well i wish u can reach higher than i managed.. 

btw i did a quick test, running cinebench between AMD Opteron 170 & Intel Core 2 Duo E6600

testbed AMD:

AMD Opteron 170  @ 2.7ghz 270x10
2x 1024mb Gskill HZ 3-4-4-8 @ 270mhz
256mb Nvidia 7800GTX
DFI Lanparty Ultra D
Hiper Type R 580w
Windows XP Sp2

testbed Intel:

Intel Core 2 Duo E6600 @ 2.7ghz 300x9
2x 1024mb Mushkin 5-4-4-15 @ 600mhz
512mb ATi Radeon X1900XTX
Gigabyte 965P DQ6
Thermaltake Toughpower 700w
Windows XP Sp2

Rendering (1 CPU) : AMD 57secs, Intel 51secs

Rendering (x CPU) : AMD 31secs, Intel 27secs

ur is aircond room?

IDLE or FULL LOAD?

same as my situation loh.....I getting table fan to blow on the whole board soon 

16 seconds breached with TG DDR2-667 at 490MHz 4-4-4-12 2.1v only, E6300 at 3.43GHz. Settings is Vdimm +0.3v, PCI-E normal, FSB +0.2v, Gmch +0.3v, Vcore 1.425v
I hope all the TG owner would be very pleased with this....

my fren with DS3 got some problem

1. Cannot boot without CD in the CD-ROM drive. Will freeze at post screen. Will boot like normal only when there is a CD (any CD) inside the drive.
2. Cannot overclock from BIOS. Setting will reboot to default speed. Overclocking is only possible through software in Windows. The only thing can change in BIOS is just the RAM divider and timing. Any changes to the FSB (not even 1MHz) is possible through BIOS.

DS3 has been flashed to D4.

if yes, u might be lucky to have c2d with a good contact betwen ihs and core.

Off topic a bit but I thought u guys might find it interesting:

http://www.xtremesystems.org/forums/showthread.php?t=111574

Setup:
Kentsfield E6700 2,67GHz Quad
Asus P5W DH bios 801
G.Skill 8000GBHZ@ 3-3-3-4-2-A-D
OCZ Powerstream 600W sli
Club 3D Geforce 7950GX2@air with no mods
Mousepot copper
LN2

well, currently wanna upgrade/ change my RAMs onli
some of ur might able to get higher clock wif urs CVS.. mebi mine not the best like ur all
but, atleast mine can do 400FSB from default 333Mhz

kira ok larr. currently im trying to reach atleast 420FSB, but kenot get. my CVS maxx vdimm until 2.0V(0.2+) onli & when i put 2.1V keep rebooting all the ways. the highest i can get wif my CVS which is passed dual super PI 32mb, able to finnish 3dmark programes was at 410FSB onli   

dang boriiiinngg..

yupp.. thinking the same de   
btw, u using wat kinda RAMs, capasity & brand arr??

only maintain at 72c at 1.550v

guys ddr II 553  512mb can be used ornot on e6300?

my current result for E6300 Super PI 1M is 16.500s. I will post it tomorrow. My target is 15.XXX s, I dun't know I can do this or not...

For doing overclocking , what softwares we hav to use?? i am a newbie oso.. ~  like for overclocking proc use wat? ram ? is it the gigabyte free software can make it? pro plz tell in full explaination

The problem is can't disable! Even I setting "Always On", It's still enable EIST... 

Try dual prime to show us stablility

I will try to prime it later, because too urgent to test. I think I can let it prime stable at 3.4Ghz, Why I know? because my friend use it at 3.4Ghz to do converting video files one night non-stop & no problem. But I still wanna to test it, wait for my news. I know you work at BB.

guys, i just want to know have any of clockers have used MSI 975x Platinum Power Up Edition..... if so how far u guys have been with this mobo(with stock fan) ..? any tips..?  i tried till 3.2 G but then it not stable..... it hangs... even OC to 2.5 make pc hang....

a noob question  : do i need disable Intel SpeedStep to OC ?

What is the best price for this?

Can compare C2D E6300 with AM2?