wow aztech 600E,..

i guess many still have, probably in store room collect dust or death already, LOL,.

This is a legendary modem, although the age, it still support ADSL 2+

yeah, it was the best one at that period,.

my friend still have it, in store room, with permanent koma situation, LOL

Anything expensive is always nice.
My personal recommendation is TPLINK - WR1043ND

Ever tried D-link modems? Quite stable.

Bummer asked TM about 8mb no port and too far yet my road was listed. Maybe still too early for my area to have it.

my uncle manager of TM....still only use the 1mbps as coverage thing..hahaha....even my place has all except time and yes

my uncle manager of TM....still only use the 1mbps as coverage thing..hahaha....even my place has all except time and yes

I still have Aztech DSL600E, still functioning and upgraded to latest firmware...
LOL, I still remember how GOLDEN it is in 2006 (and how n00b I am).

btw guys, i now have a dsl modem Aztech DSL305E working in bridge mode connected to a wireless router, how do I access my modem through the wireless router??

Yeah. Am still using my old trusty 600EW bought on May 2005. Still working perfectly on my 4mbps line
Cost me a bomb back then purchasing the modem

Appreciate those who answer and assist me here

Juz called 100 n they mentioned my Tel Number is available for 4Mbps only. 8Mbps ta dak
My landed house already 13 yrs and at the moment using 0.384Mbps Streamyx. Pls dun laugh at me.
1.) Is my Old copper line support 4Mbps?
2.) Will i get a stable 3.3~4Mbps without frequent DC
3.) Will i get support from any TM technician to assist me getting a Stable 3.3~4Mbps speed if i subscibe this package? Or risk bare by me .

Here is my Riger datas. Thanks

Downstream Upstream
SNR Margin (dB): 33.0 29.0
Attenuation (dB): 14.0 5.0
Output Power (dBm): 11.9 16.6
Attainable Rate (Kbps):11840 1248
Rate (Kbps): 1024 384

With that status, your home already support 4mbps (8mbps too?)
How about you make an appointment with TM technician to check your house.
If not, just register online with TM reseller - just like me.

Here is my ADSL status of my 4mbps:

Update Counter : 38590
Modulation : ADSL2+
Annex Mode : Annex A/L
Line State : up
Lan Tx : 2519750
Lan Rx : 1322406
ADSL Tx : 1164554
ADSL Rx : 1940822
CRC Down : 0
CRC Up : 145
FEC Down : 0
FEC Up : 277
HEC Down : 154
HEC Up : 0
*SNR Up : 22.4
*SNR Down : 30.9
*Line Attenuation Up : 13.0
*Line Attenuation Down : 24.0
Data Rate Up : 507
Data Rate Down : 5099

*SNR: Higher the better
*Attenuation: Lower the better

If your line can't support 4Mbps they don't suggest you to upgrade, if they said it's supported then it should be.

funny thing if line good enough for 4mbps, why 8mbps can? since it their requirement to be 1.5km form nearest dlsam

Probably DSLAM issue. IINM our area is already fibre ready, just waiting for the unifi to come here.
Even now my 4Mbps is running ADSL_G.dmt, not ADSL2+. Attainable rate is around 10Mbps, that's really stretching the capabilities of non ADSL2+ mode. So far, I can assume that its hardware limitation.

edit : I was wrongly capped before, 5Mbps/1Mbps (attainable 10Mbps/1Mbps), I used my upload bandwidth up 70kB/s and my connection went haywire, ping shoot up to 2k MS to local sites, could not load anything.

This post has been edited by nymerine: Jan 15 2013, 08:30 PM

Fiber? at where oo?

i at taman kerjasama didnt see any fiber cable hanging at TM pole?

just check my modem status, yes it running ADSL 2plus




This post has been edited by thpace: Jan 15 2013, 08:43 PM

Can check here : http://sams.tm.net.my/MarketingCenter/search.asp
Put your streamyx login @ customer login.
Look at "J" column, if the result is F, means its fibre infrastructure, if result is "ticked" means its copper infrastructure.
Source : A guy working with TM posted this in this thread lots of pages ago.

meaning fiber coming to our area?

but my 4mbps is since 2009, and the status have a "F" sign.. 2009 got fiber ad meh? or just some bull crap hahaha

Mine is F all the while since 2010, from what I've been told by someone that the interstate fibre network by TM available in my kampung area, but the purpose is not to serve the local and yes the nearest TM cabinet I can see the printed code started with V (VDSL?). I assumed I am getting good speed with my previous 1mbps, 4mbps and current 8mbps are due to this, copper line from house to cabinet and tumpang fibre to the rest.

This post has been edited by powerwoot: Jan 15 2013, 08:56 PM

this i can confrim

last time before i always walk past the an empty slot, One day TM come and install a DSLAM server at that empty area. So every day otw to class i see what they do. Once i saw they take a fiber cable and connect to the servers install inside.

How to know it fiber? Well there a special techniques used to connect fiber cable and a special equipments, one small box and there two cable end will be put together into the machine. Viola, the cable is join. Plus the distinctive bright yellow cable normally associate with fiber cable