Outline ·
[ Standard ] ·
Linear+
AMD® Socket-AM2 Overclocking thread (V2), discuss our setup/overclocking issues
|
CV6149
|
 Sep 13 2007, 05:46 AM
|
|
QUOTE(rainingzero @ Sep 13 2007, 05:01 AM) highend windsor proc with F3 stepping can be get easily. the gem one is lower clocked windsor F3 such as 3800+ F3 really hard to get..dunno why la..... @sharpman u may oc ur proc, but cannot expect high/impressive ocing result as ur mobo got lower Vdimm selection. same case just like me....  u got good proc and rams there, maybe by changing to other mobo u can get good ocing result. but for me, i thinks its ok la to run ur X2 6000+ in stock. really syg la...  yes,low end F3 is like non existance in Malaysia.dun say 3800+ the 4600+ also cant be found.the lowest i found is 5200+ This conclusion i got after 2days 'camping' in lowyat n Imbi looking for it. was thinking to order online..but the postage cost more than the proc.really dont do any justice at all. |
|
|
|
|
|
sharpman
|
Sep 13 2007, 06:24 AM
|
|
|
QUOTE(rainingzero @ Sep 13 2007, 05:01 AM) highend windsor proc with F3 stepping can be get easily. the gem one is lower clocked windsor F3 such as 3800+ F3 really hard to get..dunno why la..... @sharpman u may oc ur proc, but cannot expect high/impressive ocing result as ur mobo got lower Vdimm selection. same case just like me.... u got good proc and rams there, maybe by changing to other mobo u can get good ocing result. but for me, i thinks its ok la to run ur X2 6000+ in stock. really syg la... after going thru this thread now I'm aware of our mobo's limitation but at that time my priority was to get a computer up and running again since I have 3 projects yet to be submitted. Maybe I just oc abit la.. won't go too far.. god willing if got extra money later I'll think about changing mobo...or better get those new gpu to replace my 6800GS  This post has been edited by sharpman: Sep 13 2007, 06:24 AM |
|
|
|
|
|
byfc2010
|
Sep 13 2007, 06:26 AM
|
|
|
QUOTE(-pWs- @ Sep 12 2007, 11:15 PM) I m using 195ns all the time.  The difference is very small IMO. -pWs-k thx... btw my last setting works d... memtest passed... |
|
|
|
|
|
X.E.D
|
Sep 13 2007, 08:07 AM
|
|
|
Aww... shacks. I'm capped to 2.6. =(
The thing just won't budge- I've loosened the RAM as far as it will go (5-5-5-15-21), 3x HTT and 262 bus.
Any more room you reckon? Volts?
I thought the 480X chipsets overclocked way better than this.
|
|
|
|
|
|
-pWs-
|
Sep 13 2007, 08:49 AM
|
Look at all my stars!!
|
QUOTE(CV6149 @ Sep 13 2007, 05:46 AM) yes,low end F3 is like non existance in Malaysia.dun say 3800+ the 4600+ also cant be found.the lowest i found is 5200+ This conclusion i got after 2days 'camping' in lowyat n Imbi looking for it. was thinking to order online..but the postage cost more than the proc.really dont do any justice at all. Low end F3 did exist in Malaysia, but in small quantity.  -pWs- |
|
|
|
|
|
dblooi
|
Sep 13 2007, 08:54 AM
|
|
|
QUOTE(-pWs- @ Sep 13 2007, 08:49 AM) Low end F3 did exist in Malaysia, but in small quantity. -pWs-can get if someone able to find those tray version 1. Most of those 3800 CZ available in tray version if im not mistaken. |
|
|
|
|
|
capriodimitri
|
Sep 13 2007, 09:44 AM
|
Getting Started
|
QUOTE(xixo_12 @ Sep 11 2007, 09:03 AM)
Added on September 11, 2007, 9:06 ambro, lower ht 3x..keep under 1000 up the vdimm try to stay at the lowest vcore first lower ur mhz.. then orthos.. up ur mhz until fail.. push the vcore again I try the following: Bus Speed: 280 mhz Multiplier: 10.5 Core Speed: 2940 mhz Vcore: Set 1.45v, system show 1.5v Memory Divider: 667 = 420mhz @ 1.9v HT: 3X @ 840 Orthosing still fail. I can only reach 2.83 stable as per my sig. Any idea, is it proc limitation? Vcore is really high de. Temp is good after using Xigmatek n X-1. 38'C till 54'C |
|
|
|
|
|
-pWs-
|
Sep 13 2007, 09:51 AM
|
Look at all my stars!!
|
QUOTE(capriodimitri @ Sep 13 2007, 09:44 AM) I try the following: Bus Speed: 280 mhz Multiplier: 10.5 Core Speed: 2940 mhz Vcore: Set 1.45v, system show 1.5v Memory Divider: 667 = 420mhz @ 1.9v HT: 3X @ 840 Orthosing still fail. I can only reach 2.83 stable as per my sig. Any idea, is it proc limitation? Vcore is really high de. Temp is good after using Xigmatek n X-1. 38'C till 54'C Use ram divider 533 to find out how high your processor can be overclocked. After found, only play with ram. -pWs- |
|
|
|
|
|
xixo_12
|
Sep 13 2007, 01:30 PM
|
|
|
QUOTE(capriodimitri @ Sep 13 2007, 09:44 AM) I try the following: Bus Speed: 280 mhz Multiplier: 10.5 Core Speed: 2940 mhz Vcore: Set 1.45v, system show 1.5v Memory Divider: 667 = 420mhz @ 1.9v HT: 3X @ 840 Orthosing still fail. I can only reach 2.83 stable as per my sig. Any idea, is it proc limitation? Vcore is really high de. Temp is good after using Xigmatek n X-1. 38'C till 54'C follow -pws-.. should lower the divider.. n tight or loosen depend on u.. try n error urself..  dun usik ur vcore.. ~xixo_12~ This post has been edited by xixo_12: Sep 13 2007, 01:31 PM |
|
|
|
|
|
arc_archive
|
Sep 13 2007, 01:39 PM
|
|
|
its seem my mobo already hit the fsb wall...
it end up at 334mhz...so giving me a total speed of 2.657Ghz...is there anyway by upgrading the bios the fsb wall can be increase??
|
|
|
|
|
|
dblooi
|
Sep 13 2007, 02:42 PM
|
|
|
QUOTE(arc_archive @ Sep 13 2007, 01:39 PM) its seem my mobo already hit the fsb wall... it end up at 334mhz...so giving me a total speed of 2.657Ghz...is there anyway by upgrading the bios the fsb wall can be increase?? Biostar TA690G? You can go much much further with it. Attached thumbnail(s)
|
|
|
|
|
|
mfcm
|
Sep 13 2007, 02:51 PM
|
|
|
here's mine 
32m superpi 
8hours prime stable..  gonna try lower my ram then push it higher fsb  here my spec: am2 4000+ biostar TF7050-M2 patriot 1x2gb ddr667 xigmatek S963 |
|
|
|
|
|
arc_archive
|
Sep 13 2007, 05:46 PM
|
|
|
QUOTE(dblooi @ Sep 13 2007, 02:42 PM) Biostar TA690G? You can go much much further with it. not TA690G...im using TF560 A2+.. wah..ur mobo can go such higher fsb eh??gud2..  |
|
|
|
|
|
likito
|
Sep 14 2007, 12:31 AM
|
|
|
QUOTE(mfcm @ Sep 13 2007, 02:51 PM) here's mine » Click to show Spoiler - click again to hide... « 32m superpi » Click to show Spoiler - click again to hide... « 8hours prime stable.. gonna try lower my ram then push it higher fsb here my spec: am2 4000+ biostar TF7050-M2 patriot 1x2gb ddr667 xigmatek S963 brisbane should be easy go higher clock , u got good cooler , happy OCing |
|
|
|
|
|
rainingzero
|
Sep 14 2007, 01:10 AM
|
|
|
QUOTE(sharpman @ Sep 13 2007, 06:24 AM) after going thru this thread now I'm aware of our mobo's limitation but at that time my priority was to get a computer up and running again since I have 3 projects yet to be submitted. Maybe I just oc abit la.. won't go too far.. god willing if got extra money later I'll think about changing mobo...or better get those new gpu to replace my 6800GS i think u should upgrade ur gc. since ur proc powerfull enough to handle latest games,just need newest gc only. maybe 8800gts?? |
|
|
|
|
|
sempronic
|
Sep 14 2007, 01:43 AM
|
|
|
QUOTE(mfcm @ Sep 13 2007, 02:51 PM) here's mine
32m superpi
8hours prime stable.. gonna try lower my ram then push it higher fsb here my spec: am2 4000+ biostar TF7050-M2 patriot 1x2gb ddr667 xigmatek S963 wahh??? u also got AMD system ar??? thought u already go to the dark force?? |
|
|
|
|
|
mfcm
|
Sep 14 2007, 02:34 AM
|
|
|
QUOTE(sempronic @ Sep 14 2007, 01:43 AM) wahh??? u also got AMD system ar??? thought u already go to the dark force?? haha i got amd rig ma..my 1st time rig is k7..still running at my hometown..the 2nd rig c2d n now jus finished built media center using this am2 so can count me on middle side? @likito yeah im trying to get high fsb later..perhaps wont bottleneck by my ram  |
|
|
|
|
|
Algojo
|
Sep 14 2007, 02:49 AM
|
|
|
Hi all lately im having problem after flashing to 828 bios for TA690G.My ram starting to become real PITA.After certain diagnose i found that i cant ran Dual Channel Mode even after i relaxed the timing and running on 2T.Now i revert back to bios 816 and there still a problem.Hope tonite im going to memtest both stick.Btw my ram need 2.2v to boot up and its a PITA to reset CMOS coz i need to jump start the system with Kingston PSC stick
|
|
|
|
|
|
cloudwan
|
Sep 14 2007, 10:30 AM
|
|
|
Bro soulfly just a minor update again: 4000+ X2 Brisbane G1 | cloudwan | ABIT KN9 SLi | Kingston DDR2-667 | Coolermaster Hyper TX | 2800MHz  Just wondering ar, why is it when i do superpi the volt in cpu-z would read 1.4v while when i do 3dmark2006 it reads around 1.37v?? Is it normal??  |
|
|
|
|
|
8tvt
|
Sep 14 2007, 10:44 AM
|
|
|
mobo suffer from vdrop n vdroop... normal..
|
|
|
|
|
Quote
0.0194sec
0.40
6 queries
GZIP Disabled