Is Shinan same as Hingan on Lazada ?

that what i knew by asking hingan

might be the same seller but using 2 different name on lazada

continuing from previous post https://forum.lowyat.net/index.php?showtopi...ost&p=109480264

Rare 1995 Honda Integra Engine used oil sample!


Rare 1995 Honda Integra Manual Transmission used oil sample!



My friend's 2017 facelifted GT86 engine oil samples, both are Liqui Moly 0w20

after hearing so much horror story on fake EO, can recommend any EO selling online which is decent and genuine

can read more here on this post. Summary buy at Shopee Mall/ Lotus or Petrol Station at Retail Price.

hmm, seems that those recommended above sell quite expensive EO, does it mean that cheaper EO are suspect of not being genuine?

is there a difference betweek sucking oil from dipstick tube and draining from the drain plug ? which one is better?

Base on personal over 1000 time++ oil change experience

If engine is hot if oil cap ada bukak Drain plug is faster , the con probably if someone overtightened the drain plug well either changing oil pan or changing drain nut, welding the oil nut etc i guess?

Suction the tube is tiny take some time too delicate too tedious movings the tank, plug in the compress air tube, no physical muscle use for opening nut, no need go underneath is needed, so far i never heard the suction tube is putus and stuck at dipstick or oil pan, good for beginners i guess? Also probably is the only choice for drain plug is permanent welded without want to changing oil pan.

Unless engine full of sludge drain plugs or suction don't help reduce residue either

This post has been edited by zuozi: May 18 2024, 01:23 PM

so which one clear the old engine oil, suction machine or just manual drain plug?

Both will get the job done.

so i think its best to just use the vacuum machine.

those drain plug always lose its thread after many2 years.

number 1 cause of engine oil leaking.

just hope the pomen dont keep quiet if the tube somehow putus inside.

Based on experience watching, not doing it, my regular workshop use suction machine. It makes my car need more EO vs drain oil, cz with suction, the balance 1L bottle is almost empty. But with drain it balance half

This post has been edited by ayamxxx: May 18 2024, 07:12 PM

Bought many times frm Vanli my H Eo 0-20w,all good.

Draining from drain plug is always better. As you are ascertain that all the old oil are drained out.

Suction needs to move the tube around and will not extract all the oil out.

My car has been 14 years and no such issue noted because I DIY to ensure things are in accordance to spec.

It will occur if the mechanic over tighten the bolt which it tends to happen.

Recently i saw many vidoes with workshop using flushing machines where they use machine to flow in and out eo. Just like engine flush method but with help of pump machine.. This method should be best

Theres also another where they drain old eo, then use pump to push out residual oil that wont flow out naturally, easily half a liter more old oil came out

I never actually know how engine flushing work via machine, if you want me to guess Probably via oil filter housing with all the attachment kind of stuff i guess? And got to use alternative cleaning agent because impossible to use engine oil which is not effective in cold is thick unless the machine can heat up the engine oil and also engine oil is expensive if machine can heat up the cleaning agent also a good for cleaning

I don't think you need frequent machine engine flushing if you do oil change frequently , also i don't think you can overflow the engine without leak during flush.

Example Compressor flush via machine in Malaysia minimum already RM 250 and above.

Why not shortened EO change by half regularly then ,without those additional cleaners oils fr flushing.

Workshop Sales marketing mouth working ok