Screenie for D9 chips RAM 3-4-3-4 @1087.5Hhz
i failed to run @3-4-3-3 now... maybe need +vMCH.




This post has been edited by yehlai: Nov 10 2006, 06:19 PM

@Tampoi
its not bug.. actually FYI tht setting is not stable one.. Failed Prime test.
I tried 1:1 setting before.. but my E6300 cant go beyond 437fsb. So i have run 2.5 multipler try to 'burn in' my ram with +0.6vDimm because i dunno how to use memtest.. dont have floopy drive too..

This post has been edited by yehlai: Nov 10 2006, 06:43 PM

wao.. preety good temp @3.20GHz..
i am planning to get a scythe infinity or scythe mine too..
but someone told me Ultra-120 is better..
how much Ultra-120 cost?? wht was ur oc temp using stock fan??
THANKS

This post has been edited by yehlai: Nov 11 2006, 01:14 AM

Yr Hynix is extremely good ledi.. OC better than D9...
Hynix 533 can reach 1000.. tht is about 100% OC..
D9 800 can only reach <1100.. about 35% OC only.


UK RAM is cheaper than here.. 2GB = 110pounds = RM 770
I tot my fren say here is cheaper than UK
Yr E6300 bought from UK too?? how much??

This post has been edited by yehlai: Nov 12 2006, 09:22 PM

for me.. memory is the most important thing, becos my proc aldy reach the highest limit. So i have to run tighest timing to get good score in Super Pi.
running 1087Mhz @3-4-3-3

already oc?? mind to share some screenie?? :droll:

Sorry guys OFF TOPIC.
OC means warranty void for proc and mobo??

Why dont u start a Quad core oc board?? look forward on it..

E6300 got 4MB L2 cache?? But the effects are not significant..
HERE

This post has been edited by yehlai: Nov 27 2006, 06:49 PM

Wao spend a lot time for primming..
I dont have tht kinda patient and time

Why Asus is better in OC?? its cheaper then DS4 though..
Izzit becos their vCore more stable??

set FSB to 400 and multiplier set to 2x, PCI-E set 100.
With stock vCore 2.8Ghz no prob

@basSist
Can ur E6400 go beyond 400 FSB?? how much vCore needed??

eh.. E6400 not stable when >400fsb?
I am planning to upgrade to E6400 now, hope can get higher OC. Now my E6300 can only hit 440fsb. But im not satisfy . I tot E6400 can easily hit 400fsb.. i sold my E6300 alrdy

Yes i know E6600 is better bocoz hv higher multiplier.. but i dont need 4GHz clock speed for now. Previously my E6300 can hardly reach 3Ghz, its alrdy sufficient for normal use. Really fast enough.
Reason i wanna get E6400 is just wanna get a proc tht can easily hit > 3.2GHz, thts all.. nothing more.
Moreover, i only need to op up RM60 to get a E6400 after i sell my E6300 with RM600. If E6600 i nid top up few hundreds.. sakit hati
Just Oc for fun and like goldfries said, Better proc is good for benchie, for normal use, E6300 got not much different with E6600. (rich E6600 user dont flame me ok )

This post has been edited by yehlai: Dec 6 2006, 01:39 PM

My E6300 can run 1.275 vCore @400fsbx7 stable. I prefer undervolt vCore to get lower temp at higher clock speed.

vCore is 1.325 la dude... lolz i scared tht guy fry his new proc if use 3.25v. Nid P.M him fast b4 he OC.
Wao.. u got FMA PSu ledi. Good ler


Edit:
Not much different. Your E6300 stock is 266fsb x 7multiplier = 1866 or 1.866GHz
If u over clock by increasing the fsb to 400fsb, it will be 400fsb x 7multiplier = 2.8GHz.
The stock vCore is 1.325v, vDimm= 1.8v

This post has been edited by yehlai: Dec 7 2006, 11:51 AM

Tht 1066 is Rated FSB. Its is 266x4 = 1066. ( i dunno why u need ask other)
Ignore tht, just adjust the fsb. Stock reading should be 266.

Edit: check with cpu-z the u will see

This post has been edited by yehlai: Dec 7 2006, 11:55 AM

You mean using TAT load 100% to test?? Will tht help to burn-in a lot?

This post has been edited by yehlai: Dec 7 2006, 10:49 PM

He running 2.24GHz.. only oc a bit.