hw much vdimm u feed?

waiting yehlai screenie of tat fantastic ram
of cz my hynix cant compare wif ur micron

my setting cant pass prime test
mayb need more vcore n looser timings

seems like V2 not so active
got a question here...anyone using hynix C4 here running ddr1000? wats the best timing and vdimm? i seems not to be able to tune it stable

i tried 5-6-5-15 @ +0.4vdimm oso kenot pass orthos @ ddr1000
only can pass super pi 32m

This post has been edited by siauann: Nov 11 2006, 11:14 PM

i wanna test the max C4 can go mah..like many says ddr1000 can do

CL4? guess its a bit hard rite? coz now on CL5 oso not stable
tried 5-6-5-15 2.2vdimm fail orthos
i'l try ur setting

i tot vcore only need if running higher clock speed?
im not sure tho'..stil noob oc'er mayb i'l pump more vcore n see wat happen

stil on hynix bro...nobody sells cheap D9..mjoe no more stock rite?

i oso wish i can get on hold of D9 but if i were to switch i will get 1gbx2..cz now running 512mbx2 liao...

wah...u frm UK izit? wanna get that C4 ah?

ur ocz ram no good in oc ka? wanna downgrade?
can i knw hw oc-able is ur ocz ram? i might consider it since its a 2gb kit

This post has been edited by siauann: Nov 12 2006, 07:35 PM

aiyo~ i dint knw u wanna sell lar
cz i see u sell ur team xtreme tot ur using ths D9GKX
then ur still on the team xtreme ram now? or using new ram again?

im running 24/7 @ 430x7 @ 1.35vcore @ 5-4-5-12 @ 2.0vdimm
vmch and vfsb =0.1v

i heard some ppl says oem performs better?
im not sure though'..mayb oem using better pcb than the kvr?
dunno lar

im same too...i lower multiplier to x6 but the speed shows in orthos is x7

well...i did suggest it back in V1 thread...
btw like wat tampoi says it will be hard rite now
perhaps shd make new list? mayb with list of stable oc instead of highest oc?

yeah...nforce 680 is just great

DS4 got heatpipe design for chipset cooler while DS3 dun

ABIT IN9 32X MAX

anyone with nF680i Sli mobo yet? i cant find any review

btw seems like we dun have any abit user yet in this thread...i wonder how the AW9D MAX perform

i guess its time i retired from 'gila' pc / oc..
makes me broke~

This post has been edited by siauann: Nov 19 2006, 11:32 AM

well...mayb my english not that good wat i mean is the abit nf680i sli based mobo..not nf680i sli chipset mobo cz i did read bout the evga mobo


oh...abit only january..
btw sanko~
hws the 680 perform? dint share any results here?
urs is the evga?


well...i dun understand fsb oc and clock...
does u means that the allendale wrks better wif 965 chipset cz the clocks is lower..and in order to achieve high oc need to pump high fsb to get higher clock speed? while the 975 is better with those proc with higher speed? then oc high speed doesnt requires a high fsb?
im not sure though...need some professional explanation

wah lan t3chn0m4nc3r...
whn i visit ths thread i feels funny lar..i wonder u dunno how to use the edit button izit? keep posting n posting

anyway long time no oc results n ths thread only fulls of *&*^&%$%^$^#

i wonder some of our bro here got their crucial 10th anniversary yet o not...im waiting for results for tat ram pair wif C2D

for DS3 users do u guys set max vfsb and vmch to oc?

dood...i got same thgs liek u last time...i was playing wif the multiplier n set 450x6 = 2700...but thn whn i prime orthos the orthos report as 450x7 = 3150
im not sure wats wrong n not sure wic is the correct speed...cpu-z shows 450x6 speed
im waiting for the long waited crucial 10th aniversary oc results

haha..i rmber ths ahpaul
hw much ur selling the P5B-E plus?
btw i heard tat the P5B-E Deluxe oso comes wif non wifi rite?

ops...my mistakes...i was refering to P5B Deluxe

im oledi got no mood for oc liao...now i start to undervolt..
here's some results...not much to brat about cz i knw a lot can do far more better than this...but im stil goin lower..

now running @ 400x7 @ 2800 @ 1.30vcore
vdimm 2.0 @ 5-4-4-12 DDR800
vmch +0.1
vfsb +0.1





but acording to ET 5 one screenie shows vcore 1.28 n other one is 1.30

This post has been edited by siauann: Nov 30 2006, 06:24 PM

2.1ghz? r u sure o not? mayb ur contact between the proc and the base of the hsf is not 100% contact? infinty shd perform a lot better thn my "lousy" hyper 48
my load temp is 62-63ºc as shown..

i dunno lar...cz im tired of gaining high oc liao...so decide to undervolt for the fun...
reaching 2.8 wif stock voltage is normal i guess...so i try lowering vcore...
so far running @ 1.28 orthos 18hr ++ now...memory test 9k ++ %..load temps is 60-62ºc i discover tat 1.325v and 1.28v temp not much difference