did it as in the first page suggested.

untick port binding and vlan tagging on LAN2 and tick port binding on LAN3 then submit.

any idea?

you should be connecting your router to LAN3 not LAN2 of the modem

This post has been edited by kenjixx: Jul 10 2012, 11:34 AM

i did

the initial setup comes with thomson WAN port connected to LAN2 , so i didn't change that.
then after the configuration on huawei and belkin, i connect the belkin WAN port to huawei LAN3.

it should work with any router right ?

try connect thomson router to LAN3 and test can it go online
if can then the problem must be your router

ok, will try your suggestion. Thanks man

---

Added on July 11, 2012, 9:33 amSigh couldn't work, probably my belkin doesn't dial the pppoe properly.

Anyway, I've set the belkin as AP to extend the THOMSON lan and turn off the THOMSON WiFi interface.

Although not optimal configurations but stability and reliability of WiFi increased and I'm happy now! !

Thanks

This post has been edited by mikeeeee: Jul 11 2012, 09:33 AM

Finally I can connect the TPlink router to Zte 931ii.

The default setting for the Lan Port is


Lan 2

Support Vlan Number : 4
Vlan ID 1: 621
Vlan ID 2: 821
Vlan ID 3: 822
Vlan ID 4: 823

PVID : NA


I tried to connect the TPlink router with this setting but failed, keep on request time out for PODO packets.

then i changed the setting as below and I able to connect with TPlink router.


Lan 2

Support Vlan Number : 0

PVID : 621


or

Lan 2

Support Vlan Number : 3
Vlan ID 1: 821
Vlan ID 2: 822
Vlan ID 3: 823


PVID : 621

I tried to connect Thomson to Lan 3 for VOIP but cannot, but before i able to connect with TPlink, I able to connect Thomson with VOIP by below setting,


Lan 3

Support Vlan Number : 3
Vlan ID 1: 821
Vlan ID 2: 822
Vlan ID 3: 823

PVID : NA


Any ideas?

This post has been edited by steventyy: Jul 11 2012, 09:58 AM

brought this up for confirmation..
would getting a voip adapter work ?
anyone which is adventurous enough to try?

still try for the voip adapter, maybe my setting wrong so cannot call

What's your setting?... How much does the voip adapter cost?

This post has been edited by gogetter83: Jul 11 2012, 02:26 PM

i using d-link dvg-2001s

Any remedy for landed properties?
Or does the router problem only happen to high-rise building users?

for landed property you will need a vlan tagging capable router
i.e. Asus RT-N13U
set it up properly and you are done

interesting, does it work. or you need to configure the adapter?

if it works along with customized router... we can kiss maxis thompson goodbye over their shitty overheating problems, wifi problems & free public wifi. because some ppl do see a user id "maxis" login to router. who the hell is that?

This post has been edited by toh2020: Jul 12 2012, 10:22 AM

finally, i finish the TP_Link TL-WR1043 to support the thompson as voip.. now still testing.. so far so good and the WR1043 also can get online by itself

This should be the easiest setup if confirm the thomson lan port r fine just wifi bad,& practically all wifi routers are workable. Disable thomson wifi oso shut off the unknown maxis wifi id effectively

no it can't work i still try to configure out, because i need more detail for the maxis voip setting.

You connect the TP-Link's WAN to Thompson's LAN port ?? Please share.

Finally I can connect my TPlink to Zte931ii for internet connection and Thomson for VOIP.

Dont know why, the sequence of the connection on LAN port does make different.

Next step is wait all sifu the find out how to connect the VOIP through the Zte modem

This post has been edited by steventyy: Jul 12 2012, 07:28 PM

i just add vlan on lan1...vlan 822.

so how i using WR1043 for internet then connect thomson to lan1 for VOIP..

u r using huawei btu or alcatel lucent?