Tested my 4000+ stable until 2900 Mhz with stock Hsf.. 3000Mhz is unstable despite upping the vcore... dunno is it due to not burn-in enuf ???? Will experiment with some dram settings....

best way is to adjust the RAM setting 1st....
use the lowest ram setting...
see how far the proc can go....

are there anything else that i can do to my value ram that can improve overclocking result except to lower the divider??maybe some other tricks...???

actually,im kinda confuse a bit bout the way amd divider its a bit differ from intel one.

but will try later as my stock heatsink crying for being to hot already!!

need a better heatsink...last time pushing till 2.8Ghz..the temp shoot up too 60~65C when load.

This post has been edited by arc_archive: Sep 10 2007, 06:30 AM

changing the new one..

bro..what mobo do you use ?

tf7050?

Pump vdimm kaw kaw

I think better refer to the table in the first post. Then you will understand it.

-pWs-

ouu..those big chart wif all the ddr thingy rite??will have a look later..

anyway,ive finalize to get another proc+mobo for my brother edi...huhuhuhuh...now need a new gc and new ram ed...

pushing ram rite now is not my big target yet as im focusing on my proc first...when reach 3Ghz than will change my sight to Ram...

i believe this crucial can go up to 1300mhz as Tampoi have done it..Me??not yet push it..

@arc_archive
got new toy to play around arr??this time AMD??i can smell new AMD fan here....
1300mhz??nice ram and speed there...

try to push one by one?
new stuff ke??

~xixo_12~

dblooi told me 10th can achieve 1300mhz even 1400mhz also can ...
rock ram ..
gonna get one pair

This post has been edited by likito: Sep 10 2007, 02:01 PM

Spams removed. Please stick to the topic - SOCKET-AM2 OVERCLOCKING.

huhuhu..not la..actually,i buy this mobo+proc for my bro..but suddenly want to try ocing it...and when i do...ive fall in love wif this proc

quite one la....

better get it fast coz im gonna get another pair for dis AMD rig...huhuhuhuhu

anyway,juz changing the HSF to Zalman CNPS9700 LED and im pleased to so see the temp is at considerable level for my 2.7Ghz speed.

i will try to push it higher..later,as i need to let the TIM burned b4 can oc kaw2..

This post has been edited by arc_archive: Sep 10 2007, 08:39 PM

oic.... for me, really frustrated last time cannot afford to upgrade to c2d, end up AM2 X2.now i really love my rig, really worth it for cheap2 setup...

This post has been edited by rainingzero: Sep 10 2007, 11:27 PM

lower the trfc value instead of using 75NS. It is too tight for most of the value ram. However, if you are using D9 ram, just keep this value(75NS), i realized that D9 ram love being tighten, when i loose it , it won't work

@dblooi

yes that is correct for some reason D9's love that timing :S

for kingston and patriot value rams using hynix fpy5's, up the trfc to at least 127.5 or 195 for best ocability and stability

Thks for the tips...since i'm using Patriot I'll ry this value. Tomorrow I will try to push it to 3G by changing the trfc... so far 2.9G is the most stable it can go .(already tried vdimm & vcore increase can boot but in XP crash. )

Need help. The highest stable so far is 2.83 ghz. I try the following after that:
-Lower HT to 4X (1120mhz)
-Lower Ram divider to 677 (420mhz), vdimm 1.9v
-increase vcore to 1.435 (but system show 1.488 in wndows/bios)

System still fail Orthos at 2.94ghz (280mhz bus speed, multiplier 10.5)

This post has been edited by capriodimitri: Sep 11 2007, 09:03 AM

---

Added on September 11, 2007, 9:06 ambro, lower ht 3x..keep under 1000
up the vdimm
try to stay at the lowest vcore

first lower ur mhz..
then orthos..
up ur mhz until fail..
push the vcore again

This post has been edited by xixo_12: Sep 11 2007, 09:16 AM

this time i play my ram...



trfc is 127.5ns...
vdimm 2.03V*...
will tighten trfc soon...

This post has been edited by byfc2010: Sep 11 2007, 05:12 PM