Thanks for the clarification. I learn something new today.......

just wan to ask all the expert here..

i just got the E6400 + DS4...
how am i go to overclock it with the lower tempurate...

btw, i got 4 stick of 512 ddr II 800Mhz ram..

lastly i would like to know wat is the good timing for the ram?

about the CPU: FSB ratio...
isnt we need to make it to 1:1 ratio?? like this is better?

Temperature increase is caused by you upping the voltage to keep the new overclocked speed stable. So the more you up the voltage the more your temps will increase. Its up to you what temps you are comfortable with for 24/7 or everyday usage.

1:1 is definitely better, but nowadays, it does not really make a big difference.

This post has been edited by kcnyc: Oct 27 2006, 09:26 AM

btw, i notice when i start my pc..
my temp for the processor onli 24C ... wow.. so happy..

but when i check with everest... it state there CPU 25 CPU1 41 CPU2 42

so which one i should refer too..

btw, i have try to overclock until 400MHz * 8 = 3200MHz...
then temp increse like hell ..
if not mistake around 5+ something...

PS.. i still got ot BT to cool down the processor..

5+ which mean 42+5?
47 was the idle temp or load?

in gigabyte DS4 i think it state the ratio as 2:2 instead of 1:1

i mean tat is around 50< x < 60

where to get the info?? i get the from 1.36 CPUz

Is it normal for my stock 6300 to be running at around 50c ? At stock.

depend on situation & environtment
mostly it is normal

Just got my Ninja and installed it, oh boy it's huge, barely fit my casing . Meanwhile i will let the pictures do the talking , expecting the temperature to go down a bit once the AS5 cure

Load

Idle


This post has been edited by Bliz: Oct 27 2006, 08:01 PM

Time to go with higher speeds already?

See if i got mood to try, i have a feeling that it will be a constant restart once it goes pass 3ghz, sure need lotsa tweaking

hrmm... using xp90 here. vcore = 1.37, idle = 47, load = 54. guess it's quite ok.

better than mine liao ler bro...i m using scythe mine ler...

i'm paring it with tt smartfan only. using TAT to read the temp. trying to get a new heatsink actually cause using xp90 since dfi days. lol. kinda outdated.

I am using "old day" XP-120...taking too much foot space...blockin part of NB...cannot put good NB HSF on it..

The result also not so good...E6400@3.44GHz around 72C load from TAT...

u meant to say that the temp 54c@Load is from TAT...well, if u r using xp90 and got that temp, u r sure a lucky one...

This post has been edited by remysix: Oct 27 2006, 11:13 PM

nowadays with this conroe when someone said my temp at full load is XXc...i'm a bit confuse coz dunno whether he meant ET5 reading or CoreTemp reading or is it TAT reading...last time (Opty time) quite simple...either SpeedFan or MBM which mostly does not differ much...

my cpu temp frm ET5 is 38-39ºc...TAT reads 54-55ºc... E6300 running @ 2.8ghz only...cooled by hyper48 wif vantec moded fan...

weird thg is frm ET5 the system temp shows 42ºc...(ppl says is NB temp im not sure)
when i strip off side panel the system temp shows 47ºc!!!!! but my cpu temp drop! suppose wif side panel off we get lower temp rite?

This post has been edited by siauann: Oct 28 2006, 12:35 AM

As 4 scythe cooler, infinity or ninja rev.b is better 4 a E6400?

wanna get either 1 4 my upcoming rig.

few reviews said infinity is better than ninja. My vote go to infinity as well...