. Bline. Bronze.... He he.... I want change rim....... But ...... No idea at all....
TSxandras
post Jul 27 2011, 03:24 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dzie25 @ Jul 27 2011, 03:18 PM)
=.=lll persona. Auto. Bline. Bronze.... He he.... I want change rim....... But ...... No idea at all....
*
If got budget u wan nice rims with nice tyres sure can get wan.. brows.gif
Fubar20
post Jul 27 2011, 03:29 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(adriankhoo153 @ Jul 27 2011, 03:17 PM)
For me normally i jes leave my car there. Didnt make booking b4. This is actually my second time here. Quite ok. Good free mineral water and menthols candy..  tongue.gif
Also if normal service they gurantee 60 minutes express service and if not FOC.  rclxms.gif
Duno their T&C though..  unsure.gif
*
Ok. Think there are a few SC which offer this 60 minutes express service. Got the brochure from COSE.

QUOTE(adriankhoo153 @ Jul 27 2011, 03:17 PM)
I got it for RM95 at Shah Alam sparepart shop.
*
Ya, have to survey a bit lah if want to get cheap.
vccy
post Jul 27 2011, 03:37 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


My car sometime quite hard to start after the 1st start. Last week got a member complain the same thing right. I am servicing soon next months. what should i told them to check? The crank starter?
TSxandras
post Jul 27 2011, 03:52 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 27 2011, 03:37 PM)
My car sometime quite hard to start after the 1st start. Last week got a member complain the same thing right. I am servicing soon next months. what should i told them to check? The crank starter?
*
Crank sensor & ur battery.
dorinyeah
post Jul 27 2011, 03:52 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(adriankhoo153 @ Jul 27 2011, 03:17 PM)
I got it for RM95 at Shah Alam sparepart shop.
*
my fren told me jalan ipoh spare part shop sell 90... next time should go there buy!

stormaker
post Jul 27 2011, 03:54 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


I like this rim ...

user posted image
user posted image
TSxandras
post Jul 27 2011, 03:56 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(stormaker @ Jul 27 2011, 03:54 PM)
I like this rim ...

user posted image
user posted image
*
.....
dorinyeah
post Jul 27 2011, 04:00 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(stormaker @ Jul 27 2011, 03:54 PM)
I like this rim ...

user posted image
user posted image
*
me too, how much? 16" or 17"??
vccy
post Jul 27 2011, 04:04 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(stormaker @ Jul 27 2011, 04:54 PM)
I like this rim ...

user posted image
user posted image
*
sweat.gif That is TS previous rims. Go 1st page look under Genting TT photos.

QUOTE(xandras @ Jul 27 2011, 04:56 PM)
.....
*
Kinda flash back your old memories? brows.gif

QUOTE(dorinyeah @ Jul 27 2011, 05:00 PM)
me too, how much? 16" or 17"??
*
16"
stormaker
post Jul 27 2011, 04:06 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(xandras @ Jul 27 2011, 03:56 PM)
.....
*
QUOTE(vccy @ Jul 27 2011, 04:04 PM)
sweat.gif That is TS previous rims. Go 1st page look under Genting TT photos.
Kinda flash back your old memories?  brows.gif
16"
*
lol ...
dorinyeah
post Jul 27 2011, 04:07 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(vccy @ Jul 27 2011, 04:04 PM)
sweat.gif That is TS previous rims. Go 1st page look under Genting TT photos.
Kinda flash back your old memories?  brows.gif
16"
*
is R3 Ori rims right. how much then?
stormaker
post Jul 27 2011, 04:08 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(dorinyeah @ Jul 27 2011, 04:07 PM)
is R3 Ori rims right. how much then?
*
should ask xan how much he bought ... mudah.my n automotive garage got ppl selling ... i think 1850 ... kinda expensive.

This post has been edited by stormaker: Jul 27 2011, 04:09 PM
dorinyeah
post Jul 27 2011, 04:08 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


http://forum.lowyat.net/topic/1974397
is 1850

This post has been edited by dorinyeah: Jul 27 2011, 04:09 PM
stormaker
post Jul 27 2011, 04:11 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(dorinyeah @ Jul 27 2011, 04:08 PM)
yeah lo ... expensive.
vccy
post Jul 27 2011, 04:12 PM

Getting Started
**
Junior Member
227 posts

Joined: Oct 2007
From: MELAKA


QUOTE(stormaker @ Jul 27 2011, 05:08 PM)
should ask xan how much he bought ... mudah.my n automotive garage got ppl selling ... i think 1850 ... kinda expensive.
*
this is a light weight sport rims. Some more it is limited edition from R3. Won expect cheap lo. whistling.gif
dorinyeah
post Jul 27 2011, 04:22 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


this gooding??
1 Malaysia underwear
http://forum.lowyat.net/topic/1973875
Fubar20
post Jul 27 2011, 04:23 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(dorinyeah @ Jul 27 2011, 04:22 PM)
this gooding??
1 Malaysia underwear
http://forum.lowyat.net/topic/1973875
*
Haha..... Where's the BERSIH underwear? hmm.gif laugh.gif
dorinyeah
post Jul 27 2011, 04:25 PM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(Fubar20 @ Jul 27 2011, 04:23 PM)
Haha..... Where's the BERSIH underwear? hmm.gif  laugh.gif
*
u want wear like superman to let ppl see u support bersih??
Fubar20
post Jul 27 2011, 04:27 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(dorinyeah @ Jul 27 2011, 04:25 PM)
u want wear like superman to let ppl see u support bersih??
*
rclxub.gif I thought Superman one is wearing 1Malaysia outside and the BERSIH one inside. brows.gif
jasonloh7906
post Jul 27 2011, 04:59 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(stormaker @ Jul 27 2011, 03:54 PM)
I like this rim ...

user posted image
user posted image
*
i like the tyre XD
this R3 rim expensive leh~~


Added on July 27, 2011, 5:00 pm
QUOTE(vccy @ Jul 27 2011, 04:12 PM)
this is a light weight sport rims. Some more it is limited edition from R3. Won expect cheap lo.  whistling.gif
*
so now where his rim went to??


Added on July 27, 2011, 5:01 pmone question. light weight rim got wat pros and cons ??

This post has been edited by jasonloh7906: Jul 27 2011, 05:01 PM
Fubar20
post Jul 27 2011, 05:06 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(jasonloh7906 @ Jul 27 2011, 04:59 PM)
i like the tyre XD
this R3 rim expensive leh~~


Added on July 27, 2011, 5:00 pm
so now where his rim went to??


Added on July 27, 2011, 5:01 pmone question. light weight rim got wat pros and cons ??
*
You mean TS ex car rims? Went to Unknownhammie.
jasonloh7906
post Jul 27 2011, 05:07 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(Fubar20 @ Jul 27 2011, 05:06 PM)
You mean TS ex car rims? Went to Unknownhammie.
*
oic. hahaha~~that rim nice.
TSxandras
post Jul 27 2011, 05:32 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(vccy @ Jul 27 2011, 04:04 PM)
sweat.gif That is TS previous rims. Go 1st page look under Genting TT photos.
Kinda flash back your old memories?  brows.gif
16"
*
...yea.. cry.gif

QUOTE(dorinyeah @ Jul 27 2011, 04:07 PM)
is R3 Ori rims right. how much then?
*
I got it for RM 1500 plus.

QUOTE(jasonloh7906 @ Jul 27 2011, 04:59 PM)
i like the tyre XD
this R3 rim expensive leh~~


Added on July 27, 2011, 5:00 pm
so now where his rim went to??


Added on July 27, 2011, 5:01 pmone question. light weight rim got wat pros and cons ??
*
Depends on the material that the rim is made out of. Pros, better handling, better acceleration, better FC. Cons, less stable on very high speeds compared to heavier rims, easier to dent.

QUOTE(Fubar20 @ Jul 27 2011, 05:06 PM)
You mean TS ex car rims? Went to Unknownhammie.
*
cry.gif

QUOTE(jasonloh7906 @ Jul 27 2011, 05:07 PM)
oic. hahaha~~that rim nice.
*
Limited edition with 8 holes and gunmetal finish at the sides, silver finish on the spokes.. Standard R3 rims only comes with full gunmetal or full silver colour, & available only in 4 & 5 holes variants.
Fubar20
post Jul 27 2011, 05:39 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(xandras @ Jul 27 2011, 05:32 PM)
...yea.. cry.gif
I got it for RM 1500 plus.
Depends on the material that the rim is made out of. Pros, better handling, better acceleration, better FC. Cons, less stable on very high speeds compared to heavier rims, easier to dent.
cry.gif
Limited edition with 8 holes and gunmetal finish at the sides, silver finish on the spokes.. Standard R3 rims only comes with full gunmetal or full silver colour, & available only in 4 & 5 holes variants.
*
laugh.gif Don't be sad, Xan. Old don't go away, new won't arrive. Think about ur CKT and your 159. brows.gif
TSxandras
post Jul 27 2011, 05:41 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Fubar20 @ Jul 27 2011, 05:39 PM)
laugh.gif Don't be sad, Xan. Old don't go away, new won't arrive. Think about ur CKT and your 159.  brows.gif
*
LoL... Haiz.. My modding days are over.. Now time to get a real gentleman's car without mods & live with it.. laugh.gif
jasonloh7906
post Jul 27 2011, 05:42 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 05:32 PM)
...yea.. cry.gif
I got it for RM 1500 plus.
Depends on the material that the rim is made out of. Pros, better handling, better acceleration, better FC. Cons, less stable on very high speeds compared to heavier rims, easier to dent.
cry.gif
Limited edition with 8 holes and gunmetal finish at the sides, silver finish on the spokes.. Standard R3 rims only comes with full gunmetal or full silver colour, & available only in 4 & 5 holes variants.
*
wow...u bought it cheap. hahahaha~~in proton website it cost RM2999. wat if the rim is dented?? wat will happen??

QUOTE(xandras @ Jul 27 2011, 05:41 PM)
LoL... Haiz.. My modding days are over.. Now time to get a real gentleman's car without mods & live with it.. laugh.gif
*
hahaha~~i suppose i will be saying this after a few more years.
TSxandras
post Jul 27 2011, 05:47 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 05:42 PM)
wow...u bought it cheap. hahahaha~~in proton website it cost RM2999. wat if the rim is dented?? wat will happen??
hahaha~~i suppose i will be saying this after a few more years.
*
Proton website quotes the rims together with Bridgestone Potenza RE001 tyres. If u were to get the same tyres outside, total cost together with the rims will easily cost close to that figure. Last time I paired the R3 rims with Yokohama S-Drive. Best combination I've ever seen. Looks much fiercer than Potenza.

If the rim is dented ur car's balancing ma gone lo.. Steering wobbles when u speed lo.. The rims wont look good lor with a dent there..


Added on July 27, 2011, 5:55 pm


brows.gif

This post has been edited by xandras: Jul 27 2011, 05:55 PM
jackyap84
post Jul 27 2011, 06:10 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(dorinyeah @ Jul 27 2011, 02:47 PM)
darn...Magnatec at tesco is RM99.90 now...price up already! deng!
*
u no luck lor...


Added on July 27, 2011, 6:10 pm
QUOTE(stormaker @ Jul 27 2011, 03:54 PM)
I like this rim ...

user posted image
user posted image
*
i guess one of our member here using this rim...

This post has been edited by jackyap84: Jul 27 2011, 06:10 PM
Dav6534
post Jul 27 2011, 06:20 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(jackyap84 @ Jul 27 2011, 06:10 PM)
u no luck lor...


Added on July 27, 2011, 6:10 pm

i guess one of our member here using this rim...
*
this rim yeng. i ask once then the pricing shock me kaw kaw so i dont want le. haha. im looking at enkei es6 now.


Attached thumbnail(s)
Attached Image
stormaker
post Jul 27 2011, 06:48 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(jasonloh7906 @ Jul 27 2011, 05:42 PM)
wow...u bought it cheap. hahahaha~~in proton website it cost RM2999. wat if the rim is dented?? wat will happen??
hahaha~~i suppose i will be saying this after a few more years.
*
can give me the link or not ? smile.gif
TSxandras
post Jul 27 2011, 06:51 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



R3 Price
ngeo88
post Jul 27 2011, 06:52 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(Dav6534 @ Jul 27 2011, 06:20 PM)
this rim yeng. i ask once then the pricing shock me kaw kaw so i dont want le. haha. im looking at enkei es6 now.
*
i ask before and new original Enkei rim are easily over RM 1500 and the supplier cannot commit the delivery date and when it will arrive if i place order. But must be very careful cos lot of fake Enkei around the shop, during my survey 70% of the Japan rim here are fake product.


Added on July 27, 2011, 6:53 pm
QUOTE(stormaker @ Jul 27 2011, 06:48 PM)
can give me the link or not ?  smile.gif
*
but 2999 include tyer bridgestone

This post has been edited by ngeo88: Jul 27 2011, 06:53 PM
Dav6534
post Jul 27 2011, 06:55 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ngeo88 @ Jul 27 2011, 06:52 PM)
i ask before and new original Enkei rim are easily over RM 1500 and the supplier cannot commit the delivery date and when it will arrive if i place order. But must be very careful cos lot of fake Enkei around the shop, during my survey 70% of the Japan rim here are fake product.


Added on July 27, 2011, 6:53 pm
but 2999 include tyer bridgestone
*
hmm then need to go thru a few shops le to make sure its real. enkei rims are actually engineered very well that's why i thought of getting it.
stormaker
post Jul 27 2011, 06:56 PM

Look at all my stars!!
*******
Senior Member
3,130 posts

Joined: Jun 2006


QUOTE(xandras @ Jul 27 2011, 06:51 PM)
Thanks Thanks ! thumbup.gif

QUOTE(ngeo88 @ Jul 27 2011, 06:52 PM)
i ask before and new original Enkei rim are easily over RM 1500 and the supplier cannot commit the delivery date and when it will arrive if i place order. But must be very careful cos lot of fake Enkei around the shop, during my survey 70% of the Japan rim here are fake product.


Added on July 27, 2011, 6:53 pm
but 2999 include tyer bridgestone
*
how u know its fake or genuine ?
TSxandras
post Jul 27 2011, 07:01 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(stormaker @ Jul 27 2011, 06:56 PM)
Thanks Thanks !  thumbup.gif
how u know its fake or genuine ?
*
That's the thing. Very hard to determine as most Taiwanese 'fake' japanese enkei rims are almost as light as the original Japs. Get the custom declaration letter lo. Easiest solution. Or buy straight from Japan & import urself, pay the duties urself.


Added on July 27, 2011, 7:04 pm
QUOTE(ngeo88 @ Jul 27 2011, 06:52 PM)
i ask before and new original Enkei rim are easily over RM 1500 and the supplier cannot commit the delivery date and when it will arrive if i place order. But must be very careful cos lot of fake Enkei around the shop, during my survey 70% of the Japan rim here are fake product.


Added on July 27, 2011, 6:53 pm
but 2999 include tyer bridgestone
*
Bridgestone 16 inch tyres RM 350 each. RM 350 x 4 = RM 1400. U go outside get Yokohama S-Drive, which the wet traction is a tad better than RE001 at the same 16 inch size also costs about the same.

This post has been edited by xandras: Jul 27 2011, 07:06 PM
dzie25
post Jul 27 2011, 07:08 PM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
Woot... 3k... Are proton part more expensive when get it from outside??actually my budget in below 2k ..
TSxandras
post Jul 27 2011, 07:10 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dzie25 @ Jul 27 2011, 07:08 PM)
Woot... 3k... Are proton part more expensive when get it from outside??actually my budget in below 2k ..
*
Below 2k? Taiwan cap ayam 16" rims with cap ayam tyres lo.. laugh.gif
ckdenion
post Jul 27 2011, 07:18 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(jasonloh7906 @ Jul 27 2011, 12:38 AM)
lol...i also wan that headlamp. wait till i got budget then i change XD
this headlamp=hotbit.
oh. i understand wat u mean. hahahaaha~~coz that pic i got snap b4 mah. front view din snap. i will take the pic 2moro. wat bout ur car??
*
my car got no mods wor...

QUOTE(jackyap84 @ Jul 27 2011, 09:47 AM)
is this the best location for the day light led place? any better area fit tis in?
*
depends where u want to install n where u think it is nice...
based on ur own creativity...
jasonloh7906
post Jul 27 2011, 07:46 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ckdenion @ Jul 27 2011, 07:18 PM)
my car got no mods wor...
depends where u want to install n where u think it is nice...
based on ur own creativity...
*
hahahaha~~ur car still new still new. and it look better than mine lah.

QUOTE(xandras @ Jul 27 2011, 05:32 PM)
...yea.. cry.gif
I got it for RM 1500 plus.
Depends on the material that the rim is made out of. Pros, better handling, better acceleration, better FC. Cons, less stable on very high speeds compared to heavier rims, easier to dent.
cry.gif
Limited edition with 8 holes and gunmetal finish at the sides, silver finish on the spokes.. Standard R3 rims only comes with full gunmetal or full silver colour, & available only in 4 & 5 holes variants.
*
so wat material will be better?? will it affect braking?? i think can still go stable bcoz of persona weight.
wat is went to unknown hammie btw??

QUOTE(xandras @ Jul 27 2011, 05:47 PM)
Proton website quotes the rims together with Bridgestone Potenza RE001 tyres. If u were to get the same tyres outside, total cost together with the rims will easily cost close to that figure. Last time I paired the R3 rims with Yokohama S-Drive. Best combination I've ever seen. Looks much fiercer than Potenza.

If the rim is dented ur car's balancing ma gone lo.. Steering wobbles when u speed lo.. The rims wont look good lor with a dent there..


Added on July 27, 2011, 5:55 pm


brows.gif
*
i tot RE001 is not in the market edi?? wat will cost the rim dent??going into potholes??
the S-drive also cost quite high. maybe i go for the C-drive. hmm...it comes with tyre. so it still ok lah the price. but where to buy if u wan to buy from proton??the best way to avoid fake R3 rims.
TSxandras
post Jul 27 2011, 07:53 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 07:46 PM)
hahahaha~~ur car still new still new. and it look better than mine lah.
so wat material will be better?? will it affect braking?? i think can still go stable bcoz of persona weight.
wat is went to unknown hammie btw??
i tot RE001 is not in the market edi?? wat will cost the rim dent??going into potholes??
the S-drive also cost quite high. maybe i go for the C-drive. hmm...it comes with tyre. so it still ok lah the price. but where to buy if u wan to buy from proton??the best way to avoid fake R3 rims.
*
Where else to buy if u wanna buy from Proton? laugh.gif

No, ur tyre width is the 1 that affects ur braking greatly. Try to install some lightweight 15 inch rims & go high speed with PE.. U'll feel like it's floating more than using ur standard rims..

My R3 rims went to unknownhammie's ride. Get it? sweat.gif

Well then it's ur luck whether u can still find RE001 stock manufactured early this year lying around in tyre shops..

S-Drive cost high? If u dun mind sacrificing the wet grip & cornering then go for C-drive la.. smile.gif
jasonloh7906
post Jul 27 2011, 07:59 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ckdenion @ Jul 27 2011, 07:18 PM)
my car got no mods wor...
depends where u want to install n where u think it is nice...
based on ur own creativity...
*
this is the pic u mean?? really not good in taking picture.
XD sudah lap my car can see my reflection. so scare wat should i do if my paint color fade.

user posted image
user posted image

Dav6534
post Jul 27 2011, 08:00 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
yo xand. today i saw one damn yeng bbs rim on a pe. i was like wtf when i saw it.
TSxandras
post Jul 27 2011, 08:03 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 07:59 PM)
this is the pic u mean?? really not good in taking picture.
XD sudah lap my car can see my reflection. so scare wat should i do if my paint color fade.

user posted image
user posted image
*
Then ma carry out the prevention methods first lo..

QUOTE(Dav6534 @ Jul 27 2011, 08:00 PM)
yo xand. today i saw one damn yeng bbs rim on a pe. i was like wtf when i saw it.
*
laugh.gif Tell Zeng that.. He's a big fan of a 18 inch BBS 4 pot rim that he saw at Rampai.. brows.gif
jasonloh7906
post Jul 27 2011, 08:04 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 07:53 PM)
Where else to buy if u wanna buy from Proton? laugh.gif

No, ur tyre width is the 1 that affects ur braking greatly. Try to install some lightweight 15 inch rims & go high speed with PE.. U'll feel like it's floating more than using ur standard rims..

My R3 rims went to unknownhammie's ride. Get it? sweat.gif

Well then it's ur luck whether u can still find RE001 stock manufactured early this year lying around in tyre shops..

S-Drive cost high? If u dun mind sacrificing the wet grip & cornering then go for C-drive la.. smile.gif
*
not high meh?? how much is the S-drive?? around the same as RE001??

recently my braking like no power maybe bcoz i dun dare to brake harder edi. tyre going to bald. hahaha...oic. so when u install urs u feel floating when speeding??

C-drive got no wet grip and cornering?? if u say less than S-drive i can understand lah. coz price also different.


Added on July 27, 2011, 8:06 pm
QUOTE(xandras @ Jul 27 2011, 08:03 PM)
Then ma carry out the prevention methods first lo..
laugh.gif Tell Zeng that.. He's a big fan of a 18 inch BBS 4 pot rim that he saw at Rampai.. brows.gif
*
prevention like?? my car always get dirty lah. and my windscreen always hit thing. i think my whole windscreen going to break.

This post has been edited by jasonloh7906: Jul 27 2011, 08:06 PM
dzie25
post Jul 27 2011, 08:09 PM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
Huh. Didn't know bout that... Looks like is time to saved more money. Cuz I thought below 2k can get it...
jasontantenghuat
post Jul 27 2011, 08:09 PM

Casual
***
Junior Member
337 posts

Joined: Jul 2009


QUOTE(dorinyeah @ Jul 25 2011, 11:02 PM)
sweat.gif
wat is total body tuning for??purpose!!
dun fully masuk the batang la...last time i always face it, now i slightly hang out a bit can pump almost full tank then still can pump another RM5-8 like tat only touch full tank line.
i m sure Fubar is cainese...
so damn save FC!!! how to do tat oh...my car langsung cannot do tat lor...
some more ur car back to stock right... may be this is the trick...hard mod then back to stock can save fc
*
I pull out a bit also same.
So far Esso pump can cause it has that extra lock. Most nozzles has 2 locking thingy, esso one has 3. But car damn underpowered after that doh.gif
Dav6534
post Jul 27 2011, 08:13 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 27 2011, 08:03 PM)
Then ma carry out the prevention methods first lo..
laugh.gif Tell Zeng that.. He's a big fan of a 18 inch BBS 4 pot rim that he saw at Rampai.. brows.gif
*
haha. im pretty sure he will see this post then. =P. if compare between bbs and enkei, which would be the better rim?
jackyap84
post Jul 27 2011, 08:39 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(xandras @ Jul 27 2011, 07:01 PM)
That's the thing. Very hard to determine as most Taiwanese 'fake' japanese enkei rims are almost as light as the original Japs. Get the custom declaration letter lo. Easiest solution. Or buy straight from Japan & import urself, pay the duties urself.


Added on July 27, 2011, 7:04 pm
Bridgestone 16 inch tyres RM 350 each. RM 350 x 4 = RM 1400. U go outside get Yokohama S-Drive, which the wet traction is a tad better than RE001 at the same 16 inch size also costs about the same.
*
import ourselves will cost a lot...
TSxandras
post Jul 27 2011, 08:46 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 08:04 PM)
not high meh?? how much is the S-drive?? around the same as RE001??

recently my braking like no power maybe bcoz i dun dare to brake harder edi. tyre going to bald. hahaha...oic. so when u install urs u feel floating when speeding??

C-drive got no wet grip and cornering?? if u say less than S-drive i can understand lah. coz price also different.


Added on July 27, 2011, 8:06 pm
prevention like?? my car always get dirty lah. and my windscreen always hit thing. i think my whole windscreen going to break.
*
Prevention like optiseal..brows.gif I tried installing 14 inch rims on myvi before.. The high speed stability is way worst than stock alloy rims because it's much lighter.. So I changed to 16 inch after that..

C drive is decent lah. Ok lah, S drive is considered the much better counterpart when it comes to wet grip n handling. It's just RM 80 difference per tyre, & since u're changing to a bigger rim, obviously u would expect better performance from ur tyres, rite? So why not spend a bit more to get something better? Take it as an investment for ur own safety..

QUOTE(dzie25 @ Jul 27 2011, 08:09 PM)
Huh. Didn't know bout that... Looks like is time to saved more money. Cuz I thought below 2k can get it...
*
Can get.. But u have to trade in ur stock tyres while it's still new la.. Then u can probably get around RM 150 per tyre for steel rim, up to RM 300 per tyre for stock alloy rim..

QUOTE(jasontantenghuat @ Jul 27 2011, 08:09 PM)
I pull out a bit also same.
So far Esso pump can cause it has that extra lock. Most nozzles has 2 locking thingy, esso one has 3. But car damn underpowered after that doh.gif
*
Car underpowered with esso??blink.gif esso is the best balance between FC n power for our PE wor.. Pls share ur experience..

QUOTE(Dav6534 @ Jul 27 2011, 08:13 PM)
haha. im pretty sure he will see this post then. =P. if compare between bbs and enkei, which would be the better rim?
*
I personally prefer the enkei, only if it's available in 17 inch. Or else it's BBS for me, no questions asked.


Added on July 27, 2011, 8:56 pmQuick!! I wanna see V21 page 21!! laugh.gif

This post has been edited by xandras: Jul 27 2011, 08:56 PM
Dav6534
post Jul 27 2011, 09:02 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 27 2011, 08:46 PM)
Prevention like optiseal..brows.gif I tried installing 14 inch rims on myvi before.. The high speed stability is way worst than stock alloy rims because it's much lighter.. So I changed to 16 inch after that..

C drive is decent lah. Ok lah, S drive is considered the much better counterpart when it comes to wet grip n handling. It's just RM 80 difference per tyre, & since u're changing to a bigger rim, obviously u would expect better performance from ur tyres, rite? So why not spend a bit more to get something better? Take it as an investment for ur own safety..
Can get.. But u have to trade in ur stock tyres while it's still new la.. Then u can probably get around RM 150 per tyre for steel rim, up to RM 300 per tyre for stock alloy rim..
Car underpowered with esso??blink.gif esso is the best balance between FC n power for our PE wor.. Pls share ur experience..
I personally prefer the enkei, only if it's available in 17 inch. Or else it's BBS for me, no questions asked.


Added on July 27, 2011, 8:56 pmQuick!! I wanna see V21 page 21!! laugh.gif
*
the enkei i attach has 3 different sizes. 16" , 17" and 18". brows.gif
TSxandras
post Jul 27 2011, 09:04 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(Dav6534 @ Jul 27 2011, 09:02 PM)
the enkei i attach has 3 different sizes. 16" , 17" and 18".  brows.gif
*
Nice. But did u check whether 17 & 18" are available in 4/8 lugs variant? wink.gif
jasonloh7906
post Jul 27 2011, 09:05 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 08:46 PM)
Prevention like optiseal..brows.gif I tried installing 14 inch rims on myvi before.. The high speed stability is way worst than stock alloy rims because it's much lighter.. So I changed to 16 inch after that..

C drive is decent lah. Ok lah, S drive is considered the much better counterpart when it comes to wet grip n handling. It's just RM 80 difference per tyre, & since u're changing to a bigger rim, obviously u would expect better performance from ur tyres, rite? So why not spend a bit more to get something better? Take it as an investment for ur own safety..
Can get.. But u have to trade in ur stock tyres while it's still new la.. Then u can probably get around RM 150 per tyre for steel rim, up to RM 300 per tyre for stock alloy rim..
Car underpowered with esso??blink.gif esso is the best balance between FC n power for our PE wor.. Pls share ur experience..
I personally prefer the enkei, only if it's available in 17 inch. Or else it's BBS for me, no questions asked.
*
optiseal. hahaha~~expensive lah~~worth meh??
hmm...on myvi. wat bout on your PE after u installed the R3 rims??

only difference of RM80 then can consider lah. then total cost actually difference between RM320. rclxub.gif no lah. mana ada want to change to bigger rim. hahahaha~~tyre now going to botak mah. so change tyre 1st. changing a rim will cost me broke ah. maybe the rim will be after my new tyre botak XD then i have time to save up. will go for other light mod 1st. after i complete the light mod i go for rim. then go on and on and one day i will be saying "My modding days are over.. Now time to get a real gentleman's car without mods & live with it.. " icon_rolleyes.gif difference RM320 if not much better who wanna buy S-drive. hahahaha~~as long as much much much better than stock then ok edi. hahaha~~
maybe quality wise differ in different area??

QUOTE(Dav6534 @ Jul 27 2011, 08:13 PM)
haha. im pretty sure he will see this post then. =P. if compare between bbs and enkei, which would be the better rim?
*
for me, i think is not the brand but is whether the rim attract the owner. XD

QUOTE(jasontantenghuat @ Jul 27 2011, 08:09 PM)
I pull out a bit also same.
So far Esso pump can cause it has that extra lock. Most nozzles has 2 locking thingy, esso one has 3. But car damn underpowered after that doh.gif
*
i always pump at the slowest speed of the pump. take some time to pump. bcoz all of the fuel tips is to dont pump at full speed which is the last clicks. lol. i dunno since when i follow the instruction.


dzie25
post Jul 27 2011, 09:08 PM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
o.O... 2month tayer acceptable... but from proton they don accept trade in rigt... Sorry.. im too noobie...
TSxandras
post Jul 27 2011, 09:11 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 09:05 PM)
optiseal. hahaha~~expensive lah~~worth meh??
hmm...on myvi. wat bout on your PE after u installed the R3 rims??

only difference of RM80 then can consider lah. then total cost actually difference between RM320.  rclxub.gif no lah. mana ada want to change to bigger rim. hahahaha~~tyre now going to botak mah. so change tyre 1st. changing a rim will cost me broke ah. maybe the rim will be after my new tyre botak XD then i have time to save up. will go for other light mod 1st. after i complete the light mod i go for rim. then go on and on and one day i will be saying "My modding days are over.. Now time to get a real gentleman's car without mods & live with it.. " icon_rolleyes.gif  difference RM320 if not much better who wanna buy S-drive. hahahaha~~as long as much much much better than stock then ok edi. hahaha~~
maybe quality wise differ in different area??
for me, i think is not the brand but is whether the rim attract the owner. XD
i always pump at the slowest speed of the pump. take some time to pump. bcoz all of the fuel tips is to dont pump at full speed which is the last clicks. lol. i dunno since when i follow the instruction.
*
Err.. PE stock rims is 15 inch, the 16 inch R3 rims of course make a difference. Lighter steering feel. Better cornering.

Well it's either u optiseal ur car or wait for swirl marks n scratches to appear then spend money on polishing n waxing..wink.gif

S-Drive made in Japan. C-Drive made in Phillipines. Which one u prefer?whistling.gif S drive much better.. Trust me..wink.gif


Added on July 27, 2011, 9:14 pm@dzie, it's not how old ur tyres are that matters. Its how much u travelled. That's why u buy the rims from outside & install at tyre shop..or u can trade in ur stock rims + tyres for the new tyres as well.. Of course, have to top up a few hundred bucks la..

This post has been edited by xandras: Jul 27 2011, 09:14 PM
jasonloh7906
post Jul 27 2011, 09:18 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 09:11 PM)
Err.. PE stock rims is 15 inch, the 16 inch R3 rims of course make a difference. Lighter steering feel. Better cornering.

Well it's either u optiseal ur car or wait for swirl marks n scratches to appear then spend money on polishing n waxing..wink.gif

S-Drive made in Japan. C-Drive made in Phillipines. Which one u prefer?whistling.gif S drive much better.. Trust me..wink.gif
*
so high speed on PE feel more float on your R3 rims??
hmm...normally i wax myself. but not often. hahahaha~~might need to touch up some small paint. if not i think it will lubang.

wah...i dunno bout that. rclxub.gif recently economy no good. how to afford S-drive lah. cry.gif intro me budget and have better than stock one lah. in term of grip, noise, and life. balance in all if can. hahahaha~~forgive a student with only part time that is enuf to survive only ... sad.gif
Dav6534
post Jul 27 2011, 09:20 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(xandras @ Jul 27 2011, 09:04 PM)
Nice. But did u check whether 17 & 18" are available in 4/8 lugs variant? wink.gif
*
haha. that i forget. tongue.gif
TSxandras
post Jul 27 2011, 09:25 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(jasonloh7906 @ Jul 27 2011, 09:18 PM)
so high speed on PE feel more float on your R3 rims??
hmm...normally i wax myself. but not often. hahahaha~~might need to touch up some small paint. if not i think it will lubang.

wah...i dunno bout that.  rclxub.gif recently economy no good. how to afford S-drive lah.  cry.gif intro me budget and have better than stock one lah. in term of grip, noise, and life. balance in all if can. hahahaha~~forgive a student with only part time that is enuf to survive only ... sad.gif
*
sweat.gif u didn't get it.

The R3 rims are 16 inch, wider & lower profile than stock 15 inch rims. Remember what I told u about the dimensions of the tyre that's also crucial? If 2 rims of different weight but same size is used, u'll feel a much lighter steering & slightly sharper handling with the lighter rim, but when u go fast it's a bit floaty. This different weight = floaty concept only applies to rims of the SAME size.

If budget is a prob.. Go for continental CSC1 then.. Budget performance tyres laugh.gif

QUOTE(Dav6534 @ Jul 27 2011, 09:20 PM)
haha. that i forget.  tongue.gif
*

Added on July 27, 2011, 9:26 pmU forgot? laugh.gif

This post has been edited by xandras: Jul 27 2011, 09:26 PM
dzie25
post Jul 27 2011, 09:26 PM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
Ohh.. I see...... Thanks...... I think rim will be my last option.... I should go for interior first..


Added on July 27, 2011, 9:28 pmThere are so many to learn

This post has been edited by dzie25: Jul 27 2011, 09:28 PM
TSxandras
post Jul 27 2011, 09:29 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dzie25 @ Jul 27 2011, 09:26 PM)
Ohh.. I see...... Thanks......  I think rim will be my last option.... I should go for interior first..


Added on July 27, 2011, 9:28 pmThere are so many to learn
*
laugh.gif u like la.. But if handling & FC is ur main concern.. Changing rims really does help a lot..
ckdenion
post Jul 27 2011, 09:32 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(jasonloh7906 @ Jul 27 2011, 07:59 PM)
this is the pic u mean?? really not good in taking picture.
XD sudah lap my car can see my reflection. so scare wat should i do if my paint color fade.

user posted image
user posted image
*
yaya...dis is d picture...c from front not bad...i will install at d same spot also if i were u...but new pe dun hv d slot like urs already

QUOTE(jasonloh7906 @ Jul 27 2011, 08:04 PM)
prevention like?? my car always get dirty lah. and my windscreen always hit thing. i think my whole windscreen going to break.
*
not that kua cheong la...

QUOTE(xandras @ Jul 27 2011, 08:46 PM)
Quick!! I wanna see V21 page 21!! laugh.gif
*
granted rclxms.gif
dzie25
post Jul 27 2011, 09:33 PM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
Actually there was.... Cuz I was drive to most are lubang lubang road... So for safety and comfortable... I was thought of that.. but seriously I do learn lot of it.. thx xan for ya patient
ckdenion
post Jul 27 2011, 09:34 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(xandras @ Jul 27 2011, 09:29 PM)
laugh.gif u like la.. But if handling & FC is ur main concern.. Changing rims really does help a lot..
*
dis is encouraging me to change rims after i got my hotbit extractor... whistling.gif
TSxandras
post Jul 27 2011, 09:36 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dzie25 @ Jul 27 2011, 09:33 PM)
Actually there was.... Cuz I was drive to most are lubang lubang road... So for safety and comfortable... I was thought of that.. but seriously I do learn lot of it.. thx xan for ya patient
*
Banyak lubang then better stick with high profile tyres lo.. Wan spoil ur rims meh..rclxub.gif

QUOTE(ckdenion @ Jul 27 2011, 09:34 PM)
dis is encouraging me to change rims after i got my hotbit extractor... whistling.gif
*
whistling.gif poison bug..
jackyap84
post Jul 27 2011, 09:47 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


wow... version 21 page 21... and post 21 perhap?
Fubar20
post Jul 27 2011, 09:50 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(jackyap84 @ Jul 27 2011, 09:47 PM)
wow... version 21 page 21... and post 21 perhap?
*
doh.gif 20 posts per page. shakehead.gif
jasontantenghuat
post Jul 27 2011, 10:04 PM

Casual
***
Junior Member
337 posts

Joined: Jul 2009


QUOTE(Fubar20 @ Jul 27 2011, 09:50 PM)
doh.gif 20 posts per page. shakehead.gif
*
Jackyap must have had a very fun night last night brows.gif
miriel10
post Jul 27 2011, 10:08 PM

Casual
***
Junior Member
376 posts

Joined: Dec 2008


QUOTE(ZenGTMM @ Jul 27 2011, 12:46 AM)
But have ady done ur exhaust piping right? Why need to redo again? Is ur exhaust only 1 midbox? Change it to 1x 12" swirl bullet and 1x 9" straight bullet.. A lot of extra power can be gained.
*
I didn't do the piping yet. Stock piping atm. Just changed the extractor, midbox and muffler. I tried asking the shop about installing bullets. It was not recommended since they claimed that my FC will totally increase. But I will consider your option.
Fubar20
post Jul 27 2011, 10:08 PM

Regular
******
Senior Member
1,187 posts

Joined: Apr 2011
From: Nowhere


QUOTE(jasontantenghuat @ Jul 27 2011, 10:04 PM)
Jackyap must have had a very fun night last night brows.gif
*
Surelah. In a car with a CKT and spooked by the 'invisible' thing. sweat.gif
jasonloh7906
post Jul 27 2011, 10:22 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(xandras @ Jul 27 2011, 09:25 PM)
sweat.gif u didn't get it.

The R3 rims are 16 inch, wider & lower profile than stock 15 inch rims. Remember what I told u about the dimensions of the tyre that's also crucial? If 2 rims of different weight but same size is used, u'll feel a much lighter steering & slightly sharper handling with the lighter rim, but when u go fast it's a bit floaty. This different weight = floaty concept only applies to rims of the SAME size.

If budget is a prob.. Go for continental CSC1 then.. Budget performance tyres laugh.gif

Added on July 27, 2011, 9:26 pmU forgot? laugh.gif
*
hahahaha~~i get it edi. means if i do want to change the rim i should get a bigger rim say 16". then wont have the floaty effect. hahahaha~~aiyor. u poison me for performance tyre. but i am more to comfort tyre. the best is balance. hahahaha~~bcoz it best to be comfortable when driving mah. passenger also feel better. also, i seldom speed lah. besides performance tyre, any introduction?? or maybe u are only into performance so u only know those tyre. XD

btw, if i am always encountering pothole and going uneven road, is it not advisable to get lighter rims??..

QUOTE(ckdenion @ Jul 27 2011, 09:32 PM)
yaya...dis is d picture...c from front not bad...i will install at d same spot also if i were u...but new pe dun hv d slot like urs already
not that kua cheong la...
granted rclxms.gif
*
yup. thats the difference. i would prefer the new PE. got more space to mod. the space is so limited for the old persona. is that kua cheong ah~~my windscreen hit by something got one crack tat is quite obvious, then when i wash car can see smaller bits all over the windscreen like paint that peels off.

i actually tot of placing the L-shaped daylight at the red spot i highlighted. XD

user posted image


This post has been edited by jasonloh7906: Jul 27 2011, 10:27 PM
ngeo88
post Jul 27 2011, 10:24 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(jasonloh7906 @ Jul 27 2011, 09:05 PM)
optiseal. hahaha~~expensive lah~~worth meh??
hmm...on myvi. wat bout on your PE after u installed the R3 rims??

only difference of RM80 then can consider lah. then total cost actually difference between RM320.  rclxub.gif no lah. mana ada want to change to bigger rim. hahahaha~~tyre now going to botak mah. so change tyre 1st. changing a rim will cost me broke ah. maybe the rim will be after my new tyre botak XD then i have time to save up. will go for other light mod 1st. after i complete the light mod i go for rim. then go on and on and one day i will be saying "My modding days are over.. Now time to get a real gentleman's car without mods & live with it.. " icon_rolleyes.gif  difference RM320 if not much better who wanna buy S-drive. hahahaha~~as long as much much much better than stock then ok edi. hahaha~~
maybe quality wise differ in different area??
for me, i think is not the brand but is whether the rim attract the owner. XD
i always pump at the slowest speed of the pump. take some time to pump. bcoz all of the fuel tips is to dont pump at full speed which is the last clicks. lol. i dunno since when i follow the instruction.
*
optiseal expansive but worth it lah at least you save time and energy to polish your car optiseal is just spy on and wipre spread to car body thats it, it look in small bottle but you need very little amout to wipe through the whole car. S-drive of cause good wet grip and yes only 80 buck different per tyer but it also sacrify the comfortable check the yokohama page got comparison chart, so far there are no tyer that really compromise confortable and good grip at the same level.
ckdenion
post Jul 27 2011, 10:34 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(jasonloh7906 @ Jul 27 2011, 10:22 PM)
yup. thats the difference. i would prefer the new PE. got more space to mod. the space is so limited for the old persona. is that kua cheong ah~~my windscreen hit by something got one crack tat is quite obvious, then when i wash car can see smaller bits all over the windscreen like paint that peels off.

i actually tot of placing the L-shaped daylight at the red spot i highlighted. XD

user posted image
*
please dun place d daylight led there...u already got 2 there...if got 4...err...i bet xan will say it will look lala...
2 is enuf already...
ZenGTMM
post Jul 27 2011, 10:36 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 27 2011, 11:27 AM)
laugh.gif Normally NL love in car actions ma.. Kena tangkap with NL means gone case wan leh.. brows.gif Still it's more comfortable & higher sexual tension to do it at the balcony of a nice hotel overlooking the city.. brows.gif

Thought u say got briefing wan?
*
Haha.. u not muslim lah.. kena tangkap basah nothing will happen to u one.. Trust me.. Hehe.. I know better.. XD .. But the girl will kena lah.. Thats the prob.. So make sure its those 1 time fling girls.. hehe..
Ya lah got briefing.. maha1 go from bukit jalil all the way to kepong that bugger told me postpone to tmr .. D1un1aseng... wasted more than 1 bar of petrol and RM5.50 on toll.. Tmr have to reach there at 12pm sharp.

QUOTE(dorinyeah @ Jul 27 2011, 11:39 AM)
Ghost no need to see from outside, can slip into ur car sit next to u.... whistling.gif
come Cose la
doggy doggy dooooggy
hehee... after tat how? ear twist until drop?
*
I put garlic in my car loh.. XD
eh bro cant join u in cose tmr.. Got lots of stuffs to do.. Damn.. Mb the next round i will try servicing in Intan Mayang.. XD..

QUOTE(adriankhoo153 @ Jul 27 2011, 02:56 PM)
Nope..  tongue.gif
Btw, here is the review of Intan Matang SC by other ppl.

http://kereta.info/best-service-centers-for-your-car/
*
Bro there got heavy repair or not? Or just for minor service only, no bodywork repair??

QUOTE(stormaker @ Jul 27 2011, 03:54 PM)
I like this rim ...

user posted image
user posted image
*
haha.. R3.. Here is one pic i took on tues after class..
Attached Image

QUOTE(vccy @ Jul 27 2011, 04:12 PM)
this is a light weight sport rims. Some more it is limited edition from R3. Won expect cheap lo.  whistling.gif
*
No lah.. This R3 is heavier than those lightweight 17" rims..

QUOTE(xandras @ Jul 27 2011, 05:41 PM)
LoL... Haiz.. My modding days are over.. Now time to get a real gentleman's car without mods & live with it.. laugh.gif
*
No wonder today heavy rain everywhere...

QUOTE(Dav6534 @ Jul 27 2011, 08:00 PM)
yo xand. today i saw one damn yeng bbs rim on a pe. i was like wtf when i saw it.
*
shocking.gif u really bery sure?? I love the rims..... 18" somemore.. If i had the money i would install it for sure.

QUOTE(miriel10 @ Jul 27 2011, 10:08 PM)
I didn't do the piping yet. Stock piping atm. Just changed the extractor, midbox and muffler. I tried asking the shop about installing bullets. It was not recommended since they claimed that my FC will totally increase. But I will consider your option.
*
Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.
jasonloh7906
post Jul 27 2011, 10:36 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ngeo88 @ Jul 27 2011, 10:24 PM)
optiseal expansive but worth it lah at least you save time and energy to polish your car optiseal is just spy on and wipre spread to car body thats it, it look in small bottle but you need very little amout to wipe through the whole car. S-drive of cause good wet grip and yes only 80 buck different per tyer but it also sacrify the comfortable check the yokohama page got comparison chart, so far there are no tyer that really compromise confortable and good grip at the same level.
*
how much it cost actually?? the benefit?? save time and??
i only see S-drive in yokohama website. no A-drive, no C-drive. rclxub.gif
student cannot afford mah. look like a little, RM80. but 4 new tyre is Rm320 more. lets say C-drive is Rm800 for 4 tyre. to get S-drive, i need Rm1120. hahaha~~i do keen on getting S-drive. i will see how is the cost 1st in tyre shop here. if still ok then i will take S-drive lor.
ckdenion
post Jul 27 2011, 10:40 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(ZenGTMM @ Jul 27 2011, 10:36 PM)
haha.. R3.. Here is one pic i took on tues after class..
Attached Image
No lah.. This R3 is heavier than those lightweight 17" rims..

shocking.gif  u really bery sure?? I love the rims..... 18" somemore.. If i had the money i would install it for sure.
*
the R3 rims look small... cry.gif
y no 17''?if got then no headache choosing rims lo... whistling.gif
ZenGTMM
post Jul 27 2011, 10:43 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(jasonloh7906 @ Jul 27 2011, 10:36 PM)
how much it cost actually?? the benefit?? save time and??
i only see S-drive in yokohama website. no A-drive, no C-drive.  rclxub.gif
student cannot afford mah. look like a little, RM80. but 4 new tyre is Rm320 more. lets say C-drive is Rm800 for 4 tyre. to get S-drive, i need Rm1120. hahaha~~i do keen on getting S-drive. i will see how is the cost 1st in tyre shop here. if still ok then i will take S-drive lor.
*
U want to see the benefits?? haha.. Let me show u my opti-sealed super shiny brand new car.. Done by KC..
Attached Image
jasonloh7906
post Jul 27 2011, 10:43 PM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ZenGTMM @ Jul 27 2011, 10:36 PM)
Haha.. u not muslim lah.. kena tangkap basah nothing will happen to u one.. Trust me.. Hehe.. I know better.. XD .. But the girl will kena lah.. Thats the prob.. So make sure its those 1 time fling girls.. hehe..
Ya lah got briefing.. maha1 go from bukit jalil all the way to kepong that bugger told me postpone to tmr .. D1un1aseng... wasted more than 1 bar of petrol and RM5.50 on toll.. Tmr have to reach there at 12pm sharp.
I put garlic in my car loh.. XD
eh bro cant join u in cose tmr.. Got lots of stuffs to do.. Damn.. Mb the next round i will try servicing in Intan Mayang.. XD..
Bro there got heavy repair or not? Or just for minor service only, no bodywork repair??
haha.. R3.. Here is one pic i took on tues after class..
Attached Image
No lah.. This R3 is heavier than those lightweight 17" rims..
No wonder today heavy rain everywhere...
shocking.gif  u really bery sure?? I love the rims..... 18" somemore.. If i had the money i would install it for sure.
Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.
*
ayamas??

QUOTE(ckdenion @ Jul 27 2011, 10:40 PM)
the R3 rims look small... cry.gif
y no 17''?if got then no headache choosing rims lo... whistling.gif
*
y wan so big XD

QUOTE(ckdenion @ Jul 27 2011, 10:34 PM)
please dun place d daylight led there...u already got 2 there...if got 4...err...i bet xan will say it will look lala...
2 is enuf already...
*
hahahaha~~daylight mah. not HID. y look lala leh.
i dun like this set of daylight compared to the L-shaped one leh. but L-shaped cannot fit there. so i wanna put in the middle lor. then maybe remove the old one so that it dont look lala XD


Added on July 27, 2011, 10:44 pm
QUOTE(ZenGTMM @ Jul 27 2011, 10:43 PM)
U want to see the benefits?? haha.. Let me show u my opti-sealed super shiny brand new car.. Done by KC..
Attached Image
*
hahahaha~~super nice. can last how long?? tell me more bout it??


Added on July 27, 2011, 10:46 pm@zeng
your muffler dont look big XD

This post has been edited by jasonloh7906: Jul 27 2011, 10:46 PM
ckdenion
post Jul 27 2011, 10:47 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(ZenGTMM @ Jul 27 2011, 10:43 PM)
U want to see the benefits?? haha.. Let me show u my opti-sealed super shiny brand new car.. Done by KC..
Attached Image
*
ur car opti-sealed?how much u do?so aftr opti-sealed,it wont get dirty tat easily isit?

QUOTE(jasonloh7906 @ Jul 27 2011, 10:43 PM)
ayamas??
y wan so big XD
hahahaha~~daylight mah. not HID. y look lala leh.
i dun like this set of daylight compared to the L-shaped one leh. but L-shaped cannot fit there. so i wanna put in the middle lor. then maybe remove the old one so that it dont look lala XD
*
ayamas = ayam ciplak brand
i want at least 17''...y huh?erm...no reason...since wan to change rims...change to bigger ones ma...
i got an idea...remove ur current daylight LED...n d L shaped one..u asked them to do some modifications on d available slot there to fit the L-shaped LED
ZenGTMM
post Jul 27 2011, 10:50 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(ckdenion @ Jul 27 2011, 10:40 PM)
the R3 rims look small... cry.gif
y no 17''?if got then no headache choosing rims lo... whistling.gif
*
Ya lah.. the c2pid R3 never create 17", if not surely i take this rims ady..

QUOTE(jasonloh7906 @ Jul 27 2011, 10:43 PM)
ayamas??
y wan so big XD
hahahaha~~daylight mah. not HID. y look lala leh.
i dun like this set of daylight compared to the L-shaped one leh. but L-shaped cannot fit there. so i wanna put in the middle lor. then maybe remove the old one so that it dont look lala XD


Added on July 27, 2011, 10:44 pm
hahahaha~~super nice. can last how long?? tell me more bout it??


Added on July 27, 2011, 10:46 pm@zeng
your muffler dont look big XD
*
Cap ayam loh.. Ayamas brand mah.. haha..
The effect after u apply Opti-seal is like ur car become glass like.. I thought my car color will become blacker, but it become really super glossy.. 1 bottle is around RM150.. Each bottle can apply 25 cars.. U only need to touch up every 3-4mths once..
This muffler hvnt change yet.. After change ady looks very big.. Tmr morning time i go take a few pics show u.. XD


Added on July 27, 2011, 10:53 pm
QUOTE(ckdenion @ Jul 27 2011, 10:47 PM)
ur car opti-sealed?how much u do?so aftr opti-sealed,it wont get dirty tat easily isit?
ayamas = ayam ciplak brand
i want at least 17''...y huh?erm...no reason...since wan to change rims...change to bigger ones ma...
i got an idea...remove ur current daylight LED...n d L shaped one..u asked them to do some modifications on d available slot there to fit the L-shaped LED
*
For me he do it for free.. XD.. But only do the roof and boot.. The rest he told me to clay the car first b4 opti-seal it.. Cos when u opti seal it locks in the road dirt and paint imperfections all into it.. So u need to make sure clay kaw kaw clean and smooth then only opti-seal.. If u ask him do it i think around RM200..

This post has been edited by ZenGTMM: Jul 27 2011, 10:53 PM
jackyap84
post Jul 27 2011, 10:55 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(jasontantenghuat @ Jul 27 2011, 10:04 PM)
Jackyap must have had a very fun night last night brows.gif
*
haha... ya lor.. still "kicking"...
ngeo88
post Jul 27 2011, 10:56 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(jasonloh7906 @ Jul 27 2011, 10:43 PM)
ayamas??
y wan so big XD
hahahaha~~daylight mah. not HID. y look lala leh.
i dun like this set of daylight compared to the L-shaped one leh. but L-shaped cannot fit there. so i wanna put in the middle lor. then maybe remove the old one so that it dont look lala XD


Added on July 27, 2011, 10:44 pm
hahahaha~~super nice. can last how long?? tell me more bout it??


Added on July 27, 2011, 10:46 pm@zeng
your muffler dont look big XD
*
check this more for KC http://forum.lowyat.net/topic/75541/+2020 , he selling the optimum product and he is not doing polish for normal car only for those super car but he more willing to teach us DIY with optimum product.
jackyap84
post Jul 27 2011, 10:57 PM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(ZenGTMM @ Jul 27 2011, 10:43 PM)
U want to see the benefits?? haha.. Let me show u my opti-sealed super shiny brand new car.. Done by KC..
Attached Image
*
cantik nya...
ZenGTMM
post Jul 27 2011, 10:58 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


See my tint.. When I first tinted the side and back.. It was super black.. Cant see through.. Even the front windscreen also hvnt tinted yet.
samwongjyhhorng
post Jul 27 2011, 10:59 PM

New Member
*
Junior Member
10 posts

Joined: Jun 2010


QUOTE(ZenGTMM @ Jul 27 2011, 10:36 PM)
Haha.. u not muslim lah.. kena tangkap basah nothing will happen to u one.. Trust me.. Hehe.. I know better.. XD .. But the girl will kena lah.. Thats the prob.. So make sure its those 1 time fling girls.. hehe..
Ya lah got briefing.. maha1 go from bukit jalil all the way to kepong that bugger told me postpone to tmr .. D1un1aseng... wasted more than 1 bar of petrol and RM5.50 on toll.. Tmr have to reach there at 12pm sharp.
I put garlic in my car loh.. XD
eh bro cant join u in cose tmr.. Got lots of stuffs to do.. Damn.. Mb the next round i will try servicing in Intan Mayang.. XD..
Bro there got heavy repair or not? Or just for minor service only, no bodywork repair??
haha.. R3.. Here is one pic i took on tues after class..
Attached Image
No lah.. This R3 is heavier than those lightweight 17" rims..
No wonder today heavy rain everywhere...
shocking.gif  u really bery sure?? I love the rims..... 18" somemore.. If i had the money i would install it for sure.
Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.
*
tapau my PE oso cry.gif
ngeo88
post Jul 27 2011, 11:01 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(ZenGTMM @ Jul 27 2011, 10:50 PM)
Ya lah.. the c2pid R3 never create 17", if not surely i take this rims ady..
Cap ayam loh.. Ayamas brand mah.. haha..
The effect after u apply Opti-seal is like ur car become glass like.. I thought my car color will become blacker, but it become really super glossy.. 1 bottle is around RM150.. Each bottle can apply 25 cars.. U only need to touch up every 3-4mths once..
This muffler hvnt change yet.. After change ady looks very big.. Tmr morning time i go take a few pics show u.. XD


Added on July 27, 2011, 10:53 pm
For me he do it for free.. XD.. But only do the roof and boot.. The rest he told me to clay the car first b4 opti-seal it.. Cos when u opti seal it locks in the road dirt and paint imperfections all into it.. So u need to make sure clay kaw kaw clean and smooth then only opti-seal.. If u ask him do it i think around RM200..
*
i don't think so cheap lah .....maybe he only optiseal it but not including the ONR wash and clay before Optiseal, as i know he only do for those super car complete detailing in and out and charge them kaw kaw. But some time he also suffer arm pain and lately he got strain on back some more shocking.gif
Dav6534
post Jul 27 2011, 11:01 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ZenGTMM @ Jul 27 2011, 10:58 PM)
See my tint.. When I first tinted the side and back.. It was super black.. Cant see through.. Even the front windscreen also hvnt tinted yet.
*
sure lo. the rim inside is black then the lip is red. f**king awesome kaw kaw.
ZenGTMM
post Jul 27 2011, 11:02 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(samwongjyhhorng @ Jul 27 2011, 10:59 PM)
tapau my PE oso cry.gif
*
Urs hvnt full throttle yet.. One of the days we need to rematch.. Lets see who gets to become crown king.. XD..

Ok folks.. gotta sleep early tonight.. Tmr early morning got bootcamp.. cry.gif
ngeo88
post Jul 27 2011, 11:03 PM

New Member
*
Junior Member
48 posts

Joined: Nov 2009
QUOTE(ZenGTMM @ Jul 27 2011, 11:02 PM)
Urs hvnt full throttle yet.. One of the days we need to rematch.. Lets see who gets to become crown king.. XD..

Ok folks.. gotta sleep early tonight.. Tmr early morning got bootcamp..  cry.gif
*
wat is bootcamp ? blink.gif
ZenGTMM
post Jul 27 2011, 11:04 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(ngeo88 @ Jul 27 2011, 11:03 PM)
wat is bootcamp ? blink.gif
*
Military training.. u can see it here..
www.hooyah.com.my

samwongjyhhorng
post Jul 27 2011, 11:05 PM

New Member
*
Junior Member
10 posts

Joined: Jun 2010


QUOTE(ZenGTMM @ Jul 27 2011, 11:02 PM)
Urs hvnt full throttle yet.. One of the days we need to rematch.. Lets see who gets to become crown king.. XD..

Ok folks.. gotta sleep early tonight.. Tmr early morning got bootcamp..  cry.gif
*
last time went genting,i kena smoke by xandras lo cry.gif
ZenGTMM
post Jul 27 2011, 11:08 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(ngeo88 @ Jul 27 2011, 11:01 PM)
i don't think so cheap lah .....maybe he only optiseal it but not including the ONR wash and clay before Optiseal, as i know he only do for those super car complete detailing in and out and charge them kaw kaw. But some time he also suffer arm pain and lately he got strain on back some more  shocking.gif
*
Yeah, he expect u to clay and ONR the whole car first.. If u want him to do it all for u then u slowly wait loh.. He is fully booked for mths ahead..

QUOTE(Dav6534 @ Jul 27 2011, 11:01 PM)
sure lo. the rim inside is  black then the lip is red. f**king awesome kaw kaw.
*
OMG.. damn nice... Poison.. shocking.gif

QUOTE(samwongjyhhorng @ Jul 27 2011, 11:05 PM)
last time went genting,i kena smoke by xandras lo cry.gif
*
Hvnt kena smoked by my Ironhide yet..
TSxandras
post Jul 27 2011, 11:14 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(miriel10 @ Jul 27 2011, 10:08 PM)
I didn't do the piping yet. Stock piping atm. Just changed the extractor, midbox and muffler. I tried asking the shop about installing bullets. It was not recommended since they claimed that my FC will totally increase. But I will consider your option.
*
Dont nid to bother with ur piping lah.. They'll claim this n that to make u spend more on ur car nia.. The best is u get the advice from ppl who have experienced it themselves..

QUOTE(jasonloh7906 @ Jul 27 2011, 10:22 PM)
hahahaha~~i get it edi. means if i do want to change the rim i should get a bigger rim say 16". then wont have the floaty effect. hahahaha~~aiyor. u poison me for performance tyre. but i am more to comfort tyre. the best is balance. hahahaha~~bcoz it best to be comfortable when driving mah. passenger also feel better. also, i seldom speed lah. besides performance tyre, any introduction?? or maybe u are only into performance so u only know those tyre. XD

btw, if i am always encountering pothole and going uneven road, is it not advisable to get lighter rims??..
yup. thats the difference. i would prefer the new PE. got more space to mod. the space is so limited for the old persona. is that kua cheong ah~~my windscreen hit by something got one crack tat is quite obvious, then when i wash car can see smaller bits all over the windscreen like paint that peels off.

i actually tot of placing the L-shaped daylight at the red spot i highlighted. XD

user posted image
*
I poison poison nia.. Many here kena poison digging their own grave on the way to hell now.. brows.gif U wan comfort tyre ka.. Go for Continental CC5 la then.. Comfortable & very silent..

QUOTE(ngeo88 @ Jul 27 2011, 10:24 PM)
optiseal expansive but worth it lah at least you save time and energy to polish your car optiseal is just spy on and wipre spread to car body thats it, it look in small bottle but you need very little amout to wipe through the whole car. S-drive of cause good wet grip and yes only 80 buck different per tyer but it also sacrify the comfortable check the yokohama page got comparison chart, so far there are no tyer that really compromise confortable and good grip at the same level.
*
Actually got lah.. Those really high end large rims ones.. For our PE not much choice lo..

QUOTE(ckdenion @ Jul 27 2011, 10:34 PM)
please dun place d daylight led there...u already got 2 there...if got 4...err...i bet xan will say it will look lala...
2 is enuf already...
*
Lalalalalalalalala~ whistling.gif

QUOTE(jasonloh7906 @ Jul 27 2011, 10:36 PM)
how much it cost actually?? the benefit?? save time and??
i only see S-drive in yokohama website. no A-drive, no C-drive.  rclxub.gif
student cannot afford mah. look like a little, RM80. but 4 new tyre is Rm320 more. lets say C-drive is Rm800 for 4 tyre. to get S-drive, i need Rm1120. hahaha~~i do keen on getting S-drive. i will see how is the cost 1st in tyre shop here. if still ok then i will take S-drive lor.
*
whistling.gif Get one that's within ur budget.. If u're not gonna change ur rims yet, just save it till u get ur 16/17 inch lah.. then only change to S-drive..

QUOTE(jasonloh7906 @ Jul 27 2011, 10:43 PM)
ayamas??
y wan so big XD
hahahaha~~daylight mah. not HID. y look lala leh.
i dun like this set of daylight compared to the L-shaped one leh. but L-shaped cannot fit there. so i wanna put in the middle lor. then maybe remove the old one so that it dont look lala XD


Added on July 27, 2011, 10:44 pm
hahahaha~~super nice. can last how long?? tell me more bout it??


Added on July 27, 2011, 10:46 pm@zeng
your muffler dont look big XD
*
His muffler untouched yet la in the pic.. brows.gif Look at genting TT pics, then tell me if u think the muffler on my car is big.. brows.gif

QUOTE(samwongjyhhorng @ Jul 27 2011, 11:05 PM)
last time went genting,i kena smoke by xandras lo cry.gif
*
Now no chance for u to kena tapau by me again lo..whistling.gif
Dav6534
post Jul 27 2011, 11:15 PM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ZenGTMM @ Jul 27 2011, 11:08 PM)
Yeah, he expect u to clay and ONR the whole car first.. If u want him to do it all for u then u slowly wait loh.. He is fully booked for mths ahead..
OMG.. damn nice... Poison.. shocking.gif
Hvnt kena smoked by my Ironhide yet..
*
not only you. me also kena poison...it make the enkei es6 rim that i wanted look like nothing. cry.gif
TSxandras
post Jul 27 2011, 11:15 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ngeo88 @ Jul 27 2011, 11:03 PM)
wat is bootcamp ? blink.gif
*
He going to booty-camp lah..brows.gif


Added on July 27, 2011, 11:17 pm@Zeng, the waja using cap ayam R3 rims lah.. The centre cover not that shape wan..

This post has been edited by xandras: Jul 27 2011, 11:17 PM
ckdenion
post Jul 27 2011, 11:29 PM

Financial Practitioner
*******
Senior Member
2,866 posts

Joined: Sep 2008
From: Wangsa Maju, KL



QUOTE(xandras @ Jul 27 2011, 11:15 PM)
@Zeng, the waja using cap ayam R3 rims lah.. The centre cover not that shape wan..
*
R3 rims look alike? tongue.gif
azeotrope
post Jul 27 2011, 11:29 PM

New Member
*
Junior Member
25 posts

Joined: May 2009


QUOTE(ZenGTMM @ Jul 27 2011, 10:36 PM)

Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.
*
i wanna confirm, stock persona piping already 1.8"?
TSxandras
post Jul 27 2011, 11:35 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ckdenion @ Jul 27 2011, 11:29 PM)
R3 rims look alike? tongue.gif
*
Yeap..

QUOTE(azeotrope @ Jul 27 2011, 11:29 PM)
i wanna confirm, stock persona piping already 1.8"?
*
Yea.. I also asked the exhaust shop fella before.. 1.8"..
azeotrope
post Jul 27 2011, 11:39 PM

New Member
*
Junior Member
25 posts

Joined: May 2009


QUOTE(xandras @ Jul 27 2011, 11:35 PM)
Yea.. I also asked the exhaust shop fella before.. 1.8"..
*
nice... no need to change piping... just header,mid box n muffler... thumbup.gif
TSxandras
post Jul 27 2011, 11:42 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(azeotrope @ Jul 27 2011, 11:39 PM)
nice... no need to change piping... just header,mid box n muffler...  thumbup.gif
*
1.8 optimum d la.. wan so big piping for wat.. rclxub.gif
miriel10
post Jul 27 2011, 11:49 PM

Casual
***
Junior Member
376 posts

Joined: Dec 2008


QUOTE(ZenGTMM @ Jul 27 2011, 10:36 PM)
Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.
*
Thanks. I keep that in mind.

That R3 lookalike rims looks good xD
TSxandras
post Jul 27 2011, 11:50 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(miriel10 @ Jul 27 2011, 11:49 PM)
Thanks. I keep that in mind.

That R3 lookalike rims looks good xD
*
blink.gif The one on the waja?? that's damn dirty wei.. rclxub.gif
ZenGTMM
post Jul 27 2011, 11:51 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(Dav6534 @ Jul 27 2011, 11:15 PM)
not only you. me also kena poison...it make the enkei es6 rim that i wanted look like nothing.  cry.gif
*
Ya lah.. The rims i like is TE-37 SL(superlight) and Enkei SC-09.
Attached Image
Attached Image
Attached Image
QUOTE(xandras @ Jul 27 2011, 11:15 PM)
He going to booty-camp lah..brows.gif


Added on July 27, 2011, 11:17 pm@Zeng, the waja using cap ayam R3 rims lah.. The centre cover not that shape wan..
*
Owh didnt know got cap ayam lah.. But the hub cap can change one mah..

This post has been edited by ZenGTMM: Jul 27 2011, 11:55 PM
TSxandras
post Jul 27 2011, 11:53 PM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 11:51 PM)
Ya lah.. The rims i like is TE-37 SL(superlight) and Enkei SC-09.
Attached Image
Attached Image

Owh didnt know got cap ayam lah.. But the hub cap can change one mah..
*
laugh.gif I try before.. R3's hub the clip is different.. smile.gif
ZenGTMM
post Jul 27 2011, 11:58 PM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


http://www.happyplace.com/4042/most-absurd...uct-disclaimers

Enjoy... XD
miriel10
post Jul 28 2011, 12:00 AM

Casual
***
Junior Member
376 posts

Joined: Dec 2008


QUOTE(xandras @ Jul 27 2011, 11:50 PM)
blink.gif The one on the waja?? that's damn dirty wei.. rclxub.gif
*
This one lo blush.gif

» Click to show Spoiler - click again to hide... «

TSxandras
post Jul 28 2011, 12:00 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(ZenGTMM @ Jul 27 2011, 11:58 PM)
U bukan mau tidur punya meh? blink.gif
Dav6534
post Jul 28 2011, 12:01 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ZenGTMM @ Jul 27 2011, 11:51 PM)
Ya lah.. The rims i like is TE-37 SL(superlight) and Enkei SC-09.
Attached Image
Attached Image
Attached Image

Owh didnt know got cap ayam lah.. But the hub cap can change one mah..
*
the first and second pic damn poison...
ZenGTMM
post Jul 28 2011, 12:01 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(xandras @ Jul 28 2011, 12:00 AM)
U bukan mau tidur punya meh? blink.gif
*
B4 tidor need to laugh a bit.. hehe.. Chatting with my CKT atm.. Will sleep after that..


Added on July 28, 2011, 12:03 am
QUOTE(Dav6534 @ Jul 28 2011, 12:01 AM)
the first and second pic damn poison...
*
3rd pic the real rims color is actually even better.. Gunmetal inside finishing, with chrome inner lip stripe and metal finish outer spoke.

This post has been edited by ZenGTMM: Jul 28 2011, 12:03 AM
Dav6534
post Jul 28 2011, 12:05 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ZenGTMM @ Jul 28 2011, 12:01 AM)
B4 tidor need to laugh a bit.. hehe.. Chatting with my CKT atm.. Will sleep after that..


Added on July 28, 2011, 12:03 am
3rd pic the real rims color is actually even better.. Gunmetal inside finishing, with chrome inner lip stripe and metal finish outer spoke.
*
but i dont like the red part in the first pic. so 2nd pic is the best overall. zeng, thanks for my early Christmas present. xD
ZenGTMM
post Jul 28 2011, 12:05 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


Enkei Sesto.
Attached Image


Added on July 28, 2011, 12:06 am
QUOTE(Dav6534 @ Jul 28 2011, 12:05 AM)
but i dont like the red part in the first pic. so 2nd pic is the best overall. zeng, thanks for my early Christmas present. xD
*
hehe.. The red part can spray it away.. XD..
2nd pic the rims dunno where to get leh.. Never seen in Msia b4..

This post has been edited by ZenGTMM: Jul 28 2011, 12:06 AM
dzie25
post Jul 28 2011, 12:08 AM

New Member
*
Junior Member
18 posts

Joined: Aug 2010
Wah.. damm poisioning..... As c-drive rim more cheaper....??
Dav6534
post Jul 28 2011, 12:08 AM

New Member
*
Newbie
3 posts

Joined: Jun 2011
QUOTE(ZenGTMM @ Jul 28 2011, 12:05 AM)
Enkei Sesto.
Attached Image


Added on July 28, 2011, 12:06 am
hehe.. The red part can spray it away.. XD..
2nd pic the rims dunno where to get leh.. Never seen in Msia b4..
*
spray liao then not nice already. haha. you import in lor. xD
jackyap84
post Jul 28 2011, 12:14 AM

Casual
***
Junior Member
334 posts

Joined: Jan 2005


QUOTE(ZenGTMM @ Jul 27 2011, 11:02 PM)
Urs hvnt full throttle yet.. One of the days we need to rematch.. Lets see who gets to become crown king.. XD..

Ok folks.. gotta sleep early tonight.. Tmr early morning got bootcamp..  cry.gif
*
my ori ride can play with urs? tongue.gif
TSxandras
post Jul 28 2011, 12:19 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(dzie25 @ Jul 28 2011, 12:08 AM)
Wah.. damm poisioning.....  As c-drive rim more cheaper....??
*
laugh.gif U can choose tyre as cheap as u want if u dun care about it & only wan ur car to look good.. cheapest tyre around RM 140 for 16 inch, RM 170 for 17 inch..
nzh0920
post Jul 28 2011, 12:21 AM

Getting Started
**
Junior Member
83 posts

Joined: May 2011


guys, my fren interesting in purchase persona, do you all got any link show what spec different between all line? and what the latest promotion for now? like discount how many k, got free part & labour maintenance etc? how many years warranty and what the loan interest rate running right now?

thank you.
TSxandras
post Jul 28 2011, 12:33 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(nzh0920 @ Jul 28 2011, 12:21 AM)
guys, my fren interesting in purchase persona, do you all got any link show what spec different between all line? and what the latest promotion for now? like discount how many k, got free part & labour maintenance etc? how many years warranty and what the loan interest rate running right now?

thank you.
*
Aiyo.. No need the link to show lah.. We can tell u more things than the link/brochure ever could.. brows.gif

B-Line:

1. No coil mat.
2. No trunk lid cover.
3. No steering control function for radio/HeadUnit.
4. No ABS, EBD, rear disc brakes.
5. Using Saga 1.3 brake pump.
6. Shorter rear bench, seats cannot be folded down.
7. No fog lamp.
8. No spoiler/bodykit.
9. No sport rims, only steel rims a.K.a pasu bunga rims.
10. No airbags.
11. No GPS.
12. Available in Auto/Manual.
13. No remote trunk release.

M-Line:

1. Coil mat.
2. Trunk lid cover.
3. Steering control function.
4. No ABS, EBD, rear disc brakes.
5. Saga 1.3 brake pump.
6. Slightly longer rear bench, foldable seats.
7. Fog lamp.
8. Spoiler & bodykit.
9. Sport rims/alloy rims.
10. Driver only airbag.
11. Lokatoo GPS.
12. Available in Auto/Manual.
13. No remote trunk release.

H-line:

1. Coil mat.
2. Trunk lid cover.
3. Steering control function.
4. ABS, EBD, Rear disc brakes.
5. Gen2 1.6 brake pump.
6. Leather seats with foldable rear seats.
7. Fog lamp.
8. Spoiler, bodykit.
9. Sport/alloy rims.
10. Dual airbag.
11. Cruise control.
12. Lokatoo GPS.
13. SafeTint.
14. Only available with Auto.
15. Remote trunk release.

For B/M/H-line, 2 years/50k KMs warranty. If u purchase the EWP (Extended Warranty Plan), 5 years or 100k KMs.

Loan interest depends on ur SA/your negotiation skills with the bank. Can get as low as 2.xx%, but also as high as 4%.
nzh0920
post Jul 28 2011, 12:36 AM

Getting Started
**
Junior Member
83 posts

Joined: May 2011


ok tq xandras,
erm... for the maintenance part? you didnt mention?
got free labour and parts service like my inspira?
RuL3s
post Jul 28 2011, 12:36 AM

New Member
*
Junior Member
39 posts

Joined: Dec 2009
Cool~Will it cost a lot to change the 1.3 brake pump to 1.6 brake pump?
TSxandras
post Jul 28 2011, 12:43 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(nzh0920 @ Jul 28 2011, 12:36 AM)
ok tq xandras,
erm... for the maintenance part? you didnt mention?
got free labour and parts service like my inspira?
*
Free labour yes, for 1k, 5k, 10k KMs. Depends on ur SA, some places might offer ur the 20k KM service voucher too. These vouchers excludes u from paying any labour, but u still need to pay for the engine oil & oil filter price. No free parts, Proton did the free parts & service for 2 years for Inspira because it's a new model, and they were expecting problems with it. If I'm not mistaken, one general rule in order to not void the free parts & labour for service is that u cannot modify ur Inspira in any way at all.

QUOTE(RuL3s @ Jul 28 2011, 12:36 AM)
Cool~Will it cost a lot to change the 1.3 brake pump to 1.6 brake pump?
*
There's no point in upgrading the 1.3 brake pump to 1.6 without changing the rear disc brakes & adding EBD & ABS, because a larger brake pump will only cause ur brakes to lock easier.
RuL3s
post Jul 28 2011, 12:49 AM

New Member
*
Junior Member
39 posts

Joined: Dec 2009
Isn't that going to be a problem in case of emergency brake with 1.3 brake pump?
TSxandras
post Jul 28 2011, 12:57 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(RuL3s @ Jul 28 2011, 12:49 AM)
Isn't that going to be a problem in case of emergency brake with 1.3 brake pump?
*
Actually the bigger problem with the brake in B/M line is the lack of ABS & EBD, not the brake pump. Once U've replaced the brake pads, it works perfectly fine.

Why ABS, u may ask. PE is a fairly heavy car, & I think it's the only car in the market right now
weighing in at 1200 kgs without ABS. When u brake hard in the event of an emergency, the mass of the car causes a big inertia, thus the tyres will lock and the car slides forward at full braking capacity. This increases stopping distance. Professional drivers will know when to pump the brakes manually to avoid tyre locking, but normal drivers would not be able to react as quickly.
KKW
post Jul 28 2011, 12:59 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(jackyap84 @ Jul 27 2011, 02:17 PM)
wat u claimed?
*
Crank sensor rclxub.gif

QUOTE(vccy @ Jul 27 2011, 03:37 PM)
My car sometime quite hard to start after the 1st start. Last week got a member complain the same thing right. I am servicing soon next months. what should i told them to check? The crank starter?
*
You better go now and check your crank sensor..
I just replace mine smile.gif
My engine to hard to start.. first they blame my battery, then the problem get worst..
Went back serdang sc and plug in computer check on ECU said got fault code..
They straight order the parts thumbup.gif
For your information, crank sensor will cost RM 3xx doh.gif
This is a common problem on persona rclxub.gif
Today damage RM 297 (labour charge+oil filter+fuel filter+castrol edge) sweat.gif
btw, got one PE tapau me while coming back from puchong.. cry.gif
I was travelling 150km/h, that PE tapau me really fast.. shocking.gif
TSxandras
post Jul 28 2011, 01:03 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 28 2011, 12:59 AM)
Crank sensor  rclxub.gif
You better go now and check your crank sensor..
I just replace mine  smile.gif
My engine to hard to start.. first they blame my battery, then the problem get worst..
Went back serdang sc and plug in computer check on ECU said got fault code..
They straight order the parts thumbup.gif
For your information, crank sensor will cost RM 3xx  doh.gif
This is a common problem on persona  rclxub.gif
Today damage RM 297 (labour charge+oil filter+fuel filter+castrol edge)  sweat.gif
btw, got one PE tapau me while coming back from puchong.. cry.gif
I was travelling 150km/h, that PE tapau me really fast..  shocking.gif
*
Oh, that was my twin brother Xander.. brows.gif
RuL3s
post Jul 28 2011, 01:07 AM

New Member
*
Junior Member
39 posts

Joined: Dec 2009
QUOTE(xandras @ Jul 28 2011, 12:57 AM)
Actually the bigger problem with the brake in B/M line is the lack of ABS & EBD, not the brake pump. Once U've replaced the brake pads, it works perfectly fine.

Why ABS, u may ask. PE is a fairly heavy car, & I think it's the only car in the market right now
weighing in at 1200 kgs without ABS. When u brake hard in the event of an emergency, the mass of the car causes a big inertia, thus the tyres will lock and the car slides forward at full braking capacity. This increases stopping distance. Professional drivers will know when to pump the brakes manually to avoid tyre locking, but normal drivers would not be able to react as quickly.
*
brake pad as in those racing pad? Any recommended brand for the pad?
KKW
post Jul 28 2011, 01:07 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 28 2011, 01:03 AM)
Oh, that was my twin brother Xander.. brows.gif
*
Lol.. same colour as yours as well doh.gif
dorinyeah
post Jul 28 2011, 01:11 AM

Getting Started
**
Junior Member
57 posts

Joined: Dec 2008


QUOTE(ZenGTMM @ Jul 27 2011, 10:36 PM)
Haha.. u not muslim lah.. kena tangkap basah nothing will happen to u one.. Trust me.. Hehe.. I know better.. XD .. But the girl will kena lah.. Thats the prob.. So make sure its those 1 time fling girls.. hehe..
Ya lah got briefing.. maha1 go from bukit jalil all the way to kepong that bugger told me postpone to tmr .. D1un1aseng... wasted more than 1 bar of petrol and RM5.50 on toll.. Tmr have to reach there at 12pm sharp.
I put garlic in my car loh.. XD
eh bro cant join u in cose tmr.. Got lots of stuffs to do.. Damn.. Mb the next round i will try servicing in Intan Mayang.. XD..
Bro there got heavy repair or not? Or just for minor service only, no bodywork repair??
haha.. R3.. Here is one pic i took on tues after class..
Attached Image
No lah.. This R3 is heavier than those lightweight 17" rims..
No wonder today heavy rain everywhere...
shocking.gif  u really bery sure?? I love the rims..... 18" somemore.. If i had the money i would install it for sure.
Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.
*
nvm....next time still got chance geh...

QUOTE(ZenGTMM @ Jul 27 2011, 10:43 PM)
U want to see the benefits?? haha.. Let me show u my opti-sealed super shiny brand new car.. Done by KC..
Attached Image
*
look nice!!


TSxandras
post Jul 28 2011, 01:13 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(RuL3s @ Jul 28 2011, 01:07 AM)
brake pad as in those racing pad? Any recommended brand for the pad?
*
Not really racing pads. Just high performance brake pads will do. Some will recommend Bendix MKT, but I stand & swear my life by Rapid Stop RS 550'C brake pads. Doesn't need warming up for full braking performance, bites like a german shepherd. wink.gif

QUOTE(KKW @ Jul 28 2011, 01:07 AM)
Lol.. same colour as yours as well  doh.gif
*
brows.gif Told u it's my twin brother.. Or perhaps it's just the R3 ghost running around blink.gif
KKW
post Jul 28 2011, 01:20 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 28 2011, 01:13 AM)
Not really racing pads. Just high performance brake pads will do. Some will recommend Bendix MKT, but I stand & swear my life by Rapid Stop RS 550'C brake pads. Doesn't need warming up for full braking performance, bites like a german shepherd. wink.gif
brows.gif Told u it's my twin brother.. Or perhaps it's just the R3 ghost running around blink.gif
*
Hahahah.. but rim is stock one smile.gif
TSxandras
post Jul 28 2011, 01:23 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 28 2011, 01:20 AM)
Hahahah.. but rim is stock one  smile.gif
*
Pasu bunga? My rim also pasu bunga leh brows.gif
zapdos9
post Jul 28 2011, 01:24 AM

chittychitty bangbang
****
Senior Member
523 posts

Joined: Aug 2005
From: Another Dimensioin


QUOTE(xandras @ Jul 27 2011, 11:08 AM)
zapdos wanna come? brows.gif
*
If on then jalan already brows.gif

Some of the enkei rim looks appetizing. Wondered if rawang there got lot of these models.
TSxandras
post Jul 28 2011, 01:25 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(zapdos9 @ Jul 28 2011, 01:24 AM)
If on then jalan already brows.gif

Some of the enkei rim looks appetizing. Wondered if rawang there got lot of these models.
*
Got. But mostly taiwanese la. sweat.gif
KKW
post Jul 28 2011, 01:25 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 28 2011, 01:23 AM)
Pasu bunga? My rim also pasu bunga leh brows.gif
*
Nope.. M-line or H-line punya rim biggrin.gif
saddient
post Jul 28 2011, 01:26 AM

yes or no
****
Senior Member
686 posts

Joined: Jun 2007
From: dine in the hell


yawwwwwwwwnnnnn yawn.gif yawn.gif yawn.gif
TSxandras
post Jul 28 2011, 01:27 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 28 2011, 01:25 AM)
Nope.. M-line or H-line punya rim  biggrin.gif
*
laugh.gif Time to upgrade ur ride.. brows.gif
KKW
post Jul 28 2011, 01:28 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 28 2011, 01:27 AM)
laugh.gif Time to upgrade ur ride.. brows.gif
*
Hilux rclxm9.gif
zapdos9
post Jul 28 2011, 01:31 AM

chittychitty bangbang
****
Senior Member
523 posts

Joined: Aug 2005
From: Another Dimensioin


QUOTE(xandras @ Jul 28 2011, 01:25 AM)
Got. But mostly taiwanese la. sweat.gif
*
What differ's anyway? maybe differ in material made from? Looks nice, lighter than stock and can cuci mata can consider already biggrin.gif
TSxandras
post Jul 28 2011, 01:33 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(KKW @ Jul 28 2011, 01:28 AM)
Hilux  rclxm9.gif
*
Buy the 3.0 wan.. drool.gif


Added on July 28, 2011, 1:34 am
QUOTE(zapdos9 @ Jul 28 2011, 01:31 AM)
What differ's anyway? maybe differ in material made from? Looks nice, lighter than stock and can cuci mata can consider already biggrin.gif
*
Depends on the rim lo.. Some are forged 1 piece rim, some are 2 piece rim.. Forged ones of course tougher lo..

This post has been edited by xandras: Jul 28 2011, 01:34 AM
sendi
post Jul 28 2011, 01:35 AM

Getting Started
**
Junior Member
66 posts

Joined: Aug 2009
hi guys tomorrow im goin menglembu to service my persona
just wanna noe if i my absorbers are giving me problem is it under warranty?
or to make it more clear, what is not covered under the warranty
TSxandras
post Jul 28 2011, 01:37 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(sendi @ Jul 28 2011, 01:35 AM)
hi guys tomorrow im goin menglembu to service my persona
just wanna noe if i my absorbers are giving me problem is it under warranty?
or to make it more clear, what is not covered under the warranty
*
How old is ur car? Is it under warranty? And have u done any mods to the suspension system/rims?
sendi
post Jul 28 2011, 01:38 AM

Getting Started
**
Junior Member
66 posts

Joined: Aug 2009
nope no mods nothing has been done to it
now only goin for 5k service biggrin.gif...although ive exceeded 420 km more..
got it during this year's CNY

This post has been edited by sendi: Jul 28 2011, 01:38 AM
TSxandras
post Jul 28 2011, 01:40 AM

Getting Started
**
Junior Member
52 posts

Joined: Dec 2010



QUOTE(sendi @ Jul 28 2011, 01:38 AM)
nope no mods nothing has been done to it
now only goin for 5k service biggrin.gif...although ive exceeded 420 km more..
got it during this year's CNY
*
blink.gif Only 5k? doh.gif

then surely under warranty lah.. Just send it there..
KKW
post Jul 28 2011, 01:47 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(xandras @ Jul 28 2011, 01:33 AM)
Buy the 3.0 wan.. drool.gif


Added on July 28, 2011, 1:34 am
Depends on the rim lo.. Some are forged 1 piece rim, some are 2 piece rim.. Forged ones of course tougher lo..
*
Of course.. brows.gif
jasonloh7906
post Jul 28 2011, 02:11 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(ZenGTMM @ Jul 27 2011, 11:51 PM)
Ya lah.. The rims i like is TE-37 SL(superlight) and Enkei SC-09.
Attached Image
Attached Image
Attached Image

Owh didnt know got cap ayam lah.. But the hub cap can change one mah..
*
wow..i like the 1st and the 3rd. 2nd is not my taste XD hahaha~~

QUOTE(xandras @ Jul 27 2011, 11:14 PM)
Dont nid to bother with ur piping lah.. They'll claim this n that to make u spend more on ur car nia.. The best is u get the advice from ppl who have experienced it themselves..
I poison poison nia.. Many here kena poison digging their own grave on the way to hell now..  U wan comfort tyre ka.. Go for Continental CC5 la then.. Comfortable & very silent..
Actually got lah.. Those really high end large rims ones.. For our PE not much choice lo..
Lalalalalalalalala~
Get one that's within ur budget.. If u're not gonna change ur rims yet, just save it till u get ur 16/17 inch lah.. then only change to S-drive..
His muffler untouched yet la in the pic.. Look at genting TT pics, then tell me if u think the muffler on my car is big.. brows.gif
Now no chance for u to kena tapau by me again lo
*
CC5 is nice?? i heard some batch of PE get it as stock?? is it true??yah..tats wat i just said, the rim will be after my new tyre botak, i saved up enough money i get the rim 2gether wit S-drive or later better tyre.
ur muffler not big and ugly like ah beng lah. hahahaha~~quite ok for me. wat bout the sound ah??

QUOTE(ckdenion @ Jul 27 2011, 10:47 PM)
ur car opti-sealed?how much u do?so aftr opti-sealed,it wont get dirty tat easily isit?
ayamas = ayam ciplak brand
i want at least 17''...y huh?erm...no reason...since wan to change rims...change to bigger ones ma...
i got an idea...remove ur current daylight LED...n d L shaped one..u asked them to do some modifications on d available slot there to fit the L-shaped LED
*
hmm.gif i still dun like the idea of my car bumper kena potong. bigger means better XD

QUOTE(ZenGTMM @ Jul 27 2011, 10:50 PM)
Ya lah.. the c2pid R3 never create 17", if not surely i take this rims ady..
Cap ayam loh.. Ayamas brand mah.. haha..
The effect after u apply Opti-seal is like ur car become glass like.. I thought my car color will become blacker, but it become really super glossy.. 1 bottle is around RM150.. Each bottle can apply 25 cars.. U only need to touch up every 3-4mths once..
This muffler hvnt change yet.. After change ady looks very big.. Tmr morning time i go take a few pics show u.. XD


Added on July 27, 2011, 10:53 pm
For me he do it for free.. XD.. But only do the roof and boot.. The rest he told me to clay the car first b4 opti-seal it.. Cos when u opti seal it locks in the road dirt and paint imperfections all into it.. So u need to make sure clay kaw kaw clean and smooth then only opti-seal.. If u ask him do it i think around RM200..
*
cam ayam. lol...difference with branded is??
optiseal. maybe i do it after i get my budget XD lots of things coming. service my car, change tyre, change filter,change SP, change extractor, change this, change that. so no money edi. hahahaha~~

QUOTE(ZenGTMM @ Jul 27 2011, 11:58 PM)
damn funny sia...

QUOTE(ZenGTMM @ Jul 28 2011, 12:01 AM)
B4 tidor need to laugh a bit.. hehe.. Chatting with my CKT atm.. Will sleep after that..


Added on July 28, 2011, 12:03 am
3rd pic the real rims color is actually even better.. Gunmetal inside finishing, with chrome inner lip stripe and metal finish outer spoke.
*
hmm...it edi look nice on the pic. hahaha~~my taste.

QUOTE(xandras @ Jul 28 2011, 12:33 AM)
Aiyo.. No need the link to show lah.. We can tell u more things than the link/brochure ever could.. brows.gif

B-Line:

1. No coil mat.
2. No trunk lid cover.
3. No steering control function for radio/HeadUnit.
4. No ABS, EBD, rear disc brakes.
5. Using Saga 1.3 brake pump.
6. Shorter rear bench, seats cannot be folded down.
7. No fog lamp.
8. No spoiler/bodykit.
9. No sport rims, only steel rims a.K.a pasu bunga rims.
10. No airbags.
11. No GPS.
12. Available in Auto/Manual.
13. No remote trunk release.

M-Line:

1. Coil mat.
2. Trunk lid cover.
3. Steering control function.
4. No ABS, EBD, rear disc brakes.
5. Saga 1.3 brake pump.
6. Slightly longer rear bench, foldable seats.
7. Fog lamp.
8. Spoiler & bodykit.
9. Sport rims/alloy rims.
10. Driver only airbag.
11. Lokatoo GPS.
12. Available in Auto/Manual.
13. No remote trunk release.

H-line:

1. Coil mat.
2. Trunk lid cover.
3. Steering control function.
4. ABS, EBD, Rear disc brakes.
5. Gen2 1.6 brake pump.
6. Leather seats with foldable rear seats.
7. Fog lamp.
8. Spoiler, bodykit.
9. Sport/alloy rims.
10. Dual airbag.
11. Cruise control.
12. Lokatoo GPS.
13. SafeTint.
14. Only available with Auto.
15. Remote trunk release.

For B/M/H-line, 2 years/50k KMs warranty. If u purchase the EWP (Extended Warranty Plan), 5 years or 100k KMs.

Loan interest depends on ur SA/your negotiation skills with the bank. Can get as low as 2.xx%,  but also as high as 4%.
*
actually wats a coil mat??

QUOTE(xandras @ Jul 28 2011, 12:57 AM)
Actually the bigger problem with the brake in B/M line is the lack of ABS & EBD, not the brake pump. Once U've replaced the brake pads, it works perfectly fine.

Why ABS, u may ask. PE is a fairly heavy car, & I think it's the only car in the market right now
weighing in at 1200 kgs without ABS. When u brake hard in the event of an emergency, the mass of the car causes a big inertia, thus the tyres will lock and the car slides forward at full braking capacity. This increases stopping distance. Professional drivers will know when to pump the brakes manually to avoid tyre locking, but normal drivers would not be able to react as quickly.
*
tat is why when a pro driving a car without abs it is still with abs. hahahaha~~like mentioned in initial d, a computer braking can never beat a person self braking. if a person never learn how hard it is to brake without abs, he will never be able to fully utilize the greatness of abs XD

QUOTE(KKW @ Jul 28 2011, 12:59 AM)
Crank sensor 
You better go now and check your crank sensor..
I just replace mine  smile.gif
My engine to hard to start.. first they blame my battery, then the problem get worst..
Went back serdang sc and plug in computer check on ECU said got fault code..
They straight order the parts thumbup.gif
For your information, crank sensor will cost RM 3xx 
This is a common problem on persona  rclxub.gif
Today damage RM 297 (labour charge+oil filter+fuel filter+castrol edge)  
btw, got one PE tapau me while coming back from puchong.. cry.gif
I was travelling 150km/h, that PE tapau me really fast..  
*
why u din try to chase XD
the engine hard to start is the symptom?? any other symptom??

QUOTE(xandras @ Jul 28 2011, 01:13 AM)
Not really racing pads. Just high performance brake pads will do. Some will recommend Bendix MKT, but I stand & swear my life by Rapid Stop RS 550'C brake pads. Doesn't need warming up for full braking performance, bites like a german shepherd. wink.gif
Told u it's my twin brother.. Or perhaps it's just the R3 ghost running around blink.gif
*
my god. lagi ada R3 ghost kah?? wat if one day u saw ralliart ghost or other XD
Rapid stop by maddriver?? wat bout the ceramic brake mentioned in the 1st page sold by kelvin??


Added on July 28, 2011, 2:12 am@zeng.
try post ur exhaust sound n see. XD i wanna hear.
i wanna to change but scare the noise make it uncomfortable when travelling highway.

This post has been edited by jasonloh7906: Jul 28 2011, 02:12 AM
KKW
post Jul 28 2011, 02:14 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(jasonloh7906 @ Jul 28 2011, 02:11 AM)
wow..i like the 1st and the 3rd. 2nd is not my taste XD hahaha~~
CC5 is nice?? i heard some batch of PE get it as stock?? is it true??yah..tats wat i just said, the rim will be after my new tyre botak, i saved up enough money i get the rim 2gether wit S-drive or later better tyre.
ur muffler not big and ugly like ah beng lah. hahahaha~~quite ok for me. wat bout the sound ah??
hmm.gif  i still dun like the idea of my car bumper kena potong. bigger means better XD
cam ayam. lol...difference with branded is??
optiseal. maybe i do it after i get my budget XD lots of things coming. service my car, change tyre, change filter,change SP, change extractor, change this, change that. so no money edi. hahahaha~~
damn funny sia...
hmm...it edi look nice on the pic. hahaha~~my taste.
actually wats a coil mat??
tat is why when a pro driving a car without abs it is still with abs. hahahaha~~like mentioned in initial d, a computer braking can never beat a person self braking. if a person never learn how hard it is to brake without abs, he will never be able to fully utilize the greatness of abs XD
why u din try to chase XD
the engine hard to start is the symptom?? any other symptom??
my god. lagi ada R3 ghost kah?? wat if one day u saw ralliart ghost or other XD
Rapid stop by maddriver?? wat bout the ceramic brake mentioned in the 1st page sold by kelvin??


Added on July 28, 2011, 2:12 am@zeng.
try post ur exhaust sound n see. XD i wanna hear.
i wanna to change but scare the noise make it uncomfortable when travelling highway.
*
I lazy... some more my brake are not really makan sweat.gif
jasonloh7906
post Jul 28 2011, 02:17 AM

New Member
*
Newbie
2 posts

Joined: Nov 2010


QUOTE(KKW @ Jul 28 2011, 02:14 AM)
I lazy... some more my brake are not really makan  sweat.gif
*
oh...din change brake pad or memang tak makan ??
IceBikers
post Jul 28 2011, 07:59 AM

Enthusiast
*****
Senior Member
960 posts

Joined: Jan 2003


updated my fuel comsumption from 10/06/11 until 16/7/11.. check my signature
KKW
post Jul 28 2011, 08:03 AM

Look at all my stars!!
*******
Senior Member
2,954 posts

Joined: Apr 2008


QUOTE(jasonloh7906 @ Jul 28 2011, 02:17 AM)
oh...din change brake pad or memang tak makan ??
*
I change before brake pad and rotors
Still tak makan rclxub.gif

QUOTE(IceBikers @ Jul 28 2011, 07:59 AM)
updated my fuel comsumption from 10/06/11 until 16/7/11.. check my signature
*
Why you dont use fuelly website?
IceBikers
post Jul 28 2011, 08:11 AM

Enthusiast
*****
Senior Member
960 posts

Joined: Jan 2003


QUOTE(KKW @ Jul 28 2011, 08:03 AM)
Why you dont use fuelly website?
*
Because I can have more data e.g.

-at what litre the pump auto stop refilling.
-how many litre more being refilled manually after pump auto stop.
-at what KM the fuel indicator is shown.
-at what KM the fuel indicator start to blink.
-at what KM stopped for refill.

ZenGTMM
post Jul 28 2011, 08:59 AM

Getting Started
**
Junior Member
155 posts

Joined: May 2006


QUOTE(jackyap84 @ Jul 28 2011, 12:14 AM)
my ori ride can play with urs? tongue.gif
*
haha.. can.. just rmb to wash ur filter after that.. cos all u are getting is my cat-conless smoke going into ur intake.. biggrin.gif

QUOTE(xandras @ Jul 28 2011, 12:33 AM)
Aiyo.. No need the link to show lah.. We can tell u more things than the link/brochure ever could.. brows.gif

B-Line:

1. No coil mat.
2. No trunk lid cover.
3. No steering control function for radio/HeadUnit.
4. No ABS, EBD, rear disc brakes.
5. Using Saga 1.3 brake pump.
6. Shorter rear bench, seats cannot be folded down.
7. No fog lamp.
8. No spoiler/bodykit.
9. No sport rims, only steel rims a.K.a pasu bunga rims.
10. No airbags.
11. No GPS.
12. Available in Auto/Manual.
13. No remote trunk release.

M-Line:

1. Coil mat.
2. Trunk lid cover.
3. Steering control function.
4. No ABS, EBD, rear disc brakes.
5. Saga 1.3 brake pump.
6. Slightly longer rear bench, foldable seats.
7. Fog lamp.
8. Spoiler & bodykit.
9. Sport rims/alloy rims.
10. Driver only airbag.
11. Lokatoo GPS.
12. Available in Auto/Manual.
13. No remote trunk release.

H-line:

1. Coil mat.
2. Trunk lid cover.
3. Steering control function.
4. ABS, EBD, Rear disc brakes.
5. Gen2 1.6 brake pump.
6. Leather seats with foldable rear seats.
7. Fog lamp.
8. Spoiler, bodykit.
9. Sport/alloy rims.
10. Dual airbag.
11. Cruise control.
12. Lokatoo GPS.
13. SafeTint.
14. Only available with Auto.
15. Remote trunk release.

For B/M/H-line, 2 years/50k KMs warranty. If u purchase the EWP (Extended Warranty Plan), 5 years or 100k KMs.

Loan interest depends on ur SA/your negotiation skills with the bank. Can get as low as 2.xx%,  but also as high as 4%.
*
B line got coil mat lah..
U banyak free hor.. haha..

QUOTE(RuL3s @ Jul 28 2011, 01:07 AM)
brake pad as in those racing pad? Any recommended brand for the pad?
*
Not recommended to get racing pads if u are not used to it.. Racing pads have to warm up first b4 they provide good braking, and it will makan ur disc really fast..

QUOTE(jasonloh7906 @ Jul 28 2011, 02:11 AM)
wow..i like the 1st and the 3rd. 2nd is not my taste XD hahaha~~
CC5 is nice?? i heard some batch of PE get it as stock?? is it true??yah..tats wat i just said, the rim will be after my new tyre botak, i saved up enough money i get the rim 2gether wit S-drive or later better tyre.
ur muffler not big and ugly like ah beng lah. hahahaha~~quite ok for me. wat bout the sound ah??
hmm.gif  i still dun like the idea of my car bumper kena potong. bigger means better XD
cam ayam. lol...difference with branded is??
optiseal. maybe i do it after i get my budget XD lots of things coming. service my car, change tyre, change filter,change SP, change extractor, change this, change that. so no money edi. hahahaha~~
damn funny sia...
hmm...it edi look nice on the pic. hahaha~~my taste.
actually wats a coil mat??
tat is why when a pro driving a car without abs it is still with abs. hahahaha~~like mentioned in initial d, a computer braking can never beat a person self braking. if a person never learn how hard it is to brake without abs, he will never be able to fully utilize the greatness of abs XD
why u din try to chase XD
the engine hard to start is the symptom?? any other symptom??
my god. lagi ada R3 ghost kah?? wat if one day u saw ralliart ghost or other XD
Rapid stop by maddriver?? wat bout the ceramic brake mentioned in the 1st page sold by kelvin??


Added on July 28, 2011, 2:12 am@zeng.
try post ur exhaust sound n see. XD i wanna hear.
i wanna to change but scare the noise make it uncomfortable when travelling highway.
*
Hmmm I will record and post the sound tmr lah.. Today not free.. Tmr if i get the pc fair then next week u remind me again on monday.

This post has been edited by ZenGTMM: Jul 28 2011, 09:02 AM
Josh_M
post Jul 28 2011, 09:34 AM

Regular
******
Senior Member
1,604 posts

Joined: Aug 2009
From: Kuala Lumpur
hope im not slowpoke.. just sharing ..

http://forum.lowyat.net/index.php?showtopi...post&p=44054450

5 Pages  1 2 3 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.1930sec    0.20    6 queries    GZIP Disabled
Time is now: 6th December 2025 - 05:43 AM