Hmm, always say say only.. now want make it happen d...

Xan this weekend free? Salary out i pass to u then recommend extractor liao..

mau install...

Bro xan, do PnP will improve FC or not? And how much is the cost? 

you done stage 1? i tough you said stage 2 abit dangerous for PE?

Haha.. u not muslim lah.. kena tangkap basah nothing will happen to u one.. Trust me.. Hehe.. I know better.. XD .. But the girl will kena lah.. Thats the prob.. So make sure its those 1 time fling girls.. hehe..
Ya lah got briefing.. maha1 go from bukit jalil all the way to kepong that bugger told me postpone to tmr .. D1un1aseng... wasted more than 1 bar of petrol and RM5.50 on toll.. Tmr have to reach there at 12pm sharp.
I put garlic in my car loh.. XD
eh bro cant join u in cose tmr.. Got lots of stuffs to do.. Damn.. Mb the next round i will try servicing in Intan Mayang.. XD..
Bro there got heavy repair or not? Or just for minor service only, no bodywork repair??
haha.. R3.. Here is one pic i took on tues after class..
[attachmentid=2354130]
No lah.. This R3 is heavier than those lightweight 17" rims..
No wonder today heavy rain everywhere...
  u really bery sure?? I love the rims..... 18" somemore.. If i had the money i would install it for sure.
Not really.. My current setup: Hotbits headers -> 12" 5Zigen Swirl Bullet -> 9" Ayamas Midbox Muffler -> 5Zigen S-flow Muffler. Power output increase a lot.. Can tapau all other PE while going up genting without any problems, and FC remains the same.. In fact FC on high speed highway travel is in fact lesser. The current stock piping is 1.8".. Its very much sufficient for 1.6 NA engine.. Going 2.0 will cause u to lose more low end torque at the expense of better top end.

Urs hvnt full throttle yet.. One of the days we need to rematch.. Lets see who gets to become crown king.. XD..

Ok folks.. gotta sleep early tonight.. Tmr early morning got bootcamp.. 

Yea.. So there are still plus & minus with the PE.. If FLX came out with 1.6 & CVT, there'll be almost totally no reason for ppl to get PE d..At least now the PE shows a better package in terms of power, space & interior refinement.. Saga inside really plastic, dun need say.. But as plastic as it is still not as plastic as Viva/Myvi (old)..

wow...damn big. hahahaha~~
wow..nice. i also wan~~

---

Added on July 29, 2011, 1:52 amjust back home. hahahaha~~tapau a civic. vtec engine sound even more noisy than the exhaust lor.

Sure can...my Civic tapau a M3 before.
He's driving slower than a turtle at that time

@genting now..any1?

Inspira soften? before just drive my friend lancer 2.0GT, the handling at highspeed are comparable to our PE, but u know lar lancer GT got 18'inch rim..

Inspira rims not suitable la.. U see how thick are the tyres.. Must go at least 18-19 inch for good handling.. Besides, if u compare stock PE with stock Inspira, I can tell u that both performs about the same when it comes to handling..

yup. ABS damn nice. it also saved a dog life XD bcoz managed to avoid hitting the dog.
yup. 5 behind. quite cramped edi. unlike my friend hyundai tucson XD
hahahaha~~y should one be sitting on my lap when i am driving lah. if at home can lah XP
suddenly miss all this things sia XD
ur iswara look like a bad guy. tats why the dog bite. XD
where is the things located ah??
go try youtube XD
btw i am satisfied with mugen, greddy, and hks silent power sound XD try youtube that.
wow. this test is open to all ppl or how??
hmm..i agree with altis pickup. its nice driving it.
mine smell hangus.

The filter u checked is the air intake filter. The proper air cond filter is the 1 located behind ur glovebox. Take that out & clean it..
Where got same? Our PE is 195/60/15. Inspira's tyres are 205/60/16. The sidewall aspect ratio of the tyre (60) is dependent on the width of the tyre (195/205), which means 60% of 195 = 117, 60% of 205 = 123. The higher ur sidewall, the softer it is & thus comfort improves but handling suxxo. Standard Lancer GT 2.0 tyres = 215/45/18. 45% of 215 = 96.75. Best way to end this debate is, remove Lancer GT's stock rims n tyres & fit it into Inspira, then drive it around.

So can put inspira stock 16inch into my PE if it's cheap

check this out..
http://www.mudah.my/Sport+Rim+ADVANTI+AXLE...RU-10833577.htm

Can u even use stock Inspira tyres n rims on ur PE in the first place?

took him 5 hrs, kautim from "head to toe" ... Very details detailer ...

Petronas made way more than that ciput RM 200 gift card they gave u la..

The shop is EA autoworks.. I think i bring u to the shop in shah alam better.. There the fella can give a bit discount for me.. hehe..  Nope i dont think they have the normal cap ayam system.. for the balance of the system need to go to another workshop to get it installed..
hotbits.. the muffler we  can go survey around..
hotbits cost 580.. muffler cost 280.. total 860 ady.. balance need 2 bullets.. I got spare one at my house.. 1 is Xan's former Wegow 12" swirl bullet, another is a 9" stainless steel straight flow bullet.. mau ah?

Btw the shah alam shop got a 400+whp putra using evo3 engine.. XD.. Can go test drive if u want..

Woah, 400whp. Damn chun. Wonder 0-100 like less than 5secs?

---

Added on August 1, 2011, 9:40 pmI notice after 2K millage of using Petronas, my oil like half black. Next will use either Eneos or Castrol.

my highest rev so far is only 4.5krpm which is on MEX highway...
running at 180kmh @ 4.5krpm
haven't try to go beyond that...i rmbr zeng las time test sam's car...rev till 6.5krpm to shift gear...

Confirm 4.7-4.8K RPM.. 200KM/h @ 5.25K RPM.. 210 @ 5.5K, 220 @ 6k RPM..
higher output than Type R engine.. I also wan..

Hello, member no. 249!!

cit cit sound at the back? From where? Since ur car is a BL, u dont have foldable seats so very unlikely the noise is from there. Check the rubber linings on the doors to ensure the noise isn't caused by friction. The vibration noise u hear on the bottom left front of ur windscreen could be caused by a loose bracket on the A-pillar plastic cover. I knew the problem was there for a very long time, just still couldn't figure out what can be done to permanently hold the bracket so that it wont move & make noise.

The 1.6 word can be DIY, but u should remove the remaining letters before sticking the new ones in. And the removing part is where u had to be careful because if not done properly u may accidentally remove the clear coat together with the letter. Which is not good.