Hi guys, any wired router to recommend?
Using Unifi 800mbps and vpn.
if have PoE out will be better

You may want to buy hEX s or hEX PoE

https://mikrotik.com/product/hex_s

https://mikrotik.com/product/RB960PGS

Either both of them are good for packet processing and also for ipsec vpn. The hEX s has only 1 port passive PoE out and the hEX PoE has 4 af/at PoE out. Your choice.

hAP AC2 is quite good. It’ll route around 750Mbps without Fasttrack but it doesn’t have PoE out. This is what I’m using atm.

If Fasttrack is going to be used all the time then the Hex S that gaara suggested is perfect. I had the Hex (same but no SFP nor PoE) for awhile and it was a great router.

Next up is a big jump in price, RB4011. RB3011 also can but personally I’ll skip this one.

This post has been edited by soonwai: Apr 11 2021, 04:21 AM

I would like to block the mikrotik to lease IP addresses to unregistered MAC addresses, anyone know how to configure in mikrotik?



This post has been edited by mamakap: Apr 30 2021, 08:48 AM

You will need to change the ARP in LAN ports/Bridge to accept reply only. Then you will need to change the address pool on DHCP to use static-only, also do not forget to tick the option Add ARP for leases.

Thanks, by the way anyone facing difficulty access mikrotik website? I seem having difficulty accessing there website, sometime can load the page but sometime its just stop loading the website.

same with me, looks like there is something wrong with tm unifi. I tried access using vpn works fine.

Disable IPv6 and see if Mikrotik website can load or not.

yup confirmed it is IPv6 problem and it seems from mikrotik ends, so tm unifi is not the problem. it is mikrotik ipv6 address.

Ok is confirm, it is IPv6 issue, I blocked IPv6 traffic on my network, now I can access the website.

But I am kinda curious, browsers always use happy eyeballs also called fast fallback when it try to access a website. In case the ipv6 failed it will fallback to ipv4. But not in this situation, this is quite weird.

Interesting... lately got a lot ip block listed on my router due to port scan. Maybe is false alarm?

This post has been edited by mamakap: May 20 2021, 03:44 PM

Hi! MikroTik Malaysia Gurus,

I need some tips how to get my MikroTik RB750Gr3 (home router) on TMnet Unifi 300Mbps Fiber Internet via PPPoE at ether1 main link to failover to ether2 backup link via neighbour relatives wifi link via MikroTik RBD52G (Router-Bridge) CPE Router mode on wifi 5G link configuration.

Thanks

Rodyeo

This post has been edited by rodyeo: Jun 4 2021, 09:37 PM

I had something like this:

UniFi30#1 ------ RB2011(my router) ------ hAP Lite ---{wifi}--- Asus RT-N2D1(Neighbour) ------ UniFi30#2

Guides that I used:
Mikrotik Dual WAN PCC Load Balancing
Mikrotik Wiki: PCC

Mine was PCC load balancing but if you can load balancing, you can also do failover.

Ori post here: https://forum.lowyat.net/index.php?showtopi...post&p=83909578

There is a lot of ways to do failover. You can use route distance by specifying check gateway or you can use script to check the gateway and disable/enable the default route automatically. Other ways is by using mangle rules to create PCC. Your choice

hi, i want to ask about vrrp and vlan

i have 2 unifi tm line, i wan to setup pcc load balance.

so i need to vrrp first than vlan
or vlan first than vrrp??


router is rb750gr3

lan 1 is empty, netinstall backup
lan 2 is btu in
lan 3 - 5 bridge LAN out

This post has been edited by delaciox: Jun 10 2021, 10:45 PM

Hi guys ,do you think this year will have a new generation(RB5011) to RB4011?

Currently using RB750Gr3-800Mbps Unifi,but sometimes the cpu burst to 40%,and vpn client sometimes fast sometimes slow.
I want to buy new mikrotik router but scared later the new generation one coming...And I will depressed....

Why don't consider use server / pc and install routeros 😏😏

That too high electric usage,and also need to buy license not worth i think.

But u got really high cpu performance 👍