Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits
|
|
 Nov 10 2006, 06:13 PM
Return to original view | Post
#1
|
 
Senior Member
2,865 posts Joined: Jan 2003  
|
QUOTE(basSist @ Nov 10 2006, 05:53 PM) oh.. ok Try increase yr Vdimm =+0.3 and Vcore to around 1.375 or even 1.4..Remember to lock yr PCI freq to 100MHz ....Use TAT to measure CPU temp... sory still newbie. but still failedin one copy.Vdimm +0.1v. ok will try later  Vdimm +0.1 means.. 1.9v? default at 1.8v right?  |
|
|
|
|
|
Nov 10 2006, 06:29 PM
Return to original view | Post
#2
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(basSist @ Nov 10 2006, 06:26 PM) ok thanks U had to try yr own on that...I suggest leave all to normal first...changing too much variable will confuse U more...  do i need to increse the pci-e, fsb and mgch overvoltage things? P/S: Interested to know yr temp @ TAT...do let us know ya? This post has been edited by mikelanding: Nov 10 2006, 06:30 PM |
|
|
Nov 10 2006, 06:39 PM
Return to original view | Post
#3
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(basSist @ Nov 10 2006, 06:37 PM) ok. i am now trying to prime it at all default including the cpu and ram. see whether orthos fails o not. this is the tat's temp. Wow...hot hot . Orthos still running now. phew~ » Click to show Spoiler - click again to hide... «  ...66C at Default vcore =1.325v? if yes, U might need to do something on the stock HSF...This post has been edited by mikelanding: Nov 10 2006, 06:40 PM |
|
|
Nov 10 2006, 06:43 PM
Return to original view | Post
#4
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(yehlai @ Nov 10 2006, 06:40 PM) @Tampoi errr...that is not a proper way to burn in yr ram.its nt bug.. actually tht setting is not stable one.. Failed Prime test. I tried 1:1 setting before.. but my E6300 cant go beyond 437fsb. So i have run 2.5 multipler try to 'burn in' my ram because i dunno how to use memtest.. dont have floopy driver too..  For memtest (window) just run 2 instance, choose "All unused RAM" For memtest86+ (DOS), U can boot into DOS using USB thumbdrive... This post has been edited by mikelanding: Nov 10 2006, 06:43 PM |
|
|
Nov 10 2006, 10:17 PM
Return to original view | Post
#5
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(basSist @ Nov 10 2006, 10:02 PM) yeah.. i think something wrong on my HSF. How u all apply the thermal paste on the processor? maybe my method was wrong.. got 2 methods i know off:1) AS5 official guide which I normally use AS5 application guide 2) Other method is "In the center of the cpu heatspreader, put a drop of thermal paste the size of one bb. Then just squish it down with the heatsink, lock your heatsink in" GL QUOTE(gengstapo @ Nov 10 2006, 10:16 PM) hot ka?? i dont thinks so. on air cooling it should be normal My temp. Using Ultra-120  same as mine here :   » Click to show Spoiler - click again to hide... « This post has been edited by mikelanding: Nov 10 2006, 10:53 PM |
|
|
Nov 11 2006, 01:15 AM
Return to original view | Post
#6
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(yehlai @ Nov 11 2006, 01:06 AM) wao.. preety good temp @3.20GHz.. Ultra-120 around Rm200+...not sure about market price. I got it from a forumer here.i am planning to get a scythe infinity or scythe mine too.. but someone told me Ultra-120 is better..  how much Ultra-120 cost?? wht was ur oc temp using stock fan?? THANKS I dun use the stock cooler so ddont know the temp. I actually upgrade from XP-120 to Ultra-120...I got around 10+C reduction from this upgrade. Side Note: I couple ultra-120 with NBM 12X12X38 (sold by AllnGap) running at low speed. I tried full blast the fan, only around 2C drop. But I cant bare the noisy... . Now fan stay at low speed@1700RPMThis post has been edited by mikelanding: Nov 11 2006, 02:04 AM |
|
|
|
|
|
Nov 11 2006, 11:07 AM
Return to original view | Post
#7
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(sup3rfly @ Nov 11 2006, 04:39 AM) i m using scythe mine now...but i think ultra 120 is better.... well i have no hardware to test out the infinity yet as my fren find its hard to remove it...so i cant borrow it from him Aiseh...U should had act fast had grab that Ultra-120.... compare ultra 120 to infinity they shd be around the same according to reviews but the size of infinity is just too big, u might have fitting problem ler.... since the performance of ultra 120 is around the same as infinity and ultra 120 is smaller in size.... it shd be better... well just my 2 cents....  wanted to get also from svc.com few days back, they put put the price wrongly .... usd 39.99 only...then the 2nd day i check again it goes back to 49.99  now i have 3 air coolers in mind.... infinity , ultra 120 or tuniq tower 120 btw my idle time for scythe mine + fm121 fan @ around 1700rpm is 42 - 45 degree without air cond and loda will be around 58 degrees or 60 ....i dunno if its good or wat...conroe is so freaking hot!!!!   Yr idle temp seem to good to me. Mine idle around 45-47C. But your delta after load is kind of bad...Maybe yr Mine cannot tame yr beasty E6700@ 3.77GHz Why not give Tuniq Tower 120 a try since U can get it at state. We at here no chance to get it... So far I didnt see any1 in Lowyat had it. Maybe can give us a Mine vs Tuniq Tower 120 review.. |
|
|
Nov 11 2006, 08:20 PM
Return to original view | Post
#8
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(sup3rfly @ Nov 11 2006, 07:32 PM) i m suing silverstone fm121 fan ler...not delta fans Opp...my meaning of "Delta" is "change in" temperature between load and idle. Sorry that i misleading U......i liek ultra 120 coz its smaller than the other 2.... hehe i might be getting tuniq....btw a high end wc set is on da way after i got my mobo, gc and hdd my 3.77 is shitty man... i m expecting more!!!! Watercooling  ...time for U to whack it to 4GHz? or more.... This post has been edited by mikelanding: Nov 11 2006, 08:21 PM |
|
|
Nov 12 2006, 11:42 PM
Return to original view | Post
#9
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(Diademz @ Nov 12 2006, 11:10 PM) Hi Magicdust, nice result U got there...C4 is a nice value chip. If it helps these are my KVR533 1GB Hynix C4 sticks - slightly diff code though. [attachmentid=153828] Currently doing DDR800 4-4-4-10 @ 2V.  I wish my Corsair VS can do that. Doing DDR800 4-4-4-12@ 2V as well...Memtest overnight, no error.For 700ish, it is a bargain ( espicially at UK). Grab it b4 U miss out the chance. This post has been edited by mikelanding: Nov 12 2006, 11:43 PM |
|
|
Nov 14 2006, 09:58 PM
Return to original view | Post
#10
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(cyberion86 @ Nov 14 2006, 08:28 PM) anyone here mind to share your vcore setting for E6400? i'm not able to do 450 even at 1.6v with vMCH +0.3 and vFSB +0.3. By the way, my ram was capable of that speed. wow...U whack yr system till extreme E6400 L626A754 Mushkin DDR2-667 2GB DS3@F7 C2 ...hope U had good HSF and active cool yr NB and ram.Most of DS3 mobo had difficulty in overclock above FSB450. Only few lucky 1 manage to do that. I suspect either yr Proc or mobo chipset had hit the wall. U might want to try Asus P5B-Deluxe which prove to be more overclockable compare to DS3 This post has been edited by mikelanding: Nov 14 2006, 09:58 PM |
|
|
Nov 15 2006, 05:50 AM
Return to original view | Post
#11
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(vassalle @ Nov 14 2006, 10:04 PM) just a question, why Asus P5B-Deluxe? Is it different than the cheaper variant, Asus P5B, other than the wifi, etc? P5B had only 2.1v on Vdimm, P5B-E/Plus/Deluxe had 2.45vdimm (or more for Deluxe version..Not too sure). 2.1v is just not enough to push some of high performance ram like Crucial 10th Anniversary or GSkill HZ series.U can get P5B-E (becareful with board revision) or P5B-E Plus if U dun want the Wifi and SLi feature. QUOTE(coolice @ Nov 14 2006, 10:16 PM) different board How much U got it and where? Post some comparison pls..since U used DS3, Biostar and now P5B-E plus ..i just got my p5b-e plus today..priming now QUOTE(cyberion86 @ Nov 15 2006, 12:18 AM) Thats really bad, max i can go was only 440. By the way, mind to share your oc result? how much vcore u applied to hit 400? Around 1.395vcore..This post has been edited by mikelanding: Nov 15 2006, 06:00 AM |
|
|
Nov 15 2006, 10:42 AM
Return to original view | Post
#12
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(boxsystem @ Nov 15 2006, 10:15 AM) i might posted this in the wrong thread, just need some opinion here from u guys who have bought and OC Conroe systems. Which mobo wud u guys recommend to get to pair it up with my E6600? When ask people to suggest/recommend...alway state out yr budget. SO wat is yr budget? |
|
|
Nov 15 2006, 10:44 AM
Return to original view | Post
#13
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(vassalle @ Nov 15 2006, 10:31 AM) where did you buy your mobo? how much was it? coolice, how much yr new mobo? 2 peoples asking liao still dun want to tell...  just saw the specs on asus website.. temptingg |
|
|
|
|
|
Nov 15 2006, 01:50 PM
Return to original view | Post
#14
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(boxsystem @ Nov 15 2006, 12:30 PM) sorry about that. let's just say i have 1k in hand for mobo. i'm thinking of hooking it up with DS3 coz i'm not much an OCer. but I heard ASUS is more stable? and currently i'm waiting for Intel chipset mobo that supports SLi. any ideas? 1k..get Nvidia 680i man....better than 976 chipset..thanks. very much appreciated. |
|
|
Nov 15 2006, 07:16 PM
Return to original view | Post
#15
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(coolice @ Nov 15 2006, 02:06 PM) since when there is a 976 chipset? wow...U cant tolerance typo mistake at all? btw..680i got bug with quad core QUOTE(boxsystem @ Nov 15 2006, 02:16 PM) i dont think 680i is in malaysia yet? QUOTE(remysix @ Nov 15 2006, 07:08 PM) a lot of things not in malaysia but somewhow somebody managed to get it from somewhere... eVGA 680i mobo already at VR-Zone (Singapore) MO (Mass Order aka Bulk Order)...so it wont be very long to reach us here... |
|
|
Nov 17 2006, 11:46 PM
Return to original view | Post
#16
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(cks2k2 @ Nov 17 2006, 11:32 PM) Joining the C2D OC club... Ya...75C on load is not cool at all. There are Scythe Infinity on sale from Rlhh...I am sure it will cool down at least 10C compare to stock.Everything on stock: stock HSF, stock VCore, VDimm etc... E6700 @ 3.15GHz @ 1.325V (stock) 315 x 10 5-5-5-15 512x2 Corsair DDR2 1.8V 1:1 P5B Deluxe Orthos stable 6+ hrs Max temp on stock HSF: 75C on CoreTemp Tried but failed on 317 so 315 is the max I can go on stock. Thinking of dropping multi before having to bump up voltage. I seriously need to get a better HSF. |
|
|
Nov 19 2006, 12:12 PM
Return to original view | Post
#17
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(siauann @ Nov 19 2006, 11:31 AM) ABIT IN9 32X MAX Are U sure U google enough? Here is 1 review from VR-Zone about eVGA n680i http://sg.vr-zone.com/?i=4215. Sanko who got the mobo plan to sell it by the way...want to buy and make a review here? anyone with nF680i Sli mobo yet? i cant find any review btw seems like we dun have any abit user yet in this thread...i wonder how the AW9D MAX perform  i guess its time i retired from 'gila' pc / oc.. makes me broke~ U might want to check out the n680i chipset review. They compare a lot with intel P975 and P965. http://www.xbitlabs.com/articles/chipsets/...e-680i-sli.html This post has been edited by mikelanding: Nov 19 2006, 12:19 PM |
|
|
Nov 29 2006, 06:31 PM
Return to original view | Post
#18
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(remysix @ Nov 29 2006, 12:48 PM) shud i ask or shud i not...ask away je la... is a bug ..happen on me as well...but is nothing serious...cpu-z still report correct timing.just got the 10th Anni ram...and run the memtest...my rig=sig. run the proc wif x6 multiplier, and ram at x2, push the fsb to 495...so the ram shud be 495 x 2 = 990@44412 and proc is 495 x 6 = 2970...fine boot up ok...masuk memtest...running the test #5...then i noticed the Proc was reported as 3465 which is 495 x 7 ??? i wonder is it just memtest misreported my C2D clock or what? and btw, i think some results will be reported shortly... I running 1000Mhz 4-4-4-10 @ 2.3V..rock stable...  Able to boot in 1025Mhz 5-4-4-12 @ 2.3V just now...but havent able to find a sweet spot for my Vcore...will update u all later Update: I plan to flash DS3 to bios F8i...see it will help my OC result or not... This post has been edited by mikelanding: Nov 29 2006, 06:43 PM |
|
|
Nov 30 2006, 12:28 AM
Return to original view | Post
#19
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(prescott @ Nov 30 2006, 12:00 AM) I think he might talking P5B Deluxe. By the way, mind to share ur OC result for P5B-E Plus? Ya...post some OC result...lot of good reviesw on this mobo on hitting FSB500. |
|
|
Dec 1 2006, 11:16 AM
Return to original view | Post
#20
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(toughnut @ Dec 1 2006, 09:21 AM) does ALL KVR 533mhz can be OC to 900mhz and beyond? 6400 is a good budget choice if U want to hit 3.2GHz and beyond.... i'm jumping to C2D side this this month other component in my list: 1. C2D E6400 (from bulk, probably) 2. Gigabyte DS3 or Asus P5B-E+ 3. AC Freezer Pro 7 Limit RM1.7k any comment or recommendation? wanna OC heavily. btw, how much is asus p5b-e+? Asus P5BE+ is around Rm670, but is a good board with more chance to hit higher FSB than DS3. About the KVR, it depend on wat ram chip...famous KVR chip are C4 which can go higher. Happy OC.....Cheer |
|
Topic ClosedOptions
|
| Change to: |  0.0452sec
 0.44
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 01:02 AM |
Quote
