Finally, i almost want to buy the RB4011 already,thanks for your news.
If i didn't saw your post i might buy it on 25 July from shopee...

Wonderful setup.

This post has been edited by go626201: Jul 21 2021, 01:05 PM

Should be available very shortly from now. If Australians prices to be taken into context, Malaysia's prices should be similar to RB4011iGS when it first appears in SubTel's shop.

Damn... I Just got the RB4011 4 months ago.

I already ask SubTel on shopee,but seems like they still didn't have estimate time for RB5009.

Great news! Can't wait to get it hehe
My last RB was RB2011 series, since then I just bough the hAP series and hEX

Hi. May i ask is it possible the hap ac2 USB port able to power a rPi 3 model B or not?

RB5009 intro video

It is now listed on the mikrotik website!

https://mikrotik.com/product/rb5009ug_s_in
https://mikrotik.com/products/group/ethernet-routers

USD219


This post has been edited by mhwee: Aug 2 2021, 11:04 AM

Guys, I have checked with a Mikrotik Disty for the RB 5009. The product is ready for importation. You can contact them for booking. RSP is RM948.00. I have already indicated my intention to get one. It is not listed on their site yet.

https://ecommerce.synchroweb.com/index.php?...rmation/contact





This post has been edited by megablur: Aug 5 2021, 09:52 AM

Got estimated stock time?
I just asked Subtel too,waiting for their replies.

Edit:
I had order from Subtel, estimated times - 3-5 weeks.
Order Price : RM999 included delivery fee.

This post has been edited by go626201: Aug 5 2021, 03:27 PM

I just asked, the indication is around 2 weeks if they can consolidate a minimum order qty of 10 units. *provided the shipment process is not delayed.

So should be similar timeframe to Subtel, already one weeks past,so 2-4 weeks later will delivered.
Because I saw from mikrotik forum,seems like RouterOS 7 will be public release on 23 August 2021 Europe time. (So should be on 24 Aug 2021 in Malaysia)

Hi all, I've been doing some speedtest on my Mikrotik Hex S. It seems that I can only go up to ~ 160 Mbps download speed on the router. At the router side, 1x CPU core is running at 100%. Also, when I tried using 2 different computers to run speedtest (speedtest.tm.com.my), it is still one stream.

It seems like:
1- network packets to/fomr a website only uses 1 core.
2- 1 core limit is ~ 160 Mbps.

Has anyone successfully pushed the Hex S to beyond 160 Mbps in a single core with speedtest?

Did you enable fasttrack? i think without fasttrack run about 200+mbps is normal. (To be clear i am using hEX)

Yes, I'm using Fasttrack. One suspicion is I have VLAN filtering turned on at the bridge. I'll disable it tonight and try again.

hoping this model got wifi spec..

I still hit a speedtest speed limit at 160-170 Mbps. I believe it's the Unifi VLAN translation (VLAN500 interface) in Miktrotik; one core hits 100% usage at 170 Mbps. I did a LAN-to-LAN speedtest (webfig, HAP ac3 to HEX S) and I got 450 Mbps one way. My assumption is the VLAN500 interface program is not multi-threaded.

Rather than doing more daisy chaining (HEX S -> Router/bridge -> modem), I may get an RB5009 instead . Unless someone has a great idea .

Anybody managed to get the RB5009 already? Please share review.

Still haven't reach Malaysia i think...
Some country got stock on 3 September 2021.
So should need 1-2 more week to arrive...

I waiting Subtel to inform the status.
I Pre-order from Subtel already.
(Seems like if this batch finish need wait until November to get the new batch)

After 2 full months of waiting, finally get my RB5009 from Subtel.







This post has been edited by go626201: Oct 5 2021, 03:39 PM