Wow, the first pic is very exaggerated... it hardly looks like that!

Btw why are you planning to sell your monitors away?

Yeah, it hardly looks like that.. add in those purplish tint at the edges and you get that.

Well, I think I can't get used to the 16:9 format.
I think I need to go back to 16:10 format.

hi bro recently i just bought a 24 inch aoc lcd 2434pw. i plug in the vga cable and there is no display. if keep show no hdmi input and no signal. i try my other vga cable too but the same situation happen. really cant find any solution to it.

try other cable?

or try hdmi?

I think you need to change the input to VGA, for this you have to configure based on the manual.. because the monitor says "No HDMI Input, No Signal" which means it is configured to receive signals from HDMI input but you plugged it into VGA.

Ya same like switch to digital when using analog vga cable, just check on the monitor manual see press which button to switch the mode.

lol, sell coz world cup over liau?~

bro i figure it out d yesterday, actually is my mistake n panic, i thought i press the correct button, but end up is another 1. tht y cant choose from hdmi to vga. ><""

found that when i lowered U2410 sharpness from 50 to 40, the black level gets better (more dark) with minor loss of detail (a bit blur, but good for low megapixel video clip)
sun=10, moon =35 on adobeRgb mode

No one has any U2410 to dump?

Just a question: Does Dell usually do product discounts before PC trade events like the upcoming PC Fair?

So far, the lowest for the U2410 is RM1699 - RM200 (coupon) + RM62 (5 years premium panel guarantee) = RM1561.

Anyone here to share your ST2410 calibrated settings or just use the default factory's ones?

hey guys!

i got this sms just now saying that my lcd will be delivered on 14th July

does it mean it reached my house 14th or send it 14th(tmr)?

and i check the online status,it still remain at 16th July

i sked tmr i'm not at home while they come

im currently using the monitor B2330H
i tried to use the hdmi input.. and it does not actually fully fit my screen
the resolution is set to 1920 x 1080

my graphic card is msi HD4850 and im using a converter from dvi-hdmi
it is because by default my graphic card don have hdmi port..
any solution here ?
i wana use hdmi input and i wan it to fully fit my screen

get for cooperate rate. ask sales ppl to quote a unit for u. they know u r cooperate they will make sure ur warranty and stuff settle quick quick.

Just to tell u the warranty department is different from the one sending u the parts

Means if the warranty department want them to send fast fast they have no choice to send fast.
Means that if the part department know u r not a cooperate company they cant do anything cause the warranty department still recognize u as a company

This post has been edited by munak991: Jul 14 2010, 12:50 AM

I'm a little blur here.. must be tiredness catching up on me.

What you are saying is..

1. I should call Dell up and ask for a corporate rate as a registered private company.
2. They will settle my warranty and 'stuff' as soon as possible (not clear about this statement)

Confused la bro.

Your monitor will reach your house on the 14th. Forget the online status, it's crap.

Aiyo, on 1920x1080 DVI = HDMI lar... Your B2330H does not have speaker.

Just use the DVI port and see lar...






Actually you need to look for the scaling settings in CCC. just followed this steps:

1.Right click on desktop.
2.Open CCC.
3.On the left Open DTV (DVI).
4.Scaling Options.
5.Drag to 0%.
(Applicable to CCC 10.6)

Hey guys , im looking for a 24" LCD monitor . Mainly use for games ,
net surfing and the usuals . I want to use it for PS3 if it is possible.
Im also concern wit the screen sharpness . I look around some shops,
some monitor although its 24" , the image is abit blurry . Not nice to see.
Any recommendations ?

The blurriness might be due to a low resolution source material, like playing a DVD on a 1080p. The DVD's resolution is pretty low, so it may look blurry on a 1080p.

Some HDMI input on monitors enlarge the source slightly... got o the menu... the should be an option for 1:1 display..... is adjusting by drivers does not work....