If I'm not mistaken, it means that the line is connected but sometimes it doesn't have signals even if it's connected. I don't know, this is from what I see..

Hi guys, here's my Linksys WAG200G (all-in-one) reading:

Downstream Margin: 23db
Upstream Margin: 23db
Downstream Line Attenuation: 41db
Upstream Line Attenuation: 19db

Is my dsl gateway ok? I wonder why it keeps disconnecting me just after 10 ~ 30 minutes. When it disconnect my PC, I can even log into the dsl gateway... need to turn off and on then it'll be back online...

Could it be that I didn't use the hard reboot in the linksys menu when I first configure it?

ADSL Status

ADSL status shows the ADSL physical layer status.

ADSL Firmware Version: 4.03.03.00 - 3.02.00.03 - 4.02.01.00 Annex A - 01.07.02 - 0.49
ADSL Software Version: V2.01B02T02.MA.20060728
Line State Connected
Modulation Multi-mode
Annex Mode ANNEX_A
Max Tx Power -38 dBm/Hz

Item Downstream Upstream Unit
SNR Margin 4 6 dB
Line Attenuation 41 19 dB
Data Rate 8064 704 kbps

Is this normal? i'm having a lot of disconnection. can it be fix thru my side or i have to call streamyx and "F" them up side down?

This post has been edited by manfisto: Jun 16 2007, 11:08 PM

Wow, ur snr margin is poor.. But line attenution still ok..Btw, why ur data rate 8064? 8mb package??

This post has been edited by adriankhoo153: Jun 17 2007, 12:23 AM

I wonder if it's normal for having so many errored seconds:



306 .. in 3 hours ..

This post has been edited by Irzani: Jun 17 2007, 12:52 AM

Loading a picture from imageshak take ages man. I wonder if their server something wrong it's just our streamyx. I feel like all imageshack is damn slow!

Are you using the splitter with the free router/modem? That thing can mess up your connection (based on personal experince yesterday morning ).

The connection all slow and just plain bad. Remove that crap and the speed turned to normal (a day b4 it works just fine, weird).

Same as me. Not sure it's streamyx coz I noticed this long time ago =\

This post has been edited by ahpek26: Jun 17 2007, 02:37 AM

thxs for those replies. i didnt use any splitter. my old plain modem just broken so i changed to this DSL-504T and upgraded it to the latest firmware. for the first few weeks its still ok. now it disconnect so damn fking many times i'm tired with it. any suggestion or opinion on this case?

btw, my package is just a normal RM88 not sure why i got that 8mbps with me but anyway i cant reach 8mbps, its just crapshit.

ADSL Firmware Ver : FwVer:3.3.2.5_A_TC3084 HwVer:T14.F7_0.0
Line State : Showtime
Modulation : G.DMT
Annex Mode : ANNEX_A

Downstream Upstream
SNR Margin : 8.0 13.0 db
Line Attenuation : 63.5 31.5 db
Data Rate : 1024 512 kbps


Is the stat above is ok for my connection? I'm having problem with this streamyx of mine..felt slow..and utorrent can only reach max speed of 15kB/s..previously can reach up to 60 and above..

not ok i think
your line attenuation too high

should i complaint to streamyx then? what should i tell them if i have to complaint to them?

I just changed my telephone wiring from the cheap flat type to the twisted pair type and it increased my DS/US SNR Margin by about 4-5db!

Who did it for you, how much you pay for it and how to apply?

Item Downstream Upstream Unit
SNR Margin 19 20 dB
Line Attenuation 15 7 dB
Data Rate 1024 384 kbps

The above was measured when I'm connected to streamyx using my friend's 1mbps id and using DLink DSL-500T.. So far connection stable and I never experience disconnection...

I get much higher SNR margin (above 30dB) when I'm using Aztech DSL-600EW...

This post has been edited by willkso: Jun 20 2007, 01:31 AM

Hahaha... I did it myself lor!!!

Just buy the twisted pair wire to as long as you need (don't know how much it cost because friend gave me). Buy the RJ11 connectors 2 pcs or more just in case rosak (it cost me 80sen each). I didn't have crimper so I just used plier and after that connect it.

Very simple!!!

that one you change the cable that already in side the house one..but how about the cable that came in from the telephone pole into your house..mine one here i see they used the black flat cable..something like the old cable used for portable television antenna

hello there, recently I've been facing very frequent disconnection, and i called up tmnet and i think they changed the port for me as the IP range I'm getting is now all 60.XX, and previously i get 218 and 219 IPs. Can any of you help me see if the status of mine is good or poor?

Modem Status
Connection Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 1536
US Margin 23
DS Margin 21
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 41
US Line Attenuation 24
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 129
CRC Tx Fast 1
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path

Seems ok with me, but I think the noise level is a bit high. What modem are you using?

Aztech DSL605E, its a new modem i bought last week heh....

It happens right after you purchased your new modem? Or the old one also the same thing?