Not until MCMC approved 6Ghz band I guess

I am more interested in the ZenWiFi Pro though

Already can get 500Mbps on every corner with XT8. Doubt the ET8 gonna be a lot faster.

https://edgeup.asus.com/2021/zenwifi-pro-et...nwifi-pro-xt12/

Not until MCMC approved 6Ghz band I guess

I am more interested in the ZenWiFi Pro though

Already can get 500Mbps on every corner with XT8. Doubt the ET8 gonna be a lot faster.

ET8 is WIFI 6E right i think signal short ranger right if fair ranger will weak signal ?
explain 10 meter away wifi 6E will signal weak right ???

Technically signal penetration is slightly weaker on 6Ghz but the channel is cleaner so it will provide better speed + better stability.

To put it on layman terms, it's like 1 bar of 5Ghz is faster and more stable than 3 bar on 2.4Ghz.

We only have 2 non-overlapping 80Mhz channel on 5Ghz if we don't count the DFS channels. Not to mention that 160Mhz on 5Ghz is crippled as it will always involve DFS.

If we have access to all channels on 6Ghz, there're actually up to 14 non-overlapping channels for 80Mhz bandwidth, 7 for 160Mhz.

Yo, need advise here. My Lan port 3 is being allocated to VoiP and I am using Maxis Fibre. Question is, If i dont want the VoiP and I want the Lan 3 port to be the normal port (Same as port 1,2,4) how do I do it?

Using RT-AC66U_B1

Let me clarify.. .

I'm using rt-ac67u twin pack, in a full wireless setup, on a 5000 sqft bungalow house with unifi 500mbps. I want to upgrade to a new router and keep these 2 units as nodes, still in a wireless setup.I placed router on ground floor,  connected to TV box via Ethernet.  On same floor, I have the node in a bedroom 10m away, it is connect to the box via Ethernet as well.

Intending to keep one ac67u as node on second floor,  I don't know which WiFi 6 model to choose? Is AX56U, AX92U , AX3000 or AX82U a better choice? Especially, considering the compatibility issue of Wi-Fi 6 router pairing with WiFi 5 node.

Can someone help explain the pro and con of these 4 models as the router?

Hi, I just change my fibre from maxis to digi fibre and since then I can't connect to my Asus ddns. Its show error invalid IP address, can anyone advice whats the problem ya?

joeyrm
WTA, do you use any cooling for the router?

I do use fan for both of my AC86u & AX86u 

I do use fan for both of my AC86u & AX86u 

WaNaWe900
Thanks, currently using a notebook cooler for my AC88u, does run abit hot, was wondering how to cool the AX11000.

my AC68U without cooling fan noting problem
AX11000 this no need cooling fan i saw youtube linus tips he use AX11000 but without cooling fan noting problem

[tng55]
Mine not really a problem too, just prefer to keep it cooler.

okey you buy cooler

but i also don't need it cooler 

WaNaWe900
Thanks, currently using a notebook cooler for my AC88u, does run abit hot, was wondering how to cool the AX11000.

https://shopee.com.my/Acrylic-board-router-...7548.1971532002

Using this for the modem and AX82U..I barely can feel the heat even in afternoon..like no power on