u should complaint! if just use double side tape DIY also can lar no need wasted time to send sc,
try using 3m tape. or find stronger tape that can resist water and heat, got bunch out there you can choose

my fren posted a rim picture...
i think it is not bad...just d wording on d rim not tat nice...

Which panel is that ??

The shop is EA autoworks.. I think i bring u to the shop in shah alam better.. There the fella can give a bit discount for me.. hehe..  Nope i dont think they have the normal cap ayam system.. for the balance of the system need to go to another workshop to get it installed..
hotbits.. the muffler we  can go survey around..
hotbits cost 580.. muffler cost 280.. total 860 ady.. balance need 2 bullets.. I got spare one at my house.. 1 is Xan's former Wegow 12" swirl bullet, another is a 9" stainless steel straight flow bullet.. mau ah?

Btw the shah alam shop got a 400+whp putra using evo3 engine.. XD.. Can go test drive if u want..

If you're within 1K mileage, then can go do it FOC at SC. After 1K, better do it outside. Abt RM5 per wheel. If 4 wheel, max RM20.

No need to tell SC and no warranty void coz wheel mana ada warranty wan. Wear and tear. Delay should not be a problem, might wear a bit on tyre tread evenness but if try not to delay too long.

---

Added on August 2, 2011, 10:06 am

Actually our oil filters (in fact most if not all small and mid-size sedan oil filters) can last abt 5K mileage only. This is based on our severe driving conditions that occur naturally in our weather (dusty, hot, humid, city drive, etc). Most mid-size and small sedan oil filters are downsized filters. It can only last 5K. Of course a new engine with little or no wear should be able to last 10K mileage on oil filter but for how long is it consider new under how dusty and hot weather.

Based on this site

http://autos.yahoo.com/owning/maintain/rep...bric%01qaengoil
"If you wait too long to change the filter, there's a danger that it might become plugged. To prevent this from causing a catastrophic engine failure due to loss of lubrication, oil filters have a built-in safety device called a "bypass valve." When the pressure drop across the filter exceeds a predetermined value (which varies depending on the engine application), the bypass valve opens so oil can continue to flow to the engine. But this allows unfiltered oil to enter the engine. Any contaminants that find their way into the crankcase will be pumped through the engine and accelerate wear."

So in conclusion, you can still use your filter way pass its limit......after a couple of years, can change new CPS engine mah..

Then if you say, how come those expensive car can go 10K to 20K only change filter. Well, their oil filters are definitely graded higher and bigger than ours and most small sedan. Not all oil filters are built the same size and quality.

Yeah true.. Our current persona the drum brake is next to useless in braking.. and with no EBD the behind brakes barely contribute to the braking efficiency.

---

Added on August 3, 2011, 10:59 am
Mine lowest 1.5L/100km.. haha..

There are rat in your car !   (just joking) this is due to the poor quality of plastic material use by proton for this WRM design.

1) Gonna have my service this week at Juru SC, they using Petronas Synt 800. Thinking of using better lube cuz my car's pickup from 0-60 very sluggish! Need to tekan kuat a bit then only can feel the torque. FC is about average 9.5, daily jam(considered no highway driving). Might need some suggestion on the brands and type of engine oil ASAP.
If your car are less than 10K km your 9.5 FC no highway is consider ok and normal, semi syn oil recomented Castrol magnetic due to its goos cold start protection and reasonable price.

2) Common problem with persona, tok tok tok sound when cornering on uneven road. Reported to SC but they said tadak bunyi ar! How to force them to change the power steering assembly???
ask them to drive the car on the uneven road together with you.

3) Left side dashboard got krak kruk krak kruk when road is uneven. The sound is very crispy!
was it come from the empty slot under the player, try put your hand in side the slot when the crispy sound came.

4) Driver side door panel making a slight "ting ting" bell like sound unocassionally.
it was the driver side door lock rod inside the door panel hitting the metal part inside can besolve by wraping the tape.

5) Something at the back is lose, having sounds presumably at the back speaker part. Should I ask them to screw everything tight?? LOL!
what kind of sound it could be the foldable seat hook if it is can besolve by wraping tape on all the hook and latch.

6) Front brakes making "kroooook" sound when stop and go. Already complain in the last service, but still there. Break pads issue? or perhaps the disk?
this sound are commond for auto trans. car with disc brake because we put it at D when realeast the break, when at D the car actually is trying to move fwd but our break stop it to move, so when release it sound the break pad mopping the disc sound.

I assume the Dowontech is the alarm system u posted a video of here last time..
Quality looks nice, start stop button looks expensive.. Wuwu.. If it was cheaper then I would have invested in it..
Me too.. Next mod is to change the back brake drum to disc brakes.

q3: the whole pics of plactic can be take out by slowly and using the sharp picking tools or small and flat screw driver, there are plastic hook around it slowly unhook all the then warp all the side edge by using small masking tape before fix it back.
q5: there are few latch not only the back cusion also under the seat. must tape both side hook and latch also.

---

Added on August 3, 2011, 6:43 pm
ppl said toyota alarm circuit boad just place at the lefthand side bonet wall just drill a small hole and spoil the board thas it BINGO.

I going shah alam next week.. one of my lecture recommend shop to change brake system 
That shop mod his track car 

boh bian...working is sien, this kind of topic can wake me up a bit...
sure, imagine u wearing c0nd0m the friction is reduce so last longer to climax...
same theory, add rubber reduce the friction metal to wind, also can reduce noise longer u time to get annoy

yup

---

Added on August 5, 2011, 8:10 pm

so wat u feel?the wind sound can be solve?