Good news, Internet is working already. Now testing VoIP.
Here is the settings for Shibby's Tomato Firmware for Asus RT-N16.

---

Added on July 17, 2012, 12:37 amjssc,
Need some clarification from you.
Your Thomson router connections is it Thomson WAN port connect to your TP-Link Port1 or Port2?
Can you let me know which Thomson LED lights is on and what are the colour?

Thanks.


This post has been edited by thamch: Jul 17 2012, 12:37 AM


Attached thumbnail(s)

I connect to TPLink LAN1 (on the router), in the firmware is port2. is abit confuse for openwrt.. the port1 is WAN port.


thomson , the broadband, voip1, voip2, power much on. all is green color.

jssc,
Let me get this right.

Fiber <---> Huawei(black box) - LAN Port 2 <------> WAN Port-(TP Link)-LAN Port 1 <----> Thomson Router(Voice Only).

As for the Thomson Light, may I know the Internet light is Off or is Green or is Red?
Possible the snap a photo of your Thomson light while the phone is hooked?

During my setup, I assume your CPU is WAN port :-) and and work.

Later today going to try to setup the router again following your settings. Thanks.


This post has been edited by thamch: Jul 17 2012, 09:52 AM

Those who using Maxis FTTH with custom router, do you think of using VoIP adapter and totally throw away the thomson router?
adapter like this
http://www.voipsupply.com/grandstream-gs-286
http://www.voipsupply.com/m-ata
setup maybe like plugin this adapter to one of the port of custom router and setup vlan to the port and setup sip in the router? not sure if it works that way..

Anyone willing to try it out? I dont have Maxis FTTH so cant test it out..

This post has been edited by ywkwy: Jul 17 2012, 10:14 AM

the internet light is off.

if your using openwrt.. the CPU is not WAN port.
and if you settings up the vlan 822..you can't tag on CPU...

cause vlan 822 is for VOIP and not for internet

---

Added on July 17, 2012, 11:18 amone more thing to inform the VoIP1 and VoIP2 will light up once it able to register with maxis. whether phone is connect or not.

This post has been edited by jssc: Jul 17 2012, 11:18 AM

You are making progress here. You can use all ports 2-4 to connect to the internet since you have set thm to untag VLAN ID 621 packets.

Jssc uses port 1 to connect to his Thompson router for VoIP access.

Since the router supplied by Maxis is set to untag 822 by default, create another rule for 822 (VLAN #3)
Under this ruling(VLAN# 3, VLAN ID 822),
Tick(port bind) and tagged PORT 1 - Very important

Leave the rest untouched(empty)

Set bridge = WAN

Save and reboot.

Good bro, i got asus Rt-n12 C1 recently flashed it to shibby tomatousb firmware....
So i can follow your configuration for mine...hehe...
but my Masix installtion have to wait till next month...

i got get 1 d-link dvg-2100s, and try setup the voip but fail

Tried all possible methods for VoIP, none is working.
VID=822, Port1 tagged -- VoIP failed.
VID=822, Port1 tagged, WAN Port tagged -- VoIP failed.
VID=822, Port1 YES - VoIP failed.
VID=822, Port1 YES, WAN Port tagged - VoIP failed.

Cannot set bridge = WAN for VLAN#3. Getting error message "Only one VID can be used as WAN at any time".

Do suggest other possible settings.

Thomson Router WAN <---> LAN1(Asus RT-N16)

What is the option under the bridge?

And please list out all method u try together what bridge u choose.

LAN(br0) - Used for VLAN#1
WAN - Used for VLAN#2
LAN1(br1) - Greyed.
LAN2(br2) - Greyed.
LAN3(br3) - Greyed.

The WAN, LAN(br0) can be selected once only.
I've tried all possible combination already.

This post has been edited by thamch: Jul 17 2012, 09:03 PM


Attached thumbnail(s)

Is your VoIP phone working before this at your Thompson? Have you activate it with Maxis request yet?

For the VLAN# 3 ruling it's correct to check and tagged PORT1 only leaving the rest empty.
Can the bridge be left empty instead of WAN/br0/br1...? jssc's settings if off for the CPU meaning empty.

There might be some difference here between jccs's settings for the voip. The VoIP VLAN ID could be different in your area meaning it might not be 822...

The other method is to reverse the process by untagging at your ASUS RT-N16 (create VLAN ID=822) but leave port 1 untouched.
Then log into your Thompson and remove the VLAN ID=822 rule inside it for its VLAN settings inside.

Meaning if you untag and unbind port in your Asus, you no longer need to untag it in your Thompson. Just leave the VoIP account setting inside for the phone ports to work.

hi guy, I follow your settings but couldn't get mine to work May I know what model is your ONT? mine is an Huawei HG8240. can your share your WAN setting as well? or do I need to take note on anything special?

The phone is working with Thomson router. Is activated.
Once I connect via my Asus router, the phone1 and 2 doesn't light up.
Any idea how to configure it in Thomson router? An guide?
How to export out those settings to check those vlans?
Another way to confirm is some one lend me the tp-link router with openwrt so I can test it with thomson router.

This post has been edited by thamch: Jul 17 2012, 09:12 PM

r u using openwrt??

I using huawei HW850, and tplink wr1043 with openwrt... the thomson voip is working.

This post has been edited by jssc: Jul 17 2012, 09:15 PM

He's not using OpenWRT but the Tomato Shibby firmware instead.

There's one more DD-WRT instead.

All together got 3 major different variants.

Dear Sifus,

Just installed Maxis broadband on yesterday and after read all your post from page 1 till page 14. Decided and bought a TP-Link TL-WR1043ND device. Configured as per klseet.com using openwrt, but was unsuccessful at the end.

Few questions to seek advices from all the sifu here:

1. Is the configuration correct? i just copy from sifu jssc. Can anyone correct me if wrong?




2. When come to Network > Interfaces, do i have to add the IPTV as per klseet.com? or skip this step?




3. Is my username correct? i check on Thomson router, it shown 8xxxx@home.maxis.com.my



Will try again tomorrow. Need to get to bed now.
Thanks in advance.

It look like we can use either asus or tp link to replace the buggy Thomson

But which firmware was easily to setup ddwrt , openwrt , etc


?

I think is more easy if we show the taiko here how is the tomato shibby Vlan setup screen look like and all the setting that can do.

Please don't configure the iptv. Just skip the iptv settings.

Your name is correct. and the password just add 1 at the back. Exp.
username: 12345@home.maxis.com.my
Password: 123451

Just connect modem (lan2) to tplink (wan)
Thomson (wan) to tplink (lan1)

Make sure tplink. Power, sys, wan much got light