juz got my brother a brisbane with biostar mobo..

manage to go up till 2.7Ghz with stock cooler

3600+ X2 Brisbane G1 | arc_archive | Biostar TF560 A2+ | Crucial 10th Ann 2x1GB PC5300 667Mhz| AMD Stock Cooler | 2700MHz





actually,i felt a bit diffrence when orthosing using AMD proc compare 2 intel...it seems much smoother and much faster to load program while orthosing.

thought to used this brisby rather than giving to my brother edi..and got him ANOTHER proc+mobo

its been a while ive dumped my amd and now i feel the difference!!

This post has been edited by arc_archive: Sep 9 2007, 08:59 PM

actually,im kinda confuse a bit bout the way amd divider its a bit differ from intel one.

but will try later as my stock heatsink crying for being to hot already!!

need a better heatsink...last time pushing till 2.8Ghz..the temp shoot up too 60~65C when load.

This post has been edited by arc_archive: Sep 10 2007, 06:30 AM

ouu..those big chart wif all the ddr thingy rite??will have a look later..

anyway,ive finalize to get another proc+mobo for my brother edi...huhuhuhuh...now need a new gc and new ram ed...

pushing ram rite now is not my big target yet as im focusing on my proc first...when reach 3Ghz than will change my sight to Ram...

i believe this crucial can go up to 1300mhz as Tampoi have done it..Me??not yet push it..

huhuhu..not la..actually,i buy this mobo+proc for my bro..but suddenly want to try ocing it...and when i do...ive fall in love wif this proc

quite one la....

better get it fast coz im gonna get another pair for dis AMD rig...huhuhuhuhu

anyway,juz changing the HSF to Zalman CNPS9700 LED and im pleased to so see the temp is at considerable level for my 2.7Ghz speed.

i will try to push it higher..later,as i need to let the TIM burned b4 can oc kaw2..

This post has been edited by arc_archive: Sep 10 2007, 08:39 PM

wut exact temp reading compare wif biostar own temp reading huh for brisbane??is it the diff so obvious??
afraid that i overtemp edi.

when off buying a new proc for my brother...ive bought an AMD 3000+ Orlean core for replacement the brisbane core...

rite now orthosing at 2.4Ghz.will post pic later.

its seem my mobo already hit the fsb wall...

it end up at 334mhz...so giving me a total speed of 2.657Ghz...is there anyway by upgrading the bios the fsb wall can be increase??

not TA690G...im using TF560 A2+..

wah..ur mobo can go such higher fsb eh??gud2..

my brother Orleans in action

arc_archive | BIOSTAR TF560 A2+ | Crucial 10th Ann PC5300 | Zalman CNPS9700 LED




it seems my mobo hit the fsb wall edi...cannot oc more.

out of topic..
SanGuoZhi is Romance of Three Kingdom rite??ya, i do play it and love it so much actually..had followed it since the fifth version till now 11th..
so craze bout this game...eventhough i cannot read chinese played with ps2 version...

i do hope that my fsb can go higher..like 350mhz...
how bout this mobo 690 chipset..how high it can go??more than 350mhz huh??
rite now going to test my brisby again for higher speed as i juz got my new psu...coz last time,it seem the speed didnt stable enough..keep restarting..
any idea huh??

huhuhuhuhu...coz b4...i played wif intel proc...so the term fsb is easy to state the HT thingy..

huhuhuhu....cannot give the best one wut...later play games rather than studying...
orlean gud wut...can oc till 2.6Ghz...but my bro didnt know how to oc ler...

i know..but rite now,im going to push more on my proc yet..as im not yet satisfied wif my current speed...
will continue wif mem after got sweet spot for my proc..

last time i try to push my HT@FSB to 380..but when boot in window,check wif cpuz it state only at 355 only...wut the hell...

try change the value that not lower than 355...still no changes..still stuck at 355..anyone encounter this prob b4??

wah!!when u said that,than i juz realize that i put the ram wrongly

will adjuzt later...thanx man!!

what a shame

coz my previous mobo mosly using slot A and C rather than A and B...

so i tot it juz the same... plug both Ann and run without noticing bout those dual channelling thingy..

me so shame !!

rite now,i try to push my brisby to get 3Ghz...here's my detail:

FSB: 350
M'Plier: x8.5
VCore: +0.135
Vdim: 2.15
Ram: 400
Vfsb: 1.275

still,the setting cannot pass orthos...running like 2~10min..fail edi....do i really need to use x8 M'Plier??when using x8 it seem orthos pass withou any prob..but if using x8,i wil only get 2.8+Ghz speed only as my mobo cannot go more than 350...anyone...any idea??

brisby 3600...i already tried x9 ...still fail orthos after few min..tried increasing voltage to 1.42V still orthos failed...VFsb to has been increased to 1.3V..still no effect...

thats y i ought to try my luck with x8.5...but still the stable one would be x8..last time try at 2.84Ghz..running orthos 6 hours no prob...

here's my screen shot while doing stress on 2.85Ghz using x8.5 ....and im using Crucial 10th Ann...



later i will try posting the screen shot when orthos fail.

already try wif x9...still the result is for sure to be in vain....and for that screen shot...if failed after few min later...

ok i will try using x9...even x9.5 muliplier but it seems using this biostar mobo...its sort of difficult to understand those ram thingy...it seem that the option available in bios is not much...rite now im using auto setting for ram timing.

huhuhuhuhu...so embarassed of myself

ive tried to set it manually but somehow..if the HT are high,it seems the system cannot boot..here's my orthos that failed:



no gay no pay ...huhuhhuh...juz joking

can i use memset to set the timing for my crucial??is it setting will revert back when restarting??coz...truly...im not that understand bout the bios setting...with those 73ns or wutso ever....