Nap? If you want to access the 'Advance' its at at the top tab navigation there

Quick Setup | Basic | "Advance"

I'm refering to the reply below. How to access the NAT Boost from the Advance setting. Where to locate it? Tq

Advance > System Tools > System Parameters > NAT > NAT Boost (make sure checkbox is checked)

50 per torrents, I got maybe 15-20MB/s sometime, but rarely, the speed you get depends on luck.
Even there are a few thousand seeds, you don't get 50 connections at one go, even you get 50 connections, if they are all streamyx users, also won't help.

The instructions is there lol.

I even got up to 900+Mbps before downgrading to 500Mbps.

Please advise.. Noob here.
Is it from the System Properties > Advance or Internet Properties > Advance ?
Seems, i can not locate it ?

Which router that you're using?

The TIME stock router C1200?

Thanks.

What router are you using?

Ahh, you need to login to your router to change the setting that I've mention above not in your windows.

URL and username/password to login to your router usually printed at the bottom at your router.

Yes.. Acher C1200. Tq

Ohhh. Thanks a million. Will give it a try

First thing, login to your router via 192.168.0.1 on your browser.
Key in your login ID and Password.
The Password is TIMEXXXX, the XXXX is the last 4 Mac address of your router.

Go to Advance tab and follow the instructions.

Thanks.

I tested with a Macbook, this is what I got. Using a 68U and it's plugged in the gigabit port, cable is a 10m CAT 7. The technician tested my cable on his laptop and he got 900+ down 500 up.


This post has been edited by TableBottom: Oct 15 2018, 09:02 PM

Thanks for the detail. Just login and saw the the NAT Enable and Boost are both Checked.
Uncheck and Recheck again and then save. Still can not get the 500mbps to work.

Reboot from the tplink login also can not solve the problem of the said upgrade to 500mbps. it is still app 90+mbps

Any other advise that i can try.

Hi, try to perform direct connection to ONU and check whether you can get full speed of 500Mbps.
To perform direct connection, you must get your PPPoE details ready.

Or alternatively, you may try to restart your both equipments.
Check whether your PCs is capable of getting above 100Mbps over LAN which the link speed shows 1Gbps on your laptop.

You may WhatsApp me if you need a faster response.

Thanks.

This post has been edited by FusionXY: Oct 15 2018, 09:19 PM

Thanks again. Greatly appreciate your advise.

You're welcome.

I'm able to help you out with other things.

I hope your issues can be solved.

Thanks

Your result shows that your local network is fine and can achieve 900+Mbps.

The bottleneck should be on your router or incoming bandwidth from modem.

Try to do direct pppoe from your modem to your laptop to bypass the router as FusionXY suggestion above.

I understand that other 1 Gbps users have similar issue because TIME has not fully upgraded their hardware to accommodate 1 Gbps. Currently I believe Time is using 2.5 Gbps uplink, so.... if more than 3 subscribers are on the 1 Gpbs package, 2.5 Gbps uplink will overload.

If TIME has not fully upgraded their hardware, then don't inform customers that their speed has been upgraded to 1 Gbps or accept new customers with 1 Gbps.

So now I may ask TIME to downgrade me to 500 Mbps and see if the same issue exists.

I actually did a direct pppoe a few days ago during a call with TIME support. The speed was actually slower LOL, like around 100-200 Mbps down/up