magic of VS? :-p

could be u close one of the aircond vent?
i faced the same weird noise last week, sent to SC, the technician immediately know what's wrong...
i close the aircond vent on passenger side...

i found that the reverse sensor is quite slow to gv me signal when i am reversing...

Yup those were exactly what i heard. The eek eek sound and also the wind/gas sound.
Thanks for your explanation.

Agreed

today when i reverse...just 1 dit...then i stop a while then after stop..it deeeeeeeeeeeeeeeeeeeee...walau...cannot reverse faster...if i reverse a bit faster then sure hit the van...scare scare...

reverse slow slow

Deeeeeeeeeeeeeeeeeeeeee....BANG

Saw WhiTe LiGHTeR already put one in his car isn't it?

Pictars. We demand pictars !!

I always wanted to fix a reverse cam on my preve...but after strong objection from my wife and learning day by day (reversing)... now i can roughly gauge the distance while reversing...haha..

been doing side parking in narrow streets in malacca! fear of dropping down to the drains!

y object?

---

Added on July 10, 2012, 10:14 amyer...busuk hati-nya...but shld be...dit...BANG...deeeeeeeeeeeeeee....

This post has been edited by deity01: Jul 10 2012, 10:14 AM

is it the 'CAUSE' of the cranking sound? if it is true, so SA should teach new owner how to start the car properly..

[quote=deity01,Jul 10 2012, 11:12 AM]
y object?

She said don't waste $$$$...leave the money for petrol better still...hahha...

well...now i still wont go install...but when my child know how to walk...i sure will go install a reverse cam....

This post has been edited by deity01: Jul 10 2012, 10:18 AM

never ever leave your kids in the car porch...always take note that

also nowadays quite dangerous if you are not living in a G&G neighborhood.
when open your gate, robbers come barging in.

of cos...but sometimes u just cant smells the accident...

live in a G&G neighborhood still the same...my neighbor at another street just kena...

The best is just be careful and alert ya guys... It's better to be safe then sorry

By the way, just to share with you guys about my road trip to Melaka last weekend. The handling of the car is really steady and good (I drove Accord 2.0 1997 model....very long liao and reminds me of my old accord (sold already!))

I used cruise control all the way however there are some annoyances such as when the car is going down slope (mild slope along the highway) you will feel the engine braking when it is trying to maintain the speed at 110km/h and not pumping any fuel to it (can see it through instant fuel l/100km is 0.0l/km)..other than that is superb...acceleration using the cruise control stick is responsive and instant effect!

Just press pedal from 110km/hr and you will feel the car is responding quickly and immediately climb up to 120km/hr when you need more power to overtake

Overall very satisfy with the car! but fuel consumption is a little high maybe i am still under 1,000km...now doing around 500km... the FC is around 10.5l/100km




This post has been edited by chickyyuan: Jul 10 2012, 10:31 AM

Yupp..i agree with u. That's why i urge my wife to just use the simplest starting procedure (insert key fob, press brake pedal & press the start button) every time regardless a cold start or whatsoever. I did practice the same with my Forte too..no problem with it until now (2 years 3 months already).

Fortunately after over a month owning a Preve, there's no starting problem occurred. Only several time the Preve failed to start due to i released the brake pedal too early while cranking. That's because i'm too used to my Forte (the brake can be released when the car start cranking). While for the Preve, we only can release the brake after the car finish cranking. Touch wood..hopefully the Preve will serve us well in years to come No major issue as of now..& FC also consider acceptable averaging at 8.xL/100km driving mostly in Alor Setar town

guys, on the One Way Valve issue, after change it to a new one, is there any possibilities of the problem re-occur? as from my readings, the OWV is because of the oil not sticking enough on the valve after being left unstarted or cold... seems like re-occuring issue for me.. or i got the readings wrongly?!?!