Intel® Core(tm)2 Duo Overclocking Board, Report your issues/results here.
|
|
 Aug 30 2006, 07:00 AM
Return to original view | Post
#1
|
 
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach  
|
i'll be joining the club today
 will be assembling my ds4+e6300 right after b'fast... hope to get a good result and no problem like those mentioned in XS and VR forum...quite scarry also since a lot of $$ has been invested. any tips on DS4 setting...what need to be disabled, etc... kinda new in intel oc...been in amd camp for quite sometime. |
|
|
|
|
|
Aug 31 2006, 07:27 AM
Return to original view | Post
#2
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Aug 30 2006, 07:29 AM) welcome to the forces bro thanks bro... lookin' towards for ur setup result u've been greatest OC for amd, sure no prob wif intel   all day setting up the rig... did something stoooopid  b4 setting the c2d...dl the F3 bios...good! install everything and flashed to F3...good! so, proceed with to install OS on RAID...arrghhh...forgot to copy the damn RAID driver...and i left my laptop floppy at the office...cracking my head how to get the driver in the floppy... this mobo does have some problem with the power i think...when switched it ON, the cpu fan started barely and then stopped, kinda not enuff juice je...and then started again and sometime just the system just shutted off...second time or third baru ok... anyway, having problem of setting up the os with RAID0...maybe i just install the os on single hdd... now running memtest86+...gonna wait for 30 rounds of #5, if ok, then install the os... booting and 430x7=3.1Ghz at stock...dunno whether can load os or not... running: E6300 L626A541 430x7 stock intel hsf GA-965P-DS4 w/ F3 Bios 512Mb x 2 Kingston DDR2 667 - KTC --> Kingston IC -- not a good oc'er  vcore = stock vdimm = +0.2 gmch = +0.2 gfsb = +0.2 pcie = +0.1 temp is not so good...idle (in BIOS) already 55c...and that is at stock vcore  This post has been edited by remysix: Aug 31 2006, 07:28 AM |
|
|
Aug 31 2006, 10:20 AM
Return to original view | Post
#3
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Aug 31 2006, 09:05 AM) ^ ic.. kvr wif epilda/ micron chippy overclock well. they atleast can get 450FSB. mine is DS4...so non-beta official is F3 right now.regarding the temp, tot i ady mention here its lil' hotter. for BIOS, just proceed wif F4, its the latest BIOS & very nice gud luck OC wif ur e6300 maybe later when hit the wall, i use the official beta one. i know it's hot...but at idle wif that temp, wonder how hi will it be when i start priming anyway...do what i must for the sake of OC |
|
|
Aug 31 2006, 05:32 PM
Return to original view | Post
#4
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(teohwk @ Aug 31 2006, 03:59 PM) Where to find this P5W DH ah? I've been hunting high and low all around KL for 1 months already. Dam desperate to get one. Anyone knows? cycom got what...quite pricey...RM1050...went there 2 days ago...btw...i'm priming using Orthos at 450x7 = 3.15Ghz now, passed 3 hours. hope no prob This post has been edited by remysix: Aug 31 2006, 05:33 PM |
|
|
Aug 31 2006, 06:12 PM
Return to original view | Post
#5
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(teohwk @ Aug 31 2006, 05:54 PM) Where got? i just went there 3 hours ago. The Rm1050 mobo was P5B Deluxe Wifi lar.... Oooopps  only saw P5.. Deluxe...hehehe |
|
|
Aug 31 2006, 07:21 PM
Return to original view | Post
#6
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(ddww @ Aug 31 2006, 07:18 PM) hei hei hei... u missed out my name... im from the oil town too... oil town...u guys must be filthy rich...got some WC to lend me???  running 32M SuperPI at 472x7=3.3Ghz now... This post has been edited by remysix: Aug 31 2006, 07:22 PM |
|
|
|
|
|
Aug 31 2006, 09:46 PM
Return to original view | Post
#7
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Aug 31 2006, 09:04 PM) wahh.. very fast trigger ehh?? btw, running using divider ka?? wat the vcore??  mem divider? ofcourse...dont think my KVR wif KTC chip can do >1000Mhz one... ran the 32M wif default vcore...well i presumed 'Normal CPU Voltage' as per BIOS is default voltage...1.3v...cpu-z showing 1.376v...easytune showed 1.4v...tonite, b4 sleep gonna run the Orthos at 3.3G... my ram is limiting my OC...managed to run 1M at DDR970 only...will post the screenie later...now using my lappy, smoking at the balcony  i guess i know what items i need next: a DDR800 ram and prolly a good HSF...typhoon or ninja? |
|
|
Aug 31 2006, 10:27 PM
Return to original view | Post
#8
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Aug 31 2006, 09:59 PM) ya laa kinda curious leh this one is yet to be confirmed stable since didnt do the stress test yet...tomorrow should know...but the temp is waaaaayyy too hi la...75c during priming...scarry one...if opty last time, should wont there becoz after e6300 reach passed the 3.2Ghz barrier, it need atleast 1.47v-1.5v to stable. mostly i c 1.5v above to feed more juice  |
|
|
Aug 31 2006, 11:04 PM
Return to original view | Post
#9
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
yaaa...those PresHot days...wasnt there but know about it...
the temp kinda scare me couse based on Core Temp...my MaxCase is 85...during priming, both core were at 83c...even thou easytune showed 75c...worry the temp might puting the wall on my oc...that's why need to get a better HSF... hmmm...gonna run the priming now... edited: the screenie at 485x7 mem timing: 5-8-8-23 (set to Auto) vcore = default - 1.3v in BIOS Mobo: GA-965P-DS4 Cooling: Intel stock HSF 
This post has been edited by remysix: Aug 31 2006, 11:45 PM |
|
|
Aug 31 2006, 11:48 PM
Return to original view | Post
#10
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
quick one...how do you view the detail setting of ur mem when u set everything AUTO in BIOS...MemSet2.1 does not 965P chipset
This post has been edited by remysix: Aug 31 2006, 11:48 PM |
|
|
Sep 1 2006, 06:34 AM
Return to original view | Post
#11
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Aug 31 2006, 11:51 PM) ^ nice clock there dood heeheh...that xp120 canno use no more liao since i gatal2 tangan did some modding to it's bracket for my naked opty last time...so need to get another hsf and seriously FAST coz the temp is killing me! btw, i tot u using those giagantic(XP-120) hsf?? QUOTE(ddww @ Sep 1 2006, 02:41 AM) how come your 485MHz x 7 can only do 17s++ in 1M?? i can reach 16.9 with 483 but feed quite alot voltage to my CPU there (1.45v)... and one more thing, you got a very nice vcore there... < 1.4v dunno why couldnt get close or better than u...maybe the timing too loose...still not sure what's the best setting for the mem...that's why i wanna know if there is an apps that i can use to view the mem setting like MemSet2.1...so i use it as my basis to tighten up the timing... Edited : and also the vdimm, i have to feed my RAM till 2.4v at 5-4-4-9. ur ram is taking 2.4v?  mmm...not sure also what is the max vdimm generally can this mem can take in...mmm...maybe i just up a wittle bit more and see if the fsb could increase. thanks This post has been edited by remysix: Sep 1 2006, 07:41 AM |
|
|
Sep 1 2006, 07:15 AM
Return to original view | Post
#12
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
oooitt...there IS 2.2beta...didnt come across that one...thanks bro.
will try to get it...now, where shud i look? EDITED: ok, found it. updated: priming at 472x7=3Ghz @ stock vcore...5 hrs 17 min and counting...gonna stop at 8hr coz the temp is way too hi...84-87c This post has been edited by remysix: Sep 1 2006, 07:55 AM |
|
|
Sep 1 2006, 08:56 AM
Return to original view | Post
#13
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Sep 1 2006, 08:24 AM) hahaa.. wait until i get my active RAMs cooling active cooling???just 80mm fan will be enuff, rite...i put on 1x80mm blowing directly to the ram and another 80mm to the NB...sure i feed more juice to my RAMs.. now passing 7hr mark...another one hour, gonna stop it and let it rest a bit...and then put some more juice to the ram, and push to 3.4Ghz this is fun! |
|
|
|
|
|
Sep 1 2006, 09:53 AM
Return to original view | Post
#14
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Sep 1 2006, 09:39 AM) yepp 80mm fan enuff de but the prob is, i dont have the holder for the fan i dont think u psu gonna make any complaints...he is the Coolest Giant ever even side panel oso dont have, so ady order from our moding pro here hope can trigger more fun  ps : hoping my giagantic psu wont bottle neck, ady runnig 120mm fan x3 & 80mm fan x1, all is high speed wan.. btw, for ATX_12V-2X (check ur manual), u plugged it in using 4-pin or 8 pin. dont know what it will do but from the manual it will supply the power to the CPU...so if using 4 pins...2 pins will be for +12V...if 8 pins, 4 pins for +12V. i plugged the 8 pins, just to make sure the CPU got really enuff juice. Update: another 4 minutes to reach 8 hrs priming This post has been edited by remysix: Sep 1 2006, 09:55 AM |
|
|
Sep 1 2006, 10:26 AM
Return to original view | Post
#15
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Sep 1 2006, 10:05 AM) err.. for the ATX 12V, i use the 8pin connector since it stick together.. ok edi i think...i'm using 2x120mm and 5x80mm fan with 3 hdd plus one optical...and 7900gt summore while the single 4pin, i make it to connect the 24pin(20+4) my setup ok ka?? i asked coz before yesterday, i plugged in 4 pin using 8-to-4 pin converter...forgot to take out the converter since used that one during my AMD tenure already passed 8 hrs of priming...going out to the bank shortly, so i think i just let it run another one hour... |
|
|
Sep 1 2006, 10:47 AM
Return to original view | Post
#16
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(tAmp0i @ Sep 1 2006, 10:41 AM) I think that is not default Vcore if you look at his previous 1M screenshot, EasyTuner says 1.38v unless remysix manually set it to 1.325v that's why i'm quite confuse with the 'default vcore' terms...in BIOS it say Normal CPU Voltage = 1.30...so, for the CPU Voltage, i didnt put any additional voltage...so, i'd consider it default vcore since no overvoltage is set... in easytune, it showed 1.41v and in cpu-z showed 1.36~1.37v... so, how to know u r running at default vcore? and then there is the V-Droop factor doing overvoltage even 0.1v in BIOS, cpuz will report <1.3v??? sorry...intel noob's here  and yes, for 485x7...it was not default...put some overvoltage, didnt remember how much @ddww yup...472x7 shud be 3.3...hehehe...need to retake my basic math This post has been edited by remysix: Sep 1 2006, 10:49 AM |
|
|
Sep 1 2006, 11:04 AM
Return to original view | Post
#17
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(gengstapo @ Sep 1 2006, 10:47 AM) he using divider la prend, sure no need alot vcore just make sure it stay connected and 'ketat'...yeah, i connect the ATX 4pin using 8pin(another 4 extra) connector from my psu becoz it has onli 1 dedicated 4pin(from psu) which i combined wif my 20pin to make it 24pin i thinks its should be ok but the prob, i afraid later it will loosen since the 8pin punya tempat sangkut kenot sangkut to the 4pin ATX.. going out now...to the bank |
|
|
Sep 1 2006, 12:13 PM
Return to original view | Post
#18
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
passed 10 hrs priming at 472x3=3.3Ghz (this time i got it rite
) in the furnace 
next step, put more vdimm and do the 1M and 32M SuperPI...priming will only be done at night unless i can get a good hsf this afternoon |
|
|
Sep 1 2006, 03:02 PM
Return to original view | Post
#19
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(pcmoddingmy @ Sep 1 2006, 02:11 PM) Nice clocking at stock Vcore there. mine is L626A541...guess it's Week 26 then... Is yours a week 27 or 26? But 89ºC at stock Vcore seems crazy... and I thought Prescotts were supposed to be hotter QUOTE(tAmp0i @ Sep 1 2006, 02:15 PM) When you set 'Normal' in bios, it will choose automatically that is why you get 1.41v in EasyTuner. You have to manually set it aiseh havent Gigabyte knows the word 'Auto'. Normal is normal, nothing special.now i need to redo it again...aiya!!! thanks bro, for informing. This post has been edited by remysix: Sep 1 2006, 03:03 PM |
|
|
Sep 2 2006, 02:53 PM
Return to original view | Post
#20
|
|
Senior Member
1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach
|
QUOTE(Austin @ Sep 2 2006, 12:05 PM) Some photos of the Gigabyte P965-DQ6 I bought, comparing to the DS4. kingston ram...same chip as mine - KTC...but mine is 512mb module...max i can do is DDR970...via easytune...if from bios, cannot boot...that one wif 2.1vdimm...more vdimm does not give any extra Mhz...prolly hit the wall...hope urs can do better, bro...but 4Gb??? The only advantages DA6 have are lower temperature and more stable power, less voltage fluctuation  DQ6 wif SLI...actually using driver hack...but sound interesting http://www.xbitlabs.com/web/display/20060626163001.html performance wise...dunno This post has been edited by remysix: Sep 2 2006, 04:57 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0453sec
 0.99
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 12:26 AM |
Quote