Outline ·
[ Standard ] ·
Linear+
Streamyx Streamyx SNR Margin, --Read here if you face disconnections--
|
FrozenPrince
|
Jun 18 2007, 03:51 PM
|
New Member
|
ADSL Firmware Ver : FwVer:3.3.2.5_A_TC3084 HwVer:T14.F7_0.0 Line State : Showtime Modulation : G.DMT Annex Mode : ANNEX_A Downstream Upstream SNR Margin : 8.0 13.0 db Line Attenuation : 63.5 31.5 db Data Rate : 1024 512 kbps
Is the stat above is ok for my connection? I'm having problem with this streamyx of mine..felt slow..and utorrent can only reach max speed of 15kB/s..previously can reach up to 60 and above..
|
|
|
|
|
|
FrozenPrince
|
Jun 18 2007, 04:27 PM
|
New Member
|
should i complaint to streamyx then? what should i tell them if i have to complaint to them?
|
|
|
|
|
|
FrozenPrince
|
Jun 20 2007, 09:17 PM
|
New Member
|
that one you change the cable that already in side the house one..but how about the cable that came in from the telephone pole into your house..mine one here i see they used the black flat cable..something like the old cable used for portable television antenna
|
|
|
|
|
|
FrozenPrince
|
Jun 23 2007, 03:47 AM
|
New Member
|
I've just give streamyx tech support a call friday evening to asked them about the my high line attenuation which is 63.5 dB...From a wbsite i read it says that for 1Mbps connection..the ideal length between the originated port and the location of the other own should be around 6km to get a line attenuation of 20dB..i called them and asked..they told me that from the main port/server to my place..the distance is only 4 km..and i asked them back..how come the line attenuation high..It seems that he got no idea and tell me to restart my modem instead coz i've been using it for 16 hours without reset it. The guy was preety polite thou compared to previous one i have called before..huhu..
So do you guys have any other opinion on how to get the line attenuation lower than my current 63.5 dB? I'm currently staying in melaka..ayer keroh..MMU here..Does changing to a new modem then th current bilion modem would help or i need to change the telephone cable here? My house phone, when called outside it felt like talking so far..like suara kelam-kelam..does that play any part in this?
|
|
|
|
|
|
FrozenPrince
|
Jul 10 2007, 01:37 PM
|
New Member
|
QUOTE(rontgen @ Jun 28 2007, 09:58 PM) Wah... ur attenuation veli veli high man!!! mine at d same area just aroung 8dB onli! so izzit ur line got alot of noice? n mayb ur line 2 old oledi... need rewiring! using any spliltter? I am using splitter. I tried to connect it direct without splitter. Still the same line attenuation i get. The phone got no noise but when i called felt like talking to people very2 far..can't really hear properly. the voice not clear. I seems to think that the problem here is the line it self. If wanna rewiring mean..start rewiring from where? From the phone poll to the house or inside the house one only?
|
|
|
|
|
|
FrozenPrince
|
Jul 10 2007, 08:57 PM
|
New Member
|
yup..it is always like that...i should try and give them a call by this week if possible..thanks
|
|
|
|
|