He's using the latest 605 bios IMO.
@waifaq please give us ur voltage reading as for vcore and vdimm and ur RAM timing with RAM divider.
1. Try setting ur HT link multi to 600 and make sure ur upstream and downstream HT Link is set to 16 bit rather than auto.
2. Manually set ur ram timing to relaxed timing e.g 5-5-5-12-2T

@camedemac

my abit nf-m2s only last for less than a week after xtreme OC and yeap u need to unhide the bios option using modbin6.

@xixo_12
yerp its overclockable but why dont u go for mATX like TA690G or TF-7050 it have all feature plus its overclockable.

yeah upload it somewhere.Btw izzit from taiwan or chaina? Try to get polygon from rH to mod soon
here is the link http://www.lejabeach.com/Biostar/TA690G/

This post has been edited by Algojo: Aug 19 2007, 11:54 PM

thanx dblooi even all the pages in chinese yet google translator give me just a slight help.
now happily running bios 717 even it's really a hassle for me to jump start my system everytime cmos cleared because my D9 need 2.2v vdimm to work it seems a few point boost using everest ultimate edition memory benchmark
kudos for the bios dude

This post has been edited by Algojo: Aug 20 2007, 08:06 AM

erk 727 or 717? which one is the latest or izzit just relabled?.I think i'll test 717 for a while.
Don't wanna jump start again n again
Anyway improvement in oc LYN TA690G users?

off topic i'm using Memset 3.3 but i couldn't see values for memory divider and frequency even using 717 bios

Hi all lately im having problem after flashing to 828 bios for TA690G.My ram starting to become real PITA.After certain diagnose i found that i cant ran Dual Channel Mode even after i relaxed the timing and running on 2T.Now i revert back to bios 816 and there still a problem.Hope tonite im going to memtest both stick.Btw my ram need 2.2v to boot up and its a PITA to reset CMOS coz i need to jump start the system with Kingston PSC stick