So, only can use ADSL WIFI router but not ADSL Modem WIFI Router?

saw this manual on maxis page, which also teach to manually setting the modem include VOIP.

http://www.maxis.com.my/home/pdf/fiber%20i...Mbpspackage.pdf

Is this help to set the VOIP with the TM　modem?

Hi, noob question here,

which TPlink model that has VLAN-tagging capable that I can buy from lowyat?

Router WIFI N150 4pt TL-WR740N ?

TQ

But i try with the TPlink emulator, but i cant find any setting for Vlan,

http://www.tp-link.com/en/support/emulators/

can help??

For TL-WR741ND, google around and saw only V1 and V2....



dunno whether i still can get V1 and V2 or not...

very blur...

but i believe WR841ND still can use with Huawei HG655a by follow the method of the topic starter, right?

you got the model of Asus router?

TQ, with this Asus router, do I need to flash to custom firmware or I can set the Vlan with its original firmware and UI?

I got another noob question. if I cant get a Vlan tagging router, can i connect my router to thomson?

TM - Thomson (VOIP) - Own Router (WIFI & Qos) ??

Hi, need help, just now i try to config TPLink WR841N with Zte 931 at my parent house.

The Tm tech config the Lan1 with Unifi setting and Maxis using Lan2.

So i plan to connect thomson to Lan 2 and WR841N to Lan 3.

In Zte configuration;

Under Port Binding, for 621, I untick Lan 2 and tick Lan 3.

Under Vlan Trunk, for Lan 2:

Supported Vlan number i change from 4 to 3,
and choose 821, 822 and 823 as Vlan ID, I remove 621 from here.

Under Vlan Trunk Lan 3,

Supported Vlan number I put 1,
set Vlan ID as 621.
PVID as NA.

After this, I restart all device.

Now Thomson connect to Lan 2 and WR841N connect to Lan 3.

The VOIP phone is working, but WR841N unable to connect to internet.

Under system log file, it show error, time out waiting for PADO packets,

Any sifu got any idea?

Hi, want to confirm is it the password for connection is + 1 behind your account number?

If I dun wish to use VOIP, can i directly plug in TPlink router to the Lan port that thomson use?

Finally I can connect the TPlink router to Zte 931ii.

The default setting for the Lan Port is


Lan 2

Support Vlan Number : 4
Vlan ID 1: 621
Vlan ID 2: 821
Vlan ID 3: 822
Vlan ID 4: 823

PVID : NA


I tried to connect the TPlink router with this setting but failed, keep on request time out for PODO packets.

then i changed the setting as below and I able to connect with TPlink router.


Lan 2

Support Vlan Number : 0

PVID : 621


or

Lan 2

Support Vlan Number : 3
Vlan ID 1: 821
Vlan ID 2: 822
Vlan ID 3: 823


PVID : 621

I tried to connect Thomson to Lan 3 for VOIP but cannot, but before i able to connect with TPlink, I able to connect Thomson with VOIP by below setting,


Lan 3

Support Vlan Number : 3
Vlan ID 1: 821
Vlan ID 2: 822
Vlan ID 3: 823

PVID : NA


Any ideas?

This post has been edited by steventyy: Jul 11 2012, 09:58 AM

Finally I can connect my TPlink to Zte931ii for internet connection and Thomson for VOIP.

Dont know why, the sequence of the connection on LAN port does make different.

Next step is wait all sifu the find out how to connect the VOIP through the Zte modem

This post has been edited by steventyy: Jul 12 2012, 07:28 PM

hi all,

need help here, can some one send me the default setting for the TM Zte modem default setting? i lost my backup.

TQTQ..