Did u orthos fail when running 400x8 with 1.4 vcore? i got more higher temperature than urs

That setting was a stable setting. Orthos 18hrs without fail.

maybe i should try vcore 1.4v coz i havent tried that using 400x8

maybe tats ur limit edi.. get D9 la.. hehe.. i can say its stronger than my hynix..

i tot vcore only need if running higher clock speed?
im not sure tho'..stil noob oc'er mayb i'l pump more vcore n see wat happen

stil on hynix bro...nobody sells cheap D9..mjoe no more stock rite?

i oso wish i can get on hold of D9 but if i were to switch i will get 1gbx2..cz now running 512mbx2 liao...

Is this similar to the hynix C4 you guys been talking about?
Link

I might buy it and sell my OCZ Platinum RAM... Wanna cut some cost...



Upping vCore can stablize the RAM? I'm currently undervolting my Proc at 1.225V. RAM becomes unstable at over 450MHz... If yes I might try upping the voltage...

This post has been edited by MaGicDust: Nov 12 2006, 06:32 PM

wah...u frm UK izit? wanna get that C4 ah?

ur ocz ram no good in oc ka? wanna downgrade?
can i knw hw oc-able is ur ocz ram? i might consider it since its a 2gb kit

This post has been edited by siauann: Nov 12 2006, 07:35 PM

Can't see the RAM. But i'm quite sure tat its the same as mine. OMG its selling so cheap oversea...

I'm from Ipoh, sudying in the UK... The OCZ RAM very ex. Bought for 170pounds ~ RM1200. The Hynix C4 only cost 110pounds ~ RM700ish, so wanna save some money... About OCbility, I can run 4-5-4-15 at 450Mhz @ 2.1V... System is stable but give a few errors when Memtest for 24hrs... I dropped it to 430MHz and now is completely stable.

But gengstapo said that low vcore might affect RAM stability. Not sure bout that... If it is so, I might try upping the vCore and try to up the memory speed again cause now i'm undervolting at 1.225V @ 430MHzx7

Yr Hynix is extremely good ledi.. OC better than D9...
Hynix 533 can reach 1000.. tht is about 100% OC..
D9 800 can only reach <1100.. about 35% OC only.


UK RAM is cheaper than here.. 2GB = 110pounds = RM 770
I tot my fren say here is cheaper than UK
Yr E6300 bought from UK too?? how much??

This post has been edited by yehlai: Nov 12 2006, 09:22 PM

UK should be as cheap as US without the Value Added Tax. Else, it is cheaper to buy in malaysia cause buying in UK will cost 17.5% more. I bought my e6300 for around RM770 OEM version which is not cheap. However from time to time it is possible to get cheap stuffs from online store, but generally UK is more expensive than Malaysia and I think US is still among the cheapest country to buy computer stuffs, not sure about China ...

I got the pic of the C4 here:


CODE AS FOLLOWS:

1 GB 2RX8 PC2-4200O-444O12
HYMP512U64BP8-C4 AB-T 0641

So you guys think this is the right one? If yes I might quickly grab myself the bargain before its gone... He is selling 2 sticks atm...

Hi Magicdust,
If it helps these are my KVR533 1GB Hynix C4 sticks - slightly diff code though.



Currently doing DDR800 4-4-4-10 @ 2V.

nice result U got there...C4 is a nice value chip. I wish my Corsair VS can do that. Doing DDR800 4-4-4-12@ 2V as well...Memtest overnight, no error.
For 700ish, it is a bargain ( espicially at UK). Grab it b4 U miss out the chance.

This post has been edited by mikelanding: Nov 12 2006, 11:43 PM

Duh... Didn't inform me i just sold my pair.

I think the code is different cause the code I wrote is for the whole RAM module... The code on the RAM chips suppose to be different... Anyway, I went to Hynix website and checked... I think they are the same RAM chips... Btw, what's the Vcore of your proc currently?

Hehehe... Maybe can try to bid rather than using quick grab, then the price can be lowered summore...

siauann, will you tell me the speed, timing, vDIMM and the vCore that you are running on atm with ur c4?

This post has been edited by MaGicDust: Nov 13 2006, 12:39 AM

yikes... tidak cantik la u... tat time ask u wanna sell or not u ask me go get from mjoe... i need another 2 ba... see... always don wanna sell your stuff to me...

KVR Hynix performs same as OEM Hynix?

This post has been edited by ddww: Nov 13 2006, 03:18 AM

That's purty good also. For me x-x-x-12 or x-x-x-10 no diff, you don't see the diff in day2day apps, only in synth benchmarks. As long as ur system is stable then good enough liao.

Magicdust - using a e6400 @ 3.2GHz @ 1.25V Vcore.

Sorry bro i thought you had bought it from Joe already so i just post it in the garage sales...

This post has been edited by tAmp0i: Nov 13 2006, 02:21 PM

Memory timing is not so important in C2D. Most between 2 extreme timing is around 5%. Also, I don't see much gain after 3Ghz and above. Most likely our Graphic card can't keep up with the procs.

that's what i heard as well...that's why for c2d, i'd go for ram with higher fsb, to hit 1:1 with the proc...and yes, for synt benchmarking, might have some improvement with tighter timing especially for SPI...so, my choice of ram: big fat ram (capacity) and high fsb (even thou i'm waiting for the Crucial 10th Anni...not becoz of the timing but the fsb )

This post has been edited by remysix: Nov 13 2006, 02:40 PM