I just showed the staff a piece of paper with info below .
kontrak tamat
swu 4.0
rm79 / 100mbps.

that is all. I was offered rm79 100mbps free 6 months but no free call.



This post has been edited by issac99289928: Mar 12 2024, 05:41 PM

Only these modems.

kajang?? Wonder when subang can start

Can intro ur agent to me?

yes, idk when your area will start. Perhaps you need to ask maya

ONR changed?;does they provide mesh router??
Can get pic

Can take a photo on the new BTU or ONR?

Does the ONR/BTU have 1Gbps or 2.5Gbps ethernet port ?

In my experience, only Maxis uses Quad9 KUL PoP

TM and TIME route to Singapore
Not sure about other ISPs

damn, DLink ONR? Which model?

yea onr changed, no need pic la. can search anywhere in google for unifi 1gbps onr

The usual Dlink cheapskate onr

Just 1Gbps LAN

Yea Dlink, DPN-FX3060V

"DPN-FX3060V COMBO BOX 2.5G UONU RG"

The QR code is just a link to the MyUnifi app

2.5Gbps GPON WAN interface with 4x1Gbps LAN ports.

This post has been edited by eclectice: Mar 13 2024, 11:55 AM

Any 1Gbps subscribers here?

Mind helping to confirm whether your upload speed is higher than 500mbps?

Was just doing something and wanted to speedtest and noticed my speedtest upload speed exceeded 500mbps (On my VM and router)



This post has been edited by yenchenje: Mar 13 2024, 11:46 AM

I would rather subscribe to low speed and having control over my equipment (wired/wireless router) rather than stuck with some crap equipment provided by TM at least for now, double-NAT is possible, but not worth it.

The UONU RG provides three modes: pure GPON Router, GPON-Bridge, and another mode whose name I cannot recall. It would be great if it supports bridging to avoid the double-NAT issue, which essentially converts the RG from fiber to Ethernet media converter. This would enable our third-party router to take over the PPPoE configuration. However, I am not entirely sure about the meaning of "GPON-bridge".

This post has been edited by eclectice: Mar 13 2024, 12:42 PM

You can use it as a pure GPON ONU like the lower speeds ZTE/Huawei/Fibrehome ONU, just have to set it up by yourself, and you’ll be limited to 940Mbps since GBe port overhead is a thing, I’ve used it in that mode before for a bit before going to GPON ONU SFP

Router Mode, GPON Bridge, RG Mode, RG is only for ATA from what it seems for now. My FX3060V is currently only in ATA mode serving pure VoIP mode

Have you ever changed it to GPON Bridge and let a third-party router take over PPPoE configurations and VOIP setup?

This post has been edited by eclectice: Mar 13 2024, 12:26 PM

.

This post has been edited by nikrizal: Mar 13 2024, 12:31 PM

PPPoE yes, not VoIP, as I’m not certain on how the settings for VoIP would be in a consumer grade router, and as expected 940Mbps max of DL and nothing more

VoIP for my setup was still on the D-Link ONR, I just set up the connection so that the port act as a bridge for the incoming fiber from TM, VLAN 500 was also on the ONR and not on my router

It’s probably possible but I have never tried to set that up on router, only after I’ve started to use GPON ONU SFP in my OPNSense box and pass through VLAN *400 to it

This post has been edited by yenchenje: Mar 13 2024, 12:35 PM